|
AECMA PREN 4303 |
Aerospace Series Sleeves, Tubular, for Tension Screws with Flush Head, in Corrosion Resisting Steel, Passivated, (0,25 mm Wall Thickness)-Edition P 1 |
|
AECMA PREN 4304 |
Aerospace Series Sleeves, Tubular, for Shear Screws and Bolts with Flush Head, in Corrosion Resisting Steel, Passivated (0,25 mm Wall Thickness)-Edition P1 |
|
AECMA PREN 4304 |
Aerospace Series Sleeves, Tubular, for Shear Screws with Flush Head, in Corrosion Resisting Steel, Passivated, (0,25 mm Wall Thickness)-Edition P 1 |
|
AECMA PREN 4306 |
Aerospace Series Sleeves, Tubular, for Tension Screws and Bolts with Flush Head, in Corrosion Resisting Steel, Passivated (0,50 mm Wall Thickness)-Edition P1 |
|
AECMA PREN 4306 |
Aerospace Series Sleeves, Tubular, for Tension Screws with Flush Head, in Corrosion Resisting Steel, Passivated, (0,50 mm Wall Thickness)-Edition P 1 |
|
AECMA PREN 4307 |
Aerospace Series Sleeves, Tubular, for Shear Screws and Bolts with Flush Head, in Corrosion Resisting Steel, Passivated (0,50 mm Wall Thickness)-Edition P1 |
|
AECMA PREN 4307 |
Aerospace Series Sleeves, Tubular, for Shear Screws with Flush Head, in Corrosion Resisting Steel, Passivated, (0,50 mm Wall Thickness)-Edition P 1 |
|
AECMA PREN 4309 |
Aerospace Series Nuts, Hexagon, Self-Locking by Plastic Ring, Normal Height, Normal Across Flats, in Alloy Steel, Cadmium Plated Classification : 900 MPa (at Ambient Temperature) / 120 Degrees Celsius-Edition P 1 |
|
AECMA PREN 4311 |
Aerospace Series Studs, Close Tolerance Shank, Medium Length Thread, in Heat and Corrosion Resisting Steel, MoS2 Lubricated Classification : 1100 MPa (at Ambient Temperature) / 425 Degrees Celsius-Edition P1 |
|
AECMA PREN 4312 |
Aerospace Series Studs, Coarse Tolerance Reduced Shank, Medium Length Thread, in Heat and Corrosion Resisting Steel, with Aluminium Pigmented Coating Classification: 1 100 MPa (at Ambient Temperature)/315 Degrees C-Edition P 1 |
|
AECMA PREN 4313 |
Aerospace Series Aluminium Alloy AL-P6013-T6 Sheet and Strip 0,5 mm Less Than or Equal to a Less Than or Equal to 6 mm-Edition P 1 |
|
AECMA PREN 4313 |
Aerospace Series Aluminium Alloy AL-P6013-T6 Sheet and Strip 0,5 mm Less Than or Equal to a Less Than or Equal to 6 mm-Edition P 2 |
|
AECMA PREN 4314 |
Aerospace Series Heat Resisting Alloy FE-PA2602 (X4NiCrTiMoV26-15) Non Heat Treated Forging Stock a or D Less Than or Equal to 250 mm-Edition P 1 |
|
AECMA PREN 4319 |
Aerospace Series Drives, Internal, Offset Cruciform, Ribbed Metric Series-Edition P1 |
|
AECMA PREN 4320 |
Aerospace Series Drives, Internal, Offset Cruciform, Metric Series-Edition P1 |
|
AECMA PREN 4321 |
Aerospace Series Bolts, Double Hexagon Head with Lockwire Holes, Relieved Shank, Long Thread, in Heat Resisting Nickel Base Alloy NI-PH2601 (Inconel 718), Silver Plated Classification: 1 550 MPa (at Ambient Temperature) / 650 Degrees C-Edition P 1 |
|
AECMA PREN 4322 |
Aerospace Series Bolts, Double Haxagon Head with Lockwire Holes, Relieved Shank, Long Thread, in Titanium Alloy TI-P63, Anodized, MoS2 Coated Strength Class: 1 100 MPa (at Ambient Temperature)-Edition P1 |
|
AECMA PREN 4325 |
Aerospace Series Heat Resisting Alloy NI-WH1302 (NiCr20Co13Mo4Ti3AI) Filler Metal for Welding Wire and Rod-Edition P 2; Supersedes Edition P 1: March 1997; Replaced by EN 4325 |
|
AECMA PREN 4326 |
Aerospace Series Heat Resisting Alloy CO-WH4102 (CoCr28W20Ni5V1) Filler Metal for Welding Wire And Rod-Edition P 2; Supersedes Edition P 1: March 1997; Replaced by EN 4326 |
|
AECMA PREN 4327 |
Aerospace Series Heat Resisting Alloy CO-WH1401 (CoCr26Ni11W8) Filler Metal for Welding Wire and Rod-Edition P 2; Supersedes Edition P 1: March 1997; Replaced by EN 4327 |
|
AECMA PREN 4328 |
Aerospace Series Steel FE-WM1601 (X18CrWNi13-3-2) Filler Metal for Welding Wire and Rod-Edition P 1 |
|
AECMA PREN 4329 |
Aerospace Series Heat Resisting Alloy NI-WH0001 (NiCr20) Filler Metal for Welding Wire and Rod-Edition P 2; Supersedes Edition P 1: March 1997; Replaced by EN 4329 |
|
AECMA PREN 4331 |
Aerospace Series Steel FE-WL1804 (25CrMnMo4-2-2) Filler Metal for Welding Wire and Rod-Edition P 1 |
|
AECMA PREN 4332 |
Aerospace Series Steel FE-WL1805 (8CrMnMo12-4-9) Filler Metal for Welding Wire and Rod-Edition P 1 |
|
AECMA PREN 4333 |
Aerospace Series Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) Filler Metal for Welding Wire and Rod-Edition P 1 |
|
AECMA PREN 4334 |
Aerospace Series Steel FE-WL1806 (15CrMnMoV5-4-9-3) Filler Metal for Welding Wire and Rod-Edition P 1 |
|
AECMA PREN 4335 |
Aerospace Series Steel FE-WA2602 (X4NiCrTiMoV26-15) Filler Metal for Welding Wire and Rod-Edition P 1 |
|
AECMA PREN 4336 |
Aerospace Series Steel FE-WA3801 (X4CrNiMn20-10-2) Filler Metal for Welding Wire and Rod-Edition P 1 |
|
AECMA PREN 4337 |
Aerospace Series Heat Resisting Alloy NI-WH8901 (NiCr16Ti3Mn2) Filler Metal for Welding Wire and Rod-Edition P 2; Supersedes Edition P 1: March 1997; Replaced by EN 4337 |
|
AECMA PREN 4338 |
Aerospace Series Heat Resisting Alloy NI-WH3902 (NiCr25Mo10C) Filler Metal for Welding Wire and Rod-Edition P 2; Supersedes Edition P 1: March 1997; Replaced by EN 4338 |
|
AECMA PREN 4339 |
Aerospace Series Heat Resisting Alloy CO-WH4001 (CoCr29W9) Filler Metal for Welding Wire and Rod-Edition P 2; Supersedes Edition P 1: March 1997; Replaced by EN 4339 |
|
AECMA PREN 4341 |
Aerospace Series Aluminium Alloy AL-W46431 Filler Metal for Welding Wire and Rod-Edition P 2; Supersedes Edition P 1: March 1997; Replaced by EN 4341 |
|
AECMA PREN 4342 |
Aerospace Series Titanium TI-W99001 Filler Metal for Welding Wire and Rod-Edition P 2; Supersedes Edition P 1: March 1997; Replaced by EN 4342 |
|
AECMA PREN 4343 |
Aerospace Series Steel FE-WM1001 (X13Cr12) Filler Metal for Welding Wire and Rod-Edition P 1 |
|
AECMA PREN 4344 |
Aerospace Series Steel FE-WM1002 (X13Cr13) Filler Metal for Welding Wire and Rod-Edition P 2; Supersedes Edition P 1: March 1997; Replaced by EN 4344 |
|
AECMA PREN 4346 |
Aerospace Series Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) Vacuum Induction Melted and Consumable Electrode Remelted Softened Forging Stock a or D Less Than or Equal to 300mm-Edition P 1 |
|
AECMA PREN 4347 |
Aerospace Series Steel FE-PM1506 (X3CrNiMoAl13-8-2) Vacuum Induction Melted and Consumable Electrode Remelted Softened Forging Stock a or D Less Than or Equal to 300mm-Edition P 1 |
|
