|
AECMA PREN 4611-005 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family Part 005: Silver plated copper Operating temperatures, between - 65 Degrees Celsius and 150 Degrees Celsius Single extruded wall for enclosed applications UV laser printable Product standard-Edition P 1 |
|
AECMA PREN 4611-006 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family Part 006: Silver plated copper Operating temperatures, between - 65 Degrees Celsius and 150 Degrees Celsius Dual extruded wall for open applications UV laser printable Product standard-Edition P 1 |
|
AECMA PREN 4611-007 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family Part 007: Nickel plated copper Operating temperatures, between - 65 Degrees Celsius and 150 Degrees Celsius Dual extruded wall for open applications UV laser printable Product standard-Edition P 1 |
|
AECMA PREN 4611-009 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family Part 009: BJ - Nickel plated copper Operating temperatures, between - 65 Degrees Celsius and 150 Degrees Celsius Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination UV laser printable Product standard-Edition P 1 |
|
AECMA PREN 4612-002 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed Part 002: General-Edition P 1 |
|
AECMA PREN 4612-003 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed Part 003: Tin plated copper Operating temperatures, between - 65 Degrees Celsius and 135 Degrees Celsius Single extruded wall for open applications, with jacket without screen UV laser printable - Product standard-Edition P 1 |
|
AECMA PREN 4612-004 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed Part 004: Tin plated copper Operating temperatures, between - 65 Degrees Celsius and 135 Degrees Celsius Single extruded wall for open applications, with jacket without screen (braid) UV laser printable - Product standard-Edition P 1 |
|
AECMA PREN 4612-005 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed Part 005: Tin plated copper Operating temperatures, between - 65 Degrees Celsius and 135 Degrees Celsius Dual extruded wall for open applications, with jacket without screen UV laser printable - Product standard-Edition P 1 |
|
AECMA PREN 4612-006 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed Part 006: Tin plated copper Operating temperatures, between - 65 Degrees Celsius and 135 Degrees Celsius Dual extruded wall for open applications, with jacket and screen (braid) UV laser printable - Product standard-Edition P 1 |
|
AECMA PREN 4612-007 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed Part 007: Silver plated copper Operating temperatures, between - 65 Degrees Celsius and 150 Degrees Celsius Single extruded wall for open applications, with jacket without screen UV laser printable - Product standard-Edition P 1 |
|
AECMA PREN 4612-008 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed Part 008: Silver plated copper Operating temperatures, between - 65 Degrees Celsius and 150 Degrees Celsius Single extruded wall for open applications, with jacket and screen (braid) UV laser printable - Product standard-Edition P 1 |
|
AECMA PREN 4612-009 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed Part 009: Silver plated copper Operating temperatures, between - 65 Degrees Celsius and 150 Degrees Celsius Dual extruded wall for open applications, with jacket without screen UV laser printable - Product standard-Edition P 1 |
|
AECMA PREN 4612-010 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed Part 010: Silver plated copper Operating temperatures, between -65 Degrees C and 150 Degrees C Dual extruded wall for open applications, with jacket and screen (braid) UV laser printable-Product standard-Edition P 1 |
|
AECMA PREN 4612-011 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed Part 011: Nickel plated copper Operating temperatures, between -65 Degrees C and 150 Degrees C Dual Extruded wall for open applications, with jacket without screen UV laser printable-Product standard-Edition P 1 |
|
