|
CENELEC EN 60079-0 |
Electrical apparatus for explosive gas atmospheres Part 0: General requirements-IEC 60079-0:2004 |
|
CENELEC EN 60204-1 |
Safety of Machinery - Electrical Equipment of Machines Part 1: General Requirements-IEC 60204-1:2005, modified |
|
CEN EN ISO 898-1 |
Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 1: Bolts, Screws and Studs-ISO 898-1:1999; Supersedes EN 20898-1: 1991 |
|
CENELEC EN 60529 |
Degrees of Protection Provided by Enclosures (IP Code)-Includes Amendment 1: 02/2000; Supersedes HD 365 S3: 1985; IEC 60529: 1989 + A1: 1999 |
|
CENELEC EN 60079-15 |
Electrical apparatus for explosive gas atmospheres Part 15: Construction, test and marking of type of protection |
|
CENELEC EN 60079-7 |
Electrical apparatus for explosive gas atmospheres Part 7: Increased safety |
|
CENELEC EN 61326-1 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 1: General requirements-IEC 61326-1:2005;:1997 |
|
CENELEC EN 60079-11 |
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety |
|
CENELEC EN 61000-4-2 |
Electromagnetic Compatibility (EMC) - Part 4.2: Testing and Measurement Techniques - Electrostatic Discharge Immunity Test-Includes Amendments A1:1998 and A2:2001; IEC 61000-4-2:1995 + A1:1998 + A2:2000 |
|
CENELEC EN 60947-1 |
Low-voltage switchgear and controlgear Part 1: General rules |
|
CENELEC EN 50014 |
Electrical Apparatus for Potentially Explosive Atmospheres General Requirements-Includes Amendments A1:1999 and A2:1999; Incorporates Corrigenda September 1997 and April 1998; SUPERSEDED BY EN 60079-0:2004 |
|
CENELEC EN 60664-1 |
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
|
CEN EN ISO 4014 |
Hexagon Head Bolts - Product Grades A and B-ISO 4014:1999; Supersedes EN 24014:1991 |
|
CENELEC EN 61000-3-3 |
Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 3: Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public Low-Voltage Supply Systems, for Equipment with Rated Current Less Than or Equal to 16 A per Phase and Not Subject to Conditional Connection-Includes Amendment A1: 2001, Amendment A2: 2006; Supersedes EN 60555-3: 1987 and Its Amendment (Includes Corrigendum July 1997) |
|
CENELEC EN 60079-26 |
Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga |
|
CENELEC EN 60598-1 |
Luminaires Part 1: General requirements and tests-Incorporating corrigendum August 2007; Incorporating Amendment A1: 2006 |
|
CENELEC EN 61800-3 |
Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods-IEC 61800-3:2004 |
|
CEN EN ISO 4017 |
Hexagon Head Screws - Product Grades A and B-ISO 4017:1999; Supersedes 24017:1991 |
|
CEN EN ISO 4042 |
Fasteners - Electroplated Coatings-ISO 4042: 1999 |
|
CEN EN ISO 3506-1 |
Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 1: Bolts, Screws and Studs-ISO 3506-1: 1997 |
|
CEN EN 20898-2 |
Mechanical Properties of Fasteners - Part 2: Nuts with Specified Proof Load Values - Coarse Thread (ISO 898-2 : 1992) |
|
CENELEC HD 21.1 S2/A16 |
AMD 16 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements |
|
CENELEC EN 60439-1 |
Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies-Includes Amendment A1: 2004; Incorporating Corrigendum NO. 1; IEC 60439-1:1999 + A1: 2004 |
|
CENELEC EN 60320-1 |
Appliance Couplers for Household and Similar General Purposes Part 1: General Requirements-IEC 60320-1:2001 |
|
CEN EN ISO 6149-1 |
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal |
|
CENELEC EN 60695-10-2 |
Fire hazard testing Part 10-2: Abnormal heat - Ball pressure test-IEC 60695-10-2:2003 |
|
CENELEC EN 60947-5-1 |
Low-Voltage Switchgear and Controlgear Part 5-1: Control Circuit Devices and Switching Elements Electromechanical Control Circuit Devices-IEC 60947-5-1:2003; Incorporates Corrigendum November 2004 |
|
CENELEC EN 60695-2-11 |
Fire Hazard Testing Part 2-11: Glowing/Hot-Wire Based Test Methods - Glow-Wire Flammability Test Method for End-Products-IEC 60695-2-11:2000; Supersedes EN 60695-2-1/1:1996 |
|
CEN EN 287-1 |
Qualification test of welders - Fusion welding - Part 1: Steels-Incorporating Corrigendum August 2004; Includes Amendment A2:2006 |
|
CENELEC EN 60947-4-1 |
Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters-Amendment A1: December 2002; A2: September 2005; IEC 60947-4-1: 2000 |
|
CEN EN ISO 5817 |
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections |
|
CENELEC EN 61058-1 |
Switches for Appliances Part 1: General Requirements-IEC 61058-1: 2000 + A1: 2001, Modified |
|
CENELEC EN 61508-1 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems Part 1: General Requirements-IEC 61508-1: 1998 + Corrigendum 1999 |
|
CEN EN ISO 8752 |
Spring-Type Straight Pins - Slotted, Heavy Duty-ISO 8752:1997; Supersedes EN 28752:1993 |
|
CENELEC EN 60079-2 |
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure |
|
CEN EN ISO 4762 |
Hexagon socket head cap screws-ISO 4762:2004 |
|
CENELEC EN 60034-1 |
Rotating electrical machines Part 1: Rating and performance-IEC 60034-1:2004 |
|
CENELEC EN 50281-1-1 |
Electrical apparatus for use in the presence of combustible dust Part 1-1: Electrical apparatus protected by enclosures Construction and testing-Includes amendment A1: 2002; Includes Corrigendum August 1999 |