AECMA PREN 4351 |
Aerospace Series Rod Ends, with Self-Aligning Double Row Ball Bearings and Threaded Shank in Corrosion Resisting Steel Dimensions and Loads Inch Series-Edition P 1 |
|
AECMA PREN 4352 |
Aerospace Series Bolts, Double Hexagon Head with Lockwire Holes, Relieved Shank, Long Thread, in Heat Resisting Nickel Base Alloy NI-PH2601 (Inconel 718), MoS2 Coated Classification: 1 550 MPa (at Ambient Temperature) / 425 Degrees C-Edition P 1 |
|
AECMA PREN 4354 |
Aerospace Series Drivers, Relieved, Six Lobe Recess |
|
AECMA PREN 4354 |
Aerospace Series Six Lobe Recess Drivers, Relieved-Edition P 1 |
|
AECMA PREN 4355 |
Aerospace Series Driver, Socket, Six Lobe Recess-Superseding C8 N1064 |
|
AECMA PREN 4355 |
Aerospace Series Six Lobe Recess Drivers, Socket-Edition P 1 |
|
AECMA PREN 4356 |
Aerospace Series Driver, Six Lobe Recess-Superseding C8 N1064 |
|
AECMA PREN 4356 |
Aerospace Series Six Lobe Recess Drivers, Short-Edition P 1 |
|
AECMA PREN 4357 |
Aerospace Series Driver, Handle, Six Lobe Recess-Superseding C8 N1064 |
|
AECMA PREN 4357 |
Aerospace Series Six Lobe Recess Drivers, Handle-Edition P 1 |
|
AECMA PREN 4358 |
Aerospace Series Driver, Double Ended 90 Degree, Six Lobe Recess-Superseding C8 N1064 |
|
AECMA PREN 4358 |
Aerospace Series Six Lobe Recess Drivers, Double Ended, 90 Degrees-Edition P 1 |
|
AECMA PREN 4359 |
Aerospace Series Driver, Six Lobe Recess, Technical Specification-Superseding C8 N1064 |
|
AECMA PREN 4360 |
Aerospace Series Rivets, Solid, 100 Degree Countersunk Reduced Head with Dome, in Aluminium Alloy 7050, Anodized or Chromated, Metric Series-Edition P 1 |
|
AECMA PREN 4360 |
Aerospace Series Rivets, Solid, 100 Degree Countersunk Reduced Head with Dome, in Aluminium Alloy 7050, Anodized or Chromated, Metric Series-Edition P 3; Supersedes Edition P 2 December 1999 |
|
AECMA PREN 4361 |
Aerospace Series Rivets, Solid, 100 Degree Countersunk Reduced Head with Dome, in Aluminium Alloy 5056A, Anodized or Chromated, Metric Series-Edition P 1 |
|
AECMA PREN 4361 |
Aerospace Series Rivets, Solid, 100 Degree Countersunk Reduced Head with Dome, in Aluminium Alloy 5056A, Anodized or Chromated, Metric Series-Edition P 3; Supersedes Edition P 2: December 1999 |
|
AECMA PREN 4362 |
Aerospace Series Rivets, Solid, 100 Degree Countersunk Reduced Head, in Titanium Alloy Ti 44,5 Cb, Metric Series-Edition P 2 |
|
AECMA PREN 4362 |
Aerospace Series Rivets, Solid, 100 Degree Countersunk Reduced Headin Titanium Alloy Ti 44,5 Cb, Metric Series-Edition P 1 |
|
AECMA PREN 4363 |
Aerospace Series Rivets, Solid, 100 Degree Countersunk Reduced Head in Titanium Alloy Ti 44,5 Cb, with Aluminium Pigmented Coating, Metric Series-Edition P 1 |
|
AECMA PREN 4363 |
Aerospace Series Rivets, Solid, 100 Degree Countersunk Reduced Head, in Titanium Alloy Ti 44,5 Cb, with Aluminium Pigmented Coating, Metric Series-Edition P 2 |
|
AECMA PREN 4364 |
Aerospace Series Cast Acrylic Properties-Edition P 1 |
|
AECMA PREN 4367 |
Aerospace Series Cast Acrylic Sheets Dimensions-Edition P 1 |
|
AECMA PREN 4368 |
Aerospace Series Heat Resisting Alloy NI-CD1701 (NiCo15Cr10Al6Ti5Mo3) Non Heat Treated Remelting Stock-Edition P 1 |
|
AECMA PREN 4369 |
Aerospace Series Heat Resisting Alloy NI-PH1701 (NiCr15Co14Al5Ti4Mo4) Solution Treated and Precipitation Treated Bar and Section De Less Than or Equal to 100 mm-Edition P 1 |
|
AECMA PREN 4370 |
Aerospace Series Heat Resisting Alloy NI-PH1701 (NiCr15Co14Al5Ti4Mo4) Non Heat Treated Forging Stock a or D Less Than or Equal to 100 mm-Edition P 1 |
|
AECMA PREN 4371 |
Aerospace Series Heat Resisting Alloy NI-PD9001 (NiCu31) Non Heat Treated Bar Rivets D Less Than or Equal to 10 mm-Edition P 1 |
|
AECMA PREN 4373 |
Aerospace Series Heat Resisting Alloy NI-PD9001 (NiCu31) Annealed Seamless Tube D Less Than or Equal to 75 mm, a Less Than or Equal to 3 mm-Edition P 1 |
|
AECMA PREN 4374 |
Aerospace Series Heat Resisting Alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) Solution Treated and Precipitation Treated Bar and Section De Less Than or Equal to 200 mm-Edition P 1 |
|
AECMA PREN 4375 |
Aerospace Series Heat Resisting Alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) Non Heat Treated Forging Stock a or D Less Than or Equal to 250 mm-Edition P 1 |
|
AECMA PREN 4376 |
Aerospace Series Heat Resisting Alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) Solution and Precipitation Treated Bars and Sections a or D Less Than or Equal to 200 mm-Edition P1 |
|
AECMA PREN 4376 |
Aerospace Series Heat Resisting Alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) Solution Treated and Precipitation Treated Bar and Section De Less Than or Equal to 200 mm-Edition P 1 |
|
AECMA PREN 4377 |
Aerospace Series Heat Resisting Alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) as Wrought Forging Stock a or D Less Than or Equal to 300 mm-Edition P1 |
|
AECMA PREN 4377 |
Aerospace Series Heat Resisting Alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) Non Heat Treated Forging Stock a or D Less Than or Equal to 300 mm-Edition p 1 |
|
AECMA PREN 4378 |
Aerospace Series Heat Resisting Alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) Solution Treated and Precipitation Treated Wire for Rivets D Less Than or Equal to 1,6 mm-Edition P 1 |
|
AECMA PREN 4379 |
Aerospace Series Heat Resisting Alloy NI-PH3601 (NiCr22Mo9Nb) Solution Treated Forging De Less Than or Equal to 200 mm-Edition P 1 |
|
AECMA PREN 4380 |
Aerospace Series Heat Resisting Alloy NI-PH3601 (NiCr22Mo9Nb) Solution Treated Bar and Section De Less Than or Equal to 200 mm-Edition P 1 |
|
AECMA PREN 4381 |
Aerospace Series Heat Resisting Alloy NI-PH3601 (NiCr22Mo9Nb) Solution Treated Seamless Tubes for Structural Application D Less Than or Equal to 50 mm, a Less Than or Equal to 3 mm-Edition P 1 |
|
AECMA PREN 4383 |
Aerospace Series Heat Resisting Alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) Non Heat Treated Remelting Stock-Edition P 1 |
|
AECMA PREN 4384 |
Aerospace Series Heat Resisting Alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) Non Heat Treated Remelting Stock-Edition P 1 |
|
AECMA PREN 4385 |
Aerospace Series Non-Metallic Materials General Organisation of Standardisation Links between Types of Standards-Edition P 1 |
|
AECMA PREN 4385 |
Aerospace Series Non-Metallic Materials General Organisation of Standardisation Links between Types of Standards-Edition P 2 |
|
AECMA PREN 4386 |
Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Test Method Standards-Edition P 1 |
|
AECMA PREN 4386 |
Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Test Method Standards-Edition P 2; Replaced by TR 4386 |
|
AECMA PREN 4387 |
Aerospace Series Non-Metallic Materials Rules for Drafting and Presentationof Technical Specifications-Edition P 1 |
|
AECMA PREN 4390 |
Aerospace Series Nuts, Anchor, Self-Locking, Floating, Self-Aligning, Two Lug, in Heat Resisting Steel, Silver Plated, Classification : 900 MPa (at Ambient Temperature) / 425 Degrees Celsius-Edition P 1 |
|
AECMA PREN 4395 |
Aerospace Series Shaft-Nuts, Self-Locking, in Alloy Steel FE-PL76, Silver Plated |
|
AECMA PREN 4396 |
Aerospace Series Shaft-Nuts, Self-Locking, in Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Edition P 1 |
|
AECMA PREN 4397 |
Aerospace Series Shaft-Nuts, Self-Locking, Left-Hand Thread, in Alloy Steel FE-PL76, Silver Plated-Edition P1 |
|
AECMA PREN 4398 |
Aerospace Series Rings, Self-Locking, in Alloy Steel FE-PL76, Silver Plated-Edition P1 |
|
AECMA PREN 4399 |
Aerospace Series Rings, Threaded, Self-Locking, in Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Edition P 1 |
|
AECMA PREN 4399 |
Aerospace Series Rings, Threaded, Self-Locking, in Heat Resisting Steel FE-PA92HT (A286), Silver Plated-Edition P1 |
|
AECMA PREN 4400-3 |
Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 3: Bar and Section-Edition P1 |
|
AECMA PREN 4400-6 |
Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 6: Forging Stock-Edition P1 |
|
AECMA PREN 4400-7 |
Aerospace series Aluminium and aluminium- and magnesium- alloys Technical specification Part 7: Aluminium alloy forgings-Edition: P1 |
|
AECMA PREN 4401 |
Aerospace Series Lockbolts, Protruding Head, Sheartype, Close Tolerance, in Titanium Alloy TI-P64001, with Aluminium Pigmented Coating, Metric Series Classification: 1 100 MPa (at Ambient Temperature)/ 315 Degrees Celsius-Edition P 1 |
|
AECMA PREN 4401 |
Aerospace Series Lockbolts, Protruding Head, Sheartype, Close Tolerance, in Titanium Alloy, Aluminium Pigmented Organic Coating, Lubrication with Cetylic Alcohol, Metric Series, Classification: 1 100 MPa (at Ambient Temperature)/315 Degrees C |
|
AECMA PREN 4402 |
Aerospace Series Lockbolts, 100 Degree Countersunk Normal Head, Sheartype, Close Tolerance, in Titanium Alloy TI-P64001. with Aluminium Pigmented Coating, Metric Series Classification: 1 100 MPa (at Ambient Temperature)/ 315 Degrees Celsius-Edition P 1 |
|
AECMA PREN 4402 |
Aerospace Series Lockbolts, 100 Degree Countersunk Normal Head, Sheartype, Close Tolerance, in Titanium Alloy, Aluminium Pigmented Organic Coating, Lubrication with Cetylic Alcohol, Metric Series, Classification: 1 100 MPa (at Ambient Temperature)/315 Degrees Celsius |
|
AECMA PREN 4403 |
Aerospace Series Rivets, Solid, 100 Degree Countersunk Normal Head, in Titanium Alloy Ti 44,5 Cb, with Aluminium Pigmented Coating, Metric Series-Edition P 2 |
|
AECMA PREN 4403 |
Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head, in Titanium Alloy Ti 45,5 Cb, with Aluminium Pigmented Organic Coating, Metric Series-Edition P 1 |
|
AECMA PREN 4403 |
Aerospace Series Rivets, Solid, 100 Degrees Normal Countersunk Head, in Titanium Alloy Ti 45,5 Cb, with Aluminium Pigmented Organic Coating, Metric Series-Edition P1 |
|
AECMA PREN 4404 |
Aerospace Series Rivets, Solid, 100 Degree Universal Head, in Titanium Alloy Ti 45,5 Cb, with Aluminium Pigmented Organic Coating, Metric Series-Edition P 1 |
|
AECMA PREN 4404 |
Aerospace Series Rivets, Solid, Universal Head, in Titanium Alloy Ti 44,5 Cb, with Aluminium Pigmented Coating, Metric Series-Edition P 2 |
|
AECMA PREN 4404 |
Aerospace Series Rivets, Solid, Universal Head, in Titanium Alloy Ti 45,5 Cb, with Aluminium Pigmented Organic Coating, Metric Series-Edition P1 |
|
AECMA PREN 4405-001 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromate - Free Two Component Cold Curing Primer Part 1: Minimum Requirements |
|
AECMA PREN 4405-002 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromate - Free Two Component Cold Curing Primer Part 2: High Corrosion Resistance |
|
AECMA PREN 4405-003 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromate - Free Two Component Cold Curing Primer Part 3: High Corrosion and Fluid Resistance |
|
AECMA PREN 4405-005 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromate - Free Two Component Cold Curing Primer Part 5: Surface Tolerance for Exterior Use |
|
AECMA PREN 4405-006 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromate Free Two Component Cold Curing Primer Part 6: High Corrosion Resistance for Military Application |
|
AECMA PREN 4406 |
Aerospace Series Paints and Varnishes Two Component Cold Curing Polyurethane Coating Abrasion Resistant-Edition P 1 |
|
AECMA PREN 4406 |
Aerospace Series Paints and Varnishes Two Component Cold Curing Polyurethane Finish Abrasion Resistant |
|
AECMA PREN 4407 |
Aerospace Series Bolts, Normal Hexagonal Head, Threaded to Head, in Titanium Alloy, Aluminium IVD Coated Classification: 1 100 MPa (at Ambient Temperature)/425 Degrees C-Edition P 1 |
|
AECMA PREN 4408-5 |
Aerospace Series Technical Drawings Representation of Parts Made of Composite Materials Part 5: Seams-Edition P 1 |
|
AECMA PREN 4409 |
Aerospace Series Square Bars, Extruded in Aluminium and Aluminium Alloys Thickness 6 mm Less Than or Equal to a Less Than or Equal to 200 mm Dimensions-Edition 1 |
|
AECMA PREN 4409 |
Aerospace Series Square Bars, Extruded in Aluminium and Aluminium Alloys Thickness 6 mm Less Than or Equal to a Less Than or Equal to 200 mm Dimensions-Edition P 1 |
|
AECMA PREN 4410 |
Aerospace Series Rectangular Bars, Extruded in Aluminium and Aluminium Alloys Thickness 6 mm Less Than or Equal to a Less Than or Equal to 160 mm Dimensions-Edition 1 |
|
AECMA PREN 4410 |
Aerospace Series Rectangular Bars, Extruded in Aluminium and Aluminium Alloys Thickness 6 mm Less Than or Equal to a Less Than or Equal to 160 mm Dimensions-Edition P 1 |
|
AECMA PREN 4411 |
Aerospace Series Sheets, Cold Rolled in Steel Thickness 0,5 mm Less Than or Equal to a Less Than or Equal to 3,0 mm Dimensions-Edition 1 |
|
AECMA PREN 4411 |
Aerospace Series Sheets, Cold Rolled in Steel Thickness 0,5 mm Less Than or Equal to a Less Than or Equal to 3,0 mm Dimensions-Edition P 1 |
|
AECMA PREN 4412 |
Aerospace Series Rings, Threaded, Self-Locking, Left-Handed Thread, in Alloy Steel FE-PL76, Silver Plated-Edition P1 |
|
AECMA PREN 4415 |
Aerospace Series Non-Metallic Materials Textiles Narrow Woven Fabrics Technical Specification |
|
AECMA PREN 4415 |
Aerospace Series Non-Metallic Materials Textiles Narrow Woven Fabrics Technical Specification-Edition P 1 |
|
AECMA PREN 4416 |
Aerospace Series Non-Metallic Materials Textiles Wide Woven Fabrics Technical Specification-Edition P 1 |
|
AECMA PREN 4419 |
Aerospace Series Washers, Chamfered, with Counterbore, in Alloy Steel, Cadmium Plated-Edition P 1 |
|
AECMA PREN 4420 |
Aerospace Series Clips, Spring Tension, in Alloy Steel FE-PA3903-Edition P 1 |
|
AECMA PREN 4420 |
Aerospace Series Spring Tension Clips of Electrical Wiring, in Alloy Steel (X12CrNi18-10)-Edition P1 |
|
AECMA PREN 4421 |
Aerospace Series Studs, in Titanium Alloy TI-P64001, MoS2 Coated, with Serrated Locking Ring in Corrosion Resisting Steel Strength Class: 1 100 MPa (at Ambient Temperature)-Edition P 1 |
|
AECMA PREN 4424 |
Aerospace Series Rod-Ends, Adjustable, Single Fork and Threaded Shank with Engagement: 1,5 x Thread Diameter in Titanium Alloys Dimensions and Loads-Edition P 1 |
|
AECMA PREN 4426 |
Aerospace Series Non-Metallic Materials Textiles Test Method Determination of Conductivity and pH of Aqueous Extracts-Edition P 1 |
|
AECMA PREN 4426 |
Aerospace Series Textiles Test Method Determination of Conductivity and pH of Aqueous Extracts |
|
AECMA PREN 4429 |
Aerospace series Non-metallic materials Textiles Testing of narrow woven fabrics Determination of warp bow-Editon P 1 |
|
AECMA PREN 4433 |
Aerospace Series Textiles Determination of the Number of Plaits Per Unit Length in Braided Textiles |
|
AECMA PREN 4434 |
Aerospace Series Copper or Copper Alloy Lightweight Conductors for Electrical Cables Product Standard (Normal and tight tolerances)-Edition P 2 |
|
AECMA PREN 4434 |
Aerospace Series Copper or Copper Alloy Lightweight Conductors for Electrical Cables Product Standard-Edition P 1 |
|
AECMA PREN 4435 |
Aerospace Series Rivets, Solid, 100 Degree Countersunk Normal Head, in Heat Resisting Nickel Base Alloy NI-PH2301 (Hastelloy X), Inch Based Series-Edition P 1 |
|
AECMA PREN 4438 |
Aerospace Series Metallic Materials Test Methods Linear Thermal Expansion of Solid Materials with a Vitreous Silica Dilatometer-Edition P 1 |
|
AECMA PREN 4442 |
Aerospace Series Clamps, Loop, Articulated, with Body and Woven Fabric Packing in Corrosion Resisting Steel-Edition P1; Superseding C 8 N |
|
AECMA PREN 4443 |
Aerospace Series Nuts, Elliptical Clinch, Self-Locking, MJ Threads, in Heat Resisting Steel FE-PA2601 (A286), MoS2 Coated Classification: 900 MPa (at Ambient Temperature) / 425 Degrees C-Edition P 1 |
|
AECMA PREN 4444 |
Aerospace Series Nuts, Elliptical Clinch, Self-Locking, in Heat Resisting Steel FE-PA2601 (A286), MoS2 Coated Classification: 900 MPa (at Ambient Temperature) / 425 Degrees C Technical Specification-Edition P 1 |
|
AECMA PREN 4445 |
Aerospace Series Nuts, Elliptical Clinch, Self-Locking Design Standard-Edition P 1 |
|
AECMA PREN 4446 |
Aerospace Series Elliptical Clinch Nuts, Self-Locking Installation Procedure-Edition P1; Superseding: C 8 N |
|
AECMA PREN 4446 |
Aerospace Series Nuts, Elliptical Clinch, Self-Locking Installation and Removal Procedure-Edition P 1 |
|
AECMA PREN 4447 |
Aerospace Series Nuts, Elliptical Clinch, Self-Locking, UNJ Threads, in Heat Resisting Steel FE-PA2601 (A286), MoS2 Coated Classification: 900 MPa (at Ambient Temperature) / 425 Degrees C-Edition P 1 |
|
AECMA PREN 4448 |
Aerospace Series Aluminium Alloy AL-P7050-T7452 Die Forgings a Less Than or Equal to 150 mm-Edition P 1 |
|
AECMA PREN 4449 |
Aerospace Series Aluminium Alloy AL-P7050-T76 Sheet 0,8 mm Less Than or Equal to a Less Than or Equal to 6 mm-Edition P 2 |
|
AECMA PREN 4449 |
Aerospace Series Aluminium Alloy AL-P7050-T7651 Sheet 0,8 mm Less Than or Equal to a Less Than or Equal to 6 mm-Edition P 1 |
|
AECMA PREN 4450 |
Aerospace Series Aluminium Alloy AL-P7050-T762 Sheet 0,8 mm Less Than or Equal to a Less Than or Equal to 6 mm-Edition P 1 |
|
AECMA PREN 4451 |
Aerospace Series Paints and Varnishes Corrosion Preventive Two Component Cold Curing Coating for Integral Fuel Tanks with Medium Fuel Temperature |
|
AECMA PREN 4457 |
Aerospace Series Aluminium Alloy AL-P7475-T7351 Plate 6 mm Less Than a Less Than or Equal to 100 mm-Edition P1 |
|
AECMA PREN 4458 |
Aerospace Series Studs, MJ Threads in Titanium Alloy TI-P64001, MoS2 Coated, with Serrated Locking Ring in Corrosion Resisting Steel Strength Class: 1 100 MPa (at Ambient Temperature) Technical Specification-Edition P 1 |
|
AECMA PREN 4458 |
Aerospace Series Studs, MJ Threads, in Titanium Alloy TI-P64001, MoS2 Coated, with Serrated Locking Ring in Corrosion Resisting Steel Strength Class: 1 100 MPa (at Ambient Temperature) Technical Specification-Edition 1 |
|
AECMA PREN 4459 |
Aerospace Series Studs, in Titanium Alloy TI-P64001, with Serrated Locking Ring in Corrosion Resisting Steel Design Standard-Edition P 1 |
|
AECMA PREN 4460 |
Aerospace Series Studs, in Titainium Alloy TI-P64001, with Serrated Locking Ring in Corrosion Resisting Steel Installation and Removal Procedure-Edition P 1 |
|
AECMA PREN 4460 |
Aerospace Series Studs, in Titainium Alloy TI-P64001, with Serrated Locking Ring in Corrosion Resisting Steel Installation and Removal Procedure-Edition P 1 |
|
AECMA PREN 4462 |
Aerospace Series Steel FE-PM1506 (X5CrNiMoAl13-8-2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Treated Bar a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 1 300 MPa-Edition P 1 |
|
AECMA PREN 4463 |
Aerospace Series Steel FE-PM1506 (X5CrNiMoAl13-8-2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Treated Bar a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 1 400 MPa-Edition P 1 |
|
AECMA PREN 4464 |
Aerospace Series Steel FE-PM1506 (X5CrNiMoAl13-8-2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Treated Forgings a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 1 200 MPa-Edition P 1 |
|
AECMA PREN 4464 |
Aerospace Series Steel FE-PM1506 (X5CrNiMoAlTi13.8.2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Hardened Forgings a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 1 200 MPa-Edition P1 |
|
AECMA PREN 4465 |
