|
CEN EN 13771-2 |
Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units |
|
CEN EN 13785 |
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures |
|
CEN EN 13788 |
Machine Tools - Safety - Multi-Spingle Automatic Turning Machines |
|
CEN EN 13898 |
Machine tools - Safety - Sawing machines for cold metal |
|
CEN EN 1394 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Apparent Initial Circumferential Tensile Strength-Incorporating Corrigendum November 1997 |
|
CEN EN 13951 |
Liquid pumps - Safety requirements - Agrifoodstuffs equipment ; Design rules to ensure hygiene in use |
|
CEN EN 1395-4 |
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying |
|
CEN EN 14295 |
Welding consumables - Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification |
|
CEN EN 14398-3 |
Cryogenic vessels Large transportable non-vacuum insulated vessels Part 3: Operational requirements-Includes Amendment A1:2005 |
|
CEN EN 14399-7 |
High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies |
|
CEN EN 14408-3 |
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes |
|
CEN EN 1442 |
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
|
CEN EN 14422 |
Clamp type coupling assemblies for LPG transfer hoses |
|
CEN EN 14430 |
Vitreous and porcelain enamels - High voltage test |
|
CEN EN 14452 |
Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B |
|
CEN EN 14454 |
Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A |
|
CEN EN 14462 |
Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 |
|
CEN EN 14483-2 |
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours |
|
CEN EN 14532-2 |
Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
|
CEN EN 14540 |
Fire-fighting hoses - Non-percolating layflat hoses for fixed systems-Incorporating Amendment A1: 04/2007 |
|
CEN EN 14570 |
Equipping of LPG tanks, overground and underground-Includes Amendment A1:2006 |
|
CEN EN 14571 |
Metallic coatings on nonmetallic basis materials - Measurement of coating thickness - Microresistivity method |
|
CEN EN 14585-1 |
Corrugated metal hose assemblies for pressure applications - Part 1: Requirements |
|
CEN EN 14587-1 |
Railway applications - Track - Flash butt welding of rails - Part 1: New R220, R260, R260Mn and R350HT grade rails in a fixed plant |
|
CEN EN 14638-1 |
Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods |
|
CEN EN 14700 |
Welding consumables - Welding consumables for hard-facing |
|
CEN EN 14717 |
Welding and allied processes - Environmental check list |
|
CEN EN 14728 |
Imperfections in thermoplastic welds - Classification |
|
CEN EN 14772 |
Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
|
CEN EN 1503-4 |
Valves - Materials for Bodies, Bonnets and Covers - Part 4: Copper Alloys Specified in European Standards |
|
CEN EN 15085-1 |
Railway applications - Welding of railway vehicles and components - Part 1: General |
|
CEN EN 15146 |
Solid softwood panelling and cladding - Machined profiles without tongue and groove |
|
CEN EN 15159-1 |
Vitreous and porcelain enamels - Glass lined apparatus process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories |
|
CEN EN 15339-2 |
Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
|
CEN EN 1597-2 |
Welding Consumables - Test Methods - Part 2: Preparation of Test Piece for Single-Run and Two-Run Technique Test Specimens in Steel |
|
CEN EN 1765 |
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
|
CEN EN 1803 |
Transportable Gas Cylinders - Periodic Inspection and Testing of Welded Carbon Steel Gas Cylinders |
|
CEN EN 1904 |
Precious Metals - The Finenesses of Solders Used with Precious Metal Jewellery Alloys |
|
CEN EN 1964-1 |
Transportable Gas Cylinders - Specification for the Design and Construction of Refillable Transportable Seamless Steel Gas Cylinders of Water Capacities from 0,5 Litre up to and Including 150 Litres - Part 1: Cylinders Made of Seamless Steel with an Rm Value of Less than 1100 MPa |
|
CEN EN 1989 |
Thermoplastics Piping Systems - Joints for Buried Non-Pressure Sewerage Applications - Test Method for Long-Term Sealing Performance of Joints with Thermoplastic Elastomer (TPE) Seals by Estimating the Sealing Pressure |
|
CEN EN 225-2 |
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 2: Oil burner motors |
|
CEN EN 24766 |
Slotted Set Screws with Flat Point |
|
CEN EN 25184 |
Straight Resistance Spot Welding Electrodes (ISO 5184 : 1979) |
|
CEN EN 2574 |
Welds Information on Drawings |
|
CEN EN 25821 |
Resistance Spot Welding Electrode Caps |
|
CEN EN 25822 |
Spot Welding Equipment - Taper Plug Gauges and Taper Ring Gauges |
|
CEN EN 25827 |
Spot Welding - Electrode Back-Ups and Clamps |
|
CEN EN 26553 |
Automatic Steam Traps - Marking |
|
CEN EN 27841 |
Automatic Steam Traps - Determination of Steam Loss - Test Methods |
|
CEN EN 28029 |
