|
CENELEC EN 60255-22-3 |
Electrical Relays - Part 22-3: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Radiated Electromagnetic Field Disturbance Tests-IEC 60255-22-3: 2000 |
|
CENELEC EN 60255-27 |
Measuring relays and protection equipment Part 27: Product safety requirements-IEC 60255-27:2005 |
|
CENELEC EN 60282-1 |
High-voltage fuses Part 1: Current-limiting fuses-IEC 60282-1: 2005 |
|
CENELEC EN 60289 |
Reactors-Includes Amendment A11:2002; IEC 60289:1988, Modified; Supersedes HD 539.S2:1992 |
|
CENELEC EN 60309-4 |
Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock |
|
CENELEC EN 60404-13 |
Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip |
|
CEN EN 60404-14 |
Magnetic materials Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method-IEC 60404-14: 2002 |
|
CENELEC EN 60454-3-1 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: PVC Film Tapes with Pressure-Sensitive Adhesive-Includes Amendment A1: 2001; IEC 60454-3-1: 1998 + A1: 2001 |
|
CENELEC EN 60454-3-10 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 10: Requirements for Cellulose-Acetate- Butyrate Film Tapes with Rubber Thermosetting Adhesive (IEC 454-3-10 : 1995) |
|
CENELEC EN 60454-3-12 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 12: Polyethylene Film Tapes with Pressure-Sensitive Adhesive-IEC 60454-3-12:1998 |
|
CENELEC EN 60454-3-19 |
Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides-IEC 60454-3-19:2003 |
|
CENELEC EN 60464-1 |
Varnishes used for electrical insulation Part 1: Definitions and general requirements-A1:2006 |
|
CENELEC EN 60507 |
Artificial Pollution Tests on High-Voltage Insulators to Be Used on A.C. Systems (IEC 507 : 1991) |
|
CENELEC EN 60570 |
Electrical supply track systems for luminaires-IEC 60570:2003, modified; Supersedes EN 60570-2-1:1994 + A1:1996 |
|
CENELEC EN 60587 |
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion |
|
CENELEC EN 60684-1 |
Flexible insulating sleeving Part 1: Definitions and general requirements-IEC 60684-1:2003 |
|
CENELEC EN 60684-3-209 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose, flame retarded, shrink ratio 2:1-IEC 60684-3-209:2003; Supersedes HD 523.3.209 S1:1989 |
|
CENELEC EN 60684-3-212 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 212: Heat-shrinkable polyolefin sleevings-IEC 60684-3-212: 2005; Supersedes EN 60684-3-212:1998, EN 60684-3-213:1999, EN 60684-3-217:1998 and EN 60684-3-218:1998 |
|
CENELEC EN 60684-3-216 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving-IEC 60684-3-216: 2001 |
|
CEN EN 60708 |
Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath-IEC 60708: 2005 |
|
CENELEC EN 60811-4-2 |
Insulating and sheathing materials of electric and optical cables Common test methods Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stab-IEC 60811-4-2:2004 |
|
CENELEC EN 60848 |
GRAFCET Specification Language for Sequential Function Charts-IEC 60848:2002 |
|
CENELEC EN 60852-4 |
Outline Dimensions of Transformers and Inductors for Use in Telecommunication and Electronic Equipment Part 4: Transformers and Inductors Using YUI-2 Laminations-IEC 852-4: 1996 |
|
CENELEC EN 60885-3 |
Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on lengths of extruded power cables-IEC 60885-3:1988 |
|
CENELEC EN 60889 |
Hard-Drawn Aluminium Wire for Overhead Line Conductors-Supersedes HD 532 S1: 1989; IEC 889: 1987 |
|
CENELEC EN 60893-1 |
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 1: Definitions, designations and general requirements-IEC 60893-1:2004 |
|
CENELEC EN 60893-3-6 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6: Specifications for individual materials Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003) |
|
CENELEC EN 60893-3-7 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-7: Specifications for individual materials Requirements for rigid laminated sheets based on polyimide resins-IEC 60893-3-7:2003 |
|
CENELEC EN 60895 |
Live working Conductive clothing for use at nominal voltage up to 800 kV a.c. and 600 kV d.c.-IEC 60895:2002 + corrigendum 2003, modified |
|
CENELEC EN 60901 |
Single-Capped Fluorescent Lamps - Performance Specifications-Includes Amendments A1: 1997 and A2:2000; IEC 60901:1996 + A1:1997 + A2:2000 |
|
CENELEC EN 60924 |
D.C. Supplied Electronic Ballasts for Tubular Fluorescent Lamps General and Safety Requirements (IEC 924/A1:1993)-A1: March 1994; Partly superseded by EN 61347-2-4: 2001, EN 61347-2-5: 2001, EN 61347-2-7: 2001 also EN 61347-2-6: 2001 |
|
CENELEC EN 60929 |
AC-supplied electronic ballasts for tubular fluorescent lamps — Performance requirements-Incorporates corrigendum: December 2006 |
|
CENELEC EN 60938-1 |
Fixed inductors for electromagnetic interference suppression Part 1: Generic specification-Incorporating Amendment A1: 02/2007 |
|
CENELEC EN 60969 |
Self-Ballasted Lamps for General Lighting Services - Performance Requirements-Includes Amendments A1:1993 and A2:2000; IEC 60969:1988 + A2:2000 |