Aerospace Series Steel FE-PM1506 (X5CrNiMoAl13-8-2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Treated Forgings a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 1 300 MPa-Edition P 1 |
|
AECMA PREN 4465 |
Aerospace Series Steel FE-PM1506 (X5CrNiMoAlTi13.8.2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Hardened Forgings a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 1 300 MPa-Edition P1 |
|
AECMA PREN 4466 |
Aerospace Series Steel FE-PM1506 (X5CrNiMoAl13-8-2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Treated Forgings a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 1 400 MPa-Edition P 1 |
|
AECMA PREN 4466 |
Aerospace Series Steel FE-PM1506 (X5CrNiMoAlTi 13.8.2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Hardened Forgings a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 1 400 MPa-Edition P1 |
|
AECMA PREN 4467 |
Aerospace Series Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Treated Bar a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 1 200 MPa-Edition P 1 |
|
AECMA PREN 4468 |
Aerospace Series Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Treated Bar a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 1 300 MPa-Edition P 1 |
|
AECMA PREN 4469 |
Aerospace Series Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Treated Bar a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 1 400 MPa-Edition P 1 |
|
AECMA PREN 4470 |
Aerospace Series Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Treated Forgings a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 1 200 MPa-Edition P 1 |
|
AECMA PREN 4471 |
Aerospace Series Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Treated Forgings a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 1 300 MPa-Edition P 1 |
|
AECMA PREN 4472 |
Aerospace Series Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) Vacuum Induction Melted and Consumable Electrode Remelted Solution Treated and Precipitation Treated Forgings a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 1 400 MPa-Edition P 1 |
|
AECMA PREN 4476 |
Aerospace Series Paints and Varnishes Cold Curing Intermediate Coat |
|
AECMA PREN 4476 |
Aerospace Series Paints and Varnishes Polyurethane Cold Curing Intermediate Coat-Edition P 1 |
|
AECMA PREN 4477 |
Aerospace Sealing Compounds, Two-Component Polysulphide-Polymer Base Suitable for Brush Application for Temperatures from -55 Degrees Celsius to 120 Degrees Celsius Properties-P 9501 |
|
AECMA PREN 4479 |
Aerospace Sealing Compounds, Two-Component Polysulphide Polymer Base Suitable for Blow Gun, Spatula or Roll Application for Temperatures from -55 Degrees Celsius to 120 Degrees Celsius Properties-P 9503 |
|
AECMA PREN 4480 |
Aerospace Sealing Compounds, Two-Component Polysulphide Polymer Base Suitable for Brush Application for Temperatures from -55 Degrees Celsius to 135 Degrees Celsius Properties-P 9504 |
|
AECMA PREN 4481 |
Aerospace Sealing Compounds, Two-Component Polysulphide-Polymer Base Suitable for Blow Gun or Spatula Application for emperatures -55 Degrees Celsius to 135 Degrees Celsius Properties-PREN P 9505 |
|
AECMA PREN 4482 |
Aerospace Sealing Compounds, Two-Component Polysulphide Polymer Base Suitable for Blow Gun, Spatula or Roll Application for Temperature from -55 Degrees Celsius to 135 Degrees Celsius Properties-P 9506 |
|
AECMA PREN 4483 |
Aerospace Sealing Compounds, Two-Component Polysulphide-Polymer Base Suitable for Brush Application for Temperatures from -55 Degrees Celsius to 95 Degrees Celsius Corrosion Inhibiting Properties-P 9561 |
|
AECMA PREN 4484 |
Aerospace Sealing Compounds, Two-Component Polysulphide Polymer Base Suitable for Blow Gun or Spatula Application for Temperatures from -55 Degrees Celsius to 95 Degrees Celsius Corrosion Inhibiting Properties-P 9562 |
|
AECMA PREN 4485 |
Aerospace Sealing Compounds, Two-Component Polysulphide Polymer Base Suitable for Blow Gun Spatula or Roll Application for Temperatures from -55 Degrees Celsius to 95 Degrees Celsius Corrosion Inhibiting Properties-P 9563 |
|
AECMA PREN 4486 |
Aerospace Series Steel Balls-Edition P 1 |
|
AECMA PREN 4487 |
Aerospace Series Carbon Filament Yarn 5500 MPa Nominal Strength 300 GPa Nominal Modulus |
|
AECMA PREN 4488 |
Aerospace Series Non-Metallic Materials Anaerobic Polymerisable Compounds Threadlocking Torque Strength 2 Nm-Edition P 1 |
|
AECMA PREN 4489 |
Aerospace Series Non-Metallic Materials Anaerobic Polymerisable Compounds Threadlocking Torque Strength 5 Nm-Edition P 1 |
|
AECMA PREN 4490 |
Aerospace Series Non-Metallic Materials Anaerobic Polymerisable Compounds Threadlocking Torque Strength 10 Nm-Edition P 1 |
|
AECMA PREN 4491 |
Aerospace Series Non-Metallic Materials Anaerobic Polymerisable Compounds Threadlocking Torque Strength 16 Nm-Edition P1 |
|
AECMA PREN 4492 |
Aerospace Series Non-Metallic Materials Anaerobic Polymerisable Compounds Threadlocking Torque Strength 19 Nm-Edition P 1 |
|
AECMA PREN 4494 |
Aerospace Series Rings, Split, in Steel-Edition P 1 |
|
AECMA PREN 4495 |
Aerospace Series Bolts, Normal Hexagonal Head, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, with Aluminium Pigmented Coating Classification: 1 100 MPa ( at Ambient Temperature)/ 315 C Degrees-Edition P 1 |
|
AECMA PREN 4496 |
Aerospace Series Screws, 100 Degree Countersunk Normal Head, Offset Cruciform Recess, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, with Aluminium Pigmented Coating Classification: 1 100 MPa (at Ambient Temperature)/ 315 C Degrees-Edition P 1 |
|
AECMA PREN 4497 |
Aerospace Series Screws, Pan Head, Offset Cruciform Recess, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, Aluminium Pigmented Coating Classification: 1 100 MPa (at Ambient Temperature) / 315 Degrees Celsius-Edition P1 |
|
AECMA PREN 4497 |
Aerospace Series Screws, Pan Head, Offset Cruciform Recess, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, with Aluminium Pigmented Coating Classification: 1 100 MPa (at Ambient Temperature)/ 315 C Degrees-Edition P 1 |
|
AECMA PREN 4498 |
Aerospace Series Bolts, Large Bihexagonal Head, Close Tolerance Normal Shank, Medium Length Thread, in Heat Resisting Nickel Base Alloy, Passivated, Aluminium Pigmented Coating Classification: 1 550 MPa (at Ambient Temperature) / 315 Degrees Celsius-Edition P1 |
|
AECMA PREN 4498 |
