|
CENELEC HD 427 |
Specific Safety Rules for the Installation of Equipment for Electric Arc Welding and Allied Processes |
|
CENELEC HD 444.2.1 |
Fire Hazard Testing Part 2: Test Methods Glow- Wire Test and Guidance |
|
CENELEC HD 464 S1 |
Dry-Type Power Transformers-Includes Amendment A1:1988, A2:1991, A3:1992, A4:1995 and A5:2002; IEC 60726:1982 + A1:1986, Modified |
|
CENELEC HD 474 S1 |
Dimensions of Ball and Socket Couplings of String Insulator Units |
|
CENELEC HD 492.1 S2/ A1 |
AMD 1 High-Voltage Fuses Part 1: Current Limiting Fuses |
|
CENELEC HD 497 S1 |
Specifications for Unused Insulating Liquids Based on Synthetic Aromatic Hydrocarbons |
|
CENELEC HD 516 S1/A1 |
AMD 1 Guide to Use of Low Voltage Harmonized Cables |
|
CENELEC HD 516 S1/A5 |
AMD 5 Guide to Use of Low Voltage Harmonized Cables |
|
CENELEC HD 523.2 S1 |
Specification for Flexible Insulating Sleeving-Part 2: Methods of Tests |
|
CENELEC HD 523.3.320 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheet 320: Polyethylene Terephthalate Textile, Lightly Impregnated (IEC 684-3-320 : 1987) |
|
CENELEC HD 523.3.320 S1 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving |
|
CENELEC HD 523.3.400 TO 402 S1 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 400 to 402: Glass Textile Sleeving with Silicone Elastomer Coating |
|
CENELEC HD 53.2 |
Rotating Electrical Machines Part 2 Methods for Determining Losses and Efficiency of Rotating Electrical Machinery from Tests (Excluding Machines for Traction Vehicles) |
|
CENELEC HD 53.7 S1 |
Rotating Electrical Machines Part 7: Symbols for Types of Construction and Mounting Arrangements of Rotating Electrical Machinery |
|
CENELEC HD 533 S1 |
Short-Circuit Current Calculation in Three- Phase a.c. Systems-Superseded by EN 60909-0:2001 |
|
CENELEC HD 539 S1 |
Reactors |
|
CENELEC HD 542 S1 |
Insulating Poles (Insulating Sticks) and Universal Tool Attachments (Fittings) for Live Working |
|
CENELEC HD 555.0.2 S2 |
Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 2 - Enamelled Rectangular Copper Wire |
|
CENELEC HD 555.0.3 S1 |
Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 3: Enamelled Round Aluminium Wire-Superseded by CENELEC EN 60 317-0-3: 1994 |
|
CENELEC HD 555.0.4 S1 |
Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 4: Glass-Fibre Wound Bare or Enamelled Rectangular Copper Wire |
|
CENELEC HD 555.1 S1 |
Specifications for Particular Types of Winding Wires Part 1: Polyvinyl Acetal Enamelled Round Copper Winding Wire, Class 105 |
|
CENELEC HD 555.11 S1 |
Specifications for Particular Types of Winding Wires Part 11: Bunched Solderable Polyurethane Enamelled Round Copper Wires, Class 130, with Silk Covering |
|
CENELEC HD 555.13 S1 |
Specifications for Particular Types of Winding Wires Part 13: Polyester (imide) Overcoated with Polyamide-Imide, Enamelled Round Copper Winding Wire, Class 200 |
|
CENELEC HD 555.14 S2 |
Specifications for Particular Types of Winding Wires Part 14: Polyvinyl Acetal Enamelled Round Aluminium Wire, Class 105 |
|
CENELEC HD 555.16 S2 |
Specifications for Particular Types of Winding Wires Part 16: Polyester Enamelled Rectangular Copper Wire, Class 155-Superseded by EN 60317-16: 1994 |
|
CENELEC HD 555.18 S2 |
Specifications for Particular Types of Winding Wires Part 18: Polyvinyl Acetal Enamelled Rectangular Copper Wire, Class 120 |
|
CENELEC HD 555.2 S1 |
Specifications for Particular Types of Winding Wires Part 2: Solderable Polyurethane Enamelled Round Copper Winding Wire, Class 130, with a Bonding Layer |
|
CENELEC HD 555.20 S1 |
Specifications for Particular Types of Winding Wires Part 20: Solderable Polyurethene Enamelled Round Copper Winding Wire, Class 155 |
|
CENELEC HD 555.24 S1 |
Specifications for Particular Types of Winding Wires Part 24: Polyester (Imide) Enamelled Round Aluminium Winding Wire Overcoated with Polyamide, Class 180 |
|
CENELEC HD 555.27 S1 |
Specification for Particular Types of Winding Wires Part 27: Paper Covered Rectangular Copper Winding Wire |
|
CENELEC HD 555.27 S2 |
Specifications for Particular Types of Winding Wires Part 27: Paper Covered Rectangular Copper Wire |
|
CENELEC HD 555.33 S1 |
Specifications for Particular Types of Winding Wires Part 33: Glass-Fibre Wound, Silicone Varnish-Treated, Bare or Enamelled Rectangular Copper Wire, Temperature Index 200-Superseded by EN 60 317-33:1996 |
|
CENELEC HD 564 S1 |
Nominal Dimensions of Cylindrical Machined Graphite Electrodes with Threaded Sockets and Nipples for Use in Electric Arc Furnaces-Superseded by EN 60239: 1997 |
|
CENELEC HD 586.3 S1 |
Mineral Insulated Cables with a Rated Voltage Not Exceeding 750 V Part 3: Guide to Use |
|
CENELEC HD 607 S1 |
Busbar Bushings up to 1 kV and from 1,25 kA to 5 kA, for Liquid Filled Transformers |
|
CENELEC HD 614 S1 |
Direct-Current Resistive Volt Ratio Boxes-Superseded by EN 60524: 1993 |
