|
CEN EN 13523-3 |
Coil Coated Metals - Test Methods - Part 3: Colour Difference - Instrumental Comparison |
|
CEN EN 13523-4 |
Coil Coated Metals - Test Methods - Part 4: Pencil Hardness |
|
CEN EN 13523-6 |
Coil Coated Metals - Test Methods - Part 6: Adhesion After Indentation (Cupping Test) |
|
CEN EN 13523-7 |
Coil Coated Metals - Test Methods - Part 7: Resistance to Cracking on Bending (T-Bend Test) |
|
CEN EN 13523-9 |
Coil Coated Metals - Test Methods - Part 9: Resistance to Water Immersion |
|
CEN EN 13528-3 |
Ambient air quality Diffusive samplers for the determination of concentrations of gases and vapours Requirements and test methods Part 3: Guide to selection, use and maintenance |
|
CEN EN 13546 |
Protective clothing Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers and shin protectors for field players Requirements and test methods |
|
CEN EN 13549 |
Cleaning Services - Basic Requirements and Recommendations for Quality Measuring Systems |
|
CEN EN 13610 |
Chemical disinfectants - Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and industrial areas - Test method and requirements (phase 2, step 1) |
|
CEN EN 136-10 |
Respiratory Protective Devices - Full Face Masks for Special Use - Requirements, Testing, Marking |
|
CEN EN 13619 |
Postal services Mail item processing Optical characteristics for processing letters |
|
CEN EN 13624 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants for instruments used in the medical area - Test method and requirements (phase 2, step 1) |
|
CEN EN 1364-2 |
Fire Resistance Tests for Non-Loadbearing Elements - Part 2: Ceilings |
|
CEN EN 1364-4 |
Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration |
|
CEN EN 13649 |
Stationary Source Emissions - Determination of the Mass Concentration of Individual Gaseous Organic Compounds - Activated Carbon and Solvent Desorption Method |
|
CEN EN 1365-1 |
Fire Resistance Tests for Loadbearing Elements - Part 1: Walls |
|
CEN EN 1365-3 |
Fire Resistance Tests for Loadbearing Elements - Part 3: Beams |
|
CEN EN 1365-4 |
Fire Resistance Tests for Loadbearing Elements - Part 4: Columns |
|
CEN EN 1366-8 |
Fire resistance tests for service installations - Part 8: Smoke extraction ducts |
|
CEN EN 13724 |
Postal services Apertures of private letter boxes and letter plates Requirements and test methods |
|
CEN EN 13725 |
Air quality - Determination of odour concentration by dynamic olfactometry-Including Corrigendum January 2006 |
|
CEN EN 13726-1 |
Test Methods for Primary Wound Dressings - Part 1: Aspects of Absorbency |
|
CEN EN 13726-2 |
Test Methods for Primary Wound Dressings - Part 2: Moisture Vapour Transmission Rate of Permeable Film Dressings |
|
CEN EN 13792 |
Colour coding of taps and valves for use in laboratories |
|
CEN EN 13795-2 |
Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - Part 2: Test methods |
|
CEN EN 13798 |
Hydrometry - Specification for a reference raingauge pit |
|
CEN EN 1381 |
Timber Structures - Test Methods - Load Bearing Stapled Joints |
|
CEN EN 13819-2 |
Hearing protectors - Testing - Part 2: Acoustic test methods |
|
CEN EN 13832-1 |
Footwear protecting against chemicals Part 1: Terminology and test methods |
|
CEN EN 13860-1 |
Non destructive testing - Eddy current examination - Equipment characteristics and verification - Part 1: Instrument characteristics and verification |
|
CEN EN 13868 |
Catheters - Test Methods for Kinking of Single Lumen Catheters and Medical Tubing |
|
CEN EN 13920-6 |
Aluminium and aluminium alloys Scrap Part 6: Scrap consisting of two or more wrought alloys |
|
CEN EN 13925-1 |
Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 1: General principles |
|
CEN EN 13959-2 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 2: Test method for determination of impact abrasion resistance |
|
CEN EN 1399 |
Resilient Floor Coverings - Determination of Resistance to Stubbed and Burning Cigarettes |
|
CEN EN 14011 |
Water quality - Sampling of fish with electricity |
|
CEN EN 14052 |
High performance industrial helmets |
|
CEN EN 14115 |
Textiles - Burning of Materials for Maquees, Large Tents and Related Products - Ease of Ignition |
|
CEN EN 14153-1 |
Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 1: Level 1 - Supervised Diver |
|
CEN EN 142 |
Respiratory Protective Devices - Mouthpiece Assemblies - Requirements, Testing, Marking |
|
CEN EN 14211 |
Ambient air quality - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
|
CEN EN 14299 |
Non active surgical implants - Particular requirements for cardiac and vascular implants - Specific requirements for arterial stents |
