|
CENELEC EN 60950-1 |
Information technology equipment - Safety Part 1: General requirements-IEC 60950-1:2005 |
|
CENELEC EN 55022 |
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement-CISPR 22:2005 |
|
CENELEC EN 61000-4-4 |
Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test-IEC 61000-4-4:2004; Incorporating corrigendum August 2006 |
|
CENELEC EN 60825-1 |
Safety of Laser Products - Part 1: Equipment Classification, Requirements and User's Guide-Superesedes EN 60825: 1991; Includes Amendments A2: 2001 and A1: 2002; IEC 60825-1: 1993 + Corrigendum 1994 + A2:2001 + Corrigendum June 2002 + A1: 2002; Incorporates corrigendum February 1995 and April 2004 |
|
CENELEC EN 60730-1 |
Automatic electrical controls for household and similar use - Part 1: General requirements-including amendments A1:2004, A11:2002, A12:2003, A13:2004 and A14:2005; IEC 60730-1:1999 +A1:2003, modified; |
|
CENELEC EN 61000-3-2 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current greater than or equal to 16 A per phase)-IEC 61000-3-2:2005 |
|
CENELEC EN 55011 |
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement-Includes amendments A2:2007 |
|
CENELEC EN 55024 |
Information technology equipment Immunity characteristics Limits and methods of measurement-Includes amendments A1:2001 and A2:2003; CISPR 24:1997 + A1:2001 + A2:2002, modified |
|
CENELEC EN 61800-3 |
Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods-IEC 61800-3:2004 |
|
CENELEC EN 61000-4-5 |
Electromagnetic Compatibility (EMC) - Part 4-5: Testing and Measurement Techniques - Surge Immunity Test-IEC 61000-4-5:2005 |
|
CENELEC EN 61000-6-2 |
Electromagnetic compatibility (EMC) Part 6-2: Generic standards – Immunity for industrial environments-IEC 61000-6-2: 2005 |
|
CENELEC EN 61000-4-3 |
Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test-IEC 61000-4-3:2006 |
|
CENELEC EN 61131-2 |
Programmable controllers Part 2: Equipment requirements and tests-Incorporates Corrigendum August 2003; IEC 61131-2:2003 |
|
CENELEC EN 61508-1 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems Part 1: General Requirements-IEC 61508-1: 1998 + Corrigendum 1999 |
|
CENELEC EN 55020 |
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement |
|
CENELEC EN 60950 |
Safety of Information Technology Equipment-IEC 60950: 1999 + Corr. January 2000, Modified; Incorporating Corrigendum February 2002 |
|
CENELEC EN 61000-6-3 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
|
CENELEC EN 55014-1 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1: Emission |
|
CENELEC EN 60601-1-2 |
Medical Electrical Equipment Part 1-2: General Requirements for Safety - Collateral Standard: Electromagnetic Compatibility - Requirements and Tests-Amendment A1: May 2006; IEC 60601-1-2: 2001 |
|
CENELEC EN 61326/A3 |
Electrical equipment for measurement, control and laboratory use - EMC requirements-Annexes E & F of IEC 61326:2002 + corrigendum 2002; Ratified European Text |
|
CENELEC EN 61000-6-4 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
|
CENELEC EN 55013 |
Sound and Television Broadcast Receivers and Associated Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement-Including amendment A1:2003; CISPR 13:2001 + A1:2003, modified; Amendment A2: 2006 |
|
CENELEC EN 61000-6-1 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
|
CENELEC EN 55014-2 |
Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus Part 2: Immunity - Product Family Standard-Includes Amendment A1: 2001; CISPR 14-2: 1997; Supersedes EN 55104: 1995; Incorporating Corrigendum December 1997 |
|
CENELEC EN 55103-1 |
Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use Part 1: Emission |
|
CENELEC EN 61508-7 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems Part 7: Overview of Techniques and Measures-IEC 61508-7:2000 |
|
CENELEC EN 61326-1 |
Electrical equipment for measurement, control and laboratory use – EMC requirements Part 1: General requirements-IEC 61326-1:2005;:1997 |
|
CENELEC EN 55103-2 |
Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use Part 2: Immunity |
|
CENELEC EN 61000-4-7 |
Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto-IEC 61000-4-7:2002 |
|
CENELEC EN 61000-4-8 |
Electromagnetic Compatibility (EMC) - Part 4-8: Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test-Including Amendment A1: 2001; IEC 61000-4-8: 1993 + A1: 2000 |
|
CEN EN 12079 |
Offshore Containers - Design, Construction, Testing, Inspection and Marking-: 1999 |
|
CENELEC EN 50419 |
Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE) |
|
CEN EN 1010-1 |
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
|
CENELEC EN 60945 |
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results-IEC 60945: 2002 |
|
CENELEC EN 61000-2-4 |
Electromagnetic Compatibility (EMC) Part 2-4: Environment - Compatibility Levels in Industrial Plants for Low-Frequency Conducted Disturbances-IEC 61000-2-4: 2002 |
|
CENELEC EN 60215 |
Safety Requirements for Radio Transmitting Equipment (IEC 215 (1987) ed 3 + A1 : 1992 + A2 : 1994) (Includes Amendments A1 : 1992 + A2 : 1994) |
|
CENELEC EN 61000-4-12 |
Electromagnetic compatibility (EMC) Part 4-12: Testing and measurement techniques - Ring wave immunity test |
|
CENELEC EN 61000-3-11 |