AECMA PREN 4612-012 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed Part 012: Nickel plated copper Operating temperatures, between -65 degrees C and 150 degrees C Dual extruded wall for open applications, with jacket and screen (braid) UV laser printable-Product standard-Edition P 1 |
|
AECMA PREN 4612-013 |
Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed Part 013: SX, TC and UC - Nickel plated copper Operating temperatures, between -65 Degrees C and 150 Degrees C Single extruded wall for equipment only, with jacket and screen (spiral) UV laser printable-Product standard-Edition P 1 |
|
AECMA PREN 4615 |
Aerospace series Magnesium alloy MG-C18002 T4 Sand casting-Edition P 1 |
|
AECMA PREN 4616 |
Aerospace series Magnesium alloy MG-C18002 T4 Chill casting-Edition P 1 |
|
AECMA PREN 4617 |
Aerospace series Recommended practices for standardising company standards-Edition P 1 |
|
AECMA PREN 4626-003 |
Aerospace series Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule Operating temperatures - 65 Degrees C to 125 Degrees C (cable dependent) Flush contacts Part 003: Adaptor for plug-Edition P 1 |
|
AECMA PREN 4626-004 |
Aerospace series Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule Operating temperatures - 65 Degrees C to 125 Degrees C (cable dependent) Flush contacts Part 004: Adaptor for receptacle-Edition P 1 |
|
AECMA PREN 4626-101 |
Aerospace series Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule Operating temperatures - 65 Degrees C to 125 Degrees C (cable dependent) Flush contacts Part 101: Optical contract (sub-assembly) for plug Product standard-Edition P 1 |
|
AECMA PREN 4626-202 |
Aerospace series Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule Operating temperatures - 65 Degrees C to 125 Degrees C (cable dependent) Flush contacts Part 202: Optical contract (sub-assembly) for 900 um buffered fibre receptacle Product standard-Edition P 1 |
|
AECMA PREN 4627 |
Aerospace series Steel FE-PM 3504 (X4CrNiMo16-5-1) Air melted Hardened and tempered Forgings De < or = to 150 mm 1 100 MPa < or = to Rm < or = to 1 300 MPa-Edition P 1 |
|
AECMA PREN 4628 |
Aerospace series Steel FE-PM 3504 (X4CrNiMo16-5-1) Air melted Hardened and tempered Forgings Bar De < or = to 150 mm 1 100 MPa < or = to Rm < or = to 1 300 MPa-Edition P 1 |
|
AECMA PREN 4629 |
Aerospace series Steel FE-PM 3504 (X4CrNiMo16-5-1) Air melted Hardened and tempered Forgings Stock De < or = to 300 mm-Edition P 1 |
|
AECMA PREN 4630 |
Aerospace series Steel FE-PM 3504 (X4CrNiMo16-5-1) Air melted Hardened and tempered Forgings De less than or equal to 200 mm 900 MPa less than or equal to Rm less than or equal to 1 050 MPa-Edition P 1 |
|
AECMA PREN 4631 |
Aerospace series Steel FE-PM 3504 (X4CrNiMo16-5-1) Air melted Hardened and tempered Bar De less than or equal to 200 mm 900 MPa less than or equal to Rm less than or equal to 1 050 MPa-Edition P 1 |
|
AECMA PREN 4632-001 |
Aerospace series Welded and brazed assemblies for aerospace constructions Weldability and brazeability of materials Part 001: General requirements-Edition P1 |
|
AECMA PREN 4632-002 |
Aerospace series Welded and brazed assemblies for aerospace constructions Weldability and brazeability of materials Part 002: Homogeneous assemblies aluminium and aluminium alloys-Edition P1 |
|
AECMA PREN 4639-001 |
Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 001: Technical specification-Edition P 1 |
|
AECMA PREN 4639-002 |
Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 002: List of product standards-Edition P 1 |
|
AECMA PREN 4639-003 |
Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 003: Male optical module Product standard-Edition P 1 |
|
AECMA PREN 4639-004 |
Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 004: Female optical module Product standard-Edition P 1 |
|
AECMA PREN 4639-005 |
Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 005: Removable alignment sleeve holder Product standard-Edition P 1 |
|
AECMA PREN 4639-101 |
Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 101 : Optical contact for cable EN 4641-100 Operating temperatures between – 65 degrees C and 125 degrees C Product standard-Edition P 1 |
|
AECMA PREN 4639-102 |
Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 102 : Optical contact for cable EN 4641-102 Operating temperatures between – 55 degrees C and 100 degrees C Product standard-Edition P 1 |
|
AECMA PREN 4640-001 |
Aerospace series Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 001: Technical specification-Edition P1 |
|
AECMA PREN 4640-002 |
Aerospace series Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 002: List of product standards-Edition P1 |
|
AECMA PREN 4640-003 |
Aerospace series Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 003: Plug optical connector Product standard-Edition P1 |
|
AECMA PREN 4640-004 |
Aerospace series Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 004: Receptacle optical connector Product standard-Edition P1 |
|
AECMA PREN 4700-1 |
Aerospace Series Steel and Heat Resisting Alloy Technical Specification Part 1: Plate, Sheet and Strip-Edition P1 |
|
AECMA PREN 4700-1 |
Aerospace Series Steel and Heat Resisting Alloy Wrought Products Technical Specification Part 1: Plate,Sheet and Strip-Edition P 1 |
|
AECMA PREN 4700-3 |
Aerospace Series Steel and Heat Resisting Alloys Wrought Products Technical Specification Part 3: Tube-Edition P1 |
|
AECMA PREN 4700-4 |
Aerospace Series Steel and Heat Resisting Alloys Wrought Products Technical Specification Part 4: Wire-Edition P1 |
|
AECMA PREN 4800-2 |
Aerospace Series Titanium and Titanium Alloys Technical Specification Part 2: Bar and Section-Edition P1 |
|
AECMA PREN 4800-4 |
Aerospace Series Titanium and Titanium Alloys Technical Specification Part 4: Wire-Edition P1 |
|
AECMA PREN 4800-4 |
Aerospace Series Titanium and Titanium Alloys Technical Specification Part 4: Wire-Edition P1 |
|
AECMA PREN 4800-5 |
Aerospace series Titanium and titanium alloys Technical specification Part 5: Forging stock-Edition P1 |
|
AECMA PREN 4800-5 |
Aerospace Series Titanium and Titanium Alloys Technical Specification Part 5: Forging Stock-Edition P1 |
|
AECMA PREN 4800-6 |
Aerospace series Titanium and titanium alloys Technical specification Part 6: Pre-production and production forgings-Edition P 1 |
|
AECMA PREN 4800-6 |
Aerospace Series Titanium and Titanium Alloys Technical Specification Part 6: Pre-Production and Production Forgings-Edition P1 |
|
AECMA PREN 4800-7 |
Aerospace series Titanium and titanium alloys Technical Specification Part 7: Remelting stock-Edition P 1 |
|
AECMA PREN 4800-7 |
Aerospace Series Titanium and Titanium Alloys Technical Specification Part 7: Remelting Stock-Edition P1 |
|
AECMA PREN 4800-8 |
Aerospace series Titanium and titanium alloys Technical specification Part 8: Pre-prodcution and production castings-Edition P 1 |
|
AECMA PREN 4800-8 |
Aerospace Series Titanium and Titanium Alloys Technical Specification Part 8: Pre-Prodcution and Production Castings-Edition P1 |
|
AECMA PREN 6018 |
Aerospace Series Test Methods for Metallic Materials Determination of Density According to Displacement Method-Issue P 1 |
|
AECMA PREN 6024 |
Aerospace Series Bolts, 100 Degrees Countersunk Reduced Head Offset Cruciform Recess, Close Tolerance Shank, Short Thread, Titanium Alloy, Lubricated Classification : 1100 MPa (at Ambient Temperature)/315 Degrees C Inch Series-Edition P 1 |
|
AECMA PREN 6024 |
Aerospace Series Screws, 100 Degrees Countersunk Reduced Head Offset Cruciform Recess, Close Tolerance Shank, Short Thread in Titanium Alloy, Anodized, MoS2 Lubricated Classification : 1 100 MPa (at Ambient Temperature)/315 Degrees C Inch Series-Edition P 3 |
|
AECMA PREN 6025 |
Aerospace Series Plates Close-Tolerance Flatness Aluminium Alloys-Issue P 1; Superseded by PREN 6025:1997 ED 2 |
|
AECMA PREN 6025 |
Aerospace Series Plates in Aluminium Alloys Close Tolerance Flatness Thickness 6 mm Less than a Less than or Equal to 160 mm Dimensions-Edition P 2 |
|
AECMA PREN 6030 |
Aerospace Series Fibre Reinforced Plastics Test Method Determination of the Mechanical Degradation Due to Chemical Paint Strippers-Edition P1 |
|
AECMA PREN 6036 |
Aerospace Series Fibre Reinforced Plastics Test Method Determination of Notched, Unnotched and Filled Hole Compression Strength-Edition P1 |
|