|
CENELEC HD 65.2 |
Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 2: Lampholders |
|
CEN CEN ISO/TR 17641-3 |
Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 3: Externally loaded tests-ISO/TR 17641-3:2005 |
|
CEN CEN/TR 13480-7 |
Metallic Industrial Piping - Part 7: Guidance on the Use of Conformity Assessment Procedures |
|
CEN CEN/TR 14585-2 |
Corrugated metal hose assemblies for pressure applications - Part 2: Guidance on the use of conformity assessment procedures |
|
CEN CEN/TS 12200-2 |
Plastics rainwater piping systems for above ground external use Unplasticized poly(vinyl chloride) (PVC-U) Part 2: Guidance for the assessment of conformity |
|
CEN CEN/TS 14758-2 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifier(s) (PP-MD) - Part 2: Guidance for the assessment of conformity |
|
CENELEC CLC/TR 50442 |
Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fields-Supersedes R106-001:2002 |
|
CENELEC CLC/TR 61800-6 |
Adjustable speed electrical power drive systems - Part 6: Guide for determination of types of load duty and corresponding current ratings |
|
CENELEC CLC/TS 50217 |
Guide for in situ measurements - In situ measurement of disturbance emission |
|
CENELEC CLC/TS 62081 |
Arc Welding Equipment - Installation and Use-IEC 62081:1999; Replaces HD 407 S1:1980 and HD 427 S1:1981 |
|
CENELEC CLC-TS 61643-22 |
Low-voltage surge protective devices Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles |
|
CEN EN 10090 |
Valve Steels and Alloys for Internal Combustion Engines |
|
CEN EN 10169-3 |
Continuously organic coated (coil coated) steel flat products Part 3: Products for building interior applications |
|
CEN EN 10244-2 |
Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 2: Zinc or Zinc Alloy Coatings-Incorporating Corrigendum April 2001 |
|
CEN EN 10244-5 |
Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 5: Nickel Coatings |
|
CEN EN 10246-10 |
Non-Destructive Testing of Steel Tubes - Part 10: Radiographic Testing of the Weld Seam Automatic Fusion Arc Welded Steel Tubes for the Detection of Imperfections |
|
CEN EN 10280 |
Magnetic Materials - Methods of Measurement of the Magnetic Properties of Electrical Sheet and Strip by Means of a Single Sheet Tester |
|
CEN EN 10298 |
Steel tubes and fittings for on shore and offshore pipelines - Internal lining with cement mortar |
|
CEN EN 10311 |
Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
|
CEN EN 10332 |
Magnetic Materials Permanent magnet (magnetically hard) materials Methods of measurement of magnetic Properties |
|
CEN EN 1113 |
Showers Hoses for (PN 10) Sanitary Tapware |
|
CEN EN 1117 |
Heat exchangers Liquid-cooled refrigerant condensers Test procedures for establishing the performance-Includes amendment A1: 2002 |
|
CEN EN 1118 |
Heat exchangers Refrigerant cooled liquid coolers Test procedures for establishing the performance-Includes amendment A1:2002 |
|
CEN EN 1123-1 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Part 1: Requirements, testing, quality control-Includes Amendment A1:2004 |
|
CEN EN 1124-3 |
Pipes and Fittings of Longitudinally Welded Stainless Steel Pipes with Spigot and Socket for Waste Water Systems - Part 3: System X; Dimensions |
|
CEN EN 1151-2 |
Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2: Noise test code (vibroacoustics) for measuring structure- and fluid-borne noise |
|
CEN EN 12074 |
Welding Consumables - Quality Requirements for Manufacture, Supply and Distribution of Consumables for Welding and Allied Processes |
|
CEN EN 12101-2 |
Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators |
|
CEN EN 12106 |
Plastics Piping Systems - Polyethylene (PE) Pipes - Test Method for the Resistance to Internal Pressure After Application of Squeeze-Off |
|
CEN EN 12186 |
Gas Supply Systems - Gas Pressure Regulating Stations for Transmission and Distribution - Functional Requirements-Amendment A1: 08/2005 |
|
CEN EN 12200-1 |
Plastics Rainwater Piping Systems for Above Ground External Use - Unplasticized Poly (Vinyl Chloride) (PVC-U) - Part 1: Specifications for Pipes, Fittings and the System |
|
CEN EN 12245 |
Transportable Gas Cylinders - Fully Wrapped Composite Cylinders |
|
CEN EN 12288 |
Industrial valves - Copper alloy gate valves |
|
CEN EN 12309-2 |
Gas-Fired Absorption and Adsorption Air-Conditioning and/or Heat Pump Appliances with a Net Heat Input Not Exceeding 70 kW - Part 2: Rational Use of Energy |
|
CEN EN 12373-13 |
Aluminium and Aluminium Alloys - Anodizing - Part 13: Measurement of Reflectance Characteristics of Aluminium Surfaces Using a Goniophotometer or an Abridged Goniophotometer |
|
CEN EN 12373-15 |
Aluminium and Aluminium Alloys - Anodizing - Part 15: Assessment of Resistance of Anodic Oxidation Coatings to Cracking by Deformation |
|
CEN EN 12373-17 |
