|
CENELEC EN 60423 |
Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
|
CENELEC EN 60447 |
Basic and safety principles for man-machine interface, marking and identification Actuating principles-IEC 60447:2004 |
|
CENELEC EN 60519-1 |
Safety in Electroheat Installations Part 1: General Requirements-IEC 60519-1:2003 |
|
CENELEC EN 60598-2-19 |
Luminaires Part 2: Particular requirements Section 19 Air-handling luminaires (safety requirements)-Includes amendment A2:1998; Incorporating Corrigendum December 2005; IEC 598-2-19:1981 |
|
CENELEC EN 60598-2-7 |
Luminaires Part 2: Particular Requirements Section Seven - Portable Luminaires for Garden Use-Includes Amendments A11: 1994 + A12: 1995 + A2: 1996 + A13: 1996; IEC 598-2-7: 1982 + A1: 1987 + A2: 1994, Modified |
|
CENELEC EN 60687 |
Alternating Current Static Watt-Hour Meters for Active Energy (Classes 0,2 S and 0,5 S)-Incorporates Corrigendum, January 1993; IEC 687: 1992 |
|
CENELEC EN 60695-4 |
Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products |
|
CENELEC EN 60811-3-1 |
Insulating and Sheathing Materials of Electric Cables - Common Test Methods - Part 3: Methods Specific to PVC Compounds - Section 1: Pressure Test at High Temperature - Tests for Resistance to Cracking-Includes Amendments A1:1996 and A2:2001; IEC 811-3-1:1985 + Corrigendum May 1986 + A1:1994 + A2:2001; Supersedes HD 505.3.1 S1:1989 |
|
CENELEC EN 60851-3 |
Winding wires Test methods Part 3: Mechanical properties-Includes amendments A1:1997 and A2:2003; IEC 60851-3:1996 + A1:1997 + A2:2003; Supersedes HD 490.3 S3:1993 |
|
CENELEC EN 61009-1 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) Part 1: General rules-IEC 61009-1:1996 + corr. 2003 + A1:2002, modified |
|
CENELEC EN 61034-1 |
Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus-IEC 61034-1: 2005; Supersedes EN 50268-1: 1999 |
|
CENELEC EN 61131-7 |
Programmable Controllers Part 7: Fuzzy Control Programming-IEC 61131-7:2000 |
|
CENELEC EN 61241-2-2 |
Electrical Apparatus for Use in the Presence of Combustible Dust Part 2: Test Methods Section 2: Method for Determining the Electrical Resistivity of Dust in Layers (IEC 1241-2-2 : 1993 + Corrigendum 1994) |
|
CENELEC EN 61347-2-4 |
Lamp Controlgear Part 2-4: Particular Requirements for D.C. Supplied Electronic Ballasts for General Lighting-Partly Supersedes EN 60924:1991 + A1:1994; IEC 61347-2-4:2000; Incorporating Corrigendum July 2003 |
|
CENELEC EN 61543 |
Residual current-operated protective devices (RCDs) for household and similar useElectromagnetic compatibility-Includes Amendments A11:2003, A12:2005 and A2:2006; IEC 61543:1995 |
|
CENELEC EN 61557-5 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth |
|
CENELEC EN 61558-2-19 |
Safety of Power Transformers, Power Supply Units and Similar Devices Part 2-19: Particular Requirements for Perturbation Attenuation Transformers-IEC 61558-2-19:2000 |
|
CENELEC EN 62040-1-2 |
Uninterruptible power systems (UPS) Part 1-2: General and safety requirements for UPS used in restricted access locations-IEC 62040-1-2:2002 + corrigendum 2002 + corrigendum 2004; |
|
CEN EN ISO 10666 |
Drilling Screws with Tapping Screw Thread - Mechanical and Functional Properties-ISO 10666:1999 |
|
CEN EN ISO 12777-2 |
Methods of Test for Pallet Joints - Part 2: Determination of Withdrawal and Head Pull-Through Resistance of Pallet Nails and Staples-ISO 12777-2:2000 |
|
CEN EN ISO 15614-11 |
Specificationa and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 11: Electron and Laser Beam Welding-ISO 15614-11:2002 |
|
CEN EN ISO 3977-5 |
Gas turbines Procurement Part 5: Applications for petroleum and natural gas industries-ISO 3977-5:2001 |
|
CEN EN ISO 4018 |
Hexagon Head Screws - Product Grade C-Supersedes EN 24018: 1991; ISO 4018: 1999 |
|
CEN EN ISO 5199 |
Technical Specifications for Centrifugal Pumps - Class II-ISO 5199: 2002 |
|
CEN EN ISO 6158 |
Metallic coatings - Electrodeposited coatings of chromium for engineering purposes-ISO 6158:2004 |
|
CEN EN ISO 7047 |
Countersunk Raised Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A (ISO 7047:1994) |
|
CEN EN ISO 8373 |
Manipulating Industrial Robots - Vocabulary (ISO 8373 : 1994) |
|
CEN EN ISO 8502-10 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 10: Field method for the titrimetric determination of water-soluble chloride-ISO 8502-10:1999 |
|
CEN EN ISO 9905 |
Technical Specifications for Centrifugal Pumps - Class I-Incorporating Corrigendum February 2005; ISO 9905: 1994 |
|
CEN EN ISO 9906 |
Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2-ISO 9906: 1999 |
|
CENELEC HD 21.4 S2 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 4: Sheathed Cables for Fixed Wiring |
|
CENELEC HD 22.1 S2/ A19 |
AMD 19 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements |
|
CEN CEN ISO/TR 3834-6 |
Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 |
|
CEN CEN/TS 15280 |
Evaluation of a.c. corrosion likelihood of buried pipelines Application to cathodically protected pipelines |
|
CEN EN 10216-4 |
Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties-Includes Amendment A1:2004 |
|
CEN EN 10312 |
Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption Technical delivery conditions |
|
CEN EN 12285-2 |
Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
|
CEN EN 12799 |
Brazing - Non-Destructive Examination of Brazed Joints-Amendment A1: December 2003 |
|
CEN EN 13530-2 |
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing-Incorporating Corrigendum August 2006; Incorporates Amendment A1: 2004 |
|
CEN EN 14399-2 |
High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading |
|
CEN EN 14423 |
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
|
CEN EN 14730-1 |
Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
|
CEN EN 15112 |
External cathodic protection of well casings |
|
CEN EN 1515-1 |
Flanges and Their Joints - Bolting - Part 1: Selection of Bolting |
|
CEN EN 1984 |
Industrial Valves - Steel Gate Valves |
|
CEN EN 28662-1 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 1 : General; (ISO 8662-1 : 1988) |
|
CENELEC EN 50086-2-3 |
Conduit Systems for Cable Management - Part 2-3: Particular Requirements for Flexible Conduit Systems-Includes Amendment A11: 1998; Incorporating Corrigendum February 2001 |
|
CENELEC EN 50121-5 |
Railway applications - Electromagnetic compatibility Part 5: Emission and immunity of fixed power supply installations and apparatus |
|
CENELEC EN 50156-1 |
Electrical equipment for furnaces and ancillary equipment Part 1: Requirements for application design and installation |
|
CENELEC EN 50347 |
General Purpose Three-Phase Induction Motors Having Standard Dimensions and Outputs - Frame Numbers 56 to 315 and Flange Numbers 65 to 740-Supersedes HD 231 S1: 1974 |
|
CENELEC EN 60068-3-4 |
Environmental Testing - Part 3-4: Supporting Documentation and Guidance - Damp Heat Tests-IEC 60068-3-4:2001; Supersedes HD 323.2.28 S1:1988 |
|
CENELEC EN 60076-10 |
Power Transformers Part 10: Determination of Sound Levels-IEC 60076-10:2001; Supersedes EN 60551:1992 + A1:1997 |
|
CENELEC EN 60300-1 |
Dependability management Part 1: Dependability management systems-IEC 60300-1:2003; |
|
CENELEC EN 60357 |
Tungsten halogen lamps (non-vehicle) - Performance specifications-IEC 60357: 2002, modified |
|
CENELEC EN 60439-3 |
Low-Voltage Switchgear and Controlgear Assemblies - Part 3: Particular Requirements for Low-Voltage Switchgear and Controlgear Assemblies Intended to be Installed in Places Where Unskilled Persons Have Access for Their Use - Distribution Boards-Includes Amendments A1: 1994 and A2: 2001; IEC 60439-3: 1990, Modified; Incorporates Corrigendum April 1994 and December 2005 |
|
CENELEC EN 60695-1-30 |
Fire hazard testing Part 1-30: Guidance for assessing the fire hazard of electrotechnical products Use of preselection testing procedures-IEC 60695-1-30: 2002 |
|
CENELEC EN 61347-2-13 |
Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules-IEC 61347-2-13:2006 |
|
CENELEC EN 61557-3 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance |
|
CENELEC EN 61557-4 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding |
|
CENELEC EN 61557-7 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence |
|
CENELEC EN 61703 |
Mathematical Expressions for Reliability, Availability, Maintainability and Maintenance Support Terms-IEC 91703: 2001 |
|
CENELEC EN 62281 |
Safety of primary and secondary lithium cells and batteries during transport-IEC 62281:2004 |
|
CEN EN 736-2 |
Valves - Terminology - Part 2: Definition of Components of Valves |
|
CEN EN 760 |
Welding Consumables - Fluxes for Submerged Arc Welding - Classification |
|
CEN EN 764-2 |
Pressure Equipment - Part 2: Quantities, Symbols and Units |
|
CEN EN 855 |
Plastics Hoses and Hose Assemblies - Thermoplastics Textile Reinforced Hydraulic Type - Specification |
|
CEN EN ISO 10297 |
Transportable gas cylinders Cylinder valves Specification and type testing-:1996; ISO 10297:1996 |
|
CEN EN ISO 10437 |
Petroleum, petrochemical and natural gas industries Steam turbines Special-purpose applications-ISO 10437:2003 |
|
CEN EN ISO 11064-2 |
Ergonomic Design of Control Centres - Part 2: Principles for the Arrangement of Control Suites-ISO 11064-2:2000 |
|
CEN EN ISO 11064-3 |
Ergonomic Design of Control Centres - Part 3: Control Room Layout-ISO 11064-3: 1999 |
|
CEN EN ISO 2203 |
Technical Drawings - Conventional Representation of Gears-ISO 2203: 1973 |
|
CEN EN ISO 4527 |
Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods-ISO 4527:2003 |
|
CEN EN ISO 5172 |
Manual Blowpipes for Welding, Cutting and Heating - Specifications and Tests-ISO 5172: 2006; Supersedes EN 874: 1995 |