Electromagnetic Compatibility (EMC) Part 3-11: Limits - Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public Low-Voltage Supply Systems - Equipment with Rated Current Greater than or Equal to 75 A and Subject to Conditional Connection-IEC 61000-3-11:2000 |
|
CENELEC EN 61131-1 |
Programmable controllers Part 1 : General information-IEC 61131-1:2003 |
|
CEN EN 4179 |
Aerospace Series - Qualification and Approval of Personnel for Non-Destructive Testing |
|
CENELEC EN 60384-1 |
Fixed Capacitors for Use in Electronic Equipment Part 1: Generic Specification-IEC 60384-1:1999, Modified |
|
CEN EN 474-1 |
Earth-Moving Machinery - Safety - Part 1: General Requirements |
|
CENELEC EN 50332-1 |
Sound System Equipment - Headphones and Earphones Associated with Portable Audio Equipment - Maximum Sound Pressure Level Measurement Methodology and Limit Considerations - Part 1: General Method for |
|
CENELEC EN 133200 |
Sectional Specification: Passive Filter Units for Electromagnetic Interference Suppression (Filters for Which Safety Tests are Required) |
|
CENELEC EN 60384-14-2 |
Fixed capacitors for use in electronic equipment Part 14-2: Blank detail specification Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Safety tests only-IEC 60384-14-2:2004; Partially supersedes EN 132421:1997 |
|
CENELEC EN 60950-21 |
Information technology equipment Safety Part 21: Remote power feeding-IEC 60950-21:2002; Incorporating Corrigendum August 2003 |
|
CEN EN ISO 3450 |
Earth-Moving Machinery - Braking Systems of Rubber-Tyred Machines - Systems and Performance Requirements and Test Procedures (ISO 3450 : 1996) |
|
CENELEC EN 61984 |
Connectors - Safety Requirements and Tests-IEC 61984:2001 |
|
CEN EN 13001-2 |
Crane safety - General design - Part 2: Load effects |
|
CEN EN 1459 |
Safety of Industrial Trucks - Self-Propelled Variable Reach Trucks-Includes Amendment A1: September 2006 |
|
CENELEC EN 50385 |
Product Standard to Demonstrate the Compliances of Radio Base Stations and Fixed Terminal Stations for Wireless Telecommunication Systems with the Basic Restrictions or the Reference Levels Related to Human Exposure to Radio Frequency Electromagnetic Fields (110 MHz - 40 GHz) - General Public |
|
CEN EN ISO 9241-11 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 11: Guidance on Usability-Incorporating Amendment N0. 1 |
|
CENELEC ENV 50204 |
Radiated Electromagnetic Field from Digital Radio Telephones Immunity Test |
|
CEN EN 13001-1 |
Crane safety - General design - Part 1: General principles and requirements |
|
CEN EN 13157 |
Cranes - Safety - Hand powered lifting equipment |
|
CEN EN 13852-1 |
Cranes - Offshore cranes - Part 1: General - purpose offshore cranes-Incorporating corrigendum No. 1 2005 |
|
CENELEC EN 50332-2 |
Sound system equipment: Headphones and earphones associated with portable audio equipment Maximum sound pressure level measurement methodology and limit considerations Part 2: Matching of sets with headphones if either or both are offered separately |
|
CEN EN 2563 |
Aerospace Series - Carbone Fibre Reinforced Plastics - Unidirectional Laminates - Determination of the Apparent Interlaminar Shear Strength |
|
CEN EN 12016 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
|
CEN EN 415-3 |
Safety of Packaging Machines - Part 3: Form, Fill and Seal Machines |
|
CENELEC EN 61000-4-13 |
Electromagnetic Compatibility (EMC) - Part 4-13: Testing and Measurement Techniques - Harmonics and Interharmonics Including Mains Signalling at a.c. Power Port, Low Frequency Immunity Tests-IEC 61000-4-13: 2002 |
|
CENELEC EN 50383 |
Basic Standard for the Calculation and Measurement of Electromagnetic Field Strength and SAR Related to Human Exposure from Radio Base Stations and Fixed Terminal Stations for Wireless Telecommunications Systems (110 MHz - 40 GHz) |
|
CENELEC EN 61000-2-2 |
Electromagnetic Compatibility (EMC) Part 2-2: Environment Compatibility Levels for Low-Frequency Conducted Disturbances and Signalling in Public Low-Voltage Power Supply Systems |
|
CENELEC EN 61158-2 |
Digital data communications for measurement and control - Fieldbus for use in industrial control systems Part 2: Physical layer specification and service definition-IEC 61158-2:2003 + corrigendum 2004; Partially supersedes EN 50170:1996 + A1:2002 + A2:1999 + A3:2002 and EN 50254:1998 |
|
CEN EN 13414-1 |
Steel wire rope slings - Safety - Part 1: Slings for general lifting service-Includes amendment A1:2005 |
|
CENELEC EN 50091-2/PRA1 |
Uninterruptable Power Systems (UPS) Part 2: EMC Requirements |
|
CENELEC EN 61000-4-1 |
Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
|
CENELEC EN 61131-3 |
Programmable controllers Part 3: Programming languages-IEC 61131-3:2003 |
|
CENELEC EN 50121-3-2 |
Railway applications - Electromagnetic compatibility Part 3-2: Rolling stock - Apparatus |
|
CENELEC EN 55012 |
Vehicles, Boats, and Internal Combustion Engine Driven Devices - Radio Disturbance Characteristics - Limits and Methods of Measurement for the Protection of Receivers Except Those Installed in the Vehicle/Boat/Device Itself or in Adjacent Vehicles/Boats/Devices-Incorporates Amendment A1: March 2005 |
|
CEN EN 13414-2 |
Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer-Includes amendment A1:2005 |
|
CEN EN ISO 9241-7 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 7: Requirements for Display with Reflections-ISO 9241-7:1998 |
|
CEN EN 415-1 |
Packaging Machines Safety - Part 1: Terminology and Classification of Packaging Machines and Associated Equipment |
|
CENELEC EN 50121-1 |
Railway applications - Electromagnetic compatibility Part 1: General |
|
CENELEC EN 50155 |
Railway applications ¯ Electronic equipment used on rolling stock-Includes amendment A1:2002; Incorporating corrigendum April 2003 |
|
CENELEC EN 60747-5-2 |
Discrete Semiconductor Devices and Integrated Circuits - Part 5-2: Optoelectronic Devices - Essential Ratings and Characteristics-Includes Amendment A1:2002; IEC 61747-5-2: 1997 + A1:2002 |
|
CEN EN 9100 |
Aerospace series - Quality management systems - Requirements (based on ISO 9001:2000) and Quality systems - Model for quality assurance in design, development, production, installation and servicing-Based on ISO 9001:1994 |
|
CEN EN ISO 3411 |
Earth-Moving Machinery - Human Physical Dimensions of Operators and Minimum Operator Space Envelope-ISO 3411:1995; Supersedes EN 23411: 1988 |
|
CEN EN ISO 5353 |
Earth-Moving Machinery, and Tractors and Machinery for Agriculture and Forestry - Seat Index Point-ISO 5353:1995; Supersedes EN 25353:1988 |
|
CEN EN 1175-1 |
Safety of Industrial Trucks - Electrical Requirements Part 1: General Requirements for Battery Powered Trucks |
|
CEN EN 13428 |
Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction |
|
CEN EN ISO 7779 |
Acoustics - Measurement of Airborne Noise Emitted by Information Technology and Telecommunications Equipment-Includes Amendment A1:2003; Supersedes EN 27779:1991; ISO 7779:1999 + A1:2003 |
|
CEN EN ISO 9241-4 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 4: Keyboard Requirements-ISO 9241-4: 1998 |
|
CENELEC EN 50 116 |
Information Technology Equipment Routine Electrical Safety Testing in Production |
|
CENELEC EN 60252-1 |
A.C. Motor Capacitors Part 1: General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation-IEC 60252-1:2001 |
|
CENELEC EN 60384-14-3 |
Fixed capacitors for use in electronic equipment Part 14-3: Blank detail specification Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Assessment level DZ-IEC 60384-14-3:2004; Partially supersedes EN 132421:1997 |
|
CENELEC EN 61000-4-30 |
Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques Power quality measurement methods-IEC 61000-4-30:2003; Incorporating Corrigendum August 2006 |
|
CENELEC EN 61204-3 |
Low Voltage Power Supplies, D.C. Output Part 3: Electromagnetic Compatibility (EMC)-IEC 61204-3: 2000 |
|
CEN EN ISO/IEC 13818-1 |
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information - Part 1: Systems-ISO/IEC 13 818-1: 1996 |
|
CEN EN 12015 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission |
|
CENELEC EN 41003 |
Particular Safety Requirements for Equipment to Be Connected to Telecommunication Networks |
|
CENELEC EN 50288-2-1 |
Multi-element metallic cables used in analogue and digital communication and control Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables |
|
CENELEC EN 60617-4 |
Graphical Symbols for Diagrams Part 4: Basic Passive Components (IEC 617-4 : 1996) |
|
CENELEC EN 61000-4-10 |
Electromagnetic Compatibility (EMC) - Part 4-10: Testing and Measurement Techniques - Damped Oscillatory Magnetic Field Immunity Test-Includes Amendment A1:2001; IEC 61000-4-10:1993 + A1:2000 |
|
CENELEC EN 61000-4-9 |
Electromagnetic Compatibility (EMC) - Part 4-9: Testing and Measurement Techniques - Pulse Magnetic Field Immunity Test-Includes Amendment A1: 2001; IEC 1000-4-9: 1993 + A1: 2000 |
|
CEN EN ISO 128-21 |
Technical Drawings - General Principles of Presentation - Part 21: Preparation of Lines by CAD Systems-ISO 128-21: 1997 |
|
CEN EN 1010-4 |
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines |
|
CEN EN 13309 |
Construction Machinery - Electromagnetic Compatibililty of Machines with Internal Electrical Power Supply |
|
CEN EN 13411-3 |
Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
|
CENELEC EN 50121-5 |
Railway applications - Electromagnetic compatibility Part 5: Emission and immunity of fixed power supply installations and apparatus |
|
CENELEC EN 55016-1-1 |
Specification for radio disturbance and immunity measuring apparatus and methods — Part 1-1: Radio disturbance and immunity measuring apparatus — Measuring apparatus-includes Amendment A1: 2007 |
|
CENELEC ENV 50141 |
Electromagnetic Compatibility - Basic Immunity Standard - Conducted Disturbances Induced by Radio- Frequency Fields - Immunity Test |
|
CENELEC EN 50083-2 |
Cable networks for television signals, sound signals and interactive services Part 2: Electromagnetic compatibility for equipment |
|
CENELEC EN 50116 |
Information Technology Equipment Routine Electrical Safety Testing in Production |
|
CENELEC EN 50121-2 |
Railway applications - Electromagnetic compatibility Part 2: Emission of the whole railway system to the outside world |
|
CENELEC EN 50360 |
Product Standard to Demonstrate the Compliance of Mobile Phones with the Basic Restrictions Related to Human Exposure to Electromagnetic Fields (300 MHz - 3 GHz)-Incorporates Corrigendum: July 2006 |
|