|
CENELEC EN 61046 |
D.C. or a.c. Supplied Electronic Step-Down Convertors for Filament Lamps - General and Safety Requirements (Includes Amendment A1 : 1996) (IEC 1046 : 1993 + A1 : 1995)-Superseded by EN 61347-2-2: 2001 |
|
CENELEC EN 61048 |
Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements-IEC 61048:2006 |
|
CENELEC EN 61058-2-5 |
Switches for appliances Part 2-5: Particular requirements for change-over selectors-Includes amendment A11: 2002; IEC 1058-2-5: 1994 |
|
CENELEC EN 61061-1 |
Non-Impregnated Densified Laminated Wood for Electrical Purposes Part 1: Definitions, Designations and General Requirements |
|
CENELEC EN 61074 |
Determination of Heats and Temperatures of Melting and Crystallization of Electrical Insulating Materials by Differential Scanning Calorimetry (IEC 1074 : 1991) |
|
CENELEC EN 61138 |
Cables for portable earthing and short-circuiting equipment |
|
CENELEC EN 61204-6 |
Low-Voltage Power Supplies, DC Output Part 6: Requirements for Low-Voltage Power Supplies of Assessed Performance-IEC 61204-6:2000 |
|
CENELEC EN 61248-4 |
Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 4: Sectional Specification for Power Transformers for Switched Mode Power Supplies (SMPS) on the Basis of the Capability Approval Procedure-IEC 61248-4: 1996 |
|
CENELEC EN 61334-6 |
Distribution Automation Using Distribution Line Carrier Systems Part 6: A-XDR Encoding Rule-IEC 61334-6:2000 |
|
CENELEC EN 61378-2 |
Convertor Transformers Part 2: Transformers for HVDC Applications-IEC 61378-2:2001 |
|
CENELEC EN 61386-21 |
Conduit systems for cable management Part 21: Particular requirements Rigid conduit systems-Incorporates Corrigendum April 2004; |
|
CENELEC EN 61427 |
Secondary Cells and Batteries for Solar Photovoltaic Energy Systems - General Requirements and Methods of Test-IEC 61427:1999 |
|
CENELEC EN 61436 |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Sealed Nickel-Metal Hydride Rechargeable Single Cells-IEC 61436:1998; Superseded by EN 61951-2: 2003 |
|
CENELEC EN 61442 |
Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)-IEC 61442:2005, modified |
|
CENELEC EN 61482-1-2 |
Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test) |
|
CENELEC EN 61549 |
Miscellaneous Lamps-Amendment A1: March 2005; IEC 61549: 2003 |
|
CENELEC EN 61588-2-12 |
Safety of Power Transformers, Power Supply Units and Similar Part 2-17: Particular Requirements for Transformers for Switch Mode Power Supplies-Ratified European Text; IEC 61558-2-17: 1997 |
|
CENELEC EN 61619 |
Insulating Liquids - Contamination by Polychlorinated Biphenyls (PCBs) Method of Determination by Capillary Column Gas Chromatography-IEC 61 619: 1997 |
|
CENELEC EN 61726 |
Cable Assemblies, Cables, Connectors and Passive Microwave Components Screening Attenuation Measurement by the Reverberation Chamber Method-IEC 61726: 1999 |
|
CENELEC EN 61788-13 |
Superconductivity Part 13: AC loss measurements Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites-IEC 61788-13:2003 |
|
CENELEC EN 61811-11 |
Electromechanical elementary relays of assessed quality Part 11: Blank detail specification Relays for industrial application-IEC 61811-11:2002 |
|
CENELEC EN 62011-3-1 |
Insulating materials - Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes Part 3-1: Specifications for individual materials - Tubes and rods of rectangular and hexagonal cross-section-IEC 62011-3-1:2003 |
|
CENELEC EN 62021-2 |
Insulating liquids - Determination of acidity - Part 2: Colourimetric titration |
|
CENELEC EN 62114 |
Electrical insulation systems (EIS) - Thermal classification (IEC 62114:2001) |
|
CENELEC EN 62193 |
Live working Telescopic sticks and telescopic measuring sticks-IEC 62193:2003 |
|
CENELEC EN 62230 |
Electric cables - Spark-test method |
|
CENELEC EN 62237 |
Live working Insulating hoses with fittings for use with hydraulic tools and equipment-IEC 62237:2003, modified |
|
CEN EN 62271-107 |
High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV (IEC 62271-107:2005) |
|
CEN EN 62271-108 |
High-voltage switchgear and controlgear Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above-(IEC 62271-108:2005) |
|
CENELEC EN 62271-2 |
High-voltage switchgear and controlgear Part 2: Seismic qualification for rated voltages of 72,5 kV and above-IEC 62271-2:2003 |
|
CEN EN 62271-201 |
High-voltage switchgear and controlgear Part 201: AC insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV-Incorporates Corrigendum November 2006 |
|
CENELEC EN 62271-203 |
High-voltage switchgear and controlgear Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV-IEC 62271-203:2003; Supersedes EN 60517:1996 + A11:1999 |
|
CENELEC EN 62317-1 |
Ferrite cores - Dimensions - Part 1: General specification |
|
CENELEC EN 62323 |
Dimensions of half pot-cores made of ferrite for inductive proximity switches-(IEC 62323): 2005 |
|
CENELEC EN 62333-1 |
Noise suppression sheet for digital devices and equipment Part 1: Definitions and general properties-IEC 62333-1:2006 |
|
CENELEC ENV 50275-2-1 |
Conductive Charging for Electric Vehicles Part 2-1: Connection of an Electric Vehicle to an A.C/D.C. Supply-Ratified European Text |
|
CENELEC HD 194 |
Requirements Concerning the Electrical Safety of Laser - Apparatus and Installations |
|
CENELEC HD 199.2 S2 |
Tungsten Filament Lamps for General Service - Lamps with a Life of 2 500 Hours |
|
CENELEC HD 215 |
Safety Requirements for Indicating and Recording Electrical Instruments and Their Accessories |
|
CENELEC HD 219 S2 |
Low Pressure Sodium Vapour Lamps |
|
CENELEC HD 22.6 S1/ A1 |
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 6: Arc Welding Cables |
|
CENELEC HD 22.8 S2/A1 |
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 8: Polychloroprene or Equivalent Synthetic Elastomer Sheathed Cable for Decorative Chains |
|
CENELEC HD 22.9 S2/A1 |
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 9: Single Core Non-Sheathed Cables for Fixed Wiring Having Low Emission of Smoke and Corrosive Gases |
|
CENELEC HD 222 |
Standard Sheets for Barrel Thread for E14 and E27 Lampholder with Shade Holder Ring |
|
CENELEC HD 225 |
Rules for Rotating Electrical Machines for Rail and Road Vehicles |
|
CENELEC HD 233 |
Recommendations for Direct Acting Indicating Electrical Measuring Instruments and Their Accessories |
|
CENELEC HD 242 |
Maximum Case Dimensions for Capacitors and Resistors |
|
CENELEC HD 307.3.1 S1 |
Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 3: Specifications for Individual Materials. Sheet one: Unfilled Epoxy Resinous Compounds |
|
CENELEC HD 307.3.3 S1 |
Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 3: Specifications for Individual Materials. Sheet Three: Unfilled Polyurethane Compounds |
|
CENELEC HD 331 |
Standard Direction of Movement for Actuators Which Control the Operation of Electrical Apparatus |
|
CENELEC HD 347 S1 |
Mechanical Vibration of Certain Rotating Electrical Machinery with Shaft Heights Between 80 and 400 mm Measurement and Evaluation of the Vibration Severity |
|
CENELEC HD 348 S2 |
High-voltage Alternating- Current Circuit-Breakers |
|
CENELEC HD 348 S4 |
High-Voltage Alternating- Current Circuit-Breakers |
|
CENELEC HD 348 S5 |
High-Voltage Alternating-Current Circuit-Breakers (IEC 56:1987+A1:1992, Modified) |
|
CENELEC HD 352.3.2 S1 |
Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 2: Mica Paper |
|
CENELEC HD 352.3.4 S1 |
Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 4: Polyester Film-Backed Mica Paper with a B-Stage Epoxy Resin Binder (IEC 371-3-4:1992) |
|
CENELEC HD 352.3.5 S1 |
Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 5: Glass-Backed Mica Paper with an Epoxy Resin Binder for Post-Impregnation (VPI) (IEC 371-3-5:1992) |
|
CENELEC HD 352.3.6 S1 |
Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 6: Glass-Backed Mica Paper with a B-Stage Epoxy Resin Binder (IEC 371-3-6:1992) |
|
CENELEC HD 355 |
High Voltage Switches |
|
CENELEC HD 394.1 |
Specification for Conduits for Electrical Installations Part 1 General Requirements |
|
CENELEC HD 415 |
Detection and Determination of Specified Anti-Oxydant Additives in Insulating Oils |
|
CENELEC HD 416.1 |
Specification for Vulcanized Fibre for Electrical Purposes Part 1: Definitions and General Requirements |
|
CENELEC HD 416.2 S1 |
Specification for Vulcanized Flore for Electrical Purposes- Part 2: Methods of Test |
|
CENELEC HD 416.3.1 S1 |
Specification for Vulcanized Fibre for Electrical Purposes- Part 3: Specifications for Individual Materials. Sheet One: Flat Sheets |
|
CENELEC HD 419 |
Low-Voltage Switchgear and Controlgear Contactors |
|
CENELEC HD 419.3 S1 |
Low-Voltage Controlgear Part 3: Additional Requirements for Contactors Subject to Certification-Superseded by EN 61095:1993 |
|
CENELEC HD 42.2 S2 |
Basic Dimensions of Winding Wires - Part 2: Maximum Over-All Diameters of Enamelled Round Winding Wires |
|
CENELEC HD 488 S1 |
Gassing of Insulating Liquids Under Electrical Stress and Ionization |
|
CENELEC HD 489 S1 |
Recommended Dimensions for Hexagonal and Square Crimping-Die Cavities, Indentors, Gauges, Outer Conductor Crimp Sleeves and Centre Contact Crimp Barrels for R.F. Cables and Connectors |
|
CENELEC HD 492.1 S2 |
High-Voltage Fuses; Part 1: Current Limiting Fuses-Superseded by EN 60 282-1: 1993 |
|
CENELEC HD 506 S1 |
Bushings for Liquid Transformers Above 1kv up to 33kv |
|
CENELEC HD 516 S1/A2 |
AMD 2 Guide to Use of Low Voltage Harmonized Cables |
|
CENELEC HD 523.3.116 TO 118 S1 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 116 to 118: Extruded Polychloroprene, General Purpose-Superseded by EN 60684-3-116 AND 117: 2003 |
|
CENELEC HD 523.3.121 .122 S1 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirement for Individual Types of Sleeving Sheets 121 and 122: Extruded Silicone Sleevings |
