|
CENELEC EN 60060-2 |
High-Voltage Test Techniques Part 2: Measuring Systems-Includes Amendment A11: 1998; IEC 60-2: 1994, + A1: 1996, Modified |
|
CENELEC EN 60068-2-77 |
Environmental Testing Part 2-77: Tests - Test 77: Body Strength and Impact Shock-IEC 60068-2-77:1999 |
|
CENELEC EN 60601-2-12 |
Medical electrical equipment Part 2-12: Particular requirements for the safety of lung ventilators Critical care ventilators-IEC 60601-2-12:2001 |
|
CENELEC EN 60601-2-32 |
Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Associated Equipment of X-Ray Equipment (IEC 601-2-32:1994) |
|
CENELEC EN 60601-2-33 |
Medical electrical equipment Part 2-33: Particular requirements for the safety of magnetic resonance equipment for medical diagnosis-Includes Amendment A1: 2005 |
|
CENELEC EN 60601-2-5 |
Medical Electrical Equipment Part 2-5: Particular Requirements for the Safety of Ultrasonic Physiotherapy Equipment-IEC 60601-2-5: 2000; Supersedes HD 395.2.2 S1: 1986 |
|
CENELEC EN 60617-3 |
Graphical Symbols for Diagrams Part 3: Conductors and Connecting Devices-IEC 617-3: 1996 |
|
CENELEC EN 61010-2-101 |
Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment-IEC 61010-2-101:2002, Modified |
|
CENELEC EN 62053-21 |
Electricity metering equipment (a.c.) Particular requirements Part 21: Static meters for active energy (classes 1 and 2)-Supersedes EN 61036: 1996 + A1: 2000; IEC 62053-21: 2003 |
|
CENELEC EN 62115 |
Electic Toys - Safety-IEC 62115:2003 + A1:2004, modified; Supersedes EN 50088:1996 |
|
CEN EN 626-1 |
Safety of Machinery - Reduction of Risks to Health from Hazardous Substances Emitted by Machinery - Part 1: Principles and Specifications for Machinery Manufacturers |
|
CEN EN ISO 10993-17 |
Biological evaluation of medical devices - Part 17: Establishment of allowable limits for leachable substances-ISO 10993-17: 2002 |
|
CEN EN ISO 10993-2 |
Biological Evaluation of Medical Devices - Part 2: Animal Welfare Requirements-ISO 10993-2:2006 |
|
CEN EN ISO 14122-2 |
Safety of Machinery - Permanent Means of Access to Machinery - Part 2: Working Platforms and Walkways-ISO 14122-2:2001 |
|
CEN EN ISO 14408 |
Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information |
|
CEN EN ISO 1660 |
Technical Drawings - Dimensioning and Tolerancing of Profiles (ISO 1660 : 1987) |
|
CENELEC CLC/TS 50459-3 |
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface Part 3: Ergonomic arrangements of ERTMS/GSM-R information |
|
CEN CR 954-100 |
Safety of Machinery - Safety-Related Parts of Control Systems - Part 100: Guide on the Use and Application of EN 954-1:1996 |
|
CEN EN 12094-13 |
Fixed Firefighting Systems - Components for Gas Extinguishing Systems - Part 13: Requirements and Test Methods for Check Valves and Non-Return Valves |
|
CEN EN 12094-2 |
Fixed firefighting systems Components for gas extinguishing systems Part 2: Requirements and test methods for non-electrical automatic control and delay devices |
|
CEN EN 12845 |
Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance |
|
CEN EN 1299 |
Mechanical Vibration and Shock - Vibration Isolation of Machines - Information for the Application of Source Isolation |
|
CEN EN 13306 |
Maintenance Terminology |
|
CEN EN 14253 |
Mechanical vibration Measurement and calculation of occupational exposure to whole-body vibration with reference to health Practical guidance |
|
CEN EN 414 |
Safety of Machinery - Rules for the Drafting and Presentation of Safety Standards |
|
CENELEC EN 50342 |
Lead-Acid Starter Batteries - General Requirements, Methods of Test and Numbering-Includes Amendments A1:2001, A2:2001 and A3:2004; Incorporates Corrigendum March 2003; Supersedes EN 60095-1:1993 |
|
CEN EN 54-18 |
Fire detection and fire alarm systems - Part 18: Input/output devices |
|
CEN EN 54-4 |
Fire detection and fire alarm systems Part 4: Power supply equipment-Includes Amendment A1: December 2002; A2: August 2006 |
|
CENELEC EN 60068-2-9 |
Environmental Testing Part 2: Tests - Guidance for Solar Radiation Testing-IEC 60068-2-9:1975 + A1:1984; Supersedes HD 323.2.9 S2:1987 |
|
CENELEC EN 60332-1-1 |
Tests on electric and optical fibre cables under fire conditions Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus-IEC 60332-1-1:2004; Partially supersedes EN 50265-1:1998 |
|
CENELEC EN 60695-1-1 |
Fire Hazard Testing Part 1-1: Guidance for Assessing the Fire Hazard of Electrotechnical Products - General Guidelines-IEC 60695-1-1: 1999 + Corrigendum 2000 |
|
CENELEC EN 61310-3 |
Safety of Machinery - Indication, Marking and Actuation - Part 3: Requirements for the Location and Operation of Actuators-IEC 61310-3: 1999 |
|
CENELEC EN 61779-2 |
Electrical Apparatus for the Detection and Measurement of Flammable Gases Part 2: Performance Requirements for Group I Apparatus Indicating a Volume Fraction up to 5% Methane in Air-Supersedes EN 50055:1998; IEC 61779-2:1998 Modified |
|
CEN EN 9132 |
Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking |
|
CEN EN ISO 11201 |
Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane |
|
CEN EN ISO 11979-10 |
