|
CEN EN 14969 |
Railway applications Track Qualification system for railway trackwork contractors |
|
CEN EN 1504-3 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
|
CEN EN 15182-4 |
Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40 |
|
CEN EN 15208 |
Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications |
|
CEN EN 15341 |
Maintenance - Maintenance Key Performance Indicators |
|
CEN EN 15380-1 |
Railway applications - Designation system for railway vehicles - Part 1: General principles |
|
CEN EN 1568-2 |
Fire Extinguishing Media - Foam Concentrates - Part 2: Specification for High Expansion Foam Concentrates for Surface Application to Water-Immiscible Liquids |
|
CEN EN 1621-2 |
Motorcyclists protective clothing against mechanical impact Part 2: Motorcyclists back protectors Requirements and test methods |
|
CEN EN 166 |
Personal Eye-Protection - Specifications |
|
CEN EN 168 |
Personal Eye-Protection - Non-Optical Test Methods |
|
CEN EN 1717 |
Protection Against Pollution of Potable Water in Water Installations and General Requirements of Devices to Prevent Pollution by Backflow |
|
CEN EN 1782 |
Tracheal Tubes and Connectors |
|
CEN EN 1868 |
Personal Protective Equipment Against Falls from a Height - List of Equivalent Terms |
|
CEN EN 1900 |
Materials and Articles in Contact with Foodstuffs - Non-Metallic Tableware - Terminology |
|
CEN EN 197-2 |
Cement - Part 2: Conformity Evaluation-Supersedes ENV 197-2:1995 |
|
CEN EN 207 |
Personal Eye-Protection - Filters and Eye-Protectors Against Laser Radiation (Laser Eye-Protectors)-Amendment A1:2002; Incorporating Corrigendum: September 2004 |
|
CEN EN 27243 |
Hot Environments - Estimation of the Heat Stress on Working Man, Based on the WBGT-Index (Wet Bulb Globe Temperature) (ISO 7243 : 1989) |
|
CEN EN 374-3 |
Protective Gloves Against Chemicals and Micro-Organisms - Part 3: Determination of Resistance to Permeation by Chemicals |
|
CEN EN 407 |
Protective gloves against thermal risks (heat and/or fire) |
|
CEN EN 4408-004 |
Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 4: Items obtained by winding |
|
CENELEC EN 50342-1 |
Lead-acid starter batteries Part 1: General requirements and methods of test |
|
CENELEC EN 50357 |
Evaluation of Human Exposure to Electromagnetic Fields from Devices Used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and Similar Applications |
|
CENELEC EN 50402 |
Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen . Requirements on the functional safety of fixed gas detection systems |
|
CEN EN 583-5 |
Non-Destructive Testing - Ultrasonic Examination - Part 5: Characterization and Sizing of Discontinuities-Includes Amendment A1:2003 |
|
CENELEC EN 60051-2 |
Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 2: Special Requirements for Ammeters and Voltmeters |
|
CENELEC EN 60068-2-74 |
Environmental Testing Part 2: Tests - Test Xc: Fluid Contamination-IEC 60068-2-74: 1999 |
|
CENELEC EN 60068-3-1 |
Environmental Testing Part 3: Background Information Section 1: Cold and Dry Heat Tests-IEC 60068-3-1:1974; + IEC 60068-3-1A:1978; Supersedes HD 323.3.1S1:1988 |
|
CENELEC EN 60068-3-6 |
Environmental Testing - Part 3-6: Supporting Documentation and Guidance - Confirmation of the Performance of Temperature/Humidity Chambers-IEC 60068-3-6: 2001 |
|
CENELEC EN 60243-2 |
Electric Strength of Insulating Materials - Test Methods Part 2: Additional Requirements for Tests Using Direct Voltage-Supersedes HD 559.2 S1:1991; IEC 60243-2:2001 |
|
CENELEC EN 60300-2 |
Dependability management Part 2: Guidelines for dependability management-IEC 60300-2:2004 |
|
CENELEC EN 60300-3-2 |
Dependability management Part 3-2: Application guide Collection of dependability data from the field-IEC 60300-3-2:2004 |
|
CENELEC EN 60335-2-28 |
Household and similar electrical appliances Safety Part 2-28: Particular requirements for sewing machines-IEC 60335-2-28:2002, modified |
|
CENELEC EN 60454-2 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test |
|
CENELEC EN 60580 |
Medical Electrical Equipment Dose Area Product Meters-Supersedes HD 379 S1: 1979; IEC 60580: 2000 |
|
CENELEC EN 60601-2-11 |
Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Gamma Beam Therapy Equipment-IEC 601-2-11: 1997 + A1:2004; Supersedes HD 395.2.11 S2:1990; Includes Amendment A1:2004 |
|
CENELEC EN 60601-2-13 |
Medical electrical equipment Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems-Incorporates amendment A1: 03/2007 |
|
CENELEC EN 60601-2-26 |
Medical electrical equipment Part 2-26: Particular requirements for the safety of electroencephalographs-IEC 60601-2-26: 2002 |
|
CENELEC EN 60601-2-39 |