Aluminium and Aluminium Alloys - Anodizing - Part 17: Determination of Electric Breakdown Potential |
|
CEN EN 12479 |
Wood Poles for Overhead Lines - Sizes - Methods of Measurement and Permissible Deviations |
|
CEN EN 12502-5 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyed steels |
|
CEN EN 12509 |
Timber Poles for Overhead Lines - Test Methods - Determination of Modulus of Elasticity, Bending Strength, Density and Moisture Content |
|
CEN EN 12516-3 |
Valves - Shell design strength - Part 3: Experimental method-Incorporating corrigendum September 2003 |
|
CEN EN 12533 |
Castors and Wheels - Castors and Wheels for Applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h) |
|
CEN EN 12560-1 |
Flanges and Their Joints - Gaskets for Class-Designated Flanges - Part 1: Non-Metallic Flat Gaskets with or without Inserts |
|
CEN EN 12570 |
Industrial Valves - Method for Sizing the Operating Element |
|
CEN EN 12755 |
Transportable Gas Cylinders - Filling Conditions for Acetylene Bundles |
|
CEN EN 12756 |
Mechanical Seals - Principal Dimensions, Designation and Material Codes |
|
CEN EN 1277 |
Plastics Piping Systems - Thermoplastics Piping Systems for Buried Non- Pressure Applications - Test Methods for Leaktightness of Elastomeric Sealing Ring Type Joints |
|
CEN EN 12807 |
Transportable Refillable Brazed Steel Cylinders for Liquefied Petroleum Gas (LPG) - Design and Construction |
|
CEN EN 12814-2 |
Testing of Welded Joints of Thermoplastics Semi-Finished Products - Part 2: Tensile Test |
|
CEN EN 12814-4 |
Testing of Welded Joints of Thermoplastics Semi-Finished Products - Part 4: Peel Test |
|
CEN EN 12862 |
Transportable Gas Cylinders - Specification for the Design and Construction of Refillable Transportable Welded Aluminium Alloy Gas Cylinders |
|
CEN EN 12921-1 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements |
|
CEN EN 1295-1 |
Structural Design of Buried Pipelines under Various Conditions of Loading - Part 1: General Requirements |
|
CEN EN 12952-16 |
Water-tube boilers and auxiliary installations Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler |
|
CEN EN 12952-6 |
Water-Tube Boilers and Auxiliary Installations - Part 6: Inspection During Construction; Documentation and Marking of Pressure Parts of the Boiler |
|
CEN EN 12953-8 |
Shell Boilers - Part 8: Requirements for Safeguards Against Excessive Pressure-Incorporating Corrigendum May 2002 |
|
CEN EN 13081 |
Tanks for Transport of Dangerous Goods - Service Equipment for Tanks - Vapour Collection Adapter and Coupler |
|
CEN EN 13082 |
Tanks for Transport of Dangerous Goods - Service Equipment for Tanks - Vapour Transfer Valve |
|
CEN EN 13110 |
Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) Design and construction |
|
CEN EN 13181 |
Ventilation for Buildings - Terminals - Performance Testing of Louvres Subject to Simulated Sand |
|
CEN EN 13215 |
Condensing Units for Refrigeration - Rating Conditions, Tolerances and Presentation of Manufacturer´s Performance Data |
|
CEN EN 13244-2 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes |
|
CEN EN 13244-3 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings |
|
CEN EN 13293 |
Transportable gas cylinders Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide |
|
CEN EN 13347 |
Copper and copper alloys Rod and wire for welding and braze welding |
|
CEN EN 13348 |
Copper and Copper Alloys - Seamless, Round Copper Tubes for Medical Gases or Vacuum-Amendment 1: April 2005 |
|
CEN EN 13365 |
Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling-Includes Amendment A1:2005 |
|
CEN EN 13371 |
Cryogenic Vessels - Couplings for Cryogenic Service |
|
CEN EN 13397 |
Industrial Valves - Diaphragm Valves Made of Metallic Materials |
|
CEN EN 13483 |
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
|
CEN EN 13523-18 |
Coil Coated Metals - Test Methods - Part 18: Resistance to Staining |
|
CEN EN 13523-21 |
Coil coated metals Test methods Part 21: Evaluation of outdoor exposed panels |
|
CEN EN 13523-23 |
Coil Coated Metals - Test Methods - Part 23: Colour Stability in Humid Atmospheres Containing sulfur Dioxide-(F) |
|
CEN EN 13523-5 |
Coil Coated Metals - Test Methods - Part 5: Resistance to Rapid Deformation (Impact Test) |
|
CEN EN 13648-3 |
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing |
|
CEN EN 13689 |
Guidance on the classification and design of plastics piping systems used for renovation |
|
CEN EN 13807 |
Transportable gas cylinders - Battery vehicles - Design, manufacture, identification and testing-Incorporating Corrigendum: June 2005 |
|
CEN EN 13858 |
Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components |
|
CEN EN 13918 |
Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests |
|
CEN EN 13952 |
LPG equipment and accessories - Filling procedures for LPG cylinders-Includes Amendment A1:2006 |
|
CEN EN 13953 |
Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)-Incporporates Amendment 1: March 2007 |
|
CEN EN 1395-5 |
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers |
|
CEN EN 14141 |
Valves for natural gas transportation in pipelines - Performance requirements and tests-Ratified European Text |
|
CEN EN 14197-3 |
Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements-Incorporating corrigendum August 2004 and amendment A1:2005 |
|
CEN EN 14291 |
Foam producing solutions for leak detection on gas installations |
|
CEN EN 1439 |
LPG equipment and accessories - Transportable refillable welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Procedure for checking before, during and after filling |
|
CEN EN 14399-8 |
High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies |
|
CEN EN 14427 |
Transportable refillable fully wrapped composite cylinders for Liquefied Petroleum Gases (LPG) - Design and Construction-Includes amendment A1:2005 |
|
CEN EN 1444 |
Fibre-Cement Pipelines - Guide for Laying and On-Site Work Practices |
|
CEN EN 14451 |
Devices to prevent pollution by backflow of potable water - Inline anti-vacuum valves DN 8 to DN 80 - Family D, type A |
|
CEN EN 14453 |
Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C |
|
CEN EN 1446 |
Plastics Piping and Ducting Systems - Thermoplastics Pipes - Determination of Ring Flexibility |
|
CEN EN 14483-5 |
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems |
|
CEN EN 1452-3 |
Plastics piping systems for water supply Unplasticized poly(vinyl chloride) (PVC-U) Part 3: Fittings |
|
CEN EN 1453-1 |
Plastics Piping Systems with Structured-Wall Pipes for Soil and Waste Discharge (Low and High Temperature) Inside Buildings - Unplasticized Poly(Vinyl Chloride) (PVC-U) - Part 1: Specifications for Pipes and the System |
|
CEN EN 1456-1 |
Plastics Piping Systems for Buried and Above-Ground Drainage and Sewage Under Pressure - Unplasticized Poly(Vinyl Chloride) (PVC-U) - Part 1: Specifications for Piping Components and the System |
|
CEN EN 14596 |
Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve |
|
CEN EN 14705 |
Heat exchangers Method of measurement and evaluation of thermal performances of wet cooling towers |
|
CEN EN 14763 |
LPG equipment and accessories Transportable refillable composite cylinders for Liquefied Petroleum Gas (LPG) Procedure for checking before, during and after filling |
|
CEN EN 14831 |
Fasteners - Tightening performance - Torque/Angle simplified test method |
|
CEN EN 14863 |
Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers |
|
CEN EN 14864 |
Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification-Incorporates Amendment A1: 2007 |
|
CEN EN 14870-2 |
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges |
|
CEN EN 14894 |
LPG equipment and accessories Cylinder and drum marking |
|
CEN EN 1503-2 |
Valves - Materials for Bodies, Bonnets and Covers - Part 2: Steels Other Than Those Specified in European Standards |
|
CEN EN 1503-3 |
Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards-Incorporating corrigendum March 2001 |
|
CEN EN 15048-1 |
Non-preloaded structural bolting assemblies - Part 1: General requirements |
|
CEN EN 15085-3 |
Railway applications - Welding of railway vehicles and components - Part 3: Design requirements |
|
CEN EN 1515-3 |
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated |
|
CEN EN 15159-2 |
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock |
|
CEN EN 15159-3 |
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 3: Thermal shock resistance |
|
CEN EN 1519-1 |
Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Polyethylene (PE) - Part 1: Specifications for Pipes, Fittings and the System |
|
CEN EN 15202 |
LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
|
CEN EN 15206 |
Vitreous and porcelain enamels - Production of specimens for testing enamel on sheet steel, sheet aluminium and cast iron |
|
CEN EN 15207 |
Tanks for transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
|
CEN EN 15266 |
Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
|
CEN EN 1566-1 |
Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Chlorinated Poly(Vinyl Chloride) (PVC-C) - Part 1: Specifications for Pipes, Fittings and the System |
|
CEN EN 1597-3 |
Welding Consumables - Test Methods - Part 3: Testing of Positional Capability of Welding Consumables in a Fillet Weld |
|
CEN EN 1668 |
Welding Consumables - Rods, Wires and Deposits for Tungsten Inert Gas Welding of Non Alloy and Fine Grain Steels - Classification |
|
CEN EN 1680 |
Plastics Piping Systems - Valves for Polyethylene (PE) Piping Systems - Test Method for Leaktightness Under and After Bending Applied to the Operating Mechanism |
|
CEN EN 1765 |
Rubber Hose Assemblies for Oil Suction and Discharge Services - Specification for the Assemblies |
