|
CENELEC EN 61169-1-1 |
Radio-Frequency Connectors Part 1-1: Single, Multi-Series, Dual-Language Blank Detail Specification-IEC 1169-1-1: 1996 |
|
CENELEC EN 61196-3-2 |
Radio Frequency Cables Part 3-2: Coaxial Cables for Digital Communication in Horizontal Floor Wiring Detail Specification for Coaxial Cables with Solid Dielectric for Local Area Networks of 185 m Reach and up to 10 Mb/s-IEC 61196-3-2: 1997 |
|
CENELEC EN 61196-4 |
Coaxial communication cables Part 4: Sectional specification for radiating cables-IEC 61196-4:2004 |
|
CENELEC EN 61280-2-5 |
Fibre Optic Communication Subsystem Basic Test Procedures Part 2-5: Test Procedures for Digital Systems Jitter Transfer Function Measurement-IEC 61280-2-5:1998 |
|
CENELEC EN 61290-10-1 |
Optical amplifiers Test methods Part 10-1: Multichannel parameters Pulse method using an optical switch and optical spectrum analyzer-IEC 61290-10-1:2003 |
|
CENELEC EN 61290-1-1 |
Optical amplifiers - Test methods Part 1-1: Power and gain parameters - Optical spectrum analyzer method |
|
CENELEC EN 61290-1-2 |
Optical amplifiers - Test methods Part 1-2: Power and gain parameters - Electrical spectrum analyzer method |
|
CENELEC EN 61290-2-2 |
Optical Fibre Amplifiers - Basic Specification Part 2-2: Test Methods for Optical Power Parameters Electrical SPectrum Analyzer-IEC 61290-2-2: 1998 |
|
CENELEC EN 61290-2-3 |
Optical Fibre Amplifiers - Basic Specification Part 2-3: Test Methods for Optical Power Parameters Optical Power Meter-IEC 61290-2-3: 1998 |
|
CENELEC EN 61290-5-3 |
Optical Fibre Amplifiers - Basic Specification Part 5-3: Test Methods for Reflectance Parameters - Reflectance Tolerance Using an Electrical Spectrum Analyser-IEC 61290-5-3: 2002 |
|
CENELEC EN 61300-3-31 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-31: Examinations and Measurements - Coupled Power Ratio Measurement for Fibre Optic Sources-IEC 61300-3-31:2003 |
|
CENELEC EN 61305-3 |
Household High-Fidelity Audio Equipment and Systems Methods of Measuring and Specifying the Performance Part 3: Amplifiers (IEC 1305-3 : 1995) |
|
CENELEC EN 61305-5 |
Household high-fidelity audio equipment and systems Methods of measuring and specifying the performance Part 5: Loudspeakers-IEC 61305-5:2003 |
|
CENELEC EN 61643-311 |
Components for Low-Voltage Surge Protective Devices - Part 311: Specification for Gas Discharge Tubes (GDT)-IEC 61643-311: 2001 |
|
CENELEC EN 61643-321 |
Components for Low-Voltage Surge Protective Devices Part 321: Specifications for Avalanche Breakdown Diode (ABD)-IEC 61643-321: 2001 |
|
CENELEC EN 61727 |
Photovoltaic (PV) Systems Characteristics of the Utility Interface (IEC 1727 : 1995) |
|
CENELEC EN 61754-19 |
Fiber Optic Connector Interfaces Part 19: Type SG Connector Family-IEC 61754-19: 2001 |
|
CENELEC EN 61804-2 |
Function Blocks (FB) for process control Part 2: Specification of FB concept and Electronic Device Description Language (EDDL)-IEC 61804-2:2004 |
|
CENELEC EN 61850-8-1 |
Communication networks and systems in substations Part 8-1: Specific Communication Service Mapping (SCSM) Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3-IEC 61850-8-1:2004 |
|
CENELEC EN 61935-1 |
Testing of balanced communication cabling in accordance with standards series EN 50173 Part 1: Installed cabling-IEC 61935-1:2005, modified |
|
CENELEC EN 61943 |
Integrated Circuits - Manufacturing Line Approval Application Guideline-IEC 61943:1999 |
|
CENELEC EN 61966-3 |
Multimedia Systems and Equipment - Colour Measurement and Management Part 3: Equipment Using Cathode Ray Tubes-IEC 61966-3: 2000 |
|
CENELEC EN 61966-8 |
Multimedia Systems and Equipment - Colour Measurement and Management - Part 8: Multimedia Colour Scanners-IEC 61966-8: 2001 |
|
CENELEC EN 61967-1 |
Integrated Circuits - Measurement of Electromagnetic Emissions, 150 kHZ to 1 GHz Part 1: General Conditions and Definitions-IEC 61967-1: 2002 |
|
CENELEC EN 61993-2 |
Maritime Navigation and Radiocommunication Equipment and Systems - Automatic Identification Systems (AIS) Part 2: Class A Shipborne Equipment of the Universal Automatic Identification System (AIS) - Operational and Performance Requirements, Methods of Test and Required Test Results-IEC 61993-2: 2001 |
|
CENELEC EN 62056-62 |
Electricity metering - Data exchange for meter reading, tariff and load control - Part 62: Interface classes |
|
CENELEC EN 62149-4 |
Fibre optic active components and devices Performance standards Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application-IEC 62149-4:2003 + Corrigendum 2003 |
|
CEN EN 818-3 |
Short Link Chain for Lifting Purposes - Safety - Part 3: Medium Tolerance Chain for Chain Slings - Grade 4 |
|
CENELEC EN 82045-1 |
Document Management Part 1: Principles and Methods-IEC 82045-1: 2001 |
|
CEN EN 841 |
Bar Coding - Symbology Specifications - Format Description |
|
CEN EN 868-8 |
Packaging Materials and Systems for Medical Devices Which are to Be Sterilized - Part 8: Re-Usable Sterilization Containers for Steam Sterilizers Conforming to EN 285 - Requirements and Test Methods |
|
CEN EN 9200 |
Aerospace series - Programme management - Guidelines for project management specification |
|
CEN EN ISO 10133 |
Small Craft - Electrical Systems - Extra-Low-Voltage D.C. Installations-ISO 10133:2000 |
|
CEN EN ISO 10592 |
Small Craft - Hydraulic Steering Systems-Includes Amendment A1:2000; ISO 10592:1994 |
|
CEN EN ISO 11145 |
Optics and Optical Instruments - Lasers and Laser-Related Equipment - Vocabulary and Symbols-ISO 11145:2006 |
|
CEN EN ISO 11674 |
Ships and Marine Technology - Heading Control Systems-ISO 11674: 2000 |
|
CEN EN ISO 12215-3 |
Small Craft - Hull Construction and Scantlings - Part 3: Materials: Steel, Aluminium Alloys, Wood, Other Materials-ISO 12215-3:2002 |
|
CEN EN ISO 12216 |
Small Craft Windows, Portlights, Hatches, Deadlights and Doors Strength and Watertightness Requirements-ISO 12216: 2002 |
|
CEN EN ISO 14890 |
Conveyor belts Specification for rubber or plastics covered conveyor belts of textile construction for general use-ISO 14890:2003 |
|
CEN EN ISO 15749-3 |
Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum system-ISO 15749-3:2004 |
|
CEN EN ISO 16851 |
Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor belt-ISO 16851:2004 |
|
CEN EN ISO 21281 |
Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks - Rules for the construction and layout of pedals-ISO 21281:2005; Supersedes EN 281:1988 |
|
CEN EN ISO 2234 |
Packaging Complete, filled transport packages and unit loads Stacking tests using a static load-ISO 2234: 2000; Supersedes EN 22234: 1992 |
|
CEN EN ISO 3098-5 |
Technical Product Documentation - Lettering Part 5: CAD Lettering of the Latin Alphabet, Numerals and Marks-ISO 3098-5:1997 |
|
CEN EN ISO 505 |
Converyor Belts - Method for the Determination of the Tear Propagation Resistance of Textile Conveyor Belts-ISO 505: 1999 |
|
CEN EN ISO 5620-2 |
Shipbuilding and Marine Structures - Filling Connection for Drinking Water Tanks - Part 2: Components-ISO 5620-2: 1992 |
|
CEN EN ISO/IEC 13818-3 |
Information Technology - Generic of Moving Coding Pictures Associated Audio Information - Part 3: Audio-ISO/IEC 13 818-3: 1995 |
|
CEN EN ISO/IEC 15419 |
Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Digital Imaging and Printing Performance Testing-ISO/IEC 15419:2001; Supersedes ENV 12648:1997 and ENV 13066:1998 |
|
CEN EN ISO/IEC 7811-2 |
Identification Cards - Recording Technique - Part 2: Magnetic Stripe-ISO/IEC 7811-2: 1995 |
|
CEN EN ISO/IEC 7811-3 |
Identification Cards - Recording Technique - Part 3: Location of Embossed Characters on ID-1 Cards-ISO/IEC 7811-3: 1995 |
|
CEN EN ISP 11183-2 |
Information Technology - International Standardized Profiles AOM1n OSI Management - Management Communications - Part 2: CMISE/ROSE for AOM12 - Enhanced Management Communications (ISO/IEC ISP 11183-2: 1992) |
|
CEN ENV 12 448 |
Paper - Printing and Business Paper - Determination of the Coefficient of Static Friction |
|
CEN ENV 13093 |
Public Transport - Road Vehicles - Driver´s Console Mechanical Interface Requirements - Minimum Display and Keypad Parameters |
|
CEN ENV 13606-2 |
Health Informatics - Electronic Healthcare Record Communication - Part 2: Domain Term List |
|
CEN ENV 13606-3 |
Health Informatics - Electronic Healthcare Record Communication - Part 3: Distribution Rules |
|
CEN ENV 13608-2 |
Health Informatics - Security for Healthcare Communication - Part 2: Secure Data Objects |
|
CEN ENV 13608-3 |
Health Informatics - Security for Healthcare Communication - Part 3: Secure Data Channels |
|
CEN ENV 13729 |
Health Informatics - Secure User Identification - Strong Authentication using Microprocessor Cards |
|
CEN ENV 13940 |
Health Informatics System of concepts to support continuity of care |
|
CENELEC HD 129.2 S2 |
Flanges for Waveguides - Part 2: Revelant Specifications for Flanges for Ordinary Rectangular Waveguides |
|
CENELEC HD 207 |
Recommendation for Capacitors for Inductive Heat Generating Plants Operating at Frequencies Between 40 and 24000 Hz |
|
CENELEC HD 483.3 S1 |
Sound System Equipment Part 3: Amplifiers |