|
CENELEC HD 523.3.300 S1 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving |
|
CENELEC HD 523.3.403 TO 405 S1 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 403 to 405: Glass Textile Sleeving with Acrylic Based Coating-Superseded by EN 60684-3-403 to 405:2002 |
|
CENELEC HD 53.1 S2/ A2 |
AMD 2 Rotating Electrical Machines - Part 1: Rating and Performance |
|
CENELEC HD 53.12 S1/ A1 |
AMD 1 Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors for Voltages up to and Including 660 V, 50 Hz |
|
CENELEC HD 53.16.1 S1 |
Rotating Electrical Machines Part 16: Excitation Systems for Synchronous Machines Chapter 1: Definitions |
|
CENELEC HD 53.6 S1 |
Rotating Electrical Machines Part 6: Methods of Cooling Rotating Machinery |
|
CENELEC HD 53.9 |
Rotating Electrical Machines Part 9: Noise Limits |
|
CENELEC HD 539 S2 CORR 1 |
CORRIGENDUM Reactors |
|
CENELEC HD 543.2.S1 |
Performance and Testing of Teleprotection Equipment of Power Systems Part 2: Analogue Comparison Systems (IEC 834-2:1993, Modified) |
|
CENELEC HD 555.0.1 S2 |
Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 1 - Enamelled Round Copper Wire |
|
CENELEC HD 555.0.4 S2 |
Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 4: Glass-Fibre Wound Bare or Enamelled Rectangular Copper Wire |
|
CENELEC HD 555.15 S2 |
Specifications for Particular Types of Winding Wires Part 15: Polyesterimide Enamelled Round Aluminium Wire, Class 180-Superseded by EN 60317-15: 1994 |
|
CENELEC HD 555.18 S1 |
Specifications for Particular Types of Winding Wires Part 18: Polyvinyl Acetal Enamelled Rectangular Copper Winding Wire, Class 120 |
|
CENELEC HD 555.19 S2 |
Specifications for Particular Types of Winding Wires Part 19: Solderable Polyurethane Enamelled Round Copper Wire Overcoated with Polyamide, Class 130 |
|
CENELEC HD 555.22 S1 |
Specifications for Particular Types of Winding Wires Part 22: Polyester (Imide) Enamelled Round Copper Winding Wire Overcoated with Polyamide, Class 180 |
|
CENELEC HD 555.26 S1 |
Specifications for Particular Types of Winding Wires Part 26: Polyamide-Imide Enamelled Round Copper Winding Wire, Class 200 |
|
CENELEC HD 555.30 S1 |
Specifications for Particular Types of Winding Wires Part 30: Polyimide Enamelled Rectangular Copper Wire, Class 220-Superseded by EN 60317-30: 1996 |
|
CENELEC HD 555.34 S1 |
Specifications for Particular Types of Winding Wires Part 34: Polyester Enamelled Round Copper Wire, Class 130 |
|
CENELEC HD 555.4 S1 |
Specifications for Particular Types of Winding Wires Part 4: Solderable Polyurethane Enamelled Round Copper Winding Wire, Class 130 |
|
CENELEC HD 555.4 S2 |
Specifications for Particular Types of Winding Wires Part 4: Solderable Polyurethane Enamelled Round Copper Wire, Class 130 |
|
CENELEC HD 581 S1 |
Application Guide for Calculation of Short- Circuit Currents in Low-Voltage Radial Systems |
|
CENELEC HD 586.1 S1 |
Mineral Insulated Cables with a Rated Voltage not Exceeding 750 V Part 1: Cables |
|
CENELEC HD 586.2 S1 |
Mineral Insulated Cables with a Rated Voltage not Exceeding 750 V Part 2: Terminations-Superseded by EN 60702-2:2002 |
|
CENELEC HD 590 S1 |
Mechanical Coupler for Measurements on Bone Vibrators |
|
CENELEC HD 603 S1 |
Distribution Cables of Rated Voltage 0.6/1 kV |
|
CENELEC HD 631.1 S1 |
Material Characterisation Part 1: Compounds for Use in Cable Accessories: Resinous Compounds Before Cure and in the Cured State |
|
CENELEC HD 65 |
Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety |
|
CENELEC HD 65.3 |
Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 3: Gauges |
|
CENELEC HD 77 |
Lighting Fittings for Incandescent Lamps for Domestic and Similar Purposes |
|
CEN EN 10251 |
Magnetic Materials - Methods of Determination of the Geometrical Characteristics of Electrical Steel Sheet and Strip |
|
CEN EN 12511 |
Wood Poles for Overhead Lines - Determination of Characteristic Values |
|
CEN EN 13032-1 |
Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format |
|
CEN EN 45510-2-5 |
Guide for Procurement of Power Station Equipment Part 2-5: Electrical Equipment Motors |
|
CEN EN 45510-2-7 |
Guide for Procurement of Power Station Equipment Part 2-7: Electrical Equipment Switchgear and Controlgear |
|
CENELEC EN 45510-2-8 |
Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables |
|
CENELEC EN 50025 |
Low Voltage Switchgear and Controlgear for Industrial Use. Inductive Proximity Switches. Form C, for Direct Current, 3 or 4 Terminals |
|
CENELEC EN 50035 |
Low Voltage Switchgear and Controlgear for Industrial Use: Mounting Rails; G-Profile for the Fixing of Terminal Blocks |
|
CENELEC EN 50045 |
Low Voltage Switchgear and Controlgear for Industrial Use: Mounting Rails: Top Hat Rails, 15 mm Wide for the Fixing of Terminal Blocks |
|
CENELEC EN 50086-2-1 |
Conduit systems for cable management Part 2-1: Particular requirements for rigid conduit systems-Includes amendment A11:1998; Incorporating corrigendum February 2001 |