Medical Electrical Equipment Part 2-39: Particular Requirements for the Safety of Peritoneal Dialysis Equipment-Incorporating Corrigendum December 1999; IEC 60601-2-39: 1999; Supersedes EN 50072: 1992 |
|
CEN EN 607 |
Eaves Gutters and Fittings Made of PVC-U - Definitions, Requirements and Testing |
|
CEN EN 60706-2 |
Maintainability of equipment Part 2: Maintainability requirements and studies during the design and development phase-IEC 60706-2:2006 |
|
CEN EN 60706-3 |
Maintainability of equipment Part 3: Verification and collection, analysis and presentation of data-IEC 60706-3:2006 |
|
CENELEC EN 60865-1 |
Short-Circuit Currents - Calculation of Effects Part 1: Definitions and Calculation Methods (IEC 865-1 : 1993) |
|
CENELEC EN 61160 |
Design review-IEC 61160: 2005 |
|
CENELEC EN 61236 |
Saddles, Pole Clamps (Stick Clamps) and Accessories for Live Working-IEC 61236:1993, Modified |
|
CENELEC EN 61265 |
Electroacoustics Instruments for Measurement of Aircraft Noise Performance Requirements for Systems to Measure One-Third-Octave Band Sound Pressure Levels in Noise Certification of Transport-Category Aeroplanes (IEC 1265 : 1995) |
|
CENELEC EN 61340-5-2 |
Electrostatics - Part 5-2: Protection of Electronic Devices from Electrostatic Phenomena - User Guide-IEC 61340-5-2:1999 |
|
CENELEC EN 61672-3 |
Electroacoustics - Sound level meters Part 3: Periodic tests |
|
CENELEC EN 61966-6 |
Multimedia systems and equipment - Colour measurement and management Part 6: Front projection displays-IEC 61966-6:2005 |
|
CENELEC EN 62056-21 |
Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control Part 21: Direct Local Data Exchange-Supersedes EN 61107: 1996 |
|
CEN EN 928 |
In Vitro Diagnostic Systems - Guidance on the Application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for in Vitro Diagnostic Medical Devices |
|
CEN EN 934-3 |
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling-Incorporating Corrigendum: May, 2005 |
|
CEN EN ISO 10075-1 |
Ergonomic Principles Related to Mental Work-Load - Part 1: General Terms and Definitions-ISO 10075:1991 |
|
CEN EN ISO 10075-2 |
Ergonomic principles related to mental workload Part 2: Design principles-ISO 10075-2: 1996 |
|
CEN EN ISO 10139-2 |
Dentistry - Soft Lining Materials for Removable Dentures - Part 2: Materials for Long-Term Use-ISO 10139-2: 1999 |
|
CEN EN ISO 10846-1 |
Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 1: Principles and Guidelines-ISO 10846-1:1997 |
|
CEN EN ISO 11073-10101 |
Health informatics - Point-of-care medical device communication - Part 10101: Nomenclature |
|
CEN EN ISO 11145 |
Optics and Optical Instruments - Lasers and Laser-Related Equipment - Vocabulary and Symbols-ISO 11145:2006 |
|
CEN EN ISO 11204 |
Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections |
|
CEN EN ISO 11498 |
Dental Handpieces - Dental Low-Voltage Electrical Motors-ISO 11498: 1997 |
|
CEN EN ISO 11683 |
Packaging - Tactile Warnings of Danger - Requirements-ISO 11683: 1997; Supersedes EN 272: 1989 |
|
CEN EN ISO 11807-1 |
Integrated optics - Vocabulary - Part 1: Basic terms and symbols-ISO 11807-1:2001 |
|
CEN EN ISO 11981 |
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Determination of Physical Compatibility of Contact Lens Care Products with Contact Lenses-ISO 11981:1999 |
|
CEN EN ISO 13982-1 |
Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)-ISO 13982-1: 2004 |
|
CEN EN ISO 14020 |
Environmental Labels and Declarations - General Principles-ISO 14020:2000 |
|
CEN EN ISO 14021 |
Environmental Labels and Declarations - Self-Declared Environmental Claims (Type II Environmental Labelling)-ISO 14021:1999 |
|
CEN EN ISO 14816 |
Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structure-ISO 14816:2005;:2000 |
|
CEN EN ISO 15098-1 |
Dental Tweezers - Part 1: General Requirements-ISO 15098-1:2000 |
|
CEN EN ISO 15839 |
Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests |
|
CEN EN ISO 17510-1 |
Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment |
|
CEN EN ISO 5356-1 |
Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets-; ISO 5356-1:2004 |
|
CEN EN ISO 5845-1 |
Technical Drawings - Simplified Representation of the Assembly of Parts with Fasteners - Part 1: General Principles-ISO 5845-1:1995 |
|
CEN EN ISO 6410-1 |
Technical Drawings - Screw Threads and Threaded Parts - Part 1: General Conventions (ISO 6410-1 : 1993) |
|
CEN EN ISO 6412-1 |
Technical Drawings - Simplified Representation of Pipelines - Part 1: General Rules and Orthogonal Representation |
|
CEN EN ISO 6888-1 |
Microbiology of food and animal feeding stuffs Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) Part 1: Technique using Baird-Parker agar medium-Includes amendment A1: 2003; ISO 6888-1: 1999 + A1: 2003 |