|
CEN EN 14325 |
Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages |
|
CEN EN 144-2 |
Respiratory Protective Devices - Gas Cylinder Valves - Part 2: Outlet Connections-Ratified European Text |
|
CEN EN 14452 |
Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B |
|
CEN EN 14454 |
Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A |
|
CEN EN 14462 |
Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 |
|
CEN EN 14467 |
Recreational diving services - Requirements for recreational scuba diving service providers |
|
CEN EN 145 |
Respiratory Protective Devices - Self-Contained Closed-Circuit Breathing Apparatus Compressed Oxygen or Compressed Oxygen-Nitrogen Type - Requirements, Testing, Marking-Includes Amendment A1:2000; Supersedes EN 145-2:1992 |
|
CEN EN 14522 |
Determination of the auto ignition temperature of gases and vapours |
|
CEN EN 14540 |
Fire-fighting hoses - Non-percolating layflat hoses for fixed systems-Incorporating Amendment A1: 04/2007 |
|
CEN EN 14571 |
Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method |
|
CEN EN 14572 |
High Performance Helmets for Equestrian Activities |
|
CEN EN 14591-2 |
Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers |
|
CEN EN 14591-4 |
Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers |
|
CEN EN 14593-2 |
Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking |
|
CEN EN 14597 |
Temperature control devices and temperature limiters for heat generating systems |
|
CEN EN 14615 |
Postal services - Digital postage marks - Applications, security and design |
|
CEN EN 14652 |
Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing-Incorporates Amendment A1:6/2007 |
|
CEN EN 14662-2 |
Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography |
|
CEN EN 14671 |
Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride |
|
CEN EN 14701-3 |
Characterization of sludges - Filtration properties - Part 3: Determination of the compressibility |
|
CEN EN 14710-2 |
Fire-fighting pumps Fire-fighting centrifugal pumps without primer Part 2: Verification of general and safety requirements |
|
CEN EN 14717 |
Welding and allied processes - Environmental check list |
|
CEN EN 14757 |
Water quality - Sampling of fish with multi-mesh gillnets |
|
CEN EN 14786 |
Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test |
|
CEN EN 14791 |
Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method |
|
CEN EN 14797 |
Explosion venting devices |
|
CEN EN 148-2 |
Respiratory Protective Devices - Threads for Facepieces - Part 2: Centre Thread Connection |
|
CEN EN 1484 |
Water Analysis - Guidelines for the Determination of Total Organic Carbon (TOC) and Dissolved Organic Carbon (DOC) |
|
CEN EN 14873-1 |
Furniture removal activities - Storage of furniture and personal effects for private individuals - Part 1: Specification for the storage facility and related storage provision |
|
CEN EN 1489 |
Building Valves - Pressure Safety Valves - Tests and Requirements |
|
CEN EN 14897 |
Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing-Incorporates Amendment A1: June 2007 |
|
CEN EN 14907 |
Ambient air quality Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter |
|
CEN EN 14916 |
Domestic cookware - Graphical symbols (pictograms) |
|
CEN EN 14944-3 |
Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementititous products |
|
CEN EN 15042-2 |
Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2: Guide to the thickness measurement of coatings by photothermic method |
|
CEN EN 15221-2 |
Facility Management - Part 2: Guidance on how to prepare Facility Management agreements |
|
CEN EN 15343 |
Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
|
CEN EN 15345 |
Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
|
CEN EN 15495 |
Non Destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources |
|
CEN EN 1622 |
Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN) |
|
CEN EN 1634-3 |
Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 3: Smoke control test for door and shutter assemblies-Incorporating corrigendum May 2006 |
|
CEN EN 1639 |
Dentistry - Medical devices for dentistry - Instruments |
|
CEN EN 1707 |
Conical Fittings with a 6% (Luer) Taper for Syringes, Needles and Certain Other Medical Equipment - Lock Fittings |
|
CEN EN 1731 |
Personal eye protection - Mesh eye and face protectors |
|
CEN EN 1837 |
Safety of Machinery - Integral Lighting of Machines |
|
CEN EN 1846-3 |
Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance |
|
CEN EN 1866-1 |
