|
CENELEC EN 50005 |
Low Voltage Switchgear and Controlgear for Industrial Use: Terminal Marking and Distinctive Number: General Rules |
|
CENELEC EN 50121-1 |
Railway applications - Electromagnetic compatibility Part 1: General |
|
CENELEC EN 50264-2 |
Railway applications Railway rolling stock cables having special fire performance Standard wall Part 2: Single core cables |
|
CENELEC EN 60044-2 |
Instrument Transformers - Part 2: Inductive Voltage Transformers-Includes Amendments A1:2000 and A2:2003; Supersedes HD 554 S1:1992; IEC 60044-2:1997 + A1:2000 + A2:2002, Modified |
|
CENELEC EN 60064 |
Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes - Performance Requirements-Includes Amendment A2: January 2003 and Amendment A3: May 2006; IEC 60064:1993 + A2:2002, modified |
|
CENELEC EN 60076-1/PRAA |
AMD prAA Power Transformers Part 1: General |
|
CENELEC EN 60076-11 |
Power transformers Part 11: Dry-type transformers-IEC 60076-11:2004; Supersedes EN 60726:2003 |
|
CENELEC EN 60077-1 |
Railway applications - Electric equipment for rolling stock Part 1: General service conditions and general rules-IEC 60077-1:1999, modified |
|
CENELEC EN 60095-4 |
Lead-Acid Starter Batteries Part 4: Dimensions of Batteries for Heavy Commercial Vehicles-IEC 95-4 : 1989, Modified |
|
CENELEC EN 60127-5 |
Miniature Fuses Part 5: Guidelines for Quality Assessment of Miniature Fuse-Links |
|
CENELEC EN 60216-5 |
Electrical insulating materials Thermal endurance properties Part 5: Determination of relative thermal endurance index (RTE) of an insulating material-Supersedes HD 611.5 S1:1992; IEC 60216-5:2003 |
|
CENELEC EN 60320-2-3 |
Appliance Coupler for Household and Similar General Purposes Part 2-3: Appliance Coupler with a Degree of Protection Higher Than IPX0-Includes amendment A1:2005 |
|
CENELEC EN 60320-2-4 |
Appliance couplers for household and similar general purposes Part 2-4: Couplers dependent on appliance weight for engagement-IEC 60320-2-4:2005 |
|
CENELEC EN 60352-1 |
Solderless Connections Part 1: Wrapped Connections - General Requirements, Test Methods and Practical Guidance-IEC 60352-1: 1997 |
|
CENELEC EN 60669-2-1 |
Switches for household and similar fixed electrical installations Part 2-1: Particular requirements Electronic switches-IEC 60669-2-1:2002, modified |
|
CENELEC EN 60695-11-20 |
Fire Hazard Testing - Part 11-20: Test Flames - 500 W Flame Test Methods-Includes amendment A1:2003; IEC 60695-11-20:1999 + A1:2003; Partly Supersedes HD 441 S1:1983 |
|
CENELEC EN 60695-2-4/0 |
Fire Hazard Testing Part 2: Test Methods Section 4/Sheet 0: Diffusion Type and Premixed Type Flame Test Methods (IEC 695-2-4/0 : 1991) |
|
CENELEC EN 60715 |
Dimensions of Low-Voltage Switchgear and Controlgear - Standardized Mounting on Rails for Mechanical Support of Electrical Devices in Switchgear and Controlgear Installations-IEC 60715:1981 + A1:1995 |
|
CENELEC EN 60730-2-3 |
Automatic Electrical Controls for Household and Similar Use - Part 2-3: Particular Requirements for Thermal Protectors for Ballasts for Tubular Fluorescent Lamps-Incorporates Amendment A1:1998; Amendment A2:2001; Amendment A11: 2005; Incorporating Corrigendum March 2001 |
|
CENELEC EN 60896-1/ A2 |
AMD 2 Stationary Lead-Acid Batteries - General Requirements and Methods of Test Part 1: Vented Types |
|
CENELEC EN 60947-5-4 |
Low-voltage switchgear and controlgear Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests-IEC 60947-5-4:2002 |
|
CENELEC EN 61241-14 |
Electrical apparatus for use in the presence of combustible dust Part 14: Selection and installation-IEC 61241-14:2004; Partly supersedes EN 50281-1-2:1998 + A1:2002 |
|
CENELEC EN 61241-17 |
Electrical apparatus for use in the presence of combustible dust Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)-Partially supersedes EN 50281-1-2:1998; IEC 61241-17:2005 |
|
CENELEC EN 61243-1 |
Live working Voltage detectors Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.-IEC 61243-1: 2003 |
|
CENELEC EN 61496-3 |
Safety of Machinery - Electro-Sensitive Protective Equipment Part 3: Particular Requirements for Active Opto-Electronic Protective Devices Responsive to Diffuse Reflection (AOPDDR)-IEC 61496-3:2001; |
|
CENELEC EN 61557-10 |
Electrical Safety in Low Voltage Distribution Systems Up to 1 000 V A.C. and 1 500 V D.C. - Equipment for Testing, Measuring or Monitoring of Protective Measures Part 10: Combined Measuring Equipment for Testing, Measuring or Monitoring of Protective Measures-IEC 61557-10:2000 |
|
CENELEC EN 61558-2-20 |
Safety of Power Transformers, Power Supply Units and Similar Devices - Part 2-20: Particular Requirements for Small Reactors-IEC 61558-2-20: 2000 |
|
CENELEC EN 61810-2 |
Electromechanical elementary relays Part 2: Reliability-IEC 61810-2: 2005; Supersedes EN 60255-23: 1996 |
|
CENELEC HD 22.4 S3/A1 |
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 4: Cords and Flexible Cables |
|
CENELEC HD 27 |
Colours of the Cores of Flexible Cables and Cords |
|
CENELEC HD 308 |
Identification and Use of Cores of Flexible Cables |
|
CENELEC CLC/TR 50126-3 |
Railway applications – The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Part 3: Guide to the application of EN 50126-1 for rolling stock RAMS |
|
CEN CLC/TS 60034-20-1 |
Rotating electrical machines Part 20-1: Control motors - Stepping motors |
|
CENELEC CLC/TS 60034-20-1 |
Rotating electrical machines Part 20-1: Control motors - Stepping motors-IEC/TS 60034-20-1:2002 |
|
CEN EN 13160-6 |