|
CEN EN ISO 7396-2 |
Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems |
|
CEN EN ISO 7439 |
Copper-Bearing Ints-Uterine Contraceptive Devices - Requirements, Tests-ISO 7439:2002 |
|
CEN EN ISO 7887 |
Water Quality - Examination and Determination of Colour; (ISO 7887 : 1994) |
|
CEN EN ISO 8384 |
Ships and Marine Technology - Dredgers - Vocabulary-ISO 8384:2000 |
|
CEN EN ISO 8536-10 |
Infusion equipment for medical use - Part 10: Accessories for fluid lines for use with pressure infusion equipment-ISO 8536-10:2004 |
|
CEN EN ISO 8536-11 |
Infusion equipment for medical use - Part 11: Infusion filters for use with pressure infusion equipment-ISO 8536-11:2004 |
|
CEN EN ISO 8662-7 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 7: Wrenches, Screwdrivers and Nut Runners with Impact, Impulse or Ratchet Action-ISO 8662-7: 1997 |
|
CEN EN ISO 8785 |
Geometrical Product Specification (GPS) - Surface Imperfections - Terms, Definitions and Parameters-ISO 8785:1998 |
|
CEN EN ISO 8826-1 |
Technical Drawings - Rolling Bearings - Part 1: General Simplified Representation (ISO 8826-1 : 1989) |
|
CEN EN ISO 9241-12 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 12: Presentation of Information-ISO 9241-12:1998 |
|
CEN EN ISO 9241-17 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 17: Form-Filling Dialogues-ISO 9241-17: 1998 |
|
CEN EN ISO 9614-3 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning-ISO 9614-3:2002 |
|
CEN EN ISO 9886 |
Ergonomics - Evaluation of thermal strain by physiological measurements-ISO 9886:2004 |
|
CEN EN ISO 9921 |
Ergonomics Assessment of speech communication-ISO 9921:2003 |
|
CEN EN ISO 9963-1 |
Water Quality - Determination of Alkalinity - Part 1: Determination of Total and Composite Alkalinity (ISO 9963-1 : 1994) |
|
CEN ENV 13608-1 |
Health Informatics - Security for Healthcare Communication - Part 1: Concepts and Terminology |
|
CENELEC HD 236.5 S4 |
Methods of Measurement for Radio Transmitters - Part 5: Measurements Particular to Transmitters and Transposers for Monochrome and Colour Television |
|
CENELEC HD 323.2.14 S2 |
Basic Environmental Testing Procedures - Part 2: Tests. Test N: Change of Temperature-Superseded by EN 60068-2-14:1999 |
|
CENELEC HD 450.2 |
Hearing Aids Part 2: Hearing Aids with Automatic Gain Control- Circuits |
|
CEN CEN/TR 14633 |
Welding Working positions Comparison of current international,European and US designations |
|
CEN CEN/TR 15349 |
Hardware for furniture - Terms for extension elements and their components |
|
CEN EN 12101-3 |
Smoke and Heat Control Systems - Part 3: Specification for Powered Smoke and Heat Exhaust Ventilators |
|
CEN EN 12180 |
Non-Active Surgical Implants - Body Contouring Implants - Specific Requirements for Mammary Implants |
|
CEN EN 1218-1 |
Safety of Woodworking Machines - Tenoning Machines - Part 1: Single End Tenoning Machines with Sliding Table |
|
CEN EN 12183 |
Manually Propelled Wheelchairs - Requirements and Test Methods |
|
CEN EN 12259-1 |
Fixed firefighting systems Components for sprinkler and water spray systems Part 1: Sprinklers-Includes amendments A1:2001, A2:2004 and A3:2006 |
|
CEN EN 12259-3 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies-Includes amendments A1:2001 and A2:2005 |
|
CEN EN 12259-4 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms-Includes Amendment A1: 2001 |
|
CEN EN 1232 |
Workplace Atmospheres - Pumps for Personal Sampling of Chemical Agents - Requirements and Test Methods |
|
CEN EN 12481 |
Self Adhesive Tapes - Terminology |
|
CEN EN 12597 |
Bitumen and Bituminous Binders - Terminology |
|
CEN EN 12645 |
Pressure Gauges - Apparatus for Inspection of Pressure and/or Inflation of Tyres for Motor Vehicles - Metrology, Requirements and Testing |
|
CEN EN 12736 |
Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level |
|
CEN EN 12792 |
Ventilation for buildings Symbols, terminology and graphical symbols-Supersedes CR 12792: 1997 |
|
CEN EN 12859 |
Gypsum Blocks - Definitions, Requirements and Test Methods-Includes amendment A1:2004 |
|
CEN EN 12873-3 |
Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins |
|
CEN EN 12941 |
Respiratory Protective Devices - Powered Filtering Devices Incorporating a Helmet or a Hood - Requirements, Testing, Marking-; Includes Amendment A1: 2003 |
|
CEN EN 13060 |
Small steam sterilizers |
|
CEN EN 13146-6 |
Railway Applications - Track - Test Methods for Fastening Systems - Part 6: Effect of Severe Environmental Conditions |
|
CEN EN 13274-1 |
Respiratory Protective Devices - Methods of Test - Part 1: Determination of Inward Leakage and Total Inward Leakage |
|
CEN EN 13290-1 |