Ophthalmic implants - Intraocular lenses - Part 10: Phakic intraocular lenses-ISO 11979-10:2006 |
|
CEN EN ISO 11979-7 |
Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations-ISO 11979-7:2006;: 2001 |
|
CEN EN ISO 13565-2 |
Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties - Part 2: Height Characterization Using the Linear Material Ratio Curve-ISO 13565-2: 1996 |
|
CEN EN ISO 1680 |
Acoustics - Test Code for the Measurement of Airborne Noise Emitted by Rotating Electrical Machinery-ISO 1680: 1999 |
|
CEN EN ISO 20345 |
Personal protective equipment - Safety footwear-Incorporating corrigendum February 2007 |
|
CEN EN ISO 3740 |
Acoustics - Determination of Sound Power Levels of Noise Sources - Guidelines for the Use of Basic Standards-ISO 3740: 2000 |
|
CEN EN ISO 3743-1 |
Acoustics - Determination of Sound Power Levels of Noise Sources - Engineering Methods for Small, Movable Sources in Reverberant Fields - Part 1: Comparison Method for Hard-Walled Test Rooms (ISO 3743-1 : 1994) |
|
CEN EN ISO 9614-1 |
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 1: Measurement at Discrete Points-ISO 9614-1 : 1993 |
|
CEN CEN ISO/TS 17261 |
Intelligent transport systems Automatic vehicle and equipment identification Intermodal goods transport architecture and terminology |
|
CENELEC CLC/TS 50459-4 |
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface Part 4: Data entry for the ERTMS/ETCS/GSM-R systems |
|
CEN EN 12094-9 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors |
|
CEN EN 13697 |
Chemical Disinfectants and Antiseptics - Quantitive Non-Porous Surface Test for the Evaluation of Bactericidal and/or Fungicidal Activity of Chemical Disinfectants Used in Food, Industrial, Domestic and Institutional Areas - Test Method and Requirements without Mechanical Action (Phase 2/Step 2) |
|
CEN EN 1834-2 |
Reciprocating Internal Combustion Engines - Safety Requirements for Design and Construction of Engines for Use in Potentially Explosive Atmospheres - Part 2: Group I Engines for Use in Underground Workings Susceptible to Firedamp and/or Combustible Dust |
|
CEN EN 54-11 |
Fire Detection and Fire Alarm Systems - Part 11: Manual Call Points-Including Amendment A1:2005 |
|
CEN EN 54-2 |
Fire detection and fire alarm systems à Part 2: Control and indicating equipment-Includes Amendment A1:10/2006 |
|
CEN EN 54-20 |
Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors |
|
CENELEC EN 60034-16-1 |
Rotating Electrical Machines Part 16: Excitation Systems for Synchronous Machines Chapter 1: Definitions (IEC 34-16-1 : 1991 + Corrigendum 1992) |
|
CENELEC EN 60068-2-64 |
Environmental Testing Part 2: Test Methods Test Fh: Vibration, Broad-Band Random (Digital Control) and Guidance (IEC 68-2-64 : 1993 + Corrigendum 1993) |
|
CENELEC EN 60068-2-7 |
Basic Environmental Testing Procedures Part 2: Tests Test Ga and Guidance: Acceleration, Steady State (IEC 68-2-7: 1983 + A1: 1986) |
|
CENELEC EN 60335-2-12 |
Household and similar electrical appliances - Safety Part 2-12: Particular requirements for warming plates and similar appliances-IEC 60335-2-12:2002 |
|
CENELEC EN 60335-2-5 |
Household and similar electrical appliances - Safety Part 2-5: Particular requirements for dishwashers-Includes Amendment A1:2005; IEC 60335-2-5:2002 + Corrigendum 2003 + A1:2005, Modified |
|
CENELEC EN 61010-2-020 |
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 2-020: Particular Requirements for Laboratory Centrifuges |
|
CENELEC EN 61260 |
Electroacoustics - Octave-Band and Fractional-Octave-Band Filters-Includes Amendment A1: 2001; IEC 61260: 1995 + A1: 2001 |
|
CEN EN 736-3 |
Valves - Terminology - Part 3: Definition of terms-Including amendment A1: 2001 |
|
CEN EN 9111 |
Aerospace series - Quality management systems - Assessment applicable to maintenance organizations-ISO 9001: 2000 |
|
CEN EN ISO 10993-4 |
Biological evaluation of medical devices Part 4: Selection of tests for interactions with blood-Includes Amendment 1: 07/2006; ISO 10993-4: 2002;: 1993 |
|
CEN EN ISO 10993-8 |
Biological Evaluation of Medical Devices - Part 8: Selection and Qualification of Reference Materials for Biological Tests-ISO 10993-8:2000 |
|
CEN EN ISO 14644-7 |
Cleanrooms and associated controlled environments - Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)-ISO 14644-7:2004 |
|
CEN EN ISO 20347 |
Personal protective equipment - Occupational footwear-Incorporating corrigendum February 2007; Incorporates Amendment A1: 2007 |
|
CEN EN ISO 5458 |
Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Positional Tolerancing-ISO 5458:1998 |
|
CEN EN ISO 7083 |
Technical Drawings - Symbols for Geometrical Tolerancing - Proportions and Dimensions (ISO 7083 : 1983) |
|
CEN EN ISO 8185 |
Respiratory tract humidifiers for medical use - Particular requirements for respiratory humidification systems |
|
CEN CEN/TR 12401 |
Dentistry Guidance on the classification of dental devices and accessories-Supersedes CR 12401:1996 |
|
CEN EN 12094-10 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches |
|
CEN EN 1422 |