Aerospace Series Bolts, Large Bihexigonal Head, Close Tolerance Normal Shank, Medium Length Thread, in Heat Resisting Nickel Base Alloy, Passivated, with Aluminium Pigmented Coating Classification: 1 550 MPa (at Ambient Temperature)/ 315 C Degrees-Edition P 1 |
|
AECMA PREN 4499 |
Aerospace Series Screws, 100 Degree Countersunk Reduced Head, Offset Cruciform Recess, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, with Aluminium Pigmented Coating Classification: 1 100 MPa (at Ambient Temperature)/ 315 C Degrees-Edition P 1 |
|
AECMA PREN 4499 |
Aerospace Series Screws, 100 Degrees Countersunk Reduced Head, Offset Cruciform Recess, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, Aluminium Pigmented Coating Classification: 1 100 MPa (at Ambient Temperature) / 315 Degrees Celsius-Edition P1 |
|
AECMA PREN 4500-1 |
Aerospace Series Metallic Materials Rules for Drafting and Presentation for Material Standards Part 1 : General Rules-Issue P 1 |
|
AECMA PREN 4500-2 |
Aerospace Series Metallic Materials Rules for Drafting and Presentation of Material Standards Part 2 : Specific Rules for Aluminium, Aluminium Alloys and Magnesium Alloys-Edition P1 |
|
AECMA PREN 4500-3 |
Aerospace Series Metallic Materials Rules for Drafting and Presentation of Material Standards Part 3 : Specific Rules for Heat Resisting Alloys-Edition P 1 |
|
AECMA PREN 4500-3 CORR |
Aerospace Series Metallic Materials Rules for Drafting and Presentation of Material Standards Part 3 : Specific Rules for Heat Resisting Alloys-Edition P 1; Corrigendum 1996 |
|
AECMA PREN 4500-4 |
Aerospace Series Metallic Materials Rules for Drafting and Presentation of Material Standards Part 4 : Specific Rules for Titanium and Titanium Alloys-Edition P 1 |
|
AECMA PREN 4500-5 |
Aerospace Series Metallic Materials Rules for Drafting and Presentation of Material Standards Part 5 : Specific Rules for Steels-Edition P 1 |
|
AECMA PREN 4500-5 |
Aerospace Series Metallic Materials Rules for Drafting and Presentation of Material Standards Part 5 : Specific Rules for Steels-Edition P 1; Corrigendum:07/05/96 |
|
AECMA PREN 4500-6 |
Aerospace Series Metallic Materials Rules for Drafting and Presentation of Material Standards Part 6 : Specific Rules for Filler Metals For Brazing-Edition P 1 |
|
AECMA PREN 4501 |
Aerospace Series Bolts, Shouldered, Thin Hexagonal Head, Close Tolerance Shank, Short Thread, in Titanium Alloy, Anodized, Aluminium Pigmented Coating Classification: 1 100 MPa (at Ambient Temperature) / 315 Degrees Celsius-Edition P1 |
|
AECMA PREN 4501 |
Aerospace Series Bolts, Shouldered, Thin Hexigonal Head, Close Tolerance Shank, Short Thread, in Titanium Alloy, Anodized, with Aluminium Pigmented Coating Classification: 1 100 MPa (at Ambient Temperature)/ 315 C Degrees-Edition P 1 |
|
AECMA PREN 4502 |
Aerospace Series Washers, Flat, for Riveting, in Heat Resisting Steel FE-PA4901 (Multimet), Inch Based Series-Edition P 1 |
|
AECMA PREN 4502 |
Aerospace Series Washers, Flat, for Riveting, in Heat Resisting Steel FE-PA91HT (Multimet)-Edition P 1 |
|
AECMA PREN 4503 |
Aerospace Series Non-Metallic Materials Textiles Test Method Determination of Water Soluble Chloride and Sulfate of Aqueous Extracts-Edition P 1 |
|
AECMA PREN 4503 |
Aerospace Series Textiles Test Method Determination of Water Soluble Chloride and Sulfate of Aqueous Extracts |
|
AECMA PREN 4504 |
Aerospace Series Non-Metallic Materials Textiles Test Method Determination of Flexibility of Narrow Fabrics-Edition P 1 |
|
AECMA PREN 4504 |
Aerospace Series Textiles Test Method Determination of Flexibility of Narrow Fabrics |
|
AECMA PREN 4505 |
Aerospace Series Textiles Test Method Determination of Dimensional Stability-Edition P 1 |
|
AECMA PREN 4506 |
Aerospace Series Determination of Coefficients of Friction of Bolts and Nuts under Specified Conditions-Edition P 1 |
|
AECMA PREN 4507 |
Aerospace Series Non-Metallic Materials Textiles Test Method Determination of Water Extractable Matterm-Edition P 1 |
|
AECMA PREN 4508 |
Aerospace series Paints and Varnishes Test method for anti slip coatings Determination of the sliding friction behaviour-Edition P 1 |
|
AECMA PREN 4508 |
Aerospace Series Test Method for Anti Slip Coatings Determination of the Sliding Friction Behaviour |
|
AECMA PREN 4509 |
Aerospace Series, Screws, 100 Degree Countersunk Normal Head, Offset Cruciform Recess, Threaded to Head, in Titanium Alloy, Anodized, Aluminium Pigmented Coating Classification: 1 100 MPa (at Ambient Temperature) / 315 Degrees Celsius-Edition P1 |
|
AECMA PREN 4509 |
Aerospace Series, Screws, 100 Degree Countersunk Normal Head, Offset Cruciform Recess, Threaded to Head, in Titanium Alloy, Anodized, with Aluminium Pigmented Coating Classification: 1 100 MPa (at Ambient Temperature)/ 315 Degrees-Edition P 1 |
|
AECMA PREN 4511 |
Aerospace Series Heat Resisting Alloy NI-PH2301 (NiCr22FeMo) Solution Treated and Cold Worked Wire for Rivets 1,6 mm Less Than or Equal to D Less Than or Equal to 10 mm-Edition P1 |
|
AECMA PREN 4511 |
Aerospace Series Heat Resisting Alloy NI-PH2301 (NiCr22FeMo) Solution Treated and Cold Worked Wire for Rivets 1,6 mm Less Than or Equal to D Less Than or Equal to 10 mm-Edition P1 |
|
AECMA PREN 4523 |
Aerospace Series Metallic Materials Test Methods Compression Testing-Edition P1 |
|
AECMA PREN 4525 |
Aerospace Series Aluminium and Aluminium Alloys Test Methods Shear Testing-Edition P1 |
|
AECMA PREN 4526 |
Aerospace Series Metallic Materials Test Methods Sharp Edge-Notch Tensile Testing for Sheet and Strip-Edition P 1 |
|
AECMA PREN 4526 |
Aerospace Series Metallic Materials Test Methods Sharp Edge-Notch Tensile Testing for Sheet and Strip-Edition P 1; Supersedes EN 2002-23 P1 (in Part 1) |
|
AECMA PREN 4528 |
Aerospace Series Steel FE-PA3903 (X12CrNi18-10) Cold Rolled Strip for Springs a Less Than or Equal to 3 mm 1 250 MPa Less Than or Equal to Rm Less Than 1 640 MPa-Edition P1 |
|
AECMA PREN 4529-001 |
Aerospace Series Elements of Electrical and Optical Connection Sealing Plugs Part 001: Technical Specification-Edition P 1 |
|
AECMA PREN 4529-002 |
Aerospace Series Elements of Electrical and Optical Connection Sealing Plugs Part 002: Index of Product Standards-Edition P 1 |
|
AECMA PREN 4530-001 |
Aerospace Series Sealing Sleeves Used in Elements of Connection Part 001: Technical Specification-Edition P1 |
|
AECMA PREN 4530-002 |
Aerospace Series Sealing Sleeves Used in Elements of Connection Part 002: List and Utilisation of Sealing Sleeves-Edition P 1 |