Space Project Management - General Requirements - Part 1: Policy and Principles |
|
CEN EN 1330-10 |
Non-destructive testing - Terminology - Part 10: Terms used in visual testing |
|
CEN EN 1330-9 |
Non-Destructive Testing - Terminology - Part 9: Terms Used in Acoustic Emission Testing |
|
CEN EN 13318 |
Screed Materials and Floor Screeds - Definitions |
|
CEN EN 13477-2 |
Non-Destructive Testing - Acoustic Emission - Equipment Characterization - Part 2: Verification of Operating Characteristic |
|
CEN EN 13501-3 |
Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers |
|
CEN EN 13532 |
General Requirements for in Vitro Diagnostic Medical Devices for Self-Testing |
|
CEN EN 13544-1 |
Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
|
CEN EN 13593 |
Packaging - Paper sacks for household waste collection - Types, requirements and test methods |
|
CEN EN 13773 |
Textiles and textile products Burning behaviour Curtains and drapes Classification scheme |
|
CEN EN 1380 |
Timber Structures - Test Methods - Load Bearing Nailed Joints |
|
CEN EN 13824 |
Sterilization of medical devices - Aseptic processing of liquid medical devices - Requirements |
|
CEN EN 13850 |
Postal service - Quality of service - Measurement of the transit time of end-to end-services for single piece priority mail and first class mail-Incorporates Amendment 1: 2007 |
|
CEN EN 13922 |
Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels |
|
CEN EN 13965-2 |
Characterization of waste - Terminology - Part 2: Management related terms and definitions |
|
CEN EN 14046 |
Packaging Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions Method by analysis of released carbon dioxide |
|
CEN EN 14375 |
Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing |
|
CEN EN 14487-1 |
Sprayed concrete - Part 1: Definitions, specifications and conformity |
|
CEN EN 14534 |
Postal services - Quality of service - Measurement of the transit time of end-to-end services for bulk mail-Incorporates Amendment A1: 2007 |
|
CEN EN 14718 |
Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method |
|
CEN EN 14806 |
Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test |
|
CEN EN 1483 |
Water quality - Determination of mercury - Method using atomic absorption spectrometry |
|
CEN EN 14852 |
Aerosol containers Determination of the ignition distance of the spray jet |
|
CEN EN 14853 |
Aerosol containers Enclosed space ignition test |
|
CEN EN 15090 |
Footwear for firefighters |
|
CEN EN 15182-2 |
Hand-held branchpipes for fire service use - Part 2: Combination branchpipes PN 16 |
|
CEN EN 15317 |
Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment |
|
CEN EN 1915-3 |
Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction |
|
CEN EN 2000 |
Quality Assurance EN Aerospace Products Approval of the Quality System of Manufacturers |
|
CEN EN 235 |
Wallcoverings - Vocabulary and Symbols |
|
CEN EN 29092 |
Textiles - Nonwovens - Definition |
|
CEN EN 305 |
Heat Exchangers - Definitions of Performance of Heat Exchangers and the General Test Procedures for Establishing Perfomance of All Heat Exchangers |
|
CEN EN 358 |
Personal Protective Equipment for Work Positioning and Prevention of Falls from a Height - Belts for Work Positioning and Restraint and Work Positioning Lanyards |
|
CEN EN 381-5 |
Protective Clothing for Users of Hand-Held Chain Saws Part 5: Requirements for Leg Protectors |
|
CENELEC EN 50131-1 |
Alarm systems - Intrusion and hold-up systems Part 1: System requirements |
|
CENELEC EN 50131-5-3 |
Alarm systems - Intrusion systems Part 5-3: Requirements for interconnections equipment using radio frequency techniques |
|
CENELEC EN 50147-1 |
Anechoic Chambers Part 1: Shield Attenuation Measurement |
|
CENELEC EN 50267-2-1 |
Common Test Methods for Cables under Fire Conditions - Tests on Gases Evolved During Combustion of Materials from Cables - Part 2-1: Procedures - Determination of the Amount of Halogen Acid Gas |
|
CENELEC EN 50267-2-3 |
Common Test Methods for Cables under Fire Conditions - Tests on Gases Evolved During Combustion of Materials from Cables - Part 2-3: Procedures - Determination of Degree of Acidity of Gases for Cables by Determination of the Weighted Average of pH and Conductivity-Partly Supersedes HD 602 S1:1992 |
|
CENELEC EN 50291 |
Electrical Apparatus for the Detection of Carbon Monoxide in Domestic Premises - Test Methods and Performance Requirements |
|
CENELEC EN 50420 |
Basic standard for the evaluation of human exposure to electromagnetic fields from a stand alone broadcast transmitter (30 MHz - 40 GHz) |
|
CEN EN 583-4 |
Non-destructive testing Ultrasonic examination Part 4: Examination for discontinuities perpendicular to the surface-Includes Amendment A1:2003 |
