|
CEN EN 1264-3 |
Floor Heating - Systems and Components - Part 3: Dimensioning |
|
CEN EN 1264-4 |
Floor Heating - Systems and Components - Part 4: Installation |
|
CEN EN 12667 |
Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Products of High and Medium Thermal Resistance |
|
CEN EN 12670 |
Natural Stone - Terminology |
|
CEN EN 12697-31 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor |
|
CEN EN 12761-2 |
Agricultural and Forestry Machinery - Sprayers and Liquid Fertilizer Distributors - Environmental Protection - Part 2: Field Crop Sprayers |
|
CEN EN 12966-2 |
Road vertical signs - Variable message traffic signs - Part 2: Initial type testing |
|
CEN EN 13038 |
Soil Improvers and Growing Media - Determination of Electrical Conductivity |
|
CEN EN 13053 |
Ventilation for Buildings - Air Handling Units - Ratings and Performance for Units, Components and Sections |
|
CEN EN 13123-1 |
Windows, Doors and Shutters - Explosion Resistance - Requirements and Classification - Part 1: Shock Tube |
|
CEN EN 13146-3 |
Railway applications Track Test methods for fastening systems Part 3: Determination of attenuation of impact loads |
|
CEN EN 1317-1 |
Road Restraint Systems - Part 1: Terminology and General Criteria for Test Methods |
|
CEN EN 1335-1 |
Office Furniture - Office Work Chair - Part 1: Dimensions - Determination of Dimensions |
|
CEN EN 13524 |
Highway maintenece machines - Safety requirements |
|
CEN EN 1354 |
Determination of compressive strength of lightweight aggregate concrete with open structure |
|
CEN EN 13635 |
Irrigation Techniques - Localised Irrigation Systems - Terminology and Data to Be Supplied by the Manufacturer |
|
CEN EN 13829 |
Thermal Performance of Buildings - Determination of Air Permeability of Buildings - Fan Pressurization Method-ISO 9972:1996, Modified |
|
CEN EN 13956 |
Flexible sheet for waterproofing Plastic and rubber sheets for roof waterproofing Definitions and characteristics-Incorporating Corrigendum June 2006 |
|
CEN EN 14358 |
Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample |
|
CEN EN 1451-1 |
Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Polypropylene (PP) - Part 1: Specifications for Pipes, Fittings and the System |
|
CEN EN 14618 |
Agglomerated stone - Terminology and classification |
|
CEN EN 14629 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete |
|
CEN EN 14963 |
Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
|
CEN EN 1504-10 |
Products and systems for the protection and repair of concrete structures Definitions Requirements Quality control and evaluation of conformity Part 10: Site application of products and systems and quality control of the works-Incorporating Corrigendum October 2005 |
|
CEN EN 1506 |
Ventilation for Buildings - Sheet Metal Air Ducts and Fittings with Circular Cross-Section - Dimensions |
|
CEN EN 15097 |
Irrigation techniques - Localised irrigation - Hydraulic evaluation |
|
CEN EN 15334 |
Sanitary appliances - Methacrylic dispersions of high filler content |
|
CEN EN 1670 |
Building Hardware - Corrosion Resistance - Requirements and Test Methods |
|
CEN EN 179 |
Building hardware Emergency exit devices operated by a lever handle or push pad Requirements and test methods-Includes Amendment A1: 2001; Incorporating Corrigenda October 2001 and March 2002 to Amendment A1 |
|
CEN EN 196-2 |
Methods of testing cement Part 2: Chemical analysis of cement-Supersedes EN 196-21:1989 |
|
CEN EN 303-6 |
Heating Boilers - Part 6: Heating Boilers with Forced Draught Burners - Specific Requirements for the Domestic Hot Water Operation of Combination Boilers with Atomizing Oil Burners of Nominal Heat Input Not Exceeding 70 kW |
|
CEN EN 303-7 |
Heating boilers - Part 7: Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1 000 kW |
|
CENELEC EN 50144-2-15 |
Safety of Hand-Held Electric Motor Operated Tools Part 2-15: Particular Requirements for Hedge Trimmers-Ratified European Text:08/01/2000 |
|
CENELEC EN 50229 |
Electric Clothes Washer-Dryers for Household Use - Methods of Measuring the Performance |
|
CEN EN 508-3 |
Roofing Products from Metal Sheet - Specification for Self-Supporting Products of Steel, Aluminium or Stainless Steel Sheet - Part 3: Stainless Steel |
|
CEN EN 520 |
Gypsum plasterboards - Definitions, requirements and test methods |
|
CEN EN 523 |
Steel Strip Sheaths for Prestressing Tendons - Terminology, Requirements Quality Control |
|
CEN EN 568 |