Plastics Hose - General Purpose Collapsible Water Hose, Textile Reinforced - Specification (ISO 8029 : 1985) |
|
CEN EN 28430-1 |
Resistance Spot Welding - Electrode Holders - Part 1 : Taper Fixing 1:10 |
|
CEN EN 28662-5 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 5: Pavement Breakers and Pick Hammers-Includes Amendments A1: 1995 and A2: 2001; ISO 8662-5: 1992 + A1: 1999 |
|
CEN EN 28738 |
Plain Washers for Clevis Pins - Product Grade A |
|
CEN EN 29090 |
Gas Tightness of Equipment for Gas Welding and Allied Processes |
|
CEN EN 29455-8 |
Soft Soldering Fluxes - Test Methods - Part 8: Determination of Zinc Content (ISO 9455-8 : 1991) |
|
CEN EN 295-10 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 10: Performance requirements |
|
CEN EN 299 |
Oil Pressure Atomizing Nozzles - Determination of the Angle and Spray Characteristics-Ratified European Text; Supersedes ENV 299:1992 |
|
CEN EN 31427 |
Determination of Silver in Silver Jewellery Alloys - Volumetric (Potentiometric) Method Using Potassium Bromide (ISO 11427 : 1993) |
|
CEN EN 45510-2-5 |
Guide for Procurement of Power Station Equipment Part 2-5: Electrical Equipment Motors |
|
CEN EN 45510-2-7 |
Guide for Procurement of Power Station Equipment Part 2-7: Electrical Equipment Switchgear and Controlgear |
|
CENELEC EN 45510-2-8 |
Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables |
|
CENELEC EN 45510-4-4 |
Guide for the Procurement of Power Station Equipment - Part 4-4: Boiler Auxiliaries - Fuel Preparation Equipment |
|
CENELEC EN 45510-4-5 |
Guide for the Procurement of Power Station Equipment - Part 4-5: Boiler Auxiliaries - Coal Handling and Bulk Storage Plant |
|
CEN EN 45510-6-3 |
Guide for Procurement of Power Station Equipment - Part 6-3: Turbine Auxiliaries - Condenser Plant |
|
CEN EN 45510-6-7 |
Guide for Procurement of Power Station Equipment - Part 6-7: Turbine Auxiliaries - Moisture Separator Reheaters |
|
CENELEC EN 50025 |
Low Voltage Switchgear and Controlgear for Industrial Use. Inductive Proximity Switches. Form C, for Direct Current, 3 or 4 Terminals |
|
CENELEC EN 50035 |
Low Voltage Switchgear and Controlgear for Industrial Use: Mounting Rails; G-Profile for the Fixing of Terminal Blocks |
|
CENELEC EN 50045 |
Low Voltage Switchgear and Controlgear for Industrial Use: Mounting Rails: Top Hat Rails, 15 mm Wide for the Fixing of Terminal Blocks |
|
CENELEC EN 50086-2-1 |
Conduit systems for cable management Part 2-1: Particular requirements for rigid conduit systems-Includes amendment A11:1998; Incorporating corrigendum February 2001 |
|
CENELEC EN 50109-2-1 |
Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio Frequency Applications Part 2-1: Particular Requirements for Radio Frequency Connectors and Concentric Contacts - Open Throat Tools with Fixed Dies, Sizes A to E, V and W |
|
CENELEC EN 50109-2-5 |
Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio Frequency Applications Part 2-5: Particular Requirements for the Termination of Twin-Ax Cable for Databus Applications |
|
CENELEC EN 50119 |
Railway Applications - Fixed Installations - Electric Traction Overhead Contact Lines |
|
CENELEC EN 50123-7-1 |
Railway applications Fixed installations D.C. switchgear Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems Application guide-Supersedes ENV 50123-7-1:1999 |
|
CENELEC EN 50171 |
Central Power Supply Systems-Incorporating Corrigendum August 2001 |
|
CENELEC EN 50216-8 |
Power transformer and reactor fittings Part 8: Butterfly valves for insulating liquid circuits-Incorporating Amendment 1: 2006 |
|
CENELEC EN 50227 |
Control Circuit Devices and Switching Elements Proximity Sensors, d.c. Interface for Proximity Sensors and Switching Amplifiers (NAMUR)-Ratified European Text |
|
CENELEC EN 50266-2-5 |
Common Test Methods for Cables under Fire Conditions - Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables Part 2-5: Procedures - Small Cables - Category D-Incorporating Corrigendum March 2002 |
|
CENELEC EN 50285 |
Energy Efficiency of Electric Lamps for Household Use - Measurement Methods |
|
CENELEC EN 50290-2-22 |
Communication Cables - Part 2-22: Common Design Rules and Construction - PVC Sheathing Compounds-Incorporates Amendment A1: June 2007 |
|
CENELEC EN 50290-2-26 |
Communication cables Part 2-26: Common design rules and construction - Halogen free flame retardant insulation compounds-Incorporating Amendment A1: 6/2007 |
|
CENELEC EN 50328 |
Railway applications Fixed installations Electronic power convertors for substations-Partly Superedes EN 60146-1-1:1993 |
|
CENELEC EN 50341 PARTS 1-3 |
Overhead electrical lines exceeding AC 45 kV Part 1: General requirements Common specifications; Part 2: Index of National Normative Aspects; Part 3: Set of National Normative Aspects |
|
CENELEC EN 50341-2 |