|
CENELEC EN 50119 |
Railway Applications - Fixed Installations - Electric Traction Overhead Contact Lines |
|
CENELEC EN 50123-7-1 |
Railway applications Fixed installations D.C. switchgear Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems Application guide-Supersedes ENV 50123-7-1:1999 |
|
CENELEC EN 50171 |
Central Power Supply Systems-Incorporating Corrigendum August 2001 |
|
CENELEC EN 50216-8 |
Power transformer and reactor fittings Part 8: Butterfly valves for insulating liquid circuits-Incorporating Amendment 1: 2006 |
|
CENELEC EN 50227 |
Control Circuit Devices and Switching Elements Proximity Sensors, d.c. Interface for Proximity Sensors and Switching Amplifiers (NAMUR)-Ratified European Text |
|
CENELEC EN 50266-2-5 |
Common Test Methods for Cables under Fire Conditions - Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables Part 2-5: Procedures - Small Cables - Category D-Incorporating Corrigendum March 2002 |
|
CENELEC EN 50285 |
Energy Efficiency of Electric Lamps for Household Use - Measurement Methods |
|
CENELEC EN 50290-2-22 |
Communication Cables - Part 2-22: Common Design Rules and Construction - PVC Sheathing Compounds-Incorporates Amendment A1: June 2007 |
|
CENELEC EN 50290-2-26 |
Communication cables Part 2-26: Common design rules and construction - Halogen free flame retardant insulation compounds-Incorporating Amendment A1: 6/2007 |
|
CENELEC EN 50328 |
Railway applications Fixed installations Electronic power convertors for substations-Partly Superedes EN 60146-1-1:1993 |
|
CENELEC EN 50341 PARTS 1-3 |
Overhead electrical lines exceeding AC 45 kV Part 1: General requirements Common specifications; Part 2: Index of National Normative Aspects; Part 3: Set of National Normative Aspects |
|
CENELEC EN 50341-2 |
Overhead electrical lines exceeding AC 45 kV Part 2: Index of National Normative Aspects-Incorporating corrigendum October 2006 |
|
CENELEC EN 50363-10-1 |
Insulating, sheathing and covering materials for low voltage energy cables Part 10-1: Miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC) |
|
CEN EN 50363-5 |
Insulating, sheathing and covering materials for low voltage energy cables Part 5: Halogen-free, cross-linked insulating compounds |
|
CENELEC EN 50363-9-1 |
Insulating, sheathing and covering materials for low voltage energy cables Part 9-1: Miscellaneous insulating compounds - Cross-linked polyvinyl chloride (XLPVC) |
|
CENELEC EN 50367 |
Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access) |
|
CENELEC EN 50386 |
Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers-Supersedes HD 596 S1:1996 |
|
CENELEC EN 50387 |
Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers-Supersedes HD 607 S1:1996 |
|
CEN EN 50393 |
Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV-:2000 |
|
CENELEC EN 50464-4 |
Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 4: Requirements and tests concerning pressurised corrugated tanks |
|
CENELEC EN 60034-2-1 |
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
|
CENELEC EN 60034-28 |
Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors |
|
CENELEC EN 60079-19 |
Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
|
CENELEC EN 60255-22-1 |
Electrical relays Part 22-1: Electrical disturbance tests for measuring relays and protection equipment - 1 MHz burst immunity tests (IEC 60255-22-1:2005)-IEC 60255-22-1:2005 |
|
CENELEC EN 60255-22-6 |
Electrical Relays - Part 22-6: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Immunity to Conducted Disturbances Induced by Radio Frequency Fields-IEC 60255-22-6:2001 |
|
CENELEC EN 60255-24 |
Electrical Relays Part 24: Common Format for Transient Data Exchange (COMTRADE) for Power Systems-IEC 60255-24: 2001 |
|
CENELEC EN 60255-8 |
Electrical Relays Part 8: Thermal Electrical Relays-IEC 60255-8:1990, Modified |
|
CENELEC EN 60296 |
Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear-IEC 60296:2003; Incorporates Corrigendum September 2004 |
|
CENELEC EN 60317-0-1 |
Specifications for Particular Types of Winding Wires - Part 0-1: General Requirements - Enamelled Round Copper Wire-Includes amendments A1:2000 and A2:2005; IEC 60317-0-1:1997 + A1:1999 |
|
CENELEC EN 60317-0-2 |
Particular Types of Winding Wires - Part 0-2: General Requirements - Enamelled Rectangular Copper Wire-Including amendments A1:2000 and A2:2005; IEC 60317-0-2:1997 + A1:1999 + A2:2005 |
|
CENELEC EN 60332-2-1 |
Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable Apparatus-Partially Supersedes EN 50265-1:1998 |
|
CENELEC EN 60343 |
Recommended Test Methods for Determining the Relative Resistance of Insulating Materials to Breakdown by Surface Discharges (IEC 343: 1991) |
|
CENELEC EN 60401-1 |
Terms and nomenclature for cores made of magnetically soft ferrites Part 1: Terms used for physical irregularities-IEC 60401-1: 2002 |
|
CENELEC EN 60401-2 |
