|
AECMA PREN 3406 |
Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head with Dome, in Aluminium Alloy 2117, Anodized or Chromated, Metric Series-Issue P 1 |
|
AECMA PREN 3407 |
Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head, in Aluminium alloy 2117, Anodized or Chromated, Metric Series-Issue P 1 |
|
AECMA PREN 3408 |
Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head, in Aluminium Alloy 2017A, Metric Series-Issue P 1 |
|
AECMA PREN 3409 |
Aerospace Series - Rivets, Solid, Universal Head in Aluminium 1050A, Metric Series |
|
AECMA PREN 3409 |
Aerospace Series Rivets, Solid, Universal Head, in Aluminium 1050A, Metric Series-Edition P 1 |
|
AECMA PREN 3411 |
Aerospace Series Rivets, Solid, Universal Head, in Aluminium Alloy 2017A, Metric Series |
|
AECMA PREN 3411 |
Aerospace Series Rivets, Solid, Universal Head, in Aluminium Alloy 2017A, Metric Series-Issue P 1 |
|
AECMA PREN 3412 |
Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head with Dome, in Aluminium Alloy 5056A, Anodized or Chromated, Metric Series-Issue P 1 |
|
AECMA PREN 3413 |
Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head with Dome, in Aluminium Alloy 7050, Metric Series |
|
AECMA PREN 3413 |
Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head with Dome, in Aluminium Alloy 7050, Metric Series-Issue P 1 |
|
AECMA PREN 3414 |
Aerospace Series Rivets, Solid, Universal Head, in Corrosion Resisting Steel FE-PA92HT, Passivated, Metric Series-Edition P 1 |
|
AECMA PREN 3415 |
Aerospace Series Rivets, Solid, 100 Degrees Countersunk Normal Head, in Corrosion Resisting Steel FE-PA92HT, Passivated, Metric Series-Edition P 1 |
|
AECMA PREN 3416 |
Aerospace Series Rivets, Solid, Universal Head, in Nickel Base Alloy NI-P11, Cadmium Plated, Metric Series |
|
AECMA PREN 3416 |
Aerospace Series Rivets, Solid, Universal Head, in Nickel Base Alloy NI-P11, Cadmium Plated, Metric Series-Issue P 1 |
|
AECMA PREN 3417 |
Aerospace Series Rivets, Solid, Universal Head, in Nickel Base Alloy NI-P11, Metric Series |
|
AECMA PREN 3417 |
Aerospace Series Rivets, Solid, Universal Head, in Nickel Base Alloy NI-P11, Metric Series-Issue P 1 |
|
AECMA PREN 3418 |
Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head, in Nickel Base Alloy NI-P11, Cadmium Plated, Metric Series |
|
AECMA PREN 3418 |
Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head, in Nickel Base Alloy NI-P11, Cadmium Plated, Metric Series-Issue P 1 |
|
AECMA PREN 3419 |
Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head, in Nickel Base Alloy NI-P11, Metric Series |
|
AECMA PREN 3419 |
Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head, in Nickel Base Alloy NI-P11, Metric Series-Issue P 1 |
|
AECMA PREN 3420 |
Aerospace Series Rivets, Solid, Universal Head, in Corrosion Resisting Steel FE-PA11, Passivated, Metric Series-Edition P 1 |
|
AECMA PREN 3421 |
Aerospace Series Rivets, Solid, 100 Degrees Countersunk Normal Head, in Corrosion Resisting Steel FE-PA11, Passivated, Metric Series-Edition P 1 |
|
AECMA PREN 3422 |
Aerospace Series Rivets, Solid, Universal Head, in Titanium TI-P02, Anodized, Metric Series-Edition P 1 |
|
AECMA PREN 3423 |
Aerospace Series Rivets, Solid, 100 Degrees Countersunk Normal Head, in Titanium TI-P02, Anodized, Metric Series-Edition P 1 |
|
AECMA PREN 3424 |
Aerospace Series Rivets, Solid, Universal Head, in Titanium Alloy Ti 45,5 Cb, Metric Series-Issue P 1 |
|
AECMA PREN 3425 |
Aeospace Series Groove Dimensions for Axial Mounting Internal Type Retaining Rings-Issue P 1 |
|
AECMA PREN 3426 |
Aerospace Series Groove Dimensions for Axial Mounting External Type Retaining Rings-Issue P 1 |
|
AECMA PREN 3427 |
Aerospace Series Groove Dimensions for Radial Mounting Retaining Rings-Issue P 1 |
|
AECMA PREN 3432 |
Aerospace Series Lockwashers Steel, Cadmium Plated-Issue P 1 |
|
AECMA PREN 3432 |
Aerospace Series Lockwashers Steel, Cadmium Plated-Issue P 1 |
|
AECMA PREN 3432 |
Aerospace Series Lockwashers, Steel, Cadmium Plated-Edition P 2; Withdrawn - Not Replaced |
|
AECMA PREN 3433 |
Aerospace Series Lockwashers Heat Resisting Steel, Passivated-Issue P 1 |
|
AECMA PREN 3433 |
Aerospace Series Lockwashers Heat Resisting Steel, Passivated-Issue P 1 |
|
AECMA PREN 3434 |
Aerospace Series Nuts, Hexagon, Slotted / Castellated, Self-Locking, in Steel, Cadmium Plated, MoS2 Lubricated Classification: 900 MPa (at Ambient Temperature)/235 Degrees C-Edition P 3 |
|
AECMA PREN 3434 |
Aerospace Series Nuts, Hexagon, Slotted/Castellated, Self-Locking, in Steel, Cadmium Plated, MoS2 Lubricated Classification: 900 MPa (at Ambient Temperature)/235 Degrees C-Edition P 2 |
|
AECMA PREN 3435 |
Aerospace Series Nuts, Anchor, Self-Locking, Floating, Two Lug, Reduced Series, with Counterbore, in Heat Resisting Steel, MoS2 Lubricated Classification: 1 100 MPa (at Ambient Temperature)/315 Degrees C-Edition P 1; Corrigendum |
|
AECMA PREN 3436 |
Aerospace Series Lead-Acid Batteries for Aircraft of Format A Type Product Standard-Edition P 1 |
|
AECMA PREN 3437 |
Aerospace Series Lead-Acid Batteries for Aircraft of Format B Type Product Standard-Edition P 1 |
|
AECMA PREN 3438 |
Aerospace Series Lead-Acid Batteries for Aircraft of Format C Type Product Standard-Edition P 1 |
|
AECMA PREN 3439 |
Aerospace Series Lead-Acid Batteries for Aircraft of Format D Type Product Standard-Edition P 1 |
|
AECMA PREN 3441 |
Aerospace Series Titanium TI-P99001 Annealed Sheet and Strip, Hot Rolled a Less Than or Equal to 6 mm 290 MPa Less Than or Equal to Rm Less Than or Equal to 420 MPa-Edition P 2 |
|
AECMA PREN 3442 |
Aerospace Series Titanium TI-P99002 Annealed Sheet and Strip, Hot Rolled a Less Than or Equal to 6 mm 390 MPa Less Than or Equal to Rm Less Than or Equal to MPa-Edition P 2 |
|
AECMA PREN 3442 |
Titanium TI-P02 Annealed 390 Less Than or Equal to Rm Less Than or Equal to 540 MPa Sheet and Strip, Hot Rolled A Less Than or Equal to 6 mm |
|
AECMA PREN 3443 |