|
CEN EN 1796 |
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
|
CEN EN 1797-1 |
Cryogenic Vessels - Gas/Material Compatibility - Part 1: Oxygen Compatibility-Superseded by EN 1797:2001 |
|
CEN EN 1800 |
Transportable gas cylinders - Acetylene cylinders - Basic requirements, definitions and type testing |
|
CEN EN 1802 |
Transportable Gas Cylinders - Periodic Inspection and Testing of Seamless Aluminium Alloy Gas Cylinders |
|
CEN EN 1916 |
Concrete pipes and fittings, unreinforced, steel fibre and reinforced-Incorporating corrigendum December 2006 |
|
CEN EN 1919 |
Transportable Gas Cylinders - Cylinders for Liquefied Gases (Excluding Acetylene and LPG) - Inspection at Time of Filling-Superseded by EN ISO 2307:2005 |
|
CEN EN 1983 |
Industrial valves - Steel ball valves |
|
CEN EN 20693 |
Dimensions of Seam Welding Wheel Blanks |
|
CEN EN 2162-1 |
Technical Product Documentation - Springs - Part 1 : Simplified Representation (ISO 2162-1 : 1993) |
|
CEN EN 22340 |
Clevis Pins Without Head |
|
CEN EN 225-1 |
Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1: Oil burner pumps |
|
CEN EN 24231 |
Hand- and Machine- Operated Circular Screwing Dies for Parallel Pipe Thread; G Series |
|
CEN EN 27434 |
Slotted Set Screws with Cone Point |
|
CEN EN 27435 |
Slotted Set Screws with Long Dog Point |
|
CEN EN 27931 |
Commercial Propane and Butane - Analysis by Gas Chromatography (ISO 7941:1988) |
|
CEN EN 28430-3 |
Resistance Spot Welding - Electrode Holders - Part 2: Morse Taper Fixing |
|
CEN EN 286-4 |
Simple Unfired Pressure Vessels Designed to Contain Air or Nitrogen - Part 4: Aluminium Alloy Pressure Vessels Designed for Air Braking Equipment and Auxiliary Pneumatic Equipment for Railway Rolling Stock |
|
CEN EN 28659 |
Thermoplastics Valves - Fatigue Strength - Test Method |
|
CEN EN 28662-2 |
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 2: Chipping Hammers and Riveting Hammers-Includes Amendments A1:1995 and A2:2001; ISO 8662-2:1992 |
|
CEN EN 28736 |
Taper Pins with Internal Thread, Unhardened |
|
CEN EN 295-1 |
Vitrified Clay Pipes and Fittings and Pipe Joints for Drains and Sewers - Part 1: Requirements-Includes Amendment A1: 1996, A2: 1996 and A3: 1999 |
|
CEN EN 295-2 |
Vitrified Clay Pipes and Fittings and Pipe Joints for Drains and Sewers Part 2: Quality Control and Sampling-Includes Amendment A1: 1999 |
|
CEN EN 29539 |
Materials for Equipment Used in Gas Welding, Cutting and Allied Processes |
|
CEN EN 307 |
Heat Exchangers - Guidelines to Prepare Installation, Operating and Maintenance Instructions Required to Maintain the Performance of Each Type of Heat Exchanger-Ratified European Text; Supersedes ENV 307:1990 |
|
CEN EN 327 |
Heat Exchangers - Forced Convection Air Cooled Refrigerant Condensers - Test Procedure for Establishing Performance-includes amendment A1:2002 |
|
CENELEC EN 45510-1 |
Guide for Procurement of Power Station Equipment - Part 1: Common Clauses |
|
CENELEC EN 45510-2-4 |
Guide for Procurement of Power Station Equipment - Part 2-4: Electrical Equipment - High Power Static Convertors |
|
CEN EN 45510-5-2 |
Guide for Procurement of Power Station Equipment - Part 5-2: Gas Turbines |
|
CEN EN 45510-6-1 |
Guide for Procurement of Power Station Equipment - Part 6-1: Turbine Auxiliaries - Deaerators |
|
CEN EN 45510-6-2 |
Guide for Procurement of Power Station Equipment - Part 6-2: Turbine Auxiliaries - Feedwater Heaters |
|
CEN EN 489 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
|
CENELEC EN 50068 |
Wrought Steel Enclosures for Gas-Filled High- Voltage Switchgear and Controlgear |
|
CENELEC EN 50085-1 |
Cable trunking systems and cable ducting systems for electrical installations Part 1: General requirements |
|
CENELEC EN 50109-1 |
Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio Frequency Applications Part 1: General Requirements and Tests |
|
CENELEC EN 50122-1 |
Railway applications - Fixed installations Part 1: Protective provisions relating to electrical safety and earthing-Incorporating corrigendum August 2007 |
|
CENELEC EN 50123-7-2 |
Railway applications Fixed installations D.C. switchgear Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems Isolating current transducers and other current measuring devices |
|
CENELEC EN 50124-2 |
Railway Applications - Insulation Coordination Part 2: Overvoltages and Related Protection |
|
CENELEC EN 50143 |
Cables for Signs and Luminous-Discharge-Tube Installations Operating from a No-Load rated Output Voltage Exceeding 1 kV but Not Exceeding 10 kV-Includes amendment A1: 2003 |
|
CENELEC EN 50144-2-2 |
Safety of Hand-Held Electric Motor Operated Tools Part 2-2: Particular Requirements for Screwdrivers and Impact Wrenches-Superseded by EN 60745-2-2: 7/2003 |
|
CENELEC EN 50162 |
Protection against corrosion by stray current from direct current systems |