|
AECMA PREN 4530-002 |
Aerospace Series Sealing Sleeves Used in Elements of Connection Part 002: List and Utilisation of Sealing Sleeves-Edition P1 |
|
AECMA PREN 4530-005 |
Aerospace Series Sealing Sleeves Used in Elements of Connection Part 005: Sealing Sleeves for External Diameter Cable 3 mm to 4,1 mm Product Standard-Edition 2E |
|
AECMA PREN 4530-005 |
Aerospace Series Sealing Sleeves Used in Elements of Connection Part 005: Sealing Sleeves for External Diameter Cable 3 mm to 4,1 mm Product Standard-Edition P 1 |
|
AECMA PREN 4530-006 |
Aerospace Series Sealing Sleeves Used in Elements of Connection Part 006: Sealing Sleeves for External Diameter Cable 4,68 mm to 5,05 mm Product Standard-Edition 2E |
|
AECMA PREN 4530-006 |
Aerospace Series Sealing Sleeves Used in Elements of Connection Part 006: Sealing Sleeves for External Diameter Cable 4,68 mm to 5,05 mm Product Standard-Edition P 1 |
|
AECMA PREN 4531-001 |
Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring Flush contacts Part 001: Technical specification-Edition P 1 |
|
AECMA PREN 4531-002 |
Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring Flush contacts Part 002: Specification of performance and contact arrangements-Edition P 1 |
|
AECMA PREN 4531-003 |
Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring Flush contacts Part 003: Square flange receptacle Product standard-Edition P 1 |
|
AECMA PREN 4531-004 |
Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring Flush contacts Part 004: Jam nut receptacle Product standard-Edition P 1 |
|
AECMA PREN 4531-005 |
Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring Flush contacts Part 005: Plug Product standard-Edition P 1 |
|
AECMA PREN 4531-101 |
Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring Flush contacts Part 101: Optical contact for EN C2\10\A cable-55 degrees celsius to 125 degrees celsius Product Standard-Editon P 1 |
|
AECMA PREN 4532 |
Aerospace series Cables, optical, single core 200 µm/280 µm fibre, 2,5 mm outer jacket Technical specification-Edition P 1 |
|
AECMA PREN 4533-003 |
Aerospace series Fibre optic systems Handbook Part 003: Looming and installation practices-Edition P 1 |
|
AECMA PREN 4533-004 |
Aerospace series Fibre optic systems Handbook Part 004: Repair, maintenance and inspection-Edition P 1 |
|
AECMA PREN 4538-1 |
Aerospace Series Bearings, Spherical Plain, in Corrosion Resisting Steel with Self-Lubricating Liner Elevated Load under Low Oscillations Narrow Series Dimensions and Loads Metric Series-Edition P 1 |
|
AECMA PREN 4545 |
Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Plate 20 mm Less Than or Equal to a Less Than or Equal to 50 mm 1 080 MPa Less Than or Equal to Rm Less Than or Equal to 1 280 MPa-Edition P 1 |
|
AECMA PREN 4545 |
Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Plate 20 mm Less Than or Equal to a Less Than or Equal to 50 mm 1 080 MPa Less Than or Equal to Rm Less Than or Equal to 1 280 MPa-Edition P1 |
|
AECMA PREN 4549 |
Aerospace Series Pipe Coupling, in Heat Resisting Steel or in Heat Resisting Nickel Alloy Coupling End, Welded Design Configuration Inch Series-Edition P 1 |
|
AECMA PREN 4550-2 |
Aerospace Series Pipe Coupling, 37 Degree, Design Configuration Inch Series Part 2: Port Ends-Edition P 1 |
|
AECMA PREN 4550-4 |
Aerospace Series Pipe Coupling, 37 Degree, Design Configuration Inch Series Part 4: Female Sealing Ends-Edition P 1 |
|
AECMA PREN 4552 |
Aerospace Series Pipe Coupling, 37 Degree, Spherical, in Heat Resisting Steel Straight Nipples, Welded Inch Series-Edition P 1 |
|
AECMA PREN 4553 |
Aerospace Series Pipe Coupling, 37 Degree, Spherical, in Heat Resisting Steel Elbow 90 Degree Nipples, Welded Inch Series-Edition P 1 |
|
AECMA PREN 4554 |
Aerospace Series Pipe Coupling, 37 Degree, Spherical, in Heat Resisting Steel Straight Unions, Threaded Inch Series-Edition P 1 |
|
AECMA PREN 4555 |
Aerospace Series Pipe Coupling, 37 Degree, in Heat Resisting Steel Ferrules, Welded Inch Series-Edition P 1 |
|
AECMA PREN 4556 |
Aerospace Series Pipe Coupling, 37 Degree, in Heat Resisting Steel Cap Assemblies Inch Series-Edition P 1 |
|
AECMA PREN 4557 |
Aerospace Series Pipe Coupling, 37 Degree, Spherical, in Heat Resisting Steel Tees Nipples, Welded Inch Series-Edition P 1 |
|
AECMA PREN 4560 |
Aerospace Series Pipe Coupling, 37 Degree, Spherical, Up to 21 000 kPa Inch Series Technical Specification-Edition P 1 |
|
AECMA PREN 4561 |
Aerospace Series Pipe Coupling, Welded, in Heat Resisting Steel Elbow 90 Degree Inch Series-Edition P 1 |
|
AECMA PREN 4562 |
Aerospace Series Pipe Coupling, Welded, in Heat Resisting Steel Reductors Inch Series-Edition P 1 |
|
AECMA PREN 4563 |
Aerospace Series Pipe Coupling, Welded, in Heat Resisting Steel Tees Inch Series-Edition P 1 |
|
AECMA PREN 4566 |
Aerospace Series Heat Resisting Alloy CO-PH4101 (CoCr20W15Ni) Vacuum Melted Solution Treated Forgings De Less Than or Equal to 100 mm-Edition P1 |
|
AECMA PREN 4566 |
Aerospace Series Heat Resisting Alloy CO-PH4101 (CoCr20W15Ni) Vacuum Melted Solution Treated Forgings De Less Than or Equal to 100 mm-Edition P1; Superseding PREN 2163 Edition 1: May 1980 |
|
AECMA PREN 4567 |
Aerospace Series Heat Resisting Alloy CO-PH4101 (CoCr20W15Ni) Vacuum Melted solution Treated Bar and Section a or D Less Than or Equal to 100 mm-Edition P1 |
|
AECMA PREN 4568 |
Aerospace Series Heat Resisting Alloy CO-PH4101 (CoCr20W15Ni) Vacuum Melted Solution Treated Sheet and Strip a Less Than or Equal to 6 mm-Edition P1 |
|
AECMA PREN 4569 |
Aerospace Series Heat Resisting Alloy CO-PH4101 (CoCr20W15Ni) Vacuum Melted Solution Treated Wire D Less Than or Equal to 4 mm-Edition P1 |
|
AECMA PREN 4570 |
Aerospace Series Heat Resisting Alloy FE-PA4901 (X12CrNiCoMoW21-20) Solution Treated Forgings De Less Than or Equal to 100 mm-Edition P1 |
|
AECMA PREN 4571 |
Aerospace Series Heat Resisting Alloy FE-PA4901 (X12CrNiCoMoW21-20) Solution Treated Bar and Section De Less Than or Equal to 100 mm-Edition P1 |
|
AECMA PREN 4572 |
Aerospace Series Heat Resisting Alloy FE-PA4901 (X12CrNiCoMoW21-20) Solution Treated Sheet and Strip a Less Than or Equal to 3 mm-Edition P1 |
|
AECMA PREN 4573 |
Aerospace Series Heat Resisting Alloy FE-PA4901 (X12CrNiCoMoW21-20) Solution Treated and Precipitation Treated Bar and Section De Less Than or Equal to 100 mm-Edition P1 |
