|
CENELEC EN 50289-1-1 |
Communication Cables - Specifications for Test Methods Part 1-1: Electrical Test Methods - General Requirements |
|
CENELEC EN 50289-1-11 |
Communication Cables - Specifications for Test Methods Part 1-11: Electrical Test Methods - Characteristic Impedance, Input Impedance, Return Loss |
|
CENELEC EN 50289-1-6 |
Communication Cables - Specifications for Test Methods Part 1-6: Electrical Test Methods - Electromagnetic Performance |
|
CENELEC EN 50290-1-2 |
Communication cables Part 1-2: Definitions |
|
CENELEC EN 55016-1-2 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus Ancillary equipment Conducted disturbances-Incorporating amendments A1: 2/2005 and A2: 12/2006 |
|
CENELEC EN 55016-1-3 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power-CISPR 16-1-3:2004 |
|
CENELEC EN 60092-507 |
Electrical Installations in Ships Part 507: Pleasure Craft |
|
CENELEC EN 60249-2-4 |
Base Materials for Printed Circuits Part 2: Specifications Specification No.4: Epoxide Woven Glass Fabric Copper-Clad Laminated Sheet, General Purpose Grade-Including Amendments A3:1994, A4:1995 and A5:2000; IEC 249-2-4:1987 + A1:1989 + A2:1992 + A3:1993 + A4:1994 + A5:2000; Supersedes HD 313.2.4 S2:1990 |
|
CENELEC EN 60617-10 |
Graphical Symbols for Diagrams Part 10: Telecommunications: Transmission-IEC 617-10: 1996 |
|
CENELEC EN 60617-5 |
Graphical Symbols for Diagrams Part 5: Semiconductors and Electron Tubes-IEC 617-5: 1996 |
|
CENELEC EN 60747-5-1 |
Discrete semiconductor devices and integrated circuits Part 5-1: Optoelectronic devices General-Includes amendments A1:2002 + A2:2002; IEC 60747-5-1:1997 + A1:2001 + A2:2002 |
|
CENELEC EN 60801-2 |
Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 2: Electrostatic Discharge Requirements (IEC 801-2:1991) |
|
CENELEC EN 61643-331 |
Components for low-voltage surge protective devices Part 331: Specification for metal oxide varistors (MOV)-IEC 61643-331: 2003 |
|
CENELEC EN 61784-1 |
Digital data communications for measurement and control Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems-IEC 61784-1:2003 + corrigendum 2004; Partially supersedes EN 50170:1996 + A1:2002 + A2:1999 + A3:2002 and EN 50254:1998 |
|
CEN EN 818-1 |
Short Link Chain for Lifting Purposes - Safety Part 1 - General Conditions of Acceptance |
|
CEN EN ISO 16104 |
Packaging - Transport Packaging for Dangerous Goods - Test Methods-ISO 16104:2003 |
|
CEN EN ISO 16484-5 |
Building automation and control systems - Part 5: Data communication protocolcity-ISO 16484-5:2003; Supersedes ENV 1805-1:1998 |
|
CEN EN ISO 3449 |
Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements-(ISO 3449):2005;:2000 |
|
CEN EN ISO 6346 |
Freight Containers - Coding, Identification and Marking (ISO 6346 : 1995) |
|
CEN EN ISO 6682 |
Earth-Moving Machinery - Zones of Comfort and Reach for Controls (ISO 6682 : 1986 Including Amendment 1: 1989) |
|
CEN EN ISO 8849 |
Small craft - Electrically operated direct-current bilge-pumps-ISO 8849:2003; Supersedes EN 28849:1993 |
|
CEN EN ISO/IEC 15416 |
Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Print Quality Test Specification - Linear Symbols-ISO/IEC 15416: 2000; Supersedes EN 1635:1997 |
|
CEN EN ISO/IEC 7811-1 |
Identification Cards - Recording Technique - Part 1:Embossing-ISO/IEC 7811-1:1995 |
|
CEN EN 12053 |
Safety of Industrial Trucks - Test Methods for Measuring Noise Emissions-Incorporating corrigendum July 2002 |
|
CEN EN 12644-1 |
Cranes - Information for Use and Testing - Part 1: Instructions |
|
CEN EN 1492-4 |
Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes |
|
CEN EN 1677-6 |
Components for Slings - Safety - Part 6: Links - Grade 4 |
|
CEN EN 2155(PART 5) |
Test Methods for Transparent Materials for Aircraft Glazing Part 5: Determination of Visible Light Transmission |
|
CEN EN 2377 |
Glass Fibre Reinforced Plastics Test Method Determination of Apparent Interlaminar Shear Strength |
|
CEN EN 2545-1 |
Aerospace Series - Titanium and Titanium Alloy Remelting Stock and Castings - Technical Specification - Part 1: General Requirements |
|
CEN EN 280 |
Mobile elevating work platforms Design calculations Stability criteria Construction Safety Examinations and tests-Includes amendment A1:2004 |
|
CEN EN 286-2 AC |
CORRIGENDUM Simple Unfired Pressure Vessels Designated to Contain Air or Nitrogen - Part 2: Pressure Vessels for Air Braking and Auxiliary Systems for Motor Vehicles and Their Trailers |
|
CEN EN 3380 |
Aerospace Series - Rings, Retaining - Technical Specification |
|
CEN EN 3899 |
Aerospace series - Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH) - Technical specification |
|
CEN EN 474-4 |
Earth-Moving Machinery - Safety - Part 4: Requirements for Backhoe Loaders |
|
CENELEC EN 50083-10 |
Cabled Networks for Television Signals, Sound Signals and Interactive Services Part 10: System Performance for Return Paths |
|
CENELEC EN 50148 |
Electronic Taximeters |
|
CENELEC EN 50174-1 |
Information Technology - Cabling Installation - Part 1: Specification and Quality Assurance |
|
CENELEC EN 50288-3-1 |