|
CENELEC EN 50176 |
Automatic Electrostatic Spraying Installations for Flammable Liquid Spraying Material |
|
CENELEC EN 50187 |
Gas-Filled Compartments for a.c. Switchgear and Controlgear for Rated Voltages Above 1 kV and up to and Including 52 kV |
|
CENELEC EN 50216-6 |
Power Transformer and Reactor Fittings Part 6: Cooling Equipment - Removable Radiators for Oil-Immersed Transformers |
|
CENELEC EN 50272-4 |
Safety requirements for secondary batteries and battery installations - Part 4: Batteries for use in portable appliances |
|
CENELEC EN 50290-2-20 |
Communication Cables - Part 2-20: Common Design Rules and Construction - General-Supersedes HD 624.0 S1:1997 |
|
CENELEC EN 50290-2-21 |
Communication Cables - Part 2-21: Common Design Rules and Construction - PVC Insulation Compounds-Incorporates Amendment A1: 2007 |
|
CENELEC EN 50294 |
Measurement Method of Total Input Power of Ballast-Lamp Circuits-Includes Amendments A1:2001 and A2:2003 |
|
CENELEC EN 50363-2-2 |
Insulating, sheathing and covering materials for low voltage energy cables Part 2-2: Cross-linked elastomeric covering compounds |
|
CENELEC EN 50363-4-1 |
Insulating, sheathing and covering materials for low voltage energy cables Part 4-1: PVC sheathing compounds |
|
CENELEC EN 50363-4-2 |
Insulating, sheathing and covering materials for low voltage energy cables Part 4-2: PVC covering compounds |
|
CEN EN 50363-6 |
Insulating, sheathing and covering materials for low voltage energy cables Part 6: Halogen-free, cross-linked sheathing compounds |
|
CENELEC EN 50369 |
Liquid tight sheathing systems for cable management |
|
CENELEC EN 50438 |
Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks |
|
CENELEC EN 50464-2-2 |
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on distribution transformers meeting the requirements of EN 50464-2-1 |
|
CENELEC EN 50464-3 |
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 3: Determination of the power rating of a transformer loaded with non-sinusoidal currents |
|
CEN EN 521 |
Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances |
|
CEN EN 60044-3 |
Instrument transformers Part 3: Combined transformers |
|
CENELEC EN 60079-29-2 |
Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen-Incorporates Corrigendum December 2007 |
|
CENELEC EN 60156 |
Insulating Liquids Determination of the Breakdown Voltage at Power Frequency Test Method (IEC 156 : 1995) |
|
CENELEC EN 60205 |
Calculation of the Effective Parameters of Magnetic Piece Parts-IEC 60205:2006 |
|
CENELEC EN 60255-22-2 |
Electrical Relays - Part 22: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Section 2: Electrostatic Discharge Tests-IEC 255-22-2:1996 |
|
CENELEC EN 60255-22-3 |
Electrical Relays - Part 22-3: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Radiated Electromagnetic Field Disturbance Tests-IEC 60255-22-3: 2000 |
|
CENELEC EN 60255-27 |
Measuring relays and protection equipment Part 27: Product safety requirements-IEC 60255-27:2005 |
|
CENELEC EN 60282-1 |
High-voltage fuses Part 1: Current-limiting fuses-IEC 60282-1: 2005 |
|
CENELEC EN 60289 |
Reactors-Includes Amendment A11:2002; IEC 60289:1988, Modified; Supersedes HD 539.S2:1992 |
|
CENELEC EN 60309-4 |
Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock |
|
CENELEC EN 60398 |
Industrial Electroheating Installations - General Test Methods-Supersedes HD 353 S1:1977; IEC 60398:1999 |
|
CENELEC EN 60404-13 |
Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip |
|
CEN EN 60404-14 |
Magnetic materials Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method-IEC 60404-14: 2002 |
|
CENELEC EN 60454-3-1 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: PVC Film Tapes with Pressure-Sensitive Adhesive-Includes Amendment A1: 2001; IEC 60454-3-1: 1998 + A1: 2001 |
|
CENELEC EN 60454-3-10 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 10: Requirements for Cellulose-Acetate- Butyrate Film Tapes with Rubber Thermosetting Adhesive (IEC 454-3-10 : 1995) |
|
CENELEC EN 60454-3-12 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 12: Polyethylene Film Tapes with Pressure-Sensitive Adhesive-IEC 60454-3-12:1998 |
|
CENELEC EN 60454-3-19 |
Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides-IEC 60454-3-19:2003 |
|
CENELEC EN 60464-1 |
Varnishes used for electrical insulation Part 1: Definitions and general requirements-A1:2006 |
|
CENELEC EN 60507 |
Artificial Pollution Tests on High-Voltage Insulators to Be Used on A.C. Systems (IEC 507 : 1991) |
|
CENELEC EN 60534-3-3 |
Industrial-Process Control Valves Part 3-3: Dimensions - End-to-End Dimensions for Buttweld, Two-Way, Globe-Type, Straight Pattern Control Valves-IEC 60534-3-3:1998 |
|
CENELEC EN 60534-6-1 |
Industrial-Process Control Valves Part 6: Mounting Details for Attachment of Positioners to Control Valves Section 1: Positioner Mounting on Linear Actuators-IEC 60534-6-1: 1997 |