Aerospace Series Titanium TI-P99003 Annealed Sheet and Strip, Hot Rolled a Less Than or Equal to 6 mm 570 MPa Less Than or Equal to Rm Less Than or Equal to MPa-Edition P 2 |
|
AECMA PREN 3443 |
Titanium TI-P04 Annealed 570 Less Than or Equal to Rm Less Than or Equal to 730 MPa Sheet and Strip, Hot Rolled A Less Than or Equal to 6 mm |
|
AECMA PREN 3444 |
Aerospace Series Bolts, Large Bihexagonal Head, Close Tolerance Normal Shank, Medium Length Thread, in Heat Resisting Nickel Base Alloy, Passivated Classification: 1 250 MPa (at Ambient Temperature) / 650 Degrees C-Edition P 1 |
|
AECMA PREN 3445 |
Aerospace Series Guidelines for the Permissible Storage Life of Rubber Products |
|
AECMA PREN 3446 |
Aerospace Series Bearings, Precision Ball Without Flange in Corrosion Resisting Steel, for Instruments and Equipment Dimensions and Loads-Edition 1 |
|
AECMA PREN 3451 |
Aerospace Series Titanium TI-P99002 not Heat Treated Grade 2 Forging Stock, for Annealed Forgings a or D Less Than or Equal to 300 mm-Edition P 2 |
|
AECMA PREN 3451 |
Titanium TI-P02 Not Heat Treated Reference Heat Treatment: Annealed Grade 2 Forging Stock De Less Than or Equal to 300 mm |
|
AECMA PREN 3452 |
Aerospace Series Titanium TI-P99002 Grade 2 Annealed Forgings De Less Than or Equal to 150 mm-Edition P 2 |
|
AECMA PREN 3452 |
Titanium TI-P02 Annealed 390 Less Than or Equal to Rm Less Than or Equal to 540 MPa Forgings De Less Than or Equal to 150 mm |
|
AECMA PREN 3453 |
Titanium TI-P04 Not Heat Treated Reference Heat Treatment: Annealed Grade 2 Forging Stock De Less Than or Equal to 300 mm |
|
AECMA PREN 3454 |
Aerospace Series Titanium Alloy TI-P19001 not Heat Treated Grade 2 Forging Stock, for Annealed Forgings a or D Less Than or Equal to 300 mm-Edition P2 |
|
AECMA PREN 3455 |
Aerospace Series Titanium Alloy TI-P19001 not Heat Treated Grade 2 Forging Stock, for Solution Treated and Aged Forgings a or D Less Than or Equal to 300 mm-Edition P 2 |
|
AECMA PREN 3455 |
Titanium Alloy TI-P11 Not Heat Treated Reference Heat Treatment: Solution Treated and Aged Grade 2 Forging Stock De Less Than or Equal to 300 mm |
|
AECMA PREN 3456 |
Titanium Alloy TI-P63 Annealed 920 Less Than or Equal to Rm Less Than or Equal to 1180 MPa Sheet and Strip A Less Than or Equal to 6 mm |
|
AECMA PREN 3458 |
Aerospace Series Titanium Alloy TI-P63 Annealed 900 Less Than or Equal to Rm Less Than or Equal to 1160 MPa Bar and Wire for Fasteners Machined De Less Than or Equal to 25 mm-Issue P 2; Inactive for New Design See PREN 3813 |
|
AECMA PREN 3459 |
Aerospace Series Titanium Alloy TI-P68 Solution Treated and Aged Rm Greater Than or Equal to 1030 MPa Plate 6 Less Than a Less Than or Equal to 50 mm Issue P 1 |
|
AECMA PREN 3460 |
Aerospace Series Titanium TI-P02 Annealed 390 Less Than or Equal to Rm Less Than or Equal to 540 MPa Bar for Machining De Less Than or Equal to 150 mm-Issue P 1 |
|
AECMA PREN 3460 |
Aerospace Series Titanium TI-P99002 Annealed Bar for Machining a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 390 MPa-Edition P 2 |
|
AECMA PREN 3461 |
Aerospace Series Titanium TI-P99003 Annealed Bar for Machining D Less Than or Equal to 150 mm 540 MPa Less Than or Equal to Rm Less Than or Equal to 740 MPa-Edition P 2 |
|
AECMA PREN 3461 |
Titanium TI-P04 Annealed 540 Less Than or Equal to Rm Less Than or Equal to 740 MPa Bar for Machining De Less Than or Equal to 150 mm |
|
AECMA PREN 3462 |
Aerospace Series Titanium Alloy TI-P19001 Annealed Bar for Machining D Less Than or Equal to 150 mm-Edition P 2 |
|
AECMA PREN 3463 |
Aerospace Series Titanium Alloy TI-P19001 Solution Heat Treated and Aged Bar for Machining D Less Than or Equal to 75 mm-Edition P 2 |
|
AECMA PREN 3463 |
Titanium Alloy TI-P11 Solution Treated and Aged 650 Less Than or Equal to Rm Less Than or Equal to 880 MPa Bar for Machining De Less Than or Equal to 75 mm |
|
AECMA PREN 3465 |
Aerospace Series Titanium Alloy TI-P63001 not Heat Treated Grade 2 Forging Stock, for Solution Treated and Aged Forgings a or D Less Than or Equal to 360 mm-Edition P 2 |
|
AECMA PREN 3465 |
Titanium Alloy TI-P68 Not Heat Treated Reference Heat Treatment: Solution Treated and Aged Grade 2 Forging Stock De Less Than or Equal to 360 mm |
|
AECMA PREN 3466 |
Titanium Alloy TI-P68 Solution Treated and Aged Rm Greater Than or Equal to 1000 MPa Bar for Machining De Less Than or Equal to 150 mm |
|
AECMA PREN 3467 |
Aerospace Series Titanium Alloy TI-C63 Not Heat Treated Remelting Stock De Less Than or Equal to 300 mm-Issue P 1 |
|
AECMA PREN 3467 |
Aerospace Series Titanium Alloy TI-C64001 not Heat Treated Remelting Stock De Less Than or Equal to 300 mm-Edition P 2 |
|
AECMA PREN 3469 |
Aerospace Series Steel FE-PM1802 (X5CrNiCu15-5) Consumable Electrode Remelted Solution Treated and Precipitation Hardened Forgings a or D Less Than or Equal to 200 mm 1 310 MPa Less Than or Equal to Rm Less Than or Equal to 1 550 MPa-Edition P 2 |
|
AECMA PREN 3469 |
Aerospace Series Steel FE-PM64 Solution Annealed and Precipitation Hardened 1310 Less Than or Equal to Re Less Than or Equal to 1550 MPa Forgings De Less Than or Equal to 200 mm-Issue P 1 |
|
AECMA PREN 3470 |
Aerospace Series Steel FE-PM67 Solution Annealed and Precipitation Hardened 1220 Less Than or Equal to Rm Less Than or Equal to 1400 MPa Forgings De Less Than or Equal to 100 mm-Issue P 1 |
|
AECMA PREN 3474 |
Aerospace Series Aluminium Alloy AL-P2024-T81 Sheet and Strip 0,25 mm Less Than or Equal to a Less Than or equal to 6 mm-Edition P 1 |
|
AECMA PREN 3474 |
Aerospace Series Aluminium Alloy AL-P2024-T81 Sheet and Strip 0,25 mm Less Than or Equal to a Less Than or equal to 6 mm-Issue P1 |
|
AECMA PREN 3474 |
Aerospace Series Aluminium AL-P2024-T81 Sheet and Strip 0,25 mm Less Than or Equal to a Less Than or Equal to 6 mm-Edition P2 |
|
AECMA PREN 3475-100 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 100 - General-Issue P 1 |
|
AECMA PREN 3475-100 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 100: General-Edition P 2 |
|
AECMA PREN 3475-201 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 201 - Visual Examination-Issue P 1 |
