|
CENELEC EN 60079-0 |
Electrical apparatus for explosive gas atmospheres Part 0: General requirements-IEC 60079-0:2004 |
|
CENELEC EN 60204-1 |
Safety of Machinery - Electrical Equipment of Machines Part 1: General Requirements-IEC 60204-1:2005, modified |
|
CENELEC EN 60529 |
Degrees of Protection Provided by Enclosures (IP Code)-Includes Amendment 1: 02/2000; Supersedes HD 365 S3: 1985; IEC 60529: 1989 + A1: 1999 |
|
CENELEC EN 60079-15 |
Electrical apparatus for explosive gas atmospheres Part 15: Construction, test and marking of type of protection |
|
CENELEC EN 60079-7 |
Electrical apparatus for explosive gas atmospheres Part 7: Increased safety |
|
CENELEC EN 60079-11 |
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety |
|
CENELEC EN 61000-4-2 |
Electromagnetic Compatibility (EMC) - Part 4.2: Testing and Measurement Techniques - Electrostatic Discharge Immunity Test-Includes Amendments A1:1998 and A2:2001; IEC 61000-4-2:1995 + A1:1998 + A2:2000 |
|
CENELEC EN 60947-1 |
Low-voltage switchgear and controlgear Part 1: General rules |
|
CENELEC EN 50014 |
Electrical Apparatus for Potentially Explosive Atmospheres General Requirements-Includes Amendments A1:1999 and A2:1999; Incorporates Corrigenda September 1997 and April 1998; SUPERSEDED BY EN 60079-0:2004 |
|
CENELEC EN 60664-1 |
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
|
CENELEC EN 61000-3-3 |
Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 3: Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public Low-Voltage Supply Systems, for Equipment with Rated Current Less Than or Equal to 16 A per Phase and Not Subject to Conditional Connection-Includes Amendment A1: 2001, Amendment A2: 2006; Supersedes EN 60555-3: 1987 and Its Amendment (Includes Corrigendum July 1997) |
|
CENELEC EN 60079-26 |
Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga |
|
CENELEC EN 60598-1 |
Luminaires Part 1: General requirements and tests-Incorporating corrigendum August 2007; Incorporating Amendment A1: 2006 |
|
CENELEC EN 61800-3 |
Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods-IEC 61800-3:2004 |
|
CENELEC HD 21.1 S2/A16 |
AMD 16 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements |
|
CENELEC EN 60439-1 |
Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies-Includes Amendment A1: 2004; Incorporating Corrigendum NO. 1; IEC 60439-1:1999 + A1: 2004 |
|
CENELEC EN 60320-1 |
Appliance Couplers for Household and Similar General Purposes Part 1: General Requirements-IEC 60320-1:2001 |
|
CENELEC EN 60695-10-2 |
Fire hazard testing Part 10-2: Abnormal heat - Ball pressure test-IEC 60695-10-2:2003 |
|
CENELEC EN 60947-5-1 |
Low-Voltage Switchgear and Controlgear Part 5-1: Control Circuit Devices and Switching Elements Electromechanical Control Circuit Devices-IEC 60947-5-1:2003; Incorporates Corrigendum November 2004 |
|
CENELEC EN 60695-2-11 |
Fire Hazard Testing Part 2-11: Glowing/Hot-Wire Based Test Methods - Glow-Wire Flammability Test Method for End-Products-IEC 60695-2-11:2000; Supersedes EN 60695-2-1/1:1996 |
|
CENELEC EN 60947-4-1 |
Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters-Amendment A1: December 2002; A2: September 2005; IEC 60947-4-1: 2000 |
|
CENELEC EN 61058-1 |
Switches for Appliances Part 1: General Requirements-IEC 61058-1: 2000 + A1: 2001, Modified |
|
CENELEC EN 61508-1 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems Part 1: General Requirements-IEC 61508-1: 1998 + Corrigendum 1999 |
|
CENELEC EN 60034-1 |
Rotating electrical machines Part 1: Rating and performance-IEC 60034-1:2004 |
|
CENELEC EN 60079-2 |
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure |
|
CENELEC EN 50281-1-1 |
Electrical apparatus for use in the presence of combustible dust Part 1-1: Electrical apparatus protected by enclosures Construction and testing-Includes amendment A1: 2002; Includes Corrigendum August 1999 |
|
CENELEC EN 50130-4 |
Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems-Includes amendments A1:1998 and A2:2003; Incorporating corrigendum March 2003 |
|
CENELEC EN 61241-1 |
Electrical apparatus for use in the presence of combustible dust Part 1: Protection by enclosures |
|
CENELEC EN 60947-7-1 |
Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment Terminal blocks for copper conductors-IEC 60947-7-1:2002 |
|
CENELEC EN 60079-14 |
Electrical Apparatus for Explosive Gas Atmospheres Part 14: Electrical Installations in Hazardous Areas (Other than Mines)-IEC 60079-14: 2002 |
|
CENELEC EN 60112 |
Method for the determination of the proof and the comparative tracking indices of solid insulating materials-IEC 60112:2003; Supersedes HD 214 S2:1980; Incorporating Corrigendum June 2003 |
|
CENELEC EN 61496-1 |
Safety of Machinery - Electro-Sensitive Protective Equipment Part 1: General Requirements and Tests-IEC 61496-1:2004, modified |
|
CENELEC EN 50178 |
Electronic Equipment for Use in Power Installations-Incorporating Corrugendum N0.1 |
|
CEN EN 60079-25 |
Electrical apparatus for explosive gas atmospheres Part 25: Intrinsically safe systems-Incorporates Corrigendum April 2006; (IEC 60079-25:2003) |
|
CENELEC EN 60947-2 |
Low-voltage switchgear and controlgear Part 2: Circuit-breakers-IEC 60947-2:2006 |
|
CENELEC EN 61810-1 |
Electromechanical elementary relays Part 1: General and safety requirements-IEC 61810-1:2003; Supersedes EN 61810-1:1998 and EN 61810-5:1998 |
|
CENELEC EN 60034-5 |
Rotating Electrical Machines Part 5: Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code) - Classification-includes Amd A1: 1/2007; IEC 60034-5:2000 |
|
CENELEC EN 60695-2-12 |
Fire Hazard Testing Part 2-12: Glowing/Hot-Wire Based Test Methods - Glow-Wire Flammability Test Method for Materials-IEC 60695-2-12:2000; Supersedes EN 60695-2-1/2:1996 |
|
CENELEC EN 60079-10 |
Electrical Apparatus for Explosive Gas Atmospheres Part 10: Classification of Hazardous Areas-IEC 60079-10:2002 |
|
CENELEC EN 60695-2-10 |
Fire Hazard Testing Part 2-10: Glowing/Hot-Wire Based Test Methods - Glow-Wire Apparatus and Common Test Procedure-IEC 60695-2-10:2000; Supersedes EN 60695-2-1/0:1996 |
|
CENELEC EN 61140 |
Protection Against Electric Shock - Common Aspects for Installation and Equipment-IEC 61140: 2001 |
|
CENELEC EN 60034-14 |
Rotating electrical machines Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity-Incorporates Amendment A1: June 2007 |
|
CENELEC HD 22.2 S2/A11 |
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods |
|
CENELEC EN 62061 |
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems-Incorporating Corrigendum July 2005; IEC 62061:2005 |
|
CENELEC EN 61779-1 |
Electrical Apparatus for the Detection and Measurement of Flammable Gasesm Part 1: General Requirements and Test Methods-IEC 61779-1:1998 Modified; Includes Amendment A11:2004 |
|
CENELEC EN 61310-1 |
Safety of Machinery Indication, Marking and Actuation Part 1: Requirements for Visual, Auditory and Tactile Signals (IEC 1310-1 : 1995) |
|
CENELEC EN 61800-1 |
Adjustable Speed Electrical Power Drive Systems Part 1: General Requirements Rating Specifications for Low Voltage Adjustable Speed D.C. Power Drive Systems-IEC 61800-1:1997 |
|
CENELEC EN 62040-2 |
Uninterruptible power systems (UPS) Part 2: Electromagnetic compatibility (EMC) requirements-Incorporating corrigendum November 2006 |
|
CENELEC EN 60309-1 |
Plugs, Socket-Outlets and Couplers for Industrial Purposes Part 1: General Requirements-Incorporating Amendment A11: May 2004 and Amendment A1: April 2007 |
|
CENELEC EN 60947-5-5 |
Low-Voltage Switchgear and Controlgear Part 5-5: Control Circuit Devices and Switching Elements Electrical Emergency Stop Devices with Mechanical Latching Function-IEC 60947-5-5:1997; A1: April 2005 |
|
CENELEC EN 50075 |
Flat Non-Wirable Two-Pole Plugs, 2,5 A 250 V, with Cord, for the Connection of Class II-Equipment for Household and Similar Purposes-Incorporating Corrigendum No. 1 |
|
CENELEC EN 50160 |
Voltage characteristics of electricity supplied by public distribution networks |
|
CENELEC EN 60695-11-10 |
Fire hazard testing Part 11-10: Test flames 50 W horizontal and vertical flame test methods-Includes amendment A1:2003; IEC 60695-11-10:1999 + A1:2003; Partly supersedes HD 441 S1:1983 |
|
CENELEC EN 60085 |
Electrical insulation - Thermal classification-IEC 60085:2004; Supersedes HD 566 S1:1990 |
|
CENELEC EN 60127-2 |
Miniature fuses Part 2: Cartridge fuse-links-Including Amendment A1; 2003, IEC 60127-2; 2003 + A1: 2003, modified |
|
CENELEC EN 61508-4 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems Part 4: Definitions and Abbreviations-IEC 61508-4: 1998 + Corrigendum 1999 |
|
CENELEC EN 61558-2-6 |
Safety of Power Transformers, Power Supply Units and Similar Part 2-6: Particular Requirements for Safety Isolating Transformers for General Use-Partly Supersedes EN 60742: 1995; IEC 61558-2-6: 1997 |
|
CENELEC EN 61800-5-1 |
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy |
|
CENELEC EN 50019 |
Electrical Apparatus for Potentially Explosive Atmospheres Increased Safety |
|
CENELEC EN 60617-2 |
Graphical Symbols for Diagrams Part 2: Symbol Elements, Qualifying Symbols and Other Symbols Having General Application-IEC 617-2: 1996 |
|
CENELEC EN 60669-1 |
Switches for household and similar fixed-electrical installations — Part 1: General requirements-includes amendment A1: 2002; Incorporating corrigendum: January 2007 |
|
CENELEC EN 62133 |
Secondary cells and batteries containing alkaline or other non-acid elecrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications-IEC 62134-1: 2002; Supersedes EN 61809: 2000; Partially Supersedes EN 61960-1: 2001 and EN 61960-2: 2001 |
|
CENELEC HD 21.5 S2/ A4 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 5: Flexible Cables (Cords) |
|
CENELEC EN 50016 |
Electrical Apparatus for Potentially Explosive Atmospheres - Pressurized Apparatus |
|
CENELEC EN 60617-7 |
Graphical Symbols for Diagrams Part 7: Switchgear, Controlgear and Protective Devices-IEC 617-7: 1996 |
|
CENELEC EN 60695-11-5 |
Fire hazard testing Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance-IEC 60695-11-5:2004 |
|
CENELEC EN 60695-2-13 |
Fire Hazard Testing Part 2-13: Glowing Hot-Wire Based Test Methods - Glow-Wire Ignitability Test Method for Materials-IEC 60695-2-13:2000; Supersedes EN 690695-2-1/3:1996 |
|
CENELEC EN 60079-17 |
Electrical apparatus for explosive gas atmospheres Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)-IEC 60079-17:2002 |
|
CENELEC EN 50021 |
Electrical Apparatus for Potentially Explosive Atmospheres - Type of Protection |
|
CENELEC EN 50423-3 |
Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV Part 3: Set of National Normative Aspects-Incorporating Corrigendum April 2005 |
|
CENELEC EN 60079-27 |
Electrical apparatus for explosive gas atmospheres Part 27: Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO)-IEC 60079-27:2005 |
|
CENELEC EN 60950-22 |
Information technology equipment - Safety Part 22: Equipment installed outdoors-IEC 60950-22:2005 |
|
CENELEC EN 60598-2-1 |
Luminaires Part 2: Particular Requirements Section One - Fixed General Purpose Luminaires |
|
CENELEC EN 60598-2-18 |
Luminaires Part 2: Particular Requirements Section 2.18: Luminaires for Swimming Pools and Similar Applications-IEC 598-2-18: 1993, Modified |
|
CENELEC EN 61241-4 |
Electrical apparatus for use in the presence of combustible dust Part 4: Type of protection |
|
CEN EN 12601 |
Reciprocating Internal Combustion Engine Driven Generating Sets - Safety |
|
CENELEC EN 61347-2-8 |
Lamp controlgear Part 2-8: Particular requirements for ballasts for fluorescent lamps-Incorporating Corrigendum July 2003; Includes Amendment A1: 02/2006;: 1991 |
|
CENELEC EN 60127-1 |
Miniature fuses Part 1: Definitions for miniature fuses and general requirements for minature fuse-links |
|
CENELEC EN 61204-7 |
Low voltage power supplies, d.c. output Part 7: Safety requirements-IEC 61204-7:2006 |
|
CENELEC EN 60204-1/ A1 |
AMD 1 Electrical Equipment of Industrial Machines - Part 1: General Requirements; |
|
CENELEC EN 60664-3 |