Overhead electrical lines exceeding AC 45 kV Part 2: Index of National Normative Aspects-Incorporating corrigendum October 2006 |
|
CENELEC EN 50363-10-1 |
Insulating, sheathing and covering materials for low voltage energy cables Part 10-1: Miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC) |
|
CEN EN 50363-5 |
Insulating, sheathing and covering materials for low voltage energy cables Part 5: Halogen-free, cross-linked insulating compounds |
|
CENELEC EN 50363-9-1 |
Insulating, sheathing and covering materials for low voltage energy cables Part 9-1: Miscellaneous insulating compounds - Cross-linked polyvinyl chloride (XLPVC) |
|
CENELEC EN 50367 |
Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access) |
|
CENELEC EN 50386 |
Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers-Supersedes HD 596 S1:1996 |
|
CENELEC EN 50387 |
Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers-Supersedes HD 607 S1:1996 |
|
CEN EN 50393 |
Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV-:2000 |
|
CENELEC EN 50464-4 |
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 4: Requirements and tests concerning pressurised corrugated tanks |
|
CEN EN 562 |
Gas Welding Equipment - Pressure Gauges Used in Welding, Cutting and Allied Processes |
|
CEN EN 588-1 |
Fibre-Cement Pipes for Sewers and Drains - Part 1: Pipes, Joints and Fittings for Gravity Systems |
|
CENELEC EN 60034-2-1 |
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
|
CENELEC EN 60034-28 |
Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors |
|
CENELEC EN 60079-19 |
Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
|
CENELEC EN 60255-22-1 |
Electrical relays Part 22-1: Electrical disturbance tests for measuring relays and protection equipment - 1 MHz burst immunity tests (IEC 60255-22-1:2005)-IEC 60255-22-1:2005 |
|
CENELEC EN 60255-22-6 |
Electrical Relays - Part 22-6: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Immunity to Conducted Disturbances Induced by Radio Frequency Fields-IEC 60255-22-6:2001 |
|
CENELEC EN 60255-24 |
Electrical Relays Part 24: Common Format for Transient Data Exchange (COMTRADE) for Power Systems-IEC 60255-24: 2001 |
|
CENELEC EN 60255-8 |
Electrical Relays Part 8: Thermal Electrical Relays-IEC 60255-8:1990, Modified |
|
CENELEC EN 60296 |
Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear-IEC 60296:2003; Incorporates Corrigendum September 2004 |
|
CENELEC EN 60317-0-1 |
Specifications for Particular Types of Winding Wires - Part 0-1: General Requirements - Enamelled Round Copper Wire-Includes amendments A1:2000 and A2:2005; IEC 60317-0-1:1997 + A1:1999 |
|
CENELEC EN 60317-0-2 |
Particular Types of Winding Wires - Part 0-2: General Requirements - Enamelled Rectangular Copper Wire-Including amendments A1:2000 and A2:2005; IEC 60317-0-2:1997 + A1:1999 + A2:2005 |
|
CENELEC EN 60332-2-1 |
Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable Apparatus-Partially Supersedes EN 50265-1:1998 |
|
CENELEC EN 60343 |
Recommended Test Methods for Determining the Relative Resistance of Insulating Materials to Breakdown by Surface Discharges (IEC 343: 1991) |
|
CENELEC EN 60401-1 |
Terms and nomenclature for cores made of magnetically soft ferrites Part 1: Terms used for physical irregularities-IEC 60401-1: 2002 |
|
CENELEC EN 60401-2 |
Terms and nomenclature for cores made of magnetically soft ferrites Part 2: Reference of dimensions-IEC 60401-2: 2003 |
|
CENELEC EN 60401-3 |
Terms and nomenclature for cores made of magnetically soft ferrites Part 3: Guidelines on the format of data appearing in manufacturers´ catalogues of transformer and inductor cores-IEC 60401-3: 2003 |
|
CENELEC EN 60405 |
Nuclear instrumentation - Constructional requirements and classification of radiometric gauges |
|
CENELEC EN 60432-2 |
Incandescent Lamps - Safety Specifications Part 2: Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes-IEC 60432-2:1999 + A1:2005, modified |
|
CENELEC EN 60454-3-11 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives |
|
CENELEC EN 60454-3-14 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 14: Polytetrafluoroethylene Film Tapes with Pressure-Sensitive Adhesive-IEC 60454-3-14: 2001 |
|
CENELEC EN 60454-3-4 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive |
|
CENELEC EN 60454-3-6 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 6: Polycarbonate Film Tapes with Acrylic Thermoplastic Adhesive-IEC 60454-3-6: 1998 |
|
CENELEC EN 60454-3-7 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 7: Polyimide Film Tapes with Pressure-Sensitive Adhesive-IEC 60454-3-7: 1998 |
|
CENELEC EN 60464-2 |
Varnishes used for electrical insulation Part 2: Methods of test-Incorporating Amendment A1: 03/2006 and Corrigendum: 12/2006 |
|
CENELEC EN 60519-10 |
Safety in electroheat installations Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications-IEC 60519-10:2005 |
|
CENELEC EN 60534-2-3 |
Industrial-Process Control Valves Part 2-3: Flow Capacity - Test Procedures-IEC 60534-2-3:1997; Supersedes EN 60534-2-3:1993 |
|
CENELEC EN 60556 |
Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties-IEC 60556:2006 |
|
CENELEC EN 60567 |
Oil-filled electrical equipment - Sampling of gases and of oil for analysis of free and dissolved gases - Guidance-(IEC 60567):2005 |
|
CENELEC EN 60609-1 |
Hydraulic turbines, storage pumps and pump-turbines Cavitation pitting evaluation Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines-IEC 60609-1:2004 |
|
CENELEC EN 60654-1 |
Industrial-Process Measurement and Control Equipment - Operating Conditions Part 1: Climatic Conditions (IEC 654-1 : 1993) |
|
CENELEC EN 60654-2 |
Operating Conditions for Industrial-Process Measurement and Control Equipment Part 2: Power-IEC 60654-2: 1979 + A1: 1992; Supersedes HD 413.2 S2:1994 |
|
CENELEC EN 60662 |
High Pressure Sodium Vapour Lamps |
|
CENELEC EN 60674-3-1 |
Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 1: Biaxially Oriented Polypropylene (PP) Film for Capacitors-IEC 60674-3-1: 1998 |
|
CENELEC EN 60674-3-2 |
Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Requirements for Balanced Biaxially Oriented Polyethylene Terephthalate (PET) Films Used for Electrical Insulation-IEC 60674-3-2:1992 |
|
CENELEC EN 60684-3-340 TO 342 |
Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 340 to 342: Expandable Braided Polyethylene Terephthalate Textile Sleeving-IEC 60684-3-340 to 342 : 1992 |
|
CENELEC EN 60702-2 |
Mineral Insulated Cables and Their Terminations with a Rated Voltage Not Exceeding 750 V Part 2: Terminations-Supersedes HD 586.2 S1:1994; IEC 60702-2:2002 |
|
CEN EN 60779 |
Industrial electroheat equipment - Test methods for electroslag remelting furnaces-IEC 60779: 2005; Supersedes HD 470 S1: 1987 |
|
CENELEC EN 60810 |
Lamps for road vehicles - Performance requirements-Supersedes EN 60810:1994 + A1:2001 + A2:2001; IEC 60810:2003 |
|
CENELEC EN 60811-2-1 |
Insulating and sheathing materials of electric and optical cables Common test methods Part 2-1: Methods specific to elastomeric compounds Ozone resistance, hot set and mineral oil immersion tests-Includes amendment A1:2001; IEC 60811-2-1:1998 + A1:2001 |
|
CENELEC EN 60814 |
Insulating Liquids - Oil-Impregnated Paper and Pressboard Determination of Water by Automatic Coulometric Karl Fischer Titration-IEC 60814: 1997; Supersedes HD 487 S1: 1987 |
|
CENELEC EN 60836 |
Specifications for unused silicone insulating liquids for electrotechnical purposes-Supersedes HD 565 S1:1993; IEC 60836:2005 |
|
CENELEC EN 60904-7 |
Photovoltaic Devices Part 7: Computation of Spectral Mismatch Error Introduced in the Testing of a Photovoltaic Device-IEC 60904-7: 1998 |
|
CENELEC EN 60953-1 |
Rules for Steam Turbine Thermal Acceptance Tests Part 1: Method A High Accuracy for Large Condensing Steam Turbines (IEC 953-1 : 1990) |
|
CENELEC EN 60953-3 |
Rules for Steam Turbine Thermal Acceptance Tests - Part 3: Thermal Performance Verification Tests of Retrofitted Steam Turbines-IEC 60953-3:2001 |
|
CENELEC EN 60974-3 |
Arc welding equipment Part 3: Arc striking and stabilizing devices-IEC 60974-3: 2003 |
|
CENELEC EN 60974-5 |
Arc Welding Equipment Part 5: Wire Feeders-IEC 60974-5: 2002 |
|
CENELEC EN 61061-3-2 |
Non-Impregnated Densified Laminated Wood for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 2: Sheets Produced from Beech Veneer-IEC 61061-3-2:2001 |
|
CENELEC EN 61065 |
Method for Evaluating the Low Temperature Flow Properties of Mineral Insulating Oils After Ageing (IEC 1065:1991) |
|
CENELEC EN 61086-2 |
Specification for Coatings for Loaded Printed Wire Boards (Conformal Coatings) Part 2: Methods of Test;-(IEC 1086-2 : 2004) |
|
CENELEC EN 61125 |
Unused hydrocarbon-based insulating liquids Test methods for evaluating the oxidation stability-Includes amendment A1:2004; Supersedes HD 486 S1:1987 |
|
CENELEC EN 61199 |
Single-Capped Fluorescent Lamps - Safety Specifications-IEC 61199: 1999 |
|
CENELEC EN 61212-3-1 |
Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Part 3: Specifications for individual materials Sheet 1: Round laminated rolled tubes-IEC 61212-3-1:2006 |
|
CENELEC EN 61228 |
Method of Measuring and Specifying the UV-Radiation of Ultraviolet Lamps Used for Sun-Tanning-Includes Amendment A1: 1996; IEC 1228: 1993 + A1: 1996 |
|
CENELEC EN 61238-1 |
Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) Part 1: Test methods and requirements-IEC 61238-1:2003, modified |
|
CENELEC EN 61284 |
Overhead Lines - Requirements and Tests for Fittings-IEC 61284: 1997 |
|
CENELEC EN 61298-1 |
Process Measurement and Control Devices General Methods and Procedures for Evaluating Performance Part 1: General Considerations (IEC 1298-1 : 1995) |
|
CENELEC EN 61334-3-22 |
Distribution Automation Using Distribution Line Carrier Systems Part 3-22: Mains Signalling Requirements - MV Phase-to-Earth and Screen-to-Earth Intrusive Coupling Devices-IEC 61334-3-22:2001 |
|
CENELEC EN 61340-3-1 |
Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms |
|
CENELEC EN 61434 |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Guide to the Designation of Current in Alkaline Secondary Cell and Battery Standards-IEC 1434: 1996 |
|
CENELEC EN 61478 |
Live Working - Ladders of Insulating Material-Including Amendment A1: 2003; IEC 61478: 2001 |
|
CENELEC EN 61514 |
Industrial-Process Control Systems - Methods of Evaluating the Performance of Valve Positioners with Pneumatic Outputs-IEC 61514: 2000, Modified |
|
CENELEC EN 61621 |
Dry, Solid Insulating Materials - Resistance Test to High-Voltage, Low-Current Arc Discharges-IEC 61621: 1997 |
|
CENELEC EN 61660-1 |
Short-Circuit Currents in D.C. Auxiliary Installations in Power Plants and Substations Part 1: Calculation of Short-Circuit Currents-IEC 61660-1:1997 |
|
CENELEC EN 61702 |
Rating of Direct Coupled Photovoltaic (PV) Pumping Systems-IEC 61702:1995 |
|
CENELEC EN 61721 |
Susceptibility of a Photovoltaic (PV) Module to Accidental Impact Damage (Resistance to Impact Test)-IEC 61721: 1995 |
|
CENELEC EN 61730-1 |
Photovoltaic (PV) module safety qualification Part 1: Requirements for construction |
|
CENELEC EN 61788-8 |
Superconductivity Part 8: AC loss measurements - Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method-IEC 61788-8:2003 |
|
CENELEC EN 61811-51 |
Electromechanical All-or-Nothing Relays Part 51: Blank Detail Specification Electromechanical All-or-Nothing Telecom Relays of Assessed Quality Non-Standardized Types and Construction-Supersedes BEN 116501: 1996; IEC 61811-51: 2002 |
|
CENELEC EN 61811-53 |
Electromechanical All-or-Nothing Relays Part 53: Blank Detail Specification Electromechanical All-or-Nothing Telecom Relays of Assessed Quality Two Change-Over Contacts, 14 mm x 9 mm Base-IEC 61811-53: 2002; Supersedes EN 116503: 1992 + A1: 1995 |
|
CENELEC EN 62013-2 |
Caplights for use in mines susceptible to firedamp Part 2: Performance and other safety-related matters-IEC 62013-2: 2005 |
|
CENELEC EN 62026-1 |
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules |
|
CENELEC EN 62044-2 |
Cores made of soft magnetic materials - Measuring methods Part 2: Magnetic properties at low excitation level-IEC 62044-2:2005 |
|
CENELEC EN 62053-61 |
Electricity Metering Equipment (a.c.) Particular Requirements Part 61: Power Consumption and Voltage Requirements-IEC 62053-61:1998 |
|
CENELEC EN 62076 |
Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces-IEC 62076:2006; Supersedes HD 610 S1:1992 and EN 60646:1998 |
|
CENELEC EN 62211 |
Inductive components Reliability management-IEC 62211:2003 |
|
CENELEC EN 62231 |
Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria |
|
CENELEC EN 62271-3 |
High-voltage switchgear and controlgear Part 3: Digital interfaces based on IEC 61850-IEC 62271-3:2006 |
|
CENELEC EN 62282-3-1 |
Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
|
CENELEC EN 62317-4 |
Ferrite cores - Dimensions Part 4: RM-cores and associated parts-IEC 62317-4:2005;:1997 + A2:1998 |
|
CENELEC EN 62329-1 |
Heat shrinkable moulded shapes Part 1: Definitions and general requirements-Incorporates corrigendum: December 2006 |
|
CENELEC EN 62337 |
Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones |
|
CENELEC EN 62381 |
Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT) and site integration test (SIT) |
|
CEN EN 694 |
Fire-Fighting Hoses - Semi-Rigid Hoses for Fixed Systems-incorporates amendment a1: 4/2007 |
|
CEN EN 737-4 |
Medical Gas Pipeline Systems - Part 4: Terminal Units for Anaesthetic Gas Scavenging Systems - Basic Requirements |
|
CEN EN 738-4 |
Pressure regulators for use with medical gases - Part 4: Low-pressure regulators intended for incorporation into medical equipment-Includes Amendment A1: 2002 |
|
CEN EN 792-1 |
Hand-Held Non-Electric Power Tools - Safety Requirements - Part 1: Assembly Power Tools for Non-Threaded Mechanical Fasteners |
|
CEN EN 792-3 |
Hand-Held Non-Electric Power Tools - Safety Requirements - Part 3: Drills and Tappers |
|
CEN EN 792-5 |
Hand-Held Non-Electric Power Tools - Safety Requirements - Part 5: Rotary Percussive Drills |
|
CEN EN 876 |
Destructive Tests on Welds in Metallic Materials - Longitudinal Tensile Test on Weld Metal in Fusion Welded Joints |
|
CEN EN ISO 10684 |
Fasteners - Hot dip galvanized coatings-ISO 10684:2004 |
|
CEN EN ISO 1071 |
Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification-ISO 1071:2003 |
|
CEN EN ISO 11114-1 |