CENELEC EN 55015 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment-CISPR 15:2005 |
|
CENELEC EN 60617-12 |
Graphical Symbols for Diagrams Part 12: Binary Logic Elements-IEC 60617-12:1997 |
|
CENELEC EN 61000-4-16 |
Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz-IEC 61000-4-16:1998; Includes amendment A1:2004 |
|
CEN EN ISO 9241-13 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 13: User Guidance-ISO 9241-13:1998 |
|
CEN CEN/TS 13001-3.1 |
Cranes - General design - Part 3.1: Limit states and proof of competence of steel structures-Incorporating Corrigendum July 2006 |
|
CEN EN 12077-2 |
Cranes Safety - Requirements for Health and Safety - Part 2: Limiting and Indicating Devices |
|
CEN EN 12895 |
Industrial Trucks - Electromagnetic Compatibility |
|
CEN EN 2491 |
Aerospace Series - Molybdenum Disulfide Dry Lubricants - Coating Methods |
|
CENELEC EN 50126 |
Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Saftey (RAMS) |
|
CENELEC EN 50128 |
Railway Applications - Communications, Signalling and Processing Systems - Software for Railway Control and Protection Systems |
|
CEN EN ISO 7096 |
Earth-moving machinery - Laboratory evaluation of operator seat vibration-ISO 7096:2000 |
|
CEN EN ISO 9241-8 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 8: Requirements for Displayed Colours-ISO 9241-8:1997 |
|
CEN EN ISO/IEC 7487-1 |
Information Technology - Data Interchange on 130 mm (5,25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7958 ftprad, 1,9 tpmm (48 tpi), on Both Sides - ISO Type 202 - Part 1: Dimensional, Physical and Magnetic Characteristics (ISO/IEC 7487-1 : 1993) |
|
CENELEC CLC/TS 61496-2 |
Safety of machinery Electro-sensitive protective equipment Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPD)-IEC 61496-2:1997 |
|
CEN EN 1010-3 |
Safety of machinery Safety requirements for the design and construction of printing and paper converting machines Part 3: Cutting machines |
|
CEN EN 12063 |
Execution of Special Geotechnical Work - Sheet-Pile Walls |
|
CEN EN 12643 |
Earth-Moving Machinery - Rubber-Tyred Machines - Steering Requirements-ISO 5010:1992 Modified |
|
CEN EN 1726-1 |
Safety of industrial trucks Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N Part 1: General requirements-Includes Amendment A1:2003) |
|
CENELEC EN 50091-2 |
Text of Corrigendum-Ratified European Text; Corrigendum January, 1998 |
|
CENELEC EN 50288-5-1 |
Multi-element metallic cables used in analogue and digital communication and control Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables |
|
CENELEC EN 55025 |
Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement-CISPR 25: 2002 |
|
CENELEC EN 60617-6 |
Graphical Symbols for Diagrams Part 6: Production and Conversion of Electrical Energy-IEC 617-6: 1996 |
|
CEN EN 617 |
Continuous Handling Equipment and Systems - Safety and EMC Requirements for the Equipment for the Storage of Bulk Materials in Silos, Bunkers, Bins and Hoppers |
|
CEN EN 619 |
Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of unit loads |
|
CEN EN ISO/IEC 7810 |
Identification Cards - Physical Characteristics-ISO/IEC 7810: 1995 |
|
CENELEC HD 620 S1 |
Distribution Cables with Extruded Insulation for Rated Voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV-Volume 1: Parts 1 to 5 |
|
CEN EN 13023 |
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 |
|
CEN EN 13411-1 |
Terminations for Steel Wire Ropes - Safety - Part 1: Thimbles for Steel Wire Rope Slings |
|
CEN EN 3049 |
Aerospace Series - O-Rings, in Fluorocarbon Rubber (FKM), Low Compression Set - Hardness 80 IRHD |
|
CEN EN 415-2 |
Safety of Packaging Machines - Part 2: Pre-Formed Rigid Container Packaging Machines |
|
CENELEC EN 50065-1 |
Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 148,5 kHz Part 1: General Requirements, Frequency Bands and Electromagnetic Disturbances |
|
CENELEC EN 50121-4 |
Railway applications - Electromagnetic compatibility Part 4: Emission and immunity of the signalling and telecommunications apparatus |
|
CENELEC EN 50288-1 |
Multi-element metallic cables used in analogue and digital communication and control Part 1: Generic specification |
|
CENELEC HD 620 S1 |
Distribution Cables with Extruded Insulation for Rated Voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV-Volume II: Parts 6 to 9 |
|
CEN EN 13432 |
Packaging - Requirements for Packaging Recoverable Through Composting and Biodegradation - Test Scheme and Evaluation Criteria for the Final Acceptance of Packaging |
|
CEN EN 13557 |
Cranes Controls and control stations |
|
CEN EN 2557 |
Aerospace Series - Carbon Fibre Preimpregnates - Determination of Mass Per Unit Area |
|
CENELEC EN 50147-2 |
Anechoic Chambers Part 2: Alternative Test Site Suitability with Respect to Site Attenuation |
|
CENELEC EN 50174-2 |
Information Technology - Cabling Installation - Part 2: Installation Planning and Practices Inside Buildings |
|
CENELEC EN 50256 |
Characteristics of DVB Receivers |
|
CENELEC EN 50370-1 |
Electromagnetic compatibility (EMC) Product family standard for machine tools Part 1: Emission |
|
CENELEC EN 55016-2-1 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements-Includes Amendment 1: August 2005; CISPR 16-2-1:2003 |
|
CENELEC EN 60068-2-58 |
Environmental testing Part 2-58: Tests Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)-IEC 60068-2-58:2004 |
|
CENELEC EN 60617-11 |
Graphical Symbols for Diagrams Part 11: Architectural and Topographical Installation Plans and Diagrams-IEC 617-11 : 1996 |
|
CENELEC EN 61000-4-20 |
Electromagnetic compatibility (EMC) Part 4-20: Testing and measurement techniques Emission and immunity testing in transverse electromagnetic (TEM) waveguides-IEC 61000-4-20: 2003 |
|
CENELEC EN 61158-6 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems Part 6: Application layer protocol specification-IEC 61158-6:2003 + corrigendum 2004; Partially supersedes EN 50170:1996 + A1:2002 + A2:1999 + A3:2002 and EN 50254:1998 |
|
CENELEC CLC/TR 61158-1 |
Digital data communications for measurement and control Fieldbus for use in industrial control systems Part 1: Overview and guidance for the IEC 61158 series-IEC/TR 61158-1:2003 |
|
CEN EN 13411-4 |
Terminations for Steel Wire Ropes - Safety - Part 4: Metal and Resin Socketing |
|
CEN EN 13427 |
Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste |
|
CEN EN 13431 |
Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value |
|
CEN EN 1677-1 |
Components for Slings - Safety - Part 1: Forged Steel Components, Grade 8 |
|
CEN EN 1789 |
Medical Vehicles and Their Equipment - Road Ambulances |
|
CEN EN 2597 |
Aerospace Series - Carbon Fibre Reinforced Plastics - Unidirectional Laminates - Tensile Test Perpendicular to the Fibre Direction |
|
CEN EN 474-3 |
Earth-moving machinery - Safety - Part 3: Requirements for loaders |
|
CENELEC EN 60146-2 |
Semiconductors convertors Part 2: Self-commutated semiconductor converters including direct d.c. converters-IEC 60146-2: 1999 |
|
CENELEC EN 60825-12 |
Safety of laser products Part 12: Safety of free space optical communication systems used for transmission of information-IEC 60825-12:2004 |
|
CENELEC EN 61000-2-12 |
Electromagnetic compatibility (EMC) Part 2-12: Environment Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems-IEC 61000-2-12:2003 |
|
CENELEC EN 61000-5-5 |
Electromagnetic Compatibility (EMC) Part 5: Installation and Mitigation Guidelines Section 5: Specification of Protective Devices for HEMP Conducted Disturbance Basic EMC Publication-IEC 1000-5-5: 1996 |
|
CENELEC EN 61131-7 |
Programmable Controllers Part 7: Fuzzy Control Programming-IEC 61131-7:2000 |
|
CENELEC EN 61851-1 |
Electric Vehicle Conductive Charging System Part 1: General Requirements-IEC 61851-1:2001 |
|
CEN EN ISO 3457 |
Earth-moving machinery - Guards - Definitions and requirements-ISO 3457:2003 |
|
CEN EN 3748 |
Aerospace Series - O-Ring Grooves - Dimensions |
|
CENELEC EN 50014-2 |
Electromagnetic Compatibility Requirements for Household Appliances, Electric Tools and Similar Apparatus Part 2: Immunity Product Family Standard-CISPR 14-2: 1997 |
|
CENELEC EN 50117-3-1 |
Coaxial Cables Part 3-1: Sectional Specifications for Cables Used in Telecom Applications - Miniaturized Cables Used in Digital Communication Systems |
|
CENELEC EN 50121-3-1 |
Railway Applications - Electromagnetic Compatibility - Part 3-1: Rolling Stock - Train and Complete Vehicle |
|
CENELEC EN 50290-2-23 |
Communication Cables - Part 2-23: Common Design Rules and Construction - PE Insulation-:1994 |
|
CENELEC EN 55016-1-4 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus – Ancillary equipment – Radiated disturbances-Includes Amendments A1:2005 and A2:2005; CISPR 16-1-4:2003 + A1:2004 + A2:2005; |
|
CENELEC EN 55016-1-5 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 1-5: Radio disturbance and immunity measuring apparatus Antenna calibration test sites for 30 MHz to 1 000 MHz-CISPR 16-1-5:2003 |
|
CENELEC EN 60068-2-42 |
Environmental testing Part 2-42: Tests Test Kc: Sulphur dioxide test for contacts and connections-IEC 60068-2-42: 2003 |
|
CENELEC EN 61000-4-14 |
Electromagnetic compatibility (EMC) Part 4-14: Testing and measurement techniques Voltage fluctuation immunity test-Includes amendment A1:2004; IEC 61000-4-14:1999 |
|
CENELEC EN 61000-4-29 |
Electromagnetic Compatibility (EMC) Part 4-29: Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations on D.C. Input Power Port Immunity Tests-IEC 61000-4-29:2000 |
|
CEN EN 868-2 |
Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 2: Sterilization Wrap - Requirements and Test Methods |
|
CEN EN ISO 3164 |
Earth-Moving Machinery - Laboratory Evaluations of Protective Structures - Specifications for Deflection-Limiting Volume-ISO 3164: 1995; Supersedes EN 23164: 1985 |
|
CEN EN ISO 8666 |
Small craft Principal data-ISO 8666: 2002 |
|
CEN CEN/TS 13001-3-2 |
Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems-CORR: July 2006 |
|
CEN EN 13411-6 |
Terminations for steel wire ropes Safety Part 6: Asymmetric wedge socket |
|
CEN EN 1492-1 |
Textile Slings - Safety - Part 1: Flat Woven Webbing Slings, Made of Man-Made Fibres, for General Purpose Use-Incorporating Corrigendum June 2006 |
|
CEN EN 1551 |
Safety of Industrial Trucks - Self Propelled Trucks over 10 000 KG Capacity |
|
CEN EN 2562 |
Aerospace Series - Carbon Fibre Reinforced Plastics - Unidirectional Laminates - Flexural Test Parallel to the Fibre Direction |
|
CEN EN 28846 |
Small Craft - Electrical Devices - Protection Against Ignition of Surrounding Flammable Gases-Includes Amendment A1:2000; ISO 8846:1990, Modified |
|
CENELEC EN 50117-2-5 PRAA |
Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz |
|
CENELEC EN 50364 |
Limitation of Human Exposure to Electromagnetic Fields from Devices Operating in the Frequency Range 0 Hz to 10 GHz, Used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and Similar Applications |
|
CENELEC EN 60252-2 |
AC motor capacitors Part 2: Motor start capacitors-IEC 60252-2:2003 |
|
CENELEC EN 60617-13 |
Graphical Symbols for Diagrams Part 13: Analogue Elements (IEC 617-13 : 1993) |
|
CENELEC EN 60617-9 |
Graphical Symbols for Diagrams Part 9: Telecommunications: Switching and Peripheral Equipment-IEC 617-9: 1996 |
|
CENELEC EN 61000-4-24 |
Electromagnetic Compatibility (EMC) Part 4: Testing and Measurement Techniques Section 24: Test Methods for Protective Devices for HEMP Conducted Disturbance Basic EMC Publication-IEC 61000-4-24: 1997 |
|
CENELEC EN 61000-4-25 |
Electromagnetic Compatibility (EMC) Part 4-25: Testing and Measurement Techniques - HEMP Immunity Test Methods for Equipment and Systems-IEC 61000-4-25: 2001 |
|
CENELEC EN 61709 |
Electronic Components - Reliability - Reference Conditions for Failure Rates and Stress Models for Conversion-IEC 61709:1996 |
|
CEN EN 620 |
Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
|
CEN EN ISO 10088 |
Small Craft - Permanently Installed Fuel Systems and Fixed Fuel Tanks-ISO 10088:2001 |
|
CEN EN ISO 17666 |
Space systems - Risk management-ISO 17666:2003 |
|
CEN EN ISO 6165 |
Earth-moving machinery - Basic types - Identification and terms and definitions-ISO 6165: 2006 |
|
CEN EN ISO 8468 |
Ship´s Bridge Layout and Associated Equipment - Requirements and Guidelines (ISO 8468 : 1990) |
|
CEN EN ISO 9241-15 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) Part 15: Command Dialogues-ISO 9241-15:1997 |
|
CEN EN 1175-2 |
Safety of Industrial Trucks - Electrical Requirements - Part 2: General Requirements of Internal Combustion Engine Power Trucks |
|
CENELEC EN 133000 |
Generic Specification: Passive Filter Units for Electromagnetic Interference Suppression |
|
CEN EN 13411-2 |
Terminations for Steel Wire Ropes - Safety - Part 2: Splicing of Eyes for Wire Rope Slings |
|
CENELEC EN 137000 |
Generic Specification Fixed Aluminium Electrolytic a.c. Capacitors with Non- Solid Electrolyte for Use with Motors |
|
CEN EN 1726-2 |
Safety of Industrial Trucks - Self-Propelled Trucks Up to and Including 10 000 kg Capacity and Tractors with a Drawbar Pull Up to and Including 20 000 N - Part 2: Additional Requirements for Trucks with Elevating Operator Position and Trucks Specifically Designed to Travel with Elevated Loads |
|
CEN EN 1915-1 |
Aircraft Ground Support Equipment - General Requirements - Part 1: Basic Safety Requirements |
|
CENELEC EN 50147-1 |
Anechoic Chambers Part 1: Shield Attenuation Measurement |
|
CENELEC EN 50173-1 |
Information technology - Generic cabling systems Part 1: General requirements and office areas-Incorporating Corrigendum: November 2004 |
|
CENELEC EN 50288-2-2 |
Multi-Element Metallic Cables Used in Analogue and Digital Communication and Control Part 2-2: Sectional Specification for Screened Cables Characterized up to 100 MHz - Work Area and Patch Cord Cables |
|
CENELEC EN 50288-6-1 |
Multi-element metallic cables used in analogue and digital communication and control Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz Horizontal and building backbone cables |
|
CENELEC EN 50289-1-8 |
Communication Cables - Specifications for Test Methods Part 1-8: Electrical Test Methods - Attenuation |
|
CENELEC EN 50290-1-1 |
Communication Cables - Part 1-1: General |
|
CENELEC EN 60068-2-43 |
Environmental testing Part 2-43: Tests Test Kd: Hydrogen sulphide test for contacts and connections-IEC 60068-2-43: 2003 |
|
CENELEC EN 60747-5-3 |
Discrete semiconductor devices and integrated circuits Part 5-3: Optoelectronic devices Measuring methods-Includes amendment A1:2002; IEC 60747-5-3:1997 + A1:2002 |
|
CENELEC EN 60825-4 |
Safety of laser products - Part 4: Laser guards-IEC 60825-4:2006 |
|
CENELEC EN 60939-2 |
Passive filter units for electromagnetic interference suppression Part 2: Sectional specification: Passive filter units for which safety tests are appropriate – Test methods and general requirements-IEC 60939-2:2005; Supersedes EN 133200: 1999 |
|
CENELEC EN 61000-2-10 |
Electromagnetic Compatibility (EMC) Part 2-10: Environment - Description of HEMP Environment - Conducted Disturbance-IEC 61000-2-10: 1998 |
|
CENELEC EN 61000-4-21 |
Electromagnetic compatibility (EMC) Part 4-21: Testing and measurement techniques Reverberation chamber test methods-IEC 61000-4-21: 2003 |
|
CENELEC EN 61196-2 |
Radio-frequency cables Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation-IEC 1196-2: 1995 |
|
CENELEC EN 61360-4 |
Standard data element types with associated classification scheme for electric components Part 4: IEC reference collection of standard data element types and component classes-Incorporates Corrigendum December 2005 |
|
CENELEC EN 61965 |
Mechanical safety of cathode ray tubes-IEC 61965: 2003 |
|
CEN EN ISO 14726-1 |