Multi-element metallic cables used in analogue and digital communication and control Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables |
|
CENELEC EN 50288-4-1 |
Multi-element metallic cables used in analogue and digital communication and control Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables |
|
CENELEC EN 50288-6-2 |
Multi-element metallic cables used in analogue and digital communication and control Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz Work area and patch cord cables |
|
CENELEC EN 60793-2-50 |
Optical fibres Part 2-50: Product specifications – Sectional specification for class B single-mode fibres-IEC 60793-2-50:2004; Incorporates Corrigendum: July 2004 |
|
CENELEC EN 60852-4 |
Outline Dimensions of Transformers and Inductors for Use in Telecommunication and Electronic Equipment Part 4: Transformers and Inductors Using YUI-2 Laminations-IEC 852-4: 1996 |
|
CENELEC EN 61162-2 |
Maritime Navigation and Radiocommunication Equipment and Systems Digital Interfaces Part 2: Single Talker and Multiple Listeners, High-Speed Transmission-IEC 61162-2:1998 |
|
CENELEC EN 61373 |
Railway Applications - Rolling Stock Equipment - Shock and Vibration Tests-IEC 61373: 1999 |
|
CENELEC EN 61663-2 |
Lightning Protection - Telecommunication Lines Part 2: Lines Using Metallic Conductors-IEC 61663-2: 2001 |
|
CENELEC EN 61754-20 |
Fibre optic connector interfaces Part 20: Type LC connector family-IEC 61754-20: 2002 |
|
CEN EN 618 |
(FAULTY STANDARD) Continuous Handling Equipment and Systems - Safety and EMC Requirements for Equipment for Mechanical Handling of Bulk Materials Except Fixed Belt Conveyors |
|
CENELEC EN 61850-9-1 |
Communication networks and systems in substations Part 9-1: Specific Communication Service Mapping (SCSM) Sampled values over serial unidirectional multidrop point to point link-IEC 61850-9-1:2003 |
|
CEN EN 868-4 |
Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 4: Paper Bags - Requirements and Test Methods |
|
CEN EN ISO 13355 |
Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test-ISO 13355:2001 |
|
CEN EN ISO 283-1 |
Textile Conveyor Belts - Full Thickness Tensile Testing - Part 1: Determination of Tensile Strength, Elongation at Break and Elongation at the Reference Load-ISO 283-1: 2000 |
|
CEN EN ISO 4090 |
Photography - Medical radiographic cassettes/screens/films and hard-copy imaging films - Dimensions and specifications-ISO 4090:2001 |
|
CEN EN ISO 6683 |
Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests-ISO 6683: 2005 |
|
CEN EN ISO 7623 |
Steel Cord Conveyor Belts - Cord-To-Coating Bond Test - Initial Test After Thermal Treatment-ISO 7623: 1996 |
|
CEN CEN ISO/TS 14907-1 |
Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures-ISO/TS 14907-1:2005; Supersedes ENV ISO 14907-1:2000 |
|
CEN CR 14311 |
Packaging - Marking and material identification system |
|
CEN EN 12254 |
Screens for Laser Working Places - Safety Requirements and Testing-Includes Amendment A1:2002 |
|
CEN EN 1492-2 |
Textile Slings - Safety - Part 2: Roundslings, Made of Man-Made Fibres, for General Purpose Use-Incorporating Corrigendum June 2006 |
|
CEN EN 2004-5 |
Aerospace Series - Test Methods for Aluminium and Aluminium Alloy Products - Part 5: Determination of Cladding Thickness and Copper Diffusion of Clad Semi-Finished Products |
|
CEN EN 2066 |
Aerospace Series - Extruded Section in Aluminium Alloys - General Tolerances |
|
CEN EN 2243-5 |
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests |
|
CEN EN 2283 |
Aerospace Series - Testing of Aircraft Wiring |
|
CEN EN 2591-217 |
Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 217: Voltage Drop under Specified Current for Terminal Lugs and In-Line Splices |
|
CEN EN 2694 |
Aerospace Series- Aluminium Alloy AL-P6061 -T6 or T62 - Sheet and Strip 0,4 mm is Less Than or Equal to a is Less Than or Equal to 6 mm |
|
CEN EN 2829 |
Aerospace Series - Adhesion Test for Metallic Coatings by Shot Peening |
|
CEN EN 3475-201 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 201: Visual Examination |
|
CEN EN 3567-004 |
Aerospace Series - In-Line Couplers for Use in Multiplex Data Bus Systems in Accordance with MIL-STD-1553B - Part 004: Double In-Line Couplers - Product Standard |
|
CEN EN 3746 |
Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) Hardness 80 IRHD |
|
CEN EN 4114 |
Aerospace Series - Clamps, Loop ( |
|
CEN EN 474-5 |
Earth-Moving Machinery - Safety - Part 5: Requirements for Hydraulic Excavators |
|
CEN EN 474-6 |
Earth-Moving Machinery - Safety - Part 6: Requirements for Dumpers |
|
CENELEC EN 50065-2-1 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments-Incorporating corrigendum August 2003 |
|
CENELEC EN 50289-1-2 |
Communication Cables - Specifications for Test Methods Part 1-2: Electrical Test Methods - DC Resistance |
|
CENELEC EN 60154-2 |
Flanges for Waveguides Part 2: Relevant Specifications for Flanges for Ordinary Rectangular Waveguides-Supersedes HD 129.2 S2: 1983; Includes Amendment A1: 1997; IEC 60154-2: 1980 + A1: 1997 |
|
CENELEC EN 60512-16-20 |
Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 16: Mechanical Tests on Contacts and Terminations Section 20: Test 16t: Mechanical Strength (Wired Termination of Solderless Connections)-IEC 512-16-20: 1996 |
|
CENELEC EN 60801-2 |
Electromagnetic Compatibility for Industrial-Process Measurement and Control Equipment Part 2: Electrostatic Discharge Requirements (IEC 801-2:1991) |
|
CENELEC EN 60939-2-2 |
Complete filter units for radio interference suppression Part 2-2: Blank detail specification Passive filter units for electromagnetic interference suppression Filters for which safety tests are required (safety tests only)-IEC 60939-2-2:2004; Supersedes EN 133221:1998 |
|
CENELEC EN 61114-1 |
Receiving Antennas for Satellite Broadcast Transmissions in the 11/12 GHz Band - Part 1: Electrical Measurements-IEC 61114-1: 1999 |
|
CENELEC EN 61850-7-1 |
Communication networks and systems in substations Part 7-1: Basic communication structure for substation and feeder equipment - Principles and models-IEC 61850-7-1:2003 |
|
CENELEC EN 62105 |
Digital audio broadcasting system Specification of the receiver data interface (RDI) |
|
CEN EN 741 |
Continuous Handling Equipment and Systems - Safety Requirements for Systems and Their Components for Pneumatic Handling of Bulk Materials |
|
CEN EN 868-5 |
Packaging materials and systems for medical devices which are to be sterilized Part 5: Heat and self-sealable pouches and reels of paper and plastic film construction Requirements and test methods-Incorporating corrigendum October 2001 |
|
CEN EN ISO 10240 |
Small Craft - Owner´s Manual-ISO 10240:2004 |
|
CEN EN ISO 13406-2 |
Ergonomic Requirements for Work with Visual Displays Based on Flat Panels - Part 2: Ergonomic Requirements for Flat Panel Displays-ISO 13406-2: 2001 |
|
CEN EN ISO 15438 |
Information technology Automatic identification and data capture techniques Bar code symbology specifications PDF417-ISO/IEC 15438:2001; Supersedes ENV 12925: 1997 |
|
CEN EN ISO 19115 |
Geographic information - Metadata-ISO 19115:2003 |
|
CEN EN ISO 9241-9 |
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 9: Requirements for Non-Keyboard Input Devices-ISO 9241-9:2000 |
|
CEN EN ISO/IEC 10373 |
Identification Cards - Test Methods (ISO/IEC 10373 : 1993) |
|
CEN ENV 1805-2 |
Data Communication for HVAC Application Management Net - Part 2: System Neutral Data Transmission by Open Communication for Building Automation (FND) |
|
CEN CEN/TR 13695-2 |
Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment-Supersedes CR 13695-2:2002 |
|
CEN CEN/TS 14271 |
Health informatics - File exchange format for vital signs |
|
CEN CEN/TS 14821-8 |
Traffic and Travel Information (TTI) TTI messages via cellular networks Part 8: GSM-specific parameters |
|
CEN CEN/TS 14826 |
Postal services - Automatic identification of items - Two dimensional bar code symbol print quality specification for machine readable Digital Postage Marks |
|
CEN CR 13935 |
Non-Destructive Testing - Generic NDE Data Format Model |
|
CENELEC EN 100114-1 |
Rule of Procedure: Quality Assessment Procedures Part 1: Approval of Manufacturers and Other Organizations |
|
CEN EN 1123-3 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building |
|
CEN EN 1175-3 |
Safety of Industrial Trucks - Electrical Requirements - Part 3: Specific Requirements for the Electric Power Transmission Systems of Internal Combustion Engine Powered Trucks |
|
CEN EN 12080 |
Railway Applications - Axleboxes - Rolling Bearings-Ratified European Text |
|
CEN EN 12081 |
Railway Applications - Axleboxes - Lubricating Greases-Ratified European Text |
|
CEN EN 12082 |
Railway Applications - Axleboxes - Performance Testing |
|
CEN EN 12158-2 |
Builders Hoists for Goods - Part 2: Inclined Hoists with Non-Accessible Load Carrying Devices |
|
CEN EN 12195-2 |
Load Restraint Assemblies on Road Vehicles - Safety - Part 2: Web Lashing Made from Man-Made Fibres |
|
CEN EN 12195-3 |
Load Restraint Assemblies on Road Vehicles - Safety - Part 3: Lashing Chains |
|
CEN EN 12312-12 |
Aircraft Ground Support Equipment - Specific Requirements - Part 12: Potable Water Service Equipment |
|
CEN EN 12312-8 |
Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms |
|
CEN EN 12312-9 |
Aircraft Ground Support Equipment - Specific Requirements - Part 9: Container/Pallet loaders |
|
CEN EN 13021 |
Winter service machines - Safety requirements |
|
CEN EN 13524 |
Highway maintenece machines - Safety requirements |
|
CEN EN 13626 |
Packaging - Box pallets - General requirements and test methods |
|
CEN EN 13628-1 |
Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods |
|
CEN EN 13698-1 |
Pallet production specification - Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets |
|
CEN EN 13776 |
Filling and Discharge Procedures for LPG Road Tankers |
|
CENELEC EN 140400 |
Sectional Specification: Fixed Low Power Surface Mounting (SMD) Resistors |
|
CEN EN 1525 |
Safety of Industrial Trucks - Driverless Trucks and Their Systems |
|
CEN EN 1526 |
Safety of Industrial Trucks - Additional Requirements for Automated Functions on Trucks |
|
CENELEC EN 165000-2 |
Film and Hybrid Integrated Circuits Part 2: Internal Visual Inspection and Special Tests |
|
CEN EN 1757-3 |
Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks |
|
CENELEC EN 187101 |
Family Specification: Optical Telecommunication Cables to Be Used in Ducts or Direct Buried Application |
|
CEN EN 1915-2 |
Aircraft Ground Support Equipment - General Requirements - Part 2: Stability and Strength Requirements, Calculations and Test Methods |
|
CEN EN 2004-1 |
Aerospace Series Test Methods for Aluminium and Aluminium Alloy Products Part 1. Determination of Electrical Conductivity of Wrought Aluminium Alloys |
|
CEN EN 2070-1 |
Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 1: General Requirements |
|
CEN EN 2070-2 |
Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 2: Sheet, Strip Formed Profiles and Plate |
|
CEN EN 2070-3 |
Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 3: Bar and Section |
|
CEN EN 2070-7 |
Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 7: Wrought Forging Stock |
|
CEN EN 2139 |
Washers, Flat Heat Resisting Steel |
|
CEN EN 2329 |
Aerospace Series - Textile Glass Fibre Preimpregnates - Test Method for the Determination of Mass per Unit Area |
|
CEN EN 2353 |
Turnbarrels, Control Cable in Corrosion Resisting Steel Dimensions and Loads |
|
CEN EN 2424 |
Aerospace Series - Marking of Aerospace Products |
|
CEN EN 2429 |
Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 60 IRHD |
|
CEN EN 2558 |
Aerospace Series - Carbon Fibre Preimpregnates - Determination of the Volatile Content |
|
CEN EN 2560 |
Aerospace Series - Carbon Fibre Preimpregnates - Determination of the Resin Flow |
|
CEN EN 2584 |
Aerospace Series - Bearings, Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner - Narrow Series - Elevated Load at Ambient Temperature - Dimensions and Loads |
|
CEN EN 2591-101 |
Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 101: Visual Examination |
|
CEN EN 3381 |
Aerospace Series - Screws, 100 Degrees Countersunk Normal Head, Offset Cruciform Recess, Close Tolerance Normal Shank, Short Thread, in Titanium, Anodized, MoS2 Lubricated - Classification: 1 100 MPa (at Ambient Temperature)/315 Degrees C |
|
CEN EN 3475-305 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 305: Overload Resistance |
|
CEN EN 3475-409 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 409: Air-Excluded Ageing |
|
CEN EN 3475-704 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 704: Flexibility |
|
CEN EN 3475-808 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 808: Cross-Talk |
|
CEN EN 3548 |
Aluminium Alloy AL-C21002 T7 Sand Castings |
|
CENELEC EN 50122-1 |
Railway Applications - Fixed Installations Part 1: Protective Provisions Relating to Electrical Safety and Earthing |
|
CENELEC EN 50288-3-2 |
Multi-element metallic cables used in analogue and digital communication and control Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables |
|
CENELEC EN 50357 |
Evaluation of Human Exposure to Electromagnetic Fields from Devices Used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and Similar Applications |
|
CENELEC EN 50384 |
Product Standard to Demonstrate the Compliance of Radio Base Stations and Fixed Terminal Stations for Wireless Telecommunication Systems with the Basic Restrictions or the Reference Levels Related to Human Exposure to Radio Frequency Electromagnetic Fields (110 MHz - 40 GHz) - Occupational |
|
CENELEC EN 55016-2-2 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 2-2: Methods of measurement of disturbances and immunity – Measurement of disturbance power-CISPR 16-2-2:2003; Including amendments A1:2005 and A2:2005 |
|
CENELEC EN 55016-2-3 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
|
CENELEC EN 55016-2-4 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 2-4: Methods of measurement of disturbances and immunity Immunity measurements-CISPR 16-2-4:2003 |
|
CENELEC EN 60062 |
Marking codes for resistors and capacitors-IEC 60062:2004, Modified |
|
CENELEC EN 60068-2-21 |
Environmental Testing - Part 2-21: Tests - Test U: Robustness of Terminations and Integral Mounting Devices-IEC 60068-2-21:2006 |
|
CENELEC EN 60107-1 |
Methods of Measurement on Receivers for Television Broadcast Transmissions; Part 1: General Considerations; Measurements at Radio and Video Frequencies-IEC 60107-1:1997 |
|
CENELEC EN 60130-9 |
Connectors for Frequencies Below 3 MHz Part 9: Circular Connectors for Radio and Associated Sound Equipment-IEC 60130-9: 2000 |
|
CENELEC EN 60154-1 |
Flanges for Waveguides Part 1: General Requirements (Includes Amendment A1) (IEC 154-1 : 1982 + A1 : 1993) |
|
CENELEC EN 60249-1+ A4 |
Base Materials for Printed Circuits Part 1. Test Methods (IEC 249-1 : 1982 + A1 : 1984 + A2 : 1989 + A3 : 1991 + A4:1993)(Incorporates Corrigendum May 1994) |
|
CENELEC EN 60335-2-56 |
Household and similar electrical appliances - Safety Part 2-56: Particular requirements for projectors and similar appliances-IEC 60335-2-56: 2002 |
|
CENELEC EN 60512-1-4 |
Electromechanical Components for Electronic Equipment Basic Testing Procedures and Measuring Methods - Part 1: General - Section 4: Test 1d: Contact Protection Effectiveness (Scoop-Proof)-IEC 60512-1-4: 1997 |
|
CENELEC EN 60555-3/A1 |
Text of Corrigendum-Ratified European Text; Corrigendum December, 1997 |
|
CENELEC EN 60603-7-4 |
Connectors for electronic equipment Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz-IEC 60603-7-4:2005 |
|
CENELEC EN 60749-7 |
Semiconductor Devices - Mechanical and Climatic Test Methods Part 7: Internal Moisture Content Measurement and the Analysis of Other Residual Gases-Partly Supersedes EN 60749: 1999 + A1: 2000 + A2: 2001 |
|
CENELEC EN 60749-8 |
Semiconductor devices - Mechanical and climatic test methods Part 8: Sealing-IEC 60749-8: 2002 + corrigendum: 2003 |
|
CENELEC EN 60793-2-10 |
Optical fibres Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres-IEC 60793-2-10:2004 |
|
CENELEC EN 60831-1 |
Shunt power capacitors of the self-healing type for a.c. system shaving a rated voltage up to and including 1 kV Part 1: General Performance, testing and rating Safety requirements Guide for installation and operation-Includes Amendment A1:2003; IEC 831-1:1996 + A1:2002 |
|
CENELEC EN 60831-2 |
Shunt Power Capacitors of the Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 kV Part 2: Ageing Test, Self-Healing Test and Destruction Test (IEC 831-2 : 1995) |
|
CENELEC EN 60870-5-101 |
Telecontrol Equipment and Systems - Part 5-101: Transmission Protocols - Companion Standard for Basic Telecontrol Tasks-IEC 60870-5-101:2003 |
|
CENELEC EN 60872-3 |
Maritime Navigation and Radiocommunication Equipment and Systems - Radar Plotting Aids Part 3: Electronic Plotting Aid (EPA) - Performance Requirements - Methods of Testing and Required Test Results-IEC 60872-3:2000 |
|
CENELEC EN 60917-2-1 |
Modular Order for the Development of Mechanical Structures for Electronic Equipment Practices Part 2: Sectional Specification Interface Co-Ordination Dimensions for the 25 mm Equipment Practice Section 1: Detail Specification - Dimensions for Cabinets and Racks-IEC 917-2-1: 1993 |
|
CENELEC EN 61108-4 |
Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment Performance requirements, methods of testing and required test results-IEC 61108-4:2004 |
|
CENELEC EN 61162-400 |
Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces Part 400: Multiple Talkers and Multiple Listeners - Ship Systems Interconnection - Introduction and General Principles-IEC 61162-400: 2001 |
|
CENELEC EN 61169-1 |
Radio-Frequency Connectors - Part 1: Generic Specification - General Requirements and Measuring Methods-Includes Amendment A1: 1996 and A2: 1997; IEC 1169-1: 1992 + A1: 1996 + A2: 1997 |
|
CENELEC EN 61188-5-2 |
Printed boards and printed board assemblies Design and use Part 5-2: Attachment (land/joint) considerations Discrete components-IEC 61188-5-2:2003 |
|
CENELEC EN 61196-3-3 |
Radio Frequency Cables Part 3-3: Coaxial Cables for Digital Communication in Horizontal Floor Wiring Detail Specification for Coaxial Cables with Foamed Dielectric for Local Area Networks of 185 m Reach and up to 10 Mb/s-IEC 61196-3-3: 1997 |
|
CENELEC EN 61242 |
Electrical accessories Cable reels for household and similar purposes-IEC 1242:1995, Modified; Including Amendment A11: January, 2004; Including Amendment A12: March, 2006 |
|
CENELEC EN 61360-2 |
Standard data element types with associated classification scheme for electric components Part 2: EXPRESS dictionary schema-Includes Amendment A1:2004; IEC 61360-2: 2002 + A1: 2003 |
|
CENELEC EN 61850-7-4 |
Communication networks and systems in substations Part 7-4: Basic communication structure for substation and feeder equipment Compatible logical node classes and data classes-IEC 61850-7-4:2003 |
|
CENELEC EN 61967-4 |
Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 4: Measurement of conducted emissions - 1 ohm/150 ohm direct coupling method-Includes Amendment A1:2006; IEC 61967-4:2002 |
|
CENELEC EN 62018 |
Power consumption of information technology equipment Measurement methods-IEC 62018:2003 |
|
CEN EN 62252 |
Maritime navigation and radiocommunication equipment and systems Radar for craft not in compliance with IMO SOLAS Chapter V Performance requirements, methods of test and required test results-IEC 62252:2004 |
|
CEN EN 818-4 |
Short Link Chain for Lifting Purposes - Safety - Part 4: Chain Slings - Grade 8 |
|
CEN EN 868-10 |
Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 10: Adhesive Coated Nonwoven Materials of Polyolefines for Use in the Manufacture of Heat Sealable Pouches, Reels and Lids - Requirements and Test Methods |
|
CEN EN 868-3 |
Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 3: Paper for Use in the Manufacture of Paper Bags (Specified in EN 864-4) and in the Manufacture of Pouches and Reels (Specified in EN 868-5) - Requirements and Test Methods |
|
CEN EN 868-6 |
Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 6: Paper for the Manufacture of Packs for Medical Use for Sterilization by Ethylene Oxide or Irradiation - Requirements and Test Methods |
|
CEN EN 868-6 |
Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 6: Paper for the Manufacture of Packs for Medical Use for Sterilization by Ethylene Oxide or Irradiation - Requirements and Test Methods-Ratified European Text |
|
CEN EN 868-9 |
Packaging Materials and Systems for Medical Devices Which Are to Be Sterilized - Part 9: Uncoated Nonwoven Materials of Polyolefines for Use in the Manufacture of Heat Sealable Pouches, Reels and Lids - Requirements and Test Methods |
|
CEN EN ISO 10133 |
Small Craft - Electrical Systems - Extra-Low-Voltage D.C. Installations-ISO 10133: 2000 |
|
CEN EN ISO 10374 |
Freight Containers - Automatic Identification-ISO 10374: 1991, Including Amendment 1: 1995 |
|
CEN EN ISO 11146-2 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams-ISO 11146-2:2005 |
|
CEN EN ISO 11674 |
Ships and Marine Technology - Heading Control Systems-ISO 11674:2000 |
|
CEN EN ISO 15749-2 |
Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity system-ISO 15749-2:2004 |
|
CEN EN ISO 16091 |
Space systems Integrated logistic support-ISO 16091:2002 |
|
CEN EN ISO 19113 |
Geographic information - Quality principles-ISO 19113:2002 |
|
CEN EN ISO 8311 |
Refrigerated Light Hydrocarbon Fluids - Calibration of Membrane Tanks and Independent Prismatic Tanks in Ships - Physical Measurement (ISO 8311 : 1989) |
|
CEN EN ISO 9875 |
Ships and Marine Technology - Marine Echo-Sounding Equipment-ISO 9875:2000; Incorporating Technical Corrigendum February 2006 |
|
CEN ENV 12925 |
Bar Coding - Symbology Specifications - `PDF417´-Superseded by EN ISO 15438: 2003 |
|
CEN ENV 1805-2 |
Data Communication for HVAC Application Management Net - Part 2: System Neutral Data Transmission by Open Communication for Building Automation (FND) |
|
CENELEC HD 370 S2 |
Modular Plug-in Unit and Standard 19-Inch Rack Amounting Unit Based on NIM Standard (for Electronic Nuclear Instruments) |
|
CENELEC HD 482 S1 |
Radiation Safety of Laser Products, Equipment, Classification, Requirements, and Users Guide |
|
CENELEC HD 576 S1 |
Parallel Sub-System Bus of the IEC 821 VME Bus |
|
CEN CEN ISO/TS 17262 |
Automatic vehicle and equipment identification Intermodal goods transport Numbering and data structures-ISO/TS 17262: 2003 |
|
CEN CEN/TR 14699 |
Office furniture - Terminology |
|
CEN EN 1038 |
Identification Card Systems - Telecommunication Applications - Integrated Circuit(s) Card Payphone |
|
CENELEC EN 120001 |
Blank Detail Specification: Light Emitting Diodes, Light Emitting Diode Arrays, Light Emitting Diode Displays Without Internal Logic and Resistor |
|
CEN EN 12052 |
Health informatics - Digital imaging - Communication, workflow and data management-Supersedes: ENV 12052:1997, ENV 12623:1997, ENV 12922-1:1997, ENV 13939:2001 |
|
CEN EN 12081 |
Railway Applications - Axleboxes - Lubricating Greases |
|
CEN EN 12312-19 |
Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions |
|
CENELEC EN 130300 |
Sectional Specification: Aluminium Electrolytic Capacitors with Solid and Non-Solid Electrolyte-Supersedes CECC 30 300: 1988 and Its Amendments |
|
CEN EN 13135-2 |
Cranes - Equipment - Part 2: Non-electrotechnical equipment |
|
CEN EN 13298 |
Railway applications Suspension components Helical suspension springs, steel |
|
CEN EN 13490 |
Mechanical Vibration - Industrial Trucks - Laboratory Evaluation and Specification of Operator Seat Vibration |
|
CEN EN 13876 |
Transport - Logistics and Services - Goods transport chains - Code of practice for the provision of cargo transport services |
|
CEN EN 14089 |
Space Product Assurance - The Control of Limited Shelf-Life Materials |
|
CEN EN 1570 |
Safety Requirements for Lifting Tables-Including Amendment A1:2004 |
|
CEN EN 1757-4 |
Safety of industrial trucks Pedestrian propelled trucks Part 4: Scissor lift pallet-trucks |
|
CENELEC EN 186170 |
Sectional Specification: Connector Sets for Optical Fibres and Cables - Type RCC |
|
CEN EN 1915-3 |
Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction |
|
CEN EN 2032-2 |
Aerospace Series Metallic Materials Part 2: Coding of Metallurgical Condition in Delivery Condition |
|
CEN EN 2070-1 PRA1 |
AMD PRA1 Aerospace Series Aluminium and Aluminium Alloy Wrought Products - Technical Specification Part 1 - General Requirements |
|
CEN EN 2070-4 |
Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 4: Tube for Structures |
|
CEN EN 2070-5 |
Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 5: Tube Used Under Pressure |
|
CEN EN 2070-6 |
Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 6: Rivet Wire |
|
CEN EN 2076 PART 1 |
Aerospace Series Aluminium and Magnesium Alloy Ingots and Castings Technical Specification Part 1: General Requirements |
|
CEN EN 2138 |
Aerospace Series - Washers, Flat, in Steel, Cadmium Plated |
|
CEN EN 2155-2 |
Aerospace Series Test Methods for Transparent Materials for Aircraft Glazing Part 2: Determination of Water Absorption |
|
CEN EN 22248 |
Packaging - Complete, Filled Transport Packages - Vertical Impact Test by Dropping (ISO 2248: 1985) |
|
CEN EN 2243-3 |
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core |
|
CEN EN 2334 |
Aerospace Series - Chromic-Sulphuric Acid Pickle of Aluminium and Aluminium Alloys |
|
CEN EN 2365 |
Collars, Aluminium Alloy |
|
CEN EN 2384 |
Aluminium Alloy AL-P2014A T6511 Extruded Bars and Sections a or D Less Than or Equal to 150 mm |
|
CEN EN 2516 |
Aerospace Series - Passivation of Corrosion Resisting Steels and Decontamination of Nickel Base Alloys |
|
CEN EN 2591-413 |
Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 413: Holding Force of Grounding Spring System |
|
CEN EN 283 |
Swap Bodies - Testing |
|
CEN EN 2851 |
Marking of Parts and Assemblies Other Than Engines - Indications on Drawings |
|
CEN EN 29519 |
Shipbuilding and Marine Structures - Rungs for Dog-Step Ladders (ISO 9519 : 1990) |
|
CEN EN 3290 |
Bearings, Airframe Rolling - Single Row Self-Aligning Roller Bearing in Steel - Diameter Series 3 and 4 - Dimensions and Loads |
|
CEN EN 3303 |
Aerospace Series - Screws, Cap Head, Hexagon Socket, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated - Classification : 1 100 MPa (at Ambient Temperature)/235 Degrees C |
|
CEN EN 3475-100 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 100: General |
|
CEN EN 3475-401 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 401: Accelerated Ageing |
|
CEN EN 3475-701 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 701: Strippability and Adherence of Insulation to the Conductor |
|
CEN EN 3506 |
Aerospace Series - Hot Rolled Sheets and Plates in Heat Resisting Alloys - Thickness 2,0 mm Less Than or Equal to A Less Than or Equal to 100 mm - Dimensions |
|
CEN EN 3745-201 |
Aerospace Series - Fibres and Cables, Optical, Aircraft Use - Test Methods - Part 201: Visual Examination |
|
CEN EN 3841-201 |
Aerospace series - Circuit breakers - Test methods - Part 201: Visual inspection |
|
CEN EN 452 |
Swap Bodies - Swap Bodies of Class A - Dimensions and General Requirements |
|
CENELEC EN 50090-2-1 |
Communication cables Part 2-1: Common design rules and construction |
|
CENELEC EN 50094 |
Access Control System for the MAC/Packet Family: EUROCRYPT-Includes Amendment A1: 1995 |
|
CENELEC EN 50122-2 |
Railway Applications - Fixed Installations - Part 2: Protective Provisions Against the Effects of Stray Currents Caused by d.c. Traction Systems-Includes Amendment A1: 2002; Incorporating Corrigendum August 2001 |
|
CEN EN 50132-2-1 |
Alarm Systems - CCTV Surveillance Systems for Use in Security Applications Part 2-1: Black and White Cameras |
|
CENELEC EN 50132-2-1 |
Alarm Systems - CCTV Surveillance Systems for Use in Security Applications Part 2-1: Black and White Cameras |
|
CENELEC EN 50159-2 |
Railway Applications - Communication, Signalling and Processing Systems - Part 2: Safety Related Communication in Open Transmission Systems |
|
CENELEC EN 50239 |
Railway Applications - Radio Remote Control System of Traction Vehicle for Freight Traffic |
|
CENELEC EN 50288-4-2 |
Multi-element metallic cables used in analogue and digital communication and control Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables |
|
CENELEC EN 50288-5-2 |
Multi-element metallic cables used in analogue and digital communication and control Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables |
|
CENELEC EN 50290-2-25 |
Communication Cables - Part 2-25: Common Design Rules and Construction - Polypropylene Insulation Compounds-Supersedes HD 624.5 S1:1995 |
|
CENELEC EN 50290-2-26 |
Communication Cables Part 2-26: Common Design Rules and Construction - Halogen Free Flame Retardant Insulation Compounds-Supersedes HD 624.6 S1: 1995 |
|
CENELEC EN 50325-3 |
Industrial Communications Subsystem Based on ISO 11898 (CAN) for Controller-Device Interfaces - Part 3: Smart Distributed System (SDS) |
|
CENELEC EN 60118-13 |
Electroacoustics – Hearing aids Part 13: Electromagnetic compatibility (EMC)-IEC 60118-13: 1997 |
|
CENELEC EN 60512-1-1 |
Connectors for Electronic Equipment - Tests and Measurements Part 1-1: General Examination - Test 1a: Visual Examination-IEC 60512-1-1:2002 |
|
CENELEC EN 60512-11-14 |
Connectors for electronic equipment Tests and measurements Part 11-14: Climatic tests Test 11p: Flowing single gas corrosion test-IEC 512-11-14:2003 |
|
CENELEC EN 60512-11-14 |
Electromechanical Components for Electronic Equipment; Basic Testing Procedures and Measuring Methods; Part 11: Climatic Tests; Section 14: Test 11p - Flowing Single Gas Corrosion Test-IEC 512-11-14: 1996 |
|
CENELEC EN 60539-2 |
Directly heated negative temperature coefficient thermistors Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors-IEC 60539-2:2003 |
|
CEN EN 606 |
Bar coding - Transport and handling labels for steel products |
|
CENELEC EN 60749-3 |
Semiconductor Devices Mechanical and Climatic Test Methods Part 3: External Visual Examination-IEC 60749-3: 2002; Partly Supersedes EN 60749: 1999 + A1: 2000 + A2: 2001 |
|
CENELEC EN 60793-2 |
Optical fibres Part 2: Product specifications - General-IEC 60793-2:2003 |
|
CENELEC EN 60870-5-1 |
Telecontrol Equipment and Systems Part 5: Transmission Protocols Section One: Transmission Frame Formats (IEC 870-5-1 : 1990) |
|
CENELEC EN 60870-6-802 |
Telecontrol equipment and systems Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models-Incorporates Amendment A1: April 2005 |
|
CENELEC EN 60872-1 |
Maritime Navigation and Radiocommunication Equipment and Systems Radar Plotting Aids Part 1: Automatic Radar Plotting Aids (ARPA) Methods of Testing and Required Test Results-IEC 60872-1:1998; Supersedes EN 60872:1993 + A1:1993 |
|
CENELEC EN 60939-2-1 |
Complete filter units for radio interference suppression Part 2-1: Blank detail specification Passive filter units for electromagnetic interference suppression Filters for which safety tests are required (assessment level D/DZ)-IEC 60939-2-1:2004; Supersedes EN 133201:1998 |
|
CENELEC EN 61000-4-23 |
Electromagnetic Compatibility (EMC) Part 4-23: Testing and Measurement Techniques - Test Methods for Protective Devices for HEMP and Other Radiated Disturbances-IEC 61000-4-23: 2000 |
|
CENELEC EN 61007 |
Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Measuring Methods and Test Procedures-IEC 1007: 1994, Modified |
|
CENELEC EN 61049 |
Capacitors for Use in Tubular Fluorescent and Other Discharge Lamp Circuits Performance Requirements (IEC 1049 : 1991 + Corrigendum 1992, Modified) |
|
CENELEC EN 61249-8-8 |
Materials for Interconnection Structures Part 8: Sectional Specification Set for Non-Conductive Films and Coatings Section 8: Temporary Polymer Coatings-IEC 61249-8-8: 1997 |
|
CENELEC EN 61290-2-1 |
Optical Fibre Amplifiers - Basic Specification Part 2-1: Test Methods for Optical Power Parameters Optical Spectrum Analyzer-IEC 61290-2-1: 1998 |
|
CENELEC EN 61360-5 |
Standard data element types with associated classification scheme for electric components Part 5: Extensions to the EXPRESS dictionary schema-IEC 61360-5:2004 |
|
CENELEC EN 61754-18 |
Fiber Optic Connector Interfaces Part 18: Type MT-RJ Connector Family-IEC 61754-18: 2001 |
|
CENELEC EN 61921 |
Power capacitors Low-voltage power factor correction banks-IEC 61921:2003 |
|
CENELEC EN 61967-5 |
Integrated circuits Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 5: Measurement of conducted emissions Workbench Faraday Cage method-IEC 61967-5:2003 |
|
CENELEC EN 61967-6 |
Integrated circuits Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 6: Measurement of conducted emissions Magnetic probe method-IEC 61967-6: 2002 |
|
CENELEC EN 62041 |
Power transformers, power supply units, reactors and similar products EMC requirements-IEC 62041: 2003 |
|
CENELEC EN 62216-1 |
Digital terrestrial television receivers for the DVB-T system Part 1: Baseline receiver specification-IEC 62216-1: 2001 |
|
CENELEC EN 62326-1 |
Printed Boards Part 1: Generic Specification-IEC 62326-1: 2002 |
|
CEN EN 818-7 |
Short Link Chain for Lifting Purposes - Safety - Part 7: Fine Tolerance Hoist Chain, Grade T (Types T, DAT, and DT) |
|
CEN EN ISO 10239 |
Small Craft - Liquefied Petroleum Gas (LPG) Systems-ISO 10239: 2000 |
|
CEN EN ISO 13929 |
Small Craft - Steering Gear - Geared Link Systems-ISO 13929:2001 |
|
CEN EN ISO 15364 |
Ships and Marine Technology - Pressure/Vacuum Valves for Cargo Tanks-ISO 15364:2000 |
|
CEN EN ISO 16484-2 |
Building automation and control systems (BACS) Part 2: Hardware-ISO 16484-2:2004 |
|
CEN EN ISO 16484-3 |
Building automation and control systems (BACS) - Part 3: Functions-ISO 16484-3:2005 |
|
CEN EN ISO 2233 |
Packaging - Complete, Filled Transport Packages and Unit Loads - Conditioning for Testing-ISO 2233: 2000 |
|
CEN EN ISO 2244 |
Packaging Complete, filled transport packages and unit loads Horizontal impact tests-ISO 2244: 2000; Supersedes EN 22244:1992 |
|
CEN EN ISO 583-1 |
Conveyor Belts with a Textile Carcass - Total Thickness and Thickness of Elements - Part 1: Methods of Test-ISO 583-1:1999 |
|
CEN EN ISO 7459 |
Glass containers - Thermal shock resistance and thermal shock endurance - Test methods-ISO/FDIS 7459:2004 |
|
CEN EN ISO 9097 |
Small Craft - Electric Fans-Includes Amendment A1:2000; ISO 9097:1991 |
|
CEN EN ISO/IEC 7811-5 |
Identification Cards - Recording Technique - Part 5: Location of Read-Write Magnetic Track - Track 3-ISO/IEC 7811-5: 1995 |
|
CENELEC HD 129.1 S2 |
Flanges for Waveguides - Part 1: General Requirements |
|
CENELEC HD 494 S3 |
Lamps for Road Vehicles - Dimensional, Electrical and Luminous Requirements; (IEC 809:1985 + A1:1987 + A2:1989) |
|
CENELEC HD 624.6 S1 |
Materials Used in Communication Cables Part 6: Halogen Free Flame Retardant Insulation Compounds-Superseded by EN 50290-2-26:2002 |
|
CEN CEN ISO/TS 17263 |
Automatic vehicle and equipment identification Intermodal goods transport System parameters-ISO/TS 17263: 2003 |
|
CEN EN 1052-3:200/PRA1 |
Methods of test for masonry - Part 3: Determination of initial shear strength |
|
CENELEC EN 122200 |
Sectional Specification: Radio Frequency Coaxial Connectors. Series TNC |
|
CEN EN 12251 |
Health informatics - Secure User Identification for Health Care - Management and Security of Authentication by Passwords |
|
CEN EN 12312-11 |
Aircraft Ground Support Equipment - Specific Requirements - Part 11: Container/Pallet Dollies and Loose Load Trailers |
|
CEN EN 12312-17 |
Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment |
|
CEN EN 12312-6 |
Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment |
|
CEN EN 12642 |
Securing of Cargo on Road Vehicles - Body Structure of Commercial Vehicles - Minimum Requirements |