|
CENELEC EN 60068-2-40 |
Environmental Testing Part 2: Tests - Test Z/AM: Combined Cold/Low Air Pressure Tests-Supersedes HD 323.2.40 S1:1988; IEC 60068-2-40:1976 + A1:1983 |
|
CENELEC EN 60068-5-2 |
Environmental Testing Part 5: Guide to Drafting of Test Methods Terms and Definitions-IEC 60068-5-2: 1990 |
|
CENELEC EN 60216-4-2 |
Electrical Insulating Materials - Thermal Endurance Properties Part 4-2: Ageing Ovens - Precision Ovens for Use up to 300 Degrees Celsius-IEC 60216-4-2:2000 |
|
CENELEC EN 60243-3 |
Electric Strength of Insulating Materials - Test Methods - Part 3: Additional Requirements for 1,2/50 US Impulse Tests-IEC 60243-3:2001 |
|
CENELEC EN 60300-3-1 |
Dependability management Part 3-1: Application guide Analysis techniques for dependability Guide on methodology-IEC 60300-3-1:2003 |
|
CENELEC EN 60300-3-12 |
Dependability management Part 3-12: Application guide - Integrated logistic support-IEC 60300-3-12:2001 |
|
CENELEC EN 60335-2-4 |
Household and similar electrical appliances - Safety Part 2-4: Particular requirements for spin extractors-Includes Amendment A1:2004 and A2:2006; IEC 60335-2-4:2002; Incorporates Corrigendum June 2006 |
|
CENELEC EN 60336 |
Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Characteristics of focal spots-IEC 60336:2005 |
|
CENELEC EN 60601-2-23 |
Medical Electrical Equipment Part 2: Particular Requirements for the Safety, Including Essential Performance, of Transcutaneous Partial Pressure Monitoring Equipment-IEC 60601-2-23:1999 |
|
CENELEC EN 60601-2-36 |
Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Equipment for Extracorporeally Induced Lithotripsy-IEC 60601-2-36: 1997 |
|
CENELEC EN 60601-2-40 |
Medical Electrical Equipment Part 2-40: Particular Requirements for the Safety of Electromyographs and Evoked Response Equipment-IEC 60601-2-40:1998 |
|
CENELEC EN 60601-2-41 |
Medical electrial equipment Part 2-41: Particular Requirements for the Safety of Surgical Iuminaires and Luminaires for Diagnosis-IEC 60601-2-41:2000 |
|
CENELEC EN 60601-2-44 |
Medical electrical equipment Part 2-44: Particular requirements for the safety of X-ray equipment for computed tomography-Includes amendment A1:2003; IEC 60601-2-44:2001 + A1:2002 |
|
CENELEC EN 60601-2-47 |
Medical Electrical Equipment - Part 2-47: Particular Requirements for the Safety, Including Essential Performance, of Ambulatory Electrocardiographic Systems-IEC 60601-2-47:2001 |
|
CENELEC EN 60695-9-1 |
Fire Hazard Testing - Part 9-1: Surface Spread of Flame - General Guidance-IEC 60695-9-1: 2005 |
|
CENELEC EN 60704-2-4 |
Household and Similar Electrical Appliances - Test Code for the Determination of Airborne Acoustical Noise Part 2-4: Particular Requirements for Washing Machines and Spin Extractors-IEC 60704-2-4:2001 |
|
CENELEC EN 60868-0 |
Flickermeter Part 0: Evaluation of Flicker Severity (IEC 868-0:1991) |
|
CENELEC EN 60900 |
Live working Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.-IEC 60900:2004 |
|
CENELEC EN 61102 |
Measurement and Characterisation of Ultrasonic Fields Using Hydrophones in the Frequency Range 0,5 MHz to 15 MHz (IEC 1102 : 1991) |
|
CENELEC EN 61285 |
Industrial-process control - Safety of analyser houses-IEC 61285:2004 |
|
CENELEC EN 62226-1 |
Exposure to electric or magnetic fields in the low and intermediate frequency range Methods for calculating the current density and internal electric field induced in the human body Part 1: General-IEC 62226-1:2004 |
|
CENELEC EN 62226-2-1 |
Exposure to electric or magnetic fields in the low and intermediate frequency range Methods for calculating the current density and internal electric field induced in the human body Part 2-1: Exposure to magnetic fields 2D models-IEC 62226-2-1:2004 |
|
CEN EN 657 |
Thermal spraying - Terminology, classification |
|
CEN EN 689 |
Workplace Atmospheres - Guidance for the Assessment of Exposure by Inhalation to Chemical Agents for Comparison with Limit Values and Measurement Strategy |
|
CEN EN 813 |
Personal Protective Equipment for Prevention of Falls from a Height - Sit Harnesses |
|
CEN EN 844-12 |
Round and Sawn Timber - Terminology - Part 12: Additional Terms and General Index |
|
CEN EN 960 |
Headforms for Use in the Testing of Protective Helmets |
|
CEN EN ISO 10079-2 |
Medical Suction Equipment - Part 2: Manually Powered Suction Equipment-ISO 10079-2 : 1999 |
|
CEN EN ISO 10272-1 |
Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 1: Detection method-ISO 10272-1: 2006 |
|
CEN EN ISO 10846-4 |
Acoustics and vibration - Laboratory measurement of vibroacoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion-ISO 10846-4:2003 |
|
CEN EN ISO 10939 |
