|
CEN EN ISO 11126-1 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning Abrasives - Part 1: General Introduction and Classification-ISO 11126-1: 1993, Including Technical Corrigenda 1: 1997 and 2: 1997 |
|
CEN EN ISO 11126-5 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast- Cleaning Abrasives - Part 5: Nickel Refrinery Slag-ISO 11126-5: 1993 |
|
CEN EN ISO 11126-7 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Specifications for Non-Metallic Blast-Cleaning Abrasives - Part 7: Fused Aluminium Oxide-ISO 11126-7: 1995, Including Technical Corrigendum 1: 1999 |
|
CEN EN ISO 11127-3 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Test Methods for Non-Metallic Blast-Cleaning Abrasives - Part 3: Determination of Apparent Density-ISO 11127-3: 1993 |
|
CEN EN ISO 11127-4 |
Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 4: Assessment of hardness by a glass slide test-ISO 11127-4: 1993 |
|
CEN EN ISO 11680-1 |
Machinery for Forestry - Safety Requirements and Testing for Pole-Mounted Powered Pruners - Part 1: Units Fitted with Integral Combustion Engine-ISO 11680-1:2000; Incorporating Corrigendum July 2002 |
|
CEN EN ISO 11890-2 |
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method |
|
CEN EN ISO 11997-2 |
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light |
|
CEN EN ISO 12570 |
Hygrothermal Performance of Building Materials and Products - Determination of Moisture Content by Drying at Elevated Temperature-ISO 12570: 2000 |
|
CEN EN ISO 13370 |
Thermal Performance of Buildings - Heat Transfer via the Ground - Calculation Methods-ISO 13370:1998 |
|
CEN EN ISO 13790 |
Thermal performance of buildings Calculation of energy use for space heating-ISO 13790:2004 |
|
CEN EN ISO 13792 |
Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods-(ISO 13792):2005 |
|
CEN EN ISO 13803 |
Paints and varnishes Determination of reflection haze on paint films at 20 degrees-ISO 13803:2000 |
|
CEN EN ISO 140-18 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 18: Laboratory measurement of sound generated by rainfall on building elements-ISO 140-18:2006 |
|
CEN EN ISO 14181 |
Animal Feeding Stuffs - Determination of Residues of Organochlorine Pesticides - Gas Chromatographic Method-Ratified European Text; ISO 14181:2000 |
|
CEN EN ISO 14680-1 |
Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method |
|
CEN EN ISO 14680-3 |
Paints and varnishes - Determination of pigment content - Part 3: Filtration method |
|
CEN EN ISO 1517 |
Paints and Varnishes - Surface-Drying Test - Ballotini Method (ISO 1517 : 1973) |
|
CEN EN ISO 15181-1 |
Paints and varnishes Determination of release rate of biocides from antifouling paints Part 1: General method for extraction of biocides |
|
CEN EN ISO 15181-2 |
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate |
|
CEN EN ISO 1520 |
Paints and Varnishes - Cupping Test |
|
CEN EN ISO 15630-3 |
Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 3: Prestressing Steel-ISO 15630-3: 2002 |
|
CEN EN ISO 15710 |
Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
|
CEN EN ISO 15876-3 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings-ISO 15876-3:2003 |
|
CEN EN ISO 15876-5 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system-ISO 15876-5:2003 |
|
CEN EN ISO 15877-1 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General-ISO 15877-1:2003 |
|
CEN EN ISO 15877-2 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes-ISO 15877-2:2003 |
|
CEN EN ISO 15877-5 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system-ISO 15877-5 |
|
CEN EN ISO 16276-1 |
Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pulloff testing |
|
CEN EN ISO 16409 |
Dentistry - Oral hygiene products - Manual interdental brushes-ISO 16409:2006 |
|
CEN EN ISO 16484-2 |
Building automation and control systems (BACS) Part 2: Hardware-ISO 16484-2:2004 |
|
CEN EN ISO 16484-5 |
Building automation and control systems - Part 5: Data communication protocolcity-ISO 16484-5:2003; Supersedes ENV 1805-1:1998 |
|
CEN EN ISO 16663-2 |
Fishing nets Method of test for the determination of mesh size Part 2: Length of mesh-ISO 16663-2:2003; Incorporating Corrigendum April 2006 |
|
CEN EN ISO 16773-1 |
Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 1: Terms and definitions |
|
CEN EN ISO 16862 |
Paints and varnishes - Evaluation of sag resistance |
|
CEN EN ISO 20567-2 |
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body |
|
CEN EN ISO 21227-3 |
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe |
|
CEN EN ISO 22721 |
Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining |
|
CEN EN ISO 2810 |
Paints and varnishes - Natural weathering of coatings - Exposure and assessment-ISO 2810:2004 |
|
CEN EN ISO 3262-13 |
Extenders for Paints - Specifications and Methods of Test - Part 13: Natural Quartz (Ground)-ISO 3262-13:1997 |
|
CEN EN ISO 3262-14 |
Extenders for Paints - Specifications and Methods of Test - Part 14: Cristobalite-ISO 3262-14:2000 |
|
CEN EN ISO 3262-21 |
Extenders for Paints - Specifications and Methods of Test - Part 21: Silica Sand (Unground Natural Quartz)-ISO 3262:2000 |
|
CEN EN ISO 3262-7 |
Extenders for Paints - Specifications and Methods of Test - Part 7: Dolomite-ISO 3262-7:1998 |
|
CEN EN ISO 3549 |
Zinc dust pigments for paintd - Specifications and test methods-ISO 3549:1995 |
|
CEN EN ISO 4618 |
Paints and varnishes - Terms and definitions-ISO 4618:2006; Supersedes EN 971-1:1996, EN ISO 4618-2:1999, EN ISO 4618-3:1999 |
|
CEN EN ISO 4628-4 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking-ISO 4628-4:2003 |
|
CEN EN ISO 4628-7 |
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 7: Assessment of degree of chalking by velvet method-ISO 4628-7:2003 |
|
CEN EN ISO 6504-3 |
Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
|
CEN EN ISO 787-13 |
General Methods of Test for Pigments and Extenders - Part 13: Determination of Water-Soluble Sulfates, Chlorides and Nitrates-ISO 787-13: 2002 |
|
CEN EN ISO 787-2 |
General Methods of Test for Pigments and Extenders - Part 2: Determination of Matter Volatile at 105 Degrees C (ISO 787-2: 1981) |
|
CEN EN ISO 787-24 |
General Methods of Test for Pigments and Extenders - Part 24: Determination of Relative Tinting Strength of Coloured Pigments and Relative Scattering Power of White Pigments - Photometric Methods (ISO 787-24 : 1985) |
|
CEN EN ISO 787-3 |
General Methods of Test for Pigments and Extenders - Part 3: Determination of Matter Soluble in Water - Hot Extraction Method-ISO 787-3:2000 |
|
CEN EN ISO 8340 |
Building construction - Sealants - Determination of tensile properties at maintained extension-ISO 8340: 2005; Supersedes EN 28340: 1990 |
|
CEN EN ISO 8442-1 |
Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 1: Requirements for Cutlery for the Preparation of Food-ISO 8442-1: 1997 |
|
CEN EN ISO 8442-4 |
Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 4: Requirements for Gold-Plated Cutlery-ISO 8442-4: 1997 |
|
CEN EN ISO 8442-6 |
Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 6: Lightly Silver Plated Table Holloware Protected by Lacquer-ISO 8442-6:2000 |
|
CEN EN ISO 8442-8 |
Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 8: Specification for Silver Table and Decorative Holloware-ISO 8442-8:2000 |
|
CEN EN ISO 9020 |
Binders for Paints and Varnishes - Determination of Free-Formaldehyde Content of Amino Resins - Sodium Sulfite Titrimetric Method-ISO 9020: 1994, Including Technical Corrigendum 1: 1996 |
|
CEN EN ISO 9038 |
Test for sustained combustibility of liquids-ISO 9038:2002 |
|
CEN EN ISO 9288 |
Thermal Insulation - Heat Transfer by Radiation - Physical Quantities and Definitions (ISO 9288 : 1989) |
|
CEN ENV 12521 |
Domestic Furniture - Tables - Mechanical and Structural Safety Requirements |
|
CEN ENV 1329-2 |
Plastic Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Unplasticized Poly(Vinyl Chloride) (PVC-U) - Part 2: Guidance for the Assessment of Conformity |
|
CEN ENV 13459-1 |
Road Marking Materials - Quality Control - Part 1: Sampling from Storage and Testing |
|
CEN ENV 13563 |
Traffic Control Equipment - Vehicle Detectors |
|
CEN ENV 13759 |
Domestic Furniture - Seating - Test Method for the Determination of the Durability of Reclining and/or Tilting Mechanisms and Operating Mechanisms for Convertible Sofa Beds |
|
CEN ENV 13801 |
Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Thermoplastics - Recommended Practice for Installation |
|
CEN ENV 14166 |
Foodstuffs - Determination of Vitamin B6 by Microbiological Assay |
|
CEN ENV 1453-2 |
Plastics Piping Systems with Structured Wall Pipes for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl Chloride)(PVC-U) - Part 2: Guidance for the Assessment of Conformity |
|
CEN ENV 1519-2 |
Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Polyethylene (PE) - Part 2: Guidance for the Assessment of Conformity |
|
CEN ENV 1565-2 |
Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Styrene Copolymer Blends (SAN+PVC) - Part 2: Guidance for the Assessment of Conformity |
|
CEN ENV 1630 |
Windows, Doors, Shutters - Burglar Resistance - Test Method for the Determination of Resistance to Manual Burglary Attempts |
|
CEN ENV 413-1 |
Masonry Cement Part 1: Specification |
|
CENELEC HD 193 S2 |
Voltage Bands for Electrical Installations of Buildings |
|
CENELEC HD 251.2 |
General Specification for Electric Cooking and Heating Appliances for Household and Similar Purposes |
|
CENELEC HD 253 |
Particular Specification for Electric Irons, Ironess and Pressing Machines |
|
CENELEC HD 253 S3/ A1 |
AMD 1 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Electric Irons |
|
CENELEC HD 260 |
Particular Specification for Coffee Grinders and Mills |
|
CENELEC HD 261 S1 |
Particular Specification for Kitchen Machines |
|
CENELEC HD 262.2 |
Particular Specification for Portable Immersion Heaters |
|
CENELEC HD 264 S2 |
Safety of Household and Similar Electrical Appliances - Particular Requirements for Appliances for Heating Liquids (CENELEC EN 60335-2-15: 1990) |
|
CENELEC HD 265 S2/ A1 |
AMD 1 Safety of Household and Similar Electrical Appliances - Particular Requirements for Appliances for Toasters, Grills, Roasters and Similar Appliances |
|
CENELEC HD 266 |
Particular Specification for Appliances for Skin or Hair Treatment |
|
CENELEC HD 268 S2 |
Safety of Household and Similar Electrical Appliances- Particular Requirements for Tumble Dryers |
|
CENELEC HD 269 S2 |
Safety of Household and Similar Electrical Appliances- Part: Particular Requirements for Refrigerators and Food Freezers |
|
CENELEC HD 271 S1/ A2 |
AMD 2 Safety of Household and Similar Electrical Appliances Particular Requirements for Electric Toys Supplied at Safety Extra-Low Voltage-Superseded by EN 50088:1996 |
|
CENELEC HD 271 S1/ PRA4 |
Draft Amendment To HD 271 S1 Safety of Household and Similar Electrical Appliances - Particular Requirements for Electric Toys Supplied at Safety Extra-Low Voltage-Superseded bt EN 50088:1996 |
|
CENELEC HD 272 S3 |
Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Ultra-Violet and Infra- Red Radiation Skin Treatment Appliances for Household Use |
|
CENELEC HD 274 S1 |
Requirements for the Connection of Washing Machines and Dishwashers to the Water Supply Mains |
|
CENELEC HD 275 S1/ A1 |
AMD 1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Cooking Ranges, Cooking Tables, Ovens and Similar Appliances for Household Use |
|
CENELEC HD 278 S1 |
Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heaters-Superseded by EN 60335-2-30: 1992 |
|
CENELEC HD 282 S1/A1 |
AMD 1 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Instantaneous Water Heaters |
|
CENELEC HD 283 S1 |
Safety of Household and Similar Electrical Appliances Particular Requirement for the Maximum Temperature Allowed for the Surfaces of Air-Outlet Grilles of Thermal Storage Room Heating Appliances-Superseded by EN 60335-2-61:1996 |
|
CENELEC HD 284 S1/ A1 |
AMD 1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Commercial Electric Ranges, Ovens and Hob Elements |
|
CENELEC HD 287 S1/ A1 |
AMD 1 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Commercial Electric Multi-Purpose Cooking Pans |
|
CENELEC HD 288 S1 |
Safety of Household and Similar Electric Appliances - Part 2: Particular Requirements for Commercial Electric Forced Convection Ovens |
|
CENELEC HD 360 S2 |
Circular Rubber Insulated Lift Cables for Normal Use |
|
CENELEC HD 361 S2/ A3 |
AMD 3 System for Cable Designation |
|
CENELEC HD 384.3 S2 |
Electrical Installations of Buildings Part 3: Assessment of General Characteristics (IEC 364-3:1993, Modified) |
|
CENELEC HD 384.4.41 S1/PRA1 |
AMD 1 Electrical Installations of Buildings Part 4: Protection for Safety Chapter 41: Protection Against Electric Shock |
|
CENELEC HD 384.4.47 S1 |
Electrical Installations of Buildings Part 4: Protection for Safety Chapter 47: Application of Protective Measures for Safety Section 470 - General - Section 471 - Measures of Protection Against Electric Shock |
|
CENELEC HD 384.4.473 |
Electrical Installations of Buildings Part 4: Protection for Safety Chapter 47: Application of Protective Measures Section 473: Protection Against Overcurrent |
|
CEN ISO/DIS 14689.2 |
Geotechnical Engineering - Identification and Description of Rock |
|
CENELEC R072-001 |
List of Interpretations on the EN 60730 Series |
|
CEN TR 196-4 |
Methods of testing cement - Part 4: Quantitative determination of constituents |