|
CEN EN 13104 |
Railway Applications - Wheelsets and Bogies - Powered Axles - Design Method |
|
CEN EN 13173 |
Cathodic Protection for Steel Offshore Floating Structures |
|
CENELEC EN 132421 |
Blank Detail Specification: Fixed Capacitors for Electromagnetic Interference Suppression Capacitors for Which Safety Tests are Required (Safety Tests Only)-Partially superseded by EN 60384-14-2:2004 and EN 60384-14-3:2004 |
|
CEN EN 1332-2 |
Identification Card Systems - Man-Machine Interface - Part 2: Dimensions and Location of a Tactile Identifier for ID-1 Cards |
|
CEN EN 1332-4 |
Identification Card Systems - Man-Machine Interface - Part 4: Coding of User Requirements for People with Special Needs |
|
CEN EN 13427 |
Packaging - Requirements for the Use of European Standards in the Field of Packaging and Packaging Waste |
|
CEN EN 13428 |
Packaging - Requirements Specific to Manufacturing and Composition - Prevention by Source Reduction |
|
CEN EN 13447 |
Electrically Propelled Road Vehicles - Terminology |
|
CEN EN 13586 |
Cranes - Access |
|
CENELEC EN 137101 |
Blank Detail Specification: Fixed Aluminium Electrolytic a.c. Capacitors with Non-Solid Electrolyte for Motor Starter Applications Qualifications Approval |
|
CEN EN 13802 |
Railway applications - Suspension components - Hydraulic dampers |
|
CEN EN 14010 |
Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
|
CEN EN 14053 |
Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction |
|
CEN EN 14096-1 |
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control |
|
CEN EN 14334 |
Inspection and testing of LPG road tankers |
|
CEN EN 14485 |
Health informatics - Guidance for handling personal health data in international applications in the context of the EU data protection directive |
|
CEN EN 1556 |
Bar Coding - Terminology |
|
CENELEC EN 175301-803 |
Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable |
|
CENELEC EN 186310 |
Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Connector Sets for Optical Fibres and Cables - Type MF-) |
|
CEN EN 1987-1 |
Electrically Propelled Road Vehicles - Specific Requirements for Safety - Part 1: On Board Energy Storage |
|
CEN EN 2068 |
Aerospace Series - Rod Ends with Self- Lubricating Self- Aligning Bearings - Technical Specification |
|
CEN EN 2076-1 |
Aerospace Series Aluminium and Magnesium Alloy Ingots and Castings Technical Specification Part 1: General Requirements |
|
CEN EN 2076-1 PRA1 |
AMD prA1 Aerospace Series Aluminium and Magnesium Alloy Ingots and Castings - Technical Specification - Part 1 - General Requirements |
|
CEN EN 2076-3 |
Aerospace Series Aluminium and Magnesium Alloy Ingots and Castings Technical Specifications Part 3: Re - Production and Production Castings |
|
CEN EN 2082-3 |
Aerospace Series Aluminium Alloy Forging Stock and Forgings Technical Specification Part 3: Pre-Production and Production Forgings |
|
CEN EN 2088 |
Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Clad sheet and strip - 0,4 mm less than or equal to a less than or equal to 6 mm |
|
CEN EN 2284 |
Sulphuric Acid Anodizing of Aluminium and Wrought Aluminium Alloys |
|
CEN EN 2330 |
Aerospace Series - Textile Glass Fibre Preimpregnates - Test Method for the Determination of the Content of Volatile Matter |
|
CEN EN 2331 |
Aerospace Series - Textile Glass Fibre Preimpregnates - Test Method for the Determination of the Resin and Fibre Content and Mass of Fibre per Unit Area |
|
CEN EN 2332 |
Aerospace Series - Textile Glass Fibre Preimpregnates - Test Method for the Determination of the Resin Flow |
|
CEN EN 2367 |
Split Pins in Steel EN 2573 |
|
CEN EN 2378 |
Aerospace Series - Fibre Reinforced Plastics - Determination of Water Absorption by Immersion |
|
CEN EN 2395 |
Aerospace series Aluminium alloy AL-P2014A-T4 or T42 Sheet and strip 0,4 mm Less Than or Equal to a Less Than or Equal to 6 mm |
|
CEN EN 2437 |
Aerospace Series - Chromate Conversion Coatings (Yellow) for Aluminium and Aluminium Alloys |
|
CEN EN 24565 |
Shipbuilding, Yachting, Ships, Ship Anchors, Chains, Specifications, Mechanical Properties, Breaking Load, Dimensions, Marking |
|
CEN EN 2498 |
Rod Ends, Adjustable Self-Aligning Plain Bearing with Self- Lubricating Lines and Threaded Shank Dimensions and Loads |
|
CEN EN 2544 |
Representation of Rivets on Drawings for Aerospace Equipment |
|
CEN EN 2555 |
Aerospace Series - Rivets, Solid, 100 Degrees Normal Countersunk Head with Dome, in Aluminium Alloy 5056A, Inch Based Series |
|
CEN EN 2559 |
Aerospace Series - Carbon Fibre Preimpregnates - Determination of the Resin and Fibre Content and the Mass of Fibre Per Unit Area |
|
CEN EN 2591-313 |
Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 313: Artificial Rain |
|
CEN EN 2591-509 |
Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 509: Adhesion of Coating on Contacts |
|
CEN EN 2650 |
Aerospace Series - Screws, Pan Head, Slotted, Threaded to Head, in Corrosion Resisting Steel, Passivated - Classification: 600 MPa (at Ambient Temperature)/425 Degrees C |
|
CEN EN 2794-001 |
Aerospace Series - Circuit Breakers, Single-Pole, Temperature Compensated, Rated Currents 20 A to 50 A - Part 001: Technical Specification |
|
CEN EN 284 |
Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements |
|
CEN EN 2870 |
Aerospace Series - Bolts, Normal Bihexagonal Head, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1100 MPa (at Ambient Temperature) /315 Degrees C |
|
CEN EN 28877 |
Information Technology - Telecommunications and Information Exchange Between Systems - Interface Connector and Contact Assignments for ISDN Basic Access Interface Located at Reference Points S and T (ISO/IEC 8877 : 1992) |
|
CEN EN 2939 |
Aerospace Series Screws, 100 Degree Countersunk Head, Offset Cruciform Recess, Threaded to Head, in Heat Resisting Steel FE-PA92HT (A286) Classification: 900 MPa (at Ambient Temperature)/650 Degrees C |
|
CEN EN 2940 |
Aerospace Series - Screws, 100 Degree Countersunk Head, Offset Cruciform Recess, Threaded to Head, in Heat Resisting Steel FE-PA92HT (A286), Silver Plated - Classification: 900 MPa (at Ambient Temperature)/650 Degrees C |
|
CEN EN 3009 |
Aerospace Series - Bolts, Hexagon Head, Relieved Shank, Long Thread, in Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718), Silver Plated - Classification: 1 275 MPa (At Ambient Temperature)/650 Degrees Clesius |
|
CEN EN 3044 |
Aerospace Series - Installation Holes for Inserts, Screw Thread, Helical Coil, Self-Locking - Design Standard |
|
CEN EN 3112 |
Aerospace Series - Bolts, Normal Hexagonal Head, Threaded to Head, in Alloy Steel, Cadmium Plated - Classification: 900 MPa (at Ambient Temperature)/235 Degrees C |
|
CEN EN 3140 |
Aerospace Series - Rivets, Solid, 100 Degree Countersunk Normal Head, in Corrosion Resisting Steel FE-PA2601, Passivated, Inch Based Series |
|
CEN EN 3196 |
Aerospace Series Nuts, Hexagonal, Self-Locking, in Heat Resisting Steel FE-PA92HT (A286), Silver Plated Classification: 1100 MPa (at Ambient Temperature)/425 Degrees Celsius |
|
CEN EN 3202 |
Aerospace Series - Holes and Traps for T-Head Bolts - Design Standard |
|
CEN EN 3268 |
Aerospace Series - Pipe Coupling 8 Degrees 30´ in Titanium Alloy - Pressure Plug |
|
CEN EN 3304 |
Aerospace Series - Screws, 100 Degree Countersunk Reduced Head, Offset Cruciform Recess, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1 100 MPa (at Ambient Temperature)/315 Degrees C |
|
CEN EN 3475-202 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 202: Mass |
|
CEN EN 3475-402 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 402: Shrinkage and Delamination |
|
CEN EN 3475-404 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 404: Thermal Shock |
|
CEN EN 3475-405 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 405: Bending at Ambient Temperature |
|
CEN EN 3475-407 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 407: Flammability |
|
CEN EN 3475-501 |
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through |
|
CEN EN 3475-504 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 504: Torsion |
|
CEN EN 3475-505 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 505: Tensile Test on Conductors and Strands |
|
CEN EN 3475-506 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 506: Plating Continuity |
|
CEN EN 3475-703 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 703: Permanence of Manufacturer´s Marking |
|
CEN EN 3475-705 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 705: Contrast Measurement |
|
CEN EN 3475-802 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 802: Capacitance Unbalanced |
|
CEN EN 3475-807 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 807: Transfer Impedance |
|
CEN EN 3541 |
Rod Ends, Adjustable, Self-Aligning Ball Bearing with Threaded Shank - Dimensions, Torques, Clearances and Loads |
|
CEN EN 3611 |
Aerospace Series - Spigots - Dimensions and Fit Selection - Design Standard |
|
CEN EN 3730 |
Aerospace Series - Clamps, Saddle Fixed and Sliding Version in Aluminium Alloy with Rubber Cushioning - Dimensions, Masses |
|
CEN EN 3841-100 |
Aerospace series - Circuit breakers - Test methods - Part 100: General |
|
CEN EN 3841-308 |
Aerospace series - Circuit breakers - Test methods - Part 308: Lightning |
|
CEN EN 3842 |
Aerospace Series - Circular Tubes for Fluids in Corrosion Resistant Steel - Diameter 3,2 mm Less Than or Equal to D Less Than or Equal to 100 mm - Thickness 0,32 mm Less Than or Equal to a Less Than or Equal to 2,5 mm - Dimensions |
|
CEN EN 3907 |
Aerospace series - Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Classification: 1 100 MPa (at ambient temperature) / 350 degrees C |
|
CEN EN 3920 |
Aerospace series - Nickel base alloy NI - B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing - Powder or paste |
|
CEN EN 4032 |
Aerospace Series - Pipe Coupling 8 Degrees 30´ in Titanium Alloy - Thrust Wire |
|
CEN EN 4258 |
Aerospace Series - Metallic Materials - General Organization of Standardization - Links between Types of EN Standards and Their Use |
|
CEN EN 4550-1 |
Aerospace series - Pipe coupling, 37 degree - Design configuration - Inch series - Part 1: Male sealing ends, spherical |
|
CENELEC EN 50065-4-5 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-5: Low voltage decoupling filter - Segmentation filter |
|
CENELEC EN 50065-4-7 |
Signalling on lowvoltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz - Part 4-7: Portable low voltage decoupling filters - Safety requirements |
|
CENELEC EN 50065-7 |
Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 148,5 kHz - Part 7: Equipment Impedance |
|
CENELEC EN 50132-5 |
Alarm Systems - CCTV Surveillance Systems for Use in Security Applications Part 5: Video Transmission |
|
CENELEC EN 50132-7 |
Alarm Systems - CCTV Surveillance Systems for Use in Security Applications Part 7: Application Guidelines |
|
CENELEC EN 50170/A3 |
AMD 3 General Purpose Field Communication System-Ratified European Text; Partially superseded by EN 61784-1:2004; Partially superseded by EN 61158-2:2004; Partially superseded by EN 61158-3:2004; Partially superseded by EN 61158-5:2004; Partially superseded by EN 61158-4:2004; Partially superseded by EN 61158-6:2004 |
|
CENELEC EN 50201 |
Interfaces for DVB-IRD |
|
CENELEC EN 50289-1-5 |
Communication Cables - Specifications for Test Methods Part 1-5: Electrical Test Methods - Capacitance |
|
CENELEC EN 50289-1-7 |
Communication Cables - Specifications for Test Methods Part 1-7: Electrical Test Methods - Velocity of Propagation |
|
CENELEC EN 50325-4 |
Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces Part 4: CANopen |
|
CENELEC EN 60244-1 |
Methods of Measurement for Radio Transmitters Part 1: General Characteristics for Broadcast Transmitters-IEC 60244-1: 1999 |
|
CENELEC EN 60297-5-107 |
Mechanical Structures for Electronic Equipment - Dimensions of Mechanical Structures of the 482,6 mm (19 in) Series Part 5-107: Subracks and Associated Plug-In Units - Rear Mounted Plug-In Units-IEC 60297-5-107:2001; Superseded by EN 60297-3-101:2004 |
|
CENELEC EN 60352-2 |
Solderless Connections Part 2: Crimped Connections - General Requirements, Test Methods and Practical Guidance-IEC 60352-2: 2006 |
|
CENELEC EN 60512-12-7 |
Connectors for Electronic Equipment - Tests and Measurements Part 12-7: Soldering Tests - Test 12g: Solderability, Wetting Balance Method-IEC 60512-12-7: 2001; (E) |
|
CENELEC EN 60512-23-7 |
Connectors for electronic equipment Tests and measurements Part 23-7: Screening and filtering tests Test 23g: Effective transfer impedance of connectors-IEC 60512-23-7:2005 |
|
CENELEC EN 60512-6-5 |
Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods Part 6: Dynamic Stress Tests Section 5: Test 6e: Random Vibration-IEC 60512-6-5:1997, Modified |
|
CENELEC EN 60603-6 |
Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 6: Edge-Socket Connectors and Printed Board Connectors with 2,54 mm (0,1 in) Contact Spacing for Single or Double-Sided Printed Boards of 1,6 mm (0,063 in) Nominal Thickness-IEC 60603-6:1987 |
|
CENELEC EN 60749-5 |
Semiconductor devices Mechanical and climatic test methods Part 5: Steady-state temperature humidity bias life test-IEC 60749-5:2003 |
|
CENELEC EN 60793-1-49 |
Optical fibres Part 1-49: Measurement methods and test procedures - Differential mode delay-IEC 60793-1-49:2006 |
|
CENELEC EN 60793-2-20 |
Optical Fibres Part 2-20: Product Specifications - Sectional Specification for Category A2 Multimode Fibres-IEC 60793-2-20: 2001 |
|
CENELEC EN 60793-2-30 |
Optical fibres Part 2-30: Product specifications Sectional specification for category A3 multimode fibres-IEC 60793-2-30: 2002 |
|
CENELEC EN 60835-3-10 |
Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on Satellite Earth Stations Section 10: Terminal Equipment - TDMA Traffic Earth Station (IEC 835-3-10 : 1994) |
|
CENELEC EN 60870-5-103 |
Telecontrol Equipment and Systems Part 5-103: Transmission Protocols Companion Standard for the Informative Interface of Protection Equipment-IEC 60870-5-103:1997 |
|
CENELEC EN 60870-5-104 |
Telecontrol Equipment and Systems Part 5-104: Transmission Protocols - Network Access for IEC 60870-5-101 Using Standard Transport Profiles-IEC 60870-5-104: 2006 |
|
CENELEC EN 60870-5-2 |
Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 2: Link Transmission Procedures (IEC 870-5-2 : 1992) |
|
CENELEC EN 60870-5-3 |
Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 3: General Structure of Application Data |
|
CENELEC EN 60870-5-4 |
Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 4: Definition and Coding of Application Information Elements (IEC 870-5-4 : 1993) |
|
CENELEC EN 60870-6-503 |
Telecontrol Equipment and Systems Part 6-503: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations - TASE.2 Services and Protocol-IEC 60870-6-503: 2002 |
|
CENELEC EN 60966-1 |
Radio Frequency and Coaxial Cable Assemblies - Part 1: Generic Specification - General Requirements and Test Methods-IEC 60996-1: 1999 |
|
CENELEC EN 61076-2-101 |
Connectors for electronic equipment Part 2-101: Circular connectors Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications-IEC 61076-2-101:2003 |
|
CENELEC EN 61076-2-102 |
Connectors for Electronic Equipment Part 2-102: Circular Connectors with Assessed Quality - Detail Specification for Plugs and Jacks for External Low Voltage Power Supply-IEC 61076-2-102: 2002 |
|
CENELEC EN 61179 |
Helical-Scan Digital Composite Video Cassette Recording System Using 19 mm Magnetic Tape, Format D2 (NTSC, PAL, PAL-M) (IEC 1179 : 1993) |
|
CENELEC EN 61188-1-2 |
Printed Boards and Printed Board Assemblies - Design and Use Part 1-2: Generic Requirements - Controlled Impedance-IEC 61188-1-2:1998 |
|
CENELEC EN 61190-1-2 |
Attachment Materials for Electronic Assembly Part 1-2: Requirements for Solder Pastes for High-Quality Interconnections in Electronic Assembly-IEC 61190-1-2: 2002 |
|
CENELEC EN 61196-3 |
Radio Frequency Cables Part 3: Sectional Specification for Coaxial Cables for Local Area Networks-IEC 61196-3:1998 |
|
CENELEC EN 61248-3 |
Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 3: Sectional Specification for Power Transformers on the Basis of the Capability Approval Procedure-IEC 61248-3: 1996 |
|
CENELEC EN 61249-5-1 |
Materials for Interconnection Structures Part 5. Sectional Specification Set for Conductive Foils and Films with and without Coatings Section 1. Copper Foils (for the Manufacture of Copper- Clad Base Materials) (IEC 1249-5-1 : 1995) |
|
CENELEC EN 61280-1-3 |
Fibre Optic Communication Subsystem Basic Test Procedures Part 1-3: Test Procedures for General Communication Subsystems Central Wavelength and Spectral Width Measurement-IEC 61280-1-3: 1998 |
|
CENELEC EN 61290-11-2 |
Optical amplifiers Test methods Part 11-2: Polarization mode dispersion parameter Poincaré sphere analysis method-IEC 61290-11-2: 2005 |
|
CENELEC EN 61290-1-3 |
Optical amplifiers - Test methods Part 1-3: Power and gain parameters - Optical power meter method-IEC 61290-1-3:2005 |
|
CENELEC EN 61290-3 |
Optical Fibre Amplifiers - Basic Specification - Part 3: Test Methods for Noise Figure Parameters-IEC 61290-3:2000 |
|
CENELEC EN 61290-5-1 |
Optical amplifiers - Test methods Part 5-1: Reflectance parameters - Optical spectrum analyzer method-IEC 61290-5-1 |
|
CENELEC EN 61290-6-1 |
Optical Fibre Amplifiers - Basic Specification Part 6-1: Test Methods for Pump Leakage Parameters Optical Demultiplexer-IEC 61290-6-1: 1998 |
|
CENELEC EN 61290-7-1 |
Optical Fibre Amplifiers - basic Specification Part 7-1: Test Methods for Out-of-Band Insertion Losses Filtered Optical Power Meter-IEC 61290-7-1: 1998 |
|
CENELEC EN 61291-1 |
Optical Fibre Amplifiers Part 1: Generic Specification |
|
CENELEC EN 61291-2 |
Optical Fibre Amplifiers Part 2: Digital Applications - Performance Specification Template-IEC 61291-2:2000 |
|
CENELEC EN 61291-4 |
Optical amplifiers Part 4: Multichannel applications - Performance specification template-IEC 61291-4:2003 |
|
CENELEC EN 61291-5-2 |
Optical amplifiers Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers-IEC 61291-5-2:2002 |
|
CENELEC EN 61754-12 |
Fibre Optic Connector Interfaces Part 12: Type FS Connector Family-IEC 61754-12: 1999 |
|
CENELEC EN 61754-13 |
Fibre optic connector interfaces Part 13: Type FC-PC connector |
|
CENELEC EN 61754-15 |
Fibre Optic Connector Interfaces Part 15: Type LSH Connector Family-IEC 61754-15:1999 |
|
CENELEC EN 61850-10 |
Communication networks and systems in substations Part 10: Conformance testing-IEC 61850-10:2005 |
|
CENELEC EN 61935-2 |
Testing of balanced communication cabling in accordance with standards series EN 50173 Part 2: Patch cords and work area cords-IEC 61935-2:2005; Incorporates Corrigendum December 2005 |
|
CENELEC EN 61966-2-2 |
Multimedia systems and equipment Colour measurement and management Part 2-2: Colour management Extended RGB colour space scRGB-IEC 61966-2-2:2003 |
|
CENELEC EN 61988-1 |
Plasma display panels Part 1: Terminology and letter symbols-IEC 61988-1: 2003 |
|
CENELEC EN 62056-21 |
Electricity Metering - Data Exchange for Meter Reading, Tariff and Load Control Part 21: Direct Local Data Exchange-Supersedes EN 61107: 1996 |
|
CEN EN 797 |
Bar Coding - Symbology Specifications - `EAN/UPC´-Incorporates Corrigendum October 1996 |
|
CEN EN 818-5 |
Short Link Chain for Lifting Purposes - Safety - Part 5: Chain Slings - Grade 4 |
|
CEN EN 868-7 |
Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 7: Adhesive Coated Paper for the Manufacture of Heat Sealable Packs for Medical Use for Sterilization by Ethylene Oxide or Irradiation - Requirements and Test Methods |
|
CEN EN 868-7 |
Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 7: Adhesive Coated Paper for the Manufacture of Heat Sealable Packs for Medical Use for Sterilization by Ethylene Oxide or Irradiation - Requirements and Test Methods-Ratified European Text |
|
CEN EN ISO 11446 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage-(ISO 11446:2004) |
|
CEN EN ISO 11553-1 |
Safety of machinery - Laser processing machines - Part 1: General safety requirements-ISO 11553-1:2005; Supersedes EN 12626:1997 |
|
CEN EN ISO 12217-1 |
Small Craft - Stability and Buoyancy Assessment and Categorization - Part 1: Non-Sailing Boats of Hull Length Greater Than or Equal to 6 m-ISO 12217-1: 2002 |
|
CEN EN ISO 14509 |
Small Craft - Measurement of Airborne Sound Emitted by Powered Recreational Craft-ISO 14509: 2000 |