|
CENELEC EN 60534-8-3 |
Industrial-Process Control Valves Part 8-3: Noise Considerations - Control Valve Aerodynamic Noise Prediction Method-IEC 60534-8-3: 2000 |
|
CENELEC EN 60570 |
Electrical supply track systems for luminaires-IEC 60570:2003, modified; Supersedes EN 60570-2-1:1994 + A1:1996 |
|
CENELEC EN 60587 |
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion |
|
CENELEC EN 60684-1 |
Flexible insulating sleeving Part 1: Definitions and general requirements-IEC 60684-1:2003 |
|
CENELEC EN 60684-3-209 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose, flame retarded, shrink ratio 2:1-IEC 60684-3-209:2003; Supersedes HD 523.3.209 S1:1989 |
|
CENELEC EN 60684-3-212 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 212: Heat-shrinkable polyolefin sleevings-IEC 60684-3-212: 2005; Supersedes EN 60684-3-212:1998, EN 60684-3-213:1999, EN 60684-3-217:1998 and EN 60684-3-218:1998 |
|
CENELEC EN 60684-3-216 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving-IEC 60684-3-216: 2001 |
|
CENELEC EN 60706-5 |
Maintainability of equipment - Part 5: Testability and diagnostic testing |
|
CEN EN 60708 |
Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath-IEC 60708: 2005 |
|
CENELEC EN 60745-2-3 |
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders |
|
CENELEC EN 60811-4-2 |
Insulating and sheathing materials of electric and optical cables Common test methods Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stab-IEC 60811-4-2:2004 |
|
CENELEC EN 60848 |
GRAFCET Specification Language for Sequential Function Charts-IEC 60848:2002 |
|
CENELEC EN 60852-4 |
Outline Dimensions of Transformers and Inductors for Use in Telecommunication and Electronic Equipment Part 4: Transformers and Inductors Using YUI-2 Laminations-IEC 852-4: 1996 |
|
CENELEC EN 60885-3 |
Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on lengths of extruded power cables-IEC 60885-3:1988 |
|
CENELEC EN 60889 |
Hard-Drawn Aluminium Wire for Overhead Line Conductors-Supersedes HD 532 S1: 1989; IEC 889: 1987 |
|
CENELEC EN 60893-1 |
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 1: Definitions, designations and general requirements-IEC 60893-1:2004 |
|
CENELEC EN 60893-3-6 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6: Specifications for individual materials Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003) |
|
CENELEC EN 60893-3-7 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-7: Specifications for individual materials Requirements for rigid laminated sheets based on polyimide resins-IEC 60893-3-7:2003 |
|
CENELEC EN 60895 |
Live working Conductive clothing for use at nominal voltage up to 800 kV a.c. and 600 kV d.c.-IEC 60895:2002 + corrigendum 2003, modified |
|
CENELEC EN 60901 |
Single-Capped Fluorescent Lamps - Performance Specifications-Includes Amendments A1: 1997 and A2:2000; IEC 60901:1996 + A1:1997 + A2:2000 |
|
CENELEC EN 60904-10 |
Photovoltaic Devices Part 10: Methods of Linearity Measurement-IEC 60904-10: 1998 |
|
CENELEC EN 60904-8 |
Photovoltaic Devices Part 8: Measurement of Spectral Response of a Photovoltaic (PV) Device-IEC 60904-8: 1998 |
|
CENELEC EN 60924 |
D.C. Supplied Electronic Ballasts for Tubular Fluorescent Lamps General and Safety Requirements (IEC 924/A1:1993)-A1: March 1994; Partly superseded by EN 61347-2-4: 2001, EN 61347-2-5: 2001, EN 61347-2-7: 2001 also EN 61347-2-6: 2001 |
|
CENELEC EN 60929 |
AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements-Incorporates corrigendum: December 2006 |
|
CENELEC EN 60938-1 |
Fixed inductors for electromagnetic interference suppression Part 1: Generic specification-Incorporating Amendment A1: 02/2007 |
|
CENELEC EN 60969 |
Self-Ballasted Lamps for General Lighting Services - Performance Requirements-Includes Amendments A1:1993 and A2:2000; IEC 60969:1988 + A2:2000 |
|
CENELEC EN 60974-12 |
Arc welding equipment Part 12: Coupling devices for welding cables-IEC 60974-12: 2005 |
|
CENELEC EN 60974-6 |
Arc welding equipment Part 6: Limited duty manual metal arc welding power sources-Incorporates Corrigendum May 2005; IEC 60974-6: 2003;:1989 |
|
CENELEC EN 61029-2-9 |
Safety of transportable motor-operated electric tools Part 2-9: Particular requirements for mitre saws-IEC 61029-2-9:1995, modified |
|
CENELEC EN 61046 |
D.C. or a.c. Supplied Electronic Step-Down Convertors for Filament Lamps - General and Safety Requirements (Includes Amendment A1 : 1996) (IEC 1046 : 1993 + A1 : 1995)-Superseded by EN 61347-2-2: 2001 |
|
CENELEC EN 61048 |
Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements-IEC 61048:2006 |
|
CENELEC EN 61058-2-5 |
Switches for appliances Part 2-5: Particular requirements for change-over selectors-Includes amendment A11: 2002; IEC 1058-2-5: 1994 |
|
CENELEC EN 61061-1 |
