|
CENELEC EN 61099 |
Specification for Unused Synthetic Organic Esters for Electrical Purposes; (IEC 1099 : 1992) |
|
CENELEC EN 61150 |
Alkaline Secondary Cells and Batteries Sealed Nickel-Cadmium Rechargeable Monobloc Batteries in Button Cell Design (IEC 1150 : 1992 + Corrigendum 1992) |
|
CENELEC EN 61169-8 |
Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC) |
|
CENELEC EN 61181 |
Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment |
|
CENELEC EN 61198 |
Mineral Insulating Oils - Methods for the Determination of 2-Furfural and Related Compounds (IEC 1198 : 1993) |
|
CENELEC EN 61203 |
Synthetic Organic Esters for Electrical Purposes Guide for Maintenance of Transformer Esters in Equipment (IEC 1203:1992) |
|
CENELEC EN 61212-1 |
Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Part 1: Definitions, designations and general requirements-IEC 61212-1:2006 |
|
CENELEC EN 61212-2 |
Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Part 2: Methods of test |
|
CENELEC EN 61241-0 |
Electrical apparatus for use in the presence of combustible dust Part 0: General requirements |
|
CENELEC EN 61248-3 |
Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 3: Sectional Specification for Power Transformers on the Basis of the Capability Approval Procedure-IEC 61248-3: 1996 |
|
CENELEC EN 61286 |
Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange-IEC 61286: 2001, modified |
|
CENELEC EN 61395 |
Overhead Electrical Conductors Creep Test Procedures for Stranded Conductors-IEC 61395:1998 |
|
CENELEC EN 61733-1 |
Measuring Relays and Protection Equipment Protection Communication Interfacing Part 1: General (IEC 1733-1 : 1995) |
|
CENELEC EN 61788-11 |
Superconductivity Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors-IEC 61788-11:2003 |
|
CENELEC EN 61810-7 |
Electromechanical elementary relays Part 7: Test and measurement procedures-IEC 61810-7:2006 |
|
CENELEC EN 61811-50 |
Electromechanical All-or-Nothing Relays Part 50: Sectional Specification Electromechanical All-or-Nothing Telecom Relays of Assessed Quality-Supersedes EN 116500: 1992; IEC 61811-50: 2002 |
|
CENELEC EN 61811-55 |
Electromechanical All-or-Nothing Relays Part 55: Blank Detail Specification - Electromechanical All-or-Nothing Telecom Relays of Assessed Quality - Two Change-Over Contacts, 11 mm x 7,5 mm (Max.) Base |
|
CENELEC EN 61854 |
Overhead Lines - Requirements and Tests for Spacers-IEC 61854:1998 |
|
CENELEC EN 61857-21 |
Electrical insulation systems Procedures for thermal evaluation Part 21: Specific requirements for general-purpose models Wire-wound applications-IEC 61857-21:2004 Supersedes EN 61857-23:2002 |
|
CENELEC EN 61897 |
Overhead Lines - Requirements and Tests for Stockbridge Type Aeolian Vibration Dampers-IEC 61897:1998 |
|
CENELEC EN 61982-2 |
Secondary batteries for the propulsion of electric road vehicles Part 2: Dynamic discharge performance test and dynamic endurance test-IEC 61982-2:2002 |
|
CENELEC EN 62021-1 |
Insulating liquids Determination of acidity Part 1: Automatic potentiometric titration-IEC 62021-1:2003 |
|
CENELEC EN 62025-2 |
High frequency inductive components Non-electrical characteristics and measuring methods Part 2: Test methods for non-electrical characteristics-IEC 62025-2: 2005 |
|
CENELEC EN 62053-31 |
Electricity Metering Equipment (a.c.) Partricular Requirements Part 31: Pulse Output Devices for Electromechanical and Electronic Meters (Two Wires Only)-IEC 62053-31:1998 |
|
CENELEC EN 62219 |
Overhead electrical conductors Formed wire, concentric lay, stranded conductors-IEC 62219:2002 |
|
CENELEC EN 62246-1 |
Reed Contacts Unit Part 1: Generic Specification-IEC 62246-1:2002; Supersedes EN 119000:1996 |
|
CENELEC EN 62271-101 |
High-voltage switchgear and controlgear Part 101: Synthetic testing-IEC 62271-101:2006;:2000 |
|
CENELEC EN 62271-102 |
High-voltage switchgear and controlgear Part 102: High-voltage alternating current disconnectors and earthing switches-IEC 62271-102:2001 + Corrigendum 2002; Supersedes EN 60129:1994 + A1:1994 + A2:1996; EN 61129:1994 + A1:1995 and EN 61259:1994 |
|
CENELEC EN 62271-105 |
High-voltage switchgear and controlgear Part 105: Alternating current switch-fuse combinations-IEC 62271-105:2002; Supersedes EN 60420:1993 |
|
CENELEC ENV 50275-1 |
Conductive Charging for Electric Vehicles Part 1: General Considerations-Ratified European Text |
|
CENELEC HD 109 S3 |
Cartridge Fuse-Links for Miniature Fuses - First Supplement: Colour Coding |
|
CENELEC HD 109.5 S1 |
Miniature Fuses Part 5: Guidelines for Quality Assessment of Miniature Fuse-Links |
|
CENELEC HD 187 S3 |
A.C. Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1kV and up to and Including 72.5kV |
|
CENELEC HD 199.1 S2 |
Tungsten Filament Lamps for General Service |
|
CENELEC HD 201/1 S1 |
Alkaline Secondary Cells and Batteries Sealed Nickel-Cadmium Cylindrical Rechargeable Single Cells for Permanent Charge at Elevated Temperatures |
|
CENELEC HD 21.7 S1/ A1 |
AMD 1 Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 7: Single Core Non-Sheathed Cables for Internal Wiring for a Conductor Temperature of 90 Degrees Celsius |
|
CENELEC HD 211.1 S5 |
Primary Batteries - Part 1: General |
|
CENELEC HD 219 S3 |
Law Pressure Sodium Vapour Lamps |
|
CENELEC HD 22.11 S1/A1 |
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 11: EVA Cords and Flexible Cables |
|
CENELEC HD 22.3 S3/A1 |
Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 3: Heat Resistant Silicone Rubber Insulated Cables |
|
CENELEC HD 22.7 S2/A1 |
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 7: Cables with Increased Heat Resistance for Internal Wiring for a Conductor Temperature of 110 Degrees C |
|
CENELEC HD 250 |
General Specification for Electric Motor Operated Appliances for Household and Similar Purposes |
|
CENELEC HD 307.1 S2 |
Specification for Solventless Polymerizable Resinous Compounds Used for Electrical Insulation - Part 1: Definitions and General Requirements. Basis for Classification of Polymerisable Resinous Compounds |
|
CENELEC HD 307.3.4 S1 |
Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 3: Specifications for Individual Materials Sheet 4: Filled Polyurethane Compounds-Superseded by EN 60455-3-4:2003 |
|
CENELEC HD 329 |
Test on Hollow Insulators for Use in Electrical Equipment |
|
CENELEC HD 348 S6 |
High-Voltage Alternating-Current Circuit-Breakers (IEC 56:1987 + A1:1992 + A2:1995, Modified) |
|
CENELEC HD 352.3.3 S1 |
Specification for Insulating Materials Based on Mica-Part 3: Specifications for Individual Materials. Sheet Three: Specifications for Rigid Mica Materials for Heating Equipment |
|
CENELEC HD 355.1 S2 |
High-Voltage Switches Part 1: High-Voltage Switches for Rated Voltages Above 1kv and Less Than 52 kv |
|
CENELEC HD 358 S3 |
Gas-Insulated Metal- Enclosed Switchgear for Rated Voltages of 72.5 kV and Above-Superseded by EN 60517:1996 |
|
CENELEC HD 382 |
Determination of the Aromatic Hydrocarbon Content of New Mineral Insulating Oils |
|
CENELEC HD 388 S2 |
Transformers for Tubular Discharge Lamps Having No-Load Output Voltage Exceeding 1000V (Generally Called Neon Transformers) |
|
CENELEC HD 398.1/A1 |
AMD 1 Power Transformers Part 1: General |
|
CENELEC HD 398.5 |
Power Transformers Part 5: Ability to Withstand Short-Circuit |
|
CENELEC HD 398.5/A1 |
AMD 1 Power Transformers Part 5: Ability to Withstand Short-Circuit-Superseded by EN 60076-5:2000 |
|
CENELEC HD 408 |
Alternating Current Disconnectors (Isolators) and Earthing Switches |
|
CENELEC HD 408 S2 |
Alternating Current Disconnectors and Earthing Switches |
|
CENELEC HD 410.1 |
Specification for Pressboard and Presspaper for Electric Purposes Part 1: Definitions and General Requirements |
|
CENELEC HD 410.2 |
Specification for Press Board and Press Paper for Electric Purposes Part 2: Method of Test |
|
CENELEC HD 420 |
Control Switches (Low Voltage-Devices for Control and Auxiliary Circuits, Including Contactor Relays) |
|
CENELEC HD 421 |
Low-Voltage Motor Starters |
|
CENELEC HD 444.2.2 S2 |
Fire Hazard Testing Part 2: Test Methods Section 2 - Needle- Flame Test (IEC 695-2-2:1991) (CENELEC EN 60695-2-2: 1994) |
|
CENELEC HD 444.2.3 |
Fire Hazard Testing Part 2: Test Methods Bad- Connection Test with Heaters |
|
CENELEC HD 479 |
Oscilloscopes and Peak Voltmeters for Impulse Tests |
|
CENELEC HD 487 S1 |
Determination of Water in Insulating Liquids by Automatic Coulometric Karl Fischer Titration |
|
CENELEC HD 506 S1/A1 |
AMD 1 Bushings for Liquid Transformers Above 1kv up to 33kv |
|
CENELEC HD 516 S1/A4 |
AMD 4 Guide to Use of Low Voltage Harmonized Cables |
|
CENELEC HD 523.3.209 S1 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving |
|
CENELEC HD 523.3.240 TO 243 S1 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 240 to 243: Heat-Shrinkable PTFE Sleeving |
|
CENELEC HD 523.3.420 TO 422 S1 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 420 to 422: Polyethylene Terephthalate Textile with Acrylic Based Coating |
|
CENELEC HD 53.1 S2/ A1 |
AMD 1 Rotating Electrical Machines - Part 1: Rating and Performance |
|
CENELEC HD 53.1 S2/ A3 |
AMD 3 Rotating Electrical Machines - Part 1: Rating and Performance |
|
CENELEC HD 53.14 S1 |
Rotating Electrical Machines Part 14: Mechanical Vibration of Certain Machines with Shaft Heights 56 mm and Higher - Measurement, Evaluation and Limits of the Vibration Severity |
|
CENELEC HD 53.15 S1 |
Rotating Electrical Machines Part 15: Impulse Voltage Withstand Levels of Rotating A.C. Machines with Form-Wound Stator Coils |
|
CENELEC HD 53.2 S1 |
Rotating Electrical Machines Part 2: Methods for Determining Losses and Efficiency of Rotating Electrical Machinery from Tests (Excluding Machines for Traction Vehicles) First Supplement: Measurement of Losses by the Calorimetric Method-Superseded by EN 60034-2: November 1996 |
|
CENELEC HD 53.3 S1 |
Rotating Electrical Machines Part 3: Specific Requirements for Turbine-Type Synchronous Machines |
|
CENELEC HD 53.6 |
Rotating Electrical Machines Part 6: Methods of Cooling Rotating Machinery |
|
CENELEC HD 532 S1 |
Hard-Drawn Aluminium Wire for Overhead Live Conductors-Superseded by EN 60889: 1997 |
|
CENELEC HD 540.3 S1 |
Insulation Co-Ordination Part 3: Phase-to-Phase Insulation Co-Ordination Principles, Rules and Application Guide-Partly Superseded by EN 60 071-2: 1997 |
|
CENELEC HD 553 S1 |
Current Transformers |
|
CENELEC HD 554 S1 |
Voltage Transformers-Superseded by EN 60044-5:2004 |
|
CENELEC HD 555.1 S2 |
Specifications for Particular Types of Winding Wires Part 1: Polyvinyl Acetal Enamelled Round Copper Wire, Class 105 |
|
CENELEC HD 555.13 S2 |
Specifications for Particular Types of Winding Wires Part 13: Polyester or Polyesterimide Overcoated with Polyamide-Imide Enamelled Round Copper Wire, Class 200 |
|
CENELEC HD 555.14 S1 |
Specifications for Particular Types of Winding Wires Part 14: Polyvinyl Acetal Enamelled Round Aluminium Winding Wire, Class 105 |
|
CENELEC HD 555.17 S1 |
Specifications for Particular Types of Winding Wires Part 17: Polyvinyl Acetal Enamelled Rectangular Copper Winding Wire, Class 105 |
|
CENELEC HD 555.2 S2 |
Specifications for Particular Types of Winding Wires Part 2: Solderable Polyurethane Enamelled Round Copper Wire, Class 130, with a Bonding Layer |
|
CENELEC HD 555.22 S2 |
Specifications for Particular Types of Winding Wires Part 22: Polyester or Polyesterimide Enamelled Round Copper Wire Overcoated with Polyamide, Class 180 |
|
CENELEC HD 555.24 S2 |
Specifications for Particular Types of Winding Wires Part 24: Polyester or Polyesterimide Enamelled Round Aluminium Wire Overcoated with Polyamide, Class 180 |
|
CENELEC HD 555.25 S2 |
Specifications for Particular Types of Winding Wires Part 25: Polyester or Polyesterimide Overcoated with Polyamide-Imide Enamelled Round Aluminium Wire, Class 200-Superseded by EN 60 317-25:1996 |
|
CENELEC HD 555.26 S2 |
Specifications for Particular Types of Winding Wires Part 26: Polyamide-Imide Enamelled Round Copper Wire, Class 200 |
|
CENELEC HD 555.29 S1 |
Specifications for Particular Types of Winding Wires Part 29: Polyester or Polyesterimide Overcoated with Polyamide-Imide Enamelled Rectangular Copper Wire, Class 200-Superseded by EN 60317-29: 1996 |
|
CENELEC HD 555.31 S1 |
Specifications for Particular Types of Winding Wires Part 31: Glass-Fibre Wound, Polyester or Polyesterimide Varnish-Treated, Bare or Enamelled Rectangular Copper Wire, Temperature Index 180-Superseded by EN 60 317-31:1996 |
|
CENELEC HD 555.7 S2 |
Specifications for Particular Types of Winding Wires Part 7: Polyimide Enamelled Round Copper Wire, Class 220 |
|
CENELEC HD 566 S1 |
Thermal Evaluation and Classification of Electrical Insulation-Superseded by EN 60085:2004 |
|
CENELEC HD 578 S1 |
Characteristics of Indoor and Outdoor Post Insulators for Systems with Nominal Voltages Greater Than 1000 V |
|
CENELEC HD 585 S1 |
Electrolyte for Vented Nickel-Cadmium Cells |
|
CENELEC HD 594 S1 |
Self-Ballasted Lamps for General Lighting Services - Performance Requirements |
|
CENELEC HD 612 S1 |
Standard Cells; (IEC 428:1973) |
|
CENELEC HD 91 |
Rules for Ohmic Resistors Used in the Power Circuits of Electrically Powered Vehicles |
|
CENELEC HD 92 |
Mains Operated Electric Fence Controllers |
|
CENELEC CLC/TS 50349 |
Qualification of electrical installation contractors-Supersedes ES 59004:1998 |
|
CEN EN 10265 |
Magnetic Materials - Specification for Steel Sheet and Strip with Specified Mechanical Properties and Magnetic Permeability |
|
CENELEC EN 116205 THRU 116207 |
Blank Details Specification: Hermetically Sealed Relays for Severe Static Environmental Conditions (116205) for Severe Mobile Environmental Conditions (116206) for Severe Airborne Environmental Conditions (116207) |
|
CEN EN 12843 |
Precast concrete products - Masts and poles |
|
CEN EN 1710 |
Equipment and components intended for use in potentially explosive atmospheres in underground mines |
|
CENELEC EN 50006 |
The Limitation of Disturbances in Electricity Supply Networks Caused by Domestic and Similar Appliances Equipped with Electronic Devices |
|
CENELEC EN 50024 |
Low Voltage Switchgear and Controlgear for Industrial Use: Mounting Rails; C- Profile and Accessories for the Mounting of Equipment |
|
CENELEC EN 50085-2-3 |
Cable Trunking Systems and Cable Ducting Systems for Electrical Installations - Part 2-3: Particular Requirements for Slotted Cable Trucking Systems Intended for Installation in Cabinets |
|
CENELEC EN 50089 |
Cast Resin Partitions for Metal Enclosed Gas-Filled High Voltage Switchgear and Controlgear |
|
CENELEC EN 50122-2 |
Railway Applications - Fixed Installations - Part 2: Protective Provisions Against the Effects of Stray Currents Caused by d.c. Traction Systems-Includes Amendment A1: 2002; Incorporating Corrigendum August 2001 |
|
CENELEC EN 50216-5 |
Power transformer and reactor fittings Part 5: Liquid level, pressure and flow indicators, pressure relief devices and dehydrating breathers-Incorporates Amendments A1:2002, A2:2005 and A3: 2006 |
|
CENELEC EN 50216-7 |
Power Transformer and Reactor Fittings Part 7: Electric Pumps for Transformer Oil |
|
CENELEC EN 50243 |
Outdoor Bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for Liquid Filled Transformers |
|
CENELEC EN 50250 |
Conversion adaptors for industrial use-Incorporates Corrigendum August 2007 |
|
CENELEC EN 50266-1 |
Common Test Methods for Cables under Fire Conditions - Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables - Part 1: Apparatus-Supersedes HD 405.3 S1:1993 |
|
CENELEC EN 50266-2-2 |
Common Test Methods for Cables under Fire Conditions - Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables Part 2-2: Procedures - Category A-Supersedes HD 405.3 S1: 1993; Incorporating Corrigendum March 2002 |
|
CENELEC EN 50274 |
Low-Voltage Switchgear and Controlgear Assemblies - Protection Against Electric Shock - Protection Against Unintentional Direct Contact with Hazardous Live Parts |
|
CENELEC EN 50290-2-23 |
Communication Cables - Part 2-23: Common Design Rules and Construction - PE Insulation-:1994 |
|
CENELEC EN 50290-2-27 |
Communication cables - Part 2-27: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds-Incorporating Amendment A1: June 2007 |
|
CENELEC EN 50305 |
Railway Applications - Railway Rolling Stock Cables Having Special Fire Performance - Test Methods |
|
CENELEC EN 50326 |
Conductors for overhead lines - Characteristics of greases |
|
CENELEC EN 50355 |
Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall - Guide to use |
|
CENELEC EN 50362 |
Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
|
CENELEC EN 50363-1 |
Insulating, sheathing and covering materials for low voltage energy cables Part 1: Cross-linked elastomeric insulating compounds |
|
CEN EN 50363-7 |
Insulating, sheathing and covering materials for low voltage energy cables Part 7: Halogen-free, thermoplastic insulating compounds |
|
CENELEC EN 50464-2-1 |
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-1: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - General requirements |
|
CENELEC EN 50497 |
Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables |
|
CENELEC EN 60044-6 |
Instrument Transformers Part 6: Requirements for Protective Current Transformers for Transient Performance-IEC 60044-6: 1992, Modified |
|
CENELEC EN 60192 |
Low Pressure Sodium Vapour Lamps - Performance Specifications-IEC 60192:2001 |
|
CENELEC EN 60247 |
Insulating liquids Measurement of relative permittivity, dielectric dissipation factor (tan $) and d.c. resistivity-IEC 60247:2004 |
|
CENELEC EN 60255-26 |
Electrical relays Part 26 : Electromagnetic compatibility requirements for measuring relays and protection equipment-IEC 60255-26:2004 |
|
CENELEC EN 60265-1 |
High-Voltage Switches Part 1: Switches for Rated Voltages Above 1 kV and Less Than 52 kV-IEC 60265-1:1998; Supersedes HD 355.1 S3:1995 |
|
CENELEC EN 60269-1 |
Low-Voltage Fuses - Part 1: General Requirements |
|
CENELEC EN 60317-0-5 |
Specifications for particular types of winding wires Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire |
|
CENELEC EN 60317-2 |
Specifications for Particular Types of Winding Wires - Part 2: Solderable Polyurethane Enamelled Round Copper Wire, Class 130, with a Bonding Layer-Includes Amendments A1: 1998 and A2: 2000; IEC 60317-2:1990 & A1:1997 & A2: 1999; Supersedes HD 555.2 S2: 1992 |
|
CENELEC EN 60317-28 |
Specifications for particular types of winding wires Part 28: Polyesterimide enamelled rectangular copper wire, class 180 (IEC 60317-28:-Incorporating Amendments A1: 1/1998, and A2: 7/2007 |
|
CENELEC EN 60317-49 |
Specifications for Particular Types of Windind Wires - Part 49: Glass-Fibre Wound Resin or Varnish Impregnated, Bare or Enamelled Round Copper Wire, Temperature Index 180-IEC 60317-49:1999 |
|
CENELEC EN 60371-3-7 |
Insulating materials based on mica Part 3: Specifications for individual materials Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping-Incorporates Amendment 1: 11/2006 |
|
CENELEC EN 60376 |
Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment-IEC 60376: 2005 |
|
CENELEC EN 60454-3-3 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 3: Polyester Film Tapes with Rubber Thermoplastic Adhesive-IEC 60454-3-3:1998 |
|
CENELEC EN 60455-3-5 |
Resin Based Reactive Compounds Used for Electrical Insulation Part 3: Specifications for Individual Materials Sheet 5: Unsaturated Polyester Based Impregnating Resins |
|
CENELEC EN 60464-3-1 |
Varnishes Used for Electrical Insulation Part 3: Specifications for Individual Materials Sheet 1: Ambient Curing Finishing Varnishes-Includes amendment A1:2006; IEC 60464-3-1:2001 + A1:2006 |
|
CENELEC EN 60465 |
Specification for Unused Insulating Mineral Oils For Cables with Oil Ducts |
|
CENELEC EN 60544-5 |
Electrical insulating materials Determination of the effects of ionizing radiation Part 5: Procedures for assessment of ageing in service-IEC 60544-5:2003 |
|
CENELEC EN 60623 |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Vented Nickel-Cadmium Prismatic Rechargeable Single Cells-IEC 60623: 2001 |
|
CENELEC EN 60644 |
Specification for High- Voltage Fuse-Links for Motor Circuit Applications; (IEC 644:1979) |
|
CENELEC EN 60669-2-4 |
Switches for household and similar fixed electrical installations Part 2-4: Particular requirements - Isolating switches-IEC 60669-2-4:2004, modified |
|
CENELEC EN 60670-22 |
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 22: Particular requirements for connecting boxes and enclosures |
|
CENELEC EN 60674-3-4 TO 6 |
Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheets 4 to 6: Requirements for Polyimide Films Used for Electrical Insulation (IEC 674-3-4 to 6 : 1993) |
|
CENELEC EN 60684-2 |
Flexible insulating sleeving Part 2: Methods of test-Includes amendments A1:2003 and A2:2005; IEC 60684-2:1997/A1:2003; Supersedes HD 523.2 S2:1993 |
|
CENELEC EN 60684-3-248 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 |
|
CENELEC EN 60684-3-320 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated-IEC 60684-3-320: 2002; Supersedes HD 523.3.320 S1: 1989 |
|
CENELEC EN 60684-3-409 |
Flexible Insulating Sleeving Part 3: Specifications for Individual Types of Sleeving Sheet 409: Glass Textile Sleeving with Polyurethane (PUR)-Based Coating-IEC 60684-3-409:1999 |
|
CENELEC EN 60811-1-3 |
Insulating and Sheathing Materials of Electric Cables - Common Test Methods - Part 1-3: General Application - Methods for Determining the Density - Water Absorption Tests - Shrinkage Test-Includes Amendment A1: 2001; IEC 60811-1-3: 1993 + A1: 2001; Supersedes HD 505.1-2 S2: 1991 |
|
CENELEC EN 60811-4-1 |
Insulating and sheathing materials of electric and optical cables Common test methods Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by termogravimetric-IEC 60811-4-1:2004 |
|
CENELEC EN 60811-5-1 |
Insulating and sheathing materials of electric and optical fibre cables Common test methods Part 5-1: Methods specific to filling compounds Drop point Separation of oil Lower temperature brittleness Total acid number Absence of corrosive components Permittivity at 23 °C D.C resistivity at 23 °C and 100 °C-Includes Amendment A1:2004; IEC 60811-5-1:1990 modified + A1:2004 |
|
CENELEC EN 60819-3-3 |
Non-cellulosic papers for electrical purposes Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers-IEC 60819-3-3:2006 |
|
CENELEC EN 60838-2-2 |
Miscellaneous lampholders Part 2-2: Particular requirements - Connectors for LED-modules-IEC 60838-2-2:2006 |
|
CENELEC EN 60893-2 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 2: Methods of test-IEC 60893-2:2003 |
|
CENELEC EN 60893-3-1 |
Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 1: Types of Industrial Rigid Laminated Sheets |
|
CENELEC EN 60893-3-2 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-2: Specifications for individual materials Requirements for rigid laminated sheets based on epoxy resins-IEC 60893-3-2:2003 |
|
CENELEC EN 60893-3-4 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-4: Specifications for individual materials Requirements for rigid laminated sheets based on phenolic resins-IEC 60893-3-4:2003 |
|
CENELEC EN 60893-3-5 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-5: Specifications for individual materials Requirements for rigid laminated sheets based on polyester resins-IEC 60893-3-5:2003 |
|
CENELEC EN 60896-22 |
Stationary lead-acid batteries Part 22: Valve regulated types Requirements-IEC 60896-22:2004 |
|
CENELEC EN 60928 |
Auxiliaries for Lamps - A.C. Supplied Electronic Ballasts for Tubular Fluorescent Lamps - General and Safety Requirements-Includes Amendment A1:1999; IEC 60928:1995 + A1:1999; Superseded by EN 61347-2-3: 2001 |
|
CENELEC EN 60938-2 |
Fixed Inductors for Electromagnetic Interference Suppression Part 2: Sectional Specification-Incorporates Amendment 1: February 2007 |
|
CENELEC EN 61033 |
Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate |
|
CENELEC EN 61068-2 |
Specification for Polyester Fibre Woven Tapes Part 2: Methods of Test-IEC 61068-2: 1991 |
|
CENELEC EN 61166 |
High-Voltage Alternating Current Circuit-Breakers Guide for Seismic Qualification of High- Voltage Alternating Current Circuit- Breakers (IEC 1166 : 1993) |
|
CENELEC EN 61211 |
Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V Impulse puncture testing in air-IEC 61211:2004 |
|
CENELEC EN 61212-3-2 |
Industrial Rigid Round Laminated Tubes and Rods Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Round Laminated Moulded Tubes-IEC 61212-3-2:2006 |
|
CENELEC EN 61248-2 |
Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 2: Sectional Specification for Signal Transformers on the Basis of the Capability Approval Procedure-IEC 61248-2: 1996 |
|
CENELEC EN 61264 |
Ceramic Pressurized Hollow Insulators for High-Voltage Switchgear and Controlgear-IEC 61264:1998; Incorporating Corrigendum July 2000; Supersedes EN 50062:1991; Superseded by EN 62155:2003 |
|
CENELEC EN 61386-1 |
Conduit systems for cable management Part 1: General requirements-Incorporates Corrigendum April 2004; IEC 61386-1:1996 + A1:2000 |
|
CENELEC EN 61479 |
Live working Flexible conductor covers (line hoses) of insulating material-Includes amendment A1: 2002; IEC 61479: 2001 + A1: 2002 |
|
CENELEC EN 61534-1 |
Powertrack systems Part 1: General requirements-IEC 61534-1:2003 |
|
CENELEC EN 61534-21 |
Powertrack systems Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting-IEC 61534-21:2006 |
|
CENELEC EN 61537 |
Cable management - Cable tray systems and cable ladder systems |
|
CENELEC EN 61605 |
Fixed inductors for use in electronic and telecommunication equipment – Marking codes-IEC 61605: 2005 |
|
CENELEC EN 61660-2 |
Short-Circuit Currents in D.C. Auxiliary Installations in Power Plants and Substations Part 2: Calculation of Effects-IEC 61660-2: 1997 |
|
CENELEC EN 61773 |
Overhead Lines Testing of Foundations for Structures-IEC 1773: 1996 |
|
CENELEC EN 61788-3 |
Superconductivity Part 3: Critical current measurement - DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors-IEC 61788-3: 2006 |
|
CEN EN 61788-9 |
Superconductivity Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors |
|
CENELEC EN 61800-5-2 |
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
|
CENELEC EN 61811-1 |
Electromechanical Non-Specified Time All-Or-Nothing Relays of Assessed Quality - Part 1: Generic Specification-IEC 61811-1: 1999; Supersedes EN 116000-1: 1996 |
|
CENELEC EN 61811-10 |
Electromechanical elementary relays of assessed quality Part 10: Sectional specification Relays for industrial application-IEC 61811-10:2002 |
|
CENELEC EN 61811-52 |
Electromechanical All-or-Nothing Relays Part 52: Blank Detail Specification Electromechanical All-or-Nothing Telecom Relays of Assessed Quality Two Change-Over Contacts, 20 mm x 10 mm Base-IEC 61811-52: 2002; Supersedes EN 116502: 1992 |
|
CENELEC EN 61858 |
Electrical insulation systems Thermal evaluation of modifications to an established wire-wound EIS-IEC 61858:2004 |
|
CENELEC EN 62155 |
Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V-Supersedes HD 329 S1:1977 and EN 61264:1998; IEC 62155:2003, modified |
|
CENELEC EN 62199 |
Bushings for d.c. application-IEC 62199:2004 |
|
CENELEC EN 62217 |
Polymeric insulators for indoor and outdoor use with a nominal voltage > 1 000 V - General definitions, test methods and acceptance criteria-Incorporating Corrigendum: 12/2006 |
|
CENELEC EN 62271-100 |
High-voltage switchgear and controlgear Part 100: High-voltage alternating-current circuit-breakers-Incorporates Amendment 1: 2002 and Amendment 2: 2006; Incorporating corrigendum November 2006 |
|
CENELEC EN 62271-202 |
High-voltage switchgear and controlgear - Part 202: High voltage/low voltage prefabricated substation |
|
CEN EN 62317-7 |
Ferrite cores – Dimensions Part 7: EER-cores-IEC 62317-7: 2005 |
|
CENELEC EN 62317-8 |
Ferrite cores - Dimensions Part 8: E-cores |
|
CEN EN 62317-9 |
Ferrite cores - Dimensions Part 9: Planar cores-Incorporates Amendment A1:March 2007 |
|
CENELEC EN 62333-2 |
Noise suppression sheet for digital devices and equipment Part 2: Measuring methods-IEC 62333-2:2006 |
|
CENELEC EN 62358 |
Ferrite cores Standard inductance factor (AL) and its tolerance-IEC 62358:2004 |
|
CENELEC HD 109.2 S1 |
Miniature Fuses Part 2: Cartridge Fuse-Links |
|
CENELEC HD 187 S4 |
A.C Metal-Enclosed Switchgear and Controlgear for Rated Voltages above 1KV and up to and Including 72.5 KV |
|
CENELEC HD 196 |
Plugs, Sockets - Outlets and Couplers for Industrial Purposes |
|
CENELEC HD 201 S2 |
Sealed Nickel-Cadmium Cylindrical Rechargeable Single Cells |
|
CENELEC HD 211.1 S6 |
Primary Batteries - Part 1: General-Superseded by EN 60 086-1: 1995 |
|
CENELEC HD 22.6 S2/A1 |
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 6: Arc Welding Cables |
|
CENELEC HD 24 |
No - Load Voltage of Arc - Welding Equipment |
|
CENELEC HD 302 |
Transistorized Ballast for Fluorescent Lamps |
|
CENELEC HD 307.3.11 S1 |
Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 3: Specification for Individual Materials Sheet 11: Epoxy Resin- Based Coating Powders |
|
CENELEC HD 307.3.5 S1 |
Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation Part 3: Specifications for Individual Materials Sheet 5: Unsaturated Polyester Impregnating Resins |
|
CENELEC HD 309.1 |
Class 2 Direct Connected Alternating-Current Watthour Meters Part I |
|
CENELEC HD 347 |
Mechanical Vibration of Certain Rotating Electrical Machinery with Shaft Heights Between 80 and 400 mm Measurement and Evaluation of the Vibration Severity |
|
CENELEC HD 352.2 |
Specification for Insulating Materials Based on Built-up Mica or Treated Mica Paper Part 2: Methods of Test |
|
CENELEC HD 352.3.1 S2 |
Specification for Insulating Materials Based on Mica-Part 3: Specifications for Individual Materials. Sheet One: Commutator Separators and Materials |
|
CENELEC HD 358 S2 |
Gas-Insulated Metal- Enclosed Switchgear for Rated Voltages of 72.5 kV and Above |
|
CENELEC HD 381 |
Methods of Test for the Determination of Ionic Impurities in Electrical Insulating Materials by Extraction with Liquids |
|
CENELEC HD 390 S2 |
Inductive Voltage Dividers |
|
CENELEC HD 398.1 |
Power Transformers Part 1: General |
|
CENELEC HD 398.2 |
Power Transformers Part 2: Temperature Rise-Superseded by EN 60076-2: 1997 |
|
CENELEC HD 398.3 |
Power Transformers Insulation Levels and Dielectric Tests-Superseded by EN 60076-3:2001 |
|
CENELEC HD 398.3 SI PRAA |
AMD prAA Power Transformers - Part 3: Insulation Levels and Dielectric Tests |
|
CENELEC HD 398.4 |
Power Transformers Part 4: Tappings and Connections |
|
CENELEC HD 42.1 S3 |
Basic Dimensions of Winding Wires - Part 1: Diameters of Conductors for Round Winding Wires |
|
CENELEC HD 42.4 |
Basic Dimensions of Winding Wires Part 4: Diameters of Conductors for Round Resistance Wires |
|
CENELEC HD 420 S2 |
Control Switches (Low Voltage Switching - Devices for Control and Auxiliary Circuit, Including Contactor Relays) |
|
CENELEC HD 422 |
Low-Voltage Air-Break Switches, Air-Break Disconnectors, Air-Break Switch-Disconnectors and Fuse-Combination Units |
|
CENELEC HD 424 |
Specification for High- Voltage Fuse-Links for Motor Circuit Applications |
|
CENELEC HD 426.1 S1 |
Specification for Ceramic and Glass Insulating Materials - Part 1: Definitions and Classification |
|
CENELEC HD 426.2 S1 |
Specification for Ceramic and Glass Insulating Materials - Part 2: Methods of Test |
|
CENELEC HD 428 |
Three-Phase Oil-Immersed Public Distribution Transformers, 50 Hz, from 50 to 2500 kVA, with Highest Voltage for Equipment Not Exceeding 24 kV |
|
CENELEC HD 428/A1 |
AMD 1 Three-Phase Oil-Immersed Public Distribution Transformers, 50 Hz, from 50 to 2500 kVA, with Highest Voltage for Equipment Not Exceeding 24 kV |
|
CENELEC HD 448 S2 |
Common Clauses for High- Voltage Switchgear and Controlgear Standards |
|
CENELEC HD 465.1 |
Lead - Acid Traction Batteries Part 1: General Requirements and Methods of Test |
|
CENELEC HD 465.2 S1 |
Lead-Acid Traction Batteries-Part 2: Dimensions of Cells and Terminals and Marking of Polarity on Cells |
|
CENELEC HD 486 S1 |
Test Method for Evaluating the Oxidation Stability of Hydrocarbon Insulating Liquids-Superseded by EN 61125:1993 |
|
CENELEC HD 496 S1 |
Insulating Foam-Filled Tubes and Solid Rods for Live Working |
|
CENELEC HD 516 S1/A3 |
AMD 3 Guide to Use of Low Voltage Harmonized Cables |
|
CENELEC HD 516 S1/A6 |
AMD 6 Guide to Use of Low Voltage Harmonized Cables |
|
CENELEC HD 523.3.100 TO 105 S1 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 100 to 105: Extruded PVC Sleeving |
|
CENELEC HD 523.3.406 TO 408 S1 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 406 to 408: Glass Textile Sleeving with PVC Based Coating-Superseded by EN 60684-3-406 to 408 |
|
CENELEC HD 53.12 |
Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors for Voltages up to and Including 660 V, 50 Hz |
|
CENELEC HD 53.4 S2 |
Rotating Electrical Machines-Part 4: Methods for Determining Synchronous Machine Quantities from Tests |
|
CENELEC HD 540.2 S1 |
Insulation Co-Ordination Part 2: Application Guide |
|
CENELEC HD 541 S1 |
Methods of Test for the Determination of the Ignitability of Solid Electrical Insulating Materials When Exposed to Electrically Heated Wire Sources |
|
CENELEC HD 543.1 S1 |
Performance and Testing of Teleprotection Equipment of Power Systems Part 1: Narrow- Band Command Systems |
|
CENELEC HD 548.3 S1 |
Instrument Transformers Part 3: Combined Transformers |
|
CENELEC HD 553 S2 |
Current Transformers |
|
CENELEC HD 555.0.1 S1 |
Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 1 - Enamelled Round Copper Wire |
|
CENELEC HD 555.0.2 S1 |
Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 2: Enamelled Rectangular Copper Wire |
|
CENELEC HD 555.15 S1 |
Specifications for Particular Types of Winding Wires Part 15: Polyesterimide Enamelled Round Aluminium Winding Wire, class 180 |
|
CENELEC HD 555.21 S2 |
Specifications for Particular Types of Winding Wires Part 21: Solderable Polyurethane Enamelled Round Copper Wire Overcoated with Polyamide, Class 155 |
|
CENELEC HD 555.23 S1 |
Specifications for Particular Types of Winding Wires Part 23: Solderable Polyester (Imide) Enamelled Round Copper Winding Wire, Class 180 |
|
CENELEC HD 555.23 S2 |
Specifications for Particular Types of Winding Wires Part 23: Solderable Polyesterimide Enamelled Round Copper Wire, Class 180 |
|
CENELEC HD 555.25 S1 |
Specifications for Particular Types of Winding Wires Part 25: Polyester (Imide) Overcoated with Polyamide- Imide Enamelled Round Aluminium Winding Wire, Class 200 |
|
CENELEC HD 555.3 S1 |
Specifications for Particular Types of Winding Wires Part 3: Polyester Enamelled Round Copper Wire, Class 155-Superseded by EN 60317-3: 1994 |
|
CENELEC HD 555.32 S1 |
Specifications for Particular Types of Winding Wires Part 32: Glass-Fibre Wound, Polyester or Polyesterimide Varnish-Treated, Bare or Enamelled Rectangular Copper Wire, Temperature Index 155-Superseded by EN 60 317-32:1996 |
|
CENELEC HD 555.7 S1 |
Specifications for Particular Types of Winding Wires Part 7: Polyimide Enamelled Round Copper Winding Wire, Class 220 |
|
CENELEC HD 555.8 S1 |
Specifications for Particular Types of Winding Wires Part 8: Polyesterimide Enamelled Round Copper Winding Wire, Class 180 |
|
CENELEC HD 555.8 S2 |
Specifications for Particular Types of Winding Wires Part 8: Polyesterimide Enamelled Round Copper Wire, Class 180 |
|
CENELEC HD 558 S1 |
Economic Optimisation of Power Cable Size |
|
CENELEC HD 60269-3 |
Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F |
|
CENELEC HD 618 S1 |
General Classification of Insulating Liquids |
|
CENELEC HD 621 S1 |
Medium voltage impregnated paper insulated distribution cables |
|
CENELEC HD 627 S1 |
Multicore and Multipair Cable for Installation Above and Below Ground |
|
CENELEC HD 627 S1/A1 |
Multicore and Multipair Cable for Installation Above and Below Ground |
|
CENELEC HD 65.1 S1 |
Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 1: Lamp Caps-Superseded by EN 60061-1; Superseded by EN 60061-3:1993 |
|
CENELEC HD 93.2 |
Part 2: Electrical Equipment of Machines Used in Large Series Production Lines |
|
CENELEC ROBT-005 |
Information Concerning Plugs for Household Appliances Covered by CLC/TC 61 Used in the Various CENELEC Countries |
|
CENELEC CLC/TR 50442 |
Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fields-Supersedes R106-001:2002 |
|
CENELEC CLC/TR 61800-6 |
Adjustable speed electrical power drive systems – Part 6: Guide for determination of types of load duty and corresponding current ratings |
|
CENELEC CLC/TS 50217 |
Guide for in situ measurements – In situ measurement of disturbance emission |
|
CENELEC CLC-TS 61643-22 |
Low-voltage surge protective devices Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles |
|
CEN EN 10280 |
Magnetic Materials - Methods of Measurement of the Magnetic Properties of Electrical Sheet and Strip by Means of a Single Sheet Tester |
|
CEN EN 10332 |
Magnetic Materials Permanent magnet (magnetically hard) materials Methods of measurement of magnetic Properties |
|
CEN EN 12479 |
Wood Poles for Overhead Lines - Sizes - Methods of Measurement and Permissible Deviations |
|
CEN EN 12509 |
Timber Poles for Overhead Lines - Test Methods - Determination of Modulus of Elasticity, Bending Strength, Density and Moisture Content |
|
CENELEC EN 45510-2-4 |
Guide for Procurement of Power Station Equipment - Part 2-4: Electrical Equipment - High Power Static Convertors |
|
CENELEC EN 50068 |
Wrought Steel Enclosures for Gas-Filled High- Voltage Switchgear and Controlgear |
|
CENELEC EN 50085-1 |
Cable trunking systems and cable ducting systems for electrical installations Part 1: General requirements |
|
CENELEC EN 50122-1 |
Railway applications - Fixed installations Part 1: Protective provisions relating to electrical safety and earthing-Incorporating corrigendum August 2007 |
|
CENELEC EN 50123-7-2 |
Railway applications Fixed installations D.C. switchgear Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems Isolating current transducers and other current measuring devices |
|
CENELEC EN 50124-2 |
Railway Applications - Insulation Coordination Part 2: Overvoltages and Related Protection |
|
CENELEC EN 50143 |
Cables for Signs and Luminous-Discharge-Tube Installations Operating from a No-Load rated Output Voltage Exceeding 1 kV but Not Exceeding 10 kV-Includes amendment A1: 2003 |
|
CENELEC EN 50162 |
Protection against corrosion by stray current from direct current systems |
|
CENELEC EN 50187 |
Gas-Filled Compartments for a.c. Switchgear and Controlgear for Rated Voltages Above 1 kV and up to and Including 52 kV |
|
CENELEC EN 50216-6 |
Power Transformer and Reactor Fittings Part 6: Cooling Equipment - Removable Radiators for Oil-Immersed Transformers |
|
CENELEC EN 50272-4 |
Safety requirements for secondary batteries and battery installations - Part 4: Batteries for use in portable appliances |
|
CENELEC EN 50290-2-20 |
Communication Cables - Part 2-20: Common Design Rules and Construction - General-Supersedes HD 624.0 S1:1997 |
|
CENELEC EN 50290-2-21 |
Communication Cables - Part 2-21: Common Design Rules and Construction - PVC Insulation Compounds-Incorporates Amendment A1: 2007 |
|
CENELEC EN 50294 |
Measurement Method of Total Input Power of Ballast-Lamp Circuits-Includes Amendments A1:2001 and A2:2003 |
|
CENELEC EN 50363-2-2 |
Insulating, sheathing and covering materials for low voltage energy cables Part 2-2: Cross-linked elastomeric covering compounds |
|
CENELEC EN 50363-4-1 |
Insulating, sheathing and covering materials for low voltage energy cables Part 4-1: PVC sheathing compounds |
|
CENELEC EN 50363-4-2 |
Insulating, sheathing and covering materials for low voltage energy cables Part 4-2: PVC covering compounds |
|
CEN EN 50363-6 |
Insulating, sheathing and covering materials for low voltage energy cables Part 6: Halogen-free, cross-linked sheathing compounds |
|
CENELEC EN 50369 |
Liquid tight sheathing systems for cable management |
|
CENELEC EN 50438 |
Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks |
|
CENELEC EN 50464-2-2 |
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on distribution transformers meeting the requirements of EN 50464-2-1 |
|
CENELEC EN 50464-3 |
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 3: Determination of the power rating of a transformer loaded with non-sinusoidal currents |
|
CEN EN 60044-3 |
Instrument transformers Part 3: Combined transformers |
|
CENELEC EN 60079-29-2 |
Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen-Incorporates Corrigendum December 2007 |
|
CENELEC EN 60156 |
Insulating Liquids Determination of the Breakdown Voltage at Power Frequency Test Method (IEC 156 : 1995) |
|
CENELEC EN 60205 |
Calculation of the Effective Parameters of Magnetic Piece Parts-IEC 60205:2006 |
|
CENELEC EN 60255-22-2 |
Electrical Relays - Part 22: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Section 2: Electrostatic Discharge Tests-IEC 255-22-2:1996 |