Sterilizers for medical purposes Ethylene oxide sterilizers Requirements and test methods-Incorporates corrigendum July 2002 |
|
CEN EN 1947 |
Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles-Incorporating Amendment A1: 2007 |
|
CEN EN 20286-1 |
ISO System of Limits and Fits - Part 1: Bases of Tolerances, Deviations and Fits (ISO 286-1 : 1988) |
|
CEN EN 247 |
Heat Exchangers - Terminology |
|
CENELEC EN 50132-2-1 |
Alarm Systems - CCTV Surveillance Systems for Use in Security Applications Part 2-1: Black and White Cameras |
|
CENELEC EN 50385 |
Product Standard to Demonstrate the Compliances of Radio Base Stations and Fixed Terminal Stations for Wireless Telecommunication Systems with the Basic Restrictions or the Reference Levels Related to Human Exposure to Radio Frequency Electromagnetic Fields (110 MHz - 40 GHz) - General Public |
|
CEN EN 571-1 |
Non-Destructive Testing - Penetrant Testing - Part 1: General Principles |
|
CEN EN 60068-2-80 |
Environmental testing Part 2-80: Tests Test Fi: Vibration Mixed mode-IEC 60068-2-80:2005 |
|
CENELEC EN 60204-11 |
Safety of Machinery - Electrical Equipment of Machines - Part 11: Requirements for HV Equipment for Voltages Above 1 000 V A.C. or 1 500 V D.C. and Not Exceeding 36kV-IEC 60204-11: 2000 (F) |
|
CENELEC EN 60318-5 |
Electroacoustics - Simulators of human head and ear Part 5: 2 cm³ coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts-IEC 60318-5:2006 |
|
CENELEC EN 60584-1 |
Thermocouples Part 1: Reference Tables (IEC 584-1 : 1995) |
|
CENELEC EN 60601-2-37 |
Medical Electrical Equipment Part 2-37: Particular Requirements for the Safety of Ultrasonic Medical Diagnostic and Monitoring Equipment-Includes Amendments A1: Feruary 2005 and A2: December 2005; IEC 60601-2-37:2001 + A1:2004 + A2:2005 |
|
CENELEC EN 60721-1 |
Classification of Environmental Conditions Part 1: Environmental Parameters and Their Severities (Incorporates A2) (IEC 721-1 : 1990 + A1 : 1992 + A2 : 1995) |
|
CENELEC EN 61557-1 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements |
|
CENELEC EN 61779-5 |
Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 5: Performance Requirements for Group II Apparatus Indicating a Volume Fraction Up to 100% Gas-Supersedes EN 50058:1998; IEC 61779-5:1998, Modified |
|
CEN EN ISO 11138-1 |
Sterilization of health care products - Biological indicators - Part 1: General requirements-ISO 11138-1:2006;:1997 |
|
CEN EN ISO 11138-2 |
Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization processes-Supersedes EN 866-2:1997 and EN 866-8:1999; ISO 11138-2: 2006 |
|
CEN EN ISO 13565-1 |
Geometrical Product Specifications (GPS) - Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties Part 1: Filtering and General Measurement Conditions-ISO 13565-1: 1996 |
|
CEN EN ISO 14122-4 |
Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders-ISO 14122-4:2004 |
|
CEN EN ISO 16672 |
Ophthalmic implants - Ocular endotamponades-ISO 16672: 2003 |
|
CEN EN ISO 4589-2 |
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test-Includes A1: April 2006; ISO 4598-2:1996 |
|
CEN EN ISO 9241-4 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 4: Keyboard Requirements-ISO 9241-4: 1998 |
|
CEN EN ISO 9241-7 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 7: Requirements for Display with Reflections-ISO 9241-7:1998 |
|
CENELEC CLC/TS 50459-1 |
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface Part 1: Ergonomic principles for the presentation of ERTMS/ETCS/GSM-R information |
|
CEN EN 1060-1 |
Non-invasive sphygmomanometers - Part 1: General requirements-Includes Amendment A1: 2002 |
|
CEN EN 13059 |
Safety of Industrial Trucks - Test Methods for Measuring Vibration |
|
CEN EN 132 |
Respiratory Protective Devices - Definitions of Terms and Pictograms-Ratified European Text |
|
CEN EN 1789 |
Medical Vehicles and Their Equipment - Road Ambulances |
|
CEN EN 54-3 |
Fire detection and fire alarm systems Part 3: Fire alarm devices Sounders-Includes amendment A1:2002 and amendment A2:2006 |
|
CEN EN 547-1 |
Safety of Machinery - Human Body Measurements - Part 1: Principles for Determining the Dimensions Required for Openings for Whole Body Access into Machinery |
|
CENELEC EN 60068-2-10 |
Environmental testing Part 2-10: Tests Test J and guidance: Mould growth-IEC 60068-2-10: 2005; Supersedes HD 323.2.10 S3:1988 |
|
CENELEC EN 60068-2-31 |
Basic Environmental Testing Procedures Part 2: Tests Test Ec: Drop and Topple, Primarily for Equipment- Type Specimens (IEC 68-2-31 : 1969 + A1 : 1982) |
|
CENELEC EN 60335-2-101 |
Household and similar electrical appliances - Safety Part 2-101: Particular requirements for vaporizers-IEC 60335-2-101:2002 |
|
CEN EN 764-3 |
Pressure Equipment - Part 3: Definition of Parties Involved |
|
CEN EN 894-3 |
Safety of Machinery - Ergonomics Requirements for the Design of Displays and Control Actuators - Part 3: Control Actuators |
|
CEN EN ISO 128-20 |
Technical Drawings - General Principles of Presentation - Part 20: Basic Conventions for Lines-ISO 128-20: 1996 |
|
CEN EN ISO 266 |
Acoustics - Preferred Frequencies-ISO 266: 1997 |