AECMA PREN 6037 |
Aerospace Series Fibre Reinforced Plastics Test Method Determination of Bearing Strength-Edition P1 |
|
AECMA PREN 6041 |
Aerospace Series Non-Metallic Materials Test Method Analysis of Non-Metallic Materials (Uncured) by Differential Scanning Calorimetry (DSC)-Edition P1 |
|
AECMA PREN 6044-1 |
Aerospace Series Carbon Fibre Reinforced Epoxy Prepreg Technical Specification Part 1: General Requirements-Edition P1 |
|
AECMA PREN 6044-2 |
Aerospace Series Carbon Fibre Reinforced Epoxy Prepreg Technical Specification Part 2 : Qualification Programm/Batch Release Testing Unidirectional Tape 180 Degrees Celsius Curing Class-Edition P1 |
|
AECMA PREN 6047-001 |
Aerospace Series Connectors, Electrical, Circular, Coupled by Threaded Ring, for High Current Operating Temperature + 200 Degrees Celsius Continuous, and Fire Resistant Part 001 - Technical Specification-Edition P1 |
|
AECMA PREN 6047-002 |
Aerospace Series Connectors, Electrical, Circular, Coupled by Threaded Ring, for High Current Operating Temperature + 200 Degrees Celsius Continuous, and Fire Resistant Part 002 - Specification of Performance and Contact Arrangements-Edition P1 |
|
AECMA PREN 6047-002 |
Aerospace Series Connectors, Electrical, Circular, Coupled by Threaded Ring, for High Current Operating Temperature + 200 Degrees Celsius Continuous, and Fire Resistant Part 002: Specification of Performance and Contact Arrangements-Edition P 2 |
|
AECMA PREN 6047-003 |
Aerospace Series Connectors, Electrical, Circular, Coupled by Threaded Ring, for High Current Operating Temperature + 200 Degrees Celsius Continuous, and Fire Resistant Part 003 - Square Flange Receptacle Product Standard-Edition P1 |
|
AECMA PREN 6047-003 |
Aerospace Series Connectors, Electrical, Circular, Coupled by Threaded Ring, for High Current Operating Temperature + 200 Degrees Celsius Continuous, and Fire Resistant Part 003: Square Flange Receptacle Product Standard-Edition P 2 |
|
AECMA PREN 6047-004 |
Aerospace Series Connectors, Electrical, Circular, Coupled by Threaded Ring, for High Current Operating Temperature + 200 Degrees Celsius Continuous, and Fire Resistant Part 004 - Plug Product Standard-Edition P1 |
|
AECMA PREN 6049-001 |
Aerospace Series Electrical Cables, Installation Protection Sleeve in Meta-Aramid Fibres Part 001: Technical Specification-Edition P 1 |
|
AECMA PREN 6049-001 |
Aerospace Series Electrical Cables, Installation Protection Sleeve in Meta-Aramid Fibres Part 001: Technical Specification-Edition P 2 |
|
AECMA PREN 6049-003 |
Aerospace Series Electrical Cables, Installation Protection Sleeve in Meta-Aramid Fibres Part 003: Braided, Tubular, Expandable Product Standard-Edition P 1 |
|
AECMA PREN 6049-004 |
Aerospace Series Electrical Cables, Installation Protection Sleeve in Meta-Aramid Fibres Part 004: Braided, Tubular, High Expandable Product Standard-Edition P 1 |
|
AECMA PREN 6049-005 |
Aerospace Series Electrical Cables, Installation Protection Sleeve in Meta-Aramid Fibres Part 005: Sleeve Flexible, Post Installation Product Standard-Edition P 1 |
|
AECMA PREN 6049-005 |
Aerospace Series Electrical Cables, Installation Protection Sleeve in Meta-Aramid Fibres Part 005: Sleeve Flexible, Post Installation Product Standard-Edition P 1 |
|
AECMA PREN 6049-005 |
Aerospace series Electrical cables, installation Protection sleeve in meta-aramid fibres Part 005: Sleeve flexible, post installation Product standard-Edition P 2 |
|
AECMA PREN 6049-006 |
Aerospace Series Electrical Cables, Installation Protection Sleeve in Meta-Aramid Fibres Part 006: Self-Wrapping Protective Sleeve, Flexible Post Installation Product Standard-Edition P 1 |
|
AECMA PREN 6049-006 |
Aerospace Series Electrical Cables, Installation Protection Sleeve in Meta-Aramid Fibres Part 006: Self-Wrapping Protective Sleeve, Flexible Post Installation Product Standard-Edition P 2 |
|
AECMA PREN 6049-006 |
Aerospace series Electrical cables, installation Protection sleeve in meta-aramid fibres Part 006: Self-wrapping protective sleeve, flexible post installation Product standard-Edition P 3 |
|
AECMA PREN 6052 |
