|
AECMA PREN 2345 |
Aerospace Series Aluminium and Aluminium Alloy Rivets Technical Specification-Replaced By PREN 2345-1; Edition 2 |
|
AECMA PREN 2345 |
Aerospace Series Aluminium and Aluminium Alloy Solid Rivets Inch Based Series Technical Specification-Edition 2 |
|
AECMA PREN 2345-1 |
Aerospace Series Rivets, Solid, in Aluminium or Aluminium Alloy, Inch Based Series Technical Specification-Edition P 1 |
|
AECMA PREN 2345-2 |
Aerospace Series Rivets, Solid, in Aluminium or Aluminium Alloy, Metric Series Technical Specification-Edition P 1 |
|
AECMA PREN 2345-2 |
Aerospace Series Rivets, Solid, in Aluminium or Aluminium Alloy, Metric Series Technical Specification-Edition P 2 |
|
AECMA PREN 2346 |
Aerospace Series Fire Resistant Electrical Cables Dimensions, Conductor Resistance and Mass-Issue P 1 |
|
AECMA PREN 2346-002 |
Aerospace Series Cable, Electrical, Fire Resistant Operating Temperatures between -65 Degrees C and 260 Degrees C Part 002: General-Issue P 1 |
|
AECMA PREN 2346-002 |
Aerospace Series Cable, Electrical, Fire Resistant Operating Temperatures between -65 Degrees C and 260 Degrees C Part 002: General-Issue P 2 |
|
AECMA PREN 2346-002 |
Aerospace Series Cable, Electrical, Fire Resistant Part 002: List and Code of Product Standards-Supersedes 3E: 08/96 |
|
AECMA PREN 2346-003 |
Aerospace Series Cable, Electrical, Fire Resistant Operating Temperatures between -65 Degrees C and 260 Degrees C Part 003: DL Family, Single Core Product Standard-Issue P 1 |
|
AECMA PREN 2346-003 |
Aerospace Series Cable, Electrical, Fire Resistant Part 003: Standard Version Product Standard-Supersedes 3E: 08/96 |
|
AECMA PREN 2346-004 |
Aerospace Series Cable, Electrical, Fire Resistant Operating Temperatures between -65 Degrees C and 260 Degrees C Part 004: DN Family, Single UV Laser Printable and Multicore Assembly Light Weight Product Standard-Issue P 1 |
|
AECMA PREN 2346-004 |
Aerospace Series Cables, Electrical, Fire Resistant Part 004: Lightweight Version Product Standard-Supersedes 3E: 08/96 |
|
AECMA PREN 2346-005 |
Aerospace series Cable, electrical, fire resistant Operating temperatures between - 65 degrees C and 260 degrees C Part 005: DW family, single UV laser printable and multicore assemble Light weight Product standard-Edition P 1 |
|
AECMA PREN 2347 |
Aerospace Series Flexible Hose Assemblies in Polytetrafluoroethylene (PTFE) - Type 4 - Technical Specification-Edition P 1 |
|
AECMA PREN 2347 |
Aerospace Series Flexible Hose Assemblies in Polytetrafluoroethylene (PTFE) - Type 4 - Technical Specification-Edition P 1; Corrigendum 02/28/1997 |
|
AECMA PREN 2347 |
Aerospace Series Flexible Hose Assemblies in Polytetrafluoroethylene (PTFE) - Type 4 - Technical Specification-Edition P 1; Corrigendum 2: 07/02/1998 |
|
AECMA PREN 2349 |
Aerospace Series Requirements and Test Procedures for Switching Devices-Edition P 1 |
|
AECMA PREN 2349-201 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 201: Visual Inspection-Edition P 1 |
|
AECMA PREN 2349-302 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 302: Insulation Resistance-Edition P 1 |
|
AECMA PREN 2349-304 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 304: Operate and Release Time-Edition P 1 |
|
AECMA PREN 2349-305 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 305: Bounce Time-Edition P 1 |
|
AECMA PREN 2349-306 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 306: Overload D.C. and A.C.-Edition P 1 |
|
AECMA PREN 2349-308 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 308: Coil Current-Edition P 1 |
|
AECMA PREN 2349-309 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 309: Exported Spikes-Edition P 1 |
|
AECMA PREN 2349-310 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 310: Rupture-Edition P 1 |
|
AECMA PREN 2349-312 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 312: Electrical Service Life - Mixed Load-Edition P 1 |
|
AECMA PREN 2349-313 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 313: Electrical Service Life - Resistive Load-Edition 3E |
|
AECMA PREN 2349-314 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 314: Electrical Service Life - Inductive Load-Edition 3E |
|
AECMA PREN 2349-315 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 315: Electrical Service Life - Lamp Load-Edition 3E |
|
AECMA PREN 2349-316 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 316: Mechanical Life (Endurance at Reduced Load)-Edition 3E |
|
AECMA PREN 2349-316 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 316: Mechanical Life (Endurance at Reduced Load)-Edition P 1 |
|
AECMA PREN 2349-317 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 317: Service Life of Coil Switching Device-Edition 3E |
|
AECMA PREN 2349-317 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 317: Service Life of Coil Switching Device-Edition P 1 |
|
AECMA PREN 2349-318 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 318: Pick-Up Voltage at High Temperature and Drop-Out Voltage at Low Temperature-Edition 3E |
|
AECMA PREN 2349-318 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 318: Pick-Up Voltage at High Temperature and Drop-Out Voltage at Low Temperature-Edition P 1 |
|
AECMA PREN 2349-319 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 319: Miss Test-Edition 3E |
|
AECMA PREN 2349-319 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 319: Miss Test-Edition P 1 |
|
AECMA PREN 2349-402 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 402: Corrosion, Salt Spray-Edition 2E |
|
AECMA PREN 2349-402 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 402: Corrosion, Salt Spray-Edition P 1 |
|
AECMA PREN 2349-405 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 405: Fluid Resistance-Edition 2E |
|
AECMA PREN 2349-405 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 405: Fluid Resistance-Edition P 1 |
|
AECMA PREN 2349-407 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 407: Cold/Low Pressure and Moist Heat-Edition 2E |
|
AECMA PREN 2349-407 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 407: Cold/Low Pressure and Moist Heat-Edition P 1 |
|
AECMA PREN 2349-410 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 410: Mould-Edition 2E; Superseding PREN 2349 |
|
AECMA PREN 2349-410 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 410: Mould-Edition P 1 |
|
AECMA PREN 2349-411 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 411: Temperature Change-Edition 2E |
|
AECMA PREN 2349-411 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 411: Temperature Change-Edition P 1 |
|
AECMA PREN 2349-412 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 412: Seal-Edition 2E |
|
AECMA PREN 2349-412 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 412: Seal-Edition P 1 |
|
AECMA PREN 2349-413 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 413: Vibration, Sinusoidal and Random-Edition 2E |
|
AECMA PREN 2349-414 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 414: Mechanical Shock-Edition 2E |
|
AECMA PREN 2349-414 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 414: Mechanical Shock-Edition P 1 |
|
AECMA PREN 2349-415 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 415: Acceleration-Edition 2E |
|
AECMA PREN 2349-415 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 415: Acceleration-Edition P 1 |
|
AECMA PREN 2349-601 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 601: Compass Safety Distance-Edition 2E |
|
AECMA PREN 2349-601 |
Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 601: Compass Safety Distance-Edition P 1 |
|
AECMA PREN 2353 |
Aerospace Series Turnbarrels, Control Cable in Corrosion Resisting Steel Dimensions and Loads-Edition 1 |
|
AECMA PREN 2354 |
Aerospace Series Eye-Ends, Threaded, Control Cable in Corrosion Resisting Steel Dimensions and Loads-Edition 1 |
|
AECMA PREN 2355 |
Aerospace Series Fork-Ends, Threaded, Control Cable in Corrosion Resisting Steel Dimensions and Loads-Edition 2 |
|
AECMA PREN 2356 |
Aerospace Series Fork-Ends Threaded, Control Cable for Rolling Bearings in Corrosion Resisting Steel Dimensions and Loads-Edition 2 |
|
AECMA PREN 2357 |
Aerospace Series Stud-Ends in Corrosion Resisting Steel Swaged on Type, Control Cable Dimensions and Loads-Edition 2 |
|
AECMA PREN 2359 |
Aerospace Series Fork-Ends in Corrosion Resisting Steel Swaged on Type, Control Cable Dimensions and Loads-Edition 1 |
|
AECMA PREN 2360 |
Aerospace Series Fork-Ends for Rolling Bearings in Corrosion Resisting Steel Swaged on Type, Control Cable Dimensions and Loads-Edition 1 |
|
AECMA PREN 2361 |
Aerospace Series Ball-Ends, Double Shank in Corrosion Resisting Steel Swaged on Type, Control Cable Dimensions and Loads-Edition 1 |
|
AECMA PREN 2362 |
Aerospace Series Ball-Ends in Corrosion Resisting Steel Swaged on Type, Control Cable Dimensions and Loads-Edition 1 |
|
AECMA PREN 2363 |
Locking Clips for Turnbuckles of Control Cables Dimensions Aerospace Series-Edition 1 |
|
AECMA PREN 2366 |
Sheets and Strips Heat Resisting Alloys Cold Rolled Thickness a Less Than or Equal to 3 mm Dimensions Aerospace Series-Edition 1 |
|
AECMA PREN 2368 |
Aerospace Series Round Bars, Heat Resisting Alloys Machined Diameter 10 mm Less than or Equal to D Less than or Equal to 180 mm Dimensions-Edition 2 |
|
AECMA PREN 2368 |
Aerospace Series Round Bars, Heat Resisting Alloys Machined Diameter 10 mm Less than or Equal to D Less than or Equal to 180 mm Dimensions-Edition 3; PREN 2344 |
|
AECMA PREN 2370 |
Nuts, Hexagon, Steel, Cadmium Plated Classification: 1 100 MPa/235 Degrees Celsius Aerospace Series-Inactive for New Design; See PREN 3226; Edition 2 |
|
AECMA PREN 2371 |
Nuts, Hexagon, Steel, Cadmium Plated, Left Hand Thread Classification: 1 100 MPa/235 Degrees Celsius Aerospace Series-Inactive for New Design; See PREN 3227; Edition 2 |
|
AECMA PREN 2373 |
Nuts, Hexagon, Thin, Steel, Cadmium Plated, Left Hand Thread Classification: 1 100 MPa/235 Degrees Celsius Aerospace Series-Inactive for New Design; See Pren 3229; Edition 2 |
|
AECMA PREN 2375 |
Aerospace Series Resin Preimpregnated Materials Production Batch Sampling Procedure-Edition 1 |
|
AECMA PREN 2379 |
Aerospace Series Fluids for Assessment of Non-Metallic Materials-Edition P 1 |
|
AECMA PREN 2381 |
Aluminium Alloy 7009-T73652 Hand Forgings a Less Than or Equal to 150 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2382 |
Aerospace Series Aluminium Alloy AL-P2214-T6 Hand and Die Forgings a Less Than or Equal to 100 mm-Edition P 1 |
|
AECMA PREN 2382 |
Aluminium Alloy 2214-T6 Forgings a Less Than or Equal to 100 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2382 |
Aluminium Alloy 2214-T6 Forgings a Less Than or Equal to 100 mm Aerospace Series-Edition 2 |
|
AECMA PREN 2383 |
Aerospace Series Aluminium Alloy AL-P2214-T4 Hand and Die Forgings a Less Than or Equal to 100 mm-Edition P 1 |
|
AECMA PREN 2383 |
Aluminium Alloy 2214-T4 Forgings a Less Than or Equal to 100 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2383 |
Aluminium Alloy 2214-T4 Forgings a Less Than or Equal to 100 mm Aerospace Series-Edition 2 |
|
AECMA PREN 2384 |
Aluminium Alloy 2014A-T6511 Bars and Sections a Less Than or Equal to 150 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2385 |
Aluminum Alloy 7009-T73651 Bars and Sections a Less Than or Equal to 125 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2386 |
Aerospace Series Aluminium Alloy AL-P7075-T7352 Hand Forgings a Less Than or Equal to 150 mm-Edition P 1 |
|
AECMA PREN 2386 |
Aluminium Alloy 7075-T7352 Hand Forgings a Less Than or Equal to 150 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2389 |
Aluminium Alloy 6082-T4 Tubes for Structures 0,6 mm Less Than or Equal to a Less Than or Equal to 12,5 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2390 |
Aluminium Alloy 6082-T6 Tubes for Structures 0,6 mm Less Than or Equal to a Less Than or Equal to 12,5 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2393 |
Aerospace Series Aluminium Alloy 2017A-T4 Drawn Tube for Structures 0,6 Less Than or Equal to a Less Than or Equal to 12,5 mm-Edition 2 |
|
AECMA PREN 2394 |
Aluminium Alloy 7075-T6511 Bars and Sections A Less Than or Equal to 125 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2396 |
Heat Resisting Nickel Base Alloy NI-P95-HT Cold Worked, Solution Treated and Precipitation Treated Bars for Machined Bolts D Less Than or Equal to 25 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2397 |
Heat Resisting Nickel Base Alloy NI-P95-HT Cold Worked, Solution Treated and Precipitation Treated Bars for Forged bolts D Less Than or Equal to 25 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2398 |
Aerospace Series Heat Resisting Alloy FE-PA2601 Softened, Cold Worked, Solution Treated, Precipitation Treated Bars for Machined Fastners D Less Than or Equal to 50 mm 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa-Edition P2 |
|
AECMA PREN 2398 |
Heat Resisting Steel FE-PA92-HT Rm Greater Than or Equal to 900 MPa Bars for Machined Bolts D Less Than or Equal to 25 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2400 |
Heat Resisting Nickel Base Alloy NI-P96-HT Cold Drawn and Precipitation Treated Wires D Less Than or Equal to 10 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2401 |
Heat Resisting Nickel Base Alloy NI-P96-HT Solution Treated and Precipitation Treated Wires D Less Than or Equal to 10 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2402 |
Heat Resisting Nickel Base Alloy NI-P91-HT Annealed Wires D Less Than or Equal to 10 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2403 |
Aerospace Series Heat Resisting Alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) Vacuum Melted Solution Treated and Precipitation Treated Precision Casting a or D Less Than or Equal to 50 mm-Edition P 1 |
|
AECMA PREN 2403 |
Heat Resisting Nickel Base Alloy NI-C100-HT Solution Treated and Precipitation Treated Precision Castings Aerospace Series-Edition 2;Inactive for New Design See PREN 2403 Edition P 1 |
|
AECMA PREN 2404 |
Heat Resisting Nickel Base Alloy NI-P100-HT Solution Treated and Precipitation Treated Bars Aerospace Series-Edition 1 |
|
AECMA PREN 2404 |
Heat Resisting Nickel Base Alloy NI-P100-HT Solution Treated and Precipitation Treated Bars Aerospace Series-Edition 2; Supersedes Edition 1: May 1980; Inactive for New Design See Pren 4376 and 4377 |
|
AECMA PREN 2405 |
Aerospace Series Heat Resisting Alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) Solution and Precipitation Treated Forgings De Less Than or Equal to 200 mm-Edition EN |
|
AECMA PREN 2405 |
Aerospace Series Heat Resisting Alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) Solution Treated and Precipitation Treated Forgings De Less Than or Equal to 200 mm-Edition P 1 |
|
AECMA PREN 2405 |
Heat Resisting Nickel Base Alloy NI-P100-HT Solution Treated and Precipitation Treated Forgings Aerospace Series-Edition 2; Inactive for New Design See PREN 2405 Edition P 1 |
|
AECMA PREN 2406 |
Heat Resisting Nickel Base Alloy NI-P101-HT Solution Treated and Precipitation Treated Bars for Forged Bolts D Less Than or Equal to 25 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2407 |
Aerospace Series Heat Resisting Alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) Solution and Precipitation Treated Sheet, Strip and Plate 0,2 mm Less Than or Equal to a Less Than or Equal to 10 mm-Edition EN |
|
AECMA PREN 2407 |
Aerospace Series Heat Resisting Alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) Solution Treated and Precipitation Treated Sheet, Strip and Plate 0,2 mm Less Than or Equal to a Less Than or Equal to 10 mm-Edition P 1 |
|
AECMA PREN 2407 |
Heat Resisting Nickel Base Alloy NI-P100-HT Solution Treated and Precipitation Treated Sheets and Strips a Less Than or Equal to 3 mm Aerospace Series-Edition 2; Inactive for New Design See PREN 2407 Edition P 1 |
|
AECMA PREN 2408 |
Heat Resisting Nickel Base Alloy NI-P100-HT Solution Treated and Precipitation Treated Plates a Greater Than 3 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2411 |
Heat Resisting Nickel Base Alloy NI-P91-HT Annealed Plates a Greater Than 3 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2413 |
Aerospace Series Bolts, Thin Hexagonal Head, Close Tolerance Shank, Short Thread, in Alloy Steel, Cadmium Plated Classification : 1 100 MPa (at Ambient Temperature)/235 Degrees C-Edition P 2 |
|
AECMA PREN 2416 |
Aerospace Series Heat Resisting Alloy FE-PA4901 Solution Treated and Descaled Sheet and Plate 3 mm Less Than a Less Than or Equal to 50 mm-Edition EN |
|
AECMA PREN 2416 |
Heat Resisting Steel FE-PA91-HT Solution Treated Plates a Greater than 3 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2416 |
Heat Resisting Steel FE-PA91-HT Solution Treated Plates a More Than 3 mm Aerospace Series-Edition 2; Inactive for New Design See prEN 4575 Edition P1 |
|
AECMA PREN 2417 |
Heat Resisting Steel FE-PA93-HT Solution Treated and Precipitation Treated Plates a Greater Than 3 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2417 |
Heat Resisting Steel FE-PA93-HT Solution Treated and Precipitation Treated Plates a Greater Than 3 mm Aerospace Series-Edition 2; Supersedes Edition 1: May 1980; Inactive for New Design See Pren 2175 |
|
AECMA PREN 2418 |
Heat Resisting Nickel Base Alloy NI-P105-HT Solution Treated and Precipitation Treated Plates a Greater Than 3 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2419 |
Aerospace Series Aluminium Alloy AL-P2024-T351 Plate 6 mm Less Than a Less Than or Equal to 80 mm-Edition P 12 |
|
AECMA PREN 2422 |
Aerospace Series Aluminium Alloy AL-P2124-T351 Plate 25 mm Less Than a Less Than or Equal to 120 mm-Edition P 1 |
|
AECMA PREN 2422 |
Aerospace Series Aluminium Alloy AL-P2124-T351 Plate 25 mm Less Than a Less Than or Equal to 120 mm-Edition P1 |
|
AECMA PREN 2422 |
Aluminium Alloy 2124-T351 Plates 25 mm and Less Than a Less Than or Equal to 120 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2429 |
Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 60 IRHD-Edition 1 |
|
AECMA PREN 2430 |
Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 70 IRHD-Edition 1 |
|
AECMA PREN 2432 |
Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 90 IRHD-Edition 1 |
|
AECMA PREN 2434-02 |
Aerospace Series Paints and Varnishes Two Component Cold Curing Polyurethane Finish Part 02: High Chemical Resistance-Edition P 1 |
|
AECMA PREN 2434-03 |
Aerospace Series Paints and Varnishes Two Component Cold Curing Polyurethane Finish Part 03: Flexible and High Fluid Resistance for Interior-Edition P 1 |
|
AECMA PREN 2434-03 |
Aerospace Series Paints and Varnishes Two Component Cold Curing Polyurethane Finish Part 3: Flexible and High Fluid Resistance for Interior |
|
AECMA PREN 2434-04 |
Aerospace Series Paints and Varnishes Two Component Cold Curing Polyurethane Finish Part 04: High Flexibility-Edition P 1 |
|
AECMA PREN 2435-0 |
Aerospace Series Corrosion Resistant , Two-Component, Cold Curing Primer |
|
AECMA PREN 2435-01 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromated Two Component Cold Curing Primer Part 01 : Minimum Requirements-Edition P 1 |
|
AECMA PREN 2435-02 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromated Two Component Cold Curing Primer Part 02: High Corrosion Resistance-Edition P 1 |
|
AECMA PREN 2435-03 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromated Two Component Cold Curing Primer Part 03: High Corrosion and Fluid Resistance-Edition P 1 |
|
AECMA PREN 2435-04 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromated Two Component Cold Curing Primer Part 04: High Corrosion and Fluid Resistance with Surface Preparation Tolerance-Edition P 1 |
|
AECMA PREN 2435-05 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromated Two Component Cold Curing Epoxy Primer Part 05: High Corrosion Resistance for Military Application-Edition P 1 |
|
AECMA PREN 2435-05 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromated Two Component Cold Curing Primer Part 5: High Corrosion Resistance for Military Application |
|
AECMA PREN 2436-01 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromate-Free Two Component Cold Curing Primer Part 01: Basic Requirements-Edition P 1 |
|
AECMA PREN 2436-02 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromate-Free Two Component Cold Curing Primer Part 02: High Corrosion Resistance-Edition P 1 |
|
AECMA PREN 2436-03 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromate-Free Two Component Cold Curing Primer Part 03: High Corrosion and Fluid Resistance-Edition P 1 |
|
AECMA PREN 2436-04 |
Aerospace Series Paints and Varnishes Corrosion Resistant Chromate-Free Two Component Cold Curing Primer Part 04: High Corrosion and Fluid Resistance with Surface Preparation Tolerance-Edition P 1 |
|
AECMA PREN 2436-06 |
Aerospace series Paints and varnishes Corrosion resistant chromate free two component cold curing primer Part 6: High corrosion resistance for military application |
|
AECMA PREN 2439 |
Steel FE-PL62 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Forgings De Less Than or Equal to 40 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2440 |
Steel FE-PL711 1250 MPa Less Than or Equal to Rm Less Than or Equal to 1450 MPa Bars and Wires De Less Than or Equal to 16 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2441 |
Steel FE-PL711 1250 MPa Less Than or Equal to Rm Less Than or Equal to 1450 MPa Forgings De Less Than or Equal to 16 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2442 |
Steel FE-PL711 1100 MPa Less Than or Equal to Rm Less Than or Equal to 1300 MPa Bars and Wires De Less Than or Equal to 25 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2443 |
Steel FE-PL711 1100 MPa Less Than or Equal to Rm Less Than or Equal to 1300 MPa Forgings De Less Than or Equal to 25 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2444 |
Steel FE-PL711 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Bars and Wires De Less Than or Equal to 45 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2445 |
Aerospace Series Steel FE-PL8201 (41NiCrMo2) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 45 mm 900 MPa Less Than or Equal to Rm Less Than or Equal to 1 100 MPa-Edition 2 |
|
AECMA PREN 2445 |
Aerospace Series Steel FE-PL8201 (41NiCrMo2) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 45 mm 900 MPa Less Than or Equal to Rm Less Than or Equal to 1 100 MPa-Edition P 1 |
|
AECMA PREN 2445 |
Steel FE-PL711 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Forgings De Less Than or Equal to 45 mm Aerospace Series-Edition 2; Inactive for New Design See PREN 2445 Edition P 1 |
|
AECMA PREN 2446 |
Steel FE-PL45 1100 MPa Less Than or Equal to Rm Less Than or Equal to 1300 MPa Bars De Less Than or Equal to 25 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2447 |