|
CEN EN ISO 4126-1 |
Safety devices for protection against excessive pressure - Part 1: Safety valves-ISO 4126-1:2004; Incorporating Corrigendum August 2006 |
|
CEN EN ISO 5349-1 |
Mechanical Vibration - Measurement and Assessment of Human Exposure to Hand-Transmitted Vibration - Part 1: General Requirements-ISO 5349-1: 2001; Supersedes ENV 25349: 1992 |
|
CEN EN ISO 9241-5 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 5: Workstation Layout and Postural Requirements-ISO 9241-5:1998 |
|
CEN CEN ISO/TS 18234-3 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 3: Service and Network Information (SNI) application-ISO/TS 18234-3:2006 |
|
CENELEC CLC/TS 50459-2 |
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface Part 2: Ergonomic arrangements of ERTMS/ETCS information |
|
CEN EN 1005-4 |
Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
|
CEN EN 12094-5 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
|
CEN EN 12094-6 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for nonelectrical disable devices |
|
CEN EN 12094-7 |
Fixed Firefighting Systems - Components for Gas Extinguishing Systems - Part 7: Requirements and Test Methods for Nozzles for CO2 Systems-Includes A1: January 2005 |
|
CEN EN 12639 |
Liquid Pumps and Pump Units - Noise Test Code - Grade 2 and Grade 3 of Accuracy-Incorporating Corrigenda November 2000 and September 2004 |
|
CEN EN 12723 |
Liquid Pumps - General Terms for Pumps and Installations - Definitions, Quantities, Letter Symbols and Units |
|
CEN EN 13463-5 |
Non-electrical equipment intended for use in potentially explosive atmospheres Part 5: Protection by constructional safety c |
|
CEN EN 13463-6 |
Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source ´b´ |
|
CEN EN 1363-1 |
Fire Resistance Tests - Part 1: General Requirements |
|
CEN EN 13640 |
Stability Testing of in Vitro Diagnostic Reagents |
|
CEN EN 137 |
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking |
|
CEN EN 13861 |
Safety of machinery Guidance for the application of ergonomics standards in the design of machinery |
|
CEN EN 14470-1 |
Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids |
|
CEN EN 1555-1 |
Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 1: General |
|
CEN EN 1621-1 |
Motorcyclists´ Protective Clothing Against Mechanical Impact - Part 1: Requirements and Test Methods for Impact Protectors |
|
CEN EN 345 PRA1 |
AMD PRA1 Specification for Safety Footwear for Professional Use |
|
CEN EN 365 |
Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging |
|
CEN EN 397 |
Industrial Safety Helmets-Includes Amendment A1:2000 |
|
CEN EN 444 |
Non-Destructive Testing - General Principles for Radiographic Examination of Metallic Materials by X- and Gamma-Rays |
|
CEN EN 462-5 |
Non-Destructive Testing - Image Quality of Radiographs - Part 5: Image Quality Indicators (Duplex Wire Type), Determination of Image Unsharpness Value |
|
CENELEC EN 50130-5 |
Alarm Systems Part 5: Environmental Test Methods |
|
CENELEC EN 50267-2-2 |
Common Test Methods for Cables under Fire Conditions - Tests on Gases Evolved During Combustion of Materials from Cables - Part 2-2: Procedures - Determination of Degree of Acidity of Gases for Materials by Materials by Measuring pH and Conductivity |
|
CENELEC EN 50371 |
Generic Standard to Demonstrate the Compliance of Low Power Electronic and Electrical Apparatus with the Basic Restrictions Related to Human Exposure to Electromagnetic Fields (10 MHz - 300 GHz) - General Public |
|
CEN EN 54-10 |
Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors-Includes Amendment A1:2005 |
|
CEN EN 592 |
Instructions for Use in Vitro Diagnostic Instruments for Self-Testing |
|
CENELEC EN 60216-2 |
Electrical insulating materials Thermal endurance properties Part 2: Determination of thermal endurance properties of electrical insulating materials Choice of test criteria-(IEC 60216-2):2005;:1992 |
|
CENELEC EN 60335-2-11 |
Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers-Includes Amendment A1: 2004 and A2: 2006; IEC 60335-2-11:2002, modified |
|
CENELEC EN 60335-2-43 |
Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails-Incorporates amendment A1: 03/2006 |
|
CENELEC EN 60335-2-74 |
Household and similar electrical appliances - Safety Part 2-74: Particular requirements for portable immersion heaters-Includes A1: June 2006; IEC 60335-2-74: 2002 |
|
CENELEC EN 61014 |
Programmes for reliability growth-IEC 61014:2003 |
|
CEN EN ISO 10651-2 |
Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients-ISO 10651-2:2004; Supersedes EN 794-2:1997 |
|
CEN EN ISO 128-21 |
Technical Drawings - General Principles of Presentation - Part 21: Preparation of Lines by CAD Systems-ISO 128-21: 1997 |
|
CEN EN ISO 14698-1 |
Cleanrooms and associated controlled environments - Biocontamination control - Part 1: General principles and methods-ISO 14698-1:2003 |
|
CEN EN ISO 14738 |
Safety of machinery - Anthropometric requirements for the design of workstations at machinery-ISO 14738: 2002; Incorporating Corrigendum December 2004 |