Insulation coordination for equipment within low-voltage systems Part 3: Use of coating, potting or moulding for protection against pollution-IEC 60664-3:2003 |
|
CENELEC EN 50017 |
Electrical Apparatus for Potentially Explosive Atmospheres - Powder Filling |
|
CENELEC EN 60664-4 |
Insulation coordination for equipment within low-voltage systems Part 4: Consideration of high-frequency voltage stress-Incorporating Corrigendum October 2006; IEC 60664-4:2005 |
|
CENELEC EN 61082-1 |
Preparation of documents used in electrotechnology Part 1: Rules-IEC 61082-1:2006; Supersedes EN 61082-2:1994, EN 61082-3:1994 and EN 61082-4:1996 |
|
CENELEC EN 50303 |
Group I, Category M1 Equipment Intended to Remain Functional in Atmospheres Endangered by Firedamp and/or Coal Dust |
|
CENELEC EN 60034-3 |
Rotating electrical machines Part 3: Specific requirements for cylindrical rotor synchronous machines-IEC 60034-3:2005 |
|
CENELEC EN 60998-1 |
Connecting devices for low-voltage circuits for household and similar purposes Part 1: General requirements-IEC 60998-1:2002, modified |
|
CENELEC EN 62305-1 |
Protection against lightning Part 1: General principles-IEC 62305-1:2006 |
|
CEN EN 13237 |
Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
|
CENELEC EN 60034-2 |
Rotating Electrical Machines Part 2: Methods for Determining Losses and Efficiency of Rotating Electrical Machinery from Tests (Excluding Machines for Traction Vehicles)-Includes A1 and A2: November 1996; IEC 34-2:1972 + IEC 34-2A:1974 + A1:1995 + A2:1996; Supersedes HD 53.2 S1:1974 |
|
CENELEC EN 60073 |
Basic and Safety Principles for Man-Machine Interface, Marking and Identification - Coding Principles for Indication Devices and Actuators-IEC 60073: 2002 |
|
CENELEC EN 60076-1 |
Power transformers Part 1: General-Includes Amendments A11:1997, A1:2000 and A12:2002; IEC 60076-1:1993 + A1:1999 |
|
CENELEC EN 60146-1-1 |
Semiconductor Convertors General Requirements and Line Commutated Convertors Part 1-1: Specifications of Basic Requirements-IEC 60146-1-1: 1991 Including A1: 1996; Partly Superseded EN 50328:2003 |
|
CENELEC EN 60947-4-3 |
Low-Voltage Switchgear and Controlgear Part 4.3: Contactors and Motor-Starters AC Semiconductor Controllers and Contactors for Non-Motor Loads-Incorproates Amendment A1: December 2006 |
|
CENELEC EN 61558-2-4 |
Safety of Power Transformers, Power Supply Units and Similar Part 2-4: Particular Requirements for Isolating Transformers for General Use-Partly Supersedes EN 60742: 1995; IEC 61558-2-4: 1997 |
|
CENELEC EN 61643-11 |
Low-Voltage Surge Protective Devices Part 11: Surge Protective Devices Connected to Low-Voltage Power Systems - Requirements and Tests-Incorporates amendment A11: 1/2007 |
|
CENELEC EN 61346-1 |
Industrial Systems, Installations and Equipment and Industrial Products Structuring Principles and Reference Designations Part 1: Basic Rules (IEC 1346-1 : 1996) |
|
CENELEC EN 61779-4 |
Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 4: Performance Requirements for Group II Apparatus Indicating a Volume Fraction Up to 100% Lower Explosive Limit-Supersedes EN 50057:1998; IEC 61779-4:1998, Modified |
|
CENELEC EN 62040-1-1 |
Uninterruptible power systems (UPS) Part 1-1: General and safety requirements for UPS used in operator access areas-IEC 62040-1-1: 2002 + corrigendum 2002 + corrigendum 2004; Supersedes EN 50091-1-1: 1996 |
|
CENELEC EN 50110-1 |
Operation of Electrical Installations |
|
CENELEC EN 50419 |
Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE) |
|
CENELEC EN 60034-12 |
Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors-Incorporates Amendment A1:2007 |
|
CENELEC EN 60309-2 |
Plugs, socket-outlets and couplers for industrial purposes — Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories-Incorporates Amendment A1: 5/2004; A11: 4/2007 |
|
CENELEC EN 62305-4 |
Protection against lightning Part 4: Electrical and electronic systems within structures-IEC 62305-4:2006 |
|
CENELEC EN 60034-22 |
Rotating Electrical Machines Part 22: AC Generators for Reciprocating Internal Combustion (RIC) Engine Driven Generating Sets-IEC 34-22:1996 |
|
CENELEC EN 60034-7 |
Rotating Electrical Machines - Part 7: Classification of Types of Construction, Mounting Arrangements and Twerminal Box Position (IM Code)-Includes Amendment A1:2001; IEC 60034-7:1992; Supersedes HD 53.7 S1 : 1974 |
|
CENELEC EN 60799 |
Electrical Accessories Cord Sets and Interconnection Cord Sets-IEC 60799:1998; Supersedes EN 60799:1987 + A1:1994 |
|
CENELEC EN 61347-1 |
Lamp controlgear Part 1: General and safety requirements-IEC 61347-1:2000; Incorporating Corrigendum July 2003 |
|
CENELEC HD 22.4 S2/ A6 |
AMD 6 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 4: Cords and Flexible Cables |
|
CENELEC EN 50039 |
Electrical Apparatus for Potentially Explosive Atmospheres: Intrinsically Safe Electrical Systems ´I´ |
|
CENELEC EN 50102 |
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)-Includes amendment A1:1998 |
|
CENELEC EN 60034-4 |
Rotating Electrical Machines Part 4: Methods for Determining Synchronous Machine Quantities from Tests-IEC 34-4: 1985, Modified; Supersedes HD 53.4.S2: 1988 |
|
CENELEC EN 50015 |
Electrical Apparatus for Potentially Explosive Atmospheres - Oil Immersion |
|
CENELEC EN 60034-6 |
Rotating Electrical Machines Part 6: Methods of Cooling (IC Code) (IEC 34-6 : 1991) |
|
CENELEC EN 61241-10 |
Electrical apparatus for use in the presence of combustible dust Part 10: Classification of areas where combustible dusts are or may be present-IEC 61241-10:2004; Supersedes EN 50281-3:2002 |
|
CENELEC EN 60034-8 |
Rotating electrical machines - Part 8: Terminal markings and direction of rotation |
|
CENELEC EN 61241-18 |
Electrical apparatus for use in the presence of combustible dust Part 18: Protection by encapsulation |
|
CENELEC EN 60034-11 |
Rotating electrical machines Part 11: Thermal protection-IEC 60034-11:2004 |
|
CENELEC EN 61558-2-1 |
Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications |
|
CENELEC EN 50110-2 |
Operation of Electrical Installations (National Annexes) |
|