|
AECMA PREN 4574 |
Aerospace Series Heat Resisting Alloy FE-PA4901 (X12CrNiCoMoW21-20) Solution Treated and Precipitation Treated Forgings De Less Than or Equal to 100 mm-Edition P1 |
|
AECMA PREN 4575 |
Aerospace Series Heat Resisting Alloy FE-PA4901 (X12CrNiCoMoW21-20) Solution Treated and Descaled Sheet and Plate 3 mm Less Than a Less Than or Equal to 50 mm-Edition P1 |
|
AECMA PREN 4575 |
Aerospace Series Heat Resisting Alloy FE-PA4901 (X12CrNiCoMoW21-20) Solution Treated and Descaled Sheet and Plate 3 mm Less Than a Less Than or Equal to 50 mm-Edition P1; Superseding PREN 2416 Issue E1: May 1980 |
|
AECMA PREN 4585 |
Aerospace Series Clips, Spring Tension Technical Specification-Edition P 1 |
|
AECMA PREN 4588 |
Aerospace Series Paints and Varnishes Two Component, Cold Curing Polyurethane Paint, Anti Slip |
|
AECMA PREN 4588 |
Aerospace Series Paints and Varnishes Two Component, Cold Curing Polyurethane Paint, Anti Slip-Edition P 1 |
|
AECMA PREN 4590 |
Aerospace Series Retainers, Spring, Sheet Metal, for Self-Locking Barrel Nuts, in Corrosion Resisting Steel, Passivated-Editino P 1 |
|
AECMA PREN 4593 |
Aerospace Series Non-Metallic Materials Paints and Varnishes Test Method Determination of Solar Absorptance-Edition P 1 |
|
AECMA PREN 4593 |
Aerospace Series Paints and Varnishes Determination of Solar Absorptance |
|
AECMA PREN 4594 |
Aerospace Series Paints and Varnishes Two Component Cold Curing Polyurethane Finish Part 1 : Supersonic Erosion Resistance |
|
AECMA PREN 4594 |
Aerospace Series Paints and Varnishes Two Component Cold Curing Polyurethane Finish Supersonic Erosion Resistance-Edition P 1 |
|
AECMA PREN 4595 |
Aerospace Series Paints and Varnishes Two Component Cold Curing Polyurethane Finish Part 2 : Subsonic Erosion Resistance |
|
AECMA PREN 4595 |
Aerospace Series Paints and Varnishes Two Component Cold Curing Polyurethane Finish Subsonic Erosion Resistance-Edition P 1 |
|
AECMA PREN 4603 |
Aerospace Series Molybdenum Disulphide Coatings of Fasteners Technical Specification-Edition P 1 |
|
AECMA PREN 4604-001 |
Aerospace Series Cable, Electrical, for Signal Transmission Part 001: Technical Specification-Edition P 2 |
|
AECMA PREN 4604-002 |
Aerospace Series Cable, Electrical, for Signal Transmission Part 002: General-Edition P 2 |
|
AECMA PREN 4604-003 |
Aerospace Series Cable, Electrical, for Signal Transmission Part 003: Coaxial Cable 50 Ohm, 200 Degrees C, Type WZ Product Standard-Edition P 1 |
|
AECMA PREN 4604-003 |
Aerospace Series Cable, Electrical, for Signal Transmission Part 003: Coaxial Cable 50 Ohm, 200 Degrees C, Type WZ Product Standard-Edition P 2 |
|
AECMA PREN 4604-004 |
Aerospace Series Cable, Electrical, for Signal Transmission Part 004: Cable, Microcoaxial, High Immunity, 50 Ohms, 200 Degrees C, Type WS Product Standard-Edition P 1 |
|
AECMA PREN 4604-004 |
Aerospace Series Cable, Electrical, for Signal Transmission Part 004: Cable, Microcoaxial, High Immunity, 50 Ohms, 200 Degrees C, Type WS Product Standard-Edition P 2 |
|
AECMA PREN 4604-004 |
Aerospace series Cable, electrical, for signal transmission Part 004: Cable, microcoaxial, high immunity, 50 Ohms, 200 Degrees C, type WS Product standard-Edition P 3 |
|
AECMA PREN 4604-005 |
Aerospace Series Cable, Electrical, for Signal Transmission Part 005: Cable, Coaxial, 75 Ohms, 200 Degrees C, Type WL Product Standard-Ediiton P 1 |
|
AECMA PREN 4604-005 |
Aerospace Series Cable, Electrical, for Signal Transmission Part 005: Cable, Coaxial, 75 Ohms, 200 Degrees C, Type WL Product Standard-Ediiton P 2 |
|
AECMA PREN 4604-006 |
Aerospace Series Cable, Electrical, for Signal Transmission Part 006: Cable, Coaxial, 50 Ohms, 200 Degrees C, Type WM Product Standard-Edition P 2 |
|
AECMA PREN 4604-006 |
Aerospace Series Cable, Electrical, for Signal Transmission Part 007: Cable, Coaxial, 50 Ohms, 200 Degrees C, Type WN Product Standard-Ediiton P 1 |
|
AECMA PREN 4604-007 |
Aerospace series Cable, electrical, for signal transmission Part 007: Cable, coaxial, 50 Ohms, 200 Degrees C, type WN Product standard-Edition P 2 |
|
AECMA PREN 4608-001 |
Aerospace Series Cable, Electrical, Fire Resistant Single and Multicore Assembly, Screened (Braided) and Jacketed Operating Temperatures Between - 65 Degrees C and 260 Degrees C Part 001: Technical Specification-Edition P 1 |
|
AECMA PREN 4608-001 |
Aerospace Series Cable, Electrical, Fire Resistant Single and Multicore Assembly, Screened and Jacketed Part 001: Technical Specification-Edition D4 |
|
AECMA PREN 4608-002 |
Aerospace Series Cable, Electrical, Fire Resistant, Screened and Jacketed Operating Temperature between - 65 Degrees Celsius and 260 Degrees Celsius Part 002: General-Edition D3 |
|
AECMA PREN 4608-003 |
Aerospace series Cables, electrical, fire resistant Single and twisted multicore assembly, screened (braided) and jacketed Operating temperature between - 65 degrees celsius and 260 degrees celsius Part 003: DN family - lightweight - UV Laser printable Product standard-Edition P 1 |
|
AECMA PREN 4608-004 |
Aerospace series Cable, electrical, fire resistant Single and twisted multicore assembly, screened (braided) and jacketed Operating temperatures between - 65 degrees C and 260 degrees C Part 004: DW family - lightweight - UV Laser printable - Product standard-Edition P 1 |
|
AECMA PREN 4608-005 |
Aerospace series Cable, electrical, fire resistant Single and twisted multicore assembly, screened (braided) and jacketed Operating temperatures between - 65 degrees C and 260 degrees C Part 005: DW family - lightweight two-core gauge 24 for data transmission - UV Laser printable - Product standard-Edition P 1 |
|
AECMA PREN 4610 |
Aerospace Series Pipe coupling 80 degrees 30 inches in titanium alloy Elbows 45 degrees, with thrust wire nut-Edition P 1 |
|
AECMA PREN 4611-003 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembley XLETFE Family Part 003: Tin plated copper Operating temperatures, between - 65 Degrees Celsius and 135 Degrees Celsius Single extruded wall for enclosed applications UV laser printable Product standard-Edition P 1 |
|
AECMA PREN 4611-004 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family Part 004: Tin plated copper Operating temperatures, between - 65 Degrees Celsius and 135 Degrees Celsius Dual extruded wall for open applications UV laser printable Product standar-Edition P 1 |