|
AECMA PREN 3475-202 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 202 - Mass-Issue P 1 |
|
AECMA PREN 3475-203 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 203 - Dimensions-Edition P 2 |
|
AECMA PREN 3475-203 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 203 - Dimensions-Edition P 3 |
|
AECMA PREN 3475-203 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 203 - Dimensions-Issue P 1 |
|
AECMA PREN 3475-301 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 301 - Electrical Resistance Per Unit Length-Issue P 1 |
|
AECMA PREN 3475-304 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 304 - Surface Resistance-Issue P 1 |
|
AECMA PREN 3475-305 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 305 - Overload Resistance-Issue P 1 |
|
AECMA PREN 3475-307 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 307: Corona Extinction Voltage-Edition P 1 |
|
AECMA PREN 3475-401 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 401 - Accelerated Ageing-Edition P 2 |
|
AECMA PREN 3475-401 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 401 - Accelerated Ageing-Issue P 1 |
|
AECMA PREN 3475-402 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 402 - Shrinkage and Delamination-Issue P 1 |
|
AECMA PREN 3475-403 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 403 - Delamination and Blocking-Issue P 1 |
|
AECMA PREN 3475-404 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 404 - Thermal Shock-Issue P 1 |
|
AECMA PREN 3475-405 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 405 - Bending at Ambient Temperature-Issue P 1 |
|
AECMA PREN 3475-406 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 406 - Cold Bend Test-Issue P 1 |
|
AECMA PREN 3475-407 |
Aerospace Series Cable, Electrical, Aircraft Use Test Methods Part 407 - Flammability-Edition P 3 |
|
AECMA PREN 3475-407 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 407 - Flammability-Issue P 1 |
|
AECMA PREN 3475-408 |
Aerospace Series Cables Electrical Aircraft Use Test Methods Part 408: Fire Resistance-Edition 1E |
|
AECMA PREN 3475-408 |
Aerospace Series Cables Electrical Aircraft Use Test Methods Part 408: Fire Resistance-Edition P 1 |
|
AECMA PREN 3475-409 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 409 - Air-Excluded Ageing-Issue P 1 |
|
AECMA PREN 3475-410 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 410 - Thermal Endurance-Issue P 1 |
|
AECMA PREN 3475-411 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 411: Resistance to Fluids |
|
AECMA PREN 3475-411 |
Aerospace Series Cables, Electrical, Aircraft use Test Methods Part 411: Resistance to Fluids-Edition P 1 |
|
AECMA PREN 3475-412 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 412 : Humidity Resistance-Edition 3 |
|
AECMA PREN 3475-412 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 412: Humidity Resistance-Edition P 1 |
|
AECMA PREN 3475-413 |
Aerospace Series Cables Electrical Aircraft Use Test Methods Part 413 - Wrap Back Test |
|
AECMA PREN 3475-414 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 414: Differential Scanning Calorimeter (DSC Test)-Edition P 1 |
|
AECMA PREN 3475-415 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 415: Rapid Change of Temperature-Edition P 2 |
|
AECMA PREN 3475-416 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 416: Thermal Stability-Edition P 2 |
|
AECMA PREN 3475-418 |
Aerospace series Cables, electrical, aircraft use Test methods Part 418: Thermal endurance for conductors-Edition P 1 |
|
AECMA PREN 3475-501 |
Aerospace Series Cable, Electrical, Aircraft Use Test Methods Part 501: Dynamic Cut-Through-Edition P 2 |
|
AECMA PREN 3475-501 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 501 - Dynamic Cut-Through-Issue P 1 |
|
AECMA PREN 3475-502 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 502 - Notch Propagation-Issue P 1 |
|
AECMA PREN 3475-503 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 503 - Scrape Abrasion-Issue P 1 |
|
AECMA PREN 3475-504 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 504 - Torsion-Issue P 1 |
|
AECMA PREN 3475-505 |
Aerospace series Cables, electrical, aircraft use Test methods Part 505: Tensile test on conductors and strands-Edition P 2 |
|
AECMA PREN 3475-506 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 506 - Plating Continuity-Edition P 2 |
|
AECMA PREN 3475-506 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 506 - Plating Continuity-Issue P 1 |
|
AECMA PREN 3475-507 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 507 - Adherence of Plating-Edition P 2 |
|
AECMA PREN 3475-507 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 507 - Adherence of Plating-Issue P 1 |
|
AECMA PREN 3475-508 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 508: Plating Thickness-Edition P 1 |
|
AECMA PREN 3475-508 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 508: Plating Thickness-Edition P 2 |
|
AECMA PREN 3475-508 |
Aerospace Series Electrical Cables for Aircraft Use Test Methods Part 5.08: Plating Thickness-Issue C |
|
AECMA PREN 3475-509 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 509: Solderability-Edition P 1 |
|
AECMA PREN 3475-510 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 510: Tensile Strength and Elongation of Extruded Insulation, Sheath and Jacket Material-Edition P 1 |
|
AECMA PREN 3475-511 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 511: Cable-to-Cable Abrasion-Edition P 1 |
|
AECMA PREN 3475-511 |
Aerospace Series Electrical Cables for Aircrafts Use Test Methods Part 511: Cable-to-Cable Abrasion |
|
AECMA PREN 3475-513 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 513: Deformation Resistance (Installation with Plastic Cable Ties)-Edition P 1 |
|
AECMA PREN 3475-514 |
Aerospace series Cables, electrical, aircraft use Test methods Part 514: Porosity of copper cladding on aluminium strands-Edition P 1 |
|
AECMA PREN 3475-601 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 601: Smoke Density-Edition P 1 |