|
CEN EN ISO 8502-11 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate-ISO 8502-11:2006 |
|
CEN EN ISO 8502-5 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)-ISO 8502-5:1998 |
|
CEN EN ISO 8503-2 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast-Cleaned Steel Substrates - Part 2: Method for the Grading of Surface Profile of Abrasive Blast-Cleaned Steel - Comparator Procedure (ISO 8503-2 : 1988) |
|
CENELEC HD 22.3 S2 |
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 3: Heat Resistant Silicone Rubber Insulated Cables (Reprint Incorporating A1) |
|
CENELEC HD 22.8 S1/ A2 |
AMD 2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 8: Polychloroprene or Equivalent Synthetic Elastomer Sheathed Cables for Use as Decorative Chains |
|
CENELEC HD 345 |
Test of the Insulation of Bars and Coils of High Voltage Machines-Superseded by EN 50209: 1999 |
|
CENELEC CLC/TR 50126-3 |
Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Part 3: Guide to the application of EN 50126-1 for rolling stock RAMS |
|
CEN CLC/TS 60034-20-1 |
Rotating electrical machines Part 20-1: Control motors - Stepping motors |
|
CENELEC CLC/TS 60034-20-1 |
Rotating electrical machines Part 20-1: Control motors - Stepping motors-IEC/TS 60034-20-1:2002 |
|
CEN EN 1011-4 |
Welding - Recommendations for Welding of Metallic Materials - Part 4: Arc Welding of Aluminium and Aluminium Alloys-Includes Amendment A1:2003 |
|
CEN EN 1124-4 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships |
|
CEN EN 12285-1 |
Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
|
CEN EN 12334 |
Industrial valves Cast iron check valves-Includes amendment A1:2004; Incorporating corrigendum July 2002 |
|
CEN EN 12952-1 |
Water-Tube Boilers and Auxiliary Installations - Part 1: General |
|
CEN EN 13160-6 |
Leak detection systems - Part 6: Sensors in monitoring wells |
|
CEN EN 13480-4 |
Metallic Industrial Piping - Part 4: Fabrication and Installation |
|
CEN EN 13509 |
Cathodic protection measurement techniques |
|
CEN EN 14116 |
Tanks for transport of dangerous goods - Digital interface for the product recognition device |
|
CEN EN 14163 |
Petroleum and Natural Gas Industries - Pipeline Transportation Systems - Welding of Pipelines-ISO 13847: 2000 Modified |
|
CEN EN 14420-6 |
Hose fittings with clamp units - Part 6: TW tank truck couplings-Incorporates Amendment 1: 2007 |
|
CEN EN 14610 |
Welding and allied processes - Definitions of metal welding processes |
|
CEN EN 14656 |
Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
|
CEN EN 1550 |
Machine-Tools Safety - Safety Requirements for the Design and Construction of Work Holding Chucks |
|
CEN EN 1643 |
Valve Proving Systems for Automatic Shut-Off Valves for Gas Burners and Gas Appliances |
|
CEN EN 1712 |
Non-destructive testing of welds Ultrasonic testing of welded joints Acceptance levels-Includes Amendments A1:2002 and A2:2004 |
|
CEN EN 1822-3 |
High Efficiency Air Filters (HEPA and ULPA) - Part 3: Testing Flat Sheet Filter Media |
|
CENELEC EN 50086-1 |
Conduit systems for cable management Part 1: General requirements-Incorporating corrigendum February 2001 |
|
CENELEC EN 50146 |
Cable Ties for Electrical Installations |
|
CENELEC EN 50191 |
Erection and Operation of Electrical Test Equipment |
|
CEN EN 579 |
Plastics Piping Systems - Crosslinked Polyethylene (PE-X) Pipes - Determination of Degree of Crosslinking by Solvent Extraction |
|
CENELEC EN 60076-13 |
Power transformers Part 13: Self-protected liquid-filled transformers-IEC 60076-13:2006 |
|
CENELEC EN 60086-3 |
Primary Batteries Part 3: Watch Batteries-IEC 60086-3:2004 |
|
CENELEC EN 60216-6 |
Electrical insulating materials - Thermal endurance properties Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method-IEC 60216-6:2006 |
|
CENELEC EN 60228 |
Incorporates Corrigendum: May 2005 |
|
CENELEC EN 60255-21-2 |
Electrical Relays Part 21: Vibration, Shock, Bump and Seismic Tests on Measuring Relays and Protection Equipment Section 2: Shock and Bump Tests (IEC 255-21-2 : 1988) |
|
CENELEC EN 60269-4 |
Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices |
|
CENELEC EN 60360 |
Standard Method of Measurement of Lamp Cap Temperature Rise-IEC 60360: 1998 |
|
CENELEC EN 60598-2-17 |
Luminaires Part 2: Particular Requirements Section Seventeen - Luminaires for Stage Lighting Television and Film Studios (Outdoor and Indoor) |
|
CENELEC EN 60598-2-24 |
Luminaires Part 2: Particular Requirements Section 24: Luminaires with Limited Surface Temperatures-IEC 60598-2-24: 1997, Modified |
|
CENELEC EN 60695-7-1 |
Fire hazard testing Part 7-1: Toxicity of fire effluent General guidance-IEC 60695-7-1:2004 |
|
CENELEC EN 60896-11 |
Stationary lead-acid batteries Part 11: Vented types - General requirements and methods of tests-IEC 60896-11:2002; Supersedes EN 60896-1:1991 + A2:1992 |