|
CENELEC EN 50130-4 |
Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems-Includes amendments A1:1998 and A2:2003; Incorporating corrigendum March 2003 |
|
CENELEC EN 61241-1 |
Electrical apparatus for use in the presence of combustible dust Part 1: Protection by enclosures |
|
CENELEC EN 60947-7-1 |
Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment Terminal blocks for copper conductors-IEC 60947-7-1:2002 |
|
CENELEC EN 60112 |
Method for the determination of the proof and the comparative tracking indices of solid insulating materials-IEC 60112:2003; Supersedes HD 214 S2:1980; Incorporating Corrigendum June 2003 |
|
CENELEC EN 61496-1 |
Safety of Machinery - Electro-Sensitive Protective Equipment Part 1: General Requirements and Tests-IEC 61496-1:2004, modified |
|
CENELEC EN 60079-14 |
Electrical Apparatus for Explosive Gas Atmospheres Part 14: Electrical Installations in Hazardous Areas (Other than Mines)-IEC 60079-14: 2002 |
|
CENELEC EN 61508-2 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems Part 2: Requirements for Electrical/Electronic/Programmable Electronic Safety-Related Systems-IEC 61508-2: 2000 |
|
CEN EN ISO 6149-2 |
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
|
CENELEC EN 60812 |
Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
|
CEN EN 1993-4-3 |
Eurocode 3 - Design of steel structures - Part 4-3: Pipelines |
|
CEN EN 440 |
Welding Consumables - Wire Electrodes and Deposits for Gas Shielded Metal Arc Welding of Non Alloy and Fine Grain Steels - Classification |
|
CENELEC EN 50178 |
Electronic Equipment for Use in Power Installations-Incorporating Corrugendum N0.1 |
|
CEN EN 60079-25 |
Electrical apparatus for explosive gas atmospheres Part 25: Intrinsically safe systems-Incorporates Corrigendum April 2006; (IEC 60079-25:2003) |
|
CENELEC EN 60947-2 |
Low-voltage switchgear and controlgear Part 2: Circuit-breakers-IEC 60947-2:2006 |
|
CENELEC EN 60335-2-41 |
Household and similar electrical appliances - Safety Part 2-41: Particular requirements for pumps-Includes amendment A1:2004; IEC 60335-2-41:2002 + A1:2004 |
|
CEN EN ISO 4032 |
Hexagon Nuts, Style 1 - Product Grades A and B-ISO 4032:1999; Supersedes EN 24032:1991 |
|
CEN EN ISO 13920 |
Welding - General Tolerances for Welded Constructions - Dimensions for Lengths and Angles - Shape and Position-ISO 13920: 1996 |
|
CEN EN ISO 6149-3 |
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
|
CEN EN ISO 7089 |
Plain Washers - Normal Series - Product Grade A-ISO 7089:2000 |
|
CENELEC EN 60034-5 |
Rotating Electrical Machines Part 5: Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code) - Classification-includes Amd A1: 1/2007; IEC 60034-5:2000 |
|
CEN EN 982 |
Safety of Machinery - Safety Requirements for Fluid Power Systems and Their Components - Hydraulics |
|
CENELEC EN 61326-2-3 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning-IEC 61326-2-3:2006 |
|
CENELEC EN 61131-2 |
Programmable controllers - Part 2: Equipment requirements and tests |
|
CENELEC EN 61810-1 |
Electromechanical elementary relays Part 1: General and safety requirements-IEC 61810-1:2003; Supersedes EN 61810-1:1998 and EN 61810-5:1998 |
|
CEN EN ISO 4759-1 |
Tolerances for Fasteners - Part 1: Bolts, Screws, Studs and Nuts - Product Grades A, B and C-ISO 4759-1:2000 |
|
CEN EN 10217-7 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
|
CENELEC EN 60695-2-12 |
Fire Hazard Testing Part 2-12: Glowing/Hot-Wire Based Test Methods - Glow-Wire Flammability Test Method for Materials-IEC 60695-2-12:2000; Supersedes EN 60695-2-1/2:1996 |
|
CENELEC EN 60745-1 |
Hand-held motor-operated electric tools - Safety Part 1: General requirements |
|
CEN EN 1012-1 |
Compressors and Vacuum Pumps - Safety Requirements - Part 1: Compressors |
|
CENELEC EN 60695-2-10 |
Fire Hazard Testing Part 2-10: Glowing/Hot-Wire Based Test Methods - Glow-Wire Apparatus and Common Test Procedure-IEC 60695-2-10:2000; Supersedes EN 60695-2-1/0:1996 |
|
CENELEC EN 61140 |
Protection Against Electric Shock - Common Aspects for Installation and Equipment-IEC 61140: 2001 |
|
CENELEC EN 60079-10 |
Electrical Apparatus for Explosive Gas Atmospheres Part 10: Classification of Hazardous Areas-IEC 60079-10:2002 |
|
CENELEC EN 61508-3 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems Part 3: Software Requirements-IEC 61508-3: 1998 + Corrigendum 1999 |
|
CENELEC EN 61326-2-6 |
Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-6: Particular requirements In vitro diagnostic (IVD) medical equipment-IEC 61326-2-6:2005; Supersedes EN 61326:1997 + A1:1998 + A2:2001 + A3:2003 |
|
CENELEC EN 62061 |
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems-Incorporating Corrigendum July 2005; IEC 62061:2005 |
|
CENELEC EN 60034-14 |
Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity-Incorporates Amendment A1: June 2007 |
|
CEN EN 854 |
Rubber Hoses and Hose Assemblies - Textile Reinforced Hydraulic Type - Specification |
|
CEN EN ISO 15607 |
Specification and qualification of welding procedures for metallic materials - General rules-ISO 15607: 2003 |
|
CENELEC HD 22.2 S2/A11 |
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods |
|
CENELEC EN 60335-2-40 |
Household and similar electrical appliances - Safety Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers-Includes Amendments A11:2004, A12:2005 and A1:2006; IEC 60335-2-40:2002 + A1:2005, + A2:2005, modified |
|
CEN EN 1665 |
Hexagon Bolts with Flange - Heavy Series-Incorporates Corrigendum March 1998 and February 2007 |
|
CENELEC EN 61310-1 |
Safety of Machinery Indication, Marking and Actuation Part 1: Requirements for Visual, Auditory and Tactile Signals (IEC 1310-1 : 1995) |
|
CENELEC EN 61326/A3 |
Electrical equipment for measurement, control and laboratory use - EMC requirements-Annexes E & F of IEC 61326:2002 + corrigendum 2002; Ratified European Text |
|
CENELEC EN 61800-1 |
Adjustable Speed Electrical Power Drive Systems Part 1: General Requirements Rating Specifications for Low Voltage Adjustable Speed D.C. Power Drive Systems-IEC 61800-1:1997 |
|
CENELEC EN 62040-2 |
Uninterruptible power systems (UPS) Part 2: Electromagnetic compatibility (EMC) requirements-Incorporating corrigendum November 2006 |
|
CENELEC EN 60309-1 |
Plugs, Socket-Outlets and Couplers for Industrial Purposes Part 1: General Requirements-Incorporating Amendment A11: May 2004 and Amendment A1: April 2007 |
|
CENELEC EN 60947-5-5 |
Low-Voltage Switchgear and Controlgear Part 5-5: Control Circuit Devices and Switching Elements Electrical Emergency Stop Devices with Mechanical Latching Function-IEC 60947-5-5:1997; A1: April 2005 |
|
CENELEC EN 61508-7 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems Part 7: Overview of Techniques and Measures-IEC 61508-7:2000 |
|
CEN EN 970 |
Non-Destructive Examination of Fusion Welds - Visual Examination |
|
CEN EN ISO 898-5 |
Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 5: Set Screws and Similar Threaded Fasteners Not under Tensile Stresses-ISO 898-5:1998 |
|
CEN CEN ISO/TR 15608 |
Welding - Guidelines for a metallic materials grouping system-(ISO/TR 15608:2005) |
|
CENELEC EN 61779-1 |
Electrical Apparatus for the Detection and Measurement of Flammable Gasesm Part 1: General Requirements and Test Methods-IEC 61779-1:1998 Modified; Includes Amendment A11:2004 |
|
CENELEC EN 60085 |
Electrical insulation - Thermal classification-IEC 60085:2004; Supersedes HD 566 S1:1990 |
|
CENELEC EN 60127-2 |
Miniature fuses Part 2: Cartridge fuse-links-Including Amendment A1; 2003, IEC 60127-2; 2003 + A1: 2003, modified |
|
CENELEC EN 61508-4 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems Part 4: Definitions and Abbreviations-IEC 61508-4: 1998 + Corrigendum 1999 |
|
CEN EN ISO 15848-1 |
Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 1: Classification system and qualification procedures for type testing of valves-ISO 15848-1:2006 |
|
CEN EN ISO 6520-1 |
Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding |
|
CEN EN 10216-1 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties-Includes Amendment A1:2004 |
|
CENELEC EN 50075 |
Flat Non-Wirable Two-Pole Plugs, 2,5 A 250 V, with Cord, for the Connection of Class II-Equipment for Household and Similar Purposes-Incorporating Corrigendum No. 1 |
|
CENELEC EN 50160 |
Voltage characteristics of electricity supplied by public distribution networks |
|
CENELEC EN 60695-11-10 |
Fire hazard testing Part 11-10: Test flames 50 W horizontal and vertical flame test methods-Includes amendment A1:2003; IEC 60695-11-10:1999 + A1:2003; Partly supersedes HD 441 S1:1983 |
|
CENELEC EN 61508-5 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems Part 5: Examples of Methods for the Determination of Safety Integrity Levels-IEC 61508-5: 1998 + Corrigendum 1999 |
|
CEN EN 1435 |
Non-destructive testing of welds Radiographic testing of welded joints-Includes amendments A1:2002 and A2:2003 |
|
CENELEC EN 61558-2-6 |
Safety of Power Transformers, Power Supply Units and Similar Part 2-6: Particular Requirements for Safety Isolating Transformers for General Use-Partly Supersedes EN 60742: 1995; IEC 61558-2-6: 1997 |
|
CENELEC EN 61800-5-1 |
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy |
|
CEN EN 12329 |
Corrosion Protection of Metals - Electrodeposited Coatings of Zinc with Supplementary Treatment on Iron or Steel |
|
CEN EN 288-3 |
Specification and Approval of Welding Procedures for Metallic Materials - Part 3: Welding Procedure Tests for the Arc Welding of Steels-Includes Amendment A1: 1997 |
|
CENELEC EN 50019 |
Electrical Apparatus for Potentially Explosive Atmospheres Increased Safety |
|
CENELEC EN 60617-2 |
Graphical Symbols for Diagrams Part 2: Symbol Elements, Qualifying Symbols and Other Symbols Having General Application-IEC 617-2: 1996 |
|
CEN EN 853 |
Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification-Incorporating corrigendum June 2007 |
|
CENELEC EN 60669-1 |
Switches for household and similar fixed-electrical installations - Part 1: General requirements-includes amendment A1: 2002; Incorporating corrigendum: January 2007 |
|
CEN EN 13445-1 |
Unfired Pressure Vessels - Part 1: General |
|
CEN EN ISO 4063 |
Welding and Allied Processes - Nomenclature of Processes and Reference Numbers-Supersedes EN 24063: 1992; ISO 4063: 1998 |