Steel FE-PL45 1100 MPa Less Than or Equal to Rm Less Than or Equal to 1300 MPa Forgings De Less Than or Equal to 25 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2448 |
Steel FE-PL45 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Bars De Less Than or Equal to 40 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2449 |
Steel FE-PL45 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Forgings De Less Than or Equal to 40 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2450 |
Steel FE-PL73 1230 MPa Less Than or Equal to Rm Less Than or Equal to 1420 MPa Bars De Less Than or Equal to 40 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2452 |
Steel FE-PL43S Annealed Bar and Wire Dm Less Than or Equal to 40 mm for Prevailing Torque Nuts |
|
AECMA PREN 2452 |
Steel FE-PL73 1080 MPa Less Than or Equal to Rm Less Than or Equal to 1280 MPa Bars De Less Than or Equal to 150 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2453 |
Steel FE-PL43S Annealed Sheet and Strip 0,3 Less Than or Equal to a Less Than or Equal to 2 mm for Prevailing Torque Nuts |
|
AECMA PREN 2454 |
Steel FE-PL73 880 MPa Less Than or Equal to Rm Less Than or Equal to 1080 MPa Bars De Less Than or Equal to 150 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2456 |
Steel FE-PL48 1050 MPa Less Than or Equal to Rm Less Than or Equal to 1250 MPa Bars De Less Than or Equal to 40 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2457 |
Steel FE-PL48 1050 MPa Less Than or Equal to Rm Less Than or Equal to 1250 MPa Forgings De Less Than or Equal to 40 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2458 |
Steel FE-PL48 950 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Bars De Less Than or Equal to 100 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2459 |
Steel FE-PL48 950 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Forgings De Less Than or Equal to 100 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2460 |
Steel FE-PM32 600 MPa Less Than or Equal to Rm Less Than or Equal to 800 MPa Bars De Less Than or Equal to 70 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2461 |
Steel FE-PM32 600 MPa Less Than or Equal to Rm Less Than or Equal to 800 MPa Forgings De Less Than or Equal to 70 mm Aerospace Series-Edition |
|
AECMA PREN 2462 |
Steel FE-PA13 Softened Bars De Less Than or Equal to 100 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2463 |
Steel FE-PA13 Softened Sheets, Strips and Plates 0,5 mm Less Than or Equal to a Less Than or Equal to 20 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2464 |
Steel FE-PA13 Softened Tubes for Structures 0,5 mm Less Than or Equal to a Less Than or Equal to 5 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2465 |
Aerospace series Steel FE-PA3901 (X2CrNi18-9) Softened 450 MPa Less than or Equal to Rm Less than or Equal to 680 MPa Bar for machining 4 mm Less than or Equal to De Less than or Equal to 100 mm-Edition P 1 |
|
AECMA PREN 2465 |
Steel FE-PA11 Softened Bars De Less Than or Equal to 100 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2466 |
Steel FE-PA11 Softened Forgings De Less Than or Equal to 100 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2467 |
Aerospace series Steel FE-PA3901 (X2CrNi18-9) Air melted Softened Plate, sheet and strip 0,4 mm Less than or Equal to a Less than or Equal to 20 mm 520 MPa Less than or Equal to Rm Less than or Equal to 670 MPa-Edition P 1 |
|
AECMA PREN 2467 |
Steel FE-PA11 Softened Sheets or Plates 0,5 mm Less Than or Equal to a Less Than or Equal to 20 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2468 |
Steel FE-PA11 Softened Tubes 0,5 mm Less Than or Equal to a Less Than or Equal to 5 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2469 |
Aerospace Series Steel FE-PA3901 (X1CrNi18-10) Air Melted Softened Wires 0,4 Less Than or Equal to D Less Than or Equal to 12,5 mm 450 MPa Less Than or Equal to Rm Less Than or Equal to 650 MPa-Edition P 1 |
|
AECMA PREN 2469 |
Steel FE-PA11 Softened Wires 1,5 mm Less Than or Equal to D Less Than or Equal to 12,5 mm Aerospace Series-Edition 2; Inactive for New Design See PREN 2469 Edition P 1 |
|
AECMA PREN 2470 |
Steel FE-PA11 Softened and Cold Drawn Wires for Rivets 1mm Less Than or Equal to D Less Than or Equal to 10 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2471 |
Steel FE-PL74 1250 MPa Less Than or Equal to Rm Less Than or Equal to 1450 MPa Bars De Less Than or Equal to 40 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2472 |
Steel FE-PL74 1250 MPa Less Than or Equal to Rm Less Than or Equal to 1450 MPa Forgings De Less Than or Equal to 40 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2473 |
Steel FE-PL74 900MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Bars De Less Than or Equal to 150 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2474 |
Steel FE-PL74 900 MPa Less Than or Equal to Rm Less Than or Equal to 1100 MPa Forgings De Less Than or Equal to 150 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2477 |
Steel FE-PL75 1100 MPa Less Than or Equal to Rm Less Than or Equal to 1250 MPa Forgings De Less Than or Equal to 100 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2478 |
Steel FE-PL75 1250 MPa Less Than or Equal to Rm Less Than or Equal to 1400 MPa Bars De Less Than or Equal to 40 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2479 |
Steel FE-PL75 1250 MPa Less Than or Equal to Rm Less Than or Equal to 1400 MPa Forgings De Less Than or Equal to 40 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2480 |
Steel FE-PL76 1250 MPa Less Than or Equal to Rm Less Than or Equal to 1400 MPa Bars De Less Than or Equal to 75 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2481 |