Transportable Gas Cylinders - Compatibility of Cylinder and Valve Materials with Gas Contents - Part 1: Metallic Materials-Incorporates Corrigendum April 1998; ISO 11114-1:1997 |
|
CEN EN ISO 11116-1 |
Gas Cylinders - 17E Taper Thread for Connection of Valves to Gas Cylinders - Part 1: Specifications-ISO 11116-1:1999 |
|
CEN EN ISO 11116-2 |
Gas Cylinders - 17E Taper Thread for Connection of Valves to Gas Cylinders - Part 2: Inspection Gauges-ISO 11116-2: 1999 |
|
CEN EN ISO 11161 |
Safety of machinery - Integrated manufacturing systems - Basic requirements |
|
CEN EN ISO 11593 |
Manipulating Industrial Robots - Automatic End Effector Exchange Systems - Vocabulary and Presentation of Characteristics-ISO 11593: 1996 |
|
CEN EN ISO 11621 |
Gas cylinders - Procedures for change of gas service-ISO 11621: 1997; Supersedes EN 1795: 1998 |
|
CEN EN ISO 12209-2 |
Gas Cylinders - Outlet Connections for Gas Cylinder Valves for Compressed Breathable Air - Part 2: Threaded Connections-ISO 12209-2:2000 |
|
CEN EN ISO 12687 |
Metallic Coatings - Porosity Tests - Humid Sulfur (Flowers of Sulfur) Test-ISO 12687:1996 |
|
CEN EN ISO 13478 |
Thermoplastics Pipes for the Conveyance of Fluids - Determination of Resistance to Rapid Crack Propagation (RCP) - Full-Scale Test (FST)-ISO 13478: 1977 |
|
CEN EN ISO 14270 |
Specimen Dimensions and Procedure for Mechanized Peel Testing Resistance Spot, Seam and Embossed Projection Welds-ISO 14270: 2000 |
|
CEN EN ISO 14272 |
Specimen Dimensions and Procedure for Cross Tension Testing Resistance Spot and Embossed Projection Welds-ISO 14272: 2000 |
|
CEN EN ISO 14579 |
Hexalobular Socket Head Cap Screws-ISO 14579:2001 |
|
CEN EN ISO 14586 |
Hexalobular Socket Countersunk Head Tapping Screws-ISO 14586: 2001 |
|
CEN EN ISO 14847 |
Rotary Positive Displacement Pumps - Technical Requirements-ISO 14847: 1999 |
|
CEN EN ISO 14922-1 |
Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 1: Guidance for Selection and Use |
|
CEN EN ISO 14922-4 |
Thermal Spraying - Quality Requirements of Thermally Sprayed Structures - Part 4: Elementary Quality Requirements-ISO 14922-4:1999 |
|
CEN EN ISO 15011-1 |
Health and Safety in Welding and Allied Processes - Laboratory Method for Sampling Fume and Gases Generated by Arc Welding - Part 1: Determination of Emission Rate and Sampling for Analysis of Particulate Fume-ISO 15011-1:2002 |
|
CEN EN ISO 15011-3 |
Health and safety in welding and allied processes Laboratory method for sampling fume and gases generated by arc welding Part 3: Determination of ozone concentration using fixed point measurements-ISO 15011-3: 2002 |
|
CEN EN ISO 15614-4 |
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings-ISO 15614-4: 2005 |
|
CEN EN ISO 15618-1 |
Qualification Testing of Welders for Under-Water Welding - Part 1: Diver-Welders for Hyperbaric Wet Welding-ISO 15618-1:2001 |
|
CEN EN ISO 15721 |
Metallic Coatings - Porosity Tests - Porosity in Gold or Palladium Coatings by Sulfurous Acid/Sulfur Dioxide Vapour-ISO 15721:2001 |
|
CEN EN ISO 15744 |
Hand-Held Non-Electric Power Tools - Noise Measurement Code - Engineering Method (Grade 2)-ISO 15744: 2002 |
|
CEN EN ISO 15874-1 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General-Incorporates Amendment A1: June 2007 |
|
CEN EN ISO 15875-1 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General-Incorporates Amendment A1: June 2007 |
|
CEN EN ISO 15875-3 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings-ISO 15875-3:2003 |
|
CEN EN ISO 15876-2 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes-Incorporates Amendment A1: June 2007 |
|
CEN EN ISO 15877-3 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings-ISO 15877-3:2003 |
|
CEN EN ISO 15975 |
Closed end blind rivets with break pull mandrel and protruding head AI/AIA-ISO 15975: 2002 |
|
CEN EN ISO 15980 |
Open end blind rivets with break pull mandrel and countersunk head St/St-ISO 15980: 2002 |
|
CEN EN ISO 15982 |
Open end blind rivets with break pull mandrel and countersunk head AIA/AIA-ISO 15982: 2002 |
|
CEN EN ISO 15983 |
Open end blind rivets with break pull mandrel and protruding head A2/A2-ISO 15983: 2002 |
|
CEN EN ISO 16137 |
Industrial valves - Check valves of thermoplastics materials-ISO 16137:2006 |
|
CEN EN ISO 16138 |
Industrial Valves - Diaphragm Valves of Thermoplastic Materials-ISO 16138:2006 |
|
CEN EN ISO 16348 |
Metallic and other inorganic coatings Definitions and conventions concerning appearance-ISO 16348:2003 |
|
CEN EN ISO 16432 |
Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) |
|
CEN EN ISO 16583 |
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt-ISO 16583:2002 |
|
CEN EN ISO 17642-2 |
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Selfrestraint tests-ISO 17642-2:2005 |
|
CEN EN ISO 17642-3 |
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests-ISO 17642-3:2005 |
|
CEN EN ISO 17652-1 |
Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 1: General Requirements-ISO 17652-1:2003 |
|
CEN EN ISO 17652-2 |
Welding - Test for Shop Primers in Relation to Welding and Allied Processes - Part 2: Welding Properties of Shop Primers-ISO 17652-2:2003 |
|
CEN EN ISO 17654 |
Destructive tests on welds in metallic materials Resistance welding Pressure test on resistance seam welds-ISO 17654:2003 |
|
CEN EN ISO 17657-4 |
Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system |
|
CEN EN ISO 18273 |
Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification-(ISO 18273:2004) |
|
CEN EN ISO 18595 |
Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing |
|
CEN EN ISO 21968 |
Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phasesensitive eddy-current method |
|
CEN EN ISO 24034 |
Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification-ISO 24034: 2005 |
|
CEN EN ISO 2819 |
Metallic Coatings on Metallic Substrates - Electrodeposited and Chemically Deposited Coatings - Review of Methods Available for Testing Adhesion-ISO 2819 : 1980 |
|
CEN EN ISO 3994 |
Plastics Hoses - Helical-Thermoplastic-Reinforced Thermoplastics Hoses for Suction and Discharge of Aqueous Materials - Specification-Supersedes EN 23994:1993; ISO 3994:1998 |
|
CEN EN ISO 4538 |
Metallic Coatings - Thioacetamide Corrosion Test (TAA Test) (ISO 4538:1978) |
|
CEN EN ISO 4543 |
Metallic and Other Non-Organic Coatings - General Rules for Corrosion Tests Applicable for Storage Conditions (ISO 4543 : 1981) |
|
CEN EN ISO 580 |
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating-ISO 580:2005; Supersedes EN 763: 1994 |
|
CEN EN ISO 6134 |
Rubber hoses and hose assemblies for saturated steam - Specification-ISO 6134:2005 |
|
CEN EN ISO 6157-2 |
Fasteners - Surface discontinuities - Part 2: Nuts-ISO 6157-2:1995: Supersedes EN 493:1992 |
|
CEN EN ISO 6224 |
Plastics Hoses, Textile-Reinforced, for General-Purpose Water Applications - Specification-ISO 6224: 1995 |
|
CEN EN ISO 7287 |
Graphical symbols for thermal cutting equipment-ISO 7287: 2002 |
|
CEN EN ISO 7291 |
Gas Welding Equipment - Pressure Regulators for Manifold Systems Used in Welding, Cutting and Allied Processes up to 300 Bar-ISO 7291:1999 |
|
CEN EN ISO 7686 |
Plastics pipes and fittings - Determination of opacity-Supersedes EN 578:1993 |
|
CEN EN ISO 7721-2 |
Countersunk Flat Head Screws - Part 2: Penetration Depth of Cross Recesses; (ISO 7721-2) |
|
CEN EN ISO 8166 |
Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machine settings-ISO 8166:2003 |
|
CEN EN ISO 8205-2 |
Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables-ISO 8205-2: 2002 |
|
CEN EN ISO 8289 |
Vitreous and Porcelain Enamels - Low Voltage Test for Detecting and Locating Defects-ISO 8289:2000 |
|
CEN EN ISO 8662-10 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 10: Nibblers and Shears-ISO 8662-10: 1998 |
|
CEN EN ISO 8662-14 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 14: Stone-Working Tools and Needle Scalers-ISO 8662-14: 1996 |
|
CEN EN ISO 8662-8 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 8: Polishers and Rotary, Orbital and Random Orbital Sanders-ISO 8662-8: 1997 |
|
CEN EN ISO 8735 |
Parrallel Pins with Internal Thread, of Hardened Steel or Martensitic Stainless Steel-ISO 8735:1997; Supersedes EN 28735:1992 |
|
CEN EN ISO 8742 |
Grooved Pins - One-Third-Length Centre Grooved-ISO 8742:1997; Supersedes EN 28742:1992 |
|
CEN EN ISO 8746 |
Grooved Pins with Round Head-ISO 8746:1997; Supersedes EN 28746:1992 |
|
CEN EN ISO 8750 |
Spring-Type Straight Pins - Coiled, Standard Duty |
|
CEN EN ISO 8795 |
Plastics piping systems for the transport of water intended for human consumption Migration assessment Determination of migration values of plastics pipes and fittings and their joints-ISO 8795: 2001 |
|
CEN EN ISO 9018 |
Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints-ISO 9018:2003 |
|
CEN EN ISO 9455-10 |
Soft Soldering Fluxes - Test Methods - Part 10: Flux Efficacy Test, Solder Spresd Method-ISO 9455-10:1998 |
|
CEN EN ISO 9455-16 |
Soft soldering fluxes - Test methods - Part 16: Flux efficacy tests, wetting balance method-ISO 9455-16: 1998 |
|
CEN EN ISO 9455-9 |
Soft Soldering Fluxes - Test Methods - Part 9: Determination of Ammonia Content (ISO 9455-9 : 1993) |
|
CEN EN ISO 9692-3 |
Welding and Allied Processes - Recommendations for Joint Preparation - Part 3: Metal Inert Gas Welding and Tungsten Inert Gas Welding of Aluminium and its Alloys-ISO 9692-3:2000; Includes Amendment A1:2003 |
|
CEN EN ISO 9969 |
Thermoplastic Pipes - Determination of Ring Stiffness (ISO 9969 : 1994) |
|
CEN ENV 12977-1 |
Thermal Solar Systems and Components - Custom Built Systems - Part 1: General Requirements |
|
CEN ENV 1401-3 |