Terms and nomenclature for cores made of magnetically soft ferrites Part 2: Reference of dimensions-IEC 60401-2: 2003 |
|
CENELEC EN 60401-3 |
Terms and nomenclature for cores made of magnetically soft ferrites Part 3: Guidelines on the format of data appearing in manufacturers´ catalogues of transformer and inductor cores-IEC 60401-3: 2003 |
|
CENELEC EN 60432-2 |
Incandescent Lamps - Safety Specifications Part 2: Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes-IEC 60432-2:1999 + A1:2005, modified |
|
CENELEC EN 60454-3-11 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives |
|
CENELEC EN 60454-3-14 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 14: Polytetrafluoroethylene Film Tapes with Pressure-Sensitive Adhesive-IEC 60454-3-14: 2001 |
|
CENELEC EN 60454-3-4 |
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive |
|
CENELEC EN 60454-3-6 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 6: Polycarbonate Film Tapes with Acrylic Thermoplastic Adhesive-IEC 60454-3-6: 1998 |
|
CENELEC EN 60454-3-7 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 7: Polyimide Film Tapes with Pressure-Sensitive Adhesive-IEC 60454-3-7: 1998 |
|
CENELEC EN 60464-2 |
Varnishes used for electrical insulation Part 2: Methods of test-Incorporating Amendment A1: 03/2006 and Corrigendum: 12/2006 |
|
CENELEC EN 60556 |
Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties-IEC 60556:2006 |
|
CENELEC EN 60567 |
Oil-filled electrical equipment - Sampling of gases and of oil for analysis of free and dissolved gases - Guidance-(IEC 60567):2005 |
|
CENELEC EN 60662 |
High Pressure Sodium Vapour Lamps |
|
CENELEC EN 60674-3-1 |
Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 1: Biaxially Oriented Polypropylene (PP) Film for Capacitors-IEC 60674-3-1: 1998 |
|
CENELEC EN 60674-3-2 |
Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Requirements for Balanced Biaxially Oriented Polyethylene Terephthalate (PET) Films Used for Electrical Insulation-IEC 60674-3-2:1992 |
|
CENELEC EN 60684-3-340 TO 342 |
Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 340 to 342: Expandable Braided Polyethylene Terephthalate Textile Sleeving-IEC 60684-3-340 to 342 : 1992 |
|
CENELEC EN 60702-2 |
Mineral Insulated Cables and Their Terminations with a Rated Voltage Not Exceeding 750 V Part 2: Terminations-Supersedes HD 586.2 S1:1994; IEC 60702-2:2002 |
|
CENELEC EN 60810 |
Lamps for road vehicles - Performance requirements-Supersedes EN 60810:1994 + A1:2001 + A2:2001; IEC 60810:2003 |
|
CENELEC EN 60811-2-1 |
Insulating and sheathing materials of electric and optical cables Common test methods Part 2-1: Methods specific to elastomeric compounds Ozone resistance, hot set and mineral oil immersion tests-Includes amendment A1:2001; IEC 60811-2-1:1998 + A1:2001 |
|
CENELEC EN 60814 |
Insulating Liquids - Oil-Impregnated Paper and Pressboard Determination of Water by Automatic Coulometric Karl Fischer Titration-IEC 60814: 1997; Supersedes HD 487 S1: 1987 |
|
CENELEC EN 60836 |
Specifications for unused silicone insulating liquids for electrotechnical purposes-Supersedes HD 565 S1:1993; IEC 60836:2005 |
|
CENELEC EN 61061-3-2 |
Non-Impregnated Densified Laminated Wood for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 2: Sheets Produced from Beech Veneer-IEC 61061-3-2:2001 |
|
CENELEC EN 61065 |
Method for Evaluating the Low Temperature Flow Properties of Mineral Insulating Oils After Ageing (IEC 1065:1991) |
|
CENELEC EN 61086-2 |
Specification for Coatings for Loaded Printed Wire Boards (Conformal Coatings) Part 2: Methods of Test;-(IEC 1086-2 : 2004) |
|
CENELEC EN 61125 |
Unused hydrocarbon-based insulating liquids Test methods for evaluating the oxidation stability-Includes amendment A1:2004; Supersedes HD 486 S1:1987 |
|
CENELEC EN 61199 |
Single-Capped Fluorescent Lamps - Safety Specifications-IEC 61199: 1999 |
|
CENELEC EN 61212-3-1 |
Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Part 3: Specifications for individual materials Sheet 1: Round laminated rolled tubes-IEC 61212-3-1:2006 |
|
CENELEC EN 61228 |
Method of Measuring and Specifying the UV-Radiation of Ultraviolet Lamps Used for Sun-Tanning-Includes Amendment A1: 1996; IEC 1228: 1993 + A1: 1996 |
|
CENELEC EN 61238-1 |
Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) Part 1: Test methods and requirements-IEC 61238-1:2003, modified |
|
CENELEC EN 61284 |
Overhead Lines - Requirements and Tests for Fittings-IEC 61284: 1997 |
|
CENELEC EN 61334-3-22 |
Distribution Automation Using Distribution Line Carrier Systems Part 3-22: Mains Signalling Requirements - MV Phase-to-Earth and Screen-to-Earth Intrusive Coupling Devices-IEC 61334-3-22:2001 |
|
CENELEC EN 61340-3-1 |
Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms |
|
CENELEC EN 61434 |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes Guide to the Designation of Current in Alkaline Secondary Cell and Battery Standards-IEC 1434: 1996 |