CENELEC EN 50126-1 |
Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Part 1: Basic requirements and generic process-Incorporating corrigendum May 2006 |
|
CENELEC EN 50281-1-2 |
Electrical apparatus for use in the presence of combustible dust Part 1-1: Electrical apparatus protected by enclosures Selection and installation and maintenance-Includes amendment A1: 2002; Incorporates Corrigenda August 1999 and December 1999; Partially superseded by EN 61241-14:2004 |
|
CENELEC EN 60034-9 |
Rotating Electrical Machines Part 9: Noise Limits-Incorporates Amendment 1: 2007 |
|
CEN EN 60228 |
Conductors of insulated cables-IEC 60228:2004; Supersedes HD 383 S2:1986 + A1:1989 + A2:1993 |
|
CENELEC EN 60947-5-2 |
Low-Voltage Switchgear and Controlgear Part 5-2: Control Circuit Devices and Switching Elements Proximity Switches-Includes Amendment A1:1999 and A2: 2004; IEC 60947-5-2:1997, Modified + A1:1999 + A2:2004 |
|
CENELEC EN 60947-6-1 |
Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment - Transfer switching equipment |
|
CENELEC EN 61547 |
Equipment for General Lighting Purposes EMC Immunity Requirements-Includes Amendment A1:2000; IEC 61547: 1995 + A1:2000 |
|
CENELEC EN 61558-2-7 |
Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys |
|
CENELEC EN 62305-3 |
Protection against lightning Part 3: Physical damage to structures and life hazard-IEC 62305-3:2006 |
|
CENELEC EN 60034-15 |
Rotating Electrical Machines - Part 15: Impulsive Voltage Withstand Levels of Rotating a.c. Machines with Form-Wound Stator Coils (IEC 34-15 : 1995) |
|
CENELEC EN 60034-18-1 |
Rotating Electrical Machines Part 18: Functional Evaluation of Insulation Systems Section 1: General Guidelines-Includes Amendment A1: 1996; IEC 34-18-1: 1992 + Corrigendum 1992 + A1: 1996 |
|
CENELEC EN 60691 |
Thermal-links Requirements and application guide-Includes Amendment A1: January 2007 |
|
CENELEC EN 61241-11 |
Electrical apparatus for use in the presence of combustible dust Part 11: Protection by intrinsic safety |
|
CENELEC EN 61558-2-17 |
Safety of Power Transformers, Power Supply Units and Similar Part 2-17: Particular Requirements for Transformers for Switch Mode Power Supplies-IEC 61558-2-17: 1997 |
|
CENELEC HD 21.13 S1 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 13: Oil Resistant PVC Sheathed Cables with Two or More Conductors |
|
CENELEC CLC/TR 62102 |
Electrical safety - Classification of interfaces for equipment to be connected to information and ommunications technology networks |
|
CENELEC EN 60947-3 |
Low-Voltage Switchgear and Controlgear Part 3: Switches, Disconnectors, Switch-Disconnectors and Fuse-Combination Units-Includes Amendment A1: 2001; Incorporating Corrigendum August 2001; Includes amendment A2:2005; IEC 60947-3: 1999 + A1: 2001 |
|
CENELEC EN 62305-2 |
Protection against lightning Part 2: Risk management-IEC 62305-2:2006 |
|
CENELEC EN 60216-4-1 |
Electrical insulating materials - Thermal endurance properties Part 4-1: Ageing ovens - Single-chamber ovens-IEC 60216-4-1:2006;:1992 |
|
CENELEC EN 60255-6 |
Electrical Relays Part 6: Measuring Relays and Protection Equipment (IEC 255-6 : 1988, Modified) |
|
CENELEC EN 60320-2-2 |
Appliance Couplers for Household and Similar General Purposes Part 2-2: Interconnection Couplers for Household and Similar Equipment-IEC 60320-2-2:1998 |
|
CENELEC EN 60445 |
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and conductor terminations |
|
CENELEC EN 61210 |
Connecting Devices Flat Quick-Connect Terminations for Electrical Copper Conductors Safety Requirements (IEC 1210 : 1993, Modified) |
|
CENELEC EN 61857-1 |
Electrical insulation systems Procedures for thermal evaluation Part 1: General requirements Low-voltage-IEC 61857-1:2004 |
|
CEN EN 13160-1 |
Leak detection systems - Part 1: General principles |
|
CENELEC EN 60598-2-4 |
Luminaires Part 2: Particular Requirements Section 4: Portable General Purpose Luminaires-IEC 60598-2-4:1997 |
|
CENELEC EN 60617-3 |
Graphical Symbols for Diagrams Part 3: Conductors and Connecting Devices-IEC 617-3: 1996 |
|
CENELEC EN 60947-4-2 |
Low-voltage switchgear and controlgear — Part 4-2: Contactors and motor-starters — AC semiconductor motor controllers and starters-Includes amendment A1: March 2002; Amendment 2: December 2006 |
|
CENELEC EN 61346-2 |
Industrial Systems, Installations and Equipment and Industrial Products Structuring Principles and Reference Designations Part 2: Classification of Objects and Codes for Classes-IEC 61346-2:2000 |
|
CENELEC EN 60079-28 |
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
|
CENELEC EN 60598-2-22 |
Luminaires - Part 2-22: Particular Requirements - Luminaires for Emergency Lighting-Amendment A1:2003; Incorporating Corrigenda December 2005 and October 2007 |
|
CENELEC EN 60947-7-2 |
Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors-IEC 60947-7-2:2002 |
|
CENELEC EN 60998-2-1 |
Connecting Devices for Low Voltage Circuits for Household and Similar Purposes Part 2-1: Particular Requirements for Connecting Devices as Separate Entities with Screw-Type Clamping Units-IEC 60998-2-1:2002, Modified |
|
CENELEC EN 61310-2 |
Safety of Machinery Indication, Marking and Actuation Part 2: Requirements for Marking (IEC 1310-2 : 1995) |
|
CENELEC EN 60086-1 |
Primary Batteries Part 1: General-IEC 60086-1:2000 |
|
CENELEC EN 60127-6 |
Miniature fuses Part 6: Fuse-holders for miniature cartridge fuse-links-Includes amendment A1:1996 and A2:2003; IEC 60127-6:1994 + A1:1996 + A2 2002; Supersedes EN 60257: 1990 |
|
CENELEC EN 60598-2-20 |
Luminaires Part 2: Particular requirements Section 20: Lighting chains-Includes amendment A1:1998 and A2:2004; IEC 60598-2-20:1996 + A1:1998 + A2:2004, modified |
|
CENELEC EN 60617-8 |
Graphical Symbols for Diagrams Part 8: Measuring Instruments, Lamps and Signalling Devices-IEC 617-8: 1996 |
|
CENELEC EN 60934 |
Circuit-Breakers for Equipment (CBE)-Incorporates Amendment A1: February 2007 |
|
CENELEC EN 61340-5-1 |