|
CEN EN ISO 8041 |
Human response to vibration - Measuring instrumentation-ISO 8041:2005; Supersedes ENV 28041:1993 |
|
CEN EN ISO 8178-6 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 6: Report of Measuring Results and Test-ISO 8178-6:2000 |
|
CEN EN ISO 9241-1 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 1: General Introduction-Includes Amendment A1: 2001; Supersedes EN 29241-1: 1993; ISO 9241-1: 1997 + A1: 2001 |
|
CEN EN ISO 9934-1 |
Non-Destructive Testing - Magnetic Particle Testing - Part 1: General Principles-Includes Amendment A1:2003;(ISO 9934-1:2001) |
|
CEN EN ISO/IEC 15416 |
Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Print Quality Test Specification - Linear Symbols-ISO/IEC 15416: 2000; Supersedes EN 1635:1997 |
|
CENELEC CLC/TS 50459-5 |
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface Part 5: Symbols |
|
CEN EN 1034-3 |
Safety of Machinery - Safety Requirements for the Design and Construction of Paper Making and Finishing Machines - Part 3: Winders and Slitters, Plying Machines |
|
CEN EN 12094-1 |
Fixed firefighting systems - Components for gas extinguishing systems -Part 1: Requirements and test methods for electrical automatic control and delay devices |
|
CEN EN 12094-11 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices |
|
CEN EN 12094-12 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices |
|
CEN EN 12094-8 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
|
CEN EN 12198-3 |
Safety of machinery Assessment and reduction of risks arising from radiation emitted by machinery Part 3: Reduction of radiation by attenuation or screening |
|
CEN EN 12874 |
Flame Arresters - Performance Requirements, Test Methods and Limits for Use |
|
CEN EN 13023 |
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 |
|
CEN EN 13103 |
Railway Applications - Wheelsets and Bogies - Non-Powered Axles - Design Method |
|
CEN EN 143 |
Respiratory protective devices - Particle filters - Requirements, testing, marking-Including corrigenda July 2002 and March 2005; Including Amendment A1: June 2006 |
|
CEN EN 14466 |
Fire fighting pumps - Portable pumps - Safety and performance requirements, tests |
|
CEN EN 1568-1 |
Fire Extinguishing Media - Foam Concentrates - Part 1: Specification for Medium Expansion Foam Concentrates for Surface Application to Water-Immiscible Liquids |
|
CEN EN 1991-1-2 |
Eurocode 1: Actions on structures Part 1-2: General actions Actions on structures exposed to fire-Supersedes ENV 1991-2-2: 1995; (R) |
|
CEN EN 24006 |
Measurement of Fluid Flow in Closed Conduits - Vocabulary and Symbols (ISO 4006 : 1991) |
|
CEN EN 30326-1 |
Mechanical Vibration - Laboratory Method for Evaluating Vehicle Seat Vibration - Part 1 : Basic Requirements (ISO 10326-1 : 1992) |
|
CEN EN 375 |
Information Supplied by the manufacturer with in Vitro Diagnostic Reagents for Professional Use |
|
CEN EN 45544-3 |
Workplace Atmospheres - Electrical Apparatus Used for the Direct Detection and Direct Concentration Measurement of Toxic Gases and Vapours - Part 3: Performance Requirements for Apparatus Used for Measuring Concentrations Well Above Limit Values |
|
CENELEC EN 50132-4-1 |
Alarm Systems - CCTV Surveillance Systems for Use in Security Applications Part 4-1: Black and White Monitors |
|
CEN EN 54-12 |
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical light beam |
|
CENELEC EN 60068-2-60 |
Environmental Testing - Part 2: Tests Test Ke: Flowing Mixed Gas Corrosion Test (IEC 68-2-60 : 1995) |
|
CENELEC EN 60068-2-67 |
Environmental Testing - Part 2: Tests Test Cy: Damp Heat, Steady State, Accelerated Test Primarily Intended for Components (IEC 68-2-67 : 1995) |
|
CENELEC EN 60318-1 |
Electroacoustics - Simulators of Human Head and Ear Part 1: Ear Simulator for the Calibration of Supra-Aural Earphones-IEC 60318-1:1998 |
|
CENELEC EN 60335-2-103 |
Household and similar electrical appliances Safety Part 2-103: Particular requirements for drives for gates, doors and windows-IEC 60335-2-103:2002 |
|
CENELEC EN 60601-2-22 |
Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Diagnostic and Therapeutic Laser Equipment (IEC 601-2-22: 1995) |
|
CENELEC EN 60695-11-2 |
Fire hazard testing Part 11-2: Test flames 1 kW nominal pre-mixed flame Apparatus, confirmatory test arrangement and guidance-IEC 60695-11-2:2003 |
|
CENELEC EN 60721-3-2 |
Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 2: Transportation-IEC 60721-3-2: 1997 |
|
CENELEC EN 60751 |
Industrial Platinum Resistance Thermometer Sensors (Includes Amendment A2 : 1995) (IEC 751 : 1983 + A1 : 1986 + A2 : 1995) |
|
CENELEC EN 60942 |
Electroacoustics - Sound Calibrators-IEC 60942:2003 |
|
CENELEC EN 62079 |
Preparation of Instructions - Structuring, Content and Presentation-IEC 62079:2001 |
|
CEN EN 894-1 |
Safety of Machinery; Ergonomics Requirements for the Design of Displays and Control Actuators; Part 1: General Principles for Human Interactions with Displays and Control Actuators |
|
CEN EN ISO 10535 |
Hoists for the Transfer of Disabled Persons - Requirements and Test Methods |
|
CEN EN ISO 10993-14 |
Biological Evaluation of Medical Devices - Part 14: Identification and Quantification of Degradation Products from Ceramics-ISO 10993-14: 2001 |
|
CEN EN ISO 12402-7 |
Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods |
|
CEN EN ISO 14729 |
Ophthalmic Optics - Contact Lens Care Products - Microbiological Requirements and Test Methods for Products and Regimens for Hygienic Management of Contact Lenses-ISO 14729:2001 |
|
CEN EN ISO 3743-2 |
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Engineering Methods for Small, Movable Sources in Reverberant Fields - Part 2: Methods for Special Reverberation Test Rooms-ISO 3743-2 : 1994 |
|
CEN EN ISO 6385 |
Ergonomic principles in the design of work systems-ISO 6385:2004; |
|
CEN EN ISO 9614-2 |
Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 2: Measurement by Scanning-ISO 9614-2: 1996 |
|
CEN ENV 247 |
Heat Exchangers - Terminology |
|
CEN CEN ISO/TS 18234-1 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 1: Introduction, Numbering and Versions-ISO/TS 18234-1:2006 |
|
CEN CEN ISO/TS 18234-2 |
Traffic and Traveller Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 2: Syntax, Semantics and Framing Structure (SSF)-ISO/TS 18234-2:2006 |
|
CEN CEN ISO/TS 24530-1 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) - Part 1: Introduction, common data types and tpegML-ISO/TS 24530-1:2006 |
|
CEN CEN/TR 13695-2 |
Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment-Supersedes CR 13695-2:2002 |
|
CEN CEN/TS 14463 |
Health informatics - A syntax to represent the content of medical classification systems (CIaML) |
|
CEN EN 1060-3 |
Non-invasive sphygmomanometers - Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems-Includes A1: November 2005 |
|
CEN EN 12094-16 |
Fixed firefighting systems Components for gas extinguishing systems Part 16: Requirements and test methods for odorizing devices for CO2 low |
|
CEN EN 12094-3 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices |
|
CEN EN 12198-2 |
Safety of machinery Assessment and reduction of risks arising from radiation emitted by machinery Part 2: Radiation emission measurement procedure |
|
CEN EN 13104 |
Railway Applications - Wheelsets and Bogies - Powered Axles - Design Method |
|
CEN EN 13463-8 |
Non-electrical equipment for potentially explosive atmospheres Part 8: Protection by liquid immersion |
|
CEN EN 13501-5 |
Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests-Incorporating corrigendum November 2006 |
|
CEN EN 13795-1 |
Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment Part 1: General requirements for manufacturers, processors and products |
|
CEN EN 13821 |
Potentially explosive atmospheres Explosion prevention and protection Determination of minimum ignition energy of dust/air mixtures |
|
CEN EN 14182 |
Packaging Terminology Basic terms and definitions |
|
CEN EN 165 |
Personal Eye-Protection - Vocabulary |
|
CEN EN 1834-3 |
Reciprocating Internal Combustion Engines - Safety Requirements for Design and Construction of Engines for Use in Potentially Explosives Atmospheres - Part 3: Group II Engines for Use in Flammable Dust Atmospheres |
|
CEN EN 1865 |
Specifications for Stretchers and Other Patient Handling Equipment Used in Road Ambulances |
|
CEN EN 1992-1-2 |
Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design-Supersedes ENV 1992-1-2:1995 |
|
CEN EN 45020 |
Standardization and related activities - General vocabulary |
|
CEN EN 45544-2 |
Workplace Atmospheres - Electrical Apparatus Used for the Direct Detection and Direct Concentration Measurement of Toxic Gases and Vapours - Part 2:Performance Requirements for Apparatus Used for Measuring Concentrations in the Region of Limit Values |
|
CENELEC EN 50194-2 |
Electrical apparatus for the detection of combustible gases in domestic premises Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requirements |
|
CENELEC EN 50364 |
Limitation of Human Exposure to Electromagnetic Fields from Devices Operating in the Frequency Range 0 Hz to 10 GHz, Used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and Similar Applications |
|
CENELEC EN 50383 |
Basic Standard for the Calculation and Measurement of Electromagnetic Field Strength and SAR Related to Human Exposure from Radio Base Stations and Fixed Terminal Stations for Wireless Telecommunications Systems (110 MHz - 40 GHz) |
|
CEN EN 54-17 |
Fire detection and fire alarm systems - Part 17: Short-circuit isolators |
|
CEN EN 54-2:1997/AC |
CORR Fire Detection and Fire Alarm Systems - Part 2: Control and Indicating Equipment-Ratified European Text |
|
CEN EN 54-21 |
Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment |
|
CENELEC EN 60068-2-13 |
Environmental Testing - Part 2: Tests - Test M: Low Air Pressure-IEC 60068-2-13: 1983; Supersedes HD 323.2.13 S1: 1987 |
|
CENELEC EN 60216-3 |
Electrical insulating materials - Thermal endurance properties Part 3: Instructions for calculating thermal endurance characteristics |
|
CENELEC EN 60335-2-105 |
Household and similar electrical appliances - Safety Part 2-105: Particular requirements for multifunctional shower cabinets-IEC 60335-2-105:2004 |
|
CENELEC EN 60335-2-78 |
Household and similar electrical appliances Safety Part 2-78: Particular requirements for outdoor barbecues-IEC 60335-2-78:2002 |
|
CENELEC EN 60335-2-95 |
Household and similar electrical appliances - Safety Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use-IEC 60335-2-95:2002, modified |
|
CENELEC EN 60335-2-96 |
Household and similar electrical appliances - Safety Part 2-96: Particular requirements for flexible sheet heating elements for room heating-(includes amendment A1:2004); (IEC 60335-2-96:2002 + A1:2003) |
|
CENELEC EN 60601-2-24 |
Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Infusion Pumps and Controllers-IEC 60601-2-24:1998 |
|
CENELEC EN 60601-2-35 |
Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Blankets, Pads and Mattresses, Intended for Heating in Medical Use-IEC 601-2-35: 1996 |
|
CEN EN 724 |
Guidance on the Application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for Non-Active Medical Devices |
|
CEN EN 868-9 |
Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 9: Uncoated Nonwoven Materials of Polyolefines for Use in the Manufacture of Heat Sealable Pouches, Reels and Lids - Requirements and Test Methods |
|
CEN EN ISO 10139-1 |
Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use-ISO 10139-1: 2005; Supersedes EN 30139-1:1994 |
|
CEN EN ISO 10993-16 |
Biological Evaluation of Medical Devices - Part 16: Toxicokinetic Study Design for Degradation Products and Leachables-ISO 10993-16: 1997 |
|
CEN EN ISO 11688-2 |
Acoustics - Recommended Practice for the Design of Low-Noise Machinery and Equipment - Part 2: Introduction to the Physics of Low-Noise Design-ISO/TR 11688-2: 1998 |
|
CEN EN ISO 1182 |
Reaction to Fire Tests for Building Products - Non-Combustibility Test-ISO 1182:2002 |
|
CEN EN ISO 4833 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of microorganisms - Colony-count technique at 30 degrees C-ISO 4833: 2003 |
|
CEN EN ISO 5167-2 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates-ISO 5167-2:2003; Supersedes EN ISO 5167-1:1995 |
|
CEN EN ISO 6413 |
Technical Drawings - Representation of Splines and Serrations |
|
CEN EN ISO 7200 |
Technical product documentation - Data fields in title blocks and document headers-ISO 7200:2004 |
|
CEN EN ISO 9094-1 |
Small craft Fire protection Part 1: Craft with a hull length of up to and including 15 m-ISO 9094-1: 2003 |
|
CEN ENV 1187 |
Test methods for external fire exposure to roofs-Includes Amendment A1:2005;:2001 |
|
CEN CEN/TS 14826 |
Postal services - Automatic identification of items - Two dimensional bar code symbol print quality specification for machine readable Digital Postage Marks |
|
CEN EN 10266 |
Steel tubes, fittings and structural hollow sections Symbols and definitions of terms for use in product standards |
|
CEN EN 12094-4 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators |
|
CEN EN 12568 |
Foot and Leg Protectors - Requirements and Test Methods for Toecaps and Metal Penetration Resistant Inserts |
|
CEN EN 1333 |
Flanges and their joints - Pipework components - Definition and selection of PN |
|
CEN EN 13501-2 |
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
|
CEN EN 13701 |
Space Systems - Glossary of Terms |
|
CEN EN 14879-1 |
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
|
CEN EN 1834-1 |
Reciprocating Internal Combustion Engines - Safety Requirements for Design and Construction of Engines for Use in Potentially Explosives Atmospheres - Part 1: Group II Engines for Use in Flammable Gas and Vapour Atmospheres |
|
CEN EN 20286-2 |
ISO System of Limits and Fits - Part 2: Tables of Standard Tolerance Grades and Limit Deviations for Holes and Shafts-ISO 286-2 : 1988 |
|
CEN EN 27286 |
Graphical Symbols for Resistance Welding Equipment |
|
CEN EN 340 |
Protective Clothing - General Requirements |
|
CEN EN 363 |
Personal Protective Equipment Against Falls from a Height - Fall Arrest Systems |
|
CEN EN 364 |
Personal Protective Equipment Against Falls from a Height - Test Methods |
|
CEN EN 376 |
Information Supplied by the Manufacturer with in Vitro Diagnostic Reagents for Self-Testing |
|
CENELEC EN 50200 |
Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
|
CEN EN 54-13 |
Fire detection and fire alarm systems - Part 13: Compatibility assessment of system components |
|
CEN EN 584-1 |
Non Destructive Testing - Industrial Radiographic Film - Part 1: Classification of Film Systems for Industrial Radiography |
|
CENELEC EN 60044-1 |
Instrument Transformers - Part 1: Current Transformers-Including Amendments A1:2000 and A2:2003; Supersedes HD 553 S2: 1993; IEC 60044-1: 1996 + A1:2000 +A2:2002, Modified |
|
CENELEC EN 60068-2-44 |
Environmental Testing Part 2: Tests Guidance on Test T: Soldering (IEC 68-2-44 : 1995) |
|
CENELEC EN 60332-1-2 |
Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame-IEC 60332-1-2:2004; Supersedes EN 50265-2-1:1998 |
|
CENELEC EN 60584-2 |
Thermocouples Part 2: Tolerances (IEC 584-2 : 1982 + A1: 1989) |
|
CENELEC EN 61010-2-061 |
Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization-IEC 61010-2-061:2003 |
|
CENELEC EN 61557-6 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems |
|
CEN EN 736-1 |
Valves - Terminology Part 1: Definition of Types of Valves |
|
CEN EN 9110 |
Aerospace series - Quality systems - Model for quality assurance applicable to maintenance organizations |
|
CEN EN ISO 13567-2 |
Technical Product Documentation - Organization and Naming of Layers for CAD - Part 2: Concepts, Format and Codes Used in Construction Documentation-ISO 13567-2: 1998 |
|
CEN EN ISO 14660-1 |
Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions-ISO 14660-1:1999 |
|
CEN EN ISO 14726-1 |
Ships and Marine Technology - Identification Colours for the Content of Piping Systems - Part 1: Main Colours and Media-ISO 14726-1: 1999 |
|
CEN EN ISO 14730 |
Ophthalmic Optics - Contact Lens Care Products - Antimicrobial Preservative Efficacy Testing and Guidance on Determining Discard Date-ISO 14730: 2000 |
|
CEN EN ISO 21969 |
High-pressure flexible connections for use with medical gas systems-ISO 21969:2005;:2000 |
|
CEN EN ISO 6411 |
Technical Drawings - Simplified Representation of Centre Holes-ISO 6411: 1982 |
|
CEN EN ISO 81714-1 |
Design of Graphical Symbols for Use in the Technical Documentation of Products - Part 1: Basic Rules-ISO 81714-1: 1999 |
|
CEN EN ISO 8502-3 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test for the Assessment of Surface Cleanliness Part 3: Assessment of Dust on Steel Surfaces Prepared for Painting (Presssure-Sensitive Tape Method)-ISO 8502-3:1992 |
|
CEN EN ISO 9241-13 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 13: User Guidance-ISO 9241-13:1998 |
|
CEN ISO/DIS 12100-2 |
Safety of Machinery - Basic Concepts and General Principles for Design - Part 2: Technical Principles |
|
CEN CEN ISO/TS 18234-6 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 6: Location referencing applications-ISO/TS 18234-6:2006 |
|
CEN CEN ISO/TS 24530-2 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) - Part 2: tpeg-locML-ISO/TS 24530-2:2006 |
|
CENELEC CLC/TR 50417 |
Safety of household and similar electrical appliances Interpretations related to European Standards within the scope of CENELEC/TC 61 |
|
CENELEC CLC/TS 50131-4 |
Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices |
|
CENELEC CLC/TS 50459-6 |
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface Part 6: Audible information |
|
CENELEC CLC/TS 62046 |
Safety of machinery Application of protective equipment to detect the presence of persons-IEC 62046:2004 |
|
CEN CR 13935 |
Non-Destructive Testing - Generic NDE Data Format Model |
|
CEN EN 10228-4 |
Non-Destructive Testing of Steel Forgings - Part 4: Ultrasonic Testing of Austenitic and Austenitic-Ferritic Stainless Steel Forgings |
|
CEN EN 1068 |
Health informatics - Registration of coding systems |
|
CEN EN 1095 |
Deck Safety Harness and Safety Line for Use on Recreational Craft - Safety Requirements and Test Methods |
|
CEN EN 1102 |
Textiles and Textile Products - Burning Behaviour - Curtains and Drapes - Detailed Procedure to Determine the Flame Spread of Vertically Oriented Specimens |
|
CEN EN 12561-2 |
Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
|
CEN EN 12882 |
Conveyor Belts for General Purpose Use - Electrical and Flammability Safety Requirements |
|
CEN EN 1330-2 |
Non Destructive Testing - Terminology - Part 2: Terms Common to the Non-Destructive Testing Methods |
|
CEN EN 13431 |
Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value |
|
CEN EN 13823 |
Reaction to Fire Tests for Building Products - Bulding Products Excluding Floorings Exposed to the Thermal Attack by a Single Burning Item |
|
CEN EN 1385 |
Helmets for Canoeing and White Water Sports-Includes Amendment A1:2005 |
|
CEN EN 13878 |
Leisure accommodation vehicles - Terms and definitions |
|
CEN EN 14139 |
Ophthalmic optics - Specifications for ready-to-wear spectacles-Incorporating corrigendum August 2006 |
|
CEN EN 14491 |
Dust explosion venting protective systems |
|
CEN EN 1999-1-5 |
Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures |
|
CEN EN 27574(PART 2) |
Acoustics Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment Part 2: Methods for Stated Values for Individual Machines |
|
CEN EN 27574(PART 4) |
Acoustics Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment Part 4: Methods for Stated Values for Batches of Machines |
|
CEN EN 28662-1 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 1 : General; (ISO 8662-1 : 1988) |
|
CEN EN 344 PRA1 |
AMD PRA1 Requirements and Test Methods for Safety, Protective and Occupational Footwear for Professional Use |
|
CEN EN 367 |
Protective Clothing - Protection Against Heat and Fire - Method of Determining Heat Transmission on Exposure to Flame |
|
CEN EN 45501 |
Metrological Aspects of Non-Automatic Weighing Instruments |
|
CEN EN 462-2 |
Non-Destructive Testing - Image Quality of Radiographs Part 2: Image Quality Indicators (Step/Hole Type) - Determination of Image Quality Value |