|
CENELEC EN 61478 |
Live Working - Ladders of Insulating Material-Including Amendment A1: 2003; IEC 61478: 2001 |
|
CENELEC EN 61621 |
Dry, Solid Insulating Materials - Resistance Test to High-Voltage, Low-Current Arc Discharges-IEC 61621: 1997 |
|
CENELEC EN 61660-1 |
Short-Circuit Currents in D.C. Auxiliary Installations in Power Plants and Substations Part 1: Calculation of Short-Circuit Currents-IEC 61660-1:1997 |
|
CENELEC EN 61788-8 |
Superconductivity Part 8: AC loss measurements - Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method-IEC 61788-8:2003 |
|
CENELEC EN 61811-51 |
Electromechanical All-or-Nothing Relays Part 51: Blank Detail Specification Electromechanical All-or-Nothing Telecom Relays of Assessed Quality Non-Standardized Types and Construction-Supersedes BEN 116501: 1996; IEC 61811-51: 2002 |
|
CENELEC EN 61811-53 |
Electromechanical All-or-Nothing Relays Part 53: Blank Detail Specification Electromechanical All-or-Nothing Telecom Relays of Assessed Quality Two Change-Over Contacts, 14 mm x 9 mm Base-IEC 61811-53: 2002; Supersedes EN 116503: 1992 + A1: 1995 |
|
CENELEC EN 62013-2 |
Caplights for use in mines susceptible to firedamp Part 2: Performance and other safety-related matters-IEC 62013-2: 2005 |
|
CENELEC EN 62026-1 |
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules |
|
CENELEC EN 62044-2 |
Cores made of soft magnetic materials - Measuring methods Part 2: Magnetic properties at low excitation level-IEC 62044-2:2005 |
|
CENELEC EN 62053-61 |
Electricity Metering Equipment (a.c.) Particular Requirements Part 61: Power Consumption and Voltage Requirements-IEC 62053-61:1998 |
|
CENELEC EN 62211 |
Inductive components Reliability management-IEC 62211:2003 |
|
CENELEC EN 62231 |
Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria |
|
CENELEC EN 62271-3 |
High-voltage switchgear and controlgear Part 3: Digital interfaces based on IEC 61850-IEC 62271-3:2006 |
|
CENELEC EN 62317-4 |
Ferrite cores - Dimensions Part 4: RM-cores and associated parts-IEC 62317-4:2005;:1997 + A2:1998 |
|
CENELEC EN 62329-1 |
Heat shrinkable moulded shapes Part 1: Definitions and general requirements-Incorporates corrigendum: December 2006 |
|
CENELEC HD 109.1 S1 |
Miniature Fuses Part 1: Definitions for Miniature Fuses and General Requirements for Miniature Fuse-Links |
|
CENELEC HD 109.3 S1 |
Miniature Fuses Part 3: Sub-Miniature Fuse-Links |
|
CENELEC HD 119 |
Fuse-Holders for Miniature Cartridge Fuse-Links |
|
CENELEC HD 184 S4 |
A.C. Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1kv and up to and Including 72.5kV |
|
CENELEC HD 187 S5 |
A.C. Metal-Enclosed Switchgear and Control Gear for Rated Voltages Above 1 kV and up to and Including 52 kV |
|
CENELEC HD 211.2 S8 |
Primary Batteries - Part 2: Specification Sheets |
|
CENELEC HD 22.10 S1/A1 |
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 10: EPR Insulated and Polyurethane Sheathed Flexible Cable |
|
CENELEC HD 22.12 S1/A1 |
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 12: Heat Resistant EPR Cords and Flexible Cables |
|
CENELEC HD 22.14 S1/A1 |
AMD 1 Rubber Insulated Cables of Rated Voltages up to and Including 450/750 V Part 14: Cords for Applications Requiring High Flexibility |
|
CENELEC HD 23 |
Electrical Installations for Caravans with Supply Voltages up to 250 V |
|
CENELEC HD 231 |
Dimensions of Three-Phase Induction Motors-Superseded by EN 50347:2001 |
|
CENELEC HD 250.2 |
General Specification for Electric Motor Operated Appliances for Household and Similar Purposes |
|
CENELEC HD 307.2 S1 |
Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 2: Methods of Test |
|
CENELEC HD 307.2.2 S1 |
Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 2: Methods of Test. Test Methods for Coating Powders for Electrical Purposes |
|
CENELEC HD 307.3.2 S1 |
Specification for Solventless Polymerisable Resinous Compounds Used for Electrical Insulation- Part 3: Specifications for Individual Materials. Sheet Two: Quartz Filled Epoxy Resinous Compounds |
|
CENELEC HD 348 S3 |
High Voltage Alternating- Current Circuit-Breakers |
|
CENELEC HD 352.1 S2 |
Specification for Insulating Materials Based on Mica-Part 1: Definitions and General Requirements |
|
CENELEC HD 388 |
Transformers for Tubular Discharge Lamps Having a No-Load Output Voltage Exceeding 1000 V (Generally Called Neon- Transformers) |
|
CENELEC HD 390 |
Inductive Voltage Dividers |
|
CENELEC HD 393 |
Outside Diameters of Conduits for Electrical Installations and Threads for Conduits and Fittings |
|
CENELEC HD 398.2 S1/ A1 |
AMD 1 Power Transformers Part 2: Temperature Rise-Superseded by EN 60076-2: 1997 |
|
CENELEC HD 402 S2 |
Standard Colours for Thermoplastic Materials Used for the Insulation for Low-Frequency Cables and Wires |
|
CENELEC HD 418 |
Low-Voltage Switchgear and Controlgear Circuit- Breakers |
|
CENELEC HD 42.3 S2 |
Basic Dimensions of Winding Wires - Part 3: Dimensions of Conductors of Rectangular Copper Winding Wires |
|
CENELEC HD 42.4 S1 |
Basic Dimensions of Winding Wires Part 4: Diameters of Conductors for Round Resistance Wires |
|
CENELEC HD 426.3 S1 |
Specification for Ceramic and Glass Insulating Materials- Part 3: Individual Materials |
|
CENELEC HD 444.2.1 |
Fire Hazard Testing Part 2: Test Methods Glow- Wire Test and Guidance |
|
CENELEC HD 464 S1 |
Dry-Type Power Transformers-Includes Amendment A1:1988, A2:1991, A3:1992, A4:1995 and A5:2002; IEC 60726:1982 + A1:1986, Modified |
|
CENELEC HD 492.1 S2/ A1 |
AMD 1 High-Voltage Fuses Part 1: Current Limiting Fuses |
|
CENELEC HD 497 S1 |
Specifications for Unused Insulating Liquids Based on Synthetic Aromatic Hydrocarbons |
|
CENELEC HD 516 S1/A1 |
AMD 1 Guide to Use of Low Voltage Harmonized Cables |
|
CENELEC HD 516 S1/A5 |
AMD 5 Guide to Use of Low Voltage Harmonized Cables |
|
CENELEC HD 523.2 S1 |
Specification for Flexible Insulating Sleeving-Part 2: Methods of Tests |
|
CENELEC HD 523.3.320 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheet 320: Polyethylene Terephthalate Textile, Lightly Impregnated (IEC 684-3-320 : 1987) |
|
CENELEC HD 523.3.320 S1 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving |
|
CENELEC HD 523.3.400 TO 402 S1 |
Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 400 to 402: Glass Textile Sleeving with Silicone Elastomer Coating |
|
CENELEC HD 53.2 |
Rotating Electrical Machines Part 2 Methods for Determining Losses and Efficiency of Rotating Electrical Machinery from Tests (Excluding Machines for Traction Vehicles) |
|
CENELEC HD 53.7 S1 |
Rotating Electrical Machines Part 7: Symbols for Types of Construction and Mounting Arrangements of Rotating Electrical Machinery |
|
CENELEC HD 533 S1 |
Short-Circuit Current Calculation in Three- Phase a.c. Systems-Superseded by EN 60909-0:2001 |
|
CENELEC HD 539 S1 |
Reactors |
|
CENELEC HD 542 S1 |
Insulating Poles (Insulating Sticks) and Universal Tool Attachments (Fittings) for Live Working |
|
CENELEC HD 555.0.2 S2 |
Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 2 - Enamelled Rectangular Copper Wire |
|
CENELEC HD 555.0.3 S1 |
Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 3: Enamelled Round Aluminium Wire-Superseded by CENELEC EN 60 317-0-3: 1994 |
|
CENELEC HD 555.0.4 S1 |
Specifications for Particular Types of Winding Wires Part 0: General Requirements Section 4: Glass-Fibre Wound Bare or Enamelled Rectangular Copper Wire |
|
CENELEC HD 555.1 S1 |
Specifications for Particular Types of Winding Wires Part 1: Polyvinyl Acetal Enamelled Round Copper Winding Wire, Class 105 |
|
CENELEC HD 555.11 S1 |
Specifications for Particular Types of Winding Wires Part 11: Bunched Solderable Polyurethane Enamelled Round Copper Wires, Class 130, with Silk Covering |
|
CENELEC HD 555.13 S1 |
Specifications for Particular Types of Winding Wires Part 13: Polyester (imide) Overcoated with Polyamide-Imide, Enamelled Round Copper Winding Wire, Class 200 |
|
CENELEC HD 555.14 S2 |
Specifications for Particular Types of Winding Wires Part 14: Polyvinyl Acetal Enamelled Round Aluminium Wire, Class 105 |
|
CENELEC HD 555.16 S2 |
Specifications for Particular Types of Winding Wires Part 16: Polyester Enamelled Rectangular Copper Wire, Class 155-Superseded by EN 60317-16: 1994 |
|
CENELEC HD 555.18 S2 |
Specifications for Particular Types of Winding Wires Part 18: Polyvinyl Acetal Enamelled Rectangular Copper Wire, Class 120 |
|
CENELEC HD 555.2 S1 |
Specifications for Particular Types of Winding Wires Part 2: Solderable Polyurethane Enamelled Round Copper Winding Wire, Class 130, with a Bonding Layer |
|
CENELEC HD 555.20 S1 |
Specifications for Particular Types of Winding Wires Part 20: Solderable Polyurethene Enamelled Round Copper Winding Wire, Class 155 |
|
CENELEC HD 555.24 S1 |
Specifications for Particular Types of Winding Wires Part 24: Polyester (Imide) Enamelled Round Aluminium Winding Wire Overcoated with Polyamide, Class 180 |
|
CENELEC HD 555.27 S1 |
Specification for Particular Types of Winding Wires Part 27: Paper Covered Rectangular Copper Winding Wire |
|
CENELEC HD 555.27 S2 |
Specifications for Particular Types of Winding Wires Part 27: Paper Covered Rectangular Copper Wire |
|
CENELEC HD 555.33 S1 |
Specifications for Particular Types of Winding Wires Part 33: Glass-Fibre Wound, Silicone Varnish-Treated, Bare or Enamelled Rectangular Copper Wire, Temperature Index 200-Superseded by EN 60 317-33:1996 |
|
CENELEC HD 586.3 S1 |
Mineral Insulated Cables with a Rated Voltage Not Exceeding 750 V Part 3: Guide to Use |
|
CENELEC HD 607 S1 |
Busbar Bushings up to 1 kV and from 1,25 kA to 5 kA, for Liquid Filled Transformers |
|
CENELEC HD 614 S1 |
Direct-Current Resistive Volt Ratio Boxes-Superseded by EN 60524: 1993 |
|
CENELEC HD 65.2 |
Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 2: Lampholders |