Electrostatics - Part 5-1: Protection of Electronic Devices from Electrostatic Phenomena - General Requirements-IEC 61340-5-1:1998 + Corrigendum 1999 |
|
CENELEC EN 61779-3 |
Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 3: Performance Requirements for Group I Apparatus Indicating a Volume Fraction Up to 100% Methane in Air-Supersedes EN 50056:1998; IEC 61779-3:1998, Modified |
|
CENELEC EN 61951-2 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes Portable sealed rechargeable single cells Part 2: Nickel-metal hydride-IEC 61951-2: 2003; Supersedes EN 61436:1998, EN 61808:2000 & EN 61951-2:2001 |
|
CENELEC EN 50083-2 |
Cable networks for television signals, sound signals and interactive services Part 2: Electromagnetic compatibility for equipment |
|
CENELEC EN 50121-3-2 |
Railway applications - Electromagnetic compatibility Part 3-2: Rolling stock - Apparatus |
|
CENELEC EN 60127-3 |
Miniature fuses Part 3: Sub-miniature fuse-links-Includes amendment A2:2003; IEC 60127-3:1988 + A1:1991 + A2:2002 |
|
CENELEC EN 60204-32 |
Safety of Machinery - Electrical Equipment of Machines Part 32: Requirements for Hoisting Machines-IEC 60204-32:1998 |
|
CENELEC EN 60216-1 |
Electrical Insulating Materials - Properties of Thermal Endurance Part 1: Ageing Procedures and Evaluation of Test Results-IEC 60216-1:2001 |
|
CENELEC EN 62040-3 |
Uninterruptible Power Systems (UPS) - Part 3: Method of Specifying the Performance and Test Requirements-Supersedes ENV 50091-3:1998; IEC 62040-3:1999, Modified |
|
CENELEC EN 60034-16-1 |
Rotating Electrical Machines Part 16: Excitation Systems for Synchronous Machines Chapter 1: Definitions (IEC 34-16-1 : 1991 + Corrigendum 1992) |
|
CENELEC EN 60034-18-22 |
Rotating Electrical Machines Part 18-22: Functional Evaluation of Insulation Systems - Test Procedures for Wire-Wound Windings - Classification of Changes and Insulation Component Substitutions-IEC 60034-18-22:2000 |
|
CENELEC EN 60086-4 |
Primary Batteries Part 4: Safety Standard for Lithium Batteries-IEC 60086-4: 2000 |
|
CENELEC EN 60742 |
Isolating Transformers and Safety Isolating Transformers Requirements-IEC 742 : 1983 + A1 : 1992, Modified; Partly Superseded by EN 61558-1: 1997, EN 61558-2-4: 1997, EN 61 558-2-6: 1997 and EN 61 558-2-7: 1997 |
|
CENELEC EN 61204 |
Low-Voltage Power Supply Devices, d.c. Output - Performance Characteristics-Includes Amendment A1: 2001; IEC 61204: 1993, Modified + A1: 2001 |
|
CENELEC EN 61347-2-3 |
Lamp controlgear Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps-Includes amendment A1:2004; IEC 61347-2-3:2000 + A1:2004; Supersedes EN 60928:1995; Corr July 2003; A1:September 2004; A2: February 2006 |
|
CEN EN 1760-1 |
Safety of Machinery - Pressure Sensitive Protective Devices - Part 1: General Principles for the Design and Testing of Pressure Sensitive Mats and Pressure Sensitive Floors |
|
CENELEC EN 60034-26 |
Rotating electrical machines Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors |
|
CENELEC EN 60076-2 |
Power Transformers Part 2: Temperature Rise-Supersedes HD 398.2 S1: 1980 and Its Amendment; IEC 76-2: 1993, Modified |
|
CENELEC EN 60076-3 |
Power Transformers Part 3: Insulation Levels, Dielectric Tests and External Clearances in Air-IEC 60076-3:2000 + Corrigendum 2000; Supersedes HD 398.3 S1:1986 + A1:1995 |
|
CENELEC EN 60598-2-3 |
Luminaires Part 2-3: Particular requirements - Luminaires for road and street lighting-Incorporating Corrigendum August 2005; IEC 60598-2-3: 2002 |
|
CENELEC EN 60598-2-8 |
Luminaires - Part 2: Particular Requirements - Section 8: Handlamps-Includes Amendment A1:2000; IEC 598-2-8:1996 + A1:2000, Modified |
|
CENELEC EN 60921 |
Ballasts for tubular fluorescent lamps - Performance requirements-Includes Amendment A1; June 2006; IEC 60921:2004 |
|
CENELEC EN 61558-2-13 |
Safety of Power Transformers, Power Supply Units and Similar Devices Part 2-13: Particular Requirements for Auto-Transformers for General Use-IEC 61558-2-13: 1999 |
|
CENELEC EN 61558-2-5 |
Safety of power transformers, power supply units and similar Part 2-5: Particular requirements for shaver transformers and shaver supply units-Includes amendment A11:2004; IEC 61558-2-5:1997; Partly supersedes EN 60742:1995 |
|
CENELEC EN 61558-2-8 |
Safety of Small Power Transformers, Power Supply Units and Similar Part 2-8: Particular Requirements for Bell and Chime Transformers-IEC 61558-2-8:1998; Supersedes EN 60742:1995 |
|
CENELEC CLC/TS 60034-25 |
Rotating electrical machines Part 25: Guide for the design and performance of cage induction motors specifically designed for converter supply |
|
CENELEC EN 50022 |
Low Voltage Switchgear and Controlgear for Industrial Use Mounting Rails Top Hat Rails 35 mm Wide for Snap-on Mounting of Equipment |
|
CEN EN 60068-2-80 |
Environmental testing Part 2-80: Tests Test Fi: Vibration Mixed mode-IEC 60068-2-80:2005 |
|
CENELEC EN 60204-11 |
Safety of Machinery - Electrical Equipment of Machines - Part 11: Requirements for HV Equipment for Voltages Above 1 000 V A.C. or 1 500 V D.C. and Not Exceeding 36kV-IEC 60204-11: 2000 (F) |
|
CENELEC EN 60204-31 |
Safety of machinery Electrical equipment of machines Part 31: Particular safety and EMC requirements for sewing machines, units and systems-IEC 60204-31:1996, Modified; Supersedes EN 60204-3-1:1990; Incorporating Corrigendum August 2000 |
|
CENELEC EN 60243-1 |
Electrical Strength of Insulating Materials - Test Methods Part 1: Tests at Power Frequencies-IEC 60243-1:1998; Supersedes HD 559.1 S1:1991 |
|
CENELEC EN 60352-3 |
Solderless Connections Part 3: Solderless Accessible Insulation Displacement Connections - General Requirements, Test Methods and Practical Guidance (IEC 352-3: 1993) |
|
CENELEC EN 60694 |
Common specifications for high-voltage switchgear and controlgear standards-Includes Amendments A1:2000 and A2:2001; IEC 60694:1996 + A1:2000 + A2:2001 + Corrigendum 2001 + Corrigendum 2001; Incorporates Corrigenda April 1998 and May 1999 |
|
CENELEC EN 60999-1 |
