|
CEN EN 12630 |
Fruit and Vegetable Juices - Determination of Glucose, Fructose, Sorbitol and Sucrose Contents - Method Using High-Performance Liquid Chromatography |
|
CEN EN 12653 |
Footwear, Leather and Imitation Leather Manufacturing Machines - Nailing Machines - Safety Requirements |
|
CEN EN 12672 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Potassium Permanganate |
|
CEN EN 12678 |
Chemicals Used for Treatment of Water Intened for Human Consumption - Potassium Peroxomonosulfate |
|
CEN EN 1269 |
Textile Floorcoverings - Assessment of Impregnations in Needled Floorcoverings by Means of a Soiling Test |
|
CEN EN 12696 |
Cathodic Protection of Steel in Concrete |
|
CEN EN 12702 |
Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Determination of Blocking Behaviour Adhesive Layers |
|
CEN EN 12704 |
Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Determination of Foam Formation for Aqueous Adhesives |
|
CEN EN 12728 |
Surace Active Agents - Determination of Foaming Power - Perforated Disc Beating Method |
|
CEN EN 12748 |
Footwear - Test Methods for Outsoles, Insoles, Lining and Insocks - Water Soluble Content |
|
CEN EN 12751 |
Textiles - Sampling of Fibres, Yarns and Fabrics for Testing |
|
CEN EN 12770 |
Footwear - Test Methods for Outsoles - Abrasion Resistance |
|
CEN EN 12772 |
Footwear - Test Methods for Outsoles - Dimensional Stability |
|
CEN EN 12781 |
WallCoverings - Specification for Cork Panels |
|
CEN EN 12782 |
Footwear - Test Methods for Insoles - Resistance to Stitch Tear |
|
CEN EN 12784 |
Footwear - Test Methods for Whole Shoe - Thermal Insulation |
|
CEN EN 12785 |
Footwear - Test Methods for Whole Shoe - Heel Attachment |
|
CEN EN 12788 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength |
|
CEN EN 1279-3 |
Glass in building Insulating glass units Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances |
|
CEN EN 12800 |
Footwear - Test Methods for Insoles - Dimensional Stability |
|
CEN EN 12808-1 |
Adhesives and Grouts for Tiles - Part 1: Determination of Chemical Resistance of Reaction Resin Mortars |
|
CEN EN 12823-2 |
Foodstuffs - Determination of Vitamin A by High Performance Liquid Chromatography - Part 2: Measurement of Beta Ray-Carotene |
|
CEN EN 12853 |
Food Processing Machinery - Hand-Held Blenders and Whisks - Safety and Hygiene Requirements |
|
CEN EN 12875-1 |
Mechanical dishwashing resistance of utensils - Part 1: Reference test method for domestic articles-:1998 |
|
CEN EN 1288-1 |
Glass in Building - Determination of the Bending Strength of Glass - Part 1: Fundamentals of Testing Glass |
|
CEN EN 1288-4 |
Glass in Building - Determination of the Bending Strength of Glass - Part 4: Testing of Channel Shaped Glass |
|
CEN EN 12893 |
Copper and Copper Alloys - Determination of Spiral Elongation Number |
|
CEN EN 12898 |
Glass in Building - Determination of the Emissivity |
|
CEN EN 12903 |
Products used for treatment of water intended for human consumption - Powdered activated carbon |
|
CEN EN 12904 |
Products used for treatment of water intended for human consumption Silica sand and silica gravel |
|
CEN EN 12909 |
Products Used for Treatment of Water Intended for Human Consumption - Anthracite |
|
CEN EN 12915-2 |
Products used for the treatment of water intended for human consumption Granular activated carbon Part 2: Reactivated granular activated carbon |
|
CEN EN 12933 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Chemicals for Emergency Use - Trichloroisocyanuric Acid |
|
CEN EN 12980 |
Materials and Articles in Contact with Foodstuffs - Non-Metallic Articles for Catering and Industrial Use - Method of Test for the Determination of Impact Resistance |
|
CEN EN 12984 |
Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements |
|
CEN EN 13002-2 |
Carbon Fibre Yarns - Part 2: Test Methods and General Specifications |
|
CEN EN 1301-2 |
Aluminium and Aluminium Alloys - Drawn Wire - Part 2: Mechanical Properties |
|
CEN EN 13042-1 |
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder |
|
CEN EN 13086 |
Lead and Lead Alloys - Lead Oxides |
|
CEN EN 13088 |
Manufactured Articles Filled with Feather and Down - Method for the Determination of a Filled Product´s Total Mass and of the Mass of the Filling |
|
CEN EN 13113 |
Tannery Machines - Roller Coating Machines - Safety Requirements |
|
CEN EN 1315-1 |
Dimensional Classification - Part 1: Hardwood Round Timber |
|
CEN EN 1316-1 |
Hardwood Round Timber - Qualitative Classification; Part 1: Oak and Beech |
|
CEN EN 1316-3 |
Hardwood Round Timber - Qualitative Classification Part 3: Ash and Maples and Sycamore |
|
CEN EN 13183-2 |
Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method-Incorporating corrigendum September 2003 |
|
CEN EN 13191-1 |
Non-Fatty Food - Determination of Bromide Residues - Part 1: Determination of Total Bromide as Inorganic Bromide |
|
CEN EN 13196 |
Fruit and Vegetable Juices - Determination of Total Sulfur Dioxide by Distillation |
|
CEN EN 13226 |
Wood flooring Solid parquet elements with grooves and/or tongues |
|
CEN EN 1324 |
Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives |
|
CEN EN 13256 |