|
CEN EN ISO 14620-1 |
Space systems - Safety requirements - Part 1: System safety-ISO 14620-1: 2002 |
|
CEN EN ISO 15540 |
Ships and Marine Technology - Fire Resistance of Hose Assemblies - Test Methods-ISO 15540:1999 |
|
CEN EN ISO 15749-1 |
Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design-ISO 15749-1:2004 |
|
CEN EN ISO 15749-4 |
Ships and marine technology Drainage systems on ships and marine structures Part 4: Sanitary drainage, sewage disposal pipes-ISO 15749-4:2004 |
|
CEN EN ISO 18104 |
Health Informatics - Integration of a reference terminology model for nursing-ISO 18104:2003; |
|
CEN EN ISO 19112 |
Geographic information - Spatial referencing by geographic identifiers-ISO 19112:2003 |
|
CEN EN ISO 19114 |
Geographic information - Quality evaluation procedures-Incorporating corrigendum July 2006; ISO 19114:2003 |
|
CEN EN ISO 21351 |
Space systems - Functional and technical specifications-ISO 21351:2005 |
|
CEN EN ISO 2247 |
Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency-ISO 2247:2000; Supersedes EN 22247:1992 |
|
CEN EN ISO 252-1 |
Textile Conveyor Belts - Adhesive Strength between Constitutive Elements - Part 1: Methods of Test-ISO 252-1:1999 |
|
CEN EN ISO 340 |
Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method-ISO 340:2004; Supersedes EN 20340:1993 |
|
CEN EN ISO 8847 |
Small craft - Steering gear - Cable and pulley systems-Incorporates Corrigendum October 2005; ISO 8847:2004::1989 |
|
CEN EN ISO 9785 |
Ship and Marine Technology - Ventilation of Cargo Spaces Where Vehicles with Internal Combustion Engines Are Driven - Calculation of Theoretical Total Airflow Required |
|
CEN ENV 13321-2 |
Data Communication for HVAC Application Automation Net - Part 2: EIBnet |
|
CEN ENV 13607 |
Health Informatics - Messages for the Exchange of Information on Medicine Prescriptions |
|
CEN ENV 13608-1 |
Health Informatics - Security for Healthcare Communication - Part 1: Concepts and Terminology |
|
CEN ENV 13734 |
Health Informatics - Vital Signs Information Representation |
|
CEN ENV 13735 |
Health Informatics - Interoperability of Patient Connected Medical Devices |
|
CENELEC ENV 50142 |
Electromagnetic Compatibility - Basic Immunity Standard - Surge Immunity Tests |
|
CENELEC ES 59008-4-1 |
Data Requirements for Semiconductor Die - Part 4-1: Specific Requirements and Recommendations Test and Quality |
|
CENELEC ES 59011 |
Representation of Quality Rules and Metrics for Hardware and Software Design Languages |
|
CENELEC HD 120 |
Characteristic Impedances and Dimensions of Radio Frequency Coaxial Cables |
|
CENELEC HD 337 S2 |
Processed Disk Records and Reproducing Equipment |
|
CENELEC HD 493.1 S1 |
Dimensions of Mechanical Structures of the 482.6 mm (19 in) Series - Part 1: Panels and Racks |
|
CENELEC HD 493.2 S1 |
Dimensions of Mechanical Structures of the 482.6 mm (19 in) Series - Part 2: Cabinets and Pitches of Rack Structures |
|
CEN CEN/TS 14796 |
Health Informatics - Data Types |
|
CENELEC CLC/PRTR 50126-3 |
Railway Applications - The Specification and Demonstration of Reliability,Availability, Maintainability and Safety (RAMS) Part 3: Guide to the application of EN 50126-1 for Rolling Stock RAMS |
|
CEN CR 13644 |
Machine Readable Cards - Healthcare Applications - Logical Organisation of Data on Healthcare Professional Cards |
|
CENELEC EN 100015-4 |
Basic Specification: Protection of Electrostatic Sensitive Devices Part 4: Requirements for High Voltage Environments |
|
CENELEC EN 100114-1 |
Rule of Procedure: Quality Assessment Procedures Part 1: Approval of Manufacturers and Other Organizations |
|
CENELEC EN 100114-1 |
Rule of Procedure: Quality Assessment Procedures Part 1: Approval of Manufacturers and Other Organizations |
|
CEN EN 1047-2 |
Secure Storage Units - Classification and Methods of Test for Resistance to Fire - Part 2: Data Rooms and Data Containers |
|
CEN EN 1064 |
Health informatics - Standard communication protocol - Computer-assisted electrocardiography-Incorporates amendment A1: 03/2007 |
|
CEN EN 12080 |
Railway Applications - Axleboxes - Rolling Bearings |
|
CEN EN 12312-1 |
Aircraft Ground Support Equipment - Specific Requirements - Part 1: Passenger Stairs |
|
CEN EN 12312-13 |
Aircraft Ground Support Equipment - Specific Requirements - Part 13: Lavatory Service Equipment |
|
CEN EN 12312-2 |
Aircraft Ground Support Equipment - Specific Requirements - Part 2: CateringVvehicles |
|
CEN EN 12312-3 |
Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles |
|
CEN EN 12312-4 |
Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges |
|
CEN EN 12323 |
AIDC technologies - Symbology specifications - Code 16K |
|
CEN EN 12640 |
Securing of Cargo on Road Vehicles - Lashing Points on Commercial Vehicles for Goods Transportation - Minimum Requirements and Testing |
|
CEN EN 12644-2 |
Cranes - Information for Use and Testing - Part 2: Marking |
|
CEN EN 12707 |
Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l, and 225 l |
|
CEN EN 12707 |
Plastics Drums - Non-Removable Head (Tight Head) Drums with a Nominal Capacity of 210 l; 220 l and 225 l |
|
CEN EN 12806 |
Automotive liquefied petroleum gas components Other than containers |
|
CEN EN 12927-8 |
Safety requirements for cableway installations designed to carry persons Ropes Part 8: Magnetic rope testing (MRT) |
|
CEN EN 13149-1 |
Public transport - Road vehicle scheduling and control systems - Part 1: WORLDFIP definition and application rules for onboard data transmission-ENV 13149-1:1999 |
|
CEN EN 13193 |
Packaging - Packaging and the Environment - Terminology |
|
CEN EN 13247 |
Packaging - Specification for Tensional Strapping for Lifting, Lashing and Securing of Loads |
|
CEN EN 1332-1 |
Identification card systems — Man-machine interface — Part 1: Design principles for the user interface-Incorporating amendment A1: 5/2007 |
|
CEN EN 13606-4 |
Health informatics - Electronic health record communication - Part 4: Security |
|
CENELEC EN 137100 |
Sectional Specification: Fixed Aluminium Electrolytic a.c. Capacitors with Non- Solid Electrolyte for Motor Starter Applications Qualification Approval |
|
CEN EN 1398 |
Dock Levellers |
|
CENELEC EN 140401 |
Blank Detail Specification: Fixed Low Power Non-Wire Wound Surface Mounting (SMD) Resistors-Supersedes CECC 40 401: 1989 |
|
CEN EN 14092 |
Space Engineering - Space Environment |
|
CEN EN 14096-2 |
Non-Destructive Testing - Qualification of Radiographic Film Digitisation Systems - Part 2: Minimum Requirements |
|
CEN EN 14330 |
Inland navigation vessels - Studless anchor chain - Round steel link chain |
|
CEN EN 1493 |
Vehicle Lifts-Ratified European Text |
|
CEN EN 1756-1 |
Tail Lifts - Platform Lifts for Mounting on Wheeled Vehicles - Safety Requirements - Part 1: Tail Lifts for Goods |
|
CEN EN 2002-002 |
Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature |
|
CEN EN 2078 |
Aerospace Series - Metallic Materials - Manufacturing Schedule, Inspection Schedule, Inspection and Test Report - Definition, General Principles, Preparation and Approval |
|
CEN EN 2082-1 |
Aluminium Alloy Forging Stock and Forgings Technical Specification Part 1: General Requirements |
|
CEN EN 2082-2 |
Aerospace Series Aluminium Alloy Forging Stock and Forgings Technical Specification Part 2: Forging Stock |
|
CEN EN 2083 |
Aerospace Series - Copper and Copper Alloys Conductors for Electrical Cables - Product Standard |
|
CEN EN 2122 |
Aerospace Series - Washers, Flat, in Aluminium Alloy, Anodized or Chromated |
|
CEN EN 2157-1 |
Aerospace Series Steel Forging Stock and Forgings Technical Specifications Part 1 - General Requirements |
|
CEN EN 2260 |
Aerospace Series - Silicone Rubber (VMQ) - Hardness 60 IRHD |
|
CEN EN 2282 |
Characteristics of Aircraft Electrical Supplies |
|
CEN EN 2288 |
Bushes, Flanged Corrosion Resisting Steel with Self-Lubricating Liner Dimensions and Loads |
|
CEN EN 2289 |
Aerospace Series - Rod Bodies in Aluminium Alloy for Flight Controls - Technical Specification |
|
CEN EN 2375 |
Resin Preimpregnated Materials - Production Batch Sampling Procedure |
|
CEN EN 2430 |
Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 70 IRHD |
|
CEN EN 2431 |
Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 80 IRHD |
|
CEN EN 2501 |
Bearings, Spherical Plain in Corrosion Resisting Steel with Self- Lubricating Liner and Wide Inner Ring Dimensions and Loads |
|
CEN EN 2549 |
Aerospace Series - Bolts, Normal Hexagonal Head, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1 100 MPa (at Ambient Temperature)/315 Degrees C |
|
CEN EN 2550 |
Aerospace Series - Rivets, Solid, 100 Degrees Normal Countersunk Head, in Aluminium 1050A, Inch Based Series |
|
CEN EN 2551 |
Aerospace Series - Rivets, Solid, 100 Degrees Normal Countersunk Head with Dome, in Aluminium Alloy 2117, Inch Based Series |
|
CEN EN 2552 |
Aerospace Series - Rivets, Solid, 100 Degrees Normal Countersunk Head with Dome, in Aluminium Alloy 2117, Anodized or Chromated, Inch Based Series |
|
CEN EN 2591-318 |
Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 318: Fire-Resistance |
|
CEN EN 2591-6321 |
Aerospace series - Elements of electrical and optical connection Test methods Part 6321: Optical elements Damp heat, cyclic test |
|
CEN EN 2601 |
Aerospace Series - Fork Ends, Adjustable - Technical Specifications |
|
CEN EN 2746 |
Aerospace Series - Glass Fibre Reinforced Plastics - Flexural Test - Three Point Bend Method |
|
CEN EN 2791 |
Rod Ends, Adjustable, Single Fork and Threaded Shank with Engagement: 1,5 x Thread DO Dimensions and Loads |
|
CEN EN 2831 |
Aerospace Series - Hydrogen Embrittlement of Steels - Test by Slow Bending |
|
CEN EN 2859 |
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
|
CEN EN 2874 |
Aerospace Series - Bolts, Large Bihexagonal Head, Close Tolerance Normal Shank, Medium Length Thread, in Heat Resisting Nickel Base Alloy, Passivated - Classification: 1550 MPa (at Ambient Temperature) /315 Degrees C |
|
CEN EN 28805 |
Information Processing Systems - Computer Graphics - Graphical Kernel System for Three Dimensions (GKS-3D) Functional Description |
|
CEN EN 29008 |
Glass Bottles - Verticality - Test Method (ISO 9008 : 1991) |
|
CEN EN 2912 |
Aerospace Series - Washers, Flat, Large Diameter, in Aluminium Alloy, Anodized or Chromated |
|
CEN EN 3032 |
Test Method for Dry Film Lubricants Thickness Measurement |
|
CEN EN 3081 |
Aerospace Series - Pipe Coupling 8 Degrees 30´ in Titanium Alloy - Ferrules, Welded with Dynamic Beam Seal End, for Repair |
|
CEN EN 31253 |
Lasers and Laser-Related Equipment - Laser Device - Mechanical Interfaces (ISO 11253 : 1993) |
|
CEN EN 3212 |
Aerospace Series - Paints and Varnishes - Corrosion Test by Alternate Immersion in a Buffered Sodium Chloride Solution |
|
CEN EN 3230 |
Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated, Classification: 900 MPa (at ambient temperature)/235°C |
|
CEN EN 3306 |
Aerospace Series - Screws, 100 Degrees Countersunk Normal Head, Offset Cruciform Recess, Threaded to Head, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification : 1100 MPa (at Ambient Temperature) /315 Degrees C |
|
CEN EN 3475-301 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 301: Ohmic Resistance Per Unit Length |
|
CEN EN 3475-302 |
Aerospace Series - Cables, Electrical, Aircraft use - Test Methods - Part 302: Voltage Proof Test |
|
CEN EN 3475-303 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 303: Insulation Resistance |
|
CEN EN 3475-304 |
Aerospace Series - Cables, Electrical, Aircraft Use, Test Methods - Part 304: Surface Resistance |
|
CEN EN 3475-403 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 403: Delamination and Blocking |
|
CEN EN 3475-406 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 406: Cold Bend Test |
|
CEN EN 3475-410 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 410: Thermal Endurance |
|
CEN EN 3475-502 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 502: Notch Propagation |
|
CEN EN 3475-503 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 503: Scrape Abrasion |
|
CEN EN 3475-507 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 507: Adherence of Plating |
|
CEN EN 3475-605 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 601: Wet Short Circuit Test |
|
CEN EN 3475-702 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 702: Screen Pushback Capability |
|
CEN EN 3475-801 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 801: Capacitance per Unit Length |
|
CEN EN 3475-803 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 803: Capacitance Variation |
|
CEN EN 3475-804 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 804: Velocity of Propagation |
|
CEN EN 3475-805 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 805: Characteristic Impedance |
|
CEN EN 3475-806 |
Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 806: Attenuation |
|
CEN EN 3546 |
Aluminium Alloy AL-C42201 T6 Precision Castings |
|
CEN EN 3665 |
Aerospace Series - Test Methods for Paints and Varnishes - Filiform Corrosion Resistance Test on Aluminium Alloys |
|
CEN EN 3959 |
Aerospace Series - Cobalt Base Alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler Metal for Brazing - Powder or Paste |
|
CEN EN 4017 |
Aerospace Series - Pipe Coupling 8 Degrees 30´ in Titanium Alloy - Elbows 90 Degrees |
|
CEN EN 4021 |
Aerospace Series - Pipe Coupling 8 Degrees 30´ in Titanium Alloy - Elbows 90 Degree, Bulkhead |
|
CEN EN 4115 |
Aerospace Series - Cushion, Rubber for Clamps - Dimensions, Masses |
|
CENELEC EN 50065-4-1 |
Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 148,5 kHz Part 4-1: Low Voltage Decoupling Filters - Generic Specification-Ratified European Text:01/08/2001 |
|
CENELEC EN 50065-4-2 |
Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz Part 4-2: Low voltage decoupling filters - Safety requirements-Includes Amendments A1:2003 and A2:2005 |
|
CENELEC EN 50083-4 |
Cable Networks for Television Signals, Sound Signals and Interactive Services Part 4: Passive Wideband Equipment for Coaxial Cable Networks-Ratified European Text |
|
CENELEC EN 50083-9 |
Cable networks for television signals, sound signals and interactive services Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams |
|
CENELEC EN 50124-1 |
Railway applications Insulation coordination Part 1: Basic requirements Clearances and creepage distances for all electrical and electronic equipment-Includes amendments A1:2003 and A2:2005 |
|
CENELEC EN 50125-1 |
Railway Applications - Environmental Conditions for Equipment Part 1: Equipment on Board Rolling Stock |
|
CENELEC EN 50238 |
Railway applications - Compatibility between rolling stock and train detection systems |
|
CENELEC EN 50255 |
Digital Audio Broadcasting System - Specification of the Receiver Data Interface (RDI) |
|
CENELEC EN 50289-3-9 |
Communication Cables - Specifications for Test Methods Part 3-9: Mechanical Test Methods - Bending Tests |
|
CENELEC EN 50290-2-28 |
Communication Cables Part 2-28: Common Design Rules and Construction - Filling Compounds for Filled Cables-Supersedes HD 624.8 S1:1995 + A1:1998 |
|
CENELEC EN 55016-4-2 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 4-2: Uncertainties, statistics and limit modelling Uncertainty in EMC measurements-CISPR 16-4-2:2003 |
|
CEN EN 584-1 |
Non Destructive Testing - Industrial Radiographic Film - Part 1: Classification of Film Systems for Industrial Radiography |
|
CENELEC EN 60249-2-3 |
Base Materials for Printed Circuits Part 2: Specifications Specification No.3: Epoxide Cellulose Paper Copper-Clad Laminated Sheet of Defined Flammability (Vertical Burning Test)-Includes Amendments A2:1994, A3:1995 and A4:2000; IEC 249-2-3:1987 + A1:1989 + A2:1993 + A3:1994 + A4:2000; Supersedes HD 313.2.3 S2:1990 |
|
CENELEC EN 60268-16 |
Sound System Equipment - Part 16: Objective Rating of Speech Intelligibility by Speech Transmission Index-IEC 60268-16:2003 |
|
CENELEC EN 60297-5-102 |
Mechanical Structures for Electronic Equipment - Dimensions of Mechanical Structures of the 482,6 mm (19 in) Series Part 5-102: Subracks and Associated Plug-In Units - Electromagetic Shielding Provision-IEC 60297-5-102:2001; Superseded by EN 60297-3-101:2004 |
|
CENELEC EN 60495 |
Single Sideband Power-Line Carrier Terminals (IEC 495 : 1993) |
|
CENELEC EN 60512-11-11 |
Connectors for Electronic Equipment - Tests and Measurements - Part 11-11: Climatic Tests - Test 11k: Low Air Pressure-IEC 60512-11-11: 2002 |
|
CENELEC EN 60512-4-1 |
Connectors for electronic equipment Tests and measurements Part 4-1: Voltage stress tests Test 4a: Voltage proof-IEC 60512-4-1:2003 |
|
CENELEC EN 60555(PART 1) |
Disturbances in Supply Systems Caused by Household Appliances and Similar Electrical Equipment - Part 1: Definitions |
|
CENELEC EN 60603-13 |
Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 13: Detail Specification for Two-Part Connectors of Assessed Quality, for Printed Boards for Basic Grid of 2,54 mm (0,1 in) with Free Connectors for Non-Accessible Insulation Displacement Terminations (ID)-IEC 60603-13:1995 |
|
CENELEC EN 60835-3-6 |
Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on Satellite Earth Stations Section 6: High Power Amplifiers-IEC 835-3-6: 1996 |
|
CENELEC EN 60870-2-2 |
Telecontrol Equipment and Systems - Part 2: Operating Conditions - Section 2: Environmental Conditions (Climate, Mechanical and Other Non-Electrical Influences)-IEC 870-2-2: 1996; Partly Supersedes HD 546.2.1 S1: 1991 |
|
CENELEC EN 60870-5-102 |
Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 102: Companion Standard for the Transmission of Integrated Totals in Electric Power Systems-IEC 870-5-102: 1996 |
|
CENELEC EN 60870-5-5 |
Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 5: Basic Application Functions (IEC 870-5-5 : 1995) |
|
CENELEC EN 60870-6-2 |
Telecontrol Equipment and Systems Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations Section 2: Use of Basic Standards (OSI Layers 1-4) (IEC 870-6-2 : 1995) |
|
CENELEC EN 60870-6-502 |
Telecontrol Equipment and Systems Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations Section 502: TASE.1 Protocol Definitions (IEC 870-6-502 : : 1995) |
|
CENELEC EN 60870-6-601 |
Telecontrol Equipment and Systems Part 6: Telecontrol Protocols Compatible with ISO Standards ITU-T Recommendations Section 601 : Functional Profile for Providing the Connection-Oriented Transport Service in End System Connected Via Permanent Access to a Packet Switched Data Network (IEC 870-6-601 : 1994) |
|
CENELEC EN 60870-6-701 |
Telecontrol Equipment and Systems Part 6-701: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations Functional Profile for Providing the TASE.1 Application Service in End Systems-IEC 60870-6-701:1998 |
|
CENELEC EN 60870-6-702 |
Telecontrol Equipment and Systems Part 6-702: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations - Functional Profile for Providing the TASE.2 Application Service in End Systems-IEC 60870-6-702:1998 |
|
CENELEC EN 60872 |
Marine Automatic Radar Plotting Aids (ARPA) Operational Requirements - Methods of Testing and Test Results (IEC 872:1987) |
|
CENELEC EN 60936 |
Shipborne Radar - Operational and Performance Requirements - Methods of Test and Required Test Results (IEC 936 : 1988) |
|
CENELEC EN 60938-2 |
Fixed Inductors for Electromagnetic Interference Suppression Part 2: Sectional Specification-Incorporates Amendment 1: February 2007 |
|
CENELEC EN 60939-1 |
Passive filter units for electrom agnetic interference suppression Part 1: Generic specification-IEC 60939-1:2005; Supersedes EN 133000: 1997 |
|
CENELEC EN 61030 |
Audio, Video and Audiovisual Systems Domestic Digital Bus (D2B) (IEC 1030:1991 + A1:1993) |
|
CENELEC EN 61076-1 |
Connectors for electronic equipment - Product requirements Part 1: Generic specification-IEC 61076-1:2006 |
|
CENELEC EN 61076-2 |
Connectors for Use in d.c. Low-Frequency Analogue and Digital High-Speed Data Applications - Part 2: Circular Connectors with Assessed Quality - Sectional Specification-IEC 61076-2: 1998 |
|
CENELEC EN 61076-2-103 |
Connectors for electronic equipment Part 2-103: Circular connectors Detail specification for a range of multipole connectors (type ´XLR´)-IEC 61076-2-103:2004 |
|
CENELEC EN 61094-2 |
Measurement Microphones Part 2: Primary Method for Pressure Calibration of Laboratory Standard Microphones by the Reciprocity Technique (IEC 1094-2 : 1992) |