Connecting Devices - Electrical Copper Conductors Safety Requirements for Screw-Type and Screwless-Type Clamping Units Part 1: General Requirements and Particular Requirements for Clamping Units for Conductors from 0,2 mm2 up to 35 mm2 (Included)-IEC 60999-1:1999 |
|
CENELEC EN 61008-1 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) Part 1: General rules-Incorporates Amendment A11: 08/2007 |
|
CENELEC EN 61347-2-1 |
Lamp controlgear Part 2-1: Particular requirements for starting devices (other than glow starters)-Includes amendment A1: 3/2006; Incorporating Corrigendum July 2003 and November 2006 |
|
CENELEC EN 61557-1 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements |
|
CENELEC EN 61558-2-2 |
Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers |
|
CENELEC EN 61779-5 |
Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 5: Performance Requirements for Group II Apparatus Indicating a Volume Fraction Up to 100% Gas-Supersedes EN 50058:1998; IEC 61779-5:1998, Modified |
|
CENELEC EN 62019 |
Electrical Accessories - Circuit-Breakers and Similar Equipment for Household Use - Auxiliary Contact Units-Includes amendments A1:2003 and A11:2005; IEC 62019:1999 + A1:2002 |
|
CENELEC EN 62208 |
Empty enclosures for low-voltage switchgear and controlgear assemblies General requirements-IEC 62208:2002; |
|
CENELEC EN 62271-109 |
High-voltage switchgear and controlgear Part 109: Alternating-current series capacitor by-pass switches |
|
CENELEC EN 50342 |
Lead-Acid Starter Batteries - General Requirements, Methods of Test and Numbering-Includes Amendments A1:2001, A2:2001 and A3:2004; Incorporates Corrigendum March 2003; Supersedes EN 60095-1:1993 |
|
CENELEC EN 60034-18-21 |
Rotating Electrical Machines Part 18: Functional Evaluation of Insulation Systems Section 21: Test Procedures for Wire-Wound Windings - Thermal Evaluation and Classification-Includes Amendments A1: 1996 and A2: 1996; IEC 34-18-21: 1992 + A1: 1996 and A2: 1996 |
|
CENELEC EN 60034-18-31 |
Rotating Electrical Machines Part 18: Functional Evaluation of Insulation Systems Section 31: Test Procedures for Form-Wound Windings - Thermal Evaluation and Classification of Insulation Systems Used in Machines up to and Including 50 MVA and 15 kV-Includes Amendment A1: 1996; IEC 34-18-31: 1992 + A1: 1996 |
|
CENELEC EN 60086-2 |
Primary batteries - Part 2: Physical and electrical specifications |
|
CENELEC EN 60099-1 |
Surge Arresters - Part 1: Non-Linear Resistor Type Gapped Surge Arresters for A.C. Systems-Including Amendment A1:1999; IEC 60099-1:1991 + A1:1999 |
|
CENELEC EN 60332-1-1 |
Tests on electric and optical fibre cables under fire conditions Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus-IEC 60332-1-1:2004; Partially supersedes EN 50265-1:1998 |
|
CENELEC EN 60439-2 |
Low-Voltage Switchgear and Controlgear Assemblies Part 2: Particular Requirements for Busbar Trunking Systems (Busways)-IEC 60439-2:2000; Amd 1:2005 |
|
CENELEC EN 60598-2-12 |
Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights-Incorporating corrigendum December 2006 |
|
CENELEC EN 60598-2-13 |
Luminaires Part 2-13: Particular requirements - Ground recessed luminaires-Incorporating corrigendum December 2006 |
|
CENELEC EN 60598-2-23 |
Luminaires - Part 2-23: Particular Requirements - Extra Low-Voltage Lighting Systems for Filament Lamps-Includes Amendment A1: 2000; IEC 60598-2-23: 1996 + A1: 2000 |
|
CENELEC EN 60598-2-6 |
Luminaires Part 2: Particular Requirements Section 6: Luminaires with Built-In Transformers or Converters for Filament Lamps-Includes Amendment A1: 1997; IEC 598-2-6: 1994 + A1: 1996 |
|
CENELEC EN 60695-1-1 |
Fire Hazard Testing Part 1-1: Guidance for Assessing the Fire Hazard of Electrotechnical Products - General Guidelines-IEC 60695-1-1: 1999 + Corrigendum 2000 |
|
CENELEC EN 60898-1 |
Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations Part 1: Circuit-breakers for a.c. operation-Including Amendment 1: 08/2004, Amendment 11: 09/2005, Corrigendum 02/2004; IEC 60898-1:2002;:1991 |
|
CENELEC EN 60947-5-3 |
Low-Voltage Switchgear and Controlgear - Part 5-3: Control Circuit Devices and Switching Elements - Requirements for Proximity Devices with Defined Behaviour under Fault Conditions (PDF)-Incorporating Amendment A1: 4/2005 |
|
CENELEC EN 61204-3 |
Low Voltage Power Supplies, D.C. Output Part 3: Electromagnetic Compatibility (EMC)-IEC 61204-3: 2000 |
|
CENELEC EN 61293 |
Marking of Electrical Equipment with Ratings Related to Electrical Supply - Safety Requirements; (IEC 1293 : 1994) |
|
CENELEC EN 61310-3 |
Safety of Machinery - Indication, Marking and Actuation - Part 3: Requirements for the Location and Operation of Actuators-IEC 61310-3: 1999 |
|
CENELEC EN 61558-2-9 |
Safety of power transformers, power supply units and similar products Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps-IEC 61558-2-9:2002; Supersedes EN 60742:1995 |
|
CENELEC EN 61779-2 |
Electrical Apparatus for the Detection and Measurement of Flammable Gases Part 2: Performance Requirements for Group I Apparatus Indicating a Volume Fraction up to 5% Methane in Air-Supersedes EN 50055:1998; IEC 61779-2:1998 Modified |
|
CENELEC EN 61800-2 |
Adjustable Speed Electrical Power Drive Systems Part 2: General Requirements Rating Specifications for Low Voltage Adjustable Frequency a.c. Power Drive Systems-IEC 61800-2:1998 |
|
CENELEC EN 61800-4 |
Adjustable speed electrical power drive systems Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV-IEC 61800-4: 2002 |
|
CENELEC EN 50200 |
Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
|
CENELEC EN 50272-3 |
Safety requirements for secondary batteries and battery installations Part 3: Traction batteries |
|
CENELEC EN 50397-1 |
Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. Part 1: Covered conductors |
|
CENELEC EN 60079-30-1 |
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
|
CENELEC EN 60255-21-1 |
Electrical Relays Part 21: Vibration, Shock, Bump and Seismic Tests on Measuring Relays and Protection Equipment Section 1: Vibration Tests (Sinusoidal) (IEC 255-21-1 : 1988) |
|
CENELEC EN 60332-1-2 |
Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame-IEC 60332-1-2:2004; Supersedes EN 50265-2-1:1998 |
|
CENELEC EN 60349-2 |
Railway Applications - Rotating Electrical Machines for Rail and Road Vehicles Part 2: Electronic Convertor-Fed Alternating Current Motors-IEC 60349-2:1993, Modified |
|
CENELEC EN 60598-2-2 |
Luminaires Part 2: Particular Requirements Section 2: Recessed Luminaires-IEC 598-2-2: 1996 including Amendment A1: 1997; Supersedes EN 60598-2-2: 1989 and its Amendment |
|
CENELEC EN 60598-2-5 |
Luminaires Part 2-5: Particular Requirements - Floodlights-IEC 60598-2-5: 1998; Includes Corrigendum December 1998 |
|
CENELEC EN 60947-5-6 |
Low-Voltage Switchgear and Controlgear Part 5-6: Control Circuit Devices and Switching Elements DC Interface for Proximity Sensors and Switching Amplifiers (NAMUR)-IEC 60947-5-6:1999; Supersedes EN 50227:1997 |
|
CENELEC EN 60998-2-4 |
Connecting devices for low voltage circuits for household and similar purposes Part 2-4: Particular requirements for twist-on connecting devices-(IEC 60998-2-4):2004, modified |
|
CENELEC EN 61557-6 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems |
|
CENELEC HD 21.3 |
Polyvinyl Chloride (PVC) Insulated Cables and Flexible Cords of Rated Voltage Uo/U up to and Including 450/750v |
|
CEN EN 13160-3 |
Leak detection systems - Part 3: Liquid systems for tanks |
|
CEN EN 2591 |
Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - General |
|
CENELEC EN 50013 |
Low Voltage Switchgear and Controlgear for Industrial Use Terminal Marking and Distinctive Number for Particular Control Switches |
|
CENELEC EN 50128 |
Railway Applications - Communications, Signalling and Processing Systems - Software for Railway Control and Protection Systems |
|
CENELEC EN 50205 |
Relays with Forcibly Guided (Mechanically Linked) Contacts |
|
CENELEC EN 60349-1 |
Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors-Includes amendment A1: 2002; IEC 60349-1: 1999 + A1: 2002; Supersedes HD 225 S1: 1977 |
|
CENELEC EN 60968 |
Self-Ballasted Lamps for General Lighting Services Safety Requirements-Includes Amendments A1:01/1993 and A2:10/1999; IEC 60968:1988 Modified + A1:1991 + A2:1999 |
|
CENELEC EN 61056-1 |
General purpose lead-acid batteries (valve-regulated types) Part 1: General requirements, functional characteristics - Methods of test-IEC 61056-1: 2002 |
|
CENELEC EN 61558-2-12 |
Safety of Power Transformers, Power Supply Units and Similar Devices Part 2-12: Particular Requirements for Constant Voltage Transformers-IEC 61558-2-12:2001 |
|
CENELEC EN 61558-2-23 |
Safety of Power Transformers, Power Supply Units and Similar Devices Part 2-23: Particular Requirements for Transformers for Construction Sites-IEC 61558-2-23: 2000 |
|
CENELEC EN 61558-2-3 |
Safety of Power Transformers, Power Supply Units and Similar Devices Part 2-3: Particular Requirements for Ignition Transformers for Gas and Oil Burners-IEC 61558-2-3: 1999 |
|
CENELEC EN 61960 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes Secondary lithium cells and batteries for portable applications-IEC 61960: 2003; Partially Supersedes EN 61960-1:2001 & EN 61960-2:2001 |
|
CENELEC EN 62041 |
Power transformers, power supply units, reactors and similar products EMC requirements-IEC 62041: 2003 |
|
CENELEC EN 62079 |
Preparation of Instructions - Structuring, Content and Presentation-IEC 62079:2001 |
|
CENELEC HD 21.2 S2 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 2: Test Methods |
|
CENELEC EN 50091-1-1 |
Uninterruptible power systems (UPS) Part 1-1: General and safety requirements for UPS used in operator access areas-Incorporating corrigendum August 2004; Supersedes EN 50091-1:1993 |
|
CENELEC EN 50091-1-2 |
Uninterruptible Power Systems (UPS) - Part 1-2: General and Safety Requirements for UPS Used in Restricted Access Locations-Incorporates Corrigendum August 1999; |
|
CENELEC EN 60071-1 |
Insulation Co-Ordination Part 1: Definitions, Principles and Rules |
|
CENELEC EN 60071-2 |
Insulation Co-Ordination Part 2: Application Guide-IEC 71-2: 1996; Supersedes HD 450.2 S1: 1991 and Partly Supersedes HD 540.3 S1: 1991 |
|
CENELEC EN 60216-2 |
Electrical insulating materials Thermal endurance properties Part 2: Determination of thermal endurance properties of electrical insulating materials Choice of test criteria-(IEC 60216-2):2005;:1992 |
|
CENELEC EN 60598-2-9 |
Luminaires Part 2: Particular Requirements Section Nine - Photo and Film Luminaires (Non- Professional) |
|
CENELEC EN 60811-1-1 |
Insulating and Sheathing Materials of Electric and Optical Cables - Common Test Methods - Part 1-1: General Application - Measurement of Thickness and Overall Dimensions - Tests for Determining the Mechanical Properties-Includes Amendment A1: 2001; IEC 60811-1-1: 1993 - A1: 2001; Supersedes HD 505.1-1 S3: 1991 |
|
CENELEC EN 60999-2 |
Connecting devices Electrical copper conductors Safety requirements for screw-type and screwless-type clamping units Part 2: Particular requirements for clamping units for conductors above 35 mm up to 300 mm (included)-IEC 60999:2003 |
|
CENELEC EN 61643-21 |
Low Voltage Surge Protective Deveices - Part 21: Surge Protective Devices Connected to Telecommunications and Signalling Networks - Performance Requirements and Testing Methods-IEC 61643-21:2000 + Corrigendum 2001 |
|
CENELEC EN 61951-1 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells Part 1: Nickel-cadmium-IEC 61951-1: 2003; Supersedes HD 561 S1:1991, EN 60285:1994 and EN 61440:1997 |
|
CENELEC EN 62013-1 |
Caplights for use in mines susceptible to firedamp Part 1: General requirements - Construction and testing in relation to the risk of explosion-IEC 62013-1: 2005 |
|
CENELEC HD 21.2 S2/ A13 |
AMD 13 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods |
|
CENELEC CLC/TS 60034-18-34 |
Rotating electrical machines Part 18-34: Functional evaluation of insulation systems Test procedures for form-wound windings Evaluation of thermomechanical endurance of insulation systems-IEC/TS 60034-18-34: 2000 |
|
CEN EN 13160-2 |
Leak detection systems - Part 2: Pressure and vacuum systems |