Mobile fire extinguishers - Part 1: Characteristics, performance and test methods |
|
CEN EN 1869 |
Fire Blankets |
|
CEN EN 1911-1 |
Stationary Source Emissions - Manual Method of Determination of HCI - Part 1: Sampling of Gases |
|
CEN EN 2 |
Classification of Fires |
|
CEN EN 25663 |
Water Quality - Determination of Kjeldahl Nitrogen - Method After Mineralization with Selenium (ISO 5663 : 1984) |
|
CEN EN 270:1994/A1 |
AMD 1 Respiratory Protective Devices - Compressed Air Line Breathing Apparatus Incorporating a Hood - Requirements, Testing, Marking-Ratified European Text |
|
CEN EN 27888 |
Water Quality - Determination of Electrical Conductivity (ISO 7888 : 1985) |
|
CEN EN 28662-5 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 5: Pavement Breakers and Pick Hammers-Includes Amendments A1: 1995 and A2: 2001; ISO 8662-5: 1992 + A1: 1999 |
|
CEN EN 28960 |
Refrigerators, Frozen- Food Storage Cabinets and Food Freezers for Household and Similar Use - Measurement of Emission of Airborne Acoustical Noise (ISO 8960 : 1991) |
|
CEN EN 29168 |
Dental Handpieces - Hose Connectors (ISO 9168 : 1991) |
|
CEN EN 343 |
Protective clothing - Protection against rain-Supersedes ENV 343:1998 |
|
CEN EN 352-7 |
Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs |
|
CEN EN 381-4 |
Protective Clothing for Users of Hand-Held Chainsaws - Part 4: Test Methods for Chainsaw Protective Gloves |
|
CEN EN 402 |
Respiratory protective devices - Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking |
|
CENELEC EN 45510-2-2 |
Guide for Procurement of Power Station Equipment - Part 2-2: Electrical Equipment - Uninterruptible Power Supplies |
|
CEN EN 45510-2-3 |
Guide for Procurement of Power Station Equipment - Part 2-3: Electrical Equipment - Stationary Batteries and Chargers |
|
CEN EN 45510-2-6 |
Guide for Procurement of Power Station Equipment - Part 2-6: Electrical Equipment - Generators |
|
CEN EN 45510-4-6 |
Guide for Procurement of Power Station Equipment - Part 4: Boiler Auxiliaries - Section 6: Flue Gas Desulphurization (De-SOx) Plant |
|
CEN EN 45510-6-8 |
Guide for Procurement of Power Station Equipment - Part 6-8: Turbine Auxiliaries - Cranes |
|
CEN EN 45510-6-9 |
Guide for Procurement of Power Station Equipment - Part 6-9: Turbine Auxiliaries - Cooling Water Systems |
|
CEN EN 45510-7-1 |
Guide for Procurement of Power Station Equipment - Part 7-1: Pipework and Valves - High Pressure Piping Systems |
|
CEN EN 455-3 |
Medical Gloves for Single Use - Part 3: Requirements and Testing for Biological Evaluation |
|
CEN EN 458 |
Hearing Protectors - Recommendations for Selection, Use, Care and Maintenance - Guidance Document |
|
CEN EN 466 |
Protective Clothing - Protection Against Liquid Chemicals - Performance Requirements for Chemical Protective Clothing with Liquid- Tight Connections Between Different Parts of the Clothing (Type 3 Equipment) |
|
CEN EN 468 |
Protective Clothing - Protection Against Liquid Chemicals - Test Method: Determination of Resistance to Penetration by Spray (Spray Test) |
|
CENELEC EN 50055 |
Electrical Apparatus for the Detection and Measurement of Combustible Gases Performance Requirements for Group I Apparatus Indicating up to 5 % (v/v) Methane in Air-Ratified European Text |
|
CENELEC EN 50133-7 |
Alarm Systems - Access Control Systems for Use in Security Applications Part 7: Application Guideline |
|
CENELEC EN 50134-1 |
Alarm Systems - Social Alarm Systems Part 1: System Requirements |
|
CENELEC EN 50134-3 |
Alarm Systems - Social Alarm Systems Part 3: Local Unit and Controller |
|
CENELEC EN 50136-1-2 |
Alarm Systems - Alarm Transmission Systems and Equipment - Part 1-2: Requirements for Systems Using Didicated Alarm Paths |
|
CENELEC EN 50136-2-4 |
Alarm Systems - Alarm Transmission Systems and Equipment - Part 2-4: Requirements for Equipment Used in Systems with Voice Communicators Using the Public Switched Telephone Network |
|
CENELEC EN 50266-2-5 |
Common Test Methods for Cables under Fire Conditions - Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables Part 2-5: Procedures - Small Cables - Category D-Incorporating Corrigendum March 2002 |
|
CENELEC EN 50289-4-11 |
Communication Cables - Specifications for Test Methods Part 4-11: Environmental Test Methods - a Horizontal Integrated Fire Test Method |
|
CENELEC EN 50290-1-2 |
Communication cables Part 1-2: Definitions |
|
CENELEC EN 50400 |
Basic standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service |
|
CEN EN 531 |
Protective Clothing for Workers Exposed to Heat-Includes Amendment A1: 1998 |
|
CEN EN 562 |
Gas Welding Equipment - Pressure Gauges Used in Welding, Cutting and Allied Processes |
|
CEN EN 588-1 |
Fibre-Cement Pipes for Sewers and Drains - Part 1: Pipes, Joints and Fittings for Gravity Systems |
|
CENELEC EN 60010-2-02 |
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-020: Particular Requirements for Laboratory Centrifuges-Includes Amendment A1: 1996; IEC 1010-2-020, Modified |
|
CENELEC EN 60027-2 |
Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics |
|
CENELEC EN 60027-4 |
Letter symbols to be used in electric technology - Part 4: Rotating electric machines |
|
CENELEC EN 60051-4 |
Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 4: Special Requirements for Frequency Meters |
|
CENELEC EN 60051-8 |
Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 8: Special Requirements for Accessories |
|
CENELEC EN 60060-3 |
High voltage test techniques Part 3: Definitions and requirements for on-site tests-Incorporating Corrigendum October 2006 |
|
CENELEC EN 60191-3 |
Mechanical Standardization of Semiconductor Devices Part 3: General Rules for the Preparation of Outline Drawings of Integrated Circuits-IEC 60191-3:1999 |
|
CENELEC EN 60332-2-1 |
Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable Apparatus-Partially Supersedes EN 50265-1:1998 |
|
CENELEC EN 60359 |
Electrical and Electronic Measurement Equipment - Expression of Performance-IEC 60359: 2001 |
|
CENELEC EN 60406 |
Cassettes for Medical X-Ray Diagnosis Radiographic Cassettes and Mammographic Cassettes-Supersedes HD 356 S1: 1977; IEC 60406: 1997 |
|
CENELEC EN 60464-2 |
Varnishes used for electrical insulation Part 2: Methods of test-Incorporating Amendment A1: 03/2006 and Corrigendum: 12/2006 |
|
CENELEC EN 60567 |
Oil-filled electrical equipment - Sampling of gases and of oil for analysis of free and dissolved gases - Guidance-(IEC 60567):2005 |
|
CENELEC EN 60601-2-20 |
Medical Electrical Equipment; Part 2: Particular Requirements for the Safety of Transport Incubators-Supersedes HD 395.2.19 S1: 1992; IEC 601-2-20: 1990 + A1 : 1996 |
|
CENELEC EN 60613 |
Electrical, Thermal and Loading Characteristics of Rotating Anode X-Ray Tubes for Medical Diagnosis |
|
CENELEC EN 60627 |
Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographic anti-scatter grids-IEC 60627: 2001; Incorporating Corrigendum August 2002 |
|
CENELEC EN 60641-3-2 |
Specification for Pressboard and Presspaper for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Requirements for Presspaper, Types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1 (IEC 641-3-2:1992) |
|
CENELEC EN 60645-1 |
Electroacoustics - Audiological Equipment Part 1: Pure-Tone Audiometers-IEC 60645-1:2001 |
|
CENELEC EN 60704-2-9 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2-9: Particular requirements for electric hair care appliances-IEC 60704-2-9: 2003 |
|
CENELEC EN 60832 |
Insulating Poles (Insulating Sticks) and Universal Tool Attachments (Fittings) for Live Working-IEC 832: 1988, Modified; Supersedes HD 542 S1: 1990 |
|
CENELEC EN 60855 |
Insulating foam-filled tubes and solid rods for live working-IEC 60855:1985, modified; Supersedes HD 496 S1:1988 |
|
CENELEC EN 60868 |
Flickermeter - Functional and Design Specifications (IEC 868 : 1986 + A1 : 1990) |
|
CENELEC EN 60903 A11 |
Specification for Gloves and Mitts of Insulating Material for Live Working-Includes Amendment A11: 1997; IEC 903: 1988, Modified |
|
CENELEC EN 61012 |
Filters for the Measurement of Audible Sound in the Presence of Ultrasound-IEC 61012: 1990 |
|
CENELEC EN 61061-3-2 |
Non-Impregnated Densified Laminated Wood for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 2: Sheets Produced from Beech Veneer-IEC 61061-3-2:2001 |
|
CENELEC EN 61083-1 |
Instruments and Software Used for Measurement in High-Voltage Impulse Tests - Part 1: Requirements for Instruments-IEC 61083-1:2001; Supersedes HD 479 S1: 1986 |
|
CENELEC EN 61094-5 |
Measurement Microphones Part 5: Methods for Pressure Calibration of Working Standard Microphones by Comparison-IEC 61094-5: 2001 |
|
CENELEC EN 61125 |
Unused hydrocarbon-based insulating liquids Test methods for evaluating the oxidation stability-Includes amendment A1:2004; Supersedes HD 486 S1:1987 |
|
CENELEC EN 61161 |
Ultrasonics - Power measurement - Radiation force balances and performance requirements |
|
CENELEC EN 61205 |
Ultrasonics - Dental Descaler Systems Measurement and Declaration of the Output Characteristics (IEC 1205 : 1993) |
|
CENELEC EN 61267 |
Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of characteristics-IEC 61267: 2005 |
|
CENELEC EN 61340-3-1 |
Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms |
|
CENELEC EN 61355 |
Classification and Designation of Documents for Plants, Systems and Equipment-IEC 61355: 1997 |
|
CENELEC EN 61478 |
Live Working - Ladders of Insulating Material-Including Amendment A1: 2003; IEC 61478: 2001 |
|
CENELEC EN 61788-8 |
Superconductivity Part 8: AC loss measurements - Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method-IEC 61788-8:2003 |
|
CENELEC EN 62053-11 |
Electricity metering equipment (a.c.) Particular requirements Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)-Supersedes EN 60521: 1995; IEC 62053-11:2003 |
|
CEN EN 671-3 |
Fixed Firefighting Systems - Hose Systems - Part 3: Maintenance of Hose Reels with Semi-Rigid Hose and Hose Systems with Lay-Flat Hose |
|
CEN EN 694 |
Fire-Fighting Hoses - Semi-Rigid Hoses for Fixed Systems-incorporates amendment a1: 4/2007 |
|
CEN EN 737-4 |
Medical Gas Pipeline Systems - Part 4: Terminal Units for Anaesthetic Gas Scavenging Systems - Basic Requirements |
|
CEN EN 738-2 |
Pressure Regulators for Use with Medical Gases Part 2: Manifold and Line Pressure Regulators |
|
CEN EN 738-4 |
Pressure regulators for use with medical gases - Part 4: Low-pressure regulators intended for incorporation into medical equipment-Includes Amendment A1: 2002 |
|
CEN EN 752-5 |
Drain and sewer systems outside buildings - Part 5: Rehabilitation |
|
CENELEC EN 81714-3 |
Design of Graphical Symbols for Use in the Technical Documentation of Products Part 3: Classification of Connect Nodes, Networks and Their Encoding-IEC 81714-3:1998 |
|
CEN EN 844-1 |
Round and Sawn Timber - Terminology - Part 1: General Terms Common to Round Timber and Sawn Timber |
|
CEN EN 844-5 |
Round and Sawn Timber - Terminology - Part 5: Terms Relating to Dimensions of Round Timber |
|
CEN EN 858-2 |
Separator systems for light liquids (e.g. oil and petrol) - Part 2: Selection of nominal size, installation, operation and maintenance |
|
CEN EN 867-3 |
Non-Biological Systems for Use in Sterilizers - Part 3: Specification for Class B Indicators for Use in the Bowie and Dick Test |
|
CEN EN ISO 10209-2 |
Technical Product Documentation - Vocabulary - Part 2: Terms Relating to Projection Methods (ISO 10209-2 : 1993) |
|
CEN EN ISO 10271 |
Dental Metallic Materials - Corrosion Test Methods-ISO 10271:2001 |
|
CEN EN ISO 10322-1 |
Ophthalmic Optics - Semi-Finished Spectacle Lens Blanks - Part 1: Specifications for Single-Vision and Multifocal Lens Blanks-ISO 10322-1: 2006 |
|
CEN EN ISO 10628 |
Flow Diagrams for Process Plants - General Rules-ISO 10628: 1997 |
|
CEN EN ISO 10650-1 |
Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps-ISO 10650-1: 2004 |
|
CEN EN ISO 10712 |
Water Quality - Pseudomonas Putida Growth Inhibition Test (Pseudomonas Cell Multiplication Inhibition Test)-ISO 10712:1995 |
|
CEN EN ISO 11091 |
Construction Drawings - Landscape Drawing Practice-ISO 11091:1994 |
|
CEN EN ISO 11161 |
Safety of machinery - Integrated manufacturing systems - Basic requirements |
|
CEN EN ISO 11593 |
Manipulating Industrial Robots - Automatic End Effector Exchange Systems - Vocabulary and Presentation of Characteristics-ISO 11593: 1996 |
|
CEN EN ISO 11608-2 |
Pen-Injectors for Medical Use - Part 2: Needles - Requirements and Test Methods-ISO 11608-2: 2000 |
|
CEN EN ISO 11608-3 |
Pen-Injectors for Medical Use - Part 3: Finished Cartridges - Requirements and Test Methods-ISO 11608-3: 2000 |
|
CEN EN ISO 11609 |
Dentistry - Toothpastes - Requirements, Test Methods and Marking-ISO 11609:1995 |
|
CEN EN ISO 11691 |
Acoustics - Measurement of Insertion Loss of Ducted Silencers without Flow - Laboratory Survey Method-ISO 11691:1995 |
|
CEN EN ISO 11721-2 |
Textiles - Determination of the resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish-ISO 11721:2003 |
|
CEN EN ISO 11819-1 |
Acoustics - Measurement of the Influence of Road Surface on Traffic Noise - Part 1: Statistics Pass-by Method-ISO 11819-1:1997 |
|
CEN EN ISO 11979-4 |
Ophthalmic Implants - Intraocular Lenses - Part 4: Labelling and Information-ISO 11979-4:2000 |
|
CEN EN ISO 12085 |
Geometrical Product Specification (GPS) - Surface Texture: Profile Method - Motif Parameters-ISO 12085: 1996 |
|
CEN EN ISO 12866 |
Ophthalmic Instruments - Perimeters-ISO 12866: 1999 |
|
CEN EN ISO 12894 |
Ergonomics of the Thermal Environment - Medical Supervision of Individuals Exposed to Extreme Hot or Cold Environments-ISO 12894:2001 |
|
CEN EN ISO 13397-4 |
Periodontal Curettes, Dental Scalers and Excavators - Part 4: Dental Excavators - Discoid-Type-ISO 13397-4:1997 |
|
CEN EN ISO 13995 |
Protective Clothing - Mechanical Properties - Test Method for the Determination of the Resistance to Puncture and Dynamic Tearing of Materials-ISO 13995:2000 |
|
CEN EN ISO 14024 |
Environmental Labels and Declarations - Type I Environmental Labelling - Principles and Procedures-ISO 14024:1999 |
|
CEN EN ISO 14233 |
Dentistry Polymer-based die materials-ISO 14233:2003 |
|
CEN EN ISO 14402 |
Water Quality - Determination of Phenol Index by Flow Analysis (FIA and CFA)-ISO 14402:1999 |
|
CEN EN ISO 14403 |
Water Quality - Determination of Total Cyanide and Free Cyanide by Continuous Flow Analysis-ISO 14403: 2002 |
|
CEN EN ISO 15011-1 |
Health and Safety in Welding and Allied Processes - Laboratory Method for Sampling Fume and Gases Generated by Arc Welding - Part 1: Determination of Emission Rate and Sampling for Analysis of Particulate Fume-ISO 15011-1:2002 |
|
CEN EN ISO 15011-3 |
Health and safety in welding and allied processes Laboratory method for sampling fume and gases generated by arc welding Part 3: Determination of ozone concentration using fixed point measurements-ISO 15011-3: 2002 |
|
CEN EN ISO 15087-2 |
Dental Elevators - Part 2: Warwick James Elevators-ISO 15087-2:2000 |
|
CEN EN ISO 15087-5 |
Dental Elevators - Part 5: Bein Elevators-ISO 15087-5: 2000 |
|
CEN EN ISO 15212-2 |
Oscillation-Type Density Meters - Part 2: Process Instruments for Homogenous Liquids-ISO 15212-2: 2002 |
|
CEN EN ISO 15254 |
Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision-ISO 15254: 2002 |
|
CEN EN ISO 15378 |
Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP) |
|
CEN EN ISO 15536-1 |
Ergonomics - Computer manikins and body templates - Part 1: General requirements-ISO 15536-1:2005 |
|
CEN EN ISO 15680 |
Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption-ISO 15680:2003 |
|
CEN EN ISO 15681-1 |
Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 2: Method by continuous flow analysis (CFA)-ISO 15681-2:2003 |
|
CEN EN ISO 15744 |
Hand-Held Non-Electric Power Tools - Noise Measurement Code - Engineering Method (Grade 2)-ISO 15744: 2002 |
|
CEN EN ISO 15927-5 |
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating-ISO 15927-5: 2005 |
|
CEN EN ISO 16000-2 |
Indoor air - Part 2: Sampling strategy for formaldehyde-ISO 16000-2:2004 |
|
CEN EN ISO 16017-1 |
Indoor, Ambient and Workplace Air - Sampling and Analysis of Volatile Organic Compounds by Sorbent Tube/Thermal Desorption/Capillary Gas Chromatography - Part 1: Pumped Sampling-ISO 16017-1:2000 |
|
CEN EN ISO 16017-2 |
Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling-ISO 16017-2:2003 |
|
CEN EN ISO 16348 |
Metallic and other inorganic coatings Definitions and conventions concerning appearance-ISO 16348:2003 |
|
CEN EN ISO 16712 |
Water quality - Determination of acute toxicity of marine or estuarine sediment to amphipods-ISO 16712:2005 |
|
CEN EN ISO 1797-1 |
Dental rotary instruments - Shanks - Part 1: Shanks made of metals-Includes Amendment A1: 1999; ISO 1797-1: 1992 + A1: 1997 |
|
CEN EN ISO 18153 |
In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials-ISO 18153:2003 |
|
CEN EN ISO 18777 |
Transportable liquid oxygen systems for medical use - Particular requirements-ISO 18777:2005 |
|
CEN EN ISO 19054 |
Rail systems for supporting medical equipment-ISO 19054:2005 |
|
CEN EN ISO 19458 |
Water quality - Sampling for microbiological analysis-ISO 19458:2006 |
|
CEN EN ISO 2064 |
Metallic and Other Inorganic Coatings - Definitions and Conventions Concerning the Measurement of Thickness-ISO 2064: 1996 |
|
CEN EN ISO 20838 |
Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Requirements for amplification and detection for qualitative methods-ISO 20838: 2006 |
|
CEN EN ISO 21171 |
Medical gloves Determination of removable surface powder-ISO 21171:2006 |
|
CEN EN ISO 21469 |
Safety of machinery - Lubricants with incidental product contact - Hygiene requirements-ISO 21469:2006 |
|
CEN EN ISO 21567 |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Shigella spp.-ISO 21567:2004 |
|
CEN EN ISO 21606 |
Dentistry - Elastomeric auxiliaries for use in orthodontics |
|
CEN EN ISO 21671 |
Dentistry - Rotary polishers-ISO 21671: 2006 |
|
CEN EN ISO 22112 |
Dentistry - Artificial teeth for dental prostheses (ISO 22112:2005) |
|
CEN EN ISO 22174 |
Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - General requirements and definitions-ISO 22174:2005 |
|
CEN EN ISO 22612 |
Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration-ISO 22612:2005 |
|
CEN EN ISO 22675 |
Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methods-ISO 22675:2006 |
|
CEN EN ISO 23953-1 |
Refrigerated display cabinets - Part 1: Vocabulary-ISO 23953-1: 2005; Supersedes EN 441-1: 1994 |
|
CEN EN ISO 2922 |
Acoustics - Measurement of Airborne Sound Emitted by Vessels on Inland Waterways and Harbours-Supersedes EN 22922:1993; ISO 2922:2000 |
|
CEN EN ISO 3098-3 |
Technical Product Documentation - Lettering - Part 3: Greek Alphabet-ISO 3098-3:2000 |
|
CEN EN ISO 3098-4 |
Technical Product Documentation - Lettering Part 4: Diacritical and Particular Marks for the Latin Alphabet-ISO 3098-4:2000 |
|
CEN EN ISO 3630-1 |
Dental Root-Canal Instruments - Part 1: Files, Reamers, Barbed Broaches, Rasps, Paste Carriers, Explorers and Cotton Broaches (ISO 3630-1 : 1992) |
|
CEN EN ISO 3630-2 |
Dental Root-Canal Instruments - Part 2: Enlargers-Supersedes EN 23630-2:1991; ISO 3630-2: 2000 |
|
CEN EN ISO 389-4 |
Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 4: Reference Levels for Narrow-Band Masking Noise-ISO 389-4 : 1994 |
|
CEN EN ISO 389-5 |
Acoustics - Reference Zero for the Calibration of Audiometric Equipment - Part 5: Reference Equivalent Threshold Sound Pressure Levels for Pure Tones in the Frequency Range 8 kHz to 16 kHz |
|
CEN EN ISO 4049 |
Dentistry - Polymer-Based Filling, Restorative and Luting Materials |
|
CEN EN ISO 407 |
Small medical gas cylinders - Pin-index yoke-type valve connections-ISO 407:2004 |
|
CEN EN ISO 4788 |
Laboratory glassware - Graduated measuring cylinders-ISO 4788: 2005 |
|
CEN EN ISO 5356-2 |
Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors |
|
CEN EN ISO 5456-3 |
Technical drawings Projection methods Part 3: Axonometric representations-ISO 5456-3: 1996 |
|
CEN EN ISO 5840 |
Cardiovascular implants - Cardiac valve prostheses-ISO 5840:2005; Supersedes EN 12006-1:1999 |
|
CEN EN ISO 6529 |
Protective Clothing - Protection Against Chemicals - Determination of Protective Clothing Materials to Permeation by Liquids and Gases-ISO 6529:2001; Supersedes EN 369:1993 |
|
CEN EN ISO 6579 |
Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp-Incorporates Amendment A1: July 2007 |
|
CEN EN ISO 6874 |
Dentistry - Polymer-based pit and fissure sealants-ISO 6874: 2005; Supersedes EN 26874: 1992 |
|
CEN EN ISO 6876 |
Dental root canal sealing materials-ISO 6876: 2001; Supersedes EN 26876: 1990 |
|
CEN EN ISO 6877 |
Dentistry Root-canal obturating points-ISO 6877:2006 |
|
CEN EN ISO 6887-4 |
Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 4: Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products-Incorporating Corrigendum December 2004 |
|
CEN EN ISO 7287 |
Graphical symbols for thermal cutting equipment-ISO 7287: 2002 |
|
CEN EN ISO 7346-2 |
Water Quality - Determination of the Acute Lethal Toxicity of Substances to a Freshwater Fish [Brachydanio Rerio Hamilton (Teleostei, Cyprinidae)] - Part 2: Semi-Static Method-ISO 7346-2: 1996 |
|
CEN EN ISO 7393-3 |
Water Quality - Determination of Free Chlorine and Total Chlorine - Part 3: Iodometric Titration Method for the Determination of Total Chlorine-ISO 7393-3: 1990 |
|
CEN EN ISO 748 |
Hydrometry - Measurement of liquid flow in open channels using current-meters or floats |
|
CEN EN ISO 7491 |
Dental Materials - Determination of Colour Stability-ISO 7491:2000; Supersedes EN 27491:1991 |
|
CEN EN ISO 7492 |
Dental Explorers-ISO 7402: 1997 |
|
CEN EN ISO 7785-1 |
Dental Handpieces - Part 1: High-Speed Air Turbine Handpieces-ISO 7785-1:1997 |
|
CEN EN ISO 7786 |
Dental Rotary Instruments - Laboratory Abrasive Instruments-ISO 7786:2001; Supersedes EN 27786:1991 |
|
CEN EN ISO 7944 |
Optics and Optical Instruments - Reference Wavelengths-ISO 7944:1998 |
|
CEN EN ISO 7980 |
Water Quality - Determination of Calcium and Magnesium - Atomic Absorption Spectrometric Method-ISO 7980:1986 |
|
CEN EN ISO 80000-8 |
Quantities and units - Part 8: Acoustics |
|
CEN EN ISO 8253-1 |
Acoustics - Audiometric Test Methods - Part 1: Basic Pure Tone Air and Bone Conduction Threshold Audiometry-ISO 8253-1:1989 |
|
CEN EN ISO 8316 |
Measurement of Liquid Flow in Closed Conduits - Method by Collection of the Liquid in a Volumetric Tank-ISO 8316: 1987 |
|
CEN EN ISO 8321-2 |
Ophthalmic Optics - Specifications for Material, Optical and Dimensional Properties of Contact Lenses - Part 2: Single-Vision Hydrogel Contact Lenses-ISO 8321-2:2000; Partially superseded by CEN EN ISO 18369-1 and CEN EN ISO 18369-2: 2006 |
|
CEN EN ISO 8362-1 |
Injection containers and accessories - Part 1: Injection vials made of glass tubing-ISO 8362-1:2003; Supersedes EN 28362-1:1993 |
|
CEN EN ISO 8536-2 |