Leak detection systems - Part 6: Sensors in monitoring wells |
|
CENELEC EN 50086-1 |
Conduit systems for cable management Part 1: General requirements-Incorporating corrigendum February 2001 |
|
CENELEC EN 50146 |
Cable Ties for Electrical Installations |
|
CENELEC EN 50191 |
Erection and Operation of Electrical Test Equipment |
|
CENELEC EN 60076-13 |
Power transformers Part 13: Self-protected liquid-filled transformers-IEC 60076-13:2006 |
|
CENELEC EN 60086-3 |
Primary Batteries Part 3: Watch Batteries-IEC 60086-3:2004 |
|
CENELEC EN 60216-6 |
Electrical insulating materials - Thermal endurance properties Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method-IEC 60216-6:2006 |
|
CENELEC EN 60228 |
Incorporates Corrigendum: May 2005 |
|
CENELEC EN 60255-21-2 |
Electrical Relays Part 21: Vibration, Shock, Bump and Seismic Tests on Measuring Relays and Protection Equipment Section 2: Shock and Bump Tests (IEC 255-21-2 : 1988) |
|
CENELEC EN 60269-4 |
Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices |
|
CENELEC EN 60360 |
Standard Method of Measurement of Lamp Cap Temperature Rise-IEC 60360: 1998 |
|
CENELEC EN 60598-2-17 |
Luminaires Part 2: Particular Requirements Section Seventeen - Luminaires for Stage Lighting Television and Film Studios (Outdoor and Indoor) |
|
CENELEC EN 60598-2-24 |
Luminaires Part 2: Particular Requirements Section 24: Luminaires with Limited Surface Temperatures-IEC 60598-2-24: 1997, Modified |
|
CENELEC EN 60695-7-1 |
Fire hazard testing Part 7-1: Toxicity of fire effluent General guidance-IEC 60695-7-1:2004 |
|
CENELEC EN 60896-11 |
Stationary lead-acid batteries Part 11: Vented types - General requirements and methods of tests-IEC 60896-11:2002; Supersedes EN 60896-1:1991 + A2:1992 |
|
CENELEC EN 60896-2 |
Stationary Lead-Acid Batteries General Requirements and Methods of Test Part 2: Valve Regulated Types (IEC 896-2 : 1995)-Superseded by EN 60896-21:2004 |
|
CENELEC EN 60947-5-7 |
Low-voltage switchgear and controlgear Part 5-7: Control circuit devices and switching elements Requirements for proximity devices with analogue output-Supersedes EN 50319:1999; IEC 60947-5-7:2003 |
|
CENELEC EN 60947-5-8 |
Low-voltage switchgear and controlgear Part 5-8: Control circuit devices and switching elements - Three-position enabling switches |
|
CENELEC EN 61347-2-10 |
Lamp Controlgear Part 2-10: Particular Requirements for Electronic Invertors and Convertors for High-Frequency Operation of Cold Tubular Discharge Lamps (Neon Tubes)-IEC 61347-2-10:2000 |
|
CENELEC EN 61557-2 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance |
|
CENELEC EN 61557-9 |
Electrical Safety in Low Voltage Distribution Systems up to 1 kV a.c. and 1,5 kV d.c. Equipment for Testing, Measuring or Monitoring of Protective Measures Part 9: Equipment for Insulation Fault Location in IT Systems-IEC 61557-9: 1999 |
|
CENELEC EN 61663-2 |
Lightning Protection - Telecommunication Lines Part 2: Lines Using Metallic Conductors-IEC 61663-2: 2001 |
|
CENELEC EN 62023 |
Structuring of Technical Information and Documentation-IEC 62023:2000 |
|
CEN EN 62259 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes Nickel-cadmium prismatic secondary single cells with partial gas recombination-(IEC 62259:2003) |
|
CENELEC EN 62310-1 |
Static transfer systems (STS) Part 1: General and safety requirements-IEC 62310-1:2005 |
|
CENELEC HD 21.7 S1 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750V Part 7: Single Core Non-Sheathed Cables for Internal Wiring for a Conductor Temperature of 90 Degrees Celsius |
|
CENELEC EN 50086-2-3 |
Conduit Systems for Cable Management - Part 2-3: Particular Requirements for Flexible Conduit Systems-Includes Amendment A11: 1998; Incorporating Corrigendum February 2001 |
|
CENELEC EN 50121-5 |
Railway applications - Electromagnetic compatibility Part 5: Emission and immunity of fixed power supply installations and apparatus |
|
CENELEC EN 50347 |
General Purpose Three-Phase Induction Motors Having Standard Dimensions and Outputs - Frame Numbers 56 to 315 and Flange Numbers 65 to 740-Supersedes HD 231 S1: 1974 |
|
CENELEC EN 60068-3-4 |
Environmental Testing - Part 3-4: Supporting Documentation and Guidance - Damp Heat Tests-IEC 60068-3-4:2001; Supersedes HD 323.2.28 S1:1988 |
|
CENELEC EN 60076-10 |
Power Transformers Part 10: Determination of Sound Levels-IEC 60076-10:2001; Supersedes EN 60551:1992 + A1:1997 |
|
CENELEC EN 60357 |
Tungsten halogen lamps (non-vehicle) - Performance specifications-IEC 60357: 2002, modified |
|
CENELEC EN 60439-3 |
Low-Voltage Switchgear and Controlgear Assemblies - Part 3: Particular Requirements for Low-Voltage Switchgear and Controlgear Assemblies Intended to be Installed in Places Where Unskilled Persons Have Access for Their Use - Distribution Boards-Includes Amendments A1: 1994 and A2: 2001; IEC 60439-3: 1990, Modified; Incorporates Corrigendum April 1994 and December 2005 |
|
CENELEC EN 60695-1-30 |
Fire hazard testing Part 1-30: Guidance for assessing the fire hazard of electrotechnical products Use of preselection testing procedures-IEC 60695-1-30: 2002 |
|
CENELEC EN 61347-2-13 |
Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules-IEC 61347-2-13:2006 |
|
CENELEC EN 61557-3 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance |
|
CENELEC EN 61557-4 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding |
|
CENELEC EN 61557-7 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence |
|
CENELEC EN 62281 |
Safety of primary and secondary lithium cells and batteries during transport-IEC 62281:2004 |
|
CENELEC HD 22.3 S2 |
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 3: Heat Resistant Silicone Rubber Insulated Cables (Reprint Incorporating A1) |
|
CENELEC HD 22.8 S1/ A2 |
AMD 2 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 8: Polychloroprene or Equivalent Synthetic Elastomer Sheathed Cables for Use as Decorative Chains |
|
CENELEC HD 345 |
Test of the Insulation of Bars and Coils of High Voltage Machines-Superseded by EN 50209: 1999 |
|
CENELEC CLC/TS 61643-12 |
Low-voltage surge protective devices Part 12: Surge protective devices connected to low-voltage power systems – Selection and application principles-IEC 61643-12:2002, modified |
|
CEN EN 14986 |
Design of fans working in potentially explosive atmospheres |
|
CENELEC EN 50181 |
Plug-in Type Bushings Above 1 kV up to 36 kV and from 250 A to 1,25 kA for Equipment Other Than Liquid Filled Transformers |
|
CENELEC EN 50216-1 |
Power Transformer and Reactor Fittings Part 1: General |
|
CENELEC EN 50244 |
Electrical Apparatus for the Detection of Combustible Gases in Domestic Premises - Guide on the Selection, Installation, Use and Maintenance |
|
CENELEC EN 50394-1 |
Electrical apparatus for potentially explosive atmospheres Group I Intrinsically safe systems Part 1: Construction and testing |
|
CENELEC EN 50396 |
Non electrical test methods for low voltage energy cables-Partially Supersedes HD 21.2.S3: 1997 & HD 22.2 S3: 1997 |
|
CENELEC EN 50423-1 |
Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV Part 1: General requirements Common specifications |
|
CENELEC EN 60068-3-5 |
Environmental Testing Part 3-5: Supporting Documentation and Guidance - Confirmation of the Performance of Temperature Chambers-IEC 60068-3-5: 2001 |
|
CENELEC EN 60081 |
Double-Capped Fluorescent Lamps - Performance Specifications-Includes amendment A1:2002 and A2:2003; IEC 60081:1997 + A1:2000 and A2:2003 |
|
CENELEC EN 60099-4 |
Surge arresters Part 4: Metal-oxide surge arresters without gaps for a.c. systems-Includes amendment A1: October 2006; IEC 60099-4:2004, modified |
|
CENELEC EN 60099-5 |
Surge Arresters - Part 5: Selection and Application Recommendations-Including Amendment A1: 1999; IEC 60099-5: 1996 + A1: 1999, Modified |
|
CENELEC EN 60216-4-3 |
Electrical Insulating Materials - Thermal Endurance Properties Part 4-3: Ageing Ovens - Multi-Chamber Ovens-IEC 60216-4-3:2000 |
|
CENELEC EN 60238 |
Edison screw lampholders-IEC 60238:2004; Incorporates Corrigendum January 2005 |
|
CENELEC EN 60254-1 |
Lead-acid traction batteries Part 1: General requirements and methods of test-IEC 60254-1:2005 |
|
CENELEC EN 60254-2 |
Lead-Acid Traction Batteries - Part 2: Dimensions of Cells and Terminals and Marking of Polarity on Cells-Includes Amendment A1: 2000; IEC 60254-2:1997 + A1: 2000; Supersedes HD 465.2 S1:1987; |
|
CENELEC EN 60332-1-3 |
Tests on electric and optical fibre cables under fire conditions Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles |
|
CENELEC EN 60335-2-72 |
Safety of Household and Similar Electrical Appliances - Part 2-72: Particular Requirements for Automatic Machines for Floor Treatment for Commercial and Industrial Use-Includes Amendment A1:2000; IEC 60335-2-72:1995+A1:2000, Modified |
|
CENELEC EN 60454-1 |
Specifications for Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 1: General Requirements (IEC 454-1:1992) |
|
CENELEC EN 60695-10-3 |
Fire Hazard Testing Part 10-3: Abnormal Heat Mould Stress Relief Distortion Test-IEC 60695-10-3: 2002 |
|
CENELEC EN 60695-8-1 |
Fire Hazard Testing Part 8-1: Heat Release - General Guidance-IEC 60695-8-1:2001 |
|
CENELEC EN 60811-1-2 |
Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables - Part 1: General Application Section 2: Thermal Ageing Methods-Includes Amendment A2:2000; IEC 811-1-2:1985 + Corrigendum May 1986 + A1:1989; Supersedes HD 505.1.2 S2:1991 |
|
CENELEC EN 60851-6 |
Winding wires Test methods Part 6: Thermal properties-Includes amendment A1:1997 and A2:2004; IEC 60851-6:1996 + A1:1997 + A2:2003; Supersedes HD 490.6 S1:1987 |
|
CENELEC EN 60898-2 |
Circuit-Breakers for Overcurrent Protection for Household and Similar Installations Part 2: Circuit-Breakers for A.C. and D.C. Operation-IEC 60898-2:2000 + A1:2003, modified |
|
CENELEC EN 61034-2 |
Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements-IEC 61034-2: 2005; Supersedes EN 50268-2: 1999 |
|
CENELEC EN 61243-3 |
Live Working - Voltage Detectors - Part 3: Two-Pole Low Voltage Type-Incorporating Corrigendum February 2002; IEC 61243-3:1998; |
|
CENELEC EN 61340-2-1 |
Electrostatics Part 2-1: Measurement methods Ability of materials and products to dissipate static electric charge-IEC 61340-2-1: 2002 |
|
CENELEC EN 61347-2-7 |
Lamp Controlgear Part 2-7: Particular Requirements for D.C. Supplied Electronic Ballasts for Emergency Lighting |
|
CENELEC EN 61477 |
Live working - Minimum requirements for the utilization of tools, devices and equipment-IEC 61477:2001 + A1:2002 + A2:2004; Includes amendments A1:2002 and A2:2005 |
|
CENELEC EN 61857-22 |
English version Electrical insulation systems - Procedures for thermal evaluation Part 22: Specific requirements for encapsulated-coil model - Wire-wound electrical insulation system (EIS)-IEC 61857-22:2002 |
|
CENELEC EN 61959 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes Mechanical tests for sealed portable secondary cells and batteries-IEC 61959: 2004; Partially supersedes EN 61960-1:2001 & EN 61960-2:2001; Incorporates Corrigendum June 2004; |
|
CEN EN 62384 |
DC or AC supplied electronic control gear for LED modules - Performance requirements |
|
CEN EN ISO 10807 |
Pipework - Corrugated Flexible Metallic Hose Assemblies for the Protection of Electrical Cables in Explosive Atmosphere-ISO 10807:1994 |
|
CENELEC HD 21.3 S3 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 3: Non-Sheathed Cables for Fixed Wiring |
|
CENELEC HD 22.11 S1 |
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 11: EVA Cords and Flexible Cables |
|
CENELEC HD 22.3 S3 |
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 3: Heat Resistant Silicone Rubber Insulated Cables (IEC 245-3:1980, Modified) |
|
CENELEC HD 538.1 S1 |
Three-Phase Dry-Type Distribution Transformers 50 Hz, from 100 to 2 500 kVA, with Highest Voltage for Equipment not Exceeding 36 kV Part 1: General Requirements and Requirements for Transformers with High. Voltage for Equipment Not Exceeding 24 kV |
|
CENELEC HD 604 S1 |
0.6/1 kV Power Cables with Special Fire Performance for Use in Power Stations |
|
CENELEC HD 630.2.1 S3 |
Low-Voltage Fuses Part 2-1: Supplementary Requirements for Fuses for Use by Authorized Persons (Fuses Mainly for Industrial Application) Sections I to V: Examples of Types of Standardized Fuses for Use by Authorized Persons-IEC 60269-2-1:1996, Modified |
|
CENELEC EN 50041 |
Low Voltage Switchgear and Controlgear for Industrial Use: Control Switches: Position Switches 42,5x80: Dimensions and Characteristics |
|
CENELEC EN 50107-1 |
Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV Part 1: General requirements-Including amendment A1:2004 |
|
CENELEC EN 50121-2 |
Railway applications - Electromagnetic compatibility Part 2: Emission of the whole railway system to the outside world |
|
CENELEC EN 50121-4 |
Railway applications - Electromagnetic compatibility Part 4: Emission and immunity of the signalling and telecommunications apparatus |
|
CENELEC EN 50125-3 |
Railway applications - Environmental conditions for equipment Part 3: Equipment for signalling and telecommunications |
|
CENELEC EN 50149 |
Railway applications Fixed installations Electric traction Copper and copper alloy grooved contact wires-Incorporating Corrigendum December 2005 |
|
CENELEC EN 50182 |
Conductors for overhead lines - Round wire concentric lay stranded conductors-Incorporates Corrigendum April 2004 |
|
CENELEC EN 50209 |
Test of Insulation of Bars and Coils of High-Voltage Machines-Supersedes HD 345 S1: 1976 |
|
CENELEC EN 50216-3 |
Power transformer and reactor fittings Part 3: Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion-Includes amendment A1:December 2002; A2:October 2006; |
|
CENELEC EN 50281-2-1 -C1 |
Corrigendum to EN 50281-2-1:1998-Ratified European Text |
|
CENELEC EN 50388 |
Railway applications Power supply and rolling stock Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability |
|
CENELEC EN 50395 |
Electrical test methods for low voltage energy cables-Partly supersedes HD 21.2 S3:1997 + A1:2002 and HD 22.2 S3:1997 + A1:2002 |
|
CENELEC EN 60079-30-2 |
Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance |
|
CENELEC EN 60086-5 |
Primary batteries Part 5: Safety of batteries with aqueous electrolyte-IEC 60086-5:2005 |
|
CENELEC EN 60137 |
Insulated bushings for alternating voltages above 1 000 V-IEC 60137:2003 |
|
CENELEC EN 60155 |
Glow-Starters for Fluorescent Lamps (IEC 155:1993)-Includes Amendments A1: 12/1995; A2: 1/2007 |
|
CENELEC EN 60216-4-2 |
Electrical Insulating Materials - Thermal Endurance Properties Part 4-2: Ageing Ovens - Precision Ovens for Use up to 300 Degrees Celsius-IEC 60216-4-2:2000 |
|
CENELEC EN 60230 |
Impulse Tests on Cables and Their Accessories-IEC 60230: 1966; Supersedes HD 48 S1: 1977 |
|
CENELEC EN 60243-3 |
Electric Strength of Insulating Materials - Test Methods - Part 3: Additional Requirements for 1,2/50 US Impulse Tests-IEC 60243-3:2001 |
|
CENELEC EN 60255-22-5 |
Electrical Relays Part 22-5: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Surge Immunity Test-IEC 60255-22-5: 2002 |
|
CENELEC EN 60439-4 |
Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites (ACS)-IEC 60439-4:2004 |
|
CENELEC EN 60470 |
High-Voltage Alternating Current Contactors and Contactor-Based Motor Starters-IEC 60470:2000 |
|
CENELEC EN 60505 |
Evaluation and qualification of electrical insulation systems-IEC 60505:2004 |
|
CENELEC EN 60601-2-41 |
Medical electrial equipment Part 2-41: Particular Requirements for the Safety of Surgical Iuminaires and Luminaires for Diagnosis-IEC 60601-2-41:2000 |
|
CENELEC EN 60695-9-1 |
Fire Hazard Testing - Part 9-1: Surface Spread of Flame - General Guidance-IEC 60695-9-1: 2005 |
|
CENELEC EN 60896-21 |
Stationary lead-acid batteries Part 21: Valve regulated types Methods of test-IEC 60896-21:2004; Supersedes EN 60896-2:1996 |
|
CENELEC EN 60900 |
Live working Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.-IEC 60900:2004 |
|
CENELEC EN 61175 |
Industrial systems, installations and equipment and industrial products Designation of signals-IEC 61175:2005 |
|
CENELEC EN 61347-2-12 |
Lamp controlgear Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)-IEC 61347-2-12:2005 |
|
CENELEC EN 61378-1 |
Convertor Transformers Part 1: Transformers for Industrial Applications-IEC 61378-1:1997 |
|
CENELEC EN 61809 |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Alkaline Secondary Cells and Batteries-IEC 61809:2000; Superseded by EN 62133: 4/2003 |
|
CENELEC EN 61821 |
Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits-IEC 61821:2002 |
|
CENELEC EN 61982-3 |
Secondary Batteries for the Propulsion of Electric Road Vehicles Part 3: Performance and Life Testing (Traffic Compatible, Urban Use Vehicles) |
|
CEN EN ISO 5826 |
Resistance Welding Equipment - Transformers - General Specifications Applicable to All Transformers-ISO 5826:1999 |
|
CENELEC HD 21.2 S2/ A2 |
AMD 2 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 2: Test Methods |
|
CENELEC HD 21.3 S2 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 3: Single Core Non-Sheathed Cables for Fixed Wiring |
|
CENELEC HD 21.9 S1 |
Polyvinyl Chloride Insulated Cables of Rated Voltages Single Core Non-Sheathed Cable for Installation at Low Temperature |
|
CENELEC HD 22.6 S1 |
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 6: Arc Welding Cables |
|
CENELEC HD 22.7 S2 |
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 7: Cables with Increased Heat Resistance for Internal Wiring for a Conductor Temperature of 110 Degrees C |
|
CENELEC HD 354 S2 |
Colours of Indicator Lights and Push-Buttons |
|
CENELEC HD 444.2.2 |
Fire Hazard Testing Part 2: Test Methods Meedle- Flame Test |
|
CENELEC HD 516 S1 |
Guide to Use of Low Voltage Harmonized Cables |
|
CENELEC HD 53.1 S2 |
Rotating Electrical Machines - Part 1: Rating and Performance |
|
CENELEC HD 53.8 S4 |
Rotating Electrical Machines Part 8: Terminal Markings and Direction of Rotation of Rotating Machines (IEC 34-8:1972 + A1: 1990) |
|
CENELEC CLC/TR 50373 |
Wind turbines Electromagnetic compatibility |
|
CENELEC CLC/TR 50489 |
Smart tracker chips - Feasibility study on the inclusion of RFID in Electrical and Electronic Equipment for WEEE management |
|
CEN EN 10342 |
Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations |
|
CENELEC EN 50011 |
Low Voltage Switchgear and Controlgear for Industrial Use Terminal Marking, Distinctive Number and Distinctive Letter for Particular Contactor Relays |
|
CENELEC EN 50012 |
Low Voltage Switchgear and Controlgear for Industrial Use Terminal Marking and Distinctive Number for Auxiliary Contacts of Particular Contactors |
|
CENELEC EN 50066 |
Mini-Couplers for the Interconnection of Electrical Mains Supplied Equipment in Road Vehicles |
|
CEN EN 50107-2 |
Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV Part 2: Requirements for earth-leakage and open-circuit protective devices |
|
CENELEC EN 50121-3-1 |
Railway Applications - Electromagnetic Compatibility - Part 3-1: Rolling Stock - Train and Complete Vehicle |
|
CENELEC EN 50238 |
Railway applications - Compatibility between rolling stock and train detection systems |
|
CENELEC EN 50342-1 |
Lead-acid starter batteries Part 1: General requirements and methods of test |
|
CENELEC EN 50428 |
Switches for household and similar fixed electrical installations – Collateral standard – Switches and related accessories for use in home and building electronic systems (HBES)-Incorporates Amendment A1: October 2007 |
|
CENELEC EN 60068-3-6 |
Environmental Testing - Part 3-6: Supporting Documentation and Guidance - Confirmation of the Performance of Temperature/Humidity Chambers-IEC 60068-3-6: 2001 |
|
CENELEC EN 60214-1 |
Tap-changers Part 1: Performance requirements and test methods-IEC 60214-1: 2003 |
|
CENELEC EN 60243-2 |
Electric Strength of Insulating Materials - Test Methods Part 2: Additional Requirements for Tests Using Direct Voltage-Supersedes HD 559.2 S1:1991; IEC 60243-2:2001 |
|
CENELEC EN 60255-22-4 |
Electrical Relays Part 22-4: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Electrical Fast Transient/Burst Immunity Test-IEC 60255-22-4: 2002 |
|
CENELEC EN 60269-2 |
Low-Voltage Fuses - Part 2: Supplementary Requirements for Fuses for Use by Authorized Persons (Fuses Mainly for Industrial Application)-Includes Amendment A1:1998 and A2:2002; IEC 60269-2:1986 + A1:1995 + A2:2001 |
|
CENELEC EN 60432-1 |
Incandescent Lamps - Safety Specifications Part 1: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes-IEC 60432-1: 1999 + A1:2005, Modified; A1: May 2005 |
|
CENELEC EN 60454-2 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test |
|
CENELEC EN 60454-3-2 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Polyester Film Tapes with Rubber Thermosetting or Acrylic Crosslinked Adhesives-IEC 60454-3-2:1998 |
|
CENELEC EN 60670-1 |
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General requirements-IEC 60670-1:2002 + corrigendum 2003, modified |
|
CENELEC EN 60695-5-1 |
Fire hazard testing Part 5-1: Corrosion damage effects of fire effluent - General guidance-IEC 60695-5-1:2002 |
|
CENELEC EN 60811-3-2 |
Insulating and sheathing materials of electric cables Common test methods Part 3: Methods specific to PVC compounds Section 2: Loss of mass test Thermal stability test-IEC 60811-3-2:1985 + corrigendum May 1986 + A1:1993 + A2:2003; Supersedes HD 505.3.2S1:1998 |
|
CENELEC EN 60947-7-3 |
Low-voltage switchgear and controlgear Part 7-3: Ancillary equipment Safety requirements for fuse terminal blocks-IEC 60947-7-3:2002 |
|
CENELEC EN 60947-8 |
Low-voltage switchgear and controlgear Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines-IEC 60947-8:2003 |
|
CEN EN 60947-8 |
Low-voltage switchgear and controlgear — Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines-Amendment 1:November 2006 |
|
CENELEC EN 61008-2-1 |
Residual Current Operated Circuit-Breakers without Integral Overcurrent Protection for Household and Similar Uses (RCCB´s) Part 2-1: Applicability of the General Rules to RCCB´s Functionally Independent of Line Voltage-Includes Amendment A11: 1998; IEC 1008-2-1: 1990, Mod |
|
CENELEC EN 61044 |
Opportunity-Charging of Lead-Acid Traction Batteries (IEC 1044 : 1990) |
|
CENELEC EN 61236 |
Saddles, Pole Clamps (Stick Clamps) and Accessories for Live Working-IEC 61236:1993, Modified |
|
CENELEC EN 61316 |
Industrial Cable Reels-IEC 61316: 1999 |
|
CENELEC EN 61808 |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Sealed Nickel-Metal Hydride Button Rechargeable Single Cells-IEC 61808:1999; Superseded by EN 61951-2: 2003 |
|
CENELEC EN 61812-1 |
Specified Time Relays for Industrial Use Part 1: Requirements and Tests-Includes Amendment A11: 1999 |
|
CENELEC EN 62034 |
Automatic test systems for battery powered emergency escape lighting |
|
CENELEC HD 21.2 S2/ A3 |
AMD 3 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 2: Test Methods |
|
CENELEC HD 21.8 S1/ A2 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 8: Single Core Non- Sheathed Cables for Decorative Chains |
|
CENELEC HD 22.14 S1 |
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 14: Cords for Applications Requiring High Flexibility |
|
CENELEC HD 22.7 S1 |
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 7: Cables with Increased Heat Resistance for Internal Wiring for a Conductor Temperature of 110 Degrees C (Reprint Incorporating A1) |
|
CENELEC HD 53.8 S3 |
Rotating Electrical Machines - Part 8: Terminal Markings and Direction of Rotation of Rotating Machines |
|
CENELEC HD 53.8 S3/ A1 |
AMD 8 Rotating Electrical Machines - Part 8: Terminal Markings and Direction of Rotation of Rotating Machines |
|
CENELEC HD 605 S1 |
Electrical Cables - Additional Test Methods |
|
CENELEC HD 625.1 S1 |
Insulation Coordination for Equipment within Low-Voltage Systems Part 1: Principles, Requirements and Tests-Superseded by EN 60664-1:2003 |
|
CEN EN 10252 |
Magnetic Materials - Methods of Measurement of Magnetic Properties of Magnetic Steel Sheet and Strip at Medium Frequencies |
|
CEN EN 1048 |
Heat Exchangers - Air Cooled Liquid Coolers |
|
CEN EN 12465 |
Wood Poles for Overhead Lines - Durability Requirements |
|
CENELEC EN 50040 |
Low Voltage Switchgear and Controlgear for Industrial Use. Inductive Proximity Switches. Form A, for Direct Current, 2 Terminals |
|
CENELEC EN 50124-1 |
Railway applications Insulation coordination Part 1: Basic requirements Clearances and creepage distances for all electrical and electronic equipment-Includes amendments A1:2003 and A2:2005 |
|
CENELEC EN 50125-2 |
Railway applications - Environmental conditions for equipment Part 2: Fixed electrical installations |
|
CEN EN 50244 |
Electrical Apparatus for the Detection of Combustible Gases in Domestic Premises - Guide on the Selection, Installation, Use and Maintenance |
|
CENELEC EN 50262 |
Cable glands for electrical installations-Includes amendments A1:2001 and A2:2004 |
|
CENELEC EN 50295 |
Low-Voltage Switchgear and Controlgear - Controller and Device Interface Systems - Actuator Sensor Interface (AS-i) |
|
CENELEC EN 50336 |
Bushings for transformers and reactor cable boxes not exceeding 36 kV |
|
CENELEC EN 50368 |
Cable cleats for electrical installations |
|
CENELEC EN 50423-2 |
Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV Part 2: Index of National Normative Aspects |
|
CENELEC EN 60076-4 |
Power Transformers Part 4: Guide to the Lightning Impulse and Switching Impulse Testing Power Transformers and Reactors-IEC 60076-4: 2002 |
|
CENELEC EN 60076-5 |
Power transformers Part 5: Ability to withstand short-circuit-IEC 60076-5:2006 |
|
CENELEC EN 60146-1-3 |
Semiconductor Convertors General Requirements and Line Commutated Convertors Part 1-3: Transformers and Reactors (IEC 146-1-3:1991) |
|
CENELEC EN 60439-5 |
Low-voltage switchgear and controlgear assemblies Part 5: Particular requirements for assemblies for power distribution in public networks-IEC 60439-5:2006; Supersedes EN 50300:2004 |
|
CENELEC EN 60695-6-1 |
Fire hazard testing Part 6-1: Smoke obscuration – General guidance-(IEC 60695-6-1):2005 |
|
CENELEC EN 60831-1 |
Shunt power capacitors of the self-healing type for a.c. system shaving a rated voltage up to and including 1 kV Part 1: General Performance, testing and rating Safety requirements Guide for installation and operation-Includes Amendment A1:2003; IEC 831-1:1996 + A1:2002 |
|
CENELEC EN 60947-6-2 |
Low-voltage switchgear and controlgear Part 6-2: Multiple function equipment – Control and protective switching devices (or equipment) (CPS)-Incorporates Amendment A1: March 2007 |
|
CENELEC EN 61056-2 |
General purpose lead-acid batteries (valve-regulated types) Part 2: Dimensions, terminals and marking-IEC 61056-2: 2002 |
|
CENELEC EN 61058-2-1 |
Switches for appliances Part 2-1: Particular requirements for cord switches-Includes amendments A1:1996 + A11: 2002; IEC 1058-2-1:1992 + A1:1995 |
|
CENELEC EN 61058-2-4 |
Switches for appliances Part 2-4: Particular requirements for independently mounted switches-IEC 61058-2-4: 1995 |
|
CENELEC EN 61173 |
Overvoltage Protection for Photovoltaic (PV) Power Generating Systems - Guide (IEC 1173 : 1992) |
|
CENELEC EN 61184 |
Bayonet Lampholders-Including amendments A1:2001 and A2:2004; IEC 61184:1997 + A1:2000 + A2:2004 |
|
CENELEC EN 61185 |
Ferrite cores (ETD-cores) intended for use in power supply applications - Dimensions-IEC 61185:2005 |
|
CENELEC EN 61347-2-11 |
Lamp controlgear Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires-IEC 61347-2-11: 2001 |
|
CENELEC EN 61347-2-2 |
Lamp controlgear Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps-Amendment A2: June 2006; Amendment A1: March 2006; Supersedes EN 61046:1994 + A1:1996; IEC 61347-2-2:2000; Incorporating Corrigendum July 2003 |
|
CENELEC EN 61429 |
Marking of Secondary Cells and Batteries with the International Recycling Symbol ISO 7000-1135 and Indications Regarding Directives 93/86/EEC and 91/157/EEC-Includes Amendment A11: 1998 |
|
CENELEC EN 61666 |
Industrial Systems, Installations and Equipment and Industrial Products Identification of Terminals within a System-IEC 61666: 1997 |
|
CENELEC EN 62271-200 |
High-voltage switchgear and controlgear Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV-IEC 62271-200:2003; Supersedes EN 60298:1996 + A11:1999 |
|
CENELEC EN 62310-2 |
Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements |
|
CENELEC HD 21.10 S1 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 10: Extensible Leads |
|
CENELEC HD 21.9 S2 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 9: Single Core Non-Sheathed Cable for Installation at Low Temperatures |
|
CENELEC HD 22.6 S2 |
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 6: Arc Welding Cables |
|
CENELEC HD 22.9 S2 |
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 9: Single Core Non-Sheathed Cables for Fixed Wiring Having Low Emission of Smoke and Corrosive Gases |
|
CENELEC HD 380 S2 |
Test Methods for Evaluating Resistance to Tracking and Erosion of Electrical Insulating Materials Used Under Severe Ambient Conditions |
|
CENELEC HD 629.1 S2 |
Test Requirements on Accessories foe Use on Power Cables of Rated Voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV Part 1: Cables with Extruded Insulation |
|
CENELEC HD 629.2 S2 |
Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV Part 2: Cables with impregnated paper insulation |
|
CENELEC CLC/TR 50426 |
Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation – Guide |
|
CENELEC CLC/TS 61496-3 |
Safety of machinery Electro-sensitive protective equipment Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)-IEC 61496-3:2001; |
|
CEN EN 10282 |
Magnetic Materials - Method of Test for the Determination of Surface Insulation Resistance of Electrical Sheet and Strip |
|
CEN EN 10330 |
Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open circuit |
|
CEN EN 10331 |
Magnetic materials - Specification for sintered soft magnetic materials |
|
CEN EN 12510 |
Wood poles for overhead lines - Strength grading criteria-Incorporating corrigendum July 2002 |
|
CENELEC EN 169000 |
Generic Specification: Quartz Crystal Controlled Oscillators-Includes Amendment A1: 1998; Supersedes CECC 69000 Issue 1: 1991 |
|
CENELEC EN 50010 |
Low Voltage Switchgear and Controlgear for Industrial Use. Inductive Proximity Switches. Methods for Measuring the Operating Distance and Operating Frequency |
|
CENELEC EN 50044 |
Low Voltage Switchgear and Controlgear for Industrial Use: Inductive Proximity Switches: Identification of Connections-BS 6519 |
|
CENELEC EN 50085-2-1 |
Cable trunking systems and cable ducting systems for electrical installations Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings |
|
CENELEC EN 50123-5 |
Railway Applications - Fixed Installations - D.C. Switchgear Part 5: Surge Arresters and Low-Voltage Limiters for Specific Use in d.c. Systems |
|
CENELEC EN 50180 |
Bushings Above 1 kV up to 36 kV and from 250 A to 3,15 kA for Liquid Filled Transformers-Includes Corrigendum April 1998; Supersedes HD 506 S1:1989 and Its Amendment |
|
CENELEC EN 50216-2 |
Power transformer and reactor fittings Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with conservator-Includes amendment A1: 2002 |
|
CENELEC EN 50216-4 |
Power Transformer and Reactor Fittings Part 4: Basic Accessories (Earthing Terminal, Drain and Filling Devices, Thermometer Pocket, Wheel Assembly) |
|
CENELEC EN 50290-2-24 |
Communication Cables Part 2-24: Common Design Rules and Construction - PE Sheathing-Supersedes HD 624.4 S1: 1996 |
|
CENELEC EN 50290-2-25 |
Communication Cables - Part 2-25: Common Design Rules and Construction - Polypropylene Insulation Compounds-Supersedes HD 624.5 S1:1995 |
|
CENELEC EN 50290-2-29 |
Communication Cables Part 2-29: Common Design Rules and Construction - Cross-Linked PE Insulation Compounds-Supersedes HD 624.9 S1:1997 |
|
CENELEC EN 50299 |
Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV-Incorporating Corrigendum April 2004 |
|
CENELEC EN 50342-2 |
Lead-acid starter batteries - Part 2: Dimensions of batteries and marking of terminals |
|
CEN EN 50363-10-2 |
Insulating, sheathing and covering materials for low voltage energy cables Part 10-2: Miscellaneous sheathing compounds – Thermoplastic polyurethane |
|
CENELEC EN 50363-2-1 |
Insulating, sheathing and covering materials for low voltage energy cables Part 2-1: Cross-linked elastomeric sheathing compounds |
|
CENELEC EN 50363-3 |
Insulating, sheathing and covering materials for low voltage energy cables Part 3: PVC insulating compounds |
|
CENELEC EN 50363-8 |
Insulating, sheathing and covering materials for low voltage energy cables Part 8: Halogen-free, thermoplastic sheathing compounds |
|
CENELEC EN 50375 |
Testing methodology for wipers used in electrical insulating oil |
|
CEN EN 50381 |
Transportable ventilated rooms with or without an internal source of release-Incorporates Corrigendum December 2005 |
|
CENELEC EN 50405 |
Railway applications Current collection systems Pantographs, testing methods for carbon contact strips |
|
CENELEC EN 50414 |
Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining |
|
CENELEC EN 50464-1 |
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements |
|
CENELEC EN 50464-2-3 |
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-3: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 2 for use on distribution transformers meeting the requirements of EN 50464-2-1 |
|
CENELEC EN 60044-7 |
Instrument Transformers - Part 7: Electronic Voltage Transformers-IEC 60044-7:1999 |
|
CENELEC EN 60127-10 |
Miniature Fuses - Part 10: User Guide for Miniature Fuses-IEC 60127-10:2001 |
|
CENELEC EN 60188 |
High-Pressure Mercury Vapour Lamps - Performance Specifications |
|
CENELEC EN 60255-22-7 |
Electrical relays Part 22-7: Electrical disturbance tests for measuring relays and protection equipment - Power frequency immunity tests-IEC 60255-22-7:2003 |
|
CENELEC EN 60255-25 |
Electrical Relays Part 25: Electromagnetic Emission Tests for Measuring Relays and Protection Equipment-IEC 60255-25: 2000 |
|
CENELEC EN 60255-5 |
Electrical Relays Part 5: Insulation Coordination for Measuring Relays and Protection Equipment - Requirements and Tests-IEC 60255-5:2000 |
|
CENELEC EN 60269-3 |
Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)-Includes Amendment A1:2003; IEC 60269-3:1987 + A1:2003 |
|
CENELEC EN 60317-0-6 |
Specifications for particular types of winding wires Part 0-6: General requirements ? Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire-Incorporates Amendment A1: 2006 |
|
CENELEC EN 60320-2-1 |
Appliance Couplers for Household and Similar General Purposes Part 2-1: Sewing Machine Couplers-IEC 60320-2-1:2000 |
|
CENELEC EN 60400 |
Lampholders for tubular fluorescent lamps and starterholders-Includes amendment A1:2002 and A2:2004; IEC 60400:1999 + A1:2000 + A2:2004, modified; |
|
CENELEC EN 60404-6 |
Magnetic materials Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens-IEC 60404-6:2003 |
|
CENELEC EN 60420 |
High-Voltage Alternating Current Switch-Fuse Combinations (IEC 420 : 1990)-superseded by EN 62271-105:2003 |
|
CENELEC EN 60450 |
Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials-Incorporates Amendment A1: 2007 |
|
CENELEC EN 60454-3-18 |
Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 18: Polypropylene film tapes with pressure-sensitive adhesive-IEC 60454-3-18:2003 |
|
CENELEC EN 60454-3-8 |
Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre-Incorporates corrigendum December 2006 |
|
CENELEC EN 60544-4 |
Electrical insulating materials - Determination of the effects of ionizing radiation Part 4: Classification system for service in radiation environments-IEC 60544-4:2003 |
|
CENELEC EN 60622 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells-IEC 60622:2002 |
|
CENELEC EN 60641-1 |
Specification for Pressboard and Presspaper for Electrical Purposes Part 1: Definitions and General Requirements (IEC 641-1 : 1979 + A1 : 1993) |
|
CENELEC EN 60641-2 |
Pressboard and presspaper for electrical purposes Part 2: Methods of tests-IEC 60641-2:2004 |
|
CENELEC EN 60669-2-2 |
Switches for household and similar fixed electrical installations Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)-IEC 60669-2-2:2006 |
|
CENELEC EN 60670-21 |
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means |
|
CENELEC EN 60674-2 |
Specification for Plastic Films for Electrical Purposes - Part 2: Methods of Test-Includes Amendment A1: 2001; IEC 60674-2: 1988 + Corrigendum 1995 + A1: 2001 |
|
CENELEC EN 60684-3-420 TO 422 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 420 to 422: Polyethylene Terephthalate Textile Sleeeving with Acrylic Based Coating-IEC 60684-3-420 to 422: 2002; Supersedes HD 523.3.420 to 422 S1: 1993 |
|
CENELEC EN 60702-1 |
Mineral Insulated Cables and Their Terminations with a Rated Voltage Not Exceeding 750 V Part 1: Cables-IEC 60702-1:2002 |
|
CEN EN 60740-1 |
Laminations for transformers and inductors Part 1: Mechanical and electrical characteristics-IEC 60740-1: 2005 |
|
CENELEC EN 60885-2 |
Electrical test methods for electric cables Part 2: Partial discharge tests-IEC 60885-2: 1987 |
|
CENELEC EN 60893-3-3 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-3: Specifications for individual materials Requirements for rigid laminated sheets based on melamine resins |
|
CENELEC EN 60903 |
Live working - Gloves of insulating material-Incorporating Corrigendum January 2005; IEC 60903:2002 + Corrigendum 2003, modified; Supersedes EN 60903:1992 and EN 50237:1997 |
|
CENELEC EN 60909-3 |
Short-circuit currents in three-phase a.c systems — Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth |
|
CENELEC EN 60922 |
Auxiliaries for Lamps - Ballasts for Discharge Lamps (Excluding Tubular Fluorescent Lamps) General and Safety Requirements-IEC 60922: 1997; Superseded by EN 61347-2-9:2001 |
|
CENELEC EN 60923 |
Auxiliaries for lamps – Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements-Incorporating Amendment A1: 08/2006 |
|
CENELEC EN 60947-5-9 |
Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches |
|
CENELEC EN 61007 |
Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Measuring Methods and Test Procedures-IEC 1007: 1994, Modified |
|
CENELEC EN 61050 |
Transformers for Tubular Discharge Lamps Having a No-Load Output Voltage Exceeding 1000 V (Generally Called Neon- Transformers) General and Safety Requirements-IEC 1050: 1991 + Corrigendum March 1992, Modified; Includes Amendment A1: 1995; Supersedes HD 388 S2: 1983 |