Plastics Piping Systems for Non-Pressure Underground Drainage and Sewerage - Unplasticized Poly(Vinyl Chloride) (PVC-U) - Part 3: Guidance for Installation |
|
CEN ENV 1455-2 |
Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Acrylonitrile-Butadiene-Styrene (ABS) - Part 2: Guidance for the Assessment of Conformity |
|
CEN ENV 1566-2 |
Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Chlorinated Poly (Vinyl Chloride) (PVC-C) - Part 2: Guidance for the Assessment of Conformity |
|
CEN ENV 737-6 |
Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum |
|
CENELEC HD 109.1 S1 |
Miniature Fuses Part 1: Definitions for Miniature Fuses and General Requirements for Miniature Fuse-Links |
|
CENELEC HD 109.3 S1 |
Miniature Fuses Part 3: Sub-Miniature Fuse-Links |
|
CENELEC HD 119 |
Fuse-Holders for Miniature Cartridge Fuse-Links |
|
CENELEC HD 184 S4 |
A.C. Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1kv and up to and Including 72.5kV |
|
CENELEC HD 187 S5 |
A.C. Metal-Enclosed Switchgear and Control Gear for Rated Voltages Above 1 kV and up to and Including 52 kV |
|
CENELEC HD 211.2 S8 |
Primary Batteries - Part 2: Specification Sheets |
|
CENELEC HD 22.10 S1/A1 |
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 10: EPR Insulated and Polyurethane Sheathed Flexible Cable |
|
CENELEC HD 22.12 S1/A1 |
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 12: Heat Resistant EPR Cords and Flexible Cables |
|
CENELEC HD 22.14 S1/A1 |
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 14: Cords for Applications Requiring High Flexibility |
|
CENELEC HD 23 |
Electrical Installations for Caravans with Supply Voltages up to 250 V |
|
CENELEC HD 231 |
Dimensions of Three-Phase Induction Motors-Superseded by EN 50347:2001 |
|
CENELEC HD 250.2 |
General Specification for Electric Motor Operated Appliances for Household and Similar Purposes |
|
CENELEC HD 277 S1 |
Safety of Household and Similar Electrical Appliances - Particular Requirements for Motor- Compressors |
|
CENELEC HD 278 S1/ A5 |
AMD 5 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Room Heaters; |
|
CENELEC HD 280.3 S1 |
Safety Requirements for Electric Fans and Regulators Part 3: Jet Fans-Superseded by EN 60335-2-80: 1997 |
|
CENELEC HD 307.2 S1 |
Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 2: Methods of Test |
|
CENELEC HD 307.2.2 S1 |
Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 2: Methods of Test. Test Methods for Coating Powders for Electrical Purposes |
|
CENELEC HD 307.3.2 S1 |
Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 3: Specifications for Individual Materials. Sheet Two: Quartz Filled Epoxy Resinous Compounds |
|
CENELEC HD 348 S3 |
High Voltage Alternating- Current Circuit-Breakers |
|
CENELEC HD 352.1 S2 |
Specification for Insulating Materials Based on Mica-Part 1: Definitions and General Requirements |
|
CENELEC HD 365 S3 |
Classification of Degrees of Protection Provided by Enclosures |
|
CENELEC HD 388 |
Transformers for Tubular Discharge Lamps Having a No-Load Output Voltage Exceeding 1000 V (Generally Called Neon- Transformers) |
|
CENELEC HD 389 |
Safety Rules Concerning Electrical Equipment of Machines for Resistance Welding and Allied Processes |
|
CENELEC HD 390 |
Inductive Voltage Dividers |
|
CENELEC HD 393 |
Outside Diameters of Conduits for Electrical Installations and Threads for Conduits and Fittings |
|
CENELEC HD 398.2 S1/ A1 |
AMD 1 Power Transformers Part 2: Temperature Rise-Superseded by EN 60076-2: 1997 |
|
CENELEC HD 400.2 S2 |
Hand-Held Motor Operated Tools - Part II: Particular Specifications Section E: Circular Saws and Circular Knives |
|
CENELEC HD 400.2A S1 PRA2 |
AMD prA2 Hand-Held Motor Operated Tools Part II: Particular Specifications Section A: Drills-Superseded by EN 50144-2-1: 1995 |
|
CENELEC HD 400.2D/A1 |
AMD 1 Hand-Held Motor Operated Tools Part II: Particular Specifications (Section D) |
|
CENELEC HD 400.2E/A1 |
AMD 1 Hand-Held Motor Operated Tools Part II: Particular Specifications Section E: Circular Saws and Circular Knives |
|
CENELEC HD 400.2F S1 PRA1 |
AMD 1 Hand-Held Motor Operated Tools Part II: Particular Specifications Section F: Hammers |
|
CENELEC HD 400.3 |
Hand-Held Motor Operated Tools - Part 2 : Particular Specifications |
|
CENELEC HD 402 S2 |
Standard Colours for Thermoplastic Materials Used for the Insulation for Low-Frequency Cables and Wires |
|
CENELEC HD 418 |
Low-Voltage Switchgear and Controlgear Circuit- Breakers |
|
CENELEC HD 42.3 S2 |
Basic Dimensions of Winding Wires - Part 3: Dimensions of Conductors of Rectangular Copper Winding Wires |
|
CENELEC HD 42.4 S1 |
Basic Dimensions of Winding Wires Part 4: Diameters of Conductors for Round Resistance Wires |
|
CENELEC HD 426.3 S1 |
Specification for Ceramic and Glass Insulating Materials- Part 3: Individual Materials |