|
CENELEC EN 60896-2 |
Stationary Lead-Acid Batteries General Requirements and Methods of Test Part 2: Valve Regulated Types (IEC 896-2 : 1995)-Superseded by EN 60896-21:2004 |
|
CENELEC EN 60947-5-7 |
Low-voltage switchgear and controlgear Part 5-7: Control circuit devices and switching elements Requirements for proximity devices with analogue output-Supersedes EN 50319:1999; IEC 60947-5-7:2003 |
|
CENELEC EN 60947-5-8 |
Low-voltage switchgear and controlgear Part 5-8: Control circuit devices and switching elements - Three-position enabling switches |
|
CENELEC EN 60974-10 |
Arc welding equipment Part 10: Electromagnetic compatibility (EMC) requirements-IEC 60974-10:2002, Modified; Supersedes EN 50199: 1995; |
|
CENELEC EN 61347-2-10 |
Lamp Controlgear Part 2-10: Particular Requirements for Electronic Invertors and Convertors for High-Frequency Operation of Cold Tubular Discharge Lamps (Neon Tubes)-IEC 61347-2-10:2000 |
|
CENELEC EN 61557-2 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance |
|
CENELEC EN 61557-9 |
Electrical Safety in Low Voltage Distribution Systems up to 1 kV a.c. and 1,5 kV d.c. Equipment for Testing, Measuring or Monitoring of Protective Measures Part 9: Equipment for Insulation Fault Location in IT Systems-IEC 61557-9: 1999 |
|
CENELEC EN 61663-2 |
Lightning Protection - Telecommunication Lines Part 2: Lines Using Metallic Conductors-IEC 61663-2: 2001 |
|
CENELEC EN 62023 |
Structuring of Technical Information and Documentation-IEC 62023:2000 |
|
CEN EN 62259 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes Nickel-cadmium prismatic secondary single cells with partial gas recombination-(IEC 62259:2003) |
|
CENELEC EN 62310-1 |
Static transfer systems (STS) Part 1: General and safety requirements-IEC 62310-1:2005 |
|
CEN EN 739 |
Low-pressure hose assemblies for use with medical gases-Includes Amendment A1: 2002 |
|
CEN EN ISO 10156-2 |
Gas cylinders Gases and gas mixtures Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures-ISO 10156-2:2005 |
|
CEN EN ISO 1207 |
Slotted Cheese Head Screws - Product Grade A (ISO 1207:1992) |
|
CEN EN ISO 13710 |
Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps-ISO 13710:2004 |
|
CEN EN ISO 13919-1 |
Welding - Electrons and Laser Beam Welded Joints - Guidance on Quality Levels for Imperfections - Part 1: Steel-ISO 13919-1: 1996 |
|
CEN EN ISO 14555 |
Welding - Arc Stud Welding of Metallic Materials-ISO 14555:2006 |
|
CEN EN ISO 1481 |
Slotted Pan Head Tapping Screws (ISO 1481: 1983) |
|
CEN EN ISO 15187 |
Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (GUI-R)-ISO 15187:2000 |
|
CEN EN ISO 2009 |
Slotted Countersunk Flat Head Screws (Common Head Style) - Product Grade A (ISO 2009:1994) |
|
CEN EN ISO 21670 |
Hexagon weld nuts with flange-ISO 21670: 2003 |
|
CEN EN ISO 228-2 |
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges-ISO 228-2: 1987 |
|
CEN EN ISO 5136 |
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method-ISO 5136:2003; Supersedes EN 25136:1993 |
|
CEN EN ISO 8178-2 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 2: Measurement of Gaseous and Particulate Exhaust Emissions at Site-ISO 8178-2: 1996 |
|
CEN EN ISO 8504-3 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Preparation Methods - Part 3: Hand - and Power-Tool Cleaning-IS0 8504-3: 1993 |
|
CEN EN ISO 9606-3 |
Approval Testing of Welders - Fusion Welding - Part 3: Copper and Copper Alloys-ISO 9606-3:1999 |
|
CENELEC HD 21.7 S1 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750V Part 7: Single Core Non-Sheathed Cables for Internal Wiring for a Conductor Temperature of 90 Degrees Celsius |
|
CEN CEN ISO/TR 17844 |
Welding - Comparison of standardised methods for the avoidance of cold cracks |
|
CEN CEN/TS 14825 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Testing and rating at part load conditions |
|
CEN EN 1011-5 |
Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel |
|
CEN EN 10216-3 |
Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 3: Alloy Fine Grain Steel Tubes-Includes Amendment A1:2004 |
|
CEN EN 10224 |
Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption Technical delivery conditions-Includes amendment A1:2005 |
|
CEN EN 10290 |
Steel Tubes and Fittings for Onshore and Offshore Pipelines External Liquid Applied Polyurethane and Polyurethane-Modified Coatings |
|
CEN EN 1123-3 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building |
|
CEN EN 1171 |
Industrial valves Cast iron gate valves |
|
CEN EN 12162 |
Liquid Pumps - Safety Requirements - Procedure for Hydrostatic Testing |
|
CEN EN 12476 |
Phosphate Conversion Coatings of Metals - Method of Specifying Requirements |
|
CEN EN 12478 |
Safety of Machine Tools - Large Numerically Controlled Turning Machines and Turning Centres-Incorporating Corrigendum May 2001 |
|