Infusion Equipment for Medical Use - Part 2: Closures for Infusion Bottles-ISO 8536-2:2001 |
|
CEN EN ISO 8560 |
Technical Drawnings - Construction Drawings - Representation of Modular Sizes, Lines and Grids-ISO 8560:1986 |
|
CEN EN ISO 8655-6 |
Piston-operated volumetric apparatus Part 6: Gravimetric methods for the determination of measurement error-ISO 8655-6: 2002 |
|
CEN EN ISO 8662-10 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 10: Nibblers and Shears-ISO 8662-10: 1998 |
|
CEN EN ISO 8662-14 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 14: Stone-Working Tools and Needle Scalers-ISO 8662-14: 1996 |
|
CEN EN ISO 8662-8 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 8: Polishers and Rotary, Orbital and Random Orbital Sanders-ISO 8662-8: 1997 |
|
CEN EN ISO 8692 |
Water quality - Freshwater algal growth inhibition test with unicellular green algae-ISO 8692:2004; Supersedes EN 28692:1993 |
|
CEN EN ISO 8835-4 |
Inhalational anaesthesia systems - Part 4: Anaesthetic vapour delivery devices-Partially supersedes EN 740:1998; ISO 8835-4:2004 |
|
CEN EN ISO 8871-1 |
Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates-ISO 8871-1:2003; Supersedes EN ISO 8871:1997 |
|
CEN EN ISO 8980-4 |
Ophthalmic Optics - Uncut Finished Spectacle Lenses - Part 4: Specifications and Test Methods for Anti-Reflection Coatings-ISO 8980-4:2006 |
|
CEN EN ISO 9169 |
Air quality - Definition and determination of performance characteristics of an automatic measuring system-ISO 9169:2006 |
|
CEN EN ISO 9239-1 |
Reaction to Fire Tests for Floorings - Part 1: Determination of the Burning Behaviour Using a Radiant Heat Source-ISO 9239-1: 2002 |
|
CEN EN ISO 9241-110 |
Ergonomics of human-system interaction - Part 110: Dialogue principles-ISO 9241-110:2006;:1996 |
|
CEN EN ISO 9346 |
Thermal Insulation - Mass Transfer - Physical Quantities and Definitions (ISO 9346 : 1987) |
|
CEN EN ISO 9360-1 |
Anaesthetic and Respiratory Equipment - Heat and Moisture Exchangers (HMEs) for Humidifying Respired Gases in Humans - Part 1: HMEs for Use with Minimum Tidal Volumes of 250 ml-ISO 9360-1:2000 |
|
CEN EN ISO 9391 |
Water Quality - Sampling in Deep Waters for Macro-Invertebrates - Guidance on the Use of Colonization, Qualitative and Quantitative Samplers; (ISO 9391 : 1993) |
|
CEN EN ISO 9431 |
Construction Drawings - Spaces for Drawing and for Text, and Title Blocks on Drawing Sheets-ISO 9431:1990 |
|
CEN EN ISO 9488 |
Solar Energy - Vocabulary-ISO 9488:1999 |
|
CEN EN ISO 9509 |
Water quality - Toxicity test for assessing the inhibition of nitrification of activated sludge microorganisms-ISO 9509: 2006 |
|
CEN EN ISO 9562 |
Water quality - Determination of adsorbable organically bound halogens (AOX)-ISO 9562:2004; Supersedes EN 1485:1996 |
|
CEN EN ISO 9888 |
Water Quality - Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium - Static Test (Zahn-Wellens Method)-Supersedes EN 29888:1993; ISO 9888:1999 |
|
CEN EN ISO 9902-1 |
Textile Machinery - Noise Test Code - Part 1: Common Requirements-ISO 9902-1:2001 |
|
CEN EN ISO 9902-3 |
Textile Machinery - Noise Test Code - Part 3: Nonwoven Machinery-ISO 9902-3:2001 |
|
CEN ENV 12018 |
Identification, Administrative, and Common Clinical Data Structure for Intermittently Connected Devices Used in Healthcare (Including Machine Readable Cards) |
|
CEN ENV 12443 |
Medical Informatics - Healthcare Information Framework (HIF) |
|
CEN ENV 12612 |
Medical Informatics - Messages for the Exchange of Healthcare Administrative Information |
|
CEN ENV 1317-4 |
Road Restraint Systems - Part 4: Performance Classes, Impact Test Acceptance Criteria and Test Methods for Terminals and Transitions of Safety Barries |
|
CEN ENV 13381-2 |
Test Methods for Determining the Contribution to the Fire Resistance of Structural Members - Part 2: Vertical Protective Membranes |
|
CEN ENV 13381-6 |
Test Methods for Determining the Contribution to the Fire Resistance of Structural Members - Part 6: Applied Protection to concrete Filled Hollow Steel Columns |
|
CEN ENV 14027 |
Method for the Simulation of Wear Before the Detection of Nickel Release from Coated Metal and Combination Spectacle Frames |
|
CEN ENV 14237 |
Textiles in the Healthcare System |
|
CEN ENV 737-6 |
Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum |
|
CENELEC HD 243 S8 |
Graphical Symbols for Use on Equipment. Index, Survey and Compilation of the Single Sheets |
|
CENELEC HD 303 |
Test Procedures for Germanium Gamma-Ray Detectors |
|
CENELEC HD 323.2.17 S2 |
Basic Environmental Testing Procedures - Part 2: Tests. Test Q: Sealing |