|
CEN EN 1092-1 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
|
CEN EN 13445-2 |
Unfired pressure vessels - Part 2: Materials |
|
CEN EN 857 |
Rubber Hoses and Hose Assemblies - Wire Braid Reinforced Compact Type for Hydraulic Applications - Specification |
|
CEN EN ISO 10664 |
Hexalobular Internal Driving Feature for Bolts and Screws-ISO 10664:2005;:1999 |
|
CEN EN ISO 7380 |
Hexagon Socket Button Head Screws-ISO 7380:2004 |
|
CEN EN ISO 8734 |
Parallel Pins, of Hardened Steel or Martensitic Stainless Steel (Dowel Pins)-ISO 8734:1997; Supersedes EN 28734:1992 |
|
CENELEC HD 21.5 S2/ A4 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 5: Flexible Cables (Cords) |
|
CENELEC EN 62133 |
Secondary cells and batteries containing alkaline or other non-acid elecrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications-IEC 62134-1: 2002; Supersedes EN 61809: 2000; Partially Supersedes EN 61960-1: 2001 and EN 61960-2: 2001 |
|
CEN EN ISO 3834-2 |
Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements-ISO 3834-2:2005; Supersedes EN 729-2:1994 |
|
CEN EN ISO 8434-1 |
Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors |
|
CEN EN 13445-5 |
Unfired pressure vessels - Part 5: Inspection and testing |
|
CEN EN ISO 15614-1 |
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys-ISO 15614-1:2004 |
|
CEN EN ISO 9974-1 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports-ISO 9974-1: 1996 |
|
CEN EN 10216-5 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
|
CEN EN 13445-3 |
Unfired pressure vessels - Part 3: Design |
|
CENELEC EN 50021 |
Electrical Apparatus for Potentially Explosive Atmospheres - Type of Protection |
|
CENELEC EN 50423-3 |
Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV Part 3: Set of National Normative Aspects-Incorporating Corrigendum April 2005 |
|
CENELEC EN 60079-27 |
Electrical apparatus for explosive gas atmospheres Part 27: Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO)-IEC 60079-27:2005 |
|
CEN EN ISO 3506-2 |
Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 2: Nuts-ISO 3506-2: 1997 |
|
CEN EN 12517-1 |
Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels-:1998 |
|
CENELEC EN 60079-17 |
Electrical apparatus for explosive gas atmospheres Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)-IEC 60079-17:2002 |
|
CEN EN ISO 14583 |
Hexalobular Socket Pan Head Screws-ISO 14583: 2001; Incorporating Technical Corrigendum October 2004 |
|
CEN EN 1011-1 |
Welding Recommendations for welding of metallic materials Part 1: General guidance for arc welding-Includes amendments A1:2002 and A2:2003 |
|
CEN EN 13445-4 |
Unfired pressure vessels - Part 4: Fabrication |
|
CENELEC EN 50016 |
Electrical Apparatus for Potentially Explosive Atmospheres - Pressurized Apparatus |
|
CENELEC EN 60617-7 |
Graphical Symbols for Diagrams Part 7: Switchgear, Controlgear and Protective Devices-IEC 617-7: 1996 |
|
CENELEC EN 60695-11-5 |
Fire hazard testing Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance-IEC 60695-11-5:2004 |
|
CENELEC EN 60695-2-13 |
Fire Hazard Testing Part 2-13: Glowing Hot-Wire Based Test Methods - Glow-Wire Ignitability Test Method for Materials-IEC 60695-2-13:2000; Supersedes EN 690695-2-1/3:1996 |
|
CENELEC EN 60950-22 |
Information technology equipment - Safety Part 22: Equipment installed outdoors-IEC 60950-22:2005 |
|
CEN EN ISO 898-6 |
Mechanical Properties of Fasteners - Part 6: Nuts with Specified Proof Load Values - Fine Pitch Thread (ISO 898-6 : 1994) |
|
CEN EN 1369 |
Founding - Magnetic Particle Inspection |
|
CENELEC EN 60598-2-1 |
Luminaires Part 2: Particular Requirements Section One - Fixed General Purpose Luminaires |
|
CENELEC EN 60598-2-18 |
Luminaires Part 2: Particular Requirements Section 2.18: Luminaires for Swimming Pools and Similar Applications-IEC 598-2-18: 1993, Modified |
|
CENELEC EN 61241-4 |
Electrical apparatus for use in the presence of combustible dust Part 4: Type of protection |
|
CENELEC EN 60127-1 |
Miniature fuses Part 1: Definitions for miniature fuses and general requirements for minature fuse-links |
|
CENELEC EN 61204-7 |
Low voltage power supplies, d.c. output Part 7: Safety requirements-IEC 61204-7:2006 |
|
CEN EN ISO 15848-2 |
Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves-ISO 15848-2:2006 |
|
CEN EN 1043-1 |
Destructive Tests on Welds in Metallic Materials - Hardness Testing - Part 1: Hardness Test on Arc Welded Joints |
|
CENELEC EN 61347-2-8 |
Lamp controlgear Part 2-8: Particular requirements for ballasts for fluorescent lamps-Incorporating Corrigendum July 2003; Includes Amendment A1: 02/2006;: 1991 |
|
CEN EN 12601 |
Reciprocating Internal Combustion Engine Driven Generating Sets - Safety |
|
CEN EN 1290 |
Non-destructive examination of welds Magnetic particle examination of welds-Includes Amendment A1: 2002 and A2:2003 |
|
CEN EN 775 |
Manipulating Industrial Robots - Safety; (ISO 10218:1992 Modified) |
|
CEN EN 1993-4-2 |
Eurocode 3 - Design of steel structures - Part 4-2: Tanks |
|
CENELEC EN 50303 |
Group I, Category M1 Equipment Intended to Remain Functional in Atmospheres Endangered by Firedamp and/or Coal Dust |