CEN EN 12487 |
Corrosion Protection of Metals - Rinsed and Non-Rinsed Chromate Conversion Coatings on Aluminium and Aluminium Alloys |
|
CEN EN 13121-4 |
GRP tanks and vessels for use above ground - Part 4: Delivery, installation and maintenance |
|
CEN EN 13160-4 |
Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces |
|
CEN EN 13160-7 |
Leak detection systems Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets |
|
CEN EN 13322-1 |
Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel-Includes amendment A1:2006 |
|
CEN EN 13709 |
Industrial valves - Steel globe and globe stop and check valves |
|
CEN EN 13906-1 |
Cylindrical Helical Springs Made from Round Wire and Bar - Calculation and Design - Part 1: Compression Springs |
|
CEN EN 14399-3 |
High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies |
|
CEN EN 14620-3 |
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and p165°C Part 3: Concrete components |
|
CEN EN 1854 |
Pressure Sensing Devices for Gas Burners and Gas Burning Appliances |
|
CENELEC EN 50005 |
Low Voltage Switchgear and Controlgear for Industrial Use: Terminal Marking and Distinctive Number: General Rules |
|
CENELEC EN 50121-1 |
Railway applications - Electromagnetic compatibility Part 1: General |
|
CENELEC EN 50144-2-1 |
Safety of Hand-Held Electric Motor Operated Tools Part 2-1: Particular Requirements for Drills-Ratified European Text |
|
CENELEC EN 50264-2 |
Railway applications Railway rolling stock cables having special fire performance Standard wall Part 2: Single core cables |
|
CEN EN 558-1 |
Industrial Valves - Face-to-Face and Centre- to-Face Dimensions of Metal Valves for Use in Flanged Pipe Systems Part 1. PN-Designated Valves |
|
CENELEC EN 60044-2 |
Instrument Transformers - Part 2: Inductive Voltage Transformers-Includes Amendments A1:2000 and A2:2003; Supersedes HD 554 S1:1992; IEC 60044-2:1997 + A1:2000 + A2:2002, Modified |
|
CENELEC EN 60064 |
Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes - Performance Requirements-Includes Amendment A2: January 2003 and Amendment A3: May 2006; IEC 60064:1993 + A2:2002, modified |
|
CENELEC EN 60076-1/PRAA |
AMD prAA Power Transformers Part 1: General |
|
CENELEC EN 60076-11 |
Power transformers Part 11: Dry-type transformers-IEC 60076-11:2004; Supersedes EN 60726:2003 |
|
CENELEC EN 60077-1 |
Railway applications - Electric equipment for rolling stock Part 1: General service conditions and general rules-IEC 60077-1:1999, modified |
|
CENELEC EN 60095-4 |
Lead-Acid Starter Batteries Part 4: Dimensions of Batteries for Heavy Commercial Vehicles-IEC 95-4 : 1989, Modified |
|
CENELEC EN 60127-5 |
Miniature Fuses Part 5: Guidelines for Quality Assessment of Miniature Fuse-Links |
|
CENELEC EN 60216-5 |
Electrical insulating materials Thermal endurance properties Part 5: Determination of relative thermal endurance index (RTE) of an insulating material-Supersedes HD 611.5 S1:1992; IEC 60216-5:2003 |
|
CENELEC EN 60320-2-3 |
Appliance Coupler for Household and Similar General Purposes Part 2-3: Appliance Coupler with a Degree of Protection Higher Than IPX0-Includes amendment A1:2005 |
|
CENELEC EN 60320-2-4 |
Appliance couplers for household and similar general purposes Part 2-4: Couplers dependent on appliance weight for engagement-IEC 60320-2-4:2005 |
|
CENELEC EN 60352-1 |
Solderless Connections Part 1: Wrapped Connections - General Requirements, Test Methods and Practical Guidance-IEC 60352-1: 1997 |
|
CENELEC EN 60669-2-1 |
Switches for household and similar fixed electrical installations Part 2-1: Particular requirements Electronic switches-IEC 60669-2-1:2002, modified |
|
CENELEC EN 60695-11-20 |
Fire Hazard Testing - Part 11-20: Test Flames - 500 W Flame Test Methods-Includes amendment A1:2003; IEC 60695-11-20:1999 + A1:2003; Partly Supersedes HD 441 S1:1983 |
|
CENELEC EN 60695-2-4/0 |
Fire Hazard Testing Part 2: Test Methods Section 4/Sheet 0: Diffusion Type and Premixed Type Flame Test Methods (IEC 695-2-4/0 : 1991) |
|
CENELEC EN 60715 |
Dimensions of Low-Voltage Switchgear and Controlgear - Standardized Mounting on Rails for Mechanical Support of Electrical Devices in Switchgear and Controlgear Installations-IEC 60715:1981 + A1:1995 |
|
CENELEC EN 60730-2-3 |
Automatic Electrical Controls for Household and Similar Use - Part 2-3: Particular Requirements for Thermal Protectors for Ballasts for Tubular Fluorescent Lamps-Incorporates Amendment A1:1998; Amendment A2:2001; Amendment A11: 2005; Incorporating Corrigendum March 2001 |
|
CENELEC EN 60896-1/ A2 |
AMD 2 Stationary Lead-Acid Batteries - General Requirements and Methods of Test Part 1: Vented Types |
|
CENELEC EN 60904-1 |
Photovoltaic devices Part 1: Measurement of photovoltaic current-voltage characteristics-IEC 904-1: 2006 |
|
CENELEC EN 60947-5-4 |