Ophthalmic Instruments - Slit-Lamp Microscopes |
|
CEN EN ISO 11064-6 |
Ergonomic design of control centres - Part 6: Environmental requirements for control centres-ISO 11064-6:2005 |
|
CEN EN ISO 11192 |
Small craft - Graphical symbols-ISO 11192:2005 |
|
CEN EN ISO 11553-1 |
Safety of machinery - Laser processing machines - Part 1: General safety requirements-ISO 11553-1:2005; Supersedes EN 12626:1997 |
|
CEN EN ISO 11980 |
Ophthalmic Optics - Contact Lenses and Contact Lens Care Products - Guidance for Clinical Investigations-ISO 11980:1997 |
|
CEN EN ISO 13406-1 |
Ergonomic Requirements for Work with Visual Display Based on Flat Panels - Part 1: Introduction-ISO 13406-1:1999 |
|
CEN EN ISO 14031 |
Environmental Management - Environmental Performance Evaluation - Guidelines-ISO 14031:1999 |
|
CEN EN ISO 14889 |
Ophthalmic Optics - Spectacle Lenses - Fundamental Requirements for Uncut Finished Lenses-ISO 14889: 2003 |
|
CEN EN ISO 15027-3 |
Immersion Suits - Part 3: Test Methods-ISO 15027-3: 2002 |
|
CEN EN ISO 15367-1 |
Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects-ISO 15367-1: 2003 |
|
CEN EN ISO 15536-2 |
Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems |
|
CEN EN ISO 15667 |
Acoustics - Guidelines for Noise Control by Enclosures and Cabins-ISO 15667:2000 |
|
CEN EN ISO 15883-3 |
Washer-disinfectors - Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers |
|
CEN EN ISO 16000-1 |
Indoor air Part 1: General aspects of sampling strategy-ISO 16000-1:2004 |
|
CEN EN ISO 17294-1 |
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines |
|
CEN EN ISO 18369-4 |
Ophthalmic optics - Contact lenses - Part 4: Physicochemical properties of contact lens materials-Supersedes EN ISO 10339:1999, EN ISO 10340:1996, EN ISO 11984:1999, EN ISO 9913-1:1998, EN ISO 9913-2:2000, EN ISO 9914:1996 |
|
CEN EN ISO 20346 |
Personal protective equipment - Protective footwear-Incorporating Amendment 1: 2007; Incorporating corrigendum February 2007 |
|
CEN EN ISO 22523 |
External limb prostheses and external orthoses - Requirements and test methods-ISO 22523:2006 |
|
CEN EN ISO 3098-5 |
Technical Product Documentation - Lettering Part 5: CAD Lettering of the Latin Alphabet, Numerals and Marks-ISO 3098-5:1997 |
|
CEN EN ISO 3382 |
Acoustics - Measurement of the Reverberation Time of Rooms with Reference to Other Acoustical Parameters-ISO 3382: 1997 |
|
CEN EN ISO 6412-2 |
Technical Drawings - Simplified Representation of Pipelines - Part 2: Isometric Projection (ISO 6412-2 : 1989) |
|
CEN EN ISO 6940 |
Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens-ISO 6940:2004 |
|
CEN EN ISO 7886-1 |
Sterile Hypodermic Syringes for Single Use - Part 1: Syringes for Manual Use-ISO 7886-1: 1993, Including Technical Corrigendum 1: 1995 |
|
CEN EN ISO 9887 |
Water Quality - Evaluation of the Aerobic Biodegradability of Organic Compounds in an Aqueous Medium - Semi- Continuous Activated Sludge Method (SCAS) (ISO 9887:1992) |
|
CEN ENV 12017 |
Medical Informatics - Medical Informatics Vocabulary (MIVoc) |
|
CEN ENV 13106 |
Road Transport and Traffic Telematics - DATEX Traffic and Travel Data Dictionary (Version 3.1a) |
|
CENELEC ENV 50166-2 |
Human Exposure to Electromagnetic Fields High Frequency : (10 kHz to 300 GHz) |
|
CENELEC HD 142 S2 |
Terms and Definitions for Printed Circuits |
|
CENELEC HD 236.10 S1 |
Methods of Measurement for Radio Transmitters - Part 10: Methods of Measurement for Television Transmitters and Transposers Employing Insertion Test Signals |
|
CENELEC HD 236.12.2 S1 |
Methods of Measurements for Radio Transmitters Part 12: Guideline for Drawing up Descriptive Leaflets for Transmitters and Transposers for Sound and Television Broadcasting Specification Sheets |
|
CENELEC HD 236.3 |
Methods of Measurement for Radio Transmitters Part 3: Wanted and Unwanted Modulation |
|
CENELEC HD 236.8 S2 |
Methods of Measurement for Radio Transmitters - Part 8: Vestigial- Sideband Demodulators for use in Conjunction with Transmitters or Transposers for Monochrome or Colour Television |
|
CENELEC HD 323.2.56 S1 |
Basic Environmental Testing Procedures Part 2: Tests Test Cb; Damp Heat, Steady State, Primarily for Equipment |
|
CENELEC HD 323.3.3 S1 |
Environmental Testing Part 3: Guidance - Seismic Test Methods for Equipments |
|
CENELEC HD 384.2 |
International Electrotechnical Vocabulary Chapter 826: Electrical Installations of Buildings |
|
CENELEC HD 459 S2 |
Industrial Platinum Resistance Thermometer Sensors |
|
CEN CEN/TR 14589 |
Characterization of waste State of the art document Chromium VI specification in solid matrices |
|
CEN CEN/TR 15310-3 |
Characterization of waste - Sampling of waste materials - Part 3: Guidance on procedures for sub-sampling in the field |