Mountaineering Equipment - Ice Anchors - Safety Requirements and Test Methods |
|
CENELEC EN 60240-1 |
Characteristics of Electric Infra-Red Emitters for Industrial Heating Part 1: Short Wave Infra-Red Emitters (IEC 240-1 : 1992) |
|
CENELEC EN 60335-2-61 |
Household and similar electrical appliances Safety Part 2-61: Particular requirements for thermal-storage room heaters-IEC 60335-2-61:2002 + A1:2005; Includes Amendment A1:2005) |
|
CENELEC EN 60335-2-72 |
Safety of Household and Similar Electrical Appliances - Part 2-72: Particular Requirements for Automatic Machines for Floor Treatment for Commercial and Industrial Use-Includes Amendment A1:2000; IEC 60335-2-72:1995+A1:2000, Modified |
|
CENELEC EN 60335-2-83 |
Household and similar electrical appliances Safety Part 2-83: Particular requirements for heated gullies for roof drainage-IEC 60335-2-83: 2001 |
|
CENELEC EN 60335-2-86 |
Household and similar electrical appliances - Safety Part 2-86: Particular requirements for electric fishing machines-Includes amendment A1:2005; IEC 60335-2-86: 2002;: 2000 |
|
CENELEC EN 60335-2-88 |
Household and similar electrical appliances - Safety Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems-IEC 60335-2-88: 2002 |
|
CENELEC EN 60704-1 |
Household and Similar Electrical Appliances Test Code for the Determination of Airborne Acoustical Noise Part 1: General Requirements-IEC 60704-1: 1997 |
|
CENELEC EN 62056-62 |
Electricity metering - Data exchange for meter reading, tariff and load control - Part 62: Interface classes |
|
CEN EN 716-2 |
Furniture - Children´s Cots and Folding Cots for Domestic Use - Part 2: Test Methods |
|
CEN EN 927-1 |
Paints and Varnishes - Coating Materials and Coating Systems for Exterior Wood - Part 1: Classification and Selection |
|
CEN EN 947 |
Hinged or Pivoted Doors - Determination of the Resistance to Vertical Load-Supersedes EN 108:1980 |
|
CEN EN 998-1 |
Specification for mortar for masonry Part 1: Rendering and plastering mortar |
|
CEN EN ISO 10077-1 |
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General-ISO 10077-1:2006 |
|
CEN EN ISO 11909 |
Binders for Paints and Varnishes - Polyisocyanate Resins - General Methods of Test |
|
CEN EN ISO 13793 |
Thermal Performance of Buildings - Thermal Design of Foundations to Avoid Frost Heave-ISO 13793:2001 |
|
CEN EN ISO 14689-1 |
Geotechnical investigation and testing - Identification and classification of rock - Part 1: Identification and description-ISO 14689-1:2003 |
|
CEN EN ISO 22476-3 |
Geotechnical Investigation and Testing - Field Testing - Part 3: Standard Penetration Test |
|
CEN EN ISO 22867 |
Forestry machinery Vibration test code for portable hand-held machines with internal combustion engine Vibration at the handles-Incorporates Technical Corrigendum June 2006; ISO 22867:2004 |
|
CEN EN ISO 22868 |
Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy)-ISO 22868:2005, corrected version 2005-06-01 |
|
CEN EN ISO 2812-3 |
Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium |
|
CEN EN ISO 3231 |
Paints and Varnishes - Determination of Resistance to Humid Atmospheres Containing Sulfur Dioxide-ISO 3231: 1993 |
|
CEN EN ISO 3767-4 |
Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment - Symbols for Operator Controls and Other Displays - Part 4: Symbols for Forestry Machinery-Includes Amendment A1:2000; ISO 3767-4:1993 + A1:2000 |
|
CEN EN ISO 7088 |
Fish-meal - Vocabulary-ISO 7088:1981 |
|
CEN EN ISO 717-1 |
Acoustics - Rating of Sound Insulation in Buildings and of Building Elements - Part 1: Airborne Sound Insulation-ISO 717-1: 1996; Amendment A1:08/2006 |
|
CEN ENV 1090-4 |
Execution of Steel Structures - Part 4: Supplementary Rules for Hollow Section Structures |
|
CEN ENV 1090-5 |
Execution of Steel Structures - Part 5: Supplementary Rules for Bridges-Ratified European Text |
|
CEN ENV 1452-7 |
Plastics Piping Systems for Water Supply - Unplasticized Poly(Vinyl Chloride)(PVC-U) - Part 7: Guidance for the Assessment of Conformity |
|
CEN ENV 1504-9 |
Products and Systems for the Protection and Repair of Concrete Structures - Definitions, Requirements, Quality Control and Evaluation of Conformity - Part 9: General Principles for the Use of Products and Systems |
|
CENELEC HD 384.3 |
Electrical Installations of Buildings Part 3: Assessment of General Characteristics |
|
CENELEC HD 384.4.42 S1/A2 |
AMD A2 Electrical Installations of Buildings Part 4: Protection for Safety Chapter 42: Protection Against Thermal Effects |
|
CENELEC HD 384.5.537 S1 |
Electrical Installations of Buildings - Part 5: Selection and Erection of Electrical Equipment. Chapter 53: Switchgear and Controlgear. Section 537: Devices for Isolation and Switching |
|
CENELEC HD 384.5.56 |
Electrical Installations of Buildings Part 5: Selection and Erection of Electrical Equipment Chapter 56: Supplies for Safety Services |
|
CENELEC HD 384.7.703 S1 |
Electrical Installations of Buildings Part 7: Requirements for Special Installations or Locations Section 703- Locations Containing Sauna Heaters |
|
CENELEC HD 384.7.705 S1 |
Electrical Installations of Buildings Part 7: Requirements for Special Installations or Locations Section 705 - Electrical Installations of Agricultural and Horticultural Premises |
|
CENELEC HD 384.7.706 S1 |
Electrical Installations of Buildings Part 7: Requirements for Special Installations or Locations Section 706 - Restrictive Conducting Locations |
|
CEN 10426-1:00PRA1 |
Petroleum and Natural Gas Industries - Cements and Materials for Well Cementing - Part 1: Specification-ISO 10426-1:2000/DAM 1 |
|
CEN CEN ISO/TS 15875-7 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity-ISO/TS 15875-7:2003 |
|
CEN CEN ISO/TS 15877-7 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity-ISO/TS 15877-7:2003 |
|
CEN CEN ISO/TS 17764-2 |
Animal feeding stuffs - Determination of the content of fatty acids - Part 2: Gas chromatographic method |
|
CEN CEN/TR 13387 |
Child use and care articles - Safety guidelines-Supersedes CR 13387:1999 |
|
CEN CEN/TR 14739 |
Scheme for carrying out a risk assessment for flammable refrigerants in case of household refrigerators and freezers |
|
CEN CEN/TR 14788 |
Ventilation for buildings - Design and dimensioning of residential ventilation systems |
|
CEN CEN/TR 15371 |
Safety of toys - Replies to requests for interpretation of EN 71-1, EN 71-2, and EN 71-8 |
|
CEN CEN/TR 1749 |
European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)-: 2001 |
|
CEN CEN/TS 12390-9 |
Testing hardened concrete Part 9: Freeze-thaw resistance Scaling |
|
CEN CEN/TS 13126-2 |
Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 2: Casement fastener handles |
|
CEN CEN/TS 13381-1 |
Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes |
|
CEN CEN/TS 14578 |
Plastics piping systems for water supply or drainage and sewerage Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP) Recommended practice for installation-Supersedes EN 1636-6:1997 |
|
CEN CEN/TS 14758-3 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifier(s) (PP-MD) - Part 3: Guidance for installation |
|
CEN CEN/TS 15087 |
Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing Test method for mechanical fasteners |
|
CEN CEN/TS 15185 |
Furniture Assessment of the surface resistance to abrasion |
|
CEN CEN/TS 15398 |
Resilient, textile and laminate floor coverings - Floor covering standard symbols |
|
CEN CEN/TS 15452 |
Fertilizers - Determination of chelating agents - Determination of iron chelated by o,p-EDDHA by reversed phase HPLC |
|
CEN CEN/TS 1555-7 |
Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 7: Guidance for the assessment of conformity |
|
CEN CEN/TS 15604 |
Fertilizers - Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen |
|
CENELEC CLC/TR 50451 |
Railway applications - Systematic allocation of safety integrity requirements |
|
CENELEC CLC/TR 50479 |
Electrical installation guide - Selection and erection of electrical equipment - Wiring systems - Limitation of temperature rise of connecting interfaces |
|
CEN CR 13455 |
Soil Improvers and Growing Media - Guidelines for the Safety of Users, the Environment and Plants |
|
CEN CR 14378 |
Ventilation for buildings - Experimental determination of mechanical energy loss coefficients of air handling components-Incorporating corrigendum July 2002 |
|
CEN EN 1013-5 |
Light Transmitting Profiled Plastic Sheeting for Single Skin Roofing - Part 5: Specific Requirements, Test Methods and Performance of Polymethylmethacrylate (PMMA) Sheets |
|
CEN EN 1021-1 |
Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette |
|
CEN EN 1023-1 |
Office Furniture - Screens Part 1: Dimensions |
|
CEN EN 1052-3 |
Methods of test for masonry - Part 3: Determination of initial shear strength-Incorporates Amendment A1: 03/2007 |
|
CEN EN 1065 |
Adjustable Telescopic Steel Props - Product Specifications, Design and Assessment by Calculation and Tests |
|
CEN EN 1074-3 |
Valves for Water Supply - Fitness for Purpose Requirements and Appropriate Verification Tests - Part 3: Check Valves |
|
CEN EN 108 |
Methods of Testing Doors: Test for Deformation of the Leaf in Its Plane |
|
CEN EN 1080 |
Impact protection helmets for young children-Includes Amendment A1:2002 and A2:2005 |
|
CEN EN 1097-2 |
Tests for Mechanical and Physical Properties of Aggregates - Part 2: Methods for the Determination of Resistance to Fragmentation-Includes amendment A1:July 2006 |
|
CEN EN 1097-3 |
Tests for Mechanical and Physical Properties of Aggregates - Part 3: Determination of Loose Bulk Density and Voids |
|
CEN EN 1097-4 |
Tests for Mechanical and Physical Properties of Aggregates - Part 4: Determination of the Voids of Dry Compacted Filler |
|
CEN EN 1097-7 |
Tests for Mechanical and Physical Properties of Aggregates - Part 7: Determination of the Particle Density of Filler - Pyknometer Method |
|
CEN EN 1148 |
Heat exchangers - Water-to-water heat exchangers for district heating - Test procedures for establishing the performance data-Includes Amendment A1:2005 |
|
CEN EN 1170-4 |
Precast Concrete Products - Test Method for Glass-Fibre Reinforced Cement - Part 4: Measuring Bending Strength - `Simplified Bending Test´ Method |
|
CEN EN 1170-7 |
Precast Concrete Products - Test Method for Glass-Fibre Reinforced Cement - Part 7: Measurement of Extremes of Dimensional Variations Due to Moisture Content |
|
CEN EN 12007-3 |
Gas Supply Systems - Pipelines for Maximum Operating Pressure up to and Including 16 Bar - Part 3: Specific Functional Recommendations for Steel |
|
CEN EN 12047 |
Solid Fertilizers - Measurement of Static Angle of Repose-ISO 8398: 1989 Modified |
|
CEN EN 12050-2 |
Wastewater Lifting Plants for Buildings and Sites - Principles of Construction and Testing - Part 2: Lifting Plants for Faecal-Free Wastewater |
|
CEN EN 12091 |
Thermal Insulating Products for Building Applications - Determination of Freeze-Thaw Resistance |
|
CEN EN 12097 |
Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems-Supersedes ENV 12097:1997 |
|
CEN EN 12104 |
Resilient Floor Coverings - Cork Floor Tiles - Specification |
|
CEN EN 12110 |
Tunnelling machines Air locks Safety requirements |
|
CEN EN 12179 |
Curtain Walling - Resistance to Wind Load - Test Method |
|
CEN EN 12188 |
Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Adhesion Steel-to-Steel for Characterization of Structural Bonding Agents |
|
CEN EN 12192-1 |
Products and Systems for the Protection and Repair of Concrete Structures - Granulometry Analysis - Part 1: Test Method for Dry Components of Premixed Mortar |
|
CEN EN 12207 |
Windows and Doors - Air Permeability - Classification |
|
CEN EN 12211 |
Windows and Doors - Resistance to Wind Load - Test Methods-Supersedes EN 77:1977 |
|
CEN EN 12215 |
Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
|
CEN EN 12219 |
Doors - Climatic Influences - Requirements and Classification |
|
CEN EN 12236 |
Ventilation for Buildings - Ductwork Hangers and Supports - Requirements for Strength |
|
CEN EN 12244-2 |
Direct Gas-Fired Washing Machines, of Nominal Heat Input Not Exceeding 20 kW - Part 2: Rational Use of Energy |
|
CEN EN 12270 |
Mountaineering Equipment - Chocks - Safety Requirements and Test Methods |
|
CEN EN 12272-3 |
Surface dressing - Test method - Part 3: Determination of binder aggregate adhesivity by the Vialit plate shock test method |
|
CEN EN 12274-1 |
Slurry Surfacing - Test Methods - Part 1: Sampling for Binder Extraction |
|
CEN EN 12274-7 |
Slurry surfacing - Test methods - Part 7: Shaking abrasion test |
|
CEN EN 12274-8 |
Slurry surfacing - Test methods - Part 8: Visual assessment of defects |
|
CEN EN 12279 |
Gas Supply Systems - Gas Pressure Regulating Installations on Service Lines - Functional Requirements regulating-Includes amendment A1: 07/2005 |
|
CEN EN 12311-1 |
Flexible Sheets for Waterproofing - Determination of Tensile Properties - Part 1: Bitumen Sheets for Roof Waterproofing |
|
CEN EN 12311-2 |
Flexible Sheets for Waterproofing - Determination of Tensile Properties - Part 2: Plastic and Rubber Sheets for Roof Waterproofing |
|
CEN EN 12317-2 |
Flexible Sheets for Waterproofing - Determination of Shear Resistance of Joints - Part 2: Plastic and Rubber Sheets for Roof Waterproofing |
|
CEN EN 12324-1 |
Irrigation Techniques - Reel Machine Systems - Part 1: Size Series |
|
CEN EN 12325-2 |
Irrigation Techniques - Centre Pivot and Moving Lateral Systems - Part 2: Minimum Performances and Technical Characteristics |
|
CEN EN 12390-2 |
Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
|
CEN EN 12390-8 |
Testing Hardened Concrete - Part 8: Depth of Penetration of Water Under Pressure |
|
CEN EN 12391-1 |
Chimneys - Execution standard for metal chimneys - Part 1: Chimneys for non-roomsealed heating appliances |
|
CEN EN 12400 |
Windows and pedestrian doors - Mechanical durability - Requirements and classification |
|
CEN EN 12429 |
Thermal Insulating Products for Building Applications - Conditioning to Moisture Equilibrium under Specified Temperature and Humidity Conditions |
|
CEN EN 12444 |
Industrial, Commercial and Garage Doors and Gates - Resistance to Wind Load - Testing and Calculation |
|
CEN EN 12467 |
Fibre-cement flat sheets - Product specification and test methods-Includes Amendment A1: 08/2005 and Amendment 2: 09/2006 |
|
CEN EN 12503-1 |
Sports mats - Part 1: Gymnastic mats, safety requirements-Incorporating corrigendum July 2002 |
|
CEN EN 1253-4 |
Gullies for Buildings - Part 4: Access Covers |
|
CEN EN 12579 |
Soil Improvers and Growing Media - Sampling |
|
CEN EN 12580 |
Soil Improvers and Growing Media - Determination of a Quantity |
|
CEN EN 12586 |
Child Care Articles - Soother Holder - Safety Requirements and Test Methods |
|
CEN EN 12599 |
Ventilation for buildings Test procedures and measuring methods for handing over installed ventilation and air conditioning systems-Incorporating corrigendum July 2002 |
|
CEN EN 12600 |
Glass in building - Pendulum test - Impact test method and classification for flat glass |
|
CEN EN 12617-1 |
Products and systems for the protection and repair of concrete structures Test methods Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) |
|
CEN EN 12617-3 |
Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Part 3: Determination of Early Age Linear Shrinkage for Structural Bonding Agents |
|
CEN EN 12618-1 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility |
|
CEN EN 12620 |
Aggregates for concrete-Incorporating corrigendum May 2004 |
|
CEN EN 12628 |
Diving Accessories - Combined Bouyancy and Rescue Devices - Functional and Safety Requirements, Test Methods |
|
CEN EN 12629-2 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines |
|
CEN EN 12675 |
Traffic Signal Controllers - Functional Safety Requirements |
|
CEN EN 12697-11 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen-Incorporating corrigendum February 2007 |
|
CEN EN 12697-22 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking-Incorporates Amendment A1 |
|
CEN EN 12697-29 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 29: Determination of the dimensions of a bituminous specimen |
|
CEN EN 12697-32 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor-Incorporating Amendment A1: 7/2007 |
|
CEN EN 12697-34 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test-Incorporates Amendment A1: July 2007 |
|
CEN EN 12697-43 |
Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel |
|
CEN EN 12706 |
Adhesives - Test Methods for Hydraulic Setting Floor Smoothing and/or Levelling Compounds - Determination of Flow Characteristics |
|
CEN EN 12734 |
Irrigation Techniques - Quick Coupling Pipes for Movable Irrigation Supply - Technical Characteristics and Testing |
|
CEN EN 12752-2 |
Gas-Fired Type B Tumble Dryers of Nominal Heat Input Not Exceeding 20 kW - Part 2: Rational Use of Energy |
|
CEN EN 12763 |
Fibre-Cement Pipes and Fittings for Discharge Systems for Buildings - Dimensions and Technical Terms of Delivery |
|
CEN EN 12808-2 |
Grouts for Tiles - Part 2: Determination of Resistance to Abrasion |
|
CEN EN 12808-5 |
Grouts for Tiles - Part 5: Determination of Water Absorption |
|
CEN EN 12831 |
Heating systems in buildings - Method for calculation of the design heat load |
|
CEN EN 12875-4 |
Mechanical dishwashing resistance of utensils - Part 4: Rapid test for domestic ceramic articles |
|
CEN EN 12875-5 |
Mechanical dishwashing resistance of utensils - Part 5: Rapid test for ceramic catering articles |
|
CEN EN 129 |
Methods of Testing Doors: Test for Deformation in Torsion of the Door Leaves-Superseded |
|
CEN EN 12945 |
Liming materials - Determination of neutralizing value - Titrimetric methods |
|
CEN EN 12948 |
Liming Materials - Determination of Size Distribution by Dry and Wet Sieving |
|
CEN EN 12951 |
Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods |
|
CEN EN 12970 |
Mastic Asphalt for Waterproofing - Definitions, Requirements and Test Methods |
|
CEN EN 1298 |
Mobile Access and Working Towers - Rules and Guidelines for the Preparation of an Instruction Manual |
|
CEN EN 1303 |
Building Hardware - Cylinders for Locks - Requirements and Test Methods |
|
CEN EN 13036-3 |
Road and airfield surface characteristics Test methods Part 3: Measurement of pavement surface horizontal drainability |
|
CEN EN 13043 |
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas-Incorporating corrigendum May 2004 |
|
CEN EN 13057 |
Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Resistance of Capillary Absorption |
|
CEN EN 13084-1 |
Free-Standing Industrial Chimneys - Part 1: General Requirements |
|
CEN EN 13084-5 |
Free-standing chimneys - Part 5: Material for brick liners - Product specifications-Incorporating Corrigendum May 2006 |
|
CEN EN 13089 |
Mountaineering Equipment - Ice-Tools - Safety Requirements and Test Methods |
|
CEN EN 13108-21 |
Bituminous mixtures Material specifications Part 21: Factory Production Control |
|
CEN EN 13120 |
Internal blinds - Performance requirements including safety |
|
CEN EN 13125 |
Shutters and Blinds - Additional Thermal Resistance - Allocation of a Class of Air Permeability to a Product |
|
CEN EN 13146-5 |
Railway applications Track Test methods for fastening systems Part 5: Determination of electrical resistance |
|
CEN EN 13161 |
Natural Stone Test Methods - Determination of Flexural Strength under Constant Moment |
|
CEN EN 13170 |
Thermal Insulation Products for Buildings - Factory Made Products of Expanded Cork (ICB) - Specification-Including Corrigendum December 2005 |
|
CEN EN 13172 |
Thermal Insulating Products - Evaluation of Conformity-Amendment A1: June 2005 |
|
CEN EN 13187 |
Thermal Performance of Buildings - Qualitative Detection of Thermal Irregularities in Building Envelopes - Infrared Method-ISO 6781:1983 Modified |
|
CEN EN 1319 |
Domestic Gas-Fired Forced Convection Air Heaters for Space Heating, with Fan-Assisted Burners Not Exceeding a Net Heat Input of 70 kW-Includes Amendments A1:2001 and A2:1999 |
|
CEN EN 13198 |
Precast concrete products Street furniture and garden products |
|
CEN EN 13213 |
Hollow Floors |
|
CEN EN 13242 |
Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction-Incorporating corrigendum May 2004 |
|
CEN EN 13244-5 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
|
CEN EN 13263-1 |
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria |
|
CEN EN 13271 |
Timber fasteners Characteristic load-carrying capacities and slip-moduli for connector joints-Incorporating Corrigendum September 2003 |
|
CEN EN 13277-2 |
Protective Equipment for Martial Arts - Part 2: Additional Requirements and Test Methods for Instep Protectors, Shin Protectors and Forearm Protectors |
|
CEN EN 13286-43 |
Unbound and hydraulically bound mixtures Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures |
|
CEN EN 13300 |
Paints and Varnishes - Water-Borne Coating Materials and Coating Systems for Interior Walls and Ceilings - Classification |
|
CEN EN 13304 |
Bitumen and bituminous binders - Framework for specification of oxidised bitumens |
|
CEN EN 13310 |
Kitchen sinks Functional requirements and test methods |
|
CEN EN 13321-2 |
Open data communication in building automation, controls and building management - Home and building electronic systems - Part 2: KNXnet/IP Communication |
|
CEN EN 13329 |
Laminate Floor Coverings - Specifications, Requirements and Test Methods |
|
CEN EN 13362 |
Geosynthetic Barriers - Characteristics required for use in the construction of canals |
|
CEN EN 13364 |
Natural Stone Test Methods - Determination of the Breaking Load at Dowel Hole |
|
CEN EN 13366 |
Fertilizers - Treatment with a Cation Exchange Resin for the Determination of the Chelated Micro-Nutrient Content and of the Chelated Fraction of Micro-Nutrients |
|
CEN EN 13383-2 |
Armourstone - Part 2: Test Methods |
|
CEN EN 13391 |
Mechanical tests for post-tensioning systems |
|
CEN EN 13395-3 |
Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Workability - Part 3: Test for Flow of Repair Concrete |
|
CEN EN 13408 |
Methods of Test for Hydraulic Setting Floor Smoothing and/or Levelling Compounds - Determination of Bond Strength |
|
CEN EN 1341 |
Slabs of Natural Stone for External Paving - Requirements and Test Methods |
|
CEN EN 13443-1 |
Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 to 150 - Requirements for performances, safety and testing-Incorporates Amendment A:2007 |
|
CEN EN 13443-2 |
Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 to less than 80 - Requirements for performance, safety and testing-Incorporates Amendment A1: June 2007 |
|
CEN EN 13451-10 |
Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment |
|
CEN EN 13451-5 |
Swimming Pool Equipment - Part 5: Additional Specific Safety Requirements and Test Methods for Lane Lines |
|
CEN EN 13451-6 |
Swimming Pool Equipment - Part 6: Additional Specific Safety Requirements and Test Methods for Turning Boards |
|
CEN EN 13451-8 |
Swimming Pool Equipment - Part 8: Additional Specific Safety Requirements and Test Methods for Leisure Water Features |
|
CEN EN 1346 |
Adhesives for tiles - Determination of open time |
|
CEN EN 13466-1 |
Fertilizers - Determination of Water Content - (Karl Fischer Methods) - Part 1: Methanol as Extracting Medium |
|
CEN EN 1347 |
Adhesives for tiles - Determination of wetting capability |
|
CEN EN 13470 |
Thermal Insulating Products for Building Equipment and Industrial Installations - Determination of the Apparent Density of Preformed Pipe Insulation |
|
CEN EN 13476-1 |
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General requirements and performance characteristics |
|
CEN EN 13476-2 |
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A |
|
CEN EN 13494 |
Thermal insulation products for building applications Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material |
|
CEN EN 1352 |
Determination of Static Modulus of Elasticity under Compression of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure |
|
CEN EN 1356 |
Performance Test for Prefabricated Reinforced Components of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure under Transverse Load |
|
CEN EN 13564-2 |
Anti-flooding for buildings - Part 2: Test methods |
|
CEN EN 13579 |
Products and systems for the protection and repair of concrete structures Test methods Drying test for hydrophobic impregnation |
|
CEN EN 13581 |
Products and systems for the protection and repair of concrete structures Test method Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress |
|
CEN EN 13583 |
Flexible Sheets for Waterproofing - Bitumen, Plastic and Rubber Sheets for Roof Waterproofing - Determination of Hail Resistance |
|
CEN EN 13650 |
Soil Improvers and Growing Media - Extraction of Aqua Regia Soluble Elements |
|
CEN EN 13652 |
Soil Improvers and Growing Media - Extraction of Water Soluble Nutrients and Elements |
|
CEN EN 13659 |
Shutters Performance requirements including safety |
|
CEN EN 1367-5 |
Tests for Thermal and Weathering Properties of Aggregates Part 5: Determination of Resistance to Thermal Shock |
|
CEN EN 13687-3 |
Products and Systems for the Protection and Repair of Concrete Structures Test Methods Determination of Thermal Compatibility Part 3: Thermal Cycling without De-Icing Salt Impact |
|
CEN EN 13738 |
Geotextiles and geotextile-related products - Determination of pullout resistance in soil |
|
CEN EN 13793 |
Thermal insulating products for building applications Determination of behaviour under cyclic loading |
|
CEN EN 13813 |
Screed material and floor screeds Screed material Properties and requirements |
|
CEN EN 13843 |
Roller sports equipment Inline-skates Safety requirements and test methods |
|
CEN EN 13848-2 |
Railway applications - Track - Track geometry quality - Part 2: Measuring systems - Track recording vehicles |
|
CEN EN 13862 |
Floor Cutting-Off Machines - Safety-Supersedes EN 500-5:1995 |
|
CEN EN 13869 |
Lighters - Child-Resistance for Lighters - Safety Requirements and Test Methods |
|
CEN EN 13877-1 |
Concrete pavements - Part 1: Materials |
|
CEN EN 13880-2 |
Hot applied joint sealants Part 2: Test method for the determination of cone penetration at 25°C |
|
CEN EN 13915 |
Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods |
|
CEN EN 13941 |
Design and installation of preinsulated bonded pipe systems for direct heating |
|
CEN EN 13947 |
Thermal performance of curtain walling - Calculation of thermal transmittance |
|
CEN EN 13963 |
Jointing materials for gypsum plasterboards - Definitions, requirements and test methods-Incorporating Corrigendum June 2006 |
|
CEN EN 13971 |
Carbonate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid |
|
CEN EN 1399 |