Low-voltage switchgear and controlgear Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests-IEC 60947-5-4:2002 |
|
CENELEC EN 61131-5 |
Programmable Controllers Part 5: Communications-IEC 61131-5: 2000 |
|
CENELEC EN 61241-14 |
Electrical apparatus for use in the presence of combustible dust Part 14: Selection and installation-IEC 61241-14:2004; Partly supersedes EN 50281-1-2:1998 + A1:2002 |
|
CENELEC EN 61241-17 |
Electrical apparatus for use in the presence of combustible dust Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)-Partially supersedes EN 50281-1-2:1998; IEC 61241-17:2005 |
|
CENELEC EN 61243-1 |
Live working Voltage detectors Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.-IEC 61243-1: 2003 |
|
CENELEC EN 61496-3 |
Safety of Machinery - Electro-Sensitive Protective Equipment Part 3: Particular Requirements for Active Opto-Electronic Protective Devices Responsive to Diffuse Reflection (AOPDDR)-IEC 61496-3:2001; |
|
CENELEC EN 61557-10 |
Electrical Safety in Low Voltage Distribution Systems Up to 1 000 V A.C. and 1 500 V D.C. - Equipment for Testing, Measuring or Monitoring of Protective Measures Part 10: Combined Measuring Equipment for Testing, Measuring or Monitoring of Protective Measures-IEC 61557-10:2000 |
|
CENELEC EN 61558-2-20 |
Safety of Power Transformers, Power Supply Units and Similar Devices - Part 2-20: Particular Requirements for Small Reactors-IEC 61558-2-20: 2000 |
|
CENELEC EN 61810-2 |
Electromechanical elementary relays Part 2: Reliability-IEC 61810-2: 2005; Supersedes EN 60255-23: 1996 |
|
CEN EN 746-1 |
Industrial Thermoprocessing Equipment - Part 1: Common Safety Requirements for Industrial Thermoprocessing Equipment |
|
CEN EN 792-6 |
Hand-Held Non-Electric Power Tools - Safety Requirements - Part 6: Assembly Power Tools for Threaded Fasteners |
|
CEN EN 910 |
Destructive Tests on Welds in Metallic Materials - Bend Tests |
|
CEN EN ISO 11064-1 |
Ergonomic Design of Control Centres - Part 1: Principles for the Design of Control Centres-ISO 11064-1:2000 |
|
CEN EN ISO 11064-4 |
Ergonomic design of control centres - Part 4: Layout and dimensions of workstations-ISO 11064-4:2004 |
|
CEN EN ISO 14539 |
Manipulating Industrial Robots - Object Handling with Grasp-Type Grippers - Vocabulary and Presentation of Characteristics-ISO 14539:2000 |
|
CEN EN ISO 1463 |
Metallic and oxide coatings - Measurement of coating thickness - Microscopical method-ISO 1463:2003 |
|
CEN EN ISO 14731 |
Welding coordination Tasks and responsibilities-:1994 |
|
CEN EN ISO 1479 |
Hexagon Head Tapping Screws (ISO 1479:1983) |
|
CEN EN ISO 16330 |
Reciprocating positive displacement pumps and pump units Technical requirements-ISO 16330:2003 |
|
CEN EN ISO 17659 |
Welding Multilingual terms for welded joints with illustrations-; ISO 17659:2002 |
|
CEN EN ISO 21049 |
Pumps - Shaft sealing systems for centrifugal and rotary pumps-Incorporating corrigendum February 2005; ISO 21049:2004 |
|
CEN EN ISO 6988 |
Metallic and Other Non Organic Coatings - Sulfur Dioxide Test with General Condensation of Moisture (ISO 6988 : 1985) |
|
CEN EN ISO 8502-4 |
Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 4: Guidance on the Estimation of the Probability of Condensation Prior to Paint Application-ISO 8502-4:1993 |
|
CEN EN ISO 8676 |
Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and B-Supersedes EN 28676:1991; ISO 8676:1999 |
|
CEN EN ISO 887 |
Plain washers for metric bolts, screws and nuts for general purposes - General plan-Incorporating corrigendum January 2006 |
|
CEN EN ISO 9606-5 |
Approval Testing of Welders - Fusion Welding - Part 5: Titanium and Titanium Alloys, Zirconium and Zirconium Alloys-ISO 9606-5: 2000 |
|
CEN ENV 305 |
Heat Exchangers - Definitions of Performance of Heat Exchangers and the General Test Procedure for Establishing Performance of All Heat Exchangers |
|
CENELEC HD 22.4 S3/A1 |
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 4: Cords and Flexible Cables |
|
CENELEC HD 27 |
Colours of the Cores of Flexible Cables and Cords |
|
CENELEC HD 308 |
Identification and Use of Cores of Flexible Cables |
|
CEN CEN ISO/TR 20172 |
Welding - Grouping systems for materials - European materials-ISO/TR 20172:2006 |
|
CEN CEN ISO/TR 20173 |
Welding Grouping systems for materials American materials-ISO/TR 20173: 2005 |
|
CEN CEN/TS 1071-10 |
Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning |
|
CENELEC CLC/TR 50373 |
Wind turbines Electromagnetic compatibility |
|
CENELEC CLC/TR 50489 |
Smart tracker chips - Feasibility study on the inclusion of RFID in Electrical and Electronic Equipment for WEEE management |
|
CEN EN 1011-7 |
Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding |
|
CEN EN 10226-3 |
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges |
|
CEN EN 10288 |
Steel Tubes and Fittings for Onshore and Offshore Pipelines - External Two Layer Extruded Polyethlene Based Coatings |