Geotextiles and Geotextile-Related Products - Characteristics Required for Use in the Construction of Tunnels and Underground Structures-Incorporating Corrigendum September 2003; Includes amendment A1:2005 |
|
CEN EN 13257 |
Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals-Incorporating Corrigendum September 2003; Includes Amendment A1:2005 |
|
CEN EN 13267 |
Surface Active Agents - Determination of Water Content - Karl Fischer Method |
|
CEN EN 13307-1 |
Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements |
|
CEN EN 13335 |
Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method |
|
CEN EN 13402-2 |
Size Designation of Clothes - Part 2: Primary and Secondary Dimensions |
|
CEN EN 13415 |
Adhesives - Test of Adhesives for Floor Coverings - Determination of the Electrical Resistance of Adhesive Films |
|
CEN EN 13473-1 |
Reinforcement - Specifications for Multi-Axial Multi-Ply Fabrics - Part 1: Designation |
|
CEN EN 13518 |
Footwear - Test methods for uppers - Water resistance-Includes amendment A1:2005 |
|
CEN EN 13521 |
Footwear - Test Methods for Uppers, Lining and Insocks - Thermal Insulation |
|
CEN EN 13541 |
Glass in Building - Security Glazing - Testing and Classification of Resistance Against Explosion Pressure |
|
CEN EN 1360 |
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification-:1996 |
|
CEN EN 13616 |
Overfill prevention devices for static tanks for liquid petroleum fuels-Incorporating Corrigendum January 2006 |
|
CEN EN 13617-2 |
Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
|
CEN EN 13630-6 |
Explosives for civil uses - Detonating cords and safety fuses - Part 6: Determination of resistance to tension of detonating cords |
|
CEN EN 13631-15 |
Explosives for civil uses - High explosives - Part 15: Calculation of thermodynamic properties |
|
CEN EN 13631-6 |
Explosives for civil uses - High explosives - Part 6: Determination of resistance to hydrostatic pressure |
|
CEN EN 13645 |
Installations and Equipment for Liquefied Natural Gas - Design Onshore Installations with a Storage Capacity between 5 t an 200 t |
|
CEN EN 13677-1 |
Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation |
|
CEN EN 1372 |
Adhesives - Test Method for Adhesives for Floor and Wall Coverings - Peel Test |
|
CEN EN 1373 |
Adhesives - Test Method for Adhesives for Floor and Wall Coverings - Shear Test |
|
CEN EN 13733 |
Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Determination of the Durability of Structural Bonding Agents |
|
CEN EN 13758-1 |
Textiles - Solar UV Protective Properties - Part 1: Method of Test for Apparel Fabrics-Incorporates Amendment A1 |
|
CEN EN 13763-3 |
Explosives for civil uses Detonators and relays Part 3: Determination of sensitiveness to impact |
|
CEN EN 13770 |
Textiles - Determination of the Abrasion Resistance of Knitted Footwear Garments |
|
CEN EN 13783 |
Foodstuffs - Detection of Irradiated Food Using Direct Epifluorscent Filter Technique/Aerobic Plate Count (DEFT/APC) - Screening Method |
|
CEN EN 1379 |
Foodstuffs - Determination of Cyclamate and Saccharin in Liquid Table Top Sweetener Preparations - Method by High Performance Liquid Chromatography |
|
CEN EN 13810-1 |
Wood-based panels Floating floors Part 1: Performance specifications and requirements-(V) |
|
CEN EN 1382 |
Timber Structures - Test Methods - Withdrawal Capacity of Timber Fasterners |
|
CEN EN 13854 |
Manufactured articles solely filled with feather and down Requirements for upholstered parts and cushions |
|
CEN EN 13857-3 |
Explosives for civil uses - Part 3: Information to be provided by the manufacturer or his authorised representative to the user |
|
CEN EN 13895 |
Textiles Monofilaments Determination of tensile properties |
|
CEN EN 13900-2 |
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling |
|
CEN EN 13900-3 |
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling |
|
CEN EN 13920-10 |
Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of used aluminium beverage cans |
|
CEN EN 13920-13 |
Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys |
|
CEN EN 13920-15 |
Aluminium and aluminium alloys Scrap Part 15: Decoated aluminium scrap from post-consumer aluminium packagings |
|
CEN EN 13920-16 |
Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics |
|
CEN EN 13920-2 |
Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap |
|
CEN EN 13920-3 |
Aluminium and aluminium alloys Scrap Part 3: Wire and cable scrap |
|
CEN EN 13920-8 |
Aluminium and aluminium alloys Scrap Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes |
|
CEN EN 13938-1 |
Explosives for civil uses - Propellants and rocket propellants - Part 1: Requirements-Incorporating corrigendum May 2006 |
|
CEN EN 1396 |
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
|
CEN EN 14035-15 |
Fireworks Part 15: Fountains Specification and test methods-Incorporating corrigendum January 2005 |
|
CEN EN 14035-19 |
Fireworks Part 19: Hand-held sparklers - Specification and test methods |
|
CEN EN 14035-21 |
Fireworks - Part 21: Jumping ground spinners - Specification and test methods |
|
CEN EN 14035-33 |
Fireworks Part 33: Spinners Specification and test methods |
|
CEN EN 14035-5 |
Fireworks - Part 5: Batteries and combinations - Specification and test methods |
|
CEN EN 14056 |
Laboