|
CEN EN ISO 3651-2 |
Determination of Resistance to Intergranular Corrosion of Stainless Steels - Part 2: Ferritic, Austenitic and Ferritic-Austenitic (Duplex) Stainless Steels - Corrosion Test in Media Containing Sulfuric Acid-ISO 3651-2:1998 |
|
CEN EN ISO 3738-2 |
Hardmetals - Rockwell hardness test (scale A) - Part 2: Preparation and calibration of standard test blocks-ISO 3738-2:1988 |
|
CEN EN ISO 4404-1 |
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Watercontaining fluids-ISO 4404-1:2001 |
|
CEN EN ISO 4545-1 |
Metallic materials Knoop hardness test Part 1: Test method-ISO 4545-1:2005 |
|
CEN EN ISO 4545-2 |
Metallic materials Knoop hardness test Part 2: Verification and calibration of testing machines-ISO 4545-2:2005 |
|
CEN EN ISO 4545-3 |
Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks-ISO 4545-3: 2005 |
|
CEN EN ISO 661 |
Animal and Vegetable Fats and Oils - Preparation of Test Sample-ISO 661:2003 |
|
CEN EN ISO 6644 |
Flowing cereals and milled cereal products - Automatic sampling by mechanical means |
|
CEN EN ISO 6974-5 |
Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 5: Determination of Nitrogen, Carbon Dioxide and C1 to C5 and C6+ Hydrocarbons for a Laboratory and On-Line Process Application Using Three Columns-ISO 6974-5: 2000 |
|
CEN EN ISO 7539-3 |
Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 3: Preparation and Use of U-Bend Specimens (ISO 7539-3: 1989) |
|
CEN EN ISO 845 |
Cellular Plastics and Rubbers - Determination of Apparent (Bulk) Density (ISO 845 : 1988) |
|
CEN EN ISO 8968-1 |
Milk - Determination of Nitrogen Content - Part 1: Kjeldahl Method-ISO 8968-1: 2001 |
|
CEN EN 10016-1 |
Non-Alloy Steel Rod for Drawing and/or Cold Rolling - Part 1: General Requirements |
|
CEN EN 1013-1 |
Light Transmitting Profiled Plastic Sheeting for Single Skin Roofing - Part 1: General Requirements and Test Methods |
|
CEN EN 10218-1 |
Steel Wire and Wire Products - General - Part 1: Test Methods |
|
CEN EN 10222-2 |
Steel Forgings for Pressure Purposes - Part 2: Ferritic and Martensitic Steels with Specified Elevated Temperature Properties |
|
CEN EN 10256 |
Non-Destructive Testing of Steel Tubes - Qualification and Competence of Level 1 and 2 Non-Destructive Testing Personnel |
|
CEN EN 10264-2 |
Steel Wire and Wire Products - Steel Wire for Ropes - Part 2: Cold Drawn Non Alloy Steel Wire for Ropes for General Applications |
|
CEN EN 10264-4 |
Steel Wire and Wire Products - Steel Wire for Ropes - Part 4: Stainless Steel Wire |
|
CEN EN 10305-6 |
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
|
CEN EN 1067 |
Adhesives - Examination and Preparation of Samples for Testing |
|
CEN EN 1071-2 |
Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method |
|
CEN EN 1179 |
Zinc an zinc alloys - Primary zinc |
|
CEN EN 12012-3 |
Rubber and Plastics Machines - Size Reduction Machines - Part 3: Safety Requirements for Shredders |
|
CEN EN 12020-1 |
Aluminium and Aluminium Alloys - Extruded Precision Profiles in Alloys EN AW-6060 and EN AW-6063 - Part 1: Technical Conditions for Inspection and Delivery |
|
CEN EN 12099 |
Plastics Piping Systems - Polyethylene Piping Materials and Components - Determination of Volatile Content |
|
CEN EN 1218-2 |
Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains-Incorporating corrigendum December 2006 |
|
CEN EN 12248 |
Sawn Timber Used in Industrial Packaging - Permitted Deviations and Preferential Sizes |
|
CEN EN 12280-3 |
Rubber- or Plastic-Coated Fabrics Accelerated Ageing Tests Part 3: Environmental Ageing |
|
CEN EN 12481 |
Self Adhesive Tapes - Terminology |
|
CEN EN 12514-1 |
Installations for Oil Supply Systems for Oil Burners - Part 1: Safety Requirements and Tests; Parts, Oil Feed Pumps, Control and Safety Devices, Supply Tanks |
|
CEN EN 12591 |
Bitumen and Bituminous Binders - Specifications for Paving Grade Bitumens |
|
CEN EN 12597 |
Bitumen and Bituminous Binders - Terminology |
|
CEN EN 12625-3 |
Tissue Paper and Tissue Products - Part 3: Determination of Thickness, Bulking Thickness and Apparent Bulk Density-Superseded by EN ISO 12625-3:2005 |
|
CEN EN 12873-3 |
Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins |
|
CEN EN 1302 |
Chemicals Used for Treatment of Water for Human Consumption - Aluminium-Based Coagulants - Analytical Methods-Incorporating Corrigendum February 2002 |
|
CEN EN 13411-6 |
Terminations for steel wire ropes Safety Part 6: Asymmetric wedge socket |
|
CEN EN 13512 |
Footwear - Test Methods for Uppers and Lining - Flex Resistance |
|
CEN EN 13604 |
Copper and Copper Alloys - Products of High Conductivity Copper for Electronic Tubes, Semiconductor Devices and Vacuum Applications |
|
CEN EN 13706-1 |
Reinforced plastics composites Specifications for pultruded profiles Part 1: Designation |
|
CEN EN 13732 |
Food processing machinery - Bulk milk coolers on farms - Requirements for construction, performance, suitability for use, safety and hygiene |
|
CEN EN 13773 |
Textiles and textile products Burning behaviour Curtains and drapes Classification scheme |
|
CEN EN 1380 |
Timber Structures - Test Methods - Load Bearing Nailed Joints |
|
CEN EN 13871 |
Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
|
CEN EN 13999-4 |
Adhesives Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application Part 4: Determination of volatile diisocyanates |
|
CEN EN 14022 |
Structural adhesives Determination of the pot life (working life) of multicomponent adhesives |
|
CEN EN 14105 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents (Reference method) |
|
CEN EN 14106 |
Fat and oil derivatives Fatty Acid Methyl Esters (FAME) Determination of free glycerol content |
|
CEN EN 14175-2 |
Fume cupboards Part 2: Safety and performance requirements |
|
CEN EN 14179-1 |
Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description |
|
CEN EN 14286 |
Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
|
CEN EN 1465 |
Adhesives - Determination of Tensile Lap-Shear Strength of Rigid-To-Rigid Bonded Assemblies (ISO 4587:1979 Modified) |
|
CEN EN 14718 |
Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method |
|
CEN EN 15197 |
Wood-based panels - Flaxboards - Specifications |
|
CEN EN 15326 |
Bitumen and bituminous binders - Measurement of density and specific gravity - Capillary-stoppered pyknometer method |
|
CEN EN 15536 |
Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods |
|
CEN EN 1559-6 |
Founding - Technical Conditions of Delivery - Part 6: Additional Requirements for Zinc Alloy Castings-Ratified European Text |
|
CEN EN 1560 |
Founding - Designation System for Cast Iron - Material Symbols and Material Numbers |
|
CEN EN 1780-1 |
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
|
CEN EN 1974 |
Food Processing Machinery - Slicing Machines - Safety and Hygiene Requirements |
|
CEN EN 29073-3 |
Textiles - Test Methods for Nonwovens - Part 3: Determination of Tensile Strength and Elongation |
|
CEN EN 300 |
Oriented Strand Boards (OSB) - Definitions, classification and specifications |
|
CEN EN 313-1 |
Plywood - Classification and Terminology - Part 1: Classification |
|
CEN EN 3997 |
Aerospace series - Aluminium alloy AL-P2024-T3 - Sheet and strip 0,4 mm < a < 6 mm |
|
CEN EN 438-5 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates-Supersedes EN 438-1:1991 and EN 438-2:1991 |
|
CEN EN 603-3 |
Aluminium and Aluminium Alloys - Wrought Forging Stock - Part 3: Tolerances on Dimensions and Form |
|
CEN EN 634-1 |
Cement-Bonded Particleboards - Specification - Part 1: General Requirements |
|
CEN EN 635-1 |
Plywood - Classification by Surface Appearance - Part 1: General |
|
CEN EN 635-3 |
Plywood - Classification by Surface Appearance - Part 3: Softwood |
|
CEN EN 728 |
Plastics Piping and Ducting Systems - Polyolefin Pipes and Fittings - Determination of Oxidation Induction Time |
|
CEN EN 755-3 |
Aluminium and Aluminium Alloys - Extruded Rod/ Bar, Tube and Profiles - Part 3: Round Bars, Tolerances on Dimensions and Form |
|
CEN EN 820-3 |
Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching-Supersedes ENV 820-3:1993 |
|
CEN EN 844-12 |
Round and Sawn Timber - Terminology - Part 12: Additional Terms and General Index |
|
CEN EN 848-2 |
Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
|
CEN EN 942 |
Timber in joinery - General requirements |
|
CEN EN 993-10 |
Methods of Test for Dense Shaped Refractory Products - Part 10: Determination of Permanent Change in Dimensions on Heating |
|
CEN EN 993-7 |
Methods of Test for Dense Shaped Refractory Products - Part 7: Determination of Modulus of Rupture at Elevated Temperatures |
|
CEN EN ISO 10438-3 |
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems |
|
CEN EN ISO 10442 |
Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors-ISO 10442:2002 |
|
CEN EN ISO 105- D02 |
Textiles - Tests for Colour Fastness - Part D02: Colour Fastness to Rubbing: Organic Solvents (ISO 105-D02 : 1993) |
|
CEN EN ISO 11339 |
Adhesives - T-peel test for flexible-to-flexible bonded assemblies-ISO 11339:2003; Supersedes EN 14173:2002 |
|
CEN EN ISO 11403-3 |
Plastics - Acquisition and Presentation of Comparable Multipoint Data - Part 3: Environmental Influences of Properties-ISO 11403-3:1999 |
|
CEN EN ISO 1183-3 |
Plastics - Methods for Determining the Density of Non-Cellular Plastics - Part 3: Gas Pyknometer Method-ISO 1183-3:1999 |
|
CEN EN ISO 13500 |
Petroleum and Natural Gas Industries - Drilling Fluid Materials - Specifications and Tests-ISO 13500:2006 |
|
CEN EN ISO 13503-5 |
Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants-(ISO 13503-5):2006 |
|
CEN EN ISO 13690 |
Cereals, pulses and milled products - Sampling of static batches |
|
CEN EN ISO 13934-1 |
Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip Method-ISO 13934-1:1999 |
|
CEN EN ISO 13936-3 |
Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 3: Needle clamp method |
|
CEN EN ISO 14125 |
Fibre-reinforced plastic composites - Determination of flexural properties-ISO 14125: 1998; Incorporating Corrigendum July 2002; Supersedes EN 63: 1977 |
|
CEN EN ISO 15831 |
Clothing - Physiological effects - Measurement of thermal insulation by means of a thermal manikin-ISO 15831:2004 |
|
CEN EN ISO 1923 |
Cellular Plastics and Rubbers - Determination of Linear Dimensions (ISO 1923:1981) |
|
CEN EN ISO 196 |
Wrought Copper and Copper Alloys - Detection of Residual Stress - Mercury(I) Nirate Test (ISO 196 : 1978) |
|
CEN EN ISO 21415-3 |
Wheat and wheat flour - Gluten content - Part 3: Determination of dry gluten from wet gluten by an oven drying method |
|
CEN EN ISO 2740 |
Sintered Metal Materials, Excluding Hardmetals - Tensile Test Pieces |
|
CEN EN ISO 2758 |
Paper - Determination of bursting strength-ISO 2758:2001 |
|
CEN EN ISO 3071 |
Textiles Determination of pH of aqueous extract (ISO 3071:2005)-: 1998 |
|
CEN EN ISO 3887 |
Steels - Determination of depth of decarburization-ISO 3887:2003 |
|
CEN EN ISO 4545-4 |
Metallic materials - Knoop hardness test - Part 4: Table of hardness values-ISO 4545-4:2005 |
|
CEN EN ISO 6143 |
Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures |
|
CEN EN ISO 6509 |
Corrosion of Metals and Alloys - Determination of Dezincification Resistance of Brass (ISO 6509:1981) |
|
CEN EN ISO 6940 |
Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens-ISO 6940:2004 |
|
CEN EN ISO 6974-3 |
Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 3: Determination of Hydrogen, Helium, Oxygen, Nitrogen, Carbon Dioxide and Hydrocarbons up to C8 Using Two Packed Columns-ISO 6974-3: 2000 |
|
CEN EN ISO 6974-4 |
Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 4: Determination of Nitrogen, Carbon Dioxide and C1 to C5 and C6+ Hydrocarbons for a Laboratory and On-Line Measuring System Using Two Columns-ISO 6974-1: 2000 |
|
CEN EN ISO 9073-14 |
Textiles - Test methods for nonwovens - Part 14: Coverstock wetback |
|
CEN ENV 1090-3 |
Execution of steel structures Part 3: Supplementary rules for high yield strength steels |
|
CEN ENV 13800 |
Lead and Lead Alloys - Analysis by Flame Atomic Absorption Spectrometry (FAAS) or Inductively Coupled Plasma Emission Spectrometry (ICP-ES), without Separation of the Lead Matrix |
|
CEN CEN ISO/TR 22648 |
Footwear - Performance requirements for components for footwear - Stiffeners and toepuffs |
|
CEN CEN/TS 15150 |
Solid biofuels - Methods for the determination of particle density |
|
CEN EN 10024 |
Hot Rolled Taper Flange I Sections - Tolerances on Shape and Dimensions-Includes Amendment 1: 12/15/1995 |
|
CEN EN 10152 |
Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
|
CEN EN 10164 |
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
|
CEN EN 10223-6 |
Steel Wire and Wire Products for Fences - Part 6: Steel Wire Chain Link Fencing |
|
CEN EN 10238 |
Automatically Blast-Cleaned and Automatically Prefabrication Primed Structural Steel Products |
|
CEN EN 10240 |
Internal and/or External Protective Coatings for Steel Tubes - Specification for Hot Dip Galvanized Coatings Applied in Automatic Plants |
|
CEN EN 10249-2 |
Cold Formed Sheet Piling of Non Alloy Steels - Part 2: Tolerances on Shape and Dimensions |
|
CEN EN 10252 |
Magnetic Materials - Methods of Measurement of Magnetic Properties of Magnetic Steel Sheet and Strip at Medium Frequencies |
|
CEN EN 10264-1 |
Steel Wire and Wire Products - Steel Wire for Ropes - Part 1: General Requirements |
|
CEN EN 10267 |
Ferritic-Pearlitic Steels for Precipitation Hardening from Hot-Working Temperatures |
|
CEN EN 10307 |
Non-Destructive Testing - Ultrasonic Testing of Austenitic and Austenitic-Ferritic Stainless Steels Flat Products of Thickness Equal to or Greater Than 6 mm (Reflection Method) |
|
CEN EN 1094-1 |
Insulating Refactory Products - Part 1: Terminology for Ceramic Fibre Products |
|
CEN EN 12013 |
Rubber and Plastics Machines - Internal Mixers - Safety Requirements |
|
CEN EN 12150-2 |
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
|
CEN EN 12168 |
Copper and Copper Alloys - Hollow Rod for Free Machining Purposes-Includes Amendment A1: 2000 |
|
CEN EN 12229 |
Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces |
|
CEN EN 12249 |
Sawn Timber Used in Pallets - Permitted Deviations and Guidelines for Dimensions |
|
CEN EN 12258-3 |
Aluminium and aluminium alloys Terms and definitions Part 3: Scrap |
|
CEN EN 12308 |
Installations and Equipment for LNG - Suitability Testing of Gaskets Designed for Flanged Joints Used on LNG Piping |
|
CEN EN 12387 |
Footwear, leather and imitation leather goods manufacturing machines Modular shoe repair equipment Safety requirements |
|
CEN EN 12392 |
Aluminium and Aluminium Alloys - Wrought Products - Special Requirements for Products Intended for the Production of Pressure Equipment |
|
CEN EN 12465 |
Wood Poles for Overhead Lines - Durability Requirements |
|
CEN EN 12851 |
Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiene requirements |
|
CEN EN 13174 |
Cathodic Protection for Harbour Installations |
|
CEN EN 13360 |
Rubber- or plastics-coated fabrics Terminology |
|
CEN EN 13389 |
Food processing machinery Mixers with horizontal shafts Safety and hygiene requirements |
|
CEN EN 13411-2 |
Terminations for Steel Wire Ropes - Safety - Part 2: Splicing of Eyes for Wire Rope Slings |
|
CEN EN 13411-4 |
Terminations for Steel Wire Ropes - Safety - Part 4: Metal and Resin Socketing |
|
CEN EN 13423 |
Compressed Natural Gas Vehicle Operations |
|
CEN EN 13485 |
Thermometers for Measuring the Air and Product Temperature for the Transport, Storage and Distribution of Chilled, Frozen, Deep-Frozen/Quick-Frozen Food and Ice Cream - Tests, Performance, Suitability |
|
CEN EN 13999-2 |
Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds |
|
CEN EN 13999-3 |
Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes |
|
CEN EN 1402-1 |
Unshaped refractory products Part 1: Introduction and classification-Supersedes ENV 1402-1:1994 |
|
CEN EN 14109 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of potassium content by atomic absorption spectrometry |
|
CEN EN 14505 |
Cathodic protection of complex structures |
|
CEN EN 14704-3 |
Determination of the elasticity of fabrics - Part 3: Narrow fabrics |
|
CEN EN 1473 |
Installation and equipment for liquefied natural gas - Design of onshore installations |
|
CEN EN 14870-1 |
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends-ISO 15590-1:2001 modified |
|
CEN EN 14995 |
Plastics - Evaluation of compostability - Test scheme and specifications |
|
CEN EN 1564 |
Founding - Austempered Ductile Cast Irons-Includes Amendment A1:2006 |
|
CEN EN 1652 |
Copper and Copper Alloys - Plate, Sheet, Strip and Circles for General Purposes |
|
CEN EN 1780-2 |
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system |
|
CEN EN 1885 |
Feather and down Terms and definitions-Includes amendment A1:2003 |
|
CEN EN 1918-2 |
Gas Supply Systems - Underground Gas Storage - Part 2: Functional Recommendations for Storage in Oil and Gas Fields |
|
CEN EN 24003 |
Permeable Sintered Metal Materials - Determination of Bubble Test Pore Size (ISO 4003: 1977) |
|
CEN EN 315 |
Plywood - Tolerances for Dimensions |
|
CEN EN 316 |
Wood Fibreboards - Definition, Classification and Symbols |
|
CEN EN 317 |
Particleboards and Fibreboards - Determination of Swelling in Thickness After Immersion in Water |
|
CEN EN 326-2 |
Wood-Based Panels - Sampling, Cutting and Inspection - Part 2: Quality Control in the Factory-Incorporating Corrigendum December 2005 |
|
CEN EN 4001 |
Aerospace series - Aluminium alloy AL-P2024-T351 - Clad sheet and strip with improved chemical milling capability 1,6 mm less than equals to a less than equals to 6mm |
|
CEN EN 572-2 |
Glass in Building - Basic soda lime silicate glass products - Part 2: Float glass |
|
CEN EN 586-3 |
Aluminium and Aluminium Alloys - Forgings - Part 3: Tolerances on Dimensions and Form |
|
CEN EN 603-1 |
Aluminium and Aluminium Alloys - Wrought Forging Stock - Part 1: Technical Conditions for Inspection and Delivery |
|
CEN EN 622-3 |
Fibreboards - Specifications - Part 3: Requirements for medium boards |
|
CEN EN 622-4 |
Fibreboards - Specifications - Part 4: Requirements for Softboards |
|
CEN EN 63 |
Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method |
|
CEN EN 682 |
Elastomeric Seals - Materials Requirements for Seals Used in Pipes an Fittings Carrying Gas and Hydrocarbon Fluids-Includes Amendment A1: August 2005 |
|
CEN EN 755-8 |
Aluminium and Aluminium Alloys - Extruded Rod/Bar, Tube and Profiles - Part 8: Porthole Tubes, Tolerances on Dimensions and Form |
|
CEN EN 821-3 |
Advanced technical ceramics - Monolithic ceramics. Thermophysical properties - Part 3: Determination of specific heat capacity-Supersedes ENV 821-3:1993 |
|
CEN EN 844-2 |
Round and Sawn Timber - Terminology - Part 2: General Terms Relating to Round Timber |
|
CEN EN 844-3 |
Round and Sawn Timber - Terminology - Part 3: General Terms Relating to Sawn Timber |
|
CEN EN 844-4 |
Round and Sawn Timber - Terminology - Part 4: Terms Relating to Moisture Content |
|
CEN EN 993-1 |
Methods of Test for Dense Shaped Refractory Products - Part 1: Determination of Bulk Density, Apparent Porosity and True Porosity |
|
CEN EN 993-12 |
Methods of Test for Dense Shaped Refractory Products - Part 12: Determination of Pyrometric Cone Equivalent (Refactoriness) |
|
CEN EN 993-5 |
Methods of Test for Dense Shaped Refractory Products - Part 5: Determination of Cold Crushing Strength |
|
CEN EN ISO 10426-1 |
Petroleum and Natural Gas Industries - Cements and Materials for Well Cementing - Part 1: Specification-ISO 10426-1:2005 |
|
CEN EN ISO 10724-2 |
Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 2: Small Plates-ISO 10724-2:1998 |
|
CEN EN ISO 11111-2 |
Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines-ISO 11111-2:2005; Supersedes EN ISO 11111:1995 |
|
CEN EN ISO 12156-1 |
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method-ISO 12156-1:2006 |
|
CEN EN ISO 12625-7 |
Tissue paper and tissue products - Part 7: Determination of optical properties |
|
CEN EN ISO 13934-2 |
Textiles - Tensile Properties of Fabrics - Part 2: Determination of Maximum Force Using the Grab Method-ISO 13934-2:1999 |
|
CEN EN ISO 13938-1 |
Textiles - Bursting Properties of Fabrics - Part 1: Hydraulic Method for Determination of Bursting Strength and Bursting Distension-ISO 13938-1:1999 |
|
CEN EN ISO 14129 |
Fibre-Reinforced Plastic Composites - Determination of the in-Plane Shear Stress/Shear Strain Response, Including the in-Plane Shear Modulus and Strength, by the Plus or Minus 45 Degree Tension Test Method-ISO 14129:1997 |
|
CEN EN ISO 14692-1 |
Petroleum and natural gas industries Glass-reinforced plastics (GRP) piping Part 1: Vocabulary, symbols, applications and materials-ISO 14692-1:2002 |
|
CEN EN ISO 14692-3 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design-Incorporating Corrigendum March 2006; ISO 14692-3: 2002 |
|
CEN EN ISO 19901-4 |
Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations-ISO 19901-4: 2003 |
|
CEN EN ISO 21329 |
Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004) |
|
CEN EN ISO 21415-4 |
Wheat and wheat flour - Gluten content - Part 4: Determination of dry gluten from wet gluten by a rapid drying method |
|
CEN EN ISO 2578 |
Plastics - Determination of Time-Temperature Limits After Prolonged Exposure to Heat-ISO 2578:1993 |
|
CEN EN ISO 3651-1 |
Determination of Resistance to Intergranular Corrosion of Stainless Steels - Part 1: Austenitic and Ferritic-Austenitic (Duplex) Stainless Steels - Corrosion Test in Nitric Acid Medium by Measurement of Loss in Mass (Huey Test)-ISO 3651-1:1998 |
|
CEN EN ISO 376 |
Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines-ISO 376:2004 |
|
CEN EN ISO 4507 |
Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test |
|
CEN EN ISO 6603-2 |
Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 2: Instrumented Puncture Test-ISO 6603-2: 2000; Incorporating Corrigendum October 2000 |
|
CEN EN ISO 6807 |
Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification-ISO 6807:2003 |
|
CEN EN ISO 6974-2 |
Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 2: Measuring-System Characteristics and Statistics for Processing of Data-ISO 6974-2: 2001 |
|
CEN EN ISO 7799 |
Metallic Materials - Sheet and Strip 3 mm Thick or Less - Reverse Bend Test-ISO 7799:1985 |
|
CEN EN ISO 846 |
Plastics - Evaluation of the Action of Microorganisms-ISO 846: 1997 |
|
CEN EN ISO 9073-13 |
Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time |
|
CEN EN ISO 9445 |
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form-ISO 9445:2002; Supersedes EN 10258:1997 and EN 10259:1997 |
|
CEN ENV 1090-6 |
Execution of Steel Structures - Part 6: Supplementary Rules for Stainless Steel |
|
CEN ENV 12625-2 |
Tissue Paper and Tissue Products - Part 2: Procedures for Sampling and Conditioning |
|
CEN ENV 14029 |
Lead and Lead Alloys - Analysis by Flame Atomic Absorption Spectrometry (FAAS) or Inductively Coupled Plasma Emission Spectrometry (ICP-ES), After Separation of the Lead Matrix |
|
CEN CEN ISO/TR 20881 |
30152847Footwear - Performance requirements for components for footwear - Insoles |
|
CEN CEN/TR 14745 |
Solid Recovered Fuels |
|
CEN CEN/TR 15119 |
Durability of wood and wood-based products - Estimation of emissions from preservative treated wood to the environment - Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground), and wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method |
|
CEN CEN/TR 15123 |
Design, preparation and application of internal polymer plastering systems |
|
CEN CEN/TR 15138 |
Petroleum products and other liquids Guide to flash point testing |
|
CEN CEN/TR 15160 |
Petroleum and related products - Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) - Information and results on round robin tests |
|
CEN CEN/TR 15351 |
Plastics - Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items |
|
CEN CEN/TR 15367-2 |
Petroleum products - Guide for good housekeeping - Part 2: Automotive petrol fuels |
|
CEN CEN/TR 15508 |
Key properties on solid recovered fuels to be used for establishing a classification system |
|
CEN CEN/TS 13130-12 |
Material and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 12: Determination of 1,3- benzenedimethanamine in food simulants |
|
CEN CEN/TS 13130-13 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 13: Determination of 2,2- bis(4-hydroxyphenyl)propane (Bisphenol A) in food simulants |
|
CEN CEN/TS 13130-14 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 14: Determination of 3,3- bis(3-methyl-4-hydroxyphenyl)-2-indoline in food simulants |
|
CEN CEN/TS 13130-18 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 18: Determination of 1,2- dihydroxybenzene, 1,3-dihydroxybenzene, 1,4- dihydroxybenzene, 4,4'-dihydroxybenzophenone and 4,4'dihydroxybiphenyl in food simulants |
|
CEN CEN/TS 13130-20 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics |
|
CEN CEN/TS 13130-21 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 21: Determination of ethylenediamine and hexamethylenediamine in food simulants |
|
CEN CEN/TS 13130-22 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics |
|
CEN CEN/TS 13130-23 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 23: Determination of formaldehyde and hexamethylenetetramine in food simulants |
|
CEN CEN/TS 13130-27 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 27: Determination of 2,4,6-triamino-1,3,5-triazine in food simulants |
|
CEN CEN/TS 14175-5 |
Fume cupboards - Part 5: Recommendations for installation and maintenance |
|
CEN CEN/TS 14234 |
Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration |
|
CEN CEN/TS 14689 |
Leather - Physical and mechanical tests - Determination of bagginess, creep and relaxation |
|
CEN CEN/TS 14778-1 |
Solid biofuels - Sampling - Part 1: Methods for sampling |
|
CEN CEN/TS 14961 |
Solid biofuels - Fuel specifications and classes |
|
CEN CEN/TS 15083-2 |
Durability of wood and wood-based products Determination of the natural durability of solid wood against wood-destroying fungi, test methods Part 2: Soft rotting micro-fungi |
|
CEN CEN/TS 15148 |
Solid biofuels - Method for the determination of the content of volatile matter |
|
CEN CEN/TS 15234 |
Solid biofuels - Fuel quality assurance |
|
CEN CEN/TS 15297 |
Solid Biofuels - Determination of minor elements |
|
CEN CEN/TS 15400 |
Solid recovered fuels - Methods for the determination of calorific value |
|
CEN CEN/TS 15408 |
Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content |
|
CEN CEN/TS 15414-2 |
Solid recovered fuels - Determination of moisture content using the oven dry method - Part 2: Determination of total moisture by a simplified method |
|
CEN CEN/TS 15443 |
Solid recovered fuels - Methods for laboratory sample preparation |
|
CEN CEN/TS 15534-3 |
Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products |
|
CEN CEN/TS 933-11 |
Dense shaped refractory products Part 11: Determination of resistance to thermal shock-:1997 |
|
CEN EN 10028-5 |
Flat products made of steels for pressure purposes Part 5: Weldable fine grain steels, thermomechanically rolled |
|
CEN EN 1007-3 |
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area-Supersedes ENV 1007-3: 1993 |
|
CEN EN 1007-6 |
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filament at high temperature |
|
CEN EN 10136 |
Chemical Analysis of Ferrous Materials Determination of Nickel in Steels and Irons Flame Atomic Absorption Spectrometric Method |
|
CEN EN 10169-2 |
Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications-: 1999 |
|
CEN EN 1017 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Half-Burnt Dolomite |
|
CEN EN 10188 |
Chemical Analysis of Ferrous Materials Determination of Chromium in Steels and Irons Flame Atomic Absorption Spectrometic Method |
|
CEN EN 10223-5 |
Steel Wire and Wire Products for Fences - Part 5: Steel Wire Woven Hinged Joint and Knotted Mesh Fencing |
|
CEN EN 10244-1 |
Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 1: General Principles-Incorporating Corrigendum April 2001 |
|
CEN EN 10246-15 |
Non-Destructive Testing of Steel Tubes - Part 15: Automatic Ultrasonic Testing of Strip/Plate Used in the Manufacture of Welded Steel Tubes for the Detection of Laminar Imperfections |
|
CEN EN 10284 |
Malleable Cast Iron Fittings with Compression Ends for Polyethylene (PE) Piping Systems |
|
CEN EN 10300 |
Steel tubes and fittings for onshore and offshore Pipelines - Bituminous hot applied materials for external coating |
|
CEN EN 10301 |
Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
|
CEN EN 10303 |
Thin Magnetic Steel Sheet and Strip for Use at Medium Frequencies-Ratified European Text |
|
CEN EN 10340 |
Steel castings for structural uses |
|
CEN EN 1071-3 |
Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test-Supersedes ENV 1071-3: 1994 |
|
CEN EN 1084 |
Plywood - Formaldehyde Release Classes Determined by the Gas Analysis Method |
|
CEN EN 1094-2 |
Insulating Refractory Products - Part 2: Classification of Shaped Products-ISO 2245:1990 Modified |
|
CEN EN 1094-6 |
Insulating Refractory Products - Part 6: Determination of Permanent Change in Dimensions of Shaped Products on Heating-ISO 2477:1987 Modified |
|
CEN EN 1104 |
Paper and Board Intended to Come into Contact with Foodstuffs - Determination of Transfer of Antimicrobic Constituents |
|
CEN EN 1128 |
Cement-Bonded Particleboards - Determination of Hard Body Impact Resistance |
|
CEN EN 1142 |
Fruit and Vegetable Juices - Determination of the Sulfate Content |
|
CEN EN 118 |
Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method) |
|
CEN EN 1186-4 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 4: Test Methods for Overall Migration into Olive Oil by Cell-Supersedes ENV 1186-4: 1994 |
|
CEN EN 1186-7 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 7: Test Methods for Overall Migration into Aqueous Food Simulants Using a Pouch-Supersedes ENV 1186-7: 1994 |
|
CEN EN 1186-9 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 9: Test Methods for Overall Migration into Aqueous Food Simulants by Article Filling-Supersedes ENV 1186-9: 1994 |
|
CEN EN 120 |
Wood Based Panels - Determination of Formaldehyde Content - Extraction Method Called the Perforator Method |
|
CEN EN 12014-7 |
Foodstuffs - Determination of Nitrate and/or Nitrite Content - Part 7: Continuous Flow Method for the Determination of Nitrate Content of Vegetables and Vegetable Products After Cadmium Reduction |
|
CEN EN 12023 |
Self Adhesive Tapes - Measurement of Water Vapour Transmission in a Warm Humid Atmosphere |
|
CEN EN 12024 |
Self Adhesive Tapes - Measurement of Resistance to Elevated Temperature and Humidity |
|
CEN EN 1204 |
Chemicals used for treatment of water intended for human consumption - Calcium tetrahydrogen bis(orthophosphate) |
|
CEN EN 12065 |
Installations and Equipment for Liquefied Natural Gas - Testing of Foam Concentrates Designed for Generation of Medium and High Expansion Foam and of Extinguishing Powders Used on Liquefied Natural Gas Fires |
|
CEN EN 1210 |
Chemicals used for treatment of water intended for human consumption - Sodium tripolyphosphate |
|
CEN EN 12105 |
Resilient Floor Coverings - Determination of Moisture Content of Agglomerated Composition Cork |
|
CEN EN 12126 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Liquid Ammonia |
|
CEN EN 12131 |
Feather and Down - Test Methods - Determination of the Quantitative Composition of Feather and Down (Manual Method) |
|
CEN EN 12137 |
Fruit and Vegetable Juices - Determination of Tartaric Acid in Grape Juices - Method by High Performance Liquid Chromatography |
|
CEN EN 1218-5 |
Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or fed by chain-Incorporating corrigendum December 2006 |
|
CEN EN 12332-1 |
Rubber- or Plastics-Coated Fabrics - Determination of Bursting Strength - Part 1: Steel Ball Method |
|
CEN EN 12373-1 |
Aluminium and Aluminium Alloys - Anodizing - Part 1: Method for Specifying Decorative and Protective Anodic Oxidation Coatings on Aluminium |
|
CEN EN 12373-12 |
Aluminium and Aluminium Alloys - Anodizing - Part 12: Measurement of Reflectance Characteristics of Aluminium Surfaces Using Integrating-Sphere Instruments |
|
CEN EN 12373-14 |
Aluminium and Aluminium Alloys - Anodizing - Part 14: Visual Determination of Image Clarity of Anodic Oxidation Coatings - Chart Scale Method |
|
CEN EN 12373-3 |
Aluminium and Aluminium Alloys - Anodizing - Part 3: Determination of Thickness of Anodic Oxidation Coatings - Non-Destructive Measurement by Split-Beam Microscope-Ratified European Text |
|
CEN EN 12373-7 |
Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment |
|
CEN EN 12373-8 |
Aluminium and Aluminium Alloys - Anodizing - Part 8: Determination of the Comparative Fastness to Ultra-Violet Light and Heat of Coloured Anodic Oxidation Coatings-Ratified European Text |
|
CEN EN 12373-9 |
Aluminium and Aluminium Alloys - Anodizing - Part 9: Measurement of Wear Resistance and Wear Index of Anodic Oxidation Coatings Using an Abrasive Wheel Wear Test Apparatus-Ratified European Text |
|
CEN EN 12385-6 |
Steel wire ropes Safety Part 6: Stranded ropes for mine shafts |
|
CEN EN 12385-8 |
Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
|
CEN EN 12393-2 |
Non-Fatty Foods - Multiresidue Methods for the Gas Chromatographic Determination of Pesticide Residues - Part 2: Methods for Extraction and Clean-Up-Ratified European Text |
|
CEN EN 12396-1 |
Non-Fatty Foods - Determination of Dithiocarbamate and Thiuram Disulfide Residues - Part 1: Spectrometric Method-Ratified European Text |
|
CEN EN 1240 |
Adhesives - Determination of Hydroxyl Value and/or Hydroxyl Content |
|
CEN EN 1243 |
Adhesives - Determination of Free Formaldehyde in Amino and Amidoformaldehyde Condensates |
|
CEN EN 12447 |
Geotextiles and Geotextile-Related Products - Screening Test Method for Determining the Resistance to Hydrolysis in Water-Supersedes ENV 12447:1997 |
|
CEN EN 1245 |
Adhesives - Determination of pH - Test Method-Ratified European Text |
|
CEN EN 12450 |
Copper and Copper Alloys - Seamless, Round Copper Capillary Tubes |
|
CEN EN 12451 |
Copper and Copper Alloys - Seamless, Round Tubes for Heat Exchangers |
|
CEN EN 1246 |
Adhesives - Determination of Ash and Sulphated Ash |
|
CEN EN 12463 |
Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
|
CEN EN 12475-2 |
Classification of Dense Shaped Refractory Products - Part 2: Basic Products Containing Less Than 7% Residual Carbon |
|
CEN EN 12498 |
Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of cadmium and lead in an aqueous extract-Supersedes ENV 12498: 1998 |
|
CEN EN 12501-2 |
Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials |
|
CEN EN 12510 |
Wood poles for overhead lines - Strength grading criteria-Incorporating corrigendum July 2002 |
|
CEN EN 12514-2 |
Installations for Oil Supply Systems for Oil Burners - Part 2: Safety Requirements and Tests; Parts, Valves, Pipes, Filters, Oil De-Aerators, Meters |
|
CEN EN 12548 |
Lead and Lead Alloys - Lead Alloy Ingots for Electric Cable Sheathing and for Sleeves |
|
CEN EN 12562 |
Textiles - Para-Aramid Multifilament Yarns - Test Methods |
|
CEN EN 12608 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods |
|
CEN EN 1261 |
Fibre Ropes for General Service - Hemp |