|
CEN EN 10342 |
Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations |
|
CEN EN 1074-1 |
Valves for Water Supply - Fitness for Purpose Requirements and Appropriate Verification Tests - Part 1: General Requirements |
|
CEN EN 1089-3 |
Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
|
CEN EN 1092-2 |
Flanges and Their Joints - Circular Flanges for Pipes, Valves, Fittings and Accessories, PN Designated - Part 2: Cast Iron Flanges |
|
CEN EN 12115 |
Rubber and Thermoplastics Hoses and Hose Assemblies for Liquid or Gaseous Chemicals - Specification |
|
CEN EN 12415 |
Safety of machine tools - Small numerically controlled turning machines and turning centres-Includes amendment A1:2002 |
|
CEN EN 12536 |
Welding Consumables - Rods for Gas Welding of Non Alloy and Creep-Resisting Steels - Classification |
|
CEN EN 12567 |
Industrial Valves - Isolating Valves for LNG - Specification for Suitability and Appropriate Verification Tests |
|
CEN EN 1267 |
Valves - Test of Flow Resistance Using Water as Test Fluid |
|
CEN EN 12732 |
Gas Supply Systems - Welding Steel Pipework - Functional Requirements |
|
CEN EN 12753 |
Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
|
CEN EN 12797 |
Brazing - Destructive Tests of Brazed Joints-Includes Amendment A1:2003 |
|
CEN EN 1291 |
Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels-Includes Amendments A1:2002 and A2:2003 |
|
CEN EN 12952-10 |
Water-tube boilers and auxiliary installations Part 10: Requirements for safeguards against excessive pressure |
|
CEN EN 12952-3 |
Water-Tube Boilers and Auxiliary Installations - Part 3: Design and Calculation for Pressure Parts |
|
CEN EN 12952-4 |
Water-Tube Boilers and Auxiliary Installations - Part 4: In-Service Boiler Life Expectancy Calculations |
|
CEN EN 12982 |
Industrial Valves - End-to-End and Centre-to-End Dimensions for Butt Welding End Valves |
|
CEN EN 13067 |
Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies |
|
CEN EN 13128 |
Safety of Machine Tools - Milling Machines (Including Boring Machines)-Incorporating Amendment 1: 3/2006 |
|
CEN EN 13411-5 |
Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
|
CEN EN 13458-2 |
Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing |
|
CEN EN 13523-8 |
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
|
CEN EN 13622 |
Gas Welding Equipment - Terminology - Terms Used for Gas Welding Equipment |
|
CEN EN 13636 |
Cathodic protection of buried metallic tanks and related piping |
|
CEN EN 13942 |
Petroleum and natural gas industries Pipeline transportation Pipeline valves |
|
CEN EN 1395-2 |
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVOF |
|
CEN EN 14219 |
Hexagon bolts with flange with metric fine pitch thread - Small series-Incorporating corrigendum February 2007 |
|
CEN EN 14222 |
Stainless steel shell boilers |
|
CEN EN 14420-3 |
Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
|
CEN EN 14420-7 |
Hose fittings with clamp units - Part 7: Cam locking couplings-Incorporates Amendment 1: 2007 |
|
CEN EN 1452-1 |
Plastics Piping Systems for Water Supply - Unplasticized Poly (Vinyl Chloride) (PVC-U) - Part 1: General |
|
CEN EN 14620-4 |
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and p165°C Part 4: Insulation components |
|
CEN EN 14876 |
Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums |
|
CEN EN 1515-2 |
Flanges and Their Joints - Bolting - Part 2: Classification of Bolt Materials for Steel Flanges, PN Designated |
|
CEN EN 15208 |
Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications |
|
CEN EN 1555-4 |
Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 4: Valves |
|
CEN EN 1597-1 |
Welding Consumables - Test Methods - Part 1: Test Piece for All-Weld Metal Test Specimens in Steel, Nickel and Nickel Alloys |
|
CEN EN 1708-2 |
Welding - Basic Weld Joint Details in Steel - Part 2: Non-Internal Pressurized Components |
|
CEN EN 1736 |
Refrigerating Systems and Heat Pumps - Flexible Pipe Elements, Vibration Isolators and Expansion Joints - Requirements, Design and Installation |
|
CEN EN 24015 |
Hexagon Head Bolts - Product Grade B - Reduced Shank (Shank Diameter = Pitch Diameter) |
|
CEN EN 26554 |
Flanged Automatic Steam Traps - Face-to-Face Dimensions |
|
CEN EN 267 |
Forced Draught Oil Burners - Definitions, Requirements, Testing, Marking |
|
CEN EN 27436 |
Slotted Set Screws with Cup Point |
|
CEN EN 306 |
Heat Exchangers - Methods of Measuring the Parameters Necessary for Establishing the Performance-Supersedes ENV 306: 1990 |
|
CEN EN 378-3 |
Refrigerating Systems and Heat Pumps - Safety and Environmental Requirements - Part 3: Installation Site and Personal Protection-Includes Amendment A1:2003 |
|
CENELEC EN 50011 |
Low Voltage Switchgear and Controlgear for Industrial Use Terminal Marking, Distinctive Number and Distinctive Letter for Particular Contactor Relays |