|
CENELEC EN 60034-3 |
Rotating electrical machines Part 3: Specific requirements for cylindrical rotor synchronous machines-IEC 60034-3:2005 |
|
CENELEC EN 60998-1 |
Connecting devices for low-voltage circuits for household and similar purposes Part 1: General requirements-IEC 60998-1:2002, modified |
|
CENELEC EN 61131-1 |
Programmable controllers Part 1 : General information-IEC 61131-1:2003 |
|
CENELEC EN 62305-1 |
Protection against lightning Part 1: General principles-IEC 62305-1:2006 |
|
CEN EN 693 |
Machine Tools - Safety - Hydraulic Presses |
|
CEN EN ISO 1127 |
Stainless Steel Tubes - Dimensions, Tolerances and Conventional Masses Per Unit Length-ISO 1127: 1992 |
|
CEN EN ISO 15609-1 |
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding-ISO 15609-1:2004; Supersedes EN 288-2:1992 |
|
CEN EN 13445-6 |
Unfired Pressure Vessels - Part 6: Requirements for the Design and Fabrication of Pressure Vessels and Pressure Parts Constructed from Spheroidal Graphite Cast Iron-Includes Amendment A1:2004 |
|
CEN EN 286-1 |
Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes-Incorporating Corrigendum July 2002; Incorporates Amendment A1:July 2002 and Amendment A2: October 2005 |
|
CENELEC EN 50017 |
Electrical Apparatus for Potentially Explosive Atmospheres - Powder Filling |
|
CENELEC EN 60335-2-45 |
Household and similar electrical appliances - Safety Part 2-45: Particular requirements for portable heating tools and similar appliances-IEC 60335-2-45:2002; |
|
CENELEC EN 60664-4 |
Insulation coordination for equipment within low-voltage systems Part 4: Consideration of high-frequency voltage stress-Incorporating Corrigendum October 2006; IEC 60664-4:2005 |
|
CENELEC EN 61082-1 |
Preparation of documents used in electrotechnology Part 1: Rules-IEC 61082-1:2006; Supersedes EN 61082-2:1994, EN 61082-3:1994 and EN 61082-4:1996 |
|
CENELEC EN 60204-1/ A1 |
AMD 1 Electrical Equipment of Industrial Machines - Part 1: General Requirements; |
|
CENELEC EN 60664-3 |
Insulation coordination for equipment within low-voltage systems Part 3: Use of coating, potting or moulding for protection against pollution-IEC 60664-3:2003 |
|
CENELEC EN 61508-6 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems Part 6: Guidelines on the Application of IEC 61508-2 and IEC 61508-3-IEC 61508-6: 2000 |
|
CEN EN ISO 4035 |
Hexagon Thin Nuts (Chamfered) - Product Grades A and B-Supersedes EN 24035: 1991; ISO 4035: 1999 |
|
CEN EN ISO 7040 |
Prevailing Torque Type Hexagon Nuts (with Non-Metallic Insert), Style 1 - Property Classes 5, 8 and 10-ISO 7040:1997 |
|
CEN EN 10216-2 |
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties-Incorporates Amendment A2: August 2007 |
|
CEN EN 13237 |
Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
|
CEN EN 14015 |
Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
|
CEN EN 1822-1 |
High Efficiency Air Filters (HEPA and ULPA) - Part 1: Classification, Performance Testing, Marking |
|
CENELEC EN 60034-2 |
Rotating Electrical Machines Part 2: Methods for Determining Losses and Efficiency of Rotating Electrical Machinery from Tests (Excluding Machines for Traction Vehicles)-Includes A1 and A2: November 1996; IEC 34-2:1972 + IEC 34-2A:1974 + A1:1995 + A2:1996; Supersedes HD 53.2 S1:1974 |
|
CENELEC EN 60073 |
Basic and Safety Principles for Man-Machine Interface, Marking and Identification - Coding Principles for Indication Devices and Actuators-IEC 60073: 2002 |
|
CENELEC EN 60076-1 |
Power transformers Part 1: General-Includes Amendments A11:1997, A1:2000 and A12:2002; IEC 60076-1:1993 + A1:1999 |
|
CENELEC EN 60146-1-1 |
Semiconductor Convertors General Requirements and Line Commutated Convertors Part 1-1: Specifications of Basic Requirements-IEC 60146-1-1: 1991 Including A1: 1996; Partly Superseded EN 50328:2003 |
|
CENELEC EN 60947-4-3 |
Low-Voltage Switchgear and Controlgear Part 4.3: Contactors and Motor-Starters AC Semiconductor Controllers and Contactors for Non-Motor Loads-Incorproates Amendment A1: December 2006 |
|
CENELEC EN 61558-2-4 |
Safety of Power Transformers, Power Supply Units and Similar Part 2-4: Particular Requirements for Isolating Transformers for General Use-Partly Supersedes EN 60742: 1995; IEC 61558-2-4: 1997 |
|
CENELEC EN 61643-11 |
Low-Voltage Surge Protective Devices Part 11: Surge Protective Devices Connected to Low-Voltage Power Systems - Requirements and Tests-Incorporates amendment A11: 1/2007 |
|
CEN EN 983 |
Safety of Machinery - Safety Requirements for Fluid Power Systems and Their Components - Pneumatics |
|
CEN EN ISO 3506-3 |
Mechanical Properties of Corrosion-Resistant Stainless-Steel Fasteners - Part 3: Set Screws and Similar Fasteners Not Under Tensile Stress-ISO 3506-3: 1997 |
|
CEN EN ISO 4033 |
Hexagon Nuts, Style 2 - Product Grades A and B-ISO 4033:1999; Supersedes EN 24033:1991 |
|
CEN EN ISO 7094 |
Plain Washers - Extra Large Series - Product Grade C-ISO 7094:2000 |
|
CENELEC EN 60034-22 |
Rotating Electrical Machines Part 22: AC Generators for Reciprocating Internal Combustion (RIC) Engine Driven Generating Sets-IEC 34-22:1996 |
|
CENELEC EN 60034-7 |
Rotating Electrical Machines - Part 7: Classification of Types of Construction, Mounting Arrangements and Twerminal Box Position (IM Code)-Includes Amendment A1:2001; IEC 60034-7:1992; Supersedes HD 53.7 S1 : 1974 |
|
CENELEC EN 60799 |
Electrical Accessories Cord Sets and Interconnection Cord Sets-IEC 60799:1998; Supersedes EN 60799:1987 + A1:1994 |
|
CENELEC EN 61326-2-1 |
Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-1: Particular requirements Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications-IEC 61326-2-1:2005; Supersedes EN 61326:1997 + A1:1998 + A2:2001 + A3:2003 |
|
CENELEC EN 61347-1 |
Lamp controlgear Part 1: General and safety requirements-IEC 61347-1:2000; Incorporating Corrigendum July 2003 |
|
CEN EN 764-5 |
Pressure Equipment - Part 5: Compliance and Inspection Documentation of Materials |
|
CEN EN ISO 3834-1 |
Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements-ISO 3834-1:2005; Supersedes EN 729-1:1994 |
|
CEN EN ISO 9974-3 |
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal-To-Metal Sealing - Part 3: Stud Ends with Metal-To-Metal Sealing (Type B)-ISO 9974-3:1996 |
|
CENELEC HD 22.4 S2/ A6 |
AMD 6 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 4: Cords and Flexible Cables |
|
CEN EN 1418 |
Welding Personnel - Approval Testing of Welding Operators for Fusion Welding and Resistance Weld Setters for Fully Mechanized and Automatic Welding of Metallic Materials |
|
CENELEC EN 50110-1 |
Operation of Electrical Installations |
|
CENELEC EN 50419 |
Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE) |
|
CENELEC EN 60034-12 |
Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors-Incorporates Amendment A1:2007 |
|
CENELEC EN 60309-2 |
Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories-Incorporates Amendment A1: 5/2004; A11: 4/2007 |
|
CENELEC EN 62305-4 |
Protection against lightning Part 4: Electrical and electronic systems within structures-IEC 62305-4:2006 |
|
CEN EN 1011-3 |
Welding - Recommendations for Welding of Metallic Materials - Part 3: Arc Welding of Stainless Steels-Includes Amendment A1: 2003 |
|
CEN EN 10220 |
Seamless and welded steel tubes Dimensions and masses per unit length |
|
CEN EN 1289 |
Non-destructive testing of welds Penetrant testing of welds Acceptance levels-Includes amendments A1: 2002 and A2:2003 |
|
CENELEC EN 61346-1 |
Industrial Systems, Installations and Equipment and Industrial Products Structuring Principles and Reference Designations Part 1: Basic Rules (IEC 1346-1 : 1996) |
|
CENELEC EN 61779-4 |
Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 4: Performance Requirements for Group II Apparatus Indicating a Volume Fraction Up to 100% Lower Explosive Limit-Supersedes EN 50057:1998; IEC 61779-4:1998, Modified |
|
CENELEC EN 62040-1-1 |
Uninterruptible power systems (UPS) Part 1-1: General and safety requirements for UPS used in operator access areas-IEC 62040-1-1: 2002 + corrigendum 2002 + corrigendum 2004; Supersedes EN 50091-1-1: 1996 |
|
CEN EN ISO 228-1 |
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation-ISO 228-1: 2000 |
|
CEN EN ISO 4026 |
Hexagon socket set screws with flat point-ISO 4026:2003 |
|
CEN EN 1370 |
Founding - Surface Roughness Inspection by Visual Tactile Comparators |
|
CENELEC EN 60034-8 |
Rotating electrical machines - Part 8: Terminal markings and direction of rotation |
|
CENELEC EN 61241-18 |
Electrical apparatus for use in the presence of combustible dust Part 18: Protection by encapsulation |
|
CEN EN ISO 8748 |
Spring-Type Straight Pins - Coiled, Heavy Duty |
|
CENELEC EN 50015 |
Electrical Apparatus for Potentially Explosive Atmospheres - Oil Immersion |
|
CENELEC EN 60034-6 |
Rotating Electrical Machines Part 6: Methods of Cooling (IC Code) (IEC 34-6 : 1991) |
|
CENELEC EN 61241-10 |
Electrical apparatus for use in the presence of combustible dust Part 10: Classification of areas where combustible dusts are or may be present-IEC 61241-10:2004; Supersedes EN 50281-3:2002 |
|
CENELEC EN 61511-1 |
Functional safety Safety instrumented systems for the process industry sector Part 1: Framework, definitions, system, hardware and software requirements-IEC 61511-1:2003 + corrigendum 2004 |
|
CEN EN ISO 2320 |
Prevailing Torque Type Steel Hexagon Nuts - Mechanical and Performance Requirements-ISO 2320: 1997 |
|
CEN EN ISO 3834-3 |
Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements-ISO 3834-3:2005; Supersedes EN 729-3:1994 |
|
CENELEC EN 50039 |
Electrical Apparatus for Potentially Explosive Atmospheres: Intrinsically Safe Electrical Systems |
|
CENELEC EN 50102 |
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)-Includes amendment A1:1998 |
|
CENELEC EN 50144-2-16 |
Safety of hand-held electric motor operated tools Part 2-16: Particular requirements for tackers |
|
CENELEC EN 60034-4 |
Rotating Electrical Machines Part 4: Methods for Determining Synchronous Machine Quantities from Tests-IEC 34-4: 1985, Modified; Supersedes HD 53.4.S2: 1988 |
|
CEN EN ISO 16812 |
Petroleum and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2002) |
|
CEN EN ISO 6947 |
Welds - Working Positions - Definitions of Angles of Slope and Rotation-ISO 6947: 1990 |
|
CEN EN ISO 8502-2 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces-ISO 8502-2: 2005 |
|
CEN EN ISO 8675 |
Hexagon Thin Nuts (Chamfered) with Metric Fine Pitch Thread - Product Grades A and B-Supersedes EN 28675:1991; ISO 8675:1999 |
|
CENELEC EN 60034-11 |
Rotating electrical machines Part 11: Thermal protection-IEC 60034-11:2004 |
|
CENELEC EN 60335-2-65 |
Household and Similar Electrical Appliances - Safety Part 2-65: Particular Requirements for Air-Cleaning Appliances-IEC 60335-2-65:2002 |
|
CENELEC EN 61558-2-1 |
Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications |
|
CEN EN ISO 15547-2 |
Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers-(ISO 15547-2):2005;:2001 |
|
CEN EN 12622 |
Safety of Machine Tools - Hydraulic Press Brakes |
|
CEN EN 13480-1 |
Metallic Industrial Piping - Part 1: General-Incorporates Amendment A1: 06/2005 |
|
CEN EN 288-4 |
Specification and Approval of Welding Procedures for Metallic Materials - Part 4: Welding Procedure Tests for the Arc Welding of Aluminium and Its Alloys |
|
CENELEC EN 50110-2 |
Operation of Electrical Installations (National Annexes) |
|
CENELEC EN 50126-1 |
Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Part 1: Basic requirements and generic process-Incorporating corrigendum May 2006 |
|
CENELEC EN 50281-1-2 |
Electrical apparatus for use in the presence of combustible dust Part 1-1: Electrical apparatus protected by enclosures Selection and installation and maintenance-Includes amendment A1: 2002; Incorporates Corrigenda August 1999 and December 1999; Partially superseded by EN 61241-14:2004 |
|
CENELEC EN 60034-9 |
Rotating Electrical Machines Part 9: Noise Limits-Incorporates Amendment 1: 2007 |
|
CEN EN 60228 |
Conductors of insulated cables-IEC 60228:2004; Supersedes HD 383 S2:1986 + A1:1989 + A2:1993 |
|
CENELEC EN 60947-5-2 |
Low-Voltage Switchgear and Controlgear Part 5-2: Control Circuit Devices and Switching Elements Proximity Switches-Includes Amendment A1:1999 and A2: 2004; IEC 60947-5-2:1997, Modified + A1:1999 + A2:2004 |
|
CENELEC EN 60947-6-1 |
Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment - Transfer switching equipment |
|
CEN EN 61511-3 |
Functional safety Safety instrumented systems for the process industry sector Part 3: Guidance for the determination of the required safety integrity levels-IEC 61511-3:2003 + Corrigendum 2004 |
|
CENELEC EN 61547 |
Equipment for General Lighting Purposes EMC Immunity Requirements-Includes Amendment A1:2000; IEC 61547: 1995 + A1:2000 |
|
CENELEC EN 61558-2-7 |
Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys |
|
CENELEC EN 62305-3 |
Protection against lightning Part 3: Physical damage to structures and life hazard-IEC 62305-3:2006 |
|
CEN EN 730-1 |
Gas welding equipment Safety devices Part 1: Incorporating a flame (flashback) arrestor |
|
CEN EN 792-9 |
Hand-Held Non-Electric Power Tools - Safety Requirements - Part 9: Die Grinders |
|
CEN EN ISO 3834-5 |
Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834- 3 or ISO 3834-4-ISO 3834-5:2005 |
|
CEN EN ISO 8178-4 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement Part 4: Test Cycles for Different Engine Applications-ISO 8178-4: 1996 |
|
CEN EN 14511-2 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions-Supersedes EN 12055:1998, EN 255-2:1997 and EN 814-2:1997 |
|
CEN EN 378-1 |
Refrigerating Systems and Heat Pumps - Safety and Environmental Requirements - Part 1: Basic Requirements, Definitions, Classification and Selection Criteria-(Includes Amendment A1:2003) |
|
CENELEC EN 50144-1 |
Safety of hand-held electric motor operated tools - Part 1: General requirements-Includes amendments A1: 2002 and A2: 2003; Incorporating Corrigendum 1:2005 |
|
CENELEC EN 60216-4-1 |
Electrical insulating materials - Thermal endurance properties Part 4-1: Ageing ovens - Single-chamber ovens-IEC 60216-4-1:2006;:1992 |
|
CENELEC EN 60255-6 |
Electrical Relays Part 6: Measuring Relays and Protection Equipment (IEC 255-6 : 1988, Modified) |
|
CENELEC EN 60320-2-2 |
Appliance Couplers for Household and Similar General Purposes Part 2-2: Interconnection Couplers for Household and Similar Equipment-IEC 60320-2-2:1998 |
|
CENELEC EN 60445 |
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and conductor terminations |
|
CENELEC EN 61210 |
Connecting Devices Flat Quick-Connect Terminations for Electrical Copper Conductors Safety Requirements (IEC 1210 : 1993, Modified) |
|
CENELEC EN 61215 |
Crystalline Silicon Terrestrial Photovoltaic (PV) Modules Design Qualification and Type Approval-IEC 61215:2005 |
|
CENELEC EN 61511-2 |
Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of IEC 61511-1-IEC 61511-2:2003 |
|
CENELEC EN 61857-1 |
Electrical insulation systems Procedures for thermal evaluation Part 1: General requirements Low-voltage-IEC 61857-1:2004 |
|
CEN EN ISO 15613 |
Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test-ISO 15613:2004 |
|
CENELEC CLC/TR 62102 |
Electrical safety - Classification of interfaces for equipment to be connected to information and ommunications technology networks |