Ships and Marine Technology - Identification Colours for the Content of Piping Systems - Part 1: Main Colours and Media-ISO 14726-1: 1999 |
|
CEN EN ISO 4165 |
Road Vehicles - Electrical Connections - Double-Pole Connection-ISO 4165:2001; Supersedes EN 24165:1991 |
|
CEN EN 12999 |
Cranes - Loader cranes-Includes amendment A1:2004 |
|
CEN EN 13431 |
Packaging - Requirements for Packaging Recoverable in the Form of Energy Recovery, Including Specification of Minimum Inferior Calorific Value |
|
CEN EN 1361 |
Rubber hoses and hose assemblies for aviation fuel handling - Specification |
|
CEN EN 13852-2 |
Cranes - Offshore cranes - Part 2: Floating cranes |
|
CEN EN 13889 |
Forged steel shackles for general lifting purposes Dee shackles and bow shackles Grade 6 Safety |
|
CEN EN 1677-2 |
Components for Slings - Safety - Part 2: Forged Steel Lifting Hooks with Latch, Grade 8 |
|
CEN EN 1757-1 |
Safety of Industrial Trucks - Pedestrian Propelled Trucks - Part 1: Stacker Trucks |
|
CENELEC EN 50083-1 |
Cabled Distribution Systems for Television, Sound and Interactive Multimedia Signals Part 1: Safety Requirements-Includes Amendments A1: 1997 and A2: 1997 |
|
CENELEC EN 50117-1 |
Coaxial Cables Part 1: Generic Specification |
|
CENELEC EN 50117-2-1 |
Coaxial cables Part 2-1: Sectional specification for cables used in cabled distribution networks Indoor drop cables for systems operating at 5 MHz – 1 000 MHz |
|
CENELEC EN 50293 |
Electromagnetic Compatibility - Road Traffic Signal Systems - Product Standard |
|
CENELEC EN 50370-2 |
Electromagnetic compatibility (EMC) - Product family standard for machine tools Part 2: Immunity |
|
CENELEC EN 60603-2 |
Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 2: Detail Specification for Two-Part Connectors with Assessed Quality, for Printed Boards, for Basic Grid of 2,54 mm (0,1 in) with Common Mounting Features-Includes amendment A1:2005; IEC 60603-2:1995 + A1: 2000 |
|
CENELEC EN 60870-2-1 |
Telecontrol Equipment and Systems Part 2: Operating Conditions Section 1: Power Supply and Electromagnetic Compatibility-IEC 870-2-1 : 1995 |
|
CENELEC EN 60917-2-2 |
Modular Order for the Development of Mechanical Structures for Electronic Equipment Practices Part 2: Sectional Specification - Interface Co-Ordination Dimensions for the 25 mm Equipment Practice Section 2: Detail Specification - Dimensions for Subracks, Chassis, Backplanes, Front Panels and Plug-In Units-IEC 917-2-2: 1994 |
|
CENELEC EN 61000-2-9 |
Electromagnetic Compatibility (EMC) Part 2: Environment Section 9: Description of HEMP Environment - Radiated Disturbance Basic EMC Publication-IEC 1000-2-9 : 1996 |
|
CENELEC EN 61000-4-17 |
Electromagnetic compatibility (EMC) Part 4-17: Testing and measurement techniques Ripple on d.c. input power port immunity test-Includes amendment A1:2004; IEC 61000-4-17:1999 |
|
CENELEC EN 61071-1 |
Power Electronic Capacitors Part 1: General-IEC 1071-1: 1991, Modified |
|
CENELEC EN 61158-4 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems Part 4: Data link protocol specification-IEC 61158-4:2003 + corrigendum 2004; Partially supersedes EN 50170:1996 + A1:2002 + A2:1999 + A3:2002 and EN 50254:1998 |
|
CENELEC EN 61340-5-2 |
Electrostatics - Part 5-2: Protection of Electronic Devices from Electrostatic Phenomena - User Guide-IEC 61340-5-2:1999 |
|
CENELEC EN 61965 |
Mechanical Safety of Cathode Ray Tubes-IEC 61965: 2000 |
|
CENELEC EN 61966-2-1 |
Multimedia Systems and Equipment - Colour Measurement and Management Part 2-1: Colour Management - Default RGB Colour Space - sRGB-Includes amendment A1:2003; IEC 61966-2-1: 1999 + A1:2003 |
|
CEN EN ISO 12048 |
Packaging - Complete, Filled Transport Packages - Compression and Stacking Tests Using a Compression Tester-ISO 12048:1994; Supersedes EN 22872:1992 and EN 22874:1992 |
|
CEN EN ISO 8611-1 |
Pallets for materials handling - Flat pallets - Part 1: Test methods-ISO 8611-1:2004 |
|
CEN EN ISO 9241-14 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 14: Menu Dialogues-ISO 9241-14: 1997 |
|
CEN EN 12195-1 |
Load restraint assemblies on road vehicles - Safety - Part 1: Calculation of lashing forces |
|
CEN EN 13414-3 |
Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings |
|
CEN EN 13423 |
Compressed Natural Gas Vehicle Operations |
|
CEN EN 13922 |
Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels |
|
CEN EN 1494 |
Mobile or Movable Jacks and Associated Lifting Equipment-Incorporating Corrigendum April 2001 |
|
CEN EN 1495 |
Lifting platforms Mast climbing work platforms-Includes amendment A1:2003 |
|
CEN EN 1677-3 |
Components for Slings - Safety - Part 3: Forged Steel Self-Locking Hooks - Grade 8 |
|
CEN EN 1677-5 |
Components for Slings - Safety - Part 5: Forged Steel Lifting Hooks with Latch - Grade 4 |
|
CEN EN 1757-2 |
Safety of Industrial Trucks - Pedestrian Propelled Trucks - Part 2: Pallet Trucks |
|
CEN EN 1949 |
Specification for the Installation of LPG Systems for Habitation Purposes in Leisure Accommodation Vehicles and in Other Road Vehicles |
|
CEN EN 2243-2 |
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal |
|
CEN EN 2489 |
Aerospace Series - Fibre Reinforced Plastics - Determination of the Action of Test Fluids |
|
CEN EN 2561 |
Aerospace Series - Carbon Fibre Reinforced Plastics - Unidirectional Laminates - Tensile Test Parallel to the Fibre Direction |
|
CEN EN 2564 |
Aerospace Series - Carbon Fibre Laminates - Determination of the Fibre, Resin and Void Contents |
|
CEN EN 474-2 |
Earth-Moving Machinery - Safety - Part 2: Requirements for Tractor-Dozers |
|
CENELEC EN 50117-2-2 PRAA |
Coaxial cables Part 2-2: Sectional specification for cables used in cabled distribution networks – Outdoor drop cables for systems operating at 5 MHz - 1 000 MHz |
|
CENELEC EN 50117-2-3 |
Coaxial cables Part 2-3: Sectional specification for cables used in cabled distribution networks Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz |
|
CENELEC EN 50117-2-4 |
Coaxial cables Part 2-4: Sectional specification for cables used in cabled distribution networks Indoor drop cables for systems operating at 5 MHz - 3 000 MHz |
|
CENELEC EN 50117-3 |
Coaxial Cables Used in Cabled Distribution Networks Part 3: Sectional Specification for Outdoor Drop Cables |
|
CENELEC EN 50117-5 |
Coaxial Cables Used in Cabled Distribution Networks; Part 5: Sectional Specification for Indoor Drop Cables for Use in Networks Operating at Frequencies between 5 MHz and 2150 MHz |
|
CENELEC EN 50290-2-24 |
Communication Cables Part 2-24: Common Design Rules and Construction - PE Sheathing-Supersedes HD 624.4 S1: 1996 |
|
CENELEC EN 60849 |
Sound Systems for Emergency Purposes-IEC 60849:1998 |
|
CENELEC EN 60872-2 |
Maritime Navigation and Radiocommunication Equipment and Systems - Radar Plotting Aids Part 2: Automatic Tracking Aids (ATA) Methods of Testing and Required Test Results-IEC 60872-2:1999 |
|
CENELEC EN 61000-4-15/A1 |
Electromagnetic compatibility (EMC) Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications-IEC 61000-4-15:1997/A1:2003; Amendment A1; Ratified European Text |
|
CENELEC EN 61000-4-27 |
Electromagnetic Compatibility (EMC) Part 4-27: Testing and Measurement Techniques - Unbalance, Immunity Test-IEC 61000-4-27:2000 |
|
CENELEC EN 61000-4-28 |
Electromagnetic compatibility (EMC) Part 4-28: Testing and measurement techniques Variation of power frequency, immunity test-Includes amendment A1:2004; IEC 61000-4-28:1999 |
|
CENELEC EN 61158-3 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems Part 3: Data link service definition-IEC 61158-3:2003; Partially supersedes EN 50170:1996 + A1:2002 + A2:1999 + A3:2002 and EN 50254:1998 |
|
CENELEC EN 61162-1 |
Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces Part 1: Single Talker and Multiple Listeners-IEC 61162-1: 2000 |
|
CENELEC EN 61491 |
Electrical Equipment of Industrial Machines Serial Data Link for Real-Time Communication between Controls and Drives-IEC 61491:1995, Modified |
|
CENELEC EN 61643-341 |
Components for Low-Voltage Surge Protective Devices - Part 341: Specification for Thyristor Surge Suppressors (TSS)-IEC 61643-341: 2001 |
|
CENELEC EN 61970-301 |
Energy management system application program interface (EMS-API) Part 301: Common Information Model (CIM) Base-IEC 61970-301:2003 |
|
CEN EN 818-2 |
Short Link Chain for Lifting Purposes - Safety - Part 2: Medium Tolerance Chain for Chain Slings - Grade 8 |
|
CEN EN 818-6 |
Short Link Chain for Lifting Purposes - Safety - Part 6: Chain Slings - Specification for Information for Use and Maintenance to Be Provided by the Manufacturer |
|
CEN EN ISO 11146-1 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams-ISO 11146-1:2005 |
|
CEN EN 12158-1 |
Builders Hoists for Goods - Part 1: Hoists with Accessible Platforms |
|
CEN EN 12312-5 |
Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment |
|
CEN EN 1306 |
Inland Navigation Vessels - Connections for the Discharge of Waste Water |
|
CEN EN 13411-5 |
Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
|
CEN EN 13429 |
Packaging - Reuse |
|
CEN EN 13430 |
Packaging - Requirements for Packaging Recoverable by Material Recycling |
|
CEN EN 1621-1 |
Motorcyclists´ Protective Clothing Against Mechanical Impact - Part 1: Requirements and Test Methods for Impact Protectors |
|
CEN EN 2155(PART 9) |
Test Methods for Transparent Materials for Aircraft Glazing Part 9: Determination of Haze |
|
CEN EN 2157-2 |
Aerospace Series Steel Forging Stock and Forgings Technical Specification Part 2 - Forging Stock |
|
CEN EN 2243-4 |
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 4: Metal-honeycomb core flatwise tensile test |
|
CEN EN 2561 |
Aerospace Series - Carbon Fibre Reinforced Plastics - Unidirectional Laminates - Tensile Test Parallel to the Fibre Direction |
|
CEN EN 2591-6101 |
Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 6101: Optical Elements - Visual Examination |
|
CEN EN 2744 |
Non Metallic Materials - Preferred Test Temperatures |
|
CEN EN 3726 |
Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification: 1 100 MPa (at ambient temperature) / 425 degrees C |
|
CEN EN 4113 |
Aerospace Series - Clamps, Loop ( |
|
CENELEC EN 50117-4 |
Coaxial Cables Used in Cabled Distribution Networks Part 4: Sectional Specification for Distribution and Trunk Cables |
|
CENELEC EN 50117-6 |
Coaxial Cables Used in Cabled Distribution Networks; Part 6: Sectional Specification for Outdoor Drop Cables for Use in Networks Operating at Frequencies between 5 MHz and 2150 MHz |
|
CENELEC EN 50248 |
Characteristics of DAB Receivers |