Resilient Floor Coverings - Determination of Resistance to Stubbed and Burning Cigarettes |
|
CEN EN 14011 |
Water quality - Sampling of fish with electricity |
|
CEN EN 14023 |
Bitumen and bituminous binders Framework specification for polymer modified bitumens |
|
CEN EN 14036 |
Child use and care articles - Baby bouncers - Safety requirements and test methods |
|
CEN EN 14037-3 |
Ceiling mounted radiant panels supplied with water at temperature below 120°C - Part 3: Rating method and evaluation of radiant thermal output |
|
CEN EN 14066 |
Natural Stone Test Methods - Determination of Resistance to Ageing by Thermal Shock |
|
CEN EN 14081-4 |
Timber structures Strength graded structural timber with rectangular cross section - Part 4: Machine grading Grading machine settings for machine controlled systems-Incorporates Amendment A1: February 2007 |
|
CEN EN 14085 |
Resilient floor coverings Specification for floor panels for loose laying |
|
CEN EN 14147 |
Natural stone test methods - Determination of resistance to ageing by salt mist |
|
CEN EN 14154-1 |
Water meters - Part 1: General requirements-Incorporates AMD 1: April 2007 |
|
CEN EN 14187-1 |
Cold applied joint sealants - Part 1:Test method for the determination of rate of cure |
|
CEN EN 14187-5 |
Cold applied joint sealants - Part 5: Test method for the determination of the resistance to hydrolysis |
|
CEN EN 14195 |
Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods-Incorporating Corrigendum June 2006 |
|
CEN EN 14196 |
Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers |
|
CEN EN 14201 |
Blinds and shutters Resistance to repeated operations (mechanical endurance) Methods of testing |
|
CEN EN 14209 |
Preformed plasterboard cornices - Definitions, requirements and test methods |
|
CEN EN 14220 |
Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications |
|
CEN EN 14224 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of crack bridging ability |
|
CEN EN 14225-3 |
Diving suits - Part 3: Actively heated or cooled suits (systems) - Requirements and test methods |
|
CEN EN 14225-4 |
Diving suits - Part 4: One atmosphere suits (ADS) - Human factors requirements and test methods |
|
CEN EN 14227-10 |
Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement |
|
CEN EN 14227-14 |
Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash |
|
CEN EN 14239 |
Ventilation for buildings Ductwork Measurement of ductwork surface area |
|
CEN EN 14367 |
Non controllable backflow preventer with different pressure zones - Family C, type A |
|
CEN EN 14438 |
Gas-fired insets for heating more than one room |
|
CEN EN 14465 |
Textiles - Upholstery fabrics - Specification and methods of test-Incorporates Amendment A1: 06/2006 |
|
CEN EN 14467 |
Recreational diving services - Requirements for recreational scuba diving service providers |
|
CEN EN 14487-2 |
Sprayed concrete Part 2: Execution |
|
CEN EN 14488-4 |
Testing sprayed concrete - Part 4: Bond strength of cores by direct tension |
|
CEN EN 14488-5 |
Testing sprayed concrete Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens |
|
CEN EN 14498 |
Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles |
|
CEN EN 14543 |
Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use-Incorporates Amendment A1: 06/2007 |
|
CEN EN 14587-1 |
Railway applications - Track - Flash butt welding of rails - Part 1: New R220, R260, R260Mn and R350HT grade rails in a fixed plant |
|
CEN EN 14591-2 |
Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers |
|
CEN EN 14591-4 |
Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers |
|
CEN EN 14597 |
Temperature control devices and temperature limiters for heat generating systems |
|
CEN EN 14617-11 |
Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient |
|
CEN EN 14617-5 |
Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance |
|
CEN EN 14617-8 |
Agglomerated stone - Test methods - Part 8: Determination of resistance to fixing (dowel hole) |
|
CEN EN 14652 |
Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing-Incorporates Amendment A1:6/2007 |
|
CEN EN 14653-1 |
Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications |
|
CEN EN 14692 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer |
|
CEN EN 14706 |
Thermal insulation products for building equipment and industrial installations Determination of maximum service temperature |
|
CEN EN 14721 |
Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete-Incorporates Amendment A1: 09/2007 |