|
CEN CEN/TS 14793 |
Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method |
|
CENELEC CLC/TR 50427 |
Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation - Guide |
|
CENELEC CLC/TS 50131-2-2 |
Alarm systems - Intrusion systems Part 2-2: Requirements for passive infrared detectors |
|
CENELEC CLC/TS 50131-2-3 |
Alarm systems - Intrusion systems Part 2-3: Requirements for microwave detectors |
|
CEN EN 1094-1 |
Insulating Refactory Products - Part 1: Terminology for Ceramic Fibre Products |
|
CEN EN 12258-3 |
Aluminium and aluminium alloys Terms and definitions Part 3: Scrap |
|
CEN EN 12466 |
Resilient Floor Coverings - Vocabulary |
|
CEN EN 12470-5 |
Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device) |
|
CEN EN 12584 |
Imperfections in Oxyfuel Flame Cuts, Lazer Beam Cuts and Plasma Cuts - Terminology |
|
CEN EN 12729 |
Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A |
|
CEN EN 1276 |
Chemical Disinfectants and Antiseptics - Quantitative Suspension Test for the Evaluation of Bactericidal Activity of Chemical Disinfectants and Antiseptics Used in Food, Industrial, Domestic, and Institutional Areas - Test Method and Requirements (Phase 2, Step 1) |
|
CEN EN 12881-1 |
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
|
CEN EN 13083 |
Tanks for Transport of Dangerous Goods - Service Equipment for Tanks - Adapter for Bottom Loading and Unloading |
|
CEN EN 13143 |
Metallic and other inorganic coatings Definitions and conventions concerning porosity |
|
CEN EN 1317-5 |
Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems |
|
CEN EN 13185 |
Non-Destructive Testing - Leak Testing - Tracer Gas Method-Amendment A1: December 2003 |
|
CEN EN 13192 |
Non Destructive Testing - Leak Testing - Calibration of Reference Leaks for Gases |
|
CEN EN 13248 |
Cookware Coffee makers for domestic use with an independent heat source Definitions, requirements and test methods |
|
CEN EN 1325-1 |
Value Management, Value Analysis and Functional Analysis Vocabulary - Part 1: Value Analysis and Functional Analysis |
|
CEN EN 13274-2 |
Respiratory Protective Devices - Methods of Test - Part 2: Practical Performance Tests |
|
CEN EN 13360 |
Rubber- or plastics-coated fabrics Terminology |
|
CEN EN 13444-1 |
Electrically Propelled Road Vehicles - Measurement of Emissions of Hybrid Vehicles - Part 1: Thermal Electric Hybrid Vehicles |
|
CEN EN 13485 |
Thermometers for Measuring the Air and Product Temperature for the Transport, Storage and Distribution of Chilled, Frozen, Deep-Frozen/Quick-Frozen Food and Ice Cream - Tests, Performance, Suitability |
|
CEN EN 13523-10 |
Coil Coated Metals - Test Methods - Part 10: Resistance to Fluorescent UV Light and Water Condensation |
|
CEN EN 136 |
Respiratory Protective Devices - Full Face Masks - Requirements, Testing, Marking-Supersedes EN 136-10:1992 |
|
CEN EN 1366-1 |
Fire Resistance Tests for Service Installations - Part 1: Ducts |
|
CEN EN 1366-3 |
Fire resistance tests for service installations - Part 3: Penetration seals |
|
CEN EN 13984 |
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics |
|
CEN EN 140:1998-C1 |
Respiratory Protective Devices - Half Masks and Quarter Masks - Requirements, Testing, Marking-Ratified European Text; Corrigendum |
|
CEN EN 1402-1 |
Unshaped refractory products Part 1: Introduction and classification-Supersedes ENV 1402-1:1994 |
|
CEN EN 14034-2 |
Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
|
CEN EN 14044 |
High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods-Incorporating Corrigendum March 2007 |
|
CEN EN 14127 |
Non-destructive testing - Ultrasonic thickness measurement |
|
CEN EN 1434-3 |
Heat Meters - Part 3: Data Exchange and Interfaces |
|
CEN EN 1438 |
Symbols for Timber and Wood-Based Products |
|
CEN EN 14593-1 |
Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 1: Apparatus with a full face mask - Requirements, testing, marking |
|
CEN EN 14605 |
Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
|
CEN EN 148-1 |
Respiratory Protective Devices - Threads for Facepieces - Part 1: Standard Thread Connection |
|
CEN EN 14851 |
Aerosol containers - Aerosol foam flammability test |
|
CEN EN 1486 |
Protective Clothing for Fire-Fighters - Test Methods and Requirements for Reflective Clothing for Specialized Fire-Fighting |
|
CEN EN 1490 |
Building Valves - Combined Temperature and Pressure Relief Valves - Tests and Requirements |
|
CEN EN 14968 |
Semantics for groundwater data interchange |
|
CEN EN 14995 |
Plastics - Evaluation of compostability - Test scheme and specifications |
|
CEN EN 1504-2 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
|
CEN EN 1518 |
Non-Destructive Testing - Leak Testing - Characterization of Mass Spectrometer Leak Detectors |
|
CEN EN 15182-3 |
Hand-held branchpipes for fire service use - Part 3: Smooth bore jet and/or one fixed spray jet angle branchpipes PN 16 |
|
CEN EN 15380-2 |
Railway applications - Designation system for railway vehicles - Part 2: Product groups |
|
CEN EN 1568-3 |
Fire Extinguishing Media - Foam Concentrates - Part 3: Specification for Low Expansion Foam Concentrates for Surface Application to Water-Immiscible Liquids |
|
CEN EN 1760-3 |
Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices |
|
CEN EN 1846-1 |
Firefighting and Rescue Service Vehicles - Part 1: Nomenclature and Designation |
|
CEN EN 1885 |
Feather and down Terms and definitions-Includes amendment A1:2003 |
|
CEN EN 1938 |
Personal Eye Protection - Goggles for Motorcycle and Moped Users |
|
CEN EN 21942-1 |
Dental Vocabulary - Part 1: General and Clinical Terms |
|
CEN EN 25580 |
Non-Destructive Testing - Industrial Radiographic Illuminators - Minimum Requirements |
|
CEN EN 26184 PART 2 |
Explosion Protection Systems - Part 2: Determination of Explosion Indices of Combustible Gases in Air (ISO 6184-2 : 1985) |
|
CEN EN 303-1 |
Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking-Includes Amendment 1: 09/2003 |
|
CEN EN 352-1 |
Hearing protectors - General requirements - Part 1: Ear-Muffs |
|
CEN EN 355 |
Personal Protective Equipment Against Falls from a Height - Energy Absorbers |
|
CEN EN 374-1 |
Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements |
|
CEN EN 455-2 |
Medical Gloves for Single Use - Part 2: Requirements and Testing for Physical Properties-Includes Amendment A1: 1998; Incorporates Corrigendum June 1996 |
|
CEN EN 459-1 |
Building lime - Part 1: Definitions, specifications and conformity criteria-Incorporating corrigendum July 2002; Supersedes ENV 459-1: 1994 |
|
CENELEC EN 50054 |
Electrical Apparatus for the Detection and Measurement of Combustible Gases General Requirements and Test Methods-Ratified European Text |
|
CENELEC EN 50133-1 |
Alarm Systems - Access Control Systems for Use in Security Applications - Part 1: System Requirements-Incorporates Corrigendum April 1998; Includes Amendment A1:2002 |
|
CEN EN 50244 |
Electrical Apparatus for the Detection of Combustible Gases in Domestic Premises - Guide on the Selection, Installation, Use and Maintenance |
|
CENELEC EN 50384 |
Product Standard to Demonstrate the Compliance of Radio Base Stations and Fixed Terminal Stations for Wireless Telecommunication Systems with the Basic Restrictions or the Reference Levels Related to Human Exposure to Radio Frequency Electromagnetic Fields (110 MHz - 40 GHz) - Occupational |
|
CEN EN 533 |
Protective Clothing - Protection Against Heat and Flame - Limited Flame Spread Materials and Material Assemblies |
|
CENELEC EN 60068-2-39 |
Environmental Testing - Part 2: Tests - Test Z/AMD: Combined Sequential Cold, Low Air Pressure and Damp Heat Test-IEC 60068-2-39: 1976; Supersedes HD 323.2.39 S1: 1988 |
|
CENELEC EN 60068-2-41 |
Environmental Testing Part 2: Tests - Test Z/BM: Combined Dry Heat/Low Air Pressure Tests-Supersedes HD 323.2.41 S1:1988; IEC 60068-2-41:1976 + A1:1983 |
|
CENELEC EN 60068-2-59 |
Environmental Testing Part 2: Test Methods Test Fe: Vibration - Sine Beat Method (IEC 68-2-59 : 1990) |
|
CENELEC EN 60068-2-65 |
Environmental Testing Part 2: Methods of Test Test Fg: Vibration, Acoustically Induced (IEC 68-2-65 : 1993) |
|
CENELEC EN 60335-2-26 |
Household and similar electrical appliances Safety Part 2-26: Particular requirements for clocks-IEC 60335-2-26:2002 |
|
CENELEC EN 60601-2-3 |
Medical electrical equipment Part 2. Particular requirements for the safety of short-wave therapy equipment-Supersedes HD 395.2.3 S1:1985; Includes amendment A1:1998; IEC 60601-2-3:1991 + A1:1998 |
|
CENELEC EN 60601-2-50 |
Medical Electrical Equipment Part 2-50: Particular Requirements for the Safety of Infant Phototherapy Equipment-IEC 60601-2-50: 2000 + Corrigendum March 2001 |
|
CENELEC EN 60601-2-8 |
Medical Electrical Equipment Part 2: Particular Requirements for the Safety of Therapeutic X-Ray Equipment Operating in the Range 10 kV to 1 MV-Includes Amendment A1: 1997; IEC 60601-2-8: 1987 + A1: 1997; Supersedes HD 395.2.8 S1: 1988 |
|
CENELEC EN 60601-2-9 |
Medical Electrical Equipment; Part 2: Particular Requirements for the Safety of Patient Contact Dosemeters Used in Radiotherapy with Electrically Connected Radiation Detectors-Incorporates Corrigendum December 1996; IEC 601-2-9: 1996 |
|
CENELEC EN 60695-6-1 |
Fire hazard testing Part 6-1: Smoke obscuration - General guidance-(IEC 60695-6-1):2005 |