|
CENELEC EN 50012 |
Low Voltage Switchgear and Controlgear for Industrial Use Terminal Marking and Distinctive Number for Auxiliary Contacts of Particular Contactors |
|
CENELEC EN 50066 |
Mini-Couplers for the Interconnection of Electrical Mains Supplied Equipment in Road Vehicles |
|
CEN EN 50107-2 |
Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV Part 2: Requirements for earth-leakage and open-circuit protective devices |
|
CENELEC EN 50121-3-1 |
Railway Applications - Electromagnetic Compatibility - Part 3-1: Rolling Stock - Train and Complete Vehicle |
|
CENELEC EN 50144-2-13 |
Safety of hand-held electric motor operated tools Part 2-13: Particular requirements for chain saws-Supersedes HD 400.3L S2:1998 |
|
CENELEC EN 50238 |
Railway applications - Compatibility between rolling stock and train detection systems |
|
CENELEC EN 50342-1 |
Lead-acid starter batteries Part 1: General requirements and methods of test |
|
CENELEC EN 50370-2 |
Electromagnetic compatibility (EMC) - Product family standard for machine tools Part 2: Immunity |
|
CENELEC EN 50428 |
Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)-Incorporates Amendment A1: October 2007 |
|
CEN EN 559 |
Gas welding equipment - Rubber hoses for welding, cutting and allied processes |
|
CENELEC EN 60068-3-6 |
Environmental Testing - Part 3-6: Supporting Documentation and Guidance - Confirmation of the Performance of Temperature/Humidity Chambers-IEC 60068-3-6: 2001 |
|
CENELEC EN 60214-1 |
Tap-changers Part 1: Performance requirements and test methods-IEC 60214-1: 2003 |
|
CENELEC EN 60243-2 |
Electric Strength of Insulating Materials - Test Methods Part 2: Additional Requirements for Tests Using Direct Voltage-Supersedes HD 559.2 S1:1991; IEC 60243-2:2001 |
|
CENELEC EN 60255-22-4 |
Electrical Relays Part 22-4: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Electrical Fast Transient/Burst Immunity Test-IEC 60255-22-4: 2002 |
|
CENELEC EN 60269-2 |
Low-Voltage Fuses - Part 2: Supplementary Requirements for Fuses for Use by Authorized Persons (Fuses Mainly for Industrial Application)-Includes Amendment A1:1998 and A2:2002; IEC 60269-2:1986 + A1:1995 + A2:2001 |
|
CENELEC EN 60432-1 |
Incandescent Lamps - Safety Specifications Part 1: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes-IEC 60432-1: 1999 + A1:2005, Modified; A1: May 2005 |
|
CENELEC EN 60454-2 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test |
|
CENELEC EN 60454-3-2 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Polyester Film Tapes with Rubber Thermosetting or Acrylic Crosslinked Adhesives-IEC 60454-3-2:1998 |
|
CENELEC EN 60670-1 |
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General requirements-IEC 60670-1:2002 + corrigendum 2003, modified |
|
CENELEC EN 60695-5-1 |
Fire hazard testing Part 5-1: Corrosion damage effects of fire effluent - General guidance-IEC 60695-5-1:2002 |
|
CEN EN 60706-2 |
Maintainability of equipment Part 2: Maintainability requirements and studies during the design and development phase-IEC 60706-2:2006 |
|
CEN EN 60706-3 |
Maintainability of equipment Part 3: Verification and collection, analysis and presentation of data-IEC 60706-3:2006 |
|
CENELEC EN 60745-2-11 |
Hand-held motor-operated electric tools - Safety Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)-Incorporates Amendment A11: May 2007 |
|
CENELEC EN 60745-2-12 |
Hand-held motor-operated electric tools Safety Part 2-12: Particular requirements for concrete vibrators-IEC 60745-2-12:2003; |
|
CENELEC EN 60811-3-2 |
Insulating and sheathing materials of electric cables Common test methods Part 3: Methods specific to PVC compounds Section 2: Loss of mass test Thermal stability test-IEC 60811-3-2:1985 + corrigendum May 1986 + A1:1993 + A2:2003; Supersedes HD 505.3.2S1:1998 |
|
CENELEC EN 60904-5 |
Photovoltaic Devices Part 5: Determination of the Equivalent Cell Temperature (ECT) of Photovoltaic (PV) Devices by the Open-Circuit Voltage Method-IEC 904-5: 1993 |
|
CENELEC EN 60947-7-3 |
Low-voltage switchgear and controlgear Part 7-3: Ancillary equipment Safety requirements for fuse terminal blocks-IEC 60947-7-3:2002 |
|
CENELEC EN 60947-8 |
Low-voltage switchgear and controlgear Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines-IEC 60947-8:2003 |
|
CEN EN 60947-8 |
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines-Amendment 1:November 2006 |
|
CENELEC EN 61008-2-1 |
Residual Current Operated Circuit-Breakers without Integral Overcurrent Protection for Household and Similar Uses (RCCB´s) Part 2-1: Applicability of the General Rules to RCCB´s Functionally Independent of Line Voltage-Includes Amendment A11: 1998; IEC 1008-2-1: 1990, Mod |
|
CENELEC EN 61044 |
Opportunity-Charging of Lead-Acid Traction Batteries (IEC 1044 : 1990) |