Non-Impregnated Densified Laminated Wood for Electrical Purposes Part 1: Definitions, Designations and General Requirements |
|
CENELEC EN 61074 |
Determination of Heats and Temperatures of Melting and Crystallization of Electrical Insulating Materials by Differential Scanning Calorimetry (IEC 1074 : 1991) |
|
CENELEC EN 61138 |
Cables for portable earthing and short-circuiting equipment |
|
CENELEC EN 61158-4 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems Part 4: Data link protocol specification-IEC 61158-4:2003 + corrigendum 2004; Partially supersedes EN 50170:1996 + A1:2002 + A2:1999 + A3:2002 and EN 50254:1998 |
|
CENELEC EN 61158-5 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems Part 5: Application layer service definition-IEC 61158-5:2003 + corrigendum 2004; Partially supersedes EN 50170:1996 + A1:2002 + A2:1999 + A3:2002 and EN 50254:1998 |
|
CENELEC EN 61165 |
Application of Markov techniques |
|
CENELEC EN 61204-6 |
Low-Voltage Power Supplies, DC Output Part 6: Requirements for Low-Voltage Power Supplies of Assessed Performance-IEC 61204-6:2000 |
|
CENELEC EN 61248-4 |
Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 4: Sectional Specification for Power Transformers for Switched Mode Power Supplies (SMPS) on the Basis of the Capability Approval Procedure-IEC 61248-4: 1996 |
|
CENELEC EN 61334-6 |
Distribution Automation Using Distribution Line Carrier Systems Part 6: A-XDR Encoding Rule-IEC 61334-6:2000 |
|
CENELEC EN 61378-2 |
Convertor Transformers Part 2: Transformers for HVDC Applications-IEC 61378-2:2001 |
|
CENELEC EN 61386-21 |
Conduit systems for cable management Part 21: Particular requirements Rigid conduit systems-Incorporates Corrigendum April 2004; |
|
CENELEC EN 61400-25-2 |
Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models |
|
CENELEC EN 61427 |
Secondary Cells and Batteries for Solar Photovoltaic Energy Systems - General Requirements and Methods of Test-IEC 61427:1999 |
|
CENELEC EN 61436 |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Sealed Nickel-Metal Hydride Rechargeable Single Cells-IEC 61436:1998; Superseded by EN 61951-2: 2003 |
|
CENELEC EN 61442 |
Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)-IEC 61442:2005, modified |
|
CENELEC EN 61482-1-2 |
Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test) |
|
CENELEC EN 61549 |
Miscellaneous Lamps-Amendment A1: March 2005; IEC 61549: 2003 |
|
CENELEC EN 61588-2-12 |
Safety of Power Transformers, Power Supply Units and Similar Part 2-17: Particular Requirements for Transformers for Switch Mode Power Supplies-Ratified European Text; IEC 61558-2-17: 1997 |
|
CENELEC EN 61619 |
Insulating Liquids - Contamination by Polychlorinated Biphenyls (PCBs) Method of Determination by Capillary Column Gas Chromatography-IEC 61 619: 1997 |
|
CENELEC EN 61726 |
Cable Assemblies, Cables, Connectors and Passive Microwave Components Screening Attenuation Measurement by the Reverberation Chamber Method-IEC 61726: 1999 |
|
CENELEC EN 61788-13 |
Superconductivity Part 13: AC loss measurements Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites-IEC 61788-13:2003 |
|
CENELEC EN 61811-11 |
Electromechanical elementary relays of assessed quality Part 11: Blank detail specification Relays for industrial application-IEC 61811-11:2002 |
|
CENELEC EN 61987-1 |
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
|
CENELEC EN 62011-3-1 |
Insulating materials - Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes Part 3-1: Specifications for individual materials - Tubes and rods of rectangular and hexagonal cross-section-IEC 62011-3-1:2003 |
|
CENELEC EN 62021-2 |
Insulating liquids - Determination of acidity - Part 2: Colourimetric titration |
|
CENELEC EN 62114 |
Electrical insulation systems (EIS) - Thermal classification (IEC 62114:2001) |
|
CENELEC EN 62193 |
Live working Telescopic sticks and telescopic measuring sticks-IEC 62193:2003 |
|
CENELEC EN 62230 |
Electric cables - Spark-test method |
|
CENELEC EN 62237 |
Live working Insulating hoses with fittings for use with hydraulic tools and equipment-IEC 62237:2003, modified |
|
CEN EN 62271-107 |
High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV (IEC 62271-107:2005) |
|
CEN EN 62271-108 |
High-voltage switchgear and controlgear Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above-(IEC 62271-108:2005) |
|
CENELEC EN 62271-2 |
High-voltage switchgear and controlgear Part 2: Seismic qualification for rated voltages of 72,5 kV and above-IEC 62271-2:2003 |
|
CEN EN 62271-201 |
High-voltage switchgear and controlgear Part 201: AC insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV-Incorporates Corrigendum November 2006 |
|
CENELEC EN 62271-203 |
High-voltage switchgear and controlgear Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV-IEC 62271-203:2003; Supersedes EN 60517:1996 + A11:1999 |