|
CENELEC EN 60950-1 |
Information technology equipment - Safety Part 1: General requirements-IEC 60950-1:2005 |
|
CENELEC EN 55022 |
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement-CISPR 22:2005 |
|
CENELEC EN 61000-4-5 |
Electromagnetic Compatibility (EMC) - Part 4-5: Testing and Measurement Techniques - Surge Immunity Test-IEC 61000-4-5:2005 |
|
CENELEC EN 61000-3-2 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current greater than or equal to 16 A per phase)-IEC 61000-3-2:2005 |
|
CENELEC EN 60601-1-2 |
Medical Electrical Equipment Part 1-2: General Requirements for Safety - Collateral Standard: Electromagnetic Compatibility - Requirements and Tests |
|
CENELEC EN 61000-6-2 |
Electromagnetic compatibility (EMC) Part 6-2: Generic standards – Immunity for industrial environments-IEC 61000-6-2: 2005 |
|
CENELEC EN 61326-1 |
Electrical equipment for measurement, control and laboratory use – EMC requirements Part 1: General requirements-IEC 61326-1:2005;:1997 |
|
CENELEC EN 61000-6-4 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
|
CENELEC EN 55011 |
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement-Includes amendments A2:2007 |
|
CENELEC EN 60950 |
Safety of Information Technology Equipment-IEC 60950: 1999 + Corr. January 2000, Modified; Incorporating Corrigendum February 2002 |
|
CENELEC EN 50332-1 |
Sound System Equipment - Headphones and Earphones Associated with Portable Audio Equipment - Maximum Sound Pressure Level Measurement Methodology and Limit Considerations - Part 1: General Method for |
|
CENELEC EN 61000-4-3 |
Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test-IEC 61000-4-3:2006 |
|
CENELEC EN 55024 |
Information technology equipment Immunity characteristics Limits and methods of measurement-Includes amendments A1:2001 and A2:2003; CISPR 24:1997 + A1:2001 + A2:2002, modified |
|
CENELEC EN 61800-3 |
Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods-IEC 61800-3:2004 |
|
CENELEC EN 60730-1 |
Automatic electrical controls for household and similar use - Part 1: General requirements-Incorporates Amendments A1:2004; A11:2002; A12:2003; A13:2004; A14:2005; A15:2007; A16:2007; Incorporating corrigendum August 2007 |
|
CENELEC EN 61000-4-6 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields-Incorporating corrigendum August 2007 |
|
CENELEC EN 50332-2 |
Sound system equipment: Headphones and earphones associated with portable audio equipment Maximum sound pressure level measurement methodology and limit considerations Part 2: Matching of sets with headphones if either or both are offered separately |
|
CENELEC EN 61000-4-8 |
Electromagnetic Compatibility (EMC) - Part 4-8: Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test-Including Amendment A1: 2001; IEC 61000-4-8: 1993 + A1: 2000 |
|
CENELEC EN 61000-6-1 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
|
CENELEC EN 61000-6-3 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
|
CENELEC EN 61508-1 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems Part 1: General Requirements-IEC 61508-1: 1998 + Corrigendum 1999 |
|
CENELEC EN 55020 |
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement |
|
CENELEC EN 55014-1 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1: Emission |
|
CENELEC EN 55013 |
Sound and Television Broadcast Receivers and Associated Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement-Including amendment A1:2003; CISPR 13:2001 + A1:2003, modified; Amendment A2: 2006 |
|
CENELEC EN 61000-4-4 |
Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test-IEC 61000-4-4:2004; Incorporating corrigendum August 2006 |
|
CEN EN 1010-1 |
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
|
CENELEC EN 61326-2-3 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning-IEC 61326-2-3:2006 |
|
CENELEC EN 61131-2 |
Programmable controllers - Part 2: Equipment requirements and tests |
|
CEN EN 13309 |
Construction Machinery - Electromagnetic Compatibililty of Machines with Internal Electrical Power Supply |
|
CENELEC EN 55014-2 |
Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus Part 2: Immunity - Product Family Standard-Includes Amendment A1: 2001; CISPR 14-2: 1997; Supersedes EN 55104: 1995; Incorporating Corrigendum December 1997 |
|
CENELEC EN 133200 |
Sectional Specification: Passive Filter Units for Electromagnetic Interference Suppression (Filters for Which Safety Tests are Required) |
|
CENELEC EN 50116 |
Information Technology Equipment Routine Electrical Safety Testing in Production |
|
CENELEC EN 61326-2-6 |
Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-6: Particular requirements In vitro diagnostic (IVD) medical equipment-IEC 61326-2-6:2005; Supersedes EN 61326:1997 + A1:1998 + A2:2001 + A3:2003 |
|
CENELEC EN 61326/A3 |
Electrical equipment for measurement, control and laboratory use - EMC requirements-Annexes E & F of IEC 61326:2002 + corrigendum 2002; Ratified European Text |
|
CENELEC EN 61508-7 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems Part 7: Overview of Techniques and Measures-IEC 61508-7:2000 |
|
CENELEC HD 620 S1 |
Distribution Cables with Extruded Insulation for Rated Voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV-Volume II: Parts 6 to 9 |
|
CENELEC EN 61000-4-13 |
Electromagnetic Compatibility (EMC) - Part 4-13: Testing and Measurement Techniques - Harmonics and Interharmonics Including Mains Signalling at a.c. Power Port, Low Frequency Immunity Tests-IEC 61000-4-13: 2002 |
|
CEN EN 12895 |
Industrial Trucks - Electromagnetic Compatibility |
|
CENELEC EN 61000-4-7 |
Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto-IEC 61000-4-7:2002 |
|
CENELEC EN 60950-21 |
Information technology equipment Safety Part 21: Remote power feeding-IEC 60950-21:2002; Incorporating Corrigendum August 2003 |
|
CEN EN 1047-2 |
Secure Storage Units - Classification and Methods of Test for Resistance to Fire - Part 2: Data Rooms and Data Containers |
|
CENELEC EN 60950-22 |
Information technology equipment - Safety Part 22: Equipment installed outdoors-IEC 60950-22:2005 |
|
CENELEC EN 55015 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment-Incorporating Amendment A1: 5/2007 |
|
CENELEC EN 61000-2-2 |
Electromagnetic Compatibility (EMC) Part 2-2: Environment Compatibility Levels for Low-Frequency Conducted Disturbances and Signalling in Public Low-Voltage Power Supply Systems |
|
CEN EN 12016 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
|
CENELEC EN 61000-4-1 |
Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
|
CEN EN 619 |
Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of unit loads |
|
CEN EN 12015 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission |
|
CENELEC EN 50 116 |
Information Technology Equipment Routine Electrical Safety Testing in Production |
|
CENELEC EN 61000-2-4 |
Electromagnetic Compatibility (EMC) Part 2-4: Environment - Compatibility Levels in Industrial Plants for Low-Frequency Conducted Disturbances-IEC 61000-2-4: 2002 |
|
CENELEC EN 61000-3-11 |
Electromagnetic Compatibility (EMC) Part 3-11: Limits - Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public Low-Voltage Supply Systems - Equipment with Rated Current Greater than or Equal to 75 A and Subject to Conditional Connection-IEC 61000-3-11:2000 |
|
CEN EN 1010-2 |
Safety of machinery Safety requirements for the design and construction of printing and paper converting machines Part 2: Printing and varnishing machines including pre-press machinery |
|
CENELEC EN 61131-1 |
Programmable controllers Part 1 : General information-IEC 61131-1:2003 |
|
CEN EN ISO 13406-2 |
Ergonomic Requirements for Work with Visual Displays Based on Flat Panels - Part 2: Ergonomic Requirements for Flat Panel Displays-ISO 13406-2: 2001 |
|
CEN EN ISO 7779 |
Acoustics - Measurement of Airborne Noise Emitted by Information Technology and Telecommunications Equipment-Includes Amendment A1:2003; Supersedes EN 27779:1991; ISO 7779:1999 + A1:2003 |
|
CENELEC EN 61326-2-1 |
Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-1: Particular requirements Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications-IEC 61326-2-1:2005; Supersedes EN 61326:1997 + A1:1998 + A2:2001 + A3:2003 |
|
CENELEC EN 60939-2-1 |
Complete filter units for radio interference suppression Part 2-1: Blank detail specification Passive filter units for electromagnetic interference suppression Filters for which safety tests are required (assessment level D/DZ)-IEC 60939-2-1:2004; Supersedes EN 133201:1998 |
|
CEN EN 50270 |
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
|
CEN CEN ISO/TS 14822-1 |
Traffic and travel information General specifications for medium-range preinformation via dedicated short-range communication Part 1: Downlink-ISO/TS 14822-1:2006 |
|
CENELEC EN 60215 |
Safety Requirements for Radio Transmitting Equipment (IEC 215 (1987) ed 3 + A1 : 1992 + A2 : 1994) (Includes Amendments A1 : 1992 + A2 : 1994) |
|
CENELEC EN 60118-13 |
Electroacoustics – Hearing aids Part 13: Electromagnetic compatibility (EMC)-IEC 60118-13: 1997 |
|
CENELEC EN 50132-7 |
Alarm Systems - CCTV Surveillance Systems for Use in Security Applications Part 7: Application Guidelines |
|
CENELEC EN 55103-1 |
Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use Part 1: Emission |
|
CENELEC EN 60849 |
Sound Systems for Emergency Purposes-IEC 60849:1998 |
|
CENELEC EN 61000-4-15/A1 |
Electromagnetic compatibility (EMC) Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications-IEC 61000-4-15:1997/A1:2003; Amendment A1; Ratified European Text |
|
CEN EN 61970-1 |
Energy management system application program interface (EMS-API) Part 1: Guidelines and general requirements-IEC 61970-1: 2005 |
|
CENELEC CLC/TR 62102 |
Electrical safety – Classification of interfaces for equipment to be connected to information and ommunications technology networks |
|
CEN EN 1556 |
Bar Coding - Terminology |
|
CENELEC EN 61131-3 |
Programmable controllers Part 3: Programming languages-IEC 61131-3:2003 |
|
CENELEC EN 60617-9 |
Graphical Symbols for Diagrams Part 9: Telecommunications: Switching and Peripheral Equipment-IEC 617-9: 1996 |
|
CENELEC EN 60939-2-2 |
Complete filter units for radio interference suppression Part 2-2: Blank detail specification Passive filter units for electromagnetic interference suppression Filters for which safety tests are required (safety tests only)-IEC 60939-2-2:2004; Supersedes EN 133221:1998 |
|
CENELEC EN 55012 |
Vehicles, Boats, and Internal Combustion Engine Driven Devices - Radio Disturbance Characteristics - Limits and Methods of Measurement for the Protection of Receivers Except Those Installed in the Vehicle/Boat/Device Itself or in Adjacent Vehicles/Boats/Devices-Incorporates Amendment A1: March 2005 |
|
CENELEC EN 61000-4-12 |
Electromagnetic compatibility (EMC) Part 4-12: Testing and measurement techniques - Ring wave immunity test |
|
CENELEC EN 50014-2 |
Electromagnetic Compatibility Requirements for Household Appliances, Electric Tools and Similar Apparatus Part 2: Immunity Product Family Standard-CISPR 14-2: 1997 |
|
CENELEC EN 50083-2 |
Cable networks for television signals, sound signals and interactive services Part 2: Electromagnetic compatibility for equipment |
|
CEN CEN ISO/TS 17261 |
Intelligent transport systems Automatic vehicle and equipment identification Intermodal goods transport architecture and terminology |
|
CENELEC CLC/TS 50459-4 |
Railway applications – Communication, signalling and processing systems – European Rail Traffic Management System – Driver-Machine Interface Part 4: Data entry for the ERTMS/ETCS/GSM-R systems |
|
CENELEC EN 55025 |
Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement-CISPR 25: 2002 |
|
CENELEC EN 60555-3/A1 |
Text of Corrigendum-Ratified European Text; Corrigendum December, 1997 |
|
CENELEC CLC/TS 50459-3 |
Railway applications – Communication, signalling and processing systems – European Rail Traffic Management System – Driver-Machine Interface Part 3: Ergonomic arrangements of ERTMS/GSM-R information |
|
CENELEC EN 50083-1 |
Cabled Distribution Systems for Television, Sound and Interactive Multimedia Signals Part 1: Safety Requirements-Includes Amendments A1: 1997 and A2: 1997 |
|
CENELEC EN 55103-2 |
Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use Part 2: Immunity |
|
CENELEC EN 61000-4-30 |
Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques Power quality measurement methods-IEC 61000-4-30:2003; Incorporating Corrigendum August 2006 |
|
CENELEC EN 61000-4-9 |
Electromagnetic Compatibility (EMC) - Part 4-9: Testing and Measurement Techniques - Pulse Magnetic Field Immunity Test-Includes Amendment A1: 2001; IEC 1000-4-9: 1993 + A1: 2000 |
|
CENELEC EN 61204-3 |
Low Voltage Power Supplies, D.C. Output Part 3: Electromagnetic Compatibility (EMC)-IEC 61204-3: 2000 |
|
CEN EN ISO/IEC 15426-2 |
Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification - Part 2: Two-dimensional symbols-ISO/IEC 15426-2:2005 |
|
CENELEC CLC/TS 50459-1 |
Railway applications – Communication, signalling and processing systems – European Rail Traffic Management System – Driver-Machine Interface Part 1: Ergonomic principles for the presentation of ERTMS/ETCS/GSM-R information |
|
CEN EN 1010-3 |
Safety of machinery Safety requirements for the design and construction of printing and paper converting machines Part 3: Cutting machines |
|
CEN EN 1010-4 |
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines |
|
CEN EN 1545-1 |
Identification card systems - Surface transport applications - Part 1: Elementary data types, general code lists and general data elements |
|
CENELEC EN 60617-11 |
Graphical Symbols for Diagrams Part 11: Architectural and Topographical Installation Plans and Diagrams-IEC 617-11 : 1996 |
|
CEN CEN ISO/TS 14907-1 |
Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures-ISO/TS 14907-1:2005; Supersedes ENV ISO 14907-1:2000 |
|
CENELEC EN 50083-3 |
Cable Networks for Television Signals, Sound Signals and Interactive Services Part 3: Active Wideband Equipment for Coaxial Cable Networks-Ratified European Text |
|
CENELEC EN 50132-2-1 |
Alarm Systems - CCTV Surveillance Systems for Use in Security Applications Part 2-1: Black and White Cameras |
|
CENELEC EN 50385 |
Product Standard to Demonstrate the Compliances of Radio Base Stations and Fixed Terminal Stations for Wireless Telecommunication Systems with the Basic Restrictions or the Reference Levels Related to Human Exposure to Radio Frequency Electromagnetic Fields (110 MHz - 40 GHz) - General Public |
|
CENELEC EN 55016-4-2 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 4-2: Uncertainties, statistics and limit modelling Uncertainty in EMC measurements-CISPR 16-4-2:2003 |
|
CENELEC EN 60801-2 |
Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 2: Electrostatic Discharge Requirements (IEC 801-2:1991) |
|
CENELEC EN 61000-4-10 |
Electromagnetic Compatibility (EMC) - Part 4-10: Testing and Measurement Techniques - Damped Oscillatory Magnetic Field Immunity Test-Includes Amendment A1:2001; IEC 61000-4-10:1993 + A1:2000 |
|
CEN EN ISO 9241-4 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 4: Keyboard Requirements-ISO 9241-4: 1998 |
|
CEN EN ISO 9241-7 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 7: Requirements for Display with Reflections-ISO 9241-7:1998 |
|
CEN CEN ISO/TS 17263 |
Automatic vehicle and equipment identification Intermodal goods transport System parameters-ISO/TS 17263: 2003 |
|
CENELEC CLC/TS 50459-5 |
Railway applications – Communication, signalling and processing systems – European Rail Traffic Management System – Driver-Machine Interface Part 5: Symbols |
|
CENELEC EN 122200 |
Sectional Specification: Radio Frequency Coaxial Connectors. Series TNC |
|
CEN EN 13023 |
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 |
|
CENELEC EN 55016-2-2 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 2-2: Methods of measurement of disturbances and immunity – Measurement of disturbance power-CISPR 16-2-2:2003; Including amendments A1:2005 and A2:2005 |
|
CENELEC EN 60495 |
Single Sideband Power-Line Carrier Terminals (IEC 495 : 1993) |
|
CENELEC EN 61000-4-20 |
Electromagnetic compatibility (EMC) Part 4-20: Testing and measurement techniques Emission and immunity testing in transverse electromagnetic (TEM) waveguides-Incorporates Amendment A1: June 2007 |
|
CENELEC EN 61000-4-21 |
Electromagnetic compatibility (EMC) Part 4-21: Testing and measurement techniques Reverberation chamber test methods-IEC 61000-4-21: 2003 |
|
CENELEC EN 61326-2-2 |
Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-2: Particular requirements Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems-IEC 61326-2-2:2005; Supersedes EN 61326:1997 + A1:1998 + A2:2001 + A3:2003 |
|
CENELEC EN 62041 |
Power transformers, power supply units, reactors and similar products EMC requirements-IEC 62041: 2003 |
|
CEN EN ISO/IEC 13818-1 |
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information - Part 1: Systems-ISO/IEC 13 818-1: 1996 |
|
CENELEC HD 476.1 |
Solderless Connections Part 1: Solderless Wrapped Connections - General Requirements, Test Methods and Practical Guidance |
|
CEN CEN ISO/TS 18234-3 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 3: Service and Network Information (SNI) application-ISO/TS 18234-3:2006 |
|
CENELEC CLC/TS 50459-2 |
Railway applications – Communication, signalling and processing systems – European Rail Traffic Management System – Driver-Machine Interface Part 2: Ergonomic arrangements of ERTMS/ETCS information |
|
CENELEC EN 50412-2-1 |
Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz Part 2-1: Residential, commercial and industrial environment Immunity requirements |
|
CENELEC EN 61000-2-10 |
Electromagnetic Compatibility (EMC) Part 2-10: Environment - Description of HEMP Environment - Conducted Disturbance-IEC 61000-2-10: 1998 |
|
CENELEC EN 61000-4-14 |
Electromagnetic compatibility (EMC) Part 4-14: Testing and measurement techniques Voltage fluctuation immunity test-Includes amendment A1:2004; IEC 61000-4-14:1999 |
|
CENELEC EN 61000-4-16 |
Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz-IEC 61000-4-16:1998; Includes amendment A1:2004 |
|
CENELEC EN 61937-5 |
Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 5: Non-linear PCM bitstreams according to the DTS (Digital Theater Systems) format(s) |
|
CENELEC EN 62209-1 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)-IEC 62209-1:2005;:2001 |
|
CEN EN ISO 128-21 |
Technical Drawings - General Principles of Presentation - Part 21: Preparation of Lines by CAD Systems-ISO 128-21: 1997 |
|
CEN EN ISO/IEC 15416 |
Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Print Quality Test Specification - Linear Symbols-ISO/IEC 15416: 2000; Supersedes EN 1635:1997 |
|
CEN CEN ISO/TS 14907-2 |
Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the onboard unit application interface-ISO/TS 14907-2:2006 |
|
CEN CEN/TS 14826 |
Postal services - Automatic identification of items - Two dimensional bar code symbol print quality specification for machine readable Digital Postage Marks |
|
CEN CEN/TS 15211 |
Health Informatics - Mapping of Hierarchical Message Descriptions to XML |
|
CEN EN 14010 |
Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
|
CEN EN 1545-2 |
Identification card systems - Surface transport applications - Part 2: Transport and travel payment related data elements and code lists-Supersedes ENV 1545-2:1998 |
|
CENELEC EN 50360 |
Product Standard to Demonstrate the Compliance of Mobile Phones with the Basic Restrictions Related to Human Exposure to Electromagnetic Fields (300 MHz - 3 GHz)-Incorporates Corrigendum: July 2006 |
|
CEN EN 584-1 |
Non Destructive Testing - Industrial Radiographic Film - Part 1: Classification of Film Systems for Industrial Radiography |
|
CEN EN ISO 13567-2 |
Technical Product Documentation - Organization and Naming of Layers for CAD - Part 2: Concepts, Format and Codes Used in Construction Documentation-ISO 13567-2: 1998 |
|
CEN EN ISO 9241-13 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 13: User Guidance-ISO 9241-13:1998 |
|
CENELEC ENV 50141 |
Electromagnetic Compatibility - Basic Immunity Standard - Conducted Disturbances Induced by Radio- Frequency Fields - Immunity Test |
|
CENELEC ES 59011 |
Representation of Quality Rules and Metrics for Hardware and Software Design Languages |
|
CEN CEN ISO/TS 18234-1 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 1: Introduction, Numbering and Versions-ISO/TS 18234-1:2006 |
|
CEN CEN ISO/TS 18234-2 |
Traffic and Traveller Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 2: Syntax, Semantics and Framing Structure (SSF)-ISO/TS 18234-2:2006 |
|
CEN CEN ISO/TS 24530-1 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) - Part 1: Introduction, common data types and tpegML-ISO/TS 24530-1:2006 |
|
CEN CEN/TS 14463 |
Health informatics - A syntax to represent the content of medical classification systems (CIaML) |
|
CEN EN 29241-2 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 2: Guidance on Task Requirements (ISO 9241-2: 1992) |
|
CENELEC EN 50083-4 |
Cable Networks for Television Signals, Sound Signals and Interactive Services Part 4: Passive Wideband Equipment for Coaxial Cable Networks-Ratified European Text |
|
CENELEC EN 50364 |
Limitation of Human Exposure to Electromagnetic Fields from Devices Operating in the Frequency Range 0 Hz to 10 GHz, Used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and Similar Applications |
|
CENELEC EN 50383 |
Basic Standard for the Calculation and Measurement of Electromagnetic Field Strength and SAR Related to Human Exposure from Radio Base Stations and Fixed Terminal Stations for Wireless Telecommunications Systems (110 MHz - 40 GHz) |
|
CENELEC EN 60555(PART 1) |
Disturbances in Supply Systems Caused by Household Appliances and Similar Electrical Equipment - Part 1: Definitions |
|
CEN EN 606 |
Bar coding - Transport and handling labels for steel products |
|
CENELEC EN 60617-10 |
Graphical Symbols for Diagrams Part 10: Telecommunications: Transmission-IEC 617-10: 1996 |
|
CENELEC EN 60617-12 |
Graphical Symbols for Diagrams Part 12: Binary Logic Elements-IEC 60617-12:1997 |
|
CENELEC EN 61326-2-4 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-4: Particular requirements Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
|
CENELEC EN 61326-2-5 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 |
|
CEN CEN ISO/TS 17262 |
Automatic vehicle and equipment identification Intermodal goods transport Numbering and data structures-ISO/TS 17262: 2003 |
|
CEN CEN ISO/TS 18234-5 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 5: Public Transport Information (PTI) application-ISO/TS 18234-5:2006 |
|
CEN CEN ISO/TS 24530-3 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) - Part 3: tpeg-rtmML-ISO/TS 24530-3:2006 |
|
CEN CEN ISO/TS 24530-4 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) - Part 4: tpeg-ptiML-ISO/TS 24530-4:2006 |
|
CEN CEN/TS 14014 |
Postal services - Hybrid Mail - XML definition of encapsulation of letters for automated postal handling-Supersedes ENV 14014:2001 |
|
CEN CEN/TS 15213-2 |
Road transport and traffic telematics - After-theft systems for the recovery of stolen vehicles - Part 2: Common status message elements |
|
CEN CEN/TS 15260 |
Health informatics - Classification of safety risks from health informatics products |
|
CEN CR 13909 |
Identification Card Systems - Intersector Thin Flexible Card - Acceptance Criteria |
|
CEN EN 1038 |
Identification Card Systems - Telecommunication Applications - Integrated Circuit(s) Card Payphone |
|
CEN EN 1197 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Monozinc Phosphate Solution |
|
CENELEC EN 122340 |
Sectional Specification: Radio Frequency Coaxial Connectors - Series MMCX |
|
CEN EN 1332-1 |
Identification card systems - Man-machine interface - Part 1: Design principles for the user interface-Incorporating amendment A1: 5/2007 |
|
CEN EN 1332-2 |
Identification Card Systems - Man-Machine Interface - Part 2: Dimensions and Location of a Tactile Identifier for ID-1 Cards |
|
CEN EN 1332-5 |
Identification card systems - Man-machine interface - Part 5: Raised tactile symbols for differenciation of application on ID-1 cards |
|
CEN EN 1362 |
Identification Card Systems - Device Interface Characteristics - Classes of Device Interfaces |
|
CEN EN 14822-1 |
Health informatics - General purpose information components - Part 1: Overview |
|
CENELEC EN 186170 |
Sectional Specification: Connector Sets for Optical Fibres and Cables - Type RCC |
|
CENELEC EN 187101 |
Family Specification: Optical Telecommunication Cables to Be Used in Ducts or Direct Buried Application |
|
CENELEC EN 50065-1 |
Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 148,5 kHz Part 1: General Requirements, Frequency Bands and Electromagnetic Disturbances |
|
CENELEC EN 50083-1/CORR |
Cable Networks for Television Signals, Sound Signals and Interactie Services Part 1: Safety Requirements-Ratified European Text; Amendment 1:1997; Amendment 2:1997; Corrigendum: 7/2000 |
|
CENELEC EN 50132-5 |
Alarm Systems - CCTV Surveillance Systems for Use in Security Applications Part 5: Video Transmission |
|
CENELEC EN 60268-7 |
Sound System Equipment Part 7: Headphones and Earphones (IEC 268-7 : 1996) |
|
CENELEC EN 60335-2-56 |
Household and similar electrical appliances - Safety Part 2-56: Particular requirements for projectors and similar appliances-IEC 60335-2-56: 2002 |
|
CENELEC EN 61000-4-17 |
Electromagnetic compatibility (EMC) Part 4-17: Testing and measurement techniques Ripple on d.c. input power port immunity test-Includes amendment A1:2004; IEC 61000-4-17:1999 |
|
CENELEC EN 61131-7 |
Programmable Controllers Part 7: Fuzzy Control Programming-IEC 61131-7:2000 |
|
CENELEC EN 61300-3-26 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-26: Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule axes-IEC 61300-3-26:2002 |
|
CENELEC EN 61970-301 |
Energy management system application program interface (EMS-API) Part 301: Common Information Model (CIM) Base-IEC 61970-301:2003 |
|
CENELEC EN 62343-1-3 |
Dynamic modules Part 1-3: Performance standards - Dynamic gain tilt equalizer with pigtails for use in controlled environments (Category C) |
|
CENELEC EN 62345 |
ID format for 50 mm magneto-optical disc system-(IEC 62345):2005 |
|
CEN EN 726-5 |
Identification Card Systems - Telecommunications Integrated Circuit(s) Cards and Terminals - Part 5: Payment Methods |
|
CEN EN 726-6 |
Identification Card Systems - Telecommunications Integrated Circuit(s) Cards and Terminals - Part 6: Telecommunication Features |
|
CEN EN ISO 9241-8 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 8: Requirements for Displayed Colours-ISO 9241-8:1997 |
|
CEN EN ISO 9241-9 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 9: Requirements for Non-Keyboard Input Devices-ISO 9241-9:2000 |
|
CEN EN ISO/IEC 11172-3 |
Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part 3: Audio (ISO/IEC 1172-3: 1993) |
|
CEN EN ISO/IEC 7811-4 |
Identification Cards - Recording Techniques - Part 4: Location of Read-Only Magnetic Tracks - Tracks 1 and 2-ISO/IEC 7811-4: 1995 |
|
CENELEC HD 483.1 S2 |
Sound System Equipment - Part 1: General |
|
CENELEC HD 576 S1 |
Parallel Sub-System Bus of the IEC 821 VME Bus |
|
CEN CEN ISO/TS 18234-6 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 6: Location referencing applications-ISO/TS 18234-6:2006 |
|
CEN CEN ISO/TS 24530-2 |
Traffic and Travel Information (TTI) - TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) - Part 2: tpeg-locML-ISO/TS 24530-2:2006 |
|
CEN CEN/TR 14699 |
Office furniture - Terminology |
|
CEN CEN/TS 14821-5 |
Traffic and Travel Information (TTI) TTI messages via cellular networks Part 5: Internal services |
|
CEN CEN/TS 14821-7 |
Traffic and Travel Information (TTI) TTI messages via cellular networks Part 7: Performance requirements for onboard positioning |
|
CEN CEN/TS 15480-2 |
Identification card systems - European Citizen Card - Part 2: Logical data structures and card services |
|
CEN CLC/TR 50460 |
Cable networks for television signals, sound signals and interactive services System guidelines for analogue optical transmission systems |
|
CENELEC CLC/TS 50459-6 |
Railway applications – Communication, signalling and processing systems – European Rail Traffic Management System – Driver-Machine Interface Part 6: Audible information |
|
CEN CR 13935 |
Non-Destructive Testing - Generic NDE Data Format Model |
|
CEN EN 1068 |
Health informatics - Registration of coding systems |
|
CENELEC EN 122120 |
Sectional Specification: Radio Frequency Coaxial Connectors Series BNC-Supersedes CECC 22 120 Issue 2: 1992 |
|
CEN EN 12323 |
AIDC technologies - Symbology specifications - Code 16K |
|
CEN EN 13149-1 |
Public transport - Road vehicle scheduling and control systems - Part 1: WORLDFIP definition and application rules for onboard data transmission-ENV 13149-1:1999 |
|
CENELEC EN 138121 |
Blank Detail Specification: Fixed inductors for electromagnetic interference suppression - Inductors for which safety tests are required (Safety tests only)-Ratified European Text |
|
CEN EN 1546-1 |
Identification Card Systems - Inter-Sector Electronic Purse - Part 1: Definitions, Concepts and Structures |
|
CENELEC EN 186130 |
Sectional Specification: Connector Sets for Optical Fibres and Cables. Type LSA |
|
CENELEC EN 187105 |
Single Mode Optical Cable (Duct/Direct Buried Installation) |
|
CENELEC EN 50083-10 |
Cabled Networks for Television Signals, Sound Signals and Interactive Services Part 10: System Performance for Return Paths |
|
CENELEC EN 50401 |
Product standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service |
|
CENELEC EN 50478 |
Functional receiver specification of satellite digital interactive television with a low data rate return channel via satellite - Modem layer specification |
|
CENELEC EN 60107-1 |
Methods of Measurement on Receivers for Television Broadcast Transmissions; Part 1: General Considerations; Measurements at Radio and Video Frequencies-IEC 60107-1:1997 |
|
CENELEC EN 61000-2-12 |
Electromagnetic compatibility (EMC) Part 2-12: Environment Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems-IEC 61000-2-12:2003 |
|
CENELEC EN 61744 |
Calibration of Fibre Optic Chromatic Dispersion Test Sets-IEC 61744:2001 |
|
CENELEC EN 62389 |
Methods of measurement for DVD players-IEC 62389:2005 |
|
CEN EN 726-4 |
Identification Card Systems - Telecommunications Integrated Circuit(s) Cards and Terminals - Part 4: Application Independent Card Related Terminal Requirements |
|
CEN EN 753-1 |
Identification Card Systems - Intersector Thin Flexible Cards - Part 1: General Technical Specifications |
|
CENELEC EN 82045-1 |
Document Management Part 1: Principles and Methods-IEC 82045-1: 2001 |
|
CEN EN ISO 14915-2 |
Software ergonomics for multimedia user interfaces Part 2: Multimedia navigation and control-ISO 14915-2: 2003 |
|
CEN EN ISO 15438 |
Information technology Automatic identification and data capture techniques Bar code symbology specifications PDF417-ISO/IEC 15438:2001; Supersedes ENV 12925: 1997 |
|
CEN EN ISO 9241-15 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) Part 15: Command Dialogues-ISO 9241-15:1997 |
|
CEN EN ISO/IEC 7810 |
Identification Cards - Physical Characteristics-ISO/IEC 7810: 1995 |
|
CENELEC HD 134.5 |
Radio-Frequency Connectors Part 5: R.F. Coaxial Connectors for Cables 96 IEC 50-17 and Larger |
|
CENELEC HD 220 S2 |
Safety Requirements for Radio Transmitting Equipment |
|
CENELEC HD 372 |
Safety of Electrically Energized Office Machines |
|
CENELEC HD 372 S1 |
Safety of Electrically Energized Office Machines |
|
CENELEC HD 483.3 S1 |
Sound System Equipment Part 3: Amplifiers |
|
CEN CEN/TS 14821-6 |
Traffic and Travel Information (TTI) TTI messages via cellular networks Part 6: External services |
|
CEN CEN/TS 15213-4 |
Road transport and traffic telematics After-theft systems for the recovery of stolen vehicles Part 4: Interface and system requirements for long range communication |
|
CEN CEN/TS 15291 |
Identification card system - Guidance on design for accessible card-activated devices |
|
CENELEC CLC/TR 50459-7 |
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine interface - Part 7: Specific Transmission Modules |
|
CEN EN 1332-4 |
Identification Card Systems - Man-Machine Interface - Part 4: Coding of User Requirements for People with Special Needs |
|
CEN EN 14096-1 |
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control |
|
CEN EN 1546-2 |
Identification Card Systems - Inter-Sector Electronic Purse - Part 2: Security Architecture |
|
CEN EN 1546-3 |
Identification Card Systems - Inter-Sector Electronic Purse - Part 3: Data Elements and Interchanges |
|
CENELEC EN 186310 |
Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Connector Sets for Optical Fibres and Cables - Type MF-) |
|
CEN EN 29295 |
Acoustics - Measurement of High-Frequency Noise Emitted by Computer and Business Equipment |
|
CENELEC EN 50083-9 |
Cable networks for television signals, sound signals and interactive services Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams |
|
CEN EN 617 |
Continuous Handling Equipment and Systems - Safety and EMC Requirements for the Equipment for the Storage of Bulk Materials in Silos, Bunkers, Bins and Hoppers |
|
CENELEC EN 61850-10 |
Communication networks and systems in substations Part 10: Conformance testing-IEC 61850-10:2005 |
|
CENELEC EN 61909 |
Audio Recording - Minidisc System-IEC 61909: 2000 |
|
CENELEC EN 62008 |
Performance characteristics and calibration methods for digital data acquisition systems and relevant software-IEC 62008:2005 |
|
CEN EN 726-1 |
Identification Card Systems - Telecommunications Integrated Circuit(s) Cards and Terminals - Part 1: System Overview |
|
CEN EN 753-3 |
Identification Card Systems - Intersector Thin Flexible Cards - Part 3: Test Methods |
|
CEN EN 797 |
Bar Coding - Symbology Specifications - `EAN/UPC´-Incorporates Corrigendum October 1996 |
|
CEN EN 798 |
Bar Coding - Symbology Specifications - ´Codabar´ |
|
CEN EN 841 |
Bar Coding - Symbology Specifications - Format Description |
|
CEN EN ISO 14915-1 |
Software ergonomics for multimedia user interfaces - Part 1: Design principles and framework-ISO 14915-1: 2002 |
|
CEN EN ISO 9241-14 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 14: Menu Dialogues-ISO 9241-14: 1997 |
|
CENELEC HD 311.10 S1 |
Magnetic Tape Sound Recording and Reproducing Systems Part 10: Time and Address Codes |
|
CEN CEN ISO/TS 17574 |
Road transport and traffic telematics - Electronic Fee Collection (EFC) - Guidelines for EFC security protection profiles |
|
CEN CEN ISO/TS 18234-4 |
Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 4: Road Traffic Message (RTM) application-ISO/TS 18234-4:2006 |
|
CEN CEN/TR 15449 |
Geographic information Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructure |
|
CEN CEN/TS 14271 |
Health informatics - File exchange format for vital signs |
|
CEN CEN/TS 14796 |
Health Informatics - Data Types |
|
CEN CEN/TS 14821-8 |
Traffic and Travel Information (TTI) TTI messages via cellular networks Part 8: GSM-specific parameters |
|
CEN CEN/TS 15213-3 |
Road transport and traffic telematics After-theft systems for the recovery of stolen vehicles Part 3: Interface and system requirements for short range communication |
|
CEN CEN/TS 15213-5 |
Road transport and traffic telematics After-theft systems for the recovery of stolen vehicles Part 5: Messaging interface |
|
CEN CEN/TS 15231 |
Open data communication in building automation, controls and building management - Mapping between Lonworks and BACnet |
|
CEN CEN/TS 15448 |
Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) |
|
CEN CEN/TS 15480-1 |
Identification card systems - European Citizen Card - Part 1: Physical, electrical and transport protocol characteristics |
|
CEN CR 13643 |
Machine Readable Cards - Healthcare Applications - Logical Data Structures and Concepts for Different Card Technologies for Use by Patients in Health Applications |
|
CEN CR 13644 |
Machine Readable Cards - Healthcare Applications - Logical Organisation of Data on Healthcare Professional Cards |
|
CEN EN 1064 |
Health informatics - Standard communication protocol - Computer-assisted electrocardiography-Incorporates amendment A1: 03/2007 |
|
CENELEC EN 122110 |
Sectional Specification: Radio Frequency Coaxial Connectors. Series SMA |
|
CEN EN 13606-1 |
Health informatics - Electronic health record communication - Part 1: Reference model |
|
CEN EN 1375 |
Identification card system - Intersector integrated circuit(s) card additional formats - ID-000 card size and physical characteristics-Supersedes ENV 1375-1:1994 |
|
CEN EN 1387 |
Machine Readable Cards - Health Care Applications - Cards: General Characteristics |
|
CEN EN 14116 |
Tanks for transport of dangerous goods - Digital interface for the product recognition device |
|
CENELEC EN 181000 |
Generic Specification: Fibre Optic Branching Devices |
|
CENELEC EN 186300 |
Sectional Specifications: Connector Sets for Optical Fibres and Cables Type MSC |
|
CENELEC EN 61000-4-24 |
Electromagnetic Compatibility (EMC) Part 4: Testing and Measurement Techniques Section 24: Test Methods for Protective Devices for HEMP Conducted Disturbance Basic EMC Publication-IEC 61000-4-24: 1997 |
|
CENELEC EN 61000-4-28 |
Electromagnetic compatibility (EMC) Part 4-28: Testing and measurement techniques Variation of power frequency, immunity test-Includes amendment A1:2004; IEC 61000-4-28:1999 |
|
CENELEC EN 61663-2 |
Lightning Protection - Telecommunication Lines Part 2: Lines Using Metallic Conductors-IEC 61663-2: 2001 |
|
CENELEC EN 61754-22 |
Fibre optic connector interfaces Part 22: Type F-SMA connector family-Supersedes EN 186100: 1994 |
|
CENELEC EN 61754-5 |
Fibre Optic Connector Interfaces Part 5: Type MT Connector Family-IEC 61754-5: 2005 |
|
CENELEC EN 62056-46 |
Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control Part 46: Data Link Layer Using HDLC Protocol-Incorporates Amendment A1: April 2007 |
|
CENELEC EN 62403 |
High density recording format on CD-R/RW disc system - HD-BURN format-IEC 62403:2005 |
|
CEN EN 726-2 |
Identification Card Systems - Telecommunications Integrated Circuit(s) Cards and Terminals - Part 2: Security Framework |
|
CEN EN 726-3 |
Identification Card Systems - Telecommunications Integrated Circuit(s) Cards and Terminals - Part 3: Application Independent Card Requirements |
|
CEN EN 726-7 |
Identification Card Systems - Telecommunications Integrated Circuit(s) Cards and Terminals - Part 7: Security Module |
|
CEN EN 753-2 |
Identification Card Systems - Intersector Thin Flexible Cards - Part 2: Magnetic Recording Technique |
|
CEN EN ISO 14915-3 |
Software ergonomics for multimedia user interfaces Part 3: Media selection and combination-ISO 14915-3: 2002 |
|
CEN EN ISO 9241-11 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 11: Guidance on Usability-Incorporating Amendment N0. 1 |
|
CENELEC ENV 41 001 |
ISDN Connector up to 8 Pins and up to 2,048 M bit/s |
|
CENELEC ENV 50204 |
Radiated Electromagnetic Field from Digital Radio Telephones Immunity Test |
|
CENELEC HD 134.2 S2 |
Radio-Frequency Connectors - Part 2: Coaxial Unmatched Connector |
|
CENELEC HD 134.4 S2 |
Radio-Frequency Connectors - Part 4: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 16 mm (0.63 in) with Screw Lock. Characteristic Impedance 50 Ohms (Type 7-16) |
|
CENELEC HD 593.3 S1 |
CORRIGENDUM Microprocessor System BUS I, 8-Bit and 16-Bit Data Part 3: Mechanical and Pin Descriptions for the Eurocard Configuration with Pin and Socket (Indirect) Connectors |
|
CENELEC CLC/TR 61158-1 |
Digital data communications for measurement and control Fieldbus for use in industrial control systems Part 1: Overview and guidance for the IEC 61158 series-IEC/TR 61158-1:2003 |
|
CEN EN 12063 |
Execution of Special Geotechnical Work - Sheet-Pile Walls |
|
CEN EN 13044 |
Swap Bodies - Coding, Identification and Marking |
|
CEN EN 13757-1 |
Communication system for meters and remote reading of meters Part 1: Data exchange |
|
CEN EN 1828 |
Health informatics - Categorial structure for classifications and coding systems of surgical procedures |
|
CEN EN 1867 |
Machine Readable Cards - Health Care Applications - Numbering System and Registration Procedure for Issuer Identifiers |
|
CEN EN 21864 |
Information Technology - Unrecorded 12,7 mm (0.5 in) Wide Magnetic Tape for Information Interchange - 32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3 200 ftpi) Phase Encoded and 356 ftpmm (9 042 ftpi), NRZ1 (ISO/IEC 1864 : 1992) |
|
CEN EN 26098 |
Information Processing - Self-Loading Cartridges for 12,7 mm (0,5 in) Wide Magnetic Tape (ISO 6098 : 1984) |
|
CEN EN 27487(PART 2) |
Information Processing Data Interchange on 130 mm (5.25in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7 958 ftprad, 19 tpmm (48tpi) on Both Sides Part 2: Track Format A |
|
CEN EN 28630-1 |
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 13 262 ftprad, on 80 Tracks Each Side Part 1 Dimensional, Physical and Magnetic Characteristics; (ISO 8630-1 : 1987, Ed. 1) |
|
CEN EN 28630-2 |
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 13 262 ftprad, on 80 Tracks Each Side Part 2 Track Format A for 77 Tracks-Includeds Amendment A1:1998; ISO 8630-2:1987 |
|
CEN EN 28630-3 |
Information Processing - Data Interchange on 130 mm (5.25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 13 262 ftprad, on 80 Tracks Each Side Part 3 Track Format B for 80 Tracks; (ISO 8630-3 : 1987) |
|
CEN EN 30149 |
Information Processing Systems -- Data Interchange on Read-Only 120 mm Optical Data Disks (CD-ROM) |
|
CENELEC EN 50065-2-1 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments-Incorporating corrigendum August 2003 |
|
CENELEC EN 50083-7 |
Cable Networks for Television Signals, Sound Signals and Interactive Services - Part 7: System Performance-Including Amendment A1:2000; Incorporating Corrigendum December 2005 |
|
CENELEC EN 50117-2-4 |
Coaxial cables Part 2-4: Sectional specification for cables used in cabled distribution networks Indoor drop cables for systems operating at 5 MHz - 3 000 MHz |
|
CENELEC EN 50147-1 |
Anechoic Chambers Part 1: Shield Attenuation Measurement |
|
CENELEC EN 50289-1-13 |
Communication cables Specifications for test methods Part 1-13: Electrical test methods Coupling attenuation or screening attenuation of patch cords / coaxial cable assemblies / pre-connectorised cables |