|
AECMA PREN 3475-601 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 601: Smoke Density-Edition P 2 |
|
AECMA PREN 3475-602 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 602: Toxicity-Edition P 1 |
|
AECMA PREN 3475-602 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 602: Toxicity-Edition P 2 |
|
AECMA PREN 3475-603 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 603: Resistance to Wet Arc Tracking-Edition P 1 |
|
AECMA PREN 3475-603 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 603: Resistance to Wet Arc Tracking-Edition P 2 |
|
AECMA PREN 3475-603 |
Aerospace series Cables, electrical, aircraft use Test methods Part 603: Resistance to wet arc tracking-Issue P 3 |
|
AECMA PREN 3475-604 |
Aerospace Series Cables Electrical Aircraft Use Test Methods Part 604 - Resistance to Dry Arc Propagation |
|
AECMA PREN 3475-604 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 604: Resistance to Dry Arc Propagation-Edition P 1 |
|
AECMA PREN 3475-605 |
Aerospace Series Cables Electrical Aircraft Use Test Methods Part 605 - Wet Short Circuit Test |
|
AECMA PREN 3475-605 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 605: Wet Short Circuit Test-Edition P 1 |
|
AECMA PREN 3475-702 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 702 - Braid Screen Pushback Capability-Issue P 1 |
|
AECMA PREN 3475-703 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 703 - Permanence of Manufacturer's Marking-Issue P 1 |
|
AECMA PREN 3475-704 |
Aerospace Series Cables Electrical Aircraft Use Test Methods Part 704 - Flexibility |
|
AECMA PREN 3475-705 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 705: Contrast Measurement |
|
AECMA PREN 3475-705 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 705: Contrast Measurement-Edition P 1 |
|
AECMA PREN 3475-705 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 705: Contrast Measurement-Edition P 2 |
|
AECMA PREN 3475-706 |
Aerospace series Cables, electrical, aircraft use Test methods Part 706: Laser markability-Edition P 1 |
|
AECMA PREN 3475-802 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 802: Capacitance Unbalance-Edition P 1 |
|
AECMA PREN 3475-803 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 803: Capacitance Variation-Edition P 1 |
|
AECMA PREN 3475-804 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 804: Velocity of Propagation-Edition P 1 |
|
AECMA PREN 3475-805 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 805: Characteristic Impedance-Edition P 1 |
|
AECMA PREN 3475-806 |
Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 806: Attenuation-Edition P 1 |
|
AECMA PREN 3476 |
Aerospace Series Steel FE-PL1501 (30CRMO12) Air Melted Softened Forging Stock a or D Less Than or Equal to 300 mm-Edition P2 |
|
AECMA PREN 3476 |
Aerospace Series Steel FE-PL48 Softened Reference Heat Treatment: Hardened and Tempered Forging Stock De Less Than or Equal to 150 mm-Issue P 1 |
|
AECMA PREN 3476-002 |
Aerospace Series Connectors, Electrical, Circular, Bayonet Coupling, Operating Temperature 175 Degrees C or 200 Degrees C Continuous Part 002: Specification of Performance and Contact Arrangements-Edition P 1 |
|
AECMA PREN 3476-003 |
Aerospace Series Connectors, Electrical, Circular, Bayonet Coupling, Operating Temperature 175 Degrees C or 200 Degrees C Continuous Part 003: Receptacle, Square Flange Mounting Product Standard-Edition P 1 |
|
AECMA PREN 3476-004 |
Aerospace Series Connectors, Electrical, Circular, Bayonet Coupling, Operating Temperature 175 Degrees C or 200 Degrees C Continuous Part 004: Receptacle, Jam-Nut Mounting Product Standard-Edition P 1 |
|
AECMA PREN 3476-005 |
Aerospace Series Connectors, Electrical, Circular, Bayonet Coupling, Operating Temperature 175 Degrees C or 200 Degrees C Continuous Part 005: Receptacle, Hermetic, Square Flange Mounting Product Standard-Edition P 1 |
|
AECMA PREN 3476-006 |
Aerospace Series Connectors, Electrical, Circular, Bayonet Coupling, Operating Temperature 175 Degrees C or 200 Degrees C Continuous Part 006: Receptacle, Hermetic, Jam-Nut Mounting Product Standard-Edition P 1 |
|
AECMA PREN 3476-007 |
Aerospace Series Connectors, Electrical, Circular, Bayonet Coupling, Operating Temperature 175 Degrees C or 200 Degrees C Continuous Part 007: Receptacle, Hermetic, Round Flange, Welding or Brazing Mounting Product Standard-Edition P 1 |
|
AECMA PREN 3476-008 |
Aerospace Series Connectors, Electrical, Circular, Bayonet Coupling, Operating Temperature 175 Degrees C or 200 Degrees C Continuous Part 008: Plug Product Standard-Edition P 1 |
|
AECMA PREN 3476-010 |
Aerospace Series Connectors, Electrical, Circular, Bayonet Coupling, Operating Temperature 175 Degrees C or 200 Degrees C Continuous Part 010: Protective Cover for Plug Product Standard-Edition P 1 |
|
AECMA PREN 3477 |
Aerospace Series Steel FE-PM3503 (X7CrNiMo15-7-3) Air Melted Solution Treated and Precipitation Hardened Plate 6 mm Less Than a Less Than or Equal to 15 mm 1 310 MPa Less Than or Equal to Rm Less Than or Equal to 1 550 MPa-Edition P2 |
|
AECMA PREN 3477 |
Aerospace Series Steel FE-PM63 Solution Annealed Transformation Treated and Precipitation Hardened 1310 Less Than or Equal to Rm Less Than or Equal to 1550 MPa Plate 6 Less Than a Less Than or Equal to 15 mm-Issue P 1 |
|
AECMA PREN 3479 |
Aerospace Series Steel FE-PM1802 (X5CrNiCu15-5) Consumable Electrode Remelted Solution Treated and Precipitation Hardened Plate 6 mm Less Than or Equal to a Less Than or Equal to 15 mm 1 070 MPa Less Than or Equal to Rm Less Than or Equal to 1 310 MPa-Edition P 2 |
|
AECMA PREN 3479 |
Aerospace Series Steel FE-PM64 Solution Annealed and Precipitation Hardened Rm Greater Than or Equal to 1070 MPa Plate 6 Less Than a Less Than or Equal to 15 mm-Issue P 1 |
|
AECMA PREN 3480 |
Aerospace Series Steel FE-PA13 Softened 500 Less Than or Equal to Rm Less Than or Equal to 750 MPa Plate 6 Less Than a Less Than or Equal to 20 mm-Issue P 1 |
|
AECMA PREN 3480 |
Aerospace series Steel FE-PA3601 (X6CrNiTi18-10) Air melted Softened Plate 6 mm Less than or Equal to a Less than or Equal to 50 mm 500 MPa Less than or Equal to Rm Less than or Equal to 700 MPa-Issue P 2 |
|
AECMA PREN 3481 |
Aerospace Series Steel FE-PA13 Annealed Reference Heat Treatment: Softened Hollow Bars 5 Less Than or Equal to a Less Than or Equal to 12 mm-Issue P 1 |
|
AECMA PREN 3482 |
Aerospace Series Steel FE-PA13 Annealed Reference Heat Treatment: Softened Forging Stock De Less Than or Equal to 100 mm-Issue P 1 |
|
AECMA PREN 3483 |
Aerospace Series Steel FE-CM61 Homogenised, Solution Treated, Precipitation Hardened and Sub Zero Rm Greater Than or Equal to 1240 MPa High Strength Sand or Investment Casting-Issue P 1 |
|
AECMA PREN 3484 |
Aerospace Series Steel FE-CM3801 (X5CrNiCu16-4) as Cast Homogenized, Solution Treated and Precipitation Hardened Remelting Stock-Edition P2 |
|
AECMA PREN 3484 |
Aerospace Series Steel FE-CM61 as Cast Reference Heat Treatment: Homogenised, Solution Treated, Precipitation Hardened and Sub Zero Remelting Stock-Issue P 1 |
|
AECMA PREN 3485 |
Aerospace Series Steel FE-CM61 Homogenised, Solution Treated, Precipitation Hardened and Sub Zero Rm Greater Than or Equal to 830 MPa Medium Strength Sand or Investment Casting |
|
AECMA PREN 3491 |
Aerospace Series Steel FE-PM42 Hardened and Tempered 900 Less Than or Equal to Rm Less Than or Equal to 1100 MPa Forgings De Less Than or Equal to 100 mm-Issue P 1 |
|
AECMA PREN 3494 |
Aerospace Series Titanium Alloy TI-P19001 Grade 2 Solution Treated and Aged Forgings De Less Than or Equal to 75 mm-Edition P 2 |
|
AECMA PREN 3494 |
Titanium Alloy TI-P11 Solution Treated and Aged 650 Less Than or Equal to Rm Less Than or Equal to 880 MPa Forgings De Less Than or Equal to 75 mm |
|
AECMA PREN 3495 |
Aerospace Series Titanium Alloy TI-P19001 Grade 2 Annealed Forgings De Less Than or Equal to 150 mm-Edition P 2 |
|
AECMA PREN 3495 |
Titanium alloy TI-P11 Annealed 540 Less Than or Equal to Rm Less Than or Equal to 770 MPa Forgings De Less Than or Equal to 150 mm |
|
AECMA PREN 3496 |
Aerospace Series Titanium TI-P99003 Grade 2 Annealed Forgings De Less Than or Equal to 150 mm-Edition P 2 |
|
AECMA PREN 3496 |
Titanium TI-P04 Annealed 540 Less Than or Equal to Rm Less Than or Equal to 740 MPa Forgings De Less Than or Equal to 150 mm |
|
AECMA PREN 3497 |
Titanium TI-P01 Annealed 290 Less Than or Equal to Rm Less Than or Equal to 420 MPa sheet and Strip, Cold Rolled A Less Than or Equal to 6 mm |
|
AECMA PREN 3498 |
Titanium TI-P02 Annealed 390 Less Than or Equal to Rm Less Than or Equal to 540 MPa Sheet and Strip, Cold Rolled A Less Than or Equal to 3 mm |
|
AECMA PREN 3499 |
Titanium TI-P04 Annealed 570 Less Than or Equal to Rm Less Than or Equal to 730 MPa Sheet and Strip, Cold Rolled A Less Than or Equal to 3 mm |
|
AECMA PREN 3501 |
Aerospace Series Titanium Alloy TI-P11 Solution Treated and Aged 690 Less Than or Equal to Rm or Less Than or Equal to 920 MPa Sheet and Strip a Less Than or Equal to 6 mm-Edition P 2; Inactive for New Design see PREN 3870 and PREN 3871 |
|
AECMA PREN 3504 |
Aerospace Series Titanium and Titanium Alloys Circular Tubes for Fluids Close Tolerances Diameter 3,2 mm Less Than or Equal to D Less Than or Equal to 50 mm Thickness 0,25 mm Less Than or Equal to a Less Than or Equal to 2mm Dimensions-Edition P 1 |
|
AECMA PREN 3507 |
Aerospace Series Steel FE-PL1501 (30CrMo12) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 100 mm 930 MPa Less Than or Equal to Rm Less Than or Equal to 1 080 MPa-Edition P2 |
|
AECMA PREN 3507 |
Aerospace Series Steel FE-PL48 Hardened and Tempered 950 Less Than or Equal to Rm Less Than or Equal to 1100 MPa Forgings De Less Than or Equal to 100 mm-Issue P 1 |
|
AECMA PREN 3508 |
Aerospace Series Steel FE-PL1501 (30CrMo12) Air Melted Hardened and Tempered Bar De Less Than or Equal to 100 mm 930 MPa Less Than or Equal to Rm Less Than or Equal to 1 080 MPa-Edition P2 |
|
AECMA PREN 3508 |
Aerospace Series Steel FE-PL48 Hardened and Tempered 950 Less Than or Equal to Rm Less Than or Equal to 1100 MPa Bar for Machining De Less Than or Equal to 100 mm-Issue P 1 |
|
AECMA PREN 3509 |
Aerospace Series Steel FE-PL1501 (30CrMo12) Air Melted Hardened and Tempered Bar De Less Than or Equal to 40 mm 1 050 MPa Less Than or Equal to Rm Less Than or Equal to 1 250 MPa-Edition P2 |
|
AECMA PREN 3509 |
Aerospace Series Steel FE-PL48 Hardened and Tempered 1050 Less Than or Equal to Rm Less Than or Equal to 1250 MPa Bar for Machining De Less Than or Equal to 40 mm-Issue P 1 |
|
AECMA PREN 3510 |
Aerospace Series Heat Resisting Alloy FE-PA2602 (X4NiCrTiMoV26-15) Solution and Precipitation Treated Bar and Section a or D Less Than or Equal to 100 mm-Edition P2 |
|
AECMA PREN 3510 |
Aerospace Series Heat Resisting Steel FE-PA93-HT Solution Treated and Precipitation Treated Rm Greater Than or Equal to 850 MPa Bar for Machining De Less Than or Equal to 100 mm-Issue P 1 |
|
AECMA PREN 3511 |
Aerospace Series Steel FE-PL1801 (100Cr6) Vacuum Induction Melted and Consumable Electrode Remelted Annealed Bar for the Manufacture of Machined Bearings a or D Less Than or Equal to 130 mm-Edition P2 |
|
AECMA PREN 3511 |
Aerospace Series Steel FE-PL1801 (100Cr6) Vacuum Induction Melted and Consumable Electrode Remelted Softened Bar for the Manufacture of Machined Bearings a or D Less Than or Equal to 130 mm-Edition P 2 |
|
AECMA PREN 3511 |
Aerospace Series Steel FE-PL32 Hardened and Tempered Bar for Bearing D Less Than or Equal to 25 mm-Issue P 1 |
|
AECMA PREN 3512 |
Aerospace Series Steel FE-PL1801 (100Cr6) Vacuum Induction Melted and Consumable Electrode Remelted Hardened and Tempered Hollow Bars for Bearing 3,5 mm Less Than or Equal to a Less Than or Equal to 55 mm-Issue P 2 |
|
AECMA PREN 3512 |
Aerospace Series Steel FE-PL1801 (100Cr6) Vacuum Induction Melted and Consumable Electrode Remelted Hardened and Tempered Hollow Bars for the Manufacture of Bearings 3,5 mm Less Than or Equal to a Less Than or Equal to 55 mm-Edition P 2 |
|
AECMA PREN 3512 |
Aerospace Series Steel FE-PL32 Hardened and Tempered Hollow Bars for Bearing 3,5 Less Than or Equal to a Less Than or Equal to 55 mm-Issue P 1 |
|
AECMA PREN 3513 |
Aerospace Series Steel FE-PL711 Hardened and Tempered 900 Less Than or Equal to Rm Less Than or Equal to 1100 MPa Bar and Wire De Less Than or Equal to 45 mm-Issue P 1 |
|
AECMA PREN 3514 |
Aerospace Series Steel FE-PL711 Hardened and Tempered 1100 Less Than or Equal to Rm Less Than or Equal to 1300 MPa Bar and Wire for Bolts De Less Than or Equal to 25 mm-Issue P 1 |
|
AECMA PREN 3515 |
Aerospace Series Steel FE-PL711 Hardened and Tempered 1100 Less Than or Equal to Rm Less Than or Equal to 1300 MPa Forgings De Less Than or Equal to 25 mm-Issue P 1 |
|
AECMA PREN 3515 |
Aerospace Series Steel FE-PL8201 (41NiCrMo2) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 25 mm 1 100 MPa Less Than or Equal to Rm Less Than or Equal to 1 300 MPa-Edition P2 |
|
AECMA PREN 3516 |
Aerospace Series Steel Fe-PL711 Softened Reference Heat Treatment: Hardened and Tempered Forging Stock De Less Than or Equal to 35 mm-Issue P 1 |
|
AECMA PREN 3516 |
Aerospace Series Steel FE-PL8201 (41NiCrMo2) Air Melted Softened Forging Stock a or D Less Than or Equal to 300 mm-Edition P2 |
|
AECMA PREN 3518 |
Aerospace Series Steel FE-PL2105 Air Melted Hardened and Tempered Forgings De Less Than or Equal to 150 mm 1080 MPa Less Than or Equal to Rm Less Than or Equal to 1280 MPa-Edition P 2 |
|
AECMA PREN 3518 |
Steel FE-PL73 Hardened and Tempered 1080 Less Than or Equal to Rm Less Than or Equal to 1280 MPa Forgings De Less Than or Equal to 150 mm |
|
AECMA PREN 3520 |
Aerospace Series Steel FE-PL2105 Air Melted Softened Forging Stock a or D Less Than or Equal to 300 mm-Edition P 2 |
|
AECMA PREN 3520 |
Steel FE-PL73 Softened Reference Heat Treatment: Hardened and Tempered Forging Stock De Less Than or Equal to 200 mm |
|
AECMA PREN 3521 |
Aerospace Series Steel FE-PL2106 (30CrNiMo8) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 150 mm 900 MPa Less Than or Equal to Rm Less Than or Equal to 1 100 MPa-Edition P2 |
|
AECMA PREN 3521 |
Aerospace Series Steel FE-PL74 Hardened and Tempered 900 Less Than or Equal to Rm Less Than or Equal to 1100 MPa Bar for Machining De Less Than or Equal to 150 mm-Issue P 1 |
|
AECMA PREN 3523 |
Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 100 mm 1080 MPa Less Than or Equal to Rm Less Than or Equal to 1250 MPa-Edition P2 |
|
AECMA PREN 3523 |
Aerospace Series Steel FE-PL52 S Hardened and Tempered 1080 Less Than or Equal to Rm Less Than or Equal to 1250 MPa Bar for Machining De Less Than or Equal to 100 mm-Issue P 1 |
|
AECMA PREN 3524 |
Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Sheet a Less Than or Equal 2 mm 1 050 MPa Less Than or Equal to Rm Less Than or Equal to 1 250 MPa-Edition P 2 |
|
AECMA PREN 3524 |
Aerospace Series Steel FE-PL52 S Hardened and Tempered 1050 Less Than or Equal to Rm Less Than or Equal to 1250 MPa Sheet a Less Than or Equal to 2 mm-Issue P 1 |
|
AECMA PREN 3525 |
Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Sheet and Plate 2 mm Less Than or Equal to a Less Than or Equal to 20 mm 1 080 MPa Less Than Rm Less Than or Equal to 1 250 MPa-Edition P 2 |
|
AECMA PREN 3525 |
Aerospace Series Steel FE-PL52 S Hardened and Tempered 1080 Less Than or Equal to Rm Less Than or Equal to 1250 MPa Sheet and Plate 2 Less Than a Less Than or Equal to 20 mm-Issue P 1 |
|
AECMA PREN 3526 |
Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Sheet 0,5 mm Less Than or Equal to a Less Than or Equal to 6 mm 980 MPa Less Than or Equal to Rm Less Than or Equal to 1 180 MPa-Edition P2 |
|
AECMA PREN 3526 |
Aerospace Series Steel FE-PL52 S Hardened and Tempered 980 Less Than or Equal to Rm Less Than or Equal to 1180 MPa Sheet 0,5 Less Than or Equal to a Less Than or Equal to 6 mm-Issue P 1 |
|
AECMA PREN 3527 |
Aerospace Series Steel FE-PL1504 (33CrMoV12) Air Melted Softened Forging Stock a or D Less Than or Equal to 300 mm-Edition P2 |
|
AECMA PREN 3527 |
Aerospace Series Steel FE-PL51 Annealed Reference Heat Treatment: Hardened and Tempered Forging Stock De Less Than or Equal to 100 mm-Issue P 1 |
|
AECMA PREN 3529 |
Aerospace Series Steel FE-PM2701 (X2NiCoMo18-8-5) Vacuum Induction Melted and Vacuum Arc Remelted Solution Treated and Precipitation Hardened Forgings a or D Less Than or Equal to 150 mm 1 750 MPa Less Than or Equal to Rm Less Than or Equal to 2 000 MPa-Edition P 2 |
|
AECMA PREN 3530 |
Aerospace Series Steel FE-PA95 Softened Reference Heat Treatment: Solution Treated and Precipitation Treated Forging Stock De Less Than or Equal to 200 mm-Issue P 1 |
|
AECMA PREN 3531 |
Aerospace Series Steel FE-PA95 Solution Treated and Precipitation Treated 1750 Less Than or Equal to Rm Less Than or Equal to 2000 MPa Sheet a Less Than or Equal to 6 mm-Issue P 1 |
|
AECMA PREN 3532 |
Aerospace Series Steel FE-PA95 Solution Treated and Precipitation Treated 1750 Less Than or Equal to Rm Less Than or Equal to 2000 MPa Plate 6 Less Than a Less Than or Equal to 40 mm-Issue P 1 |
|
AECMA PREN 3532 |
Aerospace Series Steel FE-PM2701 (X2NiCoMo18-8-5) Vacuum Induction Melted and Vacuum Arc Remelted Solution Treated and Precipitation Hardened Plate 6 mm Less Than a Less Than or Equal to 40 mm 1750 MPa Less Than or Equal to Rm Less Than or Equal to 2000 MPa-Edition P2 |
|
AECMA PREN 3536 |
Aerospace Series Nuts, Hexagon, Self-Locking, in Heat Resisting Steel, MoS2 Lubricated Classification: 1 100 MPa (at Ambient Temperature) / 315 Degrees Celsius-Edition P 2 |
|
AECMA PREN 3537 |
Aerospace Series Nuts, Anchor, Self-Locking, Fixed, Two Lug, with Counterbore, in Heat Resisting Steel, MoS2 Lubricated Classification: 1100 MPa (at Ambient Temperature)/315 Degrees Celsius-Edition 1 |
|
AECMA PREN 3538 |
Aerospace Series Nuts, Anchor, Self-Locking, Fixed, Two Lug, Reduced Series, with Counterbore , in Heat Resisting Steel, MoS2 Lubricated Classification : 1 100 MPa (at Ambient Temperature) / 315 Degrees Celsius-Edition P 1; Corrigendum 5/10/1993 |
|
AECMA PREN 3539 |
Aerospace Series Nuts, Anchor, Self-Locking, One Lug, Fixed, with Counterbore, in Heat Resisting Steel, MoS2 Lubricated Classification : 1 100 MPa (at Ambient Temperature) / 315 Degrees Celsius-Edition P 1 |
|
AECMA PREN 3541 |
Aerospace Series Rod Ends, Adjustable, Self-Aligning Ball Bearing with Threaded Shank Dimensions, Torques, Clearances and Loads-Edition 1 |
|
AECMA PREN 3543 |
Aerospace Series Bolts, 100 Degree Countersunk Normal Head, Offset Cruciform-Ribbed Recess, Close Tolerance Shank, Short Thread in Heat and Corrosion Resisting Steel, Passivated Classification: 1100 MPa (at Ambient Temperature) /425 Degrees Celsius-Issue P 2 |
|
AECMA PREN 3543 |
Bolts, 100 Degrees Countersunk Normal Head, Offset Cruciform-Ribbed Recess, Close Tolerance Shank, Short Thread, in Corrosion Resisting Steel, Passivated Classification: 1100 MPa/425 Degrees Celsius |
|
AECMA PREN 3544-1 |
(CANCELLED) Aerospace Series Titanium and Titanium Alloys Wrought Products Technical Specification Part 1: General Requirements-Edition P 2; Replaced by relevant part of PREN 4800 |
|
AECMA PREN 3544-4 |
(CANCELLED) Aerospace Series Titanium and Titanium Alloys Wrought Products Technical Specification Part 4: Tube-Edition P 2; Replaced by PREN 4800-3 |
|
AECMA PREN 3544-5 |
(CANCELLED) Aerospace Series Titanium and Titanium Alloys Wrought Products Technical Specification Part 5: Wire-Edition P 2; Replaced by PREN 4800-4 |
|
AECMA PREN 3545-001 |
Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C Part 001: Technical specification-Edition P 4 |
|
AECMA PREN 3545-001 |
Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification-Edition P 1; Corrigendum 04/30/1995 |
|
AECMA PREN 3545-001 |
Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification-Edition P 2 |
|
AECMA PREN 3545-001 |
Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 001 : Technical Specification-Edition P 3 |
|
AECMA PREN 3545-002 |
Aerospace series Connectors, electrical rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of performance and contact arrangements-Edition P 4 |
|
AECMA PREN 3545-002 |
Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C Part 002: Specification of performance and contact arrangements-Edition P 5 |
|
AECMA PREN 3545-002 |
Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of Performance and Contact Arrangements-Edition P 2 |
|
AECMA PREN 3545-002 |
Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Devices, Operating Temperatures - 55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of Performance and Contact Arrangements-Edition P 1 |
|
AECMA PREN 3545-002 |
Aerospace Series Rectangular Electrical Connectors Sealed or Unsealed at the Back, with Plastic Casing, Locking Type, for Operating Temperatures -55 Degrees Celsius to +175 Degrees Celsius Performance Specification and Configurations-Edition 2 |
|
AECMA PREN 3545-002 |
Aerospace Series Rectangular Electrical Connectors Sealed or Unsealed at the Back, with Plastic Casing, Locking Type, for Operating Temperatures -55 Degrees Celsius to +175 Degrees Celsius Performance Specification and Configurations-Edition P 3 |
|
AECMA PREN 3545-003 |
Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with Female Contacts Product Standard-Edition P 1 |
|
AECMA PREN 3545-003 |
Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 Degrees C to 175 Degrees C Part 003 : Connectors with female contacts Product standard-Edition P 3 |
|
AECMA PREN 3545-004 |
Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts - Product Standard-Edition P 3 |
|
AECMA PREN 3545-004 |
Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts Product Standard-Edition P 1 |
|
AECMA PREN 3545-004 |
Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts Product Standard-Edition P 2 |
|
AECMA PREN 3545-005 |
Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 005 : Female Coding and Attachment System for Mounting on Free Housing (Plug) Product Standard-Edition P 1 |
|
AECMA PREN 3545-006 |
Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 006: Male Coding and Attachment System for Mounting on Fixed Housing (Receptacle) Product Standard-Edition P 1 |
|
AECMA PREN 3545-007 |
Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard-Edition P 1 |
|
AECMA PREN 3545-007 |
Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard-Edition P 2 |
|
AECMA PREN 3545-007 |
Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 007 : Cable Clamp Product Standard-Edition P 3 |
|
AECMA PREN 3545-008 |
Aerospace Series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 degrees C to 175 degrees C Part 008: Tools for assembly/removal of coding and attachment system Product standard-Edition P 1 |
|
AECMA PREN 3550 |
Aerospace Series Aluminium Alloy (2024) Solution Treated, Stretched and Artificially Aged (T8511) Extruded Bars and Sections (a or D) Less Than or Equal to 150 mm-Issue P 1 |
|
AECMA PREN 3551 |
Aerospace Series Aluminium Alloy (7150) Solution Treated, Straightened and Artificially Aged (T6511) Extruded Bars and Sections (a or D) Less Than or Equal to 90 mm-Issue P 1 |
|
AECMA PREN 3552 |
Aerospace Series Aluminium Alloy (2618A) Solution Treated, Straightened and Artificially Aged (T6) Clad Sheet and Strip 0,4 Less Than or Equal to a Less Than or Equal to 6 mm-Issue P 1 |
|
AECMA PREN 3553 |
Aerospace Series Aluminium Alloy (2618A) Solution Treated, Stretched and Artificially Aged (T6511) Extruded Bars and Sections 1,2 Less Than or Equal to (a or D) Less Than or Equal to 100 mm-Issue P 1 |
|
AECMA PREN 3554 |
Aerospace Series Aluminium Alloy (7010) Solution Treated, Cold Compressed and Artificially Aged (T7652) Hand Forgings a Less Than or Equal to 200 mm-Issue P 1 |
|
AECMA PREN 3555 |
Aerospace Series Aluminium Alloy (7075) Solution Treated, Controlled Stretched and Artificially Aged (T79510) Extruded Bars and Sections 1,2 Less Than (a or D) Less Than or Equal to 100 mm with Peripheral Coarse Grain Control-Issue P 1 |
