|
CEN EN 12697-4 |
Bituminous mixtures - Test methods for hot mix asphalt - Part 4: Bitumen recovery: Fractionating column |
|
CEN EN 12697-41 |
Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids |
|
CEN EN 12697-9 |
Bituminous Mixtures Test Methods for Hot Mix Asphalt - Part 9: Determination of the Reference Density |
|
CEN EN 12699 |
Execution of Special Geotechnical Work - Displacement Piles |
|
CEN EN 1272 |
Child Care Articles - Table Mounted Chairs - Safety Requirements and Test Methods |
|
CEN EN 12721 |
Furniture - Assessment of Surface Resistance to Wet Heat-ISO 4211-2: 1983, Modified |
|
CEN EN 12730 |
Flexible Sheets for Waterproofing - Bitumen, Plastic and Rubber Sheets for Roof Waterproofing - Determination of Resistance to Static Loading |
|
CEN EN 12758 |
Glass in Building - Glazing and Airborne Sound Insulation - Product Descriptions and Determination of Properties |
|
CEN EN 12790 |
Child care articles - Reclined cradles |
|
CEN EN 12808-4 |
Grouts for Tiles - Part 4: Determination of Shrinkage |
|
CEN EN 12865 |
Hygrothermal Performance of Building Components and Building Elements - Determination of the Resistance of External Wall Systems to Driving Rain under Pulsating Air Pressure |
|
CEN EN 12868 |
Child Use and Care Articles - Methods for Determining the Release of N-Nitrosamines and N-Nitrosatable Substances from Elastomer or Rubber Teats and Soothers-Incorporating Corrigendum February 2002 |
|
CEN EN 12889 |
Trenchless Construction and Testing of Drains and Sewers |
|
CEN EN 12939 |
Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Thick Products of High and Medium Thermal Resistance |
|
CEN EN 1296 |
Flexible Sheets for Waterproofing - Bitumen, Plastic and Rubber Sheets for Roofing - Method of Artificial Ageing by Long Term Exposure to Elevated Temperature |
|
CEN EN 13030 |
Ventilation for Buildings - Terminals - Performance Testing of Louvres Subjected to Simulated Rain |
|
CEN EN 13031-1 |
Greenhouses: Design and Construction - Part 1: Commercial Production Greenhouses |
|
CEN EN 13039 |
Soil Improvers and Growing Media - Determination of Organic Matter Content and Ash |
|
CEN EN 13040 |
Soil Improvers and Growing Media - Sample Preparation for Chemical and Physical Tests, Determination of Dry Matter Content, Moisture Content and Laboratory Compacted Bulk Density |
|
CEN EN 13055-1 |
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout-Incorporating Corrigendum No. 1 Incorporating corrigendum May 2004 |
|
CEN EN 13063-2 |
Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions-Incorporates Amendment A1: 7/2007 |
|
CEN EN 13108-1 |
Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
|
CEN EN 13108-8 |
Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt |
|
CEN EN 13115 |
Windows - Classification of Mechanical Properties - Racking, Torsion and Operating Forces |
|
CEN EN 13116 |
Curtain Walling - Resistance to Wind Load - Performance Requirements |
|
CEN EN 13118 |
Agricultural Machinery - Potato Harvesting Equipment - Safety |
|
CEN EN 13124-1 |
Windows, Doors and Shutters - Explosion Resistance - Test Method - Part 1: Shock Tube |
|
CEN EN 13146-2 |
Railway applications Track Test methods for fastening systems Part 2: Determination of torsional resistance |
|
CEN EN 13146-7 |
Railway applications Track Test methods for fastening systems Part 7: Determination of clamping force |
|
CEN EN 13146-8 |
Railway applications - Track - Test methods for fastening systems - Part 8: In service testing-Includes A1: August 2006 |
|
CEN EN 13178 |
Personal Eye Protection - Eye Protectors for Snowmobile Users |
|
CEN EN 13179-2 |
Tests for Filler Aggregate Used in Bituminous Mixtures - Part 2: Bitumen Number |
|
CEN EN 13197 |
Road Marking Materials - Wear Simulators |
|
CEN EN 13200-6 |
Spectator facilities - Part 6: Demountable (temporary) stands |
|
CEN EN 13203-1 |
Gas-fired domestic appliances producing hot water - Appliances not exceding 70 kW heat input and 300 l water storage capacity - Part 1: Assessment of performance of hot water deliveries |
|
CEN EN 13207 |
Silage Thermoplastic Films |
|
CEN EN 1323 |
Adhesives for tiles - Concrete slabs for tests |
|
CEN EN 13244-2 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes |
|
CEN EN 13244-3 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings |
|
CEN EN 13258 |
Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles |
|
CEN EN 13277-3 |
Protective Equipment for Martial Arts - Part 3: Additional Requirements and Test Methods for Trunk Protectors |
|
CEN EN 13278 |
Open fronted gas-fired independent space heaters |
|
CEN EN 13286-1 |
Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling |
|
CEN EN 13286-3 |
Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters |
|
CEN EN 13286-4 |
Unbound and hydraulically bound mixtures Part 4: Test methods for laboratory reference density and water content Vibrating hammer |
|
CEN EN 13305 |
Bitumen and bituminous binders - Framework of specification of hard industrial bitumens |
|
CEN EN 13330 |
Shutters Hard body impact Test method |
|
CEN EN 13373 |
Natural stone test methods Determination of geometric characteristics on units |
|
CEN EN 13377 |
Prefabricated timber formwork beams Requirements, classification and assessment |
|
CEN EN 1338 |
Concrete paving blocks - Requirements and test methods-Incorporating Corrigendum May 2006 |
|
CEN EN 13383-1 |
Armourstone - Part 1: Specification-Incorporating corrigendum May 2004 |
|
CEN EN 13384-3 |
Chimneys - Thermal and fluid dynamic calculation methods - Part 3: Methods for the development of diagrams and tables for chimneys serving one heating appliance |
|
CEN EN 1339 |
Concrete paving flags - Requirements and test methods |
|
CEN EN 13395-4 |
Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of Workability - Part 4: Application of Repair Mortar Overhead |
|
CEN EN 13412 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression |
|
CEN EN 13416 |
Flexible Sheets for Waterproofing - Bitumen, Plastic and Rubber Sheets for Roof Waterproofing - Rules for Sampling |
|
CEN EN 1343 |
Kerbs of Natural Stone for External Paving - Requirements and Test Methods |
|
CEN EN 13448 |
Aricultural and Forestry Machinery - Inter-Row Mowing Units - Safety |
|
CEN EN 13451-2 |
Swimming Pool Equipment - Part 2: Additional Specific Safety Requirements and Test Methods for Ladders, Stepladders and Handle Bends-Incorporating Corrigendum September 2003 |
|
CEN EN 13467 |
Thermal Insulating Products for Building Equipment and Industrial Installations - Determination of Dimensions, Squareness, and Linearity of Preformed Pipe Insulation |
|
CEN EN 13472 |
Thermal Insulating Products for Building Equipment and Industrial Installations - Determination of Short Term Water Absorption by Partial Immersion of Performed Pipe Insulation |
|
CEN EN 1348 |
Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives |
|
CEN EN 13481-2 |
Railway Applications - Track - Performance Requirements for Fastening Systems - Part 2: Fastening Systems for Concrete Sleepers-Includes amendment A1: 08/2006 |
|
CEN EN 13481-4 |
Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers-Includes A1: August 2006 |
|
CEN EN 13481-8 |
Railway applications - Track - Performance requirements for fastening systems - Part 8: Fastening systems for track with heavy axle loads |
|
CEN EN 13495 |
Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS)(foam block test) |
|
CEN EN 13496 |
Thermal insulation products for building applications Determination of the mechanical properties of glass fibre meshes |
|
CEN EN 13498 |
Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS) |
|
CEN EN 13499 |
Thermal insulation products for buildings External thermal insulation composite systems (ETICS) based on expanded polystyrene Specification |
|
CEN EN 13502 |
Chimneys Requirements and test methods for clay/ceramic flue terminals |
|
CEN EN 13525 |
Forestry machinery - Wood chippers - Safety-Incorporates Amendment A1: 2007 |
|
CEN EN 13527 |
Shutters and Blinds - Measurement of Operating Force - Test Methods |
|
CEN EN 13538-1 |
Determination of Dimensional Characteristics of Sleeping Bags Part 1: Internal Dimensions |
|
CEN EN 1355 |
Determination of Creep Strains under Compression of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure |
|
CEN EN 13566-4 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Part 4: Lining with cured-in-place pipes |
|
CEN EN 13569 |
Cabinet Roller Towels - Performrnce Requirements and Processing |
|
CEN EN 13580 |
Products and systems for the protection and repair of concrete structures Test methods Water absorption and resistance to alkali for hydrophobic impregnations |
|
CEN EN 1359 |
Gas Meters - Diaphragm Gas Meters-Includes Amendment A1: 2006 |
|
CEN EN 13654-1 |
Soil Improvers and Growing Media - Determination of Nitrogen - Part 1: Modified Kjeldahl Method |
|
CEN EN 13687-1 |
Products and Systems for the Protection and Repair of Concrete Structures Test Methods Determination of Thermal Compatibility Part 1: Freeze-Thaw Cycling with De-Icing Salt Immersion |
|
CEN EN 13687-5 |
Products and Systems for the Protection and Repair of Concrete Structures Test Methods Determination of Thermal Compatibility Part 5: Resistance to Temperature Shock |
|
CEN EN 13693 |
Precast concrete products - Special roof elements |
|
CEN EN 13739-2 |
Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2: Test methods |
|
CEN EN 13747 |
Precast concrete products - Floor plates for floor systems |
|
CEN EN 13748-1 |
Terrazzo tiles - Part 1: Terrazzo tiles for internal use |
|
CEN EN 13750 |
Domestic water kettles for use on top of stove, cooker or hob Requirements and test methods |
|
CEN EN 13761 |
Office furniture - Visitors chairs |
|
CEN EN 13815 |
Fibrous gypsum plaster casts - Definitions, requirements and test methods |
|
CEN EN 13831 |
Closed expansion vessels with built in diaphragm for installation in water |
|
CEN EN 13834 |
Cookware - Ovenware for Use in Conventional Domestic Ovens |
|
CEN EN 13836 |
Gas fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1 000 kW |
|
CEN EN 1384 |
Helmets for Equestrian Activities-Includes Amendment A1:2001 |
|
CEN EN 13855-1 |
Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 1: Test method by rotation |
|
CEN EN 13855-2 |
Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 2: Test method by oscillation |
|
CEN EN 13863-3 |
Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores |
|
CEN EN 13880-4 |
Hot applied joint sealants - Part 4: Test method for the determination of heat resistance - Change in penetration value |
|
CEN EN 13892-2 |
Methods of test for screed materials Part 2: Determination of flexural and compressive strength |
|
CEN EN 13892-6 |
Methods of test for screed materials Part 6: Determination of surface hardness |
|
CEN EN 13892-7 |
Methods of test for screed materials Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings |
|
CEN EN 13893 |
Resilient, laminate and textile floor coverings Measurement of dynamic coefficient of friction on dry floor surfaces |
|
CEN EN 13899 |
Roller sports equipment Roller skates Safety requirements and test methods |
|
CEN EN 13914-1 |
Design, preparation and application of external rendering and internal plastering External rendering |
|
CEN EN 13914-2 |
Design, preparation and application of external rendering and internal plastering - Part 2: Design considerations and essential principles for internal plastering |
|
CEN EN 13948 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to root penetration |
|
CEN EN 13950 |
Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
|
CEN EN 13978-1 |
Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions |
|
CEN EN 14 |
Dimensions of Bed Blankets |
|
CEN EN 1400-3 |
Child use and care articles Soothers for babies and young children Part 3: Chemical requirements and tests |
|
CEN EN 14073-3 |
Office furniture - Storage furniture - Part 3: Test methods for the determination of stability and strength of the structure |
|
CEN EN 14114 |
Hygrothermal Performance of Building Equipment and Industrial Installations - Calculation of Water Vapour Diffusion - Cold Pipe Insulation Systems |
|
CEN EN 14187-2 |
Cold applied joint sealants - Part 2:Test method for the determination of tack free time |
|
CEN EN 14187-3 |
Cold applied joint sealants Part 3: Test method for the determination of self-levelling properties |
|
CEN EN 14187-4 |
Cold applied joint sealants - Part 4: Test method for the determination of the change in mass and volume after immersion in test fuel |
|
CEN EN 14187-6 |
Cold applied joint sealants - Part 6: Test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids |
|
CEN EN 14221 |
Timber and wood-based materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications |
|
CEN EN 14227-4 |
Hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures |
|
CEN EN 14236 |
Ultrasonic Domestic Gas Meters |
|
CEN EN 14240 |
Ventilation for buildings Chilled ceilings Testing and rating |
|
CEN EN 14241-1 |
Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners |
|
CEN EN 14268 |
Irrigation techniques - Meters for irrigation water |
|
CEN EN 14364 |
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints-Supersedes EN 1115-1:1997, EN 1115-3:1996, EN 1115-5:1996, EN 1636-3:1997, EN 1636-5:1997 |
|
CEN EN 1437 |
Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading |
|
CEN EN 14383-1 |
Prevention of crime - Urban planning and building design - Part 1: Definition of specific terms |
|
CEN EN 14468-2 |
Table tennis Part 2: Posts for net assemblies Requirements and test methods |
|
CEN EN 14488-7 |
Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete |
|
CEN EN 14496 |
Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods |
|
CEN EN 14497 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability |
|
CEN EN 14501 |
Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification |
|
CEN EN 14516 |
Baths for domestic purposes |
|
CEN EN 1456-1 |
Plastics Piping Systems for Buried and Above-Ground Drainage and Sewage Under Pressure - Unplasticized Poly(Vinyl Chloride) (PVC-U) - Part 1: Specifications for Piping Components and the System |
|
CEN EN 14575 |
Geosynthetic barriers - Screening test method for determining the resistance to oxidation |
|
CEN EN 14580 |
Natural stone test methods Determination of static elastic modulus |
|
CEN EN 14600 |
(FAULTY STANDARD) Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification |
|
CEN EN 1463-2 |
Road Marking Materials - Retroreflecting Road Studs - Part 2: Road Test Performance Specifications |
|
CEN EN 14653-2 |
Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test |
|
CEN EN 14654-1 |
Management and control of cleaning operations in drains and sewers - Part 1: Sewer cleaning |
|
CEN EN 1467 |
Natural stone Rough blocks Requirements |
|
CEN EN 14688 |
Sanitary appliances - Wash basins - Functional requirements and test methods |
|
CEN EN 14694 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment |
|
CEN EN 14697 |
Textiles - Terry towels and terry towel fabrics - Specification and methods of test |
|
CEN EN 14731 |
Execution of special geotechnical works - Ground treatment by deep vibration |
|
CEN EN 14743 |
Water conditioning equipment inside buildings - Softeners - Requirements for performance, safety and testing-Incorporates Amendment A1:6/2007 |
|
CEN EN 14749 |
Domestic and kitchen storage units and worktops - Safety requirements and test methods-Supersedes EN 1153:1995 and EN 1727:1998 |
|
CEN EN 14801 |
Conditions for pressure classification of products for water and wastewater pipelines |
|
CEN EN 14812 |
Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing-Incorporates Amendment A1: 6/2007 |
|
CEN EN 14837 |
Surfaces for sports areas - Determination of slip resistance |
|
CEN EN 14844 |
Precast concrete products - Box culverts |
|
CEN EN 14908-1 |
Open Data Communication in Building Automation, Controls and Building Management - Building Network Protocol - Part 1: Protocol Stack-Supersedes ENV 13154-2: 1998 |
|
CEN EN 14908-2 |
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication-Supersedes ENV 13154-2: 1998 |
|
CEN EN 14930 |
Agricultural and forestry machinery and gardening equipment Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces |
|
CEN EN 14952 |
Surfaces for sports areas - Determination of water absorption of unbound minerals |
|
CEN EN 14956 |
Surfaces for sports areas - Determination of water content of unbound mineral surfaces for outdoor sports areas |
|
CEN EN 14964 |
Rigid underlays for discontinuous roofing - Definitions and characteristics |
|
CEN EN 14974 |
Facilities for users of roller sports equipment - Safety requirements and test methods |
|
CEN EN 15036-1 |
Heating boilers Test regulations for airborne noise emissions from heat generators Part 1: Airborne noise emissions from heat generators |
|
CEN EN 1504-6 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar |
|
CEN EN 1508 |
Water Supply - Requirements for Systems and Components for the Storage of Water |
|
CEN EN 1517 |
Surfaces for Sports Areas - Determination of Resistance to Impact |
|
CEN EN 15184 |
Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) |
|
CEN EN 1520 |
Prefabricated reinforced components of lightweight aggregate concrete with open structure-Incorporating corrigendum May 2003 |
|
CEN EN 15219 |
Water equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing |
|
CEN EN 15265 |
Energy performance of buildings - Calculation of energy needs for space heating and cooling using dynamic methods - General criteria and validation procedures |
|
CEN EN 15316-4-3 |
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3: Heat generation systems, thermal solar systems |
|
CEN EN 15318 |
Design and application of gypsum blocks |
|
CEN EN 1536 |
Execution of Special Geotechnical Work - Bored Piles |
|
CEN EN 154 |
Ceramic Tiles - Determination of Resistance to Surface Abrasion - Glazed Tiles |
|
CEN EN 155 |
Ceramic Tiles - Determination of Moisture Expansion Using Boiling Water - Unglazed Tiles |
|
CEN EN 1552 |
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems |
|
CEN EN 15550 |
Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion |
|
CEN EN 1566-1 |
Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Chlorinated Poly(Vinyl Chloride) (PVC-C) - Part 1: Specifications for Pipes, Fittings and the System |
|
CEN EN 1609 |
Thermal Insulating Products for Building Applications - Determination of Short Term Water Absorption by Partial Immersion-Incorporating A1: September 2006 |
|
CEN EN 162 |
Methods of Testing Doors: Soft and Heavy Body Impact Test on Door Leaves |
|
CEN EN 1727 |
Domestic Furniture - Storage Furniture - Safety Requirements and Test Methods-Ratified European Text |
|
CEN EN 1737 |
Determination of Shear Strength of Welded Joints of Reinforcement Mats or Cages for Prefabricated Components Made of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure |
|
CEN EN 1741 |
Determination of Shear Strength for out-of-Plane Forces of Joints between Prefabricated Components Made of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure |
|
CEN EN 1744-3 |
Tests for Chemical Properties of Aggregates - Part 3: Preparation of Eluates by Leaching of Aggregates |
|
CEN EN 1744-4 |
Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures |
|
CEN EN 1775 |
Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
|
CEN EN 1793-1 |
Road Traffic Noise Reducing Devices - Test Method for Determining the Acoustic Performance - Part 1: Intrinsic Charateristics of Sound Absorption |
|
CEN EN 1793-2 |
Road Traffic Noise Reducing Devices - Test Method for Determining the Acoustic Performance - Part 2: Intrinsic Charateristics of Airborne Sound Insulation |
|
CEN EN 1804-2 |
Machines for Underground Mines - Safety Requirements for Hydraulic Powered Roof Supports - Part 2: Power Set Legs and Rams |
|
CEN EN 1806 |
Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods-:2000 |
|
CEN EN 1815 |
Resilient and Textile Floor Coverings - Assessment of Static Electrical Propensity |
|
CEN EN 1838 |
Lighting Applications - Emergency Lighting |
|
CEN EN 1850-1 |
Flexible Sheets for Waterproofing - Determination for Visible Defects - Part 1: Bitumen Sheets for Roof Waterproofing |
|
CEN EN 1856-1 |
Chimneys Requirements for metal chimneys Part 1: System chimney products-Includes Amendment A1:05/2006 |
|
CEN EN 1856-2 |
Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pip |
|
CEN EN 1859 |
Chimneys - Metal Chimneys - Test Methods-Incorporating Amendment A1: June 2006 |
|
CEN EN 1860-3 |
Appliances, solid fuels and firelighters for barbecuing - Part 3 : Firelighters for igniting solid fuels for use in barbecue appliances - Requirements and test methods-Incorporates Amendment 1: February 2006 |
|
CEN EN 1877-2 |
Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Reactive Functions Related to Epoxy Resins - Part 2: Determination of Amine Functions Using the Total Basicity Number |
|
CEN EN 1881 |
Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method |
|
CEN EN 1886 |
Ventilation for Buildings - Air Handling Units - Mechanical Performance |
|
CEN EN 1916 |
Concrete pipes and fittings, unreinforced, steel fibre and reinforced-Incorporating corrigendum December 2006 |
|
CEN EN 196-9 |
Methods of testing cement - Part 9: Heat of hydration - Semi-adiabatic method |
|
CEN EN 1999-1-3 |
Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue |
|
CEN EN 203-1 |
Gas heated catering equipment - Part 1: General safety rules |
|
CEN EN 23270 |
Paints and Varnishes and Their Raw Materials - Temperatures and Humidities for Conditioning and Testing |
|
CEN EN 248 |
Sanitary Tapware - General specification for electrodeposited coatings of Ni-Cr |
|
CEN EN 259-2 |
Wallcoverings in Roll Form - Heavy Duty Wallcoverings - Part 2: Determination of Impact Resistance |
|
CEN EN 274 |
Sanitary Tapware - Waste Fittings for Basins, Bidets and Baths - General Technical Specifications |
|
CEN EN 28970 |
Timber Structures - Testing of Joints Made with Mechanical Fasteners - Requirements for Wood Density |
|
CEN EN 31 |
Pedestal Wash Basins - Connecting Dimensions-Ratified European Text |
|
CEN EN 35 |
Pedestal Bidets with Oven-Rim Supply - Connection Dimensions |
|
CEN EN 383 |
Timber Structures - Test Methods - Determination of Embedment Strength and Foundation Values for Dowel Type Fasteners |
|
CEN EN 40-3-1 |
Lighting Columns - Part 3-1: Design and Verification - Specification for Characteristic Loads-Supersedes EN 40-6: 1982 |
|
CEN EN 40-7 |
Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns-Supersedes CR 40-7: 1984 |
|
CEN EN 40-9 |
Lighting Columns - Part 9: Special Requirements for Reinforced and Prestressed Concrete Lighting Columns |
|
CEN EN 413-1 |
Masonry cement - Part 1: Composition, specifications and conformity criteria |
|
CEN EN 427 |
Resilient Floor Coverings - Determination of the Side Length, Squareness and Straightness of Tiles |
|
CEN EN 43 |
Methods of Testing Doors: Behaviour Under Humidity Variations of Door Leaves Placed in Successive Uniform Climates-Superseded By EN 1294:2000 |
|
CEN EN 432 |
Resilient Floor Coverings - Determination of Shear Force |
|
CEN EN 446 |
Grout for prestressing tendons - Grouting procedures |
|
CEN EN 449 |
Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters) |
|
CEN EN 450-2 |
Fly ash for concrete - Part 2: Conformity evaluation-Supersedes EN 450:1994 |
|
CEN EN 480-13 |
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures |
|
CEN EN 484 |
Specification for Dedicated Liquefied Petroleum Gas Appliances - Independent Hotplates, Including Those Incorporating a Grill for Outdoor Use |
|
CEN EN 494 |
Fibre-cement profiled sheets and fittings - Product specification and test methods-Incorporates Amendment A3: March 2007 |
|
CENELEC EN 50065-4-7 |
Signalling on lowvoltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz Part 4-7: Portable low voltage decoupling filters - Safety requirements-Incorporating corrigendum October 2006 |
|
CENELEC EN 50087 |
Safety of Household and Similar Electrical Appliances Particular Requirements for Bulk- Milk Coolers |
|
CENELEC EN 50090-2-2 |
Home and Building Electronic Systems (HBES) Part 2-2: System Overview - General Technical Requirements-Includes Amendment A1:2002 |
|
CEN EN 50470-3 |
Electricity metering equipment (a.c.) Part 3: Particular requirements - Static meters for active energy (class indexes A, B and C) |
|
CEN EN 524-5 |
Steel Strip Sheaths for Prestressing Tendons - Test Methods - Part 5: Determination of Tensile Load Resistance |
|
CEN EN 524-6 |
Steel Strip Sheaths for Prestressing Tendons - Test Methods - Part 6: Determination of Leaktightness (Determination of Water Loss) |
|
CEN EN 534 |
Corrugated Bitumen Sheets - Product Specification and Test Methods |
|
CEN EN 548 |
Resilient Floor Coverings - Specification for Plain and Decorative Linoleum-Incorporating corrigendum April 2007 |
|
CEN EN 566 |
Mountaineering Equipment - Slings - Safety Requirements and Test Methods |
|
CEN EN 595 |
Timber Structures - Test Methods - Test of Trusses for the Determination of Strength and Deformation Behaviour |
|
CEN EN 597-2 |
Furniture - Assessment of the Ignitability of Mattresses and Upholstered Bed Bases - Part 2: Ignition Source: Match Flame Equivalent |
|
CENELEC EN 60299 |
Household Electric Blankets Methods of Measuring Performance (IEC 299 : 1994) |
|
CENELEC EN 60311 |
Electric irons for household or similar use Methods for measuring performance-Includes Amendment A1:2006; IEC 60311:2002 + A1:2005 |
|
CENELEC EN 60335-2-106 |
Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings |
|
CENELEC EN 60335-2-57 |
Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Ice-Cream Appliances with Incorporated Motor-Compressors-Superseded by BS EN 60335-2-24:2000 |
|
CENELEC EN 60704-2-11 |
Household and Similar Electrical Appliances - Test Code for the Determination of Airborne Acoustical Noise - Part 2-11: Particular Requirements for Electrically Operated Food Preparation Appliances-IEC 60704-2-11: 1998 |
|
CENELEC EN 61242 |
Electrical accessories Cable reels for household and similar purposes-IEC 1242:1995, Modified; Including Amendment A11: January, 2004; Including Amendment A12: March, 2006 |
|
CEN EN 613 |
Independent gas-fired convection heaters-Includes amendment A1:2003; Supersedes HD 1002:1994 |
|
CENELEC EN 62020 |
Electrical Accessories Residual Current Monitors for Household and Similar Uses (RCMs)-Includes Amendment A1:2005; IEC 62020:1998 |
|
CEN EN 627 |
Specification for Data Logging and Monitoring of Lifts, Escalators and Passenger Conveyors |
|
CEN EN 709 |
Agricultural and Forestry Machinery - Pedestrian Controlled Tractors with Mounted Rotary Cultivators, Motor Hoes, Motor Hoes with Drive Wheel(s) - Safety |
|
CEN EN 71-4 |
Safety of Toys - Part 4: Experimental Sets for Chemistry and Related Activities-Incorporates Amendments A1: 04/1998; A2: 07/2003; A3: 05/2007 |
|
CEN EN 74-1 |
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures-:1988 |
|
CEN EN 747-2 |
Furniture - Bunk Beds for Domestic Use - Part 2: Test Methods |
|
CEN EN 771-2 |
Specification for masonry units - Part 2: Calcium silicate masonry units-Includes Amendment A1:2005 |
|
CEN EN 771-5 |
Specification for masonry units - Part 5: Manufactured stone masonry units-Includes amendment A1:2005 |
|
CEN EN 771-6 |
Specification for Masonry Units - Part 6: Natural Stone Masonry Units |
|
CEN EN 772-14 |
Methods of Test for Masonry Units - Part 14: Determination of Moisture Movement of Aggregate Concrete and Manufactured Stone Masonry Units |
|
CEN EN 772-18 |
Methods of Test for Masonry Units - Part 18: Determination of Freeze-Thaw Resistance of Calcium Silicate Masonry Units |
|
CEN EN 772-6 |
Methods of Test for Masonry Units - Part 6: Determination of Bending Tensile Strength of Aggregate Concrete Masonry Units-Ratified European Text:8/18/2001 |
|
CEN EN 772-7 |
Methods of Test for Masonry Units - Part 7: Determination of Water Absorption of Clay Masonry Damp Proof Course Units by Boiling in Water |
|
CEN EN 786 |
Garden Equipment - Electrically Powered Walk-Behind and Hand-Held Lawn Trimmers and Lawn Edge Trimmers - Mechanical Safety-Includes Amendment A1: 2001; Incorporates Corrigendum August 1996 |
|
CEN EN 81-70 |
Safety rules for the construction and installations of lifts Particular applications for passenger and good passengers lifts - Part 70: Accessibility to lifts for persons including persons with disability |
|
CEN EN 823 |
Thermal Insulating Products for Building Applications - Determination of Thickness |
|
CEN EN 826 |
Thermal Insulating Products for Building Applications - Determination of Compression Behaviour |
|
CEN EN 832 |
Thermal Performance of Buildings - Calculation of Energy Use for Heating - Residential Buildings-Incorporating Corrigendum May 2000 |
|
CEN EN 834 |
Heat Cost Allocators for the Determination of the Consumption of Room Heating Radiators - Appliances with Electrical Energy Supply |
|
CEN EN 835 |
Heat Cost Allocators for the Determination of the Consumption of Room Heating Radiators - Appliances Without an Electrical Energy Supply, Based on the Evaporation Principle |
|
CEN EN 846-11 |
Methods of Test for Ancillary Components for Masonry - Part 11: Determination of Dimensions and Bow of Lintels |
|
CEN EN 846-13 |
Methods of Test for Ancillary Components for Masonry - Part 13: Determination of Resistance to Impact, Abrasion and Corrosion of Organic Coatings |
|
CEN EN 846-3 |
Methods of Test for Ancillary Components for Masonry - Part 3: Determination of Sheer Load Capacity of Welds in Prefabricated Bed Joint Reinforcement |
|
CEN EN 846-9 |
Methods of Test for Ancillary Components for Masonry - Part 9: Determination of Flexural Resistance and Shear Resistance of Lintels |
|
CEN EN 87-1 |
Ceramic Floor and Wall Tiles - Part 1: Specification for Classification and Marking, Including Definitions and Characteristics |
|
CEN EN 932-3 |
Tests for general properties of aggregates Part 3: Procedure and terminology for simplified petrographic description-Includes Amendment A1:2003 |
|
CEN EN 932-5 |
Tests for General Properties of Aggregates - Part 5: Common Equipment and Calibration |
|
CEN EN 933-7 |
Tests for Geometrical Properties of Aggregates - Part 7: Determination of Shell Content - Percentage of Shells in Coarse Aggregates |
|
CEN EN 933-9 |
Tests for Geometrical Properties of Aggregates - Part 9: Assessment of Fines - Methylene Blue Test-Ratified European Text |
|
CEN EN 934-4 |
Admixtures for concrete, mortar and grout - Admixtures for grout for prestressing tendons - Part 4: Definitions, requirements, conformity, marking and labelling-Includes amendment A1:2004 |
|
CEN EN 934-5 |
Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling |
|
CEN EN 934-6 |
Admixtures for Concrete, Mortar and Grout - Part 6: Sampling, Conformity Control and Evaluation of Conformity-Includes amendment A1:2005 |
|
CEN EN 957-4 |
Stationary Training Equipment - Part 4: Strength Training Benches, Additional Specific Safety Requirements and Test Methods |
|
CEN EN 957-5 |
Stationary Training Equipment - Part 5: Pedal Crank Training Equipment, Additional Specific Safety Requirements and Test Methods |
|
CEN EN 957-7 |
Stationary Training Equipment - Part 7: Rowing Machines, Additional Specific Safety Requirements and Test Methods |
|
CEN EN 98 |
Ceramic Tiles - Determination of Dimensions and Surface Quality |
|
CEN EN 99 |
Ceramic Tiles - Determination of Water Absorption |
|
CEN EN 998-2 |
Specification for mortar for masonry Part 2: Masonry mortar |
|
CEN EN ISO 10248 |
Fluid Fertilizers - De-Aeration of Suspensions Samples by Film Disentrainment-ISO 10248:1996 |
|
CEN EN ISO 10426-5 |
Petroleum and natural gas industries - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure-ISO 10426-5:2004 |
|
CEN EN ISO 10472-2 |
Safety Requirements for Industrial Laundry Machinery - Part 2: Washing Machines and Washer-Extractors-Corrected 1998-04-09; ISO 10472-2:1997 |
|
CEN EN ISO 10545-11 |
Ceramic Tiles Part 11: Determination of Crazing Resistance for Glazed Tiles-Supersedes EN 105: 1991 |
|
CEN EN ISO 10545-8 |
Ceramic Tiles - Part 8: Determination of Linear Thermal Expansion-Supersedes EN 103: 1991; ISO 10545-8: 1994 |
|
CEN EN ISO 10545-9 |
Ceramic Tiles Part 9: Determination of Resistance to Thermal Shock-Supersedes EN 104: 1991 |
|
CEN EN ISO 10590 |
Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water-(ISO 10590): 2005 |
|
CEN EN ISO 10591 |
Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water-(ISO 10591): 2005 |
|
CEN EN ISO 11125-1 |
Preparation of Steel Substrates before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 1: Sampling-ISO 11125-1: 1993 |
|
CEN EN ISO 11125-7 |
Preparation of Steel Substrates before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 7: Determination of Moisture-ISO 11125-7: 1993 |
|
CEN EN ISO 11127-2 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non-Metallic Blast-Cleaning Abrasives - Part 2: Determination of Perticle Size Distribution-ISO 11127-2: 1993 |
|
CEN EN ISO 11600 |
Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002)-ISO 11600:2002 |
|
CEN EN ISO 11668 |
Binders for Paints and Varnishes - Chlorinated Polymerization Resins - General Methods of Test-ISO 11668:1997 |
|
CEN EN ISO 11680-2 |
Machinery for Forestry - Safety Requirements and Testing for Pole-Mounted Powered Pruners - Part 2: Units for Use with a Back-Pack Power Source-ISO 11680-2:2000; Incorporating Corrigendum July 2002 |
|
CEN EN ISO 11806 |
Agricultural and Forestry Machinery - Portable Hand-Held Combustion Engine Driven Brush Cutters and Grass Trimmers - Safety-ISO 11806: 1997 |
|
CEN EN ISO 13787 |
Thermal insulation products for building equipment and industrial installations Determination of declared thermal conductivity-ISO 13787:2003 |
|
CEN EN ISO 13903 |
Animal feeding stuffs - Determination of amino acids content-ISO 13903: 2005 |
|
CEN EN ISO 13904 |
Animal feeding stuffs Determination of tryptophan content-ISO 13904: 2005 |
|
CEN EN ISO 1401 |
Rubber Hoses for Agricultural Spraying-ISO 1401: 1999 |
|
CEN EN ISO 140-14 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 14: Guidelines for special situations in the field-ISO 140-14:2004 |
|
CEN EN ISO 140-16 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 16: Laboratory measurement of the sound reduction index improvement by additional lining-ISO 140-16:2006 |
|
CEN EN ISO 15148 |
Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion-ISO 15148: 2002 |
|
CEN EN ISO 15181-3 |
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 3: Calculation of the zinc ethylenebis( dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract |
|
CEN EN ISO 1524 |
Paints, varnishes and printing inks Determination of fineness of grind-ISO 1524: 2000; Supersedes EN 21524: 1991 |
|
CEN EN ISO 15711 |
Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water-ISO 15711:2003 |
|
CEN EN ISO 15874-5 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system-ISO 15874-5:2003 |
|
CEN EN ISO 15875-5 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system-ISO 15875-5:2003 |