|
CEN EN 1321 |
Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds |
|
CEN EN 1822-5 |
High Efficiency Particulate Air Filters (HEPA and ULPA) - Part 5: Determining the Efficiency of Filter Element |
|
CEN EN 439 |
Welding Consumables Shielding Gases for Arc Welding and Cutting |
|
CENELEC EN 60947-3 |
Low-Voltage Switchgear and Controlgear Part 3: Switches, Disconnectors, Switch-Disconnectors and Fuse-Combination Units-Includes Amendment A1: 2001; Incorporating Corrigendum August 2001; Includes amendment A2:2005; IEC 60947-3: 1999 + A1: 2001 |
|
CENELEC EN 61131-3 |
Programmable controllers Part 3: Programming languages-IEC 61131-3:2003 |
|
CENELEC EN 62305-2 |
Protection against lightning Part 2: Risk management-IEC 62305-2:2006 |
|
CEN EN ISO 10642 |
Hexagon socket countersunk head screws-ISO 10642:2004 |
|
CEN EN ISO 10683 |
Fasteners - Non-Electrolytically Applied Zinc Flake Coatings-ISO 10683:2000 |
|
CEN EN ISO 15609-2 |
Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Specification - Part 2: Gas Welding-ISO 15609-2:2001; Includes Amendment A1:2003 |
|
CEN EN ISO 2338 |
Parallel Pins, of Unhardened Steel and Austenitic Stainless Steel-ISO 2338: 1997 |
|
CEN EN ISO 7042 |
Prevailing Torque Type All-Metal Hexagon Nuts - Property Classes 5, 8, 10 and 12-ISO 7042:1997 |
|
CEN EN ISO 8178-1 |
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 1: Test-Bed Measurement of Gaseous and Particulate Exhaust Emissions-ISO 8178-1: 1996 |
|
CEN EN ISO 9974-2 |
Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal-To-Metal Sealing - Part 2: Stud Ends with Elastromeric Sealing (Type E)-ISO 9974-2:1996 |
|
CEN EN 10052 |
Vocabulary of Heat Treatment Terms for Ferrous Products |
|
CEN EN 1011-2 |
Welding Recommendations for welding of metallic materials Part 2: Arc welding of ferritic steels-Includes Amendment A1:2003 |
|
CENELEC EN 60034-15 |
Rotating Electrical Machines - Part 15: Impulsive Voltage Withstand Levels of Rotating a.c. Machines with Form-Wound Stator Coils (IEC 34-15 : 1995) |
|
CENELEC EN 60034-18-1 |
Rotating Electrical Machines Part 18: Functional Evaluation of Insulation Systems Section 1: General Guidelines-Includes Amendment A1: 1996; IEC 34-18-1: 1992 + Corrigendum 1992 + A1: 1996 |
|
CENELEC EN 60691 |
Thermal-links Requirements and application guide-Includes Amendment A1: January 2007 |
|
CENELEC EN 61029-1 |
Safety of transportable motor-operated electric tools Part 1: General requirements-Includes amendments A11:2003 and A12:2003; IEC 61029-1:1990, modified |
|
CENELEC EN 61241-11 |
Electrical apparatus for use in the presence of combustible dust Part 11: Protection by intrinsic safety |
|
CENELEC EN 61558-2-17 |
Safety of Power Transformers, Power Supply Units and Similar Part 2-17: Particular Requirements for Transformers for Switch Mode Power Supplies-IEC 61558-2-17: 1997 |
|
CEN EN ISO 3506-4 |
Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 4: Tapping screws-ISO 3506-4:2003 |
|
CEN EN ISO 7085 |
Mechanical and Performance Requirements of Case Hardened and Tempered Metric Thread Rolling Screws-ISO 7085:1999 |
|
CENELEC HD 21.13 S1 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 13: Oil Resistant PVC Sheathed Cables with Two or More Conductors |
|
CEN EN 10217-1 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties-Includes Amendment A1:2005 |
|
CEN EN 10217-2 |
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties-Incudes amendment A1:2005 |
|
CEN EN 1822-2 |
High Efficiency Air Filters (HEPA and ULPA) - Part 2: Aerosol Production, Measuring Equipment, Particle Counting Statistics |
|
CEN EN 26157-3 |
Fasteners - Surface Discontinuities - Part 3: Bolts, Screws and Studs for Special Requirements |
|
CENELEC EN 55012 |
Vehicles, Boats, and Internal Combustion Engine Driven Devices - Radio Disturbance Characteristics - Limits and Methods of Measurement for the Protection of Receivers Except Those Installed in the Vehicle/Boat/Device Itself or in Adjacent Vehicles/Boats/Devices-Incorporates Amendment A1: March 2005 |
|
CENELEC EN 60086-1 |
Primary Batteries Part 1: General-IEC 60086-1:2000 |
|
CENELEC EN 60127-6 |
Miniature fuses Part 6: Fuse-holders for miniature cartridge fuse-links-Includes amendment A1:1996 and A2:2003; IEC 60127-6:1994 + A1:1996 + A2 2002; Supersedes EN 60257: 1990 |
|
CENELEC EN 60598-2-20 |
Luminaires Part 2: Particular requirements Section 20: Lighting chains-Includes amendment A1:1998 and A2:2004; IEC 60598-2-20:1996 + A1:1998 + A2:2004, modified |
|
CENELEC EN 60617-8 |
Graphical Symbols for Diagrams Part 8: Measuring Instruments, Lamps and Signalling Devices-IEC 617-8: 1996 |
|
CENELEC EN 60934 |
Circuit-Breakers for Equipment (CBE)-Incorporates Amendment A1: February 2007 |
|
CENELEC EN 61340-5-1 |
Electrostatics - Part 5-1: Protection of Electronic Devices from Electrostatic Phenomena - General Requirements-IEC 61340-5-1:1998 + Corrigendum 1999 |
|
CENELEC EN 61779-3 |
Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 3: Performance Requirements for Group I Apparatus Indicating a Volume Fraction Up to 100% Methane in Air-Supersedes EN 50056:1998; IEC 61779-3:1998, Modified |