Aerospace Series Rivets - Collar - System in Aluminium Alloy Shear Type Inch Series Technical Specification-Edition P 1 |
|
AECMA PREN 6054 |
Aerospace series Collars, swage locking, shear type, in aluminium alloy 6061, chemical film Inch series-Edition P 4 |
|
AECMA PREN 6059-100 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 100: General-Edition P 1 |
|
AECMA PREN 6059-100 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 100: General-Edition P 2 |
|
AECMA PREN 6059-201 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 201: Visual Inspection-Edition P 1 |
|
AECMA PREN 6059-202 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 202: Dimensions and Mass-Edition P 1 |
|
AECMA PREN 6059-203 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 203: Coverage-Edition P 1 |
|
AECMA PREN 6059-301 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 301: Sun Light Exposure-Edition P 1 |
|
AECMA PREN 6059-302 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 302: High Temperature Exposure-Edition P 1 |
|
AECMA PREN 6059-303 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 303: Resistance to Fluids-Edition P 1 |
|
AECMA PREN 6059-303 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 303: Resistance to Fluids-Edition P 2 |
|
AECMA PREN 6059-304 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 304: Flamability-Edition P 1 |
|
AECMA PREN 6059-306 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 306: Mould Growth-Edition P 1 |
|
AECMA PREN 6059-401 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 401: Expansion Range-Edition P 1 |
|
AECMA PREN 6059-402 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 402: Bending Properties-Edition P 1 |
|
AECMA PREN 6059-403 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 403: Scrape Abrasion-Edition P 1 |
|
AECMA PREN 6059-404 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 404: Tensile Strength-Edition P 1 |
|
AECMA PREN 6059-405 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 405: Dynamic Cut-Through-Edition P 1 |
|
AECMA PREN 6059-406 |
Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 406: Vibration-Edition P 1 |
|
AECMA PREN 6061 |
Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending-Edition P1 |
|
AECMA PREN 6063 |
Aerospace Series Fibre Reinforced Plastics Test Method Determination of Material Degradation Due to Chemical Products-Edition P1 |
|
AECMA PREN 6066 |
Aerospace Series Fibre Reinforced Plastics Test Method Determination of Tensile Strength of a Tapered and Stepped Joints-Edition P1 |
|
AECMA PREN 6067 |
Aerospace Series Pin, Quick Release, Self-Retaining, Positive Locking, Double Acting Button Handle-Edition P 1 |
|
AECMA PREN 6068 |
Aerospace Series Pin, Quick Release, Self-Retaining Positive Locking, Single Acting Button Handle-Edition P 1 |
|
AECMA PREN 6070 |
Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification General Requirements-Edition P 1 |
|
AECMA PREN 6071 |
Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Plate-Edition P 1 |
|
AECMA PREN 6073 |
Aerospace Series Metallic Materials Aluminium and Aluminium Alloys Test Methods Drop Test-Edition P 1 |
|
AECMA PREN 6074 |
Aerospace Series Metallic Materials Test Methods Statistical Data for Material Qualification-Edition P 1 |
|
AECMA PREN 6075 |
Aerospace series Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (-55 degrees C to 107 degrees C) Inch series-Edition P 1 |
|
AECMA PREN 6076 |
Aerospace series Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (-55 degrees C to 107 degrees C) Inch series-Edition P 1 |
|
AECMA PREN 6080 |
Aerospace Series Rivet, 100 Degree Normal Flush Head, Close Tolerance Inch Series-Edition P 1;:2005 Edition P 3 |
|
AECMA PREN 6080 |
Aerospace Series Rivet, 100 Degrees Normal Flush Head, Close Tolerance Inch Series-Edition P 3;:2001 Edition P 1 |
|
AECMA PREN 6081 |
Aerospace Series Rivet Universal Head Inch Based Series-Edition P 1;:2005 Edition P 2 |
|
AECMA PREN 6084 |
Aerospace Series Non-Metallic Materials Surfacing Films Technical Specification General Requirements-Edition P1 |
|
AECMA PREN 6085 |
Aerospace Series Non-Metallic Materials Epoxy Surfacing Films-Edition P1 |
|
AECMA PREN 6086 |
Aerospace series Static seal elements square ring ethylene-propylene, moulded, phosphate ester resistant (-55 degrees C to 107 degrees C) Inch series-Edition P 1 |
|
AECMA PREN 6090 |
Aerospace series Washer, retaining-Edition P 1 |
|
AECMA PREN 6095 |
Aerospace series Rotary fasteners Structural and non-structural applications Technical specification-Edition P 1 |
|
AECMA PREN 6101 |
Aerospace Series Rivet, 100 Degrees Medium Flush Head, Close Tolerance Inch Series-Edition P 1;:2005 Edition P 2 |
|
AECMA PREN 6101 |
Aerospace Series Rivet, 100 Degrees Medium Flush Head, Close Tolerance Inch Series-Edition P 2;:2001 Edition P 1 |
|
AECMA PREN 6104 |
Aerospace Series Rivets, Solid, in Aluminium or Aluminium Alloy Inch Series Technical Specification-Edition P 1 |
|
AECMA PREN 6111 |
Aerospace series Ethylene-propylene elastomer (EPM/EPDM) Hardness 80 IRHD for static seal elements in hydraulic systems for long-term application Material standard-Edition P 1 |
|
AECMA PREN 6113 |
Aerospace Series Circuit breaker, connecting and attachment hardware-Edition P 1 |
|
AECMA PREN 6118 |
Aerospace series Process specification Aluminium base protection for fasteners-Edition P 1 |
|
AECMA PREN 6126 |
Aerospace series Fitting end, 24 degrees internal cone, external thread, flareless type, size - 32 Tube diameter D = 2 inches (D = 50, 8mm) Extra fine thread pitch Inch series Design standard-Edition P 1 |
|
AECMA PREN 6127 |
Aerospace series Blind bolt, 100 degrees reduced flush head, high strength-Edition P 2 |
|
AECMA PREN 6129 |
Aerospace series Blind bolt, Protruding head, high strength-Edition P 1 |
|
AECMA PREN 6131 |
Aerospace series Composite clip nut, self-locking-Edition P 2 |
|
AECMA PREN 7000-1 |
(CANCELLED) Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 1: General Rules-Edition P 1 |
|
AECMA PREN 7000-10 |
(CANCELLED) Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 10: Reinforcement Fibres-Edition P 1 |
|
AECMA PREN 7000-10 |
(CANCELLED) Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 10: Reinforcement Fibres-Edition P 1; Replaced by TR 7000-10 |
|
AECMA PREN 7000-11 |
Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 11: Preimpregnates-Edition P 1 |
|
AECMA PREN 7000-12 |
Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 12: Woven Fabrics |
|
AECMA PREN 7000-2 |
Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 2 : Rubbers |
|
AECMA PREN 7000-6 |
(CANCELLED) Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 6: Structural Adhesive Systems-Edition P 2; Replaced by TR 7000-6 |
|
AECMA PREN 7000-7 |
Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 7: Anaerobic Polymerisable Compounds |
|
AECMA PREN 7000-9 |
(CANCELLED) Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 9: Paints and Varnishes-Edition P 1 |
|
AECMA PREN 7000-9 |
(CANCELLED) Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 9: Paints and Varnishes-Edition P 2; Replaced by TR 7000-9 |
|
AECMA PREN 7001 |
Aerospace Series Process Standards Rules for the Drafting and Presentation of Surface Treatment Standards-Edition P 1 |
|
AECMA PREN 9000-3 |
Aerospace Series Aerospace Industry Quality System Part 3: Requirements Applicable to Stockists-Distributors-Edition P 1; Replaced by PREN 9120 |
|
AECMA PREN 9000-3 |
Aerospace Series Aerospace Industry Quality System Part 3: Requirements for Stockists-Distributors-Edition P 1 |
|
AECMA PREN 9110 |
Aerospace Series Quality Systems Model for Quality Assurance Applicable to Maintenance Organizations-Edition P 1; Supersedes PREN 9000-2, Edition P 2 |
|
AECMA PREN 9111 |
Aerospace Series Quality Systems Quality System Assessment Applicable to Maintenance Organizations-Edition P 1 |
|
AECMA PREN 9111 |
Aerospace series Quality systems Quality system assessment applicable to maintenance organizations-Edition P 2 |
|
AECMA PREN 9121 |
Aerospace series Quality management systems Assessment applicable to stockist distributors and Quality systems Quality system assessment applicable to stocklist distributors-Edition P 2; Based on ISO 9001:2000 and ISO 9001:1994 |
|
AECMA PREN 9300-001 |
Aerospace series Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data within the aerospace industry “AECMA-STAN LOTAR†PART 001: Structure |
|
AECMA PREN 9300-002 |
Aerospace series Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data within the aerospace industry “AECMA-STAN LOTAR†PART 002: Requirements |
|
AECMA PREN 9300-004 |
Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 004: Description Methods-Edition P 1 |
|
AECMA PREN 9300-010 |
Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 010: Overview Data Flow-Edition P 1 |
|
AECMA PREN 9300-011 |
Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 011: Reference process description |
|
AECMA PREN 9300-012 |
Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 012: Reference process description ''Ingest''-Edition P 1 |
|
AECMA PREN 9300-014 |
Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 014: Reference process description ''Retrieval''-Edition P 1 |
|
AECMA PREN 9300-015 |
Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 015: Reference process description ''Removal''-Edition P 1 |
|
AECMA PREN2134 |
Round Aluminium Alloy Bars - Extruded - Dimensions (C6/A03-02) |
|
AECMA TR 2674 |
Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition Rigid Lines, Installation-Edition 1 |
|
AECMA TR 2678 |
Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition Design of Rigid Lines-Edition 1 |
|
AECMA TR 3198 |
Aerospace Series Manufacturers' Identification Monograms and Marks for EN Aerospace Products-Edition 7 |
|
AECMA TR 3634 |
Aerospace Series Fluid Fittings, Flanged Assembly Recommendations-Edition 1 |
|
AECMA TR 3775 |
Aerospace Series Bolts and Pins National Materials-Edition 3 |
|
AECMA TR 3900 |
Aerospace Series Metallic Materials Relationship Between AECMA Designation Systems-Edition 1 |
|
AECMA TR 3970 |
Aerospace Series Designation Codes for Semi-Finished Metallic Products-Edition 1 |
|
AECMA TR 4052 |
Aerospace Series Pipe Couplings, 60 Degrees, Spherical, in Titanium Alloy Assembly Recommendations-Edition 1 |
|
AECMA TR 4053 |
Aerospace Series Pipe Couplings, Loose Flanges and Seals in Titanium Alloy Assembly Recommendations-Edition 1 |
|
AECMA TR 4169 |
Aerospace Series Clips, Spring Tension, Three Parts Assembly Recommendations-Edition 1 |
|
AECMA TR 4239 |
Aerospace Series Shaft Nuts and Rings Threaded, Self-Locking, in FE-PA92HT (A286), Silver Plated Assembly Recommendations |
|
AECMA TR 4386 |
Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Test Method Standards-Edition P 1 |
|
AECMA TR 4475 |
Aerospace Series Bearings and Mechanical Transmissions for Airframe Applications Vocabulary-Edition 1 |
|
AECMA TR 4586 |
Aerospace Series Clips, Spring Tension Design Recommendations-Edition 1 |
|
AECMA TR 4587 |
Aerospace Series Clips, Spring Tension Assembly Recommendations-Edition 1 |
|
AECMA TR 7000-1 |
Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 1: General Rules-Edition 1; Supersedes prEN 7000-1 Edition P1 September 1998 |
|
AECMA TR 7000-10 |
Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 10: Reinforcement Fibres-Edition 1; Supersedes prEN 7000-10 Edition P1 September 1998 |
|
AECMA TR 7000-12 |
Aerospace series Non-metallic materials Rules for the drafting and presentation of material standards Part 12: Woven fabrics-Edition P 1 |
|
AECMA TR 7000-2 |
Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 2: Rubbers-Edition 1 |
|
AECMA TR 7000-3 |
Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 3: Sealants-Edition 1 |
|
AECMA TR 7000-4 |
Aerospace series Non-metallic materials Rules for the drafting and presentation of material standards Part 4: Plastic transparencies-Edition 1 |
|
AECMA TR 7000-5 |
Aerospace series Non-metallic materials Rules for the drafting and presentation of material standards Part 5: Glass transparencies-Edition 1 |
|
AECMA TR 7000-6 |
Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 6: Structural Adhesive Systems-Edition 1 |
|
AECMA TR 7000-7 |
Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Material Standards Part 7: Anaerobic Polymerisable Compounds-Edition 1 |