|
AECMA PREN 3561 |
Aerospace Series Pipe Coupling 8 Degree 30' in Titanium Alloy Ferrules with Dynamic Beam Seal End, Welded and Reduced at Pipe End-Edition P 1 |
|
AECMA PREN 3562 |
Aerospace Series Pipe Couplings, 37 Degree, Spherical, in Heat Resisting Steel Elbows 90 Degree, Welded Inch Series |
|
AECMA PREN 3563 |
Aerospace Series Pipe Coupling in Titanium Alloy Elbow 45 Degree Double Welded-Edition 1 |
|
AECMA PREN 3563 |
Aerospace Series Pipe Couplings, 37 Degree, Spherical, in Heat Resisting Steel Reductors, Welded Inch Series |
|
AECMA PREN 3564 |
Aerospace Series Pipe Couplings, 37 Degree, Spherical, in Heat Resisting Steel Tees, Welded Inch Series |
|
AECMA PREN 3565 |
Aerospace Series Pipe Coupling 8 Degree 30 Feet in Titanium Alloy Cross-Edition 1 |
|
AECMA PREN 3565-1 |
Aerospace Series Pipe Couplings, 37 Degree, Spherical, in Heat Resisting Steel Geometical Configuration Male Sealing Ends Inch Series |
|
AECMA PREN 3565-3 |
Aerospace Series Pipe Couplings, 37 Degree, Spherical, in Heat Resisting Steel Geometrical Configuration Weld Ends Inch Series |
|
AECMA PREN 3565-4 |
Aerospace Series Pipe Couplings, 37 Degree, Spherical, in Heat Resisting Steel Geometrical Configuration Port Connections Inch Series |
|
AECMA PREN 3565-5 |
Aerospace Series Pipe Couplings, 37 Degrees, Spherical, in Heat Resisting Steel Geometrical Configuration Female Sealing Ends Inch Series |
|
AECMA PREN 3566 |
Aerospace Series Pipe Coupling 8 Degree 30' in Titanium Alloy Adapters with Locking Ring-Edition P 1 |
|
AECMA PREN 3567-001 |
Aerospace Series Couplers for Use in Multiplex Data Bus Systems in Accordance with STANAG 3838 Part 001 - Technical Specification-Edition P 1 |
|
AECMA PREN 3567-003 |
Aerospace Series Couplers for Use in Multiplex Data Bus Systems in Accordance with STANAG 3838 Part 003 - Single In-Line Couplers Product Standard-Edition P 1 |
|
AECMA PREN 3567-004 |
Aerospace Series Couplers for Use in Multiplex Data Bus Systems in Accordance with STANAG 3838 Part 004 - Double In-Line Couplers Product Standard-Edition P 1 |
|
AECMA PREN 3571 |
Aerospace Series PTFE Flexible Hose Assembly with Convoluted Inner Tube of a Nominal Pressure up to 6800 kPa and 8 Degree 30 Feet Fitting in Corrosion-Resistant Steel Product Standard |
|
AECMA PREN 3572 |
Aerospace Series PTFE Flexible Hose Assembly with Convaluted Inner Tube of a Nominal Pressure up to 6800 kPa and 8 Degree 30' Fitting in Titanium Product Standard-Issue P 1 |
|
AECMA PREN 3572 |
Aerospace Series PTFE Flexible Hose Assembly with Convoluted Inner Tube and 8 Degree 30' Fitting in Titanium Product Standard-Edition 1 |
|
AECMA PREN 3573 |
Aerospace Series PTFE Flexible Hose Assembly with Convoluted Inner Tube of a Nominal Pressure up to 6800 kPa and 24 Degree Fitting in Corrosion-Resistant Steel Product Standard |
|
AECMA PREN 3574 |
Aerospace Series PTFE Flexible Hose Assembly with Convoluted Inner Tube of a Nominal Pressure up to 6800 kPa and 24 Degree Fitting in Titanium Product Standard |
|
AECMA PREN 3575 |
Aerospace Series PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 10500 kPa and 8 Degree 30 Feet Fitting in Corrosion-Resistant Steel Product Standard |
|
AECMA PREN 3577 |
Aerospace Series PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 10500 kPa with 24 Degree Fitting in Corrosion Resistant Steel Product Standard |
|
AECMA PREN 3578 |
Aerospace Series PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 10500 kPa with 24 Degree Fitting in Titanium Product Standard |
|
AECMA PREN 3579 |
Aerospace Series Standard-Weight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 21000 kPa with 8 Degree 30 Feet Fitting in Corrosion-Resistant Steel Product Standard |
|
AECMA PREN 3580 |
Aerospace Series Standard-Weight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 21000 kPa with 8 Degree 30' Fitting in Titanium Product Standard-Issue P 1 |
|
AECMA PREN 3581 |
Aerospace Series Standard-Weight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 21000 kPa with 24 Degree Fitting in Corrosion Resistant Steel Product Standard |
|
AECMA PREN 3582 |
Aerospace Series Standard-Weight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 21000 kPa with 24 Degree Fitting in Titanium Product Standard |
|
AECMA PREN 3583 |
Aerospace Series Lightweight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 21000 kPa with 8 Degree 30 Feet Fitting in Corrosion Resistant Steel Product Standard |
|
AECMA PREN 3584 |
Aerospace Series Lightweight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 21000 kPa with 8 Degree 30' Fitting in Titanium Product Standard-Issue P 1 |
|
AECMA PREN 3585 |
Aerospace Series Lightweight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 21000 kPa with 24 Degree Fitting in Corrosion-Resistant Steel Product Standard |
|
AECMA PREN 3586 |
Aerospace Series Lightweight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 21000 kPa with 24 Degree Fitting in Titanium Product Standard |
|
AECMA PREN 3587 |
Aerospace Series PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 28000 kPa with 8 Degree 30 Feet Fitting in Corrosion-Resistant Steel Product Standard |
|
AECMA PREN 3588 |
Aerospace Series Lightweight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 28000 kPa with 8 Degree 30' Fitting in Titanium Product Standard-Issue P 1 |
|
AECMA PREN 3589 |
Aerospace Series PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 28000 kPa with 24 Degree Fitting in Corrosion-Resistant Steel Product Standard |
|
AECMA PREN 3590 |
Aerospace Series PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 28000 kPa with 24 Degree Fitting in Titantium Product Standard |
|
AECMA PREN 3611 |
Aerospace Series Spigots Dimensions and Fit Selection-Issue P 1 |
|
AECMA PREN 3613 |
Aerospace Series Bolts, Normal Hexagon Head, Relieved Shank, Long Thread, in Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718), Silver Plated Classification : 1275 MPa/ 650 Degrees Celsius-Issue P 1 |