Steel FE-PL76 1250 MPa Less Than or Equal to Rm Less Than or Equal to 1400 MPa Forgings De Less Than or Equal to 75 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2482 |
Steel FE-PL76 1100 MPa Less Than or Equal to Rm Less Than or Equal to 1300 MPa Bars De Less Than or Equal to 100 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2483 |
Steel FE-PL76 1100 MPa Less Than or Equal to Rm Less Than or Equal to 1300 MPa Forgings De Less Than or Equal to 100 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2485 |
Aerospace Series Aluminium Alloy AL-P2214- Forging Stock-Edition P 1 |
|
AECMA PREN 2485 |
Aluminium Alloy 2214-F Cast or Extruded Forging Stocks Aerospace Series-Edition 1 |
|
AECMA PREN 2485 |
Aluminium Alloy 2214-F Cast or Extruded Forging Stocks Aerospace Series-Edition 2 |
|
AECMA PREN 2486 |
Aerospace Series Aluminium Alloy AL-P2618A Forging Stock-Edition P 1 |
|
AECMA PREN 2486 |
Aluminium Alloy 2618 A-F Cast or Extruded Forging Stocks Aerospace Series-Edition 1 |
|
AECMA PREN 2487 |
Aluminium Alloy 7009-F Cast or Extruded Forging Stocks Aerospace Series-Edition 1 |
|
AECMA PREN 2488 |
Aluminium Alloy 7075-F Cast or Extruded Forging Stocks Aerospace Series-Edition 1 |
|
AECMA PREN 2489 |
Aerospace Series Fibre Reinforced Plastics Determination of the Action of Liquid chemicals-Issue P 1 |
|
AECMA PREN 2491 |
Aerospace Series Molybdenum Disulphide Dry Lubricants Coating Methods-Edition 1 |
|
AECMA PREN 2500-2 |
Aerospace Series Instructions for the Drafting and Use of Metallic Material Standards Part 2 : Specific Requirements for Aluminium, Aluminium Alloys and Magnesium Alloys-Edition P 2 |
|
AECMA PREN 2500-3 |
Aerospace Series Instructions for the Drafting and Use of Metallic Material Standards Part 3 : Specific Requirements for Heat Resisting Alloys-Edition P 2 |
|
AECMA PREN 2500-5 |
Aerospace Series Instructions for the Drafting and Use of Metallic Material Standards Part 5 : Specific Requirements for Steel-Edition P 2 |
|
AECMA PREN 2500-6 |
Aerospace Series Instructions for the Drafting and Use of Metallic Material Standards Part 6: Specific Requirements for Filler Metals for Brazing-Edition P 1 |
|
AECMA PREN 2501 |
Aerospace Series Bearings, Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner and Wide Inner Ring Dimensions and Loads |
|
AECMA PREN 2503 |
Steel FE-PM66 930 Less Than or Equal to Rm Less Than or Equal to 1080 MPa Forgings De Less Than or Equal to 150 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2505 |
Steel FE-PM66 1130 Less Than or Equal to Rm 1330 MPa Forgings De Less Than or Equal to 150 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2506 |
Steel FE-PM66 1270 Less Than or Equal to Rm Less Than or Equal to 1470 MPa Bars De Less Than or Equal to 100 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2507 |
Steel FE-PM66 1270 Less Than or Equal to Rm Less Than or Equal to 1470 MPa Forgings De Less Than or Equal to 100 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2508 |
Aluminium Alloy 5086-H111 Drawn Tubes for Structural Applications Aerospace Series-Edition 1 |
|
AECMA PREN 2509 |
Aluminium Alloy 2017A-T42 Drawn Tubes for Structural Applications Aerospace Series-Edition 1 |
|
AECMA PREN 2511 |
Aerospace Series Aluminium Alloy AL-P7075-T7351 Plate 6 mm Less Than a Less Than or Equal to 100 mm-Edition P 1 |
|
AECMA PREN 2511 |
Aerospace Series Aluminium Alloy AL-P7075-T7351 Plate 6 mm Less Than a Less Than or Equal to 100 mm-Edition P 2 |
|
AECMA PREN 2511 |
Aerospace Series Aluminium Alloy AL-P7075-T7351 Plate 6 mm Less Than a Less Than or Equal to 100 mm-Edition P2 |
|
AECMA PREN 2512 |
Aerospace Series Aluminium Alloy AL-P7175-T7351 Plate 6 mm Less Than a Less Than or Equal to 100 mm-Edition P 1 |
|
AECMA PREN 2512 |
Aerospace Series Aluminium Alloy AL-P7175-T7351 Plate 6mm Less Than a Less Than or Equal to 100mm-Edition P 2 |
|
AECMA PREN 2517 |
Titanium Alloy TI-P63 Annealed Sheets, Strips and Plates A Less Than or Equal to 100 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2518 |
Titanium TI-P02 390 MPa Less Than or Equal to Rm Less Than or Equal to 540 MPa Bars De Less Than or Equal to 200 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2519 |
Titanium TI-P04 540 MPa Less Than or Equal to Rm Less Than or Equal to 740 MPa Bars De Less Than or Equal to 200 mm Aerospace Series-Inactive for New Design; See PREN 3453 and PREN 3461; Edition 2 |
|
AECMA PREN 2520 |
Titanium TI-P04 540 MPa Less Than or Equal to Rm Less Than or Equal to 740 MPa Forgings De Less Than or Equal to 200 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2521 |
Titanium Alloy TI-P11 540 MPa Less Than or Equal to Rm Less Than or Equal to 700 MPa Bars De Less Than or Equal to 200 mm Aerospace Series-Inactive for New Design; See PREN 3454 and PREN 3462; Edition 2 |
|
AECMA PREN 2522 |
Titanium Alloy TI-P11 540 MPa Less Than or Equal to Rm - Less Than or Equal to 700 MPa Forgings De Less Than or Equal to 200 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2523 |
Titanium alloy TI-P11 650 MPa Less Than or Equal to Rm Less Than or Equal to 880 MPa Bars De Less Than or Equal to 75 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2524 |
Titanium Alloy TI-P11 650 MPa Less Than or Greater to Rm Less Than or Greater to 880 MPa Forgings De Less Than or Equal to 75 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2525 |
Titanium TI-P01 290 MPa Less Than Rm Less Than or Equal to 420 MPa Sheets and Strips a Less Than or Equal to 5 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2526 |
Titanium TI-P02 390 MPa Less Than Rm Less Than or Equal to 540 MPa Sheets and Strips a Less Than or Equal to 5 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2527 |