|
CENELEC EN 50281-2-1 |
Electrical Apparatus for Use in the Presence of Combustible Dust - Part 2-1: Test Methods - Methods of Determining Minimum Ignition Temperatures |
|
CENELEC EN 60216-3 |
Electrical insulating materials - Thermal endurance properties Part 3: Instructions for calculating thermal endurance characteristics |
|
CENELEC EN 60335-2-95 |
Household and similar electrical appliances - Safety Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use-IEC 60335-2-95:2002, modified |
|
CENELEC EN 60335-2-97 |
Household and similar electrical appliances - Safety Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment |
|
CENELEC EN 60598-2-10 |
Luminaires Part 2-10: Particular requirements - Portable luminaires for children-Incorporates Corrigendum August 2005; IEC 60598-2-10:2003 |
|
CENELEC EN 60664-5 |
Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm |
|
CENELEC EN 60811-1-4 |
Insulating and sheathing materials of electric cables - Common test methods - Part 1-4: General application - Tests at low temperature-Includes amendment A2: 2001; IEC 60811-1-4: 1985 + Corrigendum May 1986 + A1: 1993 + A2: 2001; Supersedes HD 505.1.4 S1: 1988 |
|
CENELEC EN 60998-2-3 |
Connecting Devices for Low-Voltage Circuits for Household and Similar Purposes - Part 2-3: Particular Requirements for Connecting Devices as Separate Entities with Insulation Piercing Clamping Units |
|
CENELEC EN 61212-3-3 |
Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Part 3: Specifications for individual materials Sheet 3: Round laminated moulded rods-IEC 61212-3-3:2006 |
|
CENELEC EN 88528-11 |
Reciprocating internal combustion engine driven alternating current generating sets Part 11: Rotary uninterruptible power systems - Performance requirements and test methods |
|
CEN EN 1197 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Monozinc Phosphate Solution |
|
CENELEC EN 50086-2-4 |
Conduit Systems for Cable Management - Part 2-4: Particular Requirements for Conduit Systems Buried Underground-Includes Amendment A1: 2001; Incorporating Corrigendum February 2001 |
|
CENELEC EN 50272-2 |
Safety Requirements for Secondary Batteries and Battery Installations Part 2: Stationary Batteries |
|
CENELEC EN 60068-3-7 |
Environmental Testing - Part 3-7: Supporting Documentation and Guidance - Measurements in Temperature Chambers for Tests A and B (With Load)-IEC 60068-3-7:2001 |
|
CENELEC EN 60255-21-3 |
Electrical Relays Part 21: Vibration, Shock, Bump and Seismic Tests on Measuring Relays and Protection Equipment Section 3: Seismic Tests (IEC 255-21-3 : 1993) |
|
CENELEC EN 60255-3 |
Electrical Relays Part 3: Single Input Energizing Quantity Measuring Relays with Dependent or Independent Time-IEC 60255-3:1989, Modified |
|
CENELEC EN 60332-2-2 |
Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame-IEC 60332-2-2:2004; Supersedes EN 50265-2-2:1998 |
|
CENELEC EN 60423 |
Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
|
CENELEC EN 60447 |
Basic and safety principles for man-machine interface, marking and identification Actuating principles-IEC 60447:2004 |
|
CENELEC EN 60598-2-19 |
Luminaires Part 2: Particular requirements Section 19 Air-handling luminaires (safety requirements)-Includes amendment A2:1998; Incorporating Corrigendum December 2005; IEC 598-2-19:1981 |
|
CENELEC EN 60598-2-7 |
Luminaires Part 2: Particular Requirements Section Seven - Portable Luminaires for Garden Use-Includes Amendments A11: 1994 + A12: 1995 + A2: 1996 + A13: 1996; IEC 598-2-7: 1982 + A1: 1987 + A2: 1994, Modified |
|
CENELEC EN 60695-4 |
Fire hazard testing — Part 4: Terminology concerning fire tests for electrotechnical products |
|
CENELEC EN 60811-3-1 |
Insulating and Sheathing Materials of Electric Cables - Common Test Methods - Part 3: Methods Specific to PVC Compounds - Section 1: Pressure Test at High Temperature - Tests for Resistance to Cracking-Includes Amendments A1:1996 and A2:2001; IEC 811-3-1:1985 + Corrigendum May 1986 + A1:1994 + A2:2001; Supersedes HD 505.3.1 S1:1989 |
|
CENELEC EN 60851-3 |
Winding wires Test methods Part 3: Mechanical properties-Includes amendments A1:1997 and A2:2003; IEC 60851-3:1996 + A1:1997 + A2:2003; Supersedes HD 490.3 S3:1993 |
|
CENELEC EN 61009-1 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) Part 1: General rules-IEC 61009-1:1996 + corr. 2003 + A1:2002, modified |
|
CENELEC EN 61034-1 |
Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus-IEC 61034-1: 2005; Supersedes EN 50268-1: 1999 |
|
CENELEC EN 61241-2-2 |
Electrical Apparatus for Use in the Presence of Combustible Dust Part 2: Test Methods Section 2: Method for Determining the Electrical Resistivity of Dust in Layers (IEC 1241-2-2 : 1993 + Corrigendum 1994) |
|
CENELEC EN 61347-2-4 |
Lamp Controlgear Part 2-4: Particular Requirements for D.C. Supplied Electronic Ballasts for General Lighting-Partly Supersedes EN 60924:1991 + A1:1994; IEC 61347-2-4:2000; Incorporating Corrigendum July 2003 |
|
CENELEC EN 61543 |
Residual current-operated protective devices (RCDs) for household and similar useElectromagnetic compatibility-Includes Amendments A11:2003, A12:2005 and A2:2006; IEC 61543:1995 |
|
CENELEC EN 61557-5 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth |
|
CENELEC EN 61558-2-19 |
Safety of Power Transformers, Power Supply Units and Similar Devices Part 2-19: Particular Requirements for Perturbation Attenuation Transformers-IEC 61558-2-19:2000 |
|
CENELEC EN 62040-1-2 |
Uninterruptible power systems (UPS) Part 1-2: General and safety requirements for UPS used in restricted access locations-IEC 62040-1-2:2002 + corrigendum 2002 + corrigendum 2004; |
|
CENELEC HD 21.4 S2 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 4: Sheathed Cables for Fixed Wiring |
|
CENELEC HD 22.1 S2/ A19 |
AMD 19 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements |
|
CEN EN 13160-4 |
Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces |
|
CEN EN 13160-7 |
Leak detection systems Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets |