|
CEN EN 462-4 |
Non-Destructive Testing - Image Quality of Radiographs - Part 4: Experimental Evaluation of Image Quality Values and Image Quality Tables |
|
CEN EN 469 |
Protective Clothing for Firefighters - Requirements and Test Methods for Protective Clothing for Firefighting-Incorporating corrigendum September 2006; Amendment 1: November 2006 |
|
CEN EN 471 |
High-visibility warning clothing for professional use - Test methods and requirements-SUPERSEDES EN 471:1994 |
|
CENELEC EN 50241-1 |
Specification for open path apparatus for the detection of combustible or toxic gases and vapours Part 1: General requirements and test methods-Includes Amendment A1: 2004 |
|
CENELEC EN 50401 |
Product standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service |
|
CEN EN 54-5 |
Fire Detection and Fire Alarm Systems - Part 5: Heat Detectors - Point Detectors |
|
CENELEC EN 60068-2-17 |
Environmental Testing Part 2: Tests Test Q: Sealing (IEC 68-2-17: 1994) |
|
CENELEC EN 60068-3-4 |
Environmental Testing - Part 3-4: Supporting Documentation and Guidance - Damp Heat Tests-IEC 60068-3-4:2001; Supersedes HD 323.2.28 S1:1988 |
|
CENELEC EN 60300-1 |
Dependability management Part 1: Dependability management systems-IEC 60300-1:2003; |
|
CENELEC EN 60318-3 |
Electroacoustics - Simulators of Human Head and Ear Part 3: Acoustic Coupler for the Calibration of Supra-Aural Earphones Used in Audiometry-IEC 60318-3:1998 |
|
CENELEC EN 60335-2-13 |
Household and similar electrical appliances - Safety Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances-Incorporating Amendment 1: 09/2004 and Corrigendum: 09/2006; IEC 60335-2-13:2002 |
|
CENELEC EN 60601-2-45 |
Medical Electrical Equipment Part 2-45: Particular Requirements for the Safety of Mammographic X-Ray Equipment and Mammographic Sterotactic Devices-IEC 60601-2-45:2001 |
|
CENELEC EN 60695-1-30 |
Fire hazard testing Part 1-30: Guidance for assessing the fire hazard of electrotechnical products Use of preselection testing procedures-IEC 60695-1-30: 2002 |
|
CENELEC EN 60721-3-4 |
Classification of Environmental Conditions; Part 3: Classification of Groups of Environmental Parameters and Their Severities; Section 4: Stationary Use at Non-Weatherprotected Locations-Includes Amendment A1:1997; IEC 721-3-4:1995 + A1:1996 |
|
CENELEC EN 61557-3 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance |
|
CENELEC EN 61557-4 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding |
|
CENELEC EN 61557-7 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence |
|
CEN EN 643 |
Paper and Board - European List of Standard Grades of Recovered Paper and Board |
|
CEN EN 736-2 |
Valves - Terminology - Part 2: Definition of Components of Valves |
|
CEN EN 764-2 |
Pressure Equipment - Part 2: Quantities, Symbols and Units |
|
CENELEC EN 82045-1 |
Document Management Part 1: Principles and Methods-IEC 82045-1: 2001 |
|
CEN EN 842 |
Safety of Machinery - Visual Danger Signals - General Requirements, Design and Testing |
|
CEN EN 999 |
Safety of Machinery - the Positioning of Protective Equipment in Respect of Approach Speeds of Parts of the Human Body |
|
CEN EN ISO 11064-2 |
Ergonomic Design of Control Centres - Part 2: Principles for the Arrangement of Control Suites-ISO 11064-2:2000 |
|
CEN EN ISO 11064-3 |
Ergonomic Design of Control Centres - Part 3: Control Room Layout-ISO 11064-3: 1999 |
|
CEN EN ISO 11820 |
Acoustics - Measurements on Silencers in Situ-ISO 11820: 1996 |
|
CEN EN ISO 11978 |
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Information Supplied by the Manufacturer-ISO 11978: 2000 |
|
CEN EN ISO 11979-2 |
Ophthalmic Implants - Intraocular Lenses - Part 2: Optical Properties and Test Methods-ISO 11979-2: 1999; Corrigendum: November 2003 |
|
CEN EN ISO 11986 |
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Guidelines for the Determination on Preservative Uptake and Release-ISO 11986:1999 |
|
CEN EN ISO 12402-5 |
Personal flotation devices - Personal flotation devices - Part 5: Buoyancy aids (level 50) - Safety requirements-ISO 12402-5:2006;:1993 |
|
CEN EN ISO 12402-6 |
Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids - Safety requirements and additional test methods-ISO 12402-6:2006 |
|
CEN EN ISO 12952-3 |
Textiles - Burning Behaviour of Bedding Items - Part 3: General Test Methods for the Ignitability by a Small Open Flame-ISO 12952-3:1998 |
|
CEN EN ISO 14915-2 |
Software ergonomics for multimedia user interfaces Part 2: Multimedia navigation and control-ISO 14915-2: 2003 |
|
CEN EN ISO 15025 |
Protective clothing Protection against heat and flame Method of test for limited flame spread-ISO 15025: 2000; Supersedes EN 532: 1994 |
|
CEN EN ISO 1716 |
Reaction to Fire Tests for Building Products - Determination of the Heat of Combustion-iso 1716: 2002 |
|
CEN EN ISO 2203 |
Technical Drawings - Conventional Representation of Gears-ISO 2203: 1973 |
|
CEN EN ISO 3767-5 |
Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other Displays - Part 5: Symbols for Manual Portable Forestry Machinery (ISO 3767-5 : 1992) |
|
CEN EN ISO 4074 |
Natural latex rubber condoms - Requirements and test methods-ISO 4074:2002/Cor.1:2003; Supersedes EN 600:1996 |
|
CEN EN ISO 5659-2 |
Plastics - Smoke Generation - Part 2: Determination of Optical Density by a Single-Chamber Test |
|
CEN EN ISO 7933 |
Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain-ISO 7933:2004; Supersedes EN 12515:1997 |
|
CEN EN ISO 8596 |
Ophthalmic Optics - Visual Acuity Testing - Standard Optotype and Its Presentation (ISO 8596 : 1994) |
|
CEN EN ISO 9241-15 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) Part 15: Command Dialogues-ISO 9241-15:1997 |
|
CEN EN ISO 9626 |
Stainless Steel Needle Tubing for Manufacture of Medical Devices-Ratified European Text:6/01/2001; ISO 9626:1991/AM 1:2001 |
|
CEN CEN ISO/TR 25108 |
Non-destructive testing - Guidelines for NDT personnel training organizations-ISO/TR 25108: 2006 |
|
CEN CEN ISO/TS 18234-5 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 5: Public Transport Information (PTI) application-ISO/TS 18234-5:2006 |
|
CEN CEN ISO/TS 24530-3 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) - Part 3: tpeg-rtmML-ISO/TS 24530-3:2006 |
|
CEN CEN ISO/TS 24530-4 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) - Part 4: tpeg-ptiML-ISO/TS 24530-4:2006 |
|
CEN CEN/TR 13233 |
Advanced technical ceramics - Notations and symbols-Incorporating corrigendum October 2007 |
|
CEN CEN/TR 14819-2 |
Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 2: Other funicular railways and other installations |
|
CEN CEN/TR 15225 |
Guidance on Factory Production Control for the CE Marking (Attestation of Conformity 2+) of designed masonry mortars |
|
CEN CEN/TS 14014 |
Postal services - Hybrid Mail - XML definition of encapsulation of letters for automated postal handling-Supersedes ENV 14014:2001 |
|
CEN EN 10001 |
Definition and Classification of Pig-Irons |
|
CEN EN 1028-2 |
Fire-Fighting Pumps - Fire-Fighting Centrifugal Pumps with Primer - Part 2: Verification of General and Safety Requirements |
|
CEN EN 12010 |
Non-Active Surgical Implants - Joint Replacement Implants - Particular Requirements |
|
CEN EN 12216 |
Shutters, external blinds, internal blinds - Terminology, glossary and definitions |
|
CEN EN 12254 |
Screens for Laser Working Places - Safety Requirements and Testing-Includes Amendment A1:2002 |
|
CEN EN 12561-4 |
Railway applications - Tank wagons - Part 4: Top devices for top emptying and filling of liquid products |
|
CEN EN 12561-5 |
Railway applications - Tank wagons - Part 5: Top devices for bottom emptying and top filling of liquid products |
|
CEN EN 12884 |
Biotechnology - Performance Criteria for Centrifuges |
|
CEN EN 12972 |
Tanks for Transport of Dangerous Goods - Testing, Inspection and Marking of Metallic Tanks |
|
CEN EN 13193 |
Packaging - Packaging and the Environment - Terminology |
|
CEN EN 13277-6 |
Protective Equipment for Martial Arts - Part 6: Additional Requirements and Test Methods for Breast Protectors for Females |
|
CEN EN 13490 |
Mechanical Vibration - Industrial Trucks - Laboratory Evaluation and Specification of Operator Seat Vibration |
|
CEN EN 13634 |
Protective Footwear for Professional Motorcycle Riders - Requirements and Test Methods |
|
CEN EN 13795-3 |
Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - Part 3: Performance requirements and performance levels |
|
CEN EN 14390 |
Fire test - Large-scale room reference test for surface products |
|
CEN EN 14478 |
Railway applications - Braking - Generic vocabulary |
|
CEN EN 14710-1 |
Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements |
|
CEN EN 1746 |
Safety of Machinery - Guidance for the Drafting of the Noise Clauses of Safety Standards |
|
CEN EN 1792 |
Welding - Multilingual list of terms for welding and related processes |
|
CEN EN 1995-1-2 |
Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design-Incorporating Corrigendum June 2006; Supersedes ENV 1995-1-2:1994 |
|
CEN EN 21942-2 |
Dental Vocabulary - Part 2: Dental Materials |
|
CEN EN 2536 |
Aerospace Series - Hard Anodizing of Aluminium Alloys |
|
CEN EN 2851 |
Marking of Parts and Assemblies Other Than Engines - Indications on Drawings |
|
CEN EN 313-2 |
Plywood - Classification and Terminology - Part 2: Terminology |
|
CEN EN 3-6 |
Portable Fire Extinguishers - Part 6: Provisions for the Attestation of Conformity of Portable Fire Extinguishers in Accordance with EN 3 Part 1 to Part 5-Includes Amendment A1:1999 |
|
CEN EN 361 |
Personal Protective Equipment Against Falls from a Height - Full Body Harnesses |
|
CEN EN 362 |
Personal Protective Equipment Against Falls from a Height - Connectors |
|
CEN EN 45544-4 |
Workplace Atmospheres - Electrical Apparatus Used for the Direct Detection and Direct Concentration Measurement of Toxic Gases and Vapours - Part 4: Guide for Selection, Installation, Use and Maintenance |
|
CENELEC EN 50103 |
Guidance on the Application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the Active (Including Active Implantable) Medical Device Industry |
|
CENELEC EN 50132-5 |
Alarm Systems - CCTV Surveillance Systems for Use in Security Applications Part 5: Video Transmission |
|
CENELEC EN 60068-2-48 |
Environmental Testing Part 2: Tests - Guidance on the Application of the Tests of IEC 60068 to Simulate the Effects of Storage-IEC 60068-2-48: 1982 |
|
CENELEC EN 60068-2-51 |
Environmental Testing Part 2: Tests - Tests Z/BFc: Combined Dry Heat/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat Dissipating Specimens-IEC 60068-2-51:1983 |
|
CENELEC EN 60068-2-55 |
Basic Environmental Testing Procedures Part 2: Tests Test Ee and Guidance: Bounce (IEC 68-2-55: 1987) |
|
CENELEC EN 60068-2-58 |
Environmental testing Part 2-58: Tests Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)-IEC 60068-2-58:2004 |
|
CENELEC EN 60068-2-70 |
Environmental Testing Part 2: Tests Test Xb: Abrasion of Markings and Letterings Caused by Rubbing of Fingers and Hands (IEC 68-2-70 : 1995) |
|
CENELEC EN 60068-3-7 |
Environmental Testing - Part 3-7: Supporting Documentation and Guidance - Measurements in Temperature Chambers for Tests A and B (With Load)-IEC 60068-3-7:2001 |
|
CENELEC EN 60332-2-2 |
Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame-IEC 60332-2-2:2004; Supersedes EN 50265-2-2:1998 |
|
CENELEC EN 60335-2-56 |
Household and similar electrical appliances - Safety Part 2-56: Particular requirements for projectors and similar appliances-IEC 60335-2-56: 2002 |
|
CENELEC EN 60335-2-59 |
Household and similar electrical appliances - Safety Part 2-59: Particular requirements for insect killers-IEC 60335-2-59:2002, modified; Includes amendment A1:2006 |
|
CEN EN 60335-2-9/PRAC |
Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances |
|
CENELEC EN 60601-2-17 |
Medical electrical equipment Part 2-17: Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment-IEC 60601-2-17:2004 |
|
CENELEC EN 60601-2-28 |
Medical Electrical Equipment Part 2: Particular Requirements for the Safety of X-Ray Source Assemblies and X-Ray Tube Assemblies for Medical Diagnosis (IEC 601-2-28 : 1993) |
|
CENELEC EN 60695-4 |
Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products |
|
CENELEC EN 60721-3-0 |
Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities Introduction (IEC 721-3-0 : 1984 + A1 : 1987) |
|
CENELEC EN 60721-3-1 |
Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 1: Storage-IEC 60721-3-1: 1997 |
|
CENELEC EN 61034-1 |
Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus-IEC 61034-1: 2005; Supersedes EN 50268-1: 1999 |
|
CENELEC EN 61557-5 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth |
|
CEN EN 81-73 |
Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts Part 73: Behaviour of lifts in the event of fire |
|
CEN EN 981 |
Safety of Machinery - System of Auditory and Visual Danger and Information Signals |
|
CEN EN ISO 10993-9 |
Biological Evaluation of Medical Devices - Part 9: Framework for Identification and Quantification of Potential Degradation Products-ISO 10993-9:1999 |
|
CEN EN ISO 12402-3 |
Personal flotation devices - Part 3: Lifejackets, performance level 150 - Safety requirements-ISO 12402-3:2006;:1993 |
|
CEN EN ISO 12402-9 |
Personal flotation devices - Part 9: Test methods-ISO 12402-9:2006 |
|
CEN EN ISO 15535 |
General requirements for establishing anthropometric databases-ISO 15535:2006 |
|
CEN EN ISO 18064 |
Thermoplastic elastomers - Nomenclature and abbreviated terms-(ISO 18064):2003 |
|
CEN EN ISO 2178 |
Non-Magnetic Coatings on Magnetic Substrates - Measurement of Coating Thickness - Magnetic Method (ISO 2178: 1982) |
|
CEN EN ISO 3767-2 |
Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other Displays - Part 2: Symbols for Agricultural Tractors and Machinery-Includes Amendments A1:2000 and A2:2000; ISO 3767-2:1991 + A1:1995 and A2:1998 |
|
CEN EN ISO 4126-4 |
Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves-ISO 4126-4:2004 |
|
CEN EN ISO 4126-7 |
Safety devices for protection against excessive pressure - Part 7: Common data-ISO 4126-7:2004 |
|
CEN EN ISO 5349-2 |
Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-Transmitted Vibration - Part 2: Practical Guidance for Measurement at the Workplace-ISO 5349-2:2001 |
|
CEN EN ISO 8373 |
Manipulating Industrial Robots - Vocabulary (ISO 8373 : 1994) |
|
CEN EN ISO 9241-8 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 8: Requirements for Displayed Colours-ISO 9241-8:1997 |
|
CEN EN ISO 9241-9 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 9: Requirements for Non-Keyboard Input Devices-ISO 9241-9:2000 |
|
CEN EN ISO 9934-2 |
Non-Destructive Testing - Magnetic Particle Testing - Part 2: Detection media-ISO 9934-2:2002 |
|
CENELEC HD 323.2.47 S1 |
Basic Environmental Testing Procedures - Part 2: Tests. Mounting of Components. Equipment and Other Articles for Dynamic Tests Including Shock (Es). Bump (Eb). Vibration (Fc and Fd) and Steady-State Acceleration (Ga) and Guidance |
|
CEN ISO/DIS 12100-1 |
Safety of Machinery - Basic Concepts and General Principles for Design - Part 1: Basic Terminology and Methodology |
|
CEN CEN ISO/TS 18234-4 |
Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 4: Road Traffic Message (RTM) application-ISO/TS 18234-4:2006 |
|
CEN CEN/TR 15230 |
Workplace atmospheres - Guidance for sampling of inhalable, thoracic and respirable aerosol fractions |
|
CEN CEN/TR 15449 |
Geographic information Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructure |
|
CEN CEN/TS 14271 |
Health informatics - File exchange format for vital signs |
|
CEN CEN/TS 15448 |
Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) |
|
CEN EN 12182 |
Technical Aids for Disabled Persons - General Requirements and Test Methods |
|
CEN EN 12285-1 |
Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
|
CEN EN 12523 |
External Limb Prostheses and External Orthoses - Requirements and Test Methods |
|
CEN EN 12561-3 |
Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
|
CEN EN 12563 |
Non-Active Surgical Implants - Joint Replacement Implants - Specific Requirements for Hip Joint Replacement Implants-Ratified European Text |
|
CEN EN 12665 |
Light and Lighting - Basic Terms and Criteria for Specifying Lighting Requirements |
|
CEN EN 1300 |
Secure storage units - Classification for high security locks according to their resistance to unauthorized opening |
|
CEN EN 13277-1 |
Protective Equipment for Martial Arts - Part 1: General Requirements and Test Methods |
|
CEN EN 1330-1 |
Non Destructive Testing - Terminology - Part 1: List of General Terms |
|
CEN EN 13428 |
Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction |
|
CEN EN 13551 |
Inland navigation vessels - Vocabulary |
|
CEN EN 14116 |
Tanks for transport of dangerous goods - Digital interface for the product recognition device |
|
CEN EN 14610 |
Welding and allied processes - Definitions of metal welding processes |
|
CEN EN 1996-1-2 |
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design-Supersedes ENV 1996-1-2:1995 |
|
CEN EN 27574(PART 1) |
Acoustics Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and Equipment Part 1: General Considerations and Definitions |
|
CEN EN 28601 |
Data Elements and Interchange Formats - Information Interchange - Representation of Dates and Times (ISO 8601, 1st Edition 1988 and Technical Corrigendum 1: 1991) |
|
CEN EN 3-8 |
Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar |
|
CEN EN 388 |
Protective gloves against mechanical risks |
|
CEN EN 462-1 |
Non-Destructive Testing - Image Quality of Radiographs - Part 1: Image Quality Indicators (Wire Type) - Determination of Image Quality Value |
|
CEN EN 462-3 |
Non-Destructive Testing - Image Quality of Radiographs - Part 3: Image Quality Classes for Ferrous Metals |
|
CENELEC EN 50133-2-1 |
Alarm Systems - Access Control Systems for Use in Security Applications Part 2-1: General Requirements for Components |
|
CENELEC EN 50191 |
Erection and Operation of Electrical Test Equipment |
|
CENELEC EN 50392 |
Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) |
|
CEN EN 600 |
Natural Rubber Latex Male Condoms-Superseded by EN ISO 4074:2002 |
|
CENELEC EN 60068-2-57 |
Environmental Testing Part 2-57: Tests - Test Ff: Vibration - Time-History Method-IEC 60068-2-57: 1999 |
|
CENELEC EN 60068-2-61 |
Environmental Testing Part 2: Test Methods Test Z/ABDM: Climatic Sequence (IEC 68-2-61 : 1991) |
|
CENELEC EN 60068-2-66 |
Environmental Testing Part 2: Test Methods Test Cx: Damp Heat, Steady State (Unsaturated Pressurized Vapour) (IEC 68-2-66 : 1994) |
|
CENELEC EN 60068-3-3 |
Environmental Testing Part 3: Guidance Seismic Test Methods for Equipments (IEC 68-3-3 : 1991) |
|
CENELEC EN 60216-6 |
Electrical insulating materials - Thermal endurance properties Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method-IEC 60216-6:2006 |
|
CENELEC EN 60335-2-52 |
Household and similar electrical appliances Safety Part 2-52: Particular requirements for oral hygiene appliances acirtcele ralimis dna dlohesuoHpa lsecnailp tefaSy traP :25-2 aPralucitr emeriuqerstn foaro rl hysecnailppa-IEC 60335-2-52: 2002 |
|
CENELEC EN 60601-2-31 |
Medical Electrical Equipment Part 2-31: Particular Requirements for the Safety of External Cardiac Pacemakers with Internal Power Source-Includes Amendment A1: 1998; IEC 60601-2-31: 1994 + A1: 1998 |
|
CENELEC EN 60601-2-51 |
Medical electrical equipment Part 2-51: Particular requirements for safety, including essential performance, of recording and analysing single channel and multichannel electrocardiographs-IEC 60601-2-51:2003 |
|
CENELEC EN 60695-7-1 |
Fire hazard testing Part 7-1: Toxicity of fire effluent General guidance-IEC 60695-7-1:2004 |
|
CENELEC EN 61010-031 |
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 031: Safety Requirements for Hand-Held Probe Assemblies for Electrical Measurement and Test-IEC 61010-031:2002 |
|
CENELEC EN 61557-2 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance |
|
CENELEC EN 61557-9 |
Electrical Safety in Low Voltage Distribution Systems up to 1 kV a.c. and 1,5 kV d.c. Equipment for Testing, Measuring or Monitoring of Protective Measures Part 9: Equipment for Insulation Fault Location in IT Systems-IEC 61557-9: 1999 |
|
CENELEC EN 61925 |
Multimedia systems and equipment Multimedia home server systems Vocabulary of home server-IEC 61925:2005 |
|
CENELEC EN 62083 |
Medical Electrical Equipment - Requirements for the Safety of Radiotherapy Treatment Planning Systems-IEC 62083:2000 |
|
CEN EN 626-2 |
Safety of Machinery - Reduction of Risk to Health from Hazardous Substances Emitted by Machinery - Part 2: Methodology Leading to Verification Procedures |
|
CEN EN 739 |
Low-pressure hose assemblies for use with medical gases-Includes Amendment A1: 2002 |
|
CEN EN 795 |
Protection Against Falls from a Height - Anchor Devices - Requirements and Testing-Includes Amendment A1:2000 |
|
CENELEC EN 81714-2 |
Design of Graphical Symbols for Use in the Technical Documentation of Products - Part 2: Specification for Graphical Symbols in a Computer Sensible Form, Including Graphical Symbols for a Reference Library, and Requirements for Their Interchange |
|
CEN EN 837-2 |
Pressure Gauges - Part 2: Selection and Installation Recommendations for Pressure Gauges |
|
CEN EN 934-2 |
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling-Including Amendments A1:2004 and A2:2005 |
|
CEN EN ISO 11140-4 |
Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dicktype test for detection of steam penetration |
|
CEN EN ISO 11690-3 |
Acoustics - Recommended Practice for the Design of Low-Noise Workplaces Containing Machinery - Part 3: Sound Propagation and Noise Prediction in Workrooms-ISO/TR 11690-3:1997 |
|
CEN EN ISO 11810-1 |
Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration-ISO 11810-1:2005; Supersedes EN ISO 11810:2002 |
|
CEN EN ISO 11925-2 |
Reaction to Fire Tests - Ignitability of Building Products Subjected to Direct Impingement of Flame - Part 2: Single-Flame Source Test-ISO 11925-2: 2002 |
|
CEN EN ISO 12001 |
Acoustics - Noise Emitted by Machinery and Equipment - Rules for the Drafting and Presentation of a Noise Test Code-ISO 12001: 1996 |
|
CEN EN ISO 12402-1 |
Personal flotation devices - Part 1: Lifejackets for seagoing ships - Safety requirements-ISO 12402-1:2005 |
|
CEN EN ISO 12402-10 |
Personal flotation devices - Part 10: Selection and application of personal flotation devices and other relevant devices-:1997 |
|
CEN EN ISO 12402-2 |
Personal flotation devices - Part 2: Lifejackets, performance level 275 - Safety requirements-ISO 12402-2:2006 |
|
CEN EN ISO 12402-8 |
Personal flotation devices - Part 8: Accessories - Safety requirements and test methods-ISO 12402-8:2006; Supersedes (EN 394):1993 |
|
CEN EN ISO 12952-2 |
Textiles - Burning Behaviour of Bedding Items - Part 2: Specific Test Methods for the Ignitability by a Smouldering Cigarette-ISO 12952-2:1998 |
|
CEN EN ISO 13090-1 |
Mechanical Vibration and Shock - Guidance on Safety Aspects of Tests and Experiments with People - Part 1: Exposure to Whole-Body Mechanical Vibration and Repeated Shock-ISO 13090-1:1998 |
|
CEN EN ISO 14660-2 |
Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature-ISO 14660-2:1999 |
|
CEN EN ISO 14698-2 |
Cleanrooms and associated controlled environments -Biocontamination control - Part 2: Evaluation and interpretation of biocontamination data-ISO 14698-2: 2003 |
|
CEN EN ISO 14915-3 |
Software ergonomics for multimedia user interfaces Part 3: Media selection and combination-ISO 14915-3: 2002 |
|
CEN EN ISO 15883-1 |
Washer-disinfectors - Part 1: General requirements, terms and definitions and tests-ISO 15883-1:2006 |
|
CEN EN ISO 5136 |
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method-ISO 5136:2003; Supersedes EN 25136:1993 |
|
CEN EN ISO 5456-1 |
Technical drawings Projection methods Part 1: Synopsis-ISO 5456-1:1996 |
|
CEN EN ISO 6433 |
Technical Drawings - Item References (ISO 6433 : 1981) |
|
CEN EN ISO 8178-2 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 2: Measurement of Gaseous and Particulate Exhaust Emissions at Site-ISO 8178-2: 1996 |
|
CEN EN ISO 8178-5 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 5: Test Fuels-ISO 8178-5:1997 |
|
CEN EN ISO 9241-11 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 11: Guidance on Usability-Incorporating Amendment N0. 1 |
|
CEN EN ISO 9394 |
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Determination of Biocompatibility by Ocular Study Using Rabbit Eyes-ISO 9394:1998 |
|
CENELEC ENV 50166-1 |
Human Exposure to Electromagnetic Fields Low-Frequency (0 Hz to 10 kHz) |
|
CENELEC ENV 60 695- 2-4/2 |
Fire Hazard Testing Part 2: Test Methods Section 4/Sheet 2: 500 W Nominal Test Flames and Guidance (IEC 695-2-4/2 : 1994) |
|
CEN CEN ISO/TS 11133-2 |
Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 2: Practical guidelines on performance testing of culture media-ISO/TS 11133-2:2003 |
|
CEN CEN/TS 14825 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Testing and rating at part load conditions |
|
CENELEC CLC/TR 50459-7 |
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine interface - Part 7: Specific Transmission Modules |
|
CEN EN 1028-1 |
Fire-Fighting Pumps Fire-Fighting Centrifugal Pumps with Primer Part 1: Classification General and Safety Requirements |
|
CEN EN 12056-1 |
Gravity Drainage Systems Inside Buildings - Part 1: General and Performance Requirements |
|
CEN EN 12258-1 |
Aluminium and Aluminium Alloys - Terms and Definitions - Part 1: General Terms-Supersedes EN 23134-1:1991; EN 23134-2:1991; EN 23134-3:1991; EN 23134-4:1991 |
|
CEN EN 12442-1 |
Animal Tissues and Their Derivatives Utilized in the Manufacture of Medical Devices - Part 1: Analysis and Management of Risk |
|
CEN EN 12561-6 |
Railway applications - Tank wagons - Part 6: Manholes |
|
CEN EN 1265 |
Noise Test Code for Foundry Machines and Equipment |
|
CEN EN 12668-3 |
Non-destructive testing Characterization and verification of ultrasonic examination equipment Part 3: Combined equipment-Includes amendment A1:2004 |
|
CEN EN 12786 |
Safety of Machinery - Guidance for the Drafting of the Vibration Clauses of Safety Standards |
|
CEN EN 1330-3 |
Non-Destructive Testing - Terminology - Part 3: Terms Used in Industrial Radiographic Testing |
|
CEN EN 1330-8 |
Non-Destructive Testing - Terminology - Part 8: Terms Used in Leak Tightness Testing |
|
CEN EN 13429 |
Packaging - Reuse |
|
CEN EN 13447 |
Electrically Propelled Road Vehicles - Terminology |
|
CEN EN 13481-1 |
Railway Applications - Track - Performance Requirements for Fastening Systems - Part 1: Definitions-Includes A1: August 2006 |
|
CEN EN 13673-1 |
Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure |
|
CEN EN 14096-1 |
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control |
|
CEN EN 14175-1 |
Fume cupboards Part 1: Vocabulary |
|
CEN EN 15192 |
Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection |
|
CEN EN 1907 |
Safety requirements for cableway installations designed to carry persons - Terminology |
|
CEN EN 1970 |
Adjustable beds for disabled persons - Requirements and test methods-Incorporates Amendment A1: March 2005 |
|
CEN EN 29295 |
Acoustics - Measurement of High-Frequency Noise Emitted by Computer and Business Equipment |
|
CEN EN 347 PRA1 |
AMD PRA1 Specification for Occupational Footwear for Professional Use |
|
CEN EN 379 |
Personal eye-protection - Automatic welding filters |
|
CEN EN 472 |
Pressure Gauges - Vocabulary |
|
CENELEC EN 50264-2 |
Railway applications Railway rolling stock cables having special fire performance Standard wall Part 2: Single core cables |
|
CEN EN 515 |
Aluminium and Aluminium Alloys - Wrought Products - Temper Designations |
|
CEN EN 572-1 |
Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties-Incorporating Corrigendum September 2004 |
|
CENELEC EN 60044-2 |
Instrument Transformers - Part 2: Inductive Voltage Transformers-Includes Amendments A1:2000 and A2:2003; Supersedes HD 554 S1:1992; IEC 60044-2:1997 + A1:2000 + A2:2002, Modified |
|
CENELEC EN 60216-5 |
Electrical insulating materials Thermal endurance properties Part 5: Determination of relative thermal endurance index (RTE) of an insulating material-Supersedes HD 611.5 S1:1992; IEC 60216-5:2003 |
|
CENELEC EN 60318-2 |
Electroacoustics - Simulators of Human Head and Ear Part 2: An Interim Acoustic Coupler for the Calibration of Audiometric Earphones in the Extended High-Frequency Range-IEC 60318-2:1998 |
|
CENELEC EN 60601-2-4 |
Medical electrical equipment Part 2-4: Particular requirements for the safety of cardiac defibrillators-IEC 60601-2-4: 2002; Supersedes HD 395.2.4 S1: 1988 |
|
CENELEC EN 60601-2-7 |
Medical Electrical Equipment Part 2-7: Particular Requirements for Safety of High-Voltage Generators of Diagnostic X-Ray Generators-SupersedeIEC 60601-2-7:1998; Supersedes HD 395.2.7 S1:1989 |
|
CENELEC EN 60695-11-20 |
Fire Hazard Testing - Part 11-20: Test Flames - 500 W Flame Test Methods-Includes amendment A1:2003; IEC 60695-11-20:1999 + A1:2003; Partly Supersedes HD 441 S1:1983 |
|
CENELEC EN 60695-2-4/0 |
Fire Hazard Testing Part 2: Test Methods Section 4/Sheet 0: Diffusion Type and Premixed Type Flame Test Methods (IEC 695-2-4/0 : 1991) |
|
CENELEC EN 60721-3-5 |
Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 5: Ground Vehicle Installations-IEC 60721-3-5: 1997 |
|
CENELEC EN 60721-3-6 |
Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities Ship Environment-Supersedes HD 478.3.6 S1: 1989; Includes Amendment A2: 1997; IEC 721-3-6: 1987 + A1: 1991 + A2: 1996 |
|
CENELEC EN 61496-3 |
Safety of Machinery - Electro-Sensitive Protective Equipment Part 3: Particular Requirements for Active Opto-Electronic Protective Devices Responsive to Diffuse Reflection (AOPDDR)-IEC 61496-3:2001; |
|
CENELEC EN 61557-10 |
Electrical Safety in Low Voltage Distribution Systems Up to 1 000 V A.C. and 1 500 V D.C. - Equipment for Testing, Measuring or Monitoring of Protective Measures Part 10: Combined Measuring Equipment for Testing, Measuring or Monitoring of Protective Measures-IEC 61557-10:2000 |
|
CENELEC EN 62301 |
Household electrical appliances - Measurement of standby power-IEC 62301:2005, modified |
|
CENELEC EN 62308 |
Equipment reliability - Reliability assessment methods |
|
CEN EN 9120 |
Aerospace series - Quality management systems - Requirements for stockist distributors (based on ISO 9001:2000) |
|
CEN EN ISO 11064-1 |
Ergonomic Design of Control Centres - Part 1: Principles for the Design of Control Centres-ISO 11064-1:2000 |
|
CEN EN ISO 11064-4 |
Ergonomic design of control centres - Part 4: Layout and dimensions of workstations-ISO 11064-4:2004 |
|
CEN EN ISO 11138-3 |
Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization processes-ISO 11138-3:2006; Supersedes EN 866-3:1997 and EN 866-7:1999 |
|
CEN EN ISO 12402-4 |
Personal flotation devices - Part 4: Lifejackets, performance level 100 - Safety requirements-ISO 12402-4:2006;:1993 |
|
CEN EN ISO 13666 |
Ophthalmic Optics - Spectacle Lenses - Vocabulary-ISO 13666:1998 |
|
CEN EN ISO 13943 |
Fire Safety - Vocabulary-ISO 13943: 1999 |
|
CEN EN ISO 14163 |
Acoustics - Guidelines for Noise Control by Silencers-Incorporating Amendment N0. 1; Iso 14163: 1998 |
|
CEN EN ISO 14505-2 |
Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature |
|
CEN EN ISO 14505-3 |
Ergonomics of the thermal environment - Evaluation of the thermal environment in vehicles - Part 3: Evaluation of thermal comfort using human subjects-ISO 14505-3:2006 |
|
CEN EN ISO 14539 |
Manipulating Industrial Robots - Object Handling with Grasp-Type Grippers - Vocabulary and Presentation of Characteristics-ISO 14539:2000 |
|
CEN EN ISO 1463 |
Metallic and oxide coatings - Measurement of coating thickness - Microscopical method-ISO 1463:2003 |
|
CEN EN ISO 14915-1 |
Software ergonomics for multimedia user interfaces - Part 1: Design principles and framework-ISO 14915-1: 2002 |
|
CEN EN ISO 14937 |
Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices-Incorporating Corrigendum December 2003 and March 2005 |
|
CEN EN ISO 15008 |
Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle visual presentation-ISO 15008:2003 |
|
CEN EN ISO 17659 |
Welding Multilingual terms for welded joints with illustrations-; ISO 17659:2002 |
|
CEN EN ISO 18412 |
Water quality - Determination of chromium(VI) - Photometric method for weakly contaminated water-ISO 18412:2005 |
|
CEN EN ISO 7153-1 |
Surgical Instruments - Metallic Materials - Part 1: Stainless Steel-ISO 7153-1:1991; Including Amendment 1:1999 |
|
CEN EN ISO 8502-4 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 4: Guidance on the Estimation of the Probability of Condensation Prior to Paint Application-ISO 8502-4:1993 |
|
CEN EN ISO 8536-9 |
Infusion equipment for medical use - Part 9: Fluid lines for use with pressure infusion equipment-ISO 8536-9:2004 |
|
CEN EN ISO 9241-14 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 14: Menu Dialogues-ISO 9241-14: 1997 |
|
CEN EN ISO 9308-1 |
Water Quality - Detection and Enumeration of Escherichia Coli and Coliform Bacteria - Part 1: Membrane Filtration Method-ISO 9308-1: 2000 |
|
CEN EN ISO 9934-3 |
Non-Destructive Testing - Magnetic Particle Testing - Part 3: Equipment-ISO 9934-3:2002 |
|
CEN ENV 305 |
Heat Exchangers - Definitions of Performance of Heat Exchangers and the General Test Procedure for Establishing Performance of All Heat Exchangers |
|
CENELEC HD 27 |
Colours of the Cores of Flexible Cables and Cords |
|
CEN CEN/TR 13833 |
Qualification of construction enterprises |
|
CEN CEN/TR 14709 |
Postal services - Quality of service - Guide for the implementation of EN 13850 |
|
CEN CEN/TR 15126 |
Characterization of sludges - Good practice for landfilling of sludges and sludge treatment residues |
|
CEN CEN/TS 1071-10 |
Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning |
|
CENELEC CLC/TR 50489 |
Smart tracker chips - Feasibility study on the inclusion of RFID in Electrical and Electronic Equipment for WEEE management |
|
CEN EN 1001-1 |
Durability of wood and wood-based products - Terminology - Part 1: List of equivalent terms-Supersedes HD 1001:1984 |
|
CEN EN 1001-2 |
Durability of wood and wood based products - Terminology - Part 2: Vocabulary |
|
CEN EN 10049 |
Measurement of roughness average Ra and peak count RPc on metallic flat products |
|
CEN EN 1060-2 |
Non-Invasive Sphygmomanometers - Part 2: Supplementary Requirements for Mechanical Sphygmomanometers-Incorporating Corrigendum July 2002 |
|
CEN EN 1076 |
Workplace Atmospheres - Pumped Sorbent Tubes for the Determination of Gases and Vapours - Requirements and Test Methods |
|
CEN EN 1085 |
Wastewater Treatment - Vocabulary |
|
CEN EN 1089-3 |
Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
|
CEN EN 1143-1 |
Secure Storage Units - Requirements, Classification and Methods of Test for Resistance to Burglary - Part 1: Safes, ATM safes, Strongroom Doors and Strongrooms |
|
CEN EN 12223 |
Non-Destructive Testing - Ultrasonic Examination - Specification for Calibration Block No. 1 |
|
CEN EN 12258-2 |
Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis |
|
CEN EN 12259-2 |
Fixed firefighting systems Components for sprinkler and water spray systems Part 2: Wet alarm valve assemblies-Includes amendment A1: 2001; A2: 2005 |
|
CEN EN 12341 |
Air Quality - Determination of the PM10 Fraction of Suspended Particulate Matter - Reference Method and Field Test Procedure to Demonstrate Reference Equivalence of Measurement Methods |
|
CEN EN 12435 |
Health informatics - Expression of results of measurements in health sciences-:1999 |
|
CEN EN 12440 |
Natural Stone - Denomination Criteria |
|
CEN EN 12470-3 |
Clinical Thermometers - Part 3: Performance of Compact Electrical Thermometers (Non-Predictive and Predictive) with Maximum Device |
|
CEN EN 1264-1 |
Floor Heating - Systems and Components - Part 1: Definitions and Symbols |
|
CEN EN 12701 |
Structural Adhesives - Storage - Determination of Words and Phrases Relating to the Product Life of Structural Adhesives and Related Materials |
|
CEN EN 12753 |
Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
|
CEN EN 12944-3 |
Fertilizers and Liming Materials - Vocabulary - Part 3: Terms Relating to Liming Materials |
|
CEN EN 1304 |
Clay Roofing Tiles for Discontinuous Laying - Products Definitions and Specifications-Includes A1:1999 |
|
CEN EN 13432 |
Packaging - Requirements for Packaging Recoverable Through Composting and Biodegradation - Test Scheme and Evaluation Criteria for the Final Acceptance of Packaging |
|
CEN EN 13477-1 |
Non-Destructive Testing - Acoustic Emission - Equipment Characterization - Part 1: Equipment Description |
|
CEN EN 13506 |
Water Quality - Determination of Mercury by Atomic Fluorescence Spectrometry |
|
CEN EN 13523-8 |
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
|
CEN EN 13556 |
Round and sawn timber - Nomenclature of timbers used in Europe |
|
CEN EN 13622 |
Gas Welding Equipment - Terminology - Terms Used for Gas Welding Equipment |
|
CEN EN 13718-1 |
Air, Water and Difficult Terrain Ambulances Part 1: Medical Device Interface Requirements for the Continuity of Patient Care |
|
CEN EN 13816 |
Transportation - Logistics and Services - Public Passenger Transport - Service Quality Definition, Targeting and Measurement |
|
CEN EN 13859-1 |
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing |
|
CEN EN 140 |
Respiratory Protective Devices - Half Masks and Quarter Masks - Requirements, Testing, Marking-Ratified European Text |
|
CEN EN 14035-1 |
Fireworks Part 1: Terminology-Incorporating Corrigendum: January 2005 |
|
CEN EN 14037-1 |
Ceiling mounted radiant panels supplied with water at temperature below 120 C - Part 1: Technical specifications and requirements |
|
CEN EN 14079 |
Non-active medical devices - Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze |
|
CEN EN 14096-2 |
Non-Destructive Testing - Qualification of Radiographic Film Digitisation Systems - Part 2: Minimum Requirements |
|
CEN EN 14190 |
Gypsum plasterboard products from reprocessing - Definitions, requirements and test methods |
|
CEN EN 14339 |
Underground fire hydrants |
|
CEN EN 14394 |
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 C |
|
CEN EN 14604 |
Smoke alarm devices |
|
CEN EN 14943 |
Transport services - Logistics - Glossary of terms |