Titanium TI-P04 570 MPa Less Than Rm Less Than or Equal to 730 MPa Sheets and Strips a Less Than or Equal to 5 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2528 |
Titanium Alloy TI-P11 540 MPa Less Than Rm Less Than or Equal to 700 MPa Sheets and Strips a Less Than or Equal to 5 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2530 |
Titanium Alloy TI-P63 Annealed - 900 MPa Less Than or Equal to Rm Less Then or Equal to 1160 MPa Bars De Less Than or Equal to 150 mm Aerospace Series-Inactive for New Design; See PREN 3310 and PREN 3311; Edition 2 |
|
AECMA PREN 2531 |
Titanium Alloy TI-P63 Annealed - 900 MPa Less Than or Equal to Rm Less Than or Equal to 1160 MPa Forgings De Less Than or Equal to 150 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2532 |
Titanium Alloy TI-P68 - 1100 Less Than or Equal to Rm Less Than or Equal to 1280 MPa Bar De Less Than or Equal to 25 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2534 |
Titanium Alloy TI-P68 1000 Less Than or Equal to Rm Less Than or Equal to 1200 MPa Bar 100 Less Than De Less Than or Equal to 150 mm Aerospace Series-Edition 1 |
|
AECMA PREN 2538 |
Aerospace Series Steel FE-PM3801 (X5CrNiCu17-4) Air Melted Solution Treated and Precipitation Hardened Sheet and Strip a Less Than or Equal to 6 mm Rm Greater Than or Equal to 1 310 MPa-Edition P3 |
|
AECMA PREN 2538 |
Aerospace Series Steel FE-PM3801 (X5CrNiCu17-4) Air Melted Solution Treated and Precipitation Treated Sheet and Strip a Less Than or Equal to 6 mm Rm Greater Than or Equal to 1 310 MPa-Edition P 3; Inactive for New Design See En 2540 |
|
AECMA PREN 2538 |
Aerospace Series Steel FE-PM61 Solution Annealed and Precipitation Hardened 1240 Less than or Equal to Rm Less Than or Equal to 1310 MPa Sheet a Less than or Equal to 10 mm-Issue P 2 |
|
AECMA PREN 2538 |
Steel FE-PM61 1240 Less Than or Equal to Rm Less Than or Equal to 1310 MPa Sheet a Less Than or Equal to 10 mm |
|
AECMA PREN 2539 |
Aerospace Series Steel FE-PM3801 (X5CrNiCu17-4) Air Melted Solution Treated and Precipitation Hardened Bar a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 965 MPa-Edition P2 |
|
AECMA PREN 2539 |
Aerospace Series Steel FE-PM3801 (X5CrNiCu17-4) Air Melted Solution Treated and Precipitation Treated Bar a or D Less Than or Equal to 200 mm Rm Greater Than or Equal to 965 MPa-Edition P 2; Inactive for New Design See EN 3161 |
|
AECMA PREN 2539 |
Aerospace Series Steel FE-PM61 Solution Annealed and Precipitation Hardened Rm Greater Than or Equal to 960 MPa Bar De Less Than or Equal to 120 mm-Issue P 1 |
|
AECMA PREN 2541 |
Aerospace Series Steel FE-PA 18 Quenched and Cold Drawn Wire for Spring De Less Than or Equal to 4,0 mm-Issue P 2 |
|
AECMA PREN 2542 |
Aerospace Series Steel FE-PL43S Annealed Bar and Wire De is Less Than or Equal to 40 mm for Prevailing Torque Nuts-Issue P 2 |
|
AECMA PREN 2542 |
Steel FE-PL43S 1250 Less Than or Equal to Rm Less Than or Equal to 1400 MPa Bar and Wire De Less Than or Equal to 40 mm Only for Prevailing Torque Nuts |
|
AECMA PREN 2543 |
Steel FE-PL43S 1250 Less Than or Equal to Rm Less Than or Equal to 1400 MPa Sheet and Strip 0.3 Less Than or Equal to a Less Than or Equal to 2 mm Only for Prevailing Torque Nuts |
|
AECMA PREN 2544 |
Representation of Rivets on Drawings for Aerospace Equipment Aerospace Series-Edition 1 |
|
AECMA PREN 2546 |
Aerospace Series Washers, Lock with Radial Serrations in Corrosion Resisting Steel Dimensions |
|
AECMA PREN 2549 |
Aerospace Series Bolts, Normal Hexagonal Head, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated Classification: 1 100 MPa (at Ambient Temperature)/315 Degrees C-Edition P 2 |
|
AECMA PREN 2549 |
Bolts, Hexagonal Normal Head, Close Tolerance Shank, Short Thread in Titanium, Anodised Classification 1100 MPa/315 Degrees Celsius |
|
AECMA PREN 2550 |
Aerospace Series Rivets, Solid, 100 Degree Countersunk Normal Head, in Aluminium 1050A Inch Based Series-Edition 2 |
|
AECMA PREN 2550 |
Rivets, Solid, Countersunk Head in Aluminium EN2114 |
|
AECMA PREN 2551 |
Aerospace Series Rivets, Solid, 100 Degree Countersunk Head with Dome, in Aluminium Alloy 2117, Inch Based Series-Edition 3 |
|
AECMA PREN 2552 |
Aerospace Series Rivets, Solid, 100 Degree Countersunk Normal Head with Dome, in Aluminium Alloy 2117, Anodised or Chromated, Inch Based Series-Edition 3 |
|
AECMA PREN 2552 |
Aerospace Series Rivets, Solid, Countersunk Head with Dome in Aluminium Alloy EN 2627 Anodised-Edition 2 |
|
AECMA PREN 2553 |
Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head with Dome, in Aluminium Alloy 2017A, Inch Based Series-Edition 2 |
|
AECMA PREN 2553 |
Aerospace Series Rivets, Solid, Countersunk Head with Dome in Aluminium Alloy EN2116-Edition 1 |
|
AECMA PREN 2555 |
Aerospace Series Rivets, Solid, Countersunk Head with Dome in Aluminium Alloy EN2117-Edition 1 |
|
AECMA PREN 2556 |
Aerospace Series Rivets, Solid, 100 Degree Countersunk Normal Head with Dome, in Aluminium Alloy 5066A, Anodized or Chromated, Inch Based Series-Edition 2 |
|
AECMA PREN 2556 |
Aerospace Series Rivets, Solid, Countersunk Head with Dome in Aluminium Alloy EN2117 Anodised-Edition 1 |
|
AECMA PREN 2557 |
Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of Mass Per Unit Area-Issue P 1 |
|
AECMA PREN 2558 |
Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Percentage of Volatile Matter-Issue P 1 |
|
AECMA PREN 2559 |
Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Resin and Fibre Content and the Mass of Fibre Per Unit Area-Issue P 1 |
|
AECMA PREN 2560 |
Aerospace Series Carbon Fibre Preimpregnates Test Method for the Determination of the Resin Flow-Issue P 1 |
|
AECMA PREN 2561 |
Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Tensile Test Parallel to the Fibre Direction-Issue P 1 |
|
AECMA PREN 2565 |
Preparation of Carbon Fibre Reinforced Resin Panels for Test Purposes |
|
AECMA PREN 2566 |
Aerospace Series Fluorocarbon Rubber (FPM) Hardness 70 IRHD-Edition P 1 |
|
AECMA PREN 2567 |
Aerospace Series Fluorocarbon Rubber (FPM) Hardness 80 IRHD-Edition P 1 |
|
AECMA PREN 2568 |
Aerospace Series Fluorocarbon Rubber (FPM) Hardness 90 IRHD-Edition P 1 |
|
AECMA PREN 2569 |
Aerospace Series Control Cable Fittings and Turnbarrels Technical Specification-Edition 1 |
|
AECMA PREN 2573 |
Aerospace Series Steel FE-PA13 Softened and Lightly Drawn Wire 0,25 Less Than or Equal to De Less Than or Equal to 5 mm-Issue P 1 |
|
AECMA PREN 2574 |
Aerospace Series Welds Information on Drawings-Edition 1 |
|
AECMA PREN 2575 |
Aerospace Series Filming of Documents 16 mm Microfilm-Edition 1 |
|
AECMA PREN 2582 |
Aerospace Series Bolts in Heat Resisting Nickel Base Alloy NI-P101HT(Waspaloy) Classification: 1210 MPa/730 Degrees Celsius Technical Specification-Issue P 1 |
|
AECMA PREN 2583 |
Aerospace Series Bolts in Heat Resisting Nickel Base Alloy NI-P100HT(Inco 718) Classification: 1275 MPa/650 Degrees Celsius Technical Specification-Issue P 1 |
|
AECMA PREN 2585 |
Aerospace Series Bearings, Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner, Wide Series Elevated Loads at Ambient Temperature Dimensions and Loads-Issue P 1 |
|
AECMA PREN 2586 |
Aerospace Series Washers, Lock for Flight Control Rods Dimensions-Issue P 1 |
|
AECMA PREN 2588 |
Aerospace Series Bearings, Spherical Plain in Corrosion Resisting Steel with Assembly Slots Dimensions and Loads-Edition P 1 |
|
AECMA PREN 2589 |
Aerospace Series Steel Sheet and Strip, Cold Rolled Thickness 0,1 mm Less Than or Equal to a Less Than or Equal to 3 mm Dimensions-Edition P 1 |
|
AECMA PREN 2591-212 |
Aerospace Series Elements of Electrical and Optical Connection - Test Methods Part 212: Surface Transfer Impedance-Edition 8E |
|
AECMA PREN 2591-214 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 214: Lightning Strike, Current and Voltage Pulse-Edition P 1 |
|
AECMA PREN 2591-218 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 218: Ageing of Terminal Lugs and In-Line Splices by Temperature and Current Cycling-Edition P 1 |
|
AECMA PREN 2591-219 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 219: Voltage Strength for Insulated Terminal Lugs and In-Line Splices-Edition P 1 |
|
AECMA PREN 2591-220 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 220: Contact/Conductor joint Ageing by Current and Temperature Cycling-Edition P 1 |
|
AECMA PREN 2591-222 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 222: Insertion Loss (I.L.)-Edition P 1 |
|
AECMA PREN 2591-223 |
Aerospace series Elements of electrical and optical connection Test methods Part 223: Measurement of characteristic impedance of a coaxial connector or contact-Edition P 1 |
|
AECMA PREN 2591-224 |
Aerospace series Elements of electrical and optical connection Test methods Part 224: RF leakage-Edition P 1 |
|
AECMA PREN 2591-225 |
Aerospace series Elements of electrical and optical connection Test methods Part 225: high potential withstanding voltage-Edition P 1 |
|
AECMA PREN 2591-226 |
Aerospace series Elements of electrical and optical connection Test methods Part 226: Corona level-Edition P 1 |
|
AECMA PREN 2591-325 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 325: Ice Resistance-Edition P 1 |
|
AECMA PREN 2591-420 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 420: Michanical Strength of Rear Accessories-Edition P 1 |
|
AECMA PREN 2591-421 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 421: Free Fall-Edition P 1 |
|
AECMA PREN 2591-422 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 422: Locking Wire Hole Strength-Edition P 1 |
|
AECMA PREN 2591-423 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 423: Connector Accessory Thread Strength |
|
AECMA PREN 2591-423 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 423: Connector Rear Accessories Thread Strength-Edition P 1 |
|
AECMA PREN 2591-428 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 428: Sinusoidal Vibrations with Passage of Current for Crimped Terminal Lugs-Edition P 1 |
|
AECMA PREN 2591-501 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 501: Soft Solderability-Edition P 1 |
|
AECMA PREN 2591-507 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 507: Plating Porosity-Edition P 1 |
|
AECMA PREN 2591-509 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 509: Adhesion of Coating on Contacts-Edition P 1 |
|
AECMA PREN 2591-512 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 512: Effectiveness of Non-Removable Fixing of Hermetically Sealed Connector Shell-Edition P 1 |
|
AECMA PREN 2591-513 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 513: Magnetic Permeability-Edition P 1 |
|
AECMA PREN 2591-605 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 605: Optical Elements Return Loss-Edition P 1 |
|
AECMA PREN 2591-607 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 607: Optical Elements Immunity to Ambient Light Coupling-Edition P 1 |
|
AECMA PREN 2591-609 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 609: Optical Elements Effectiveness of Cable Attachment Cable Cyclic Flexing-Edition P 2 |
|
AECMA PREN 2591-6101 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 6101: Optical Elements Visual Examination-Edition P 1 |
|
AECMA PREN 2591-613 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 613: Optical Elements Impact Test-Edition P 1 |
|
AECMA PREN 2591-614 |
Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 614: Optical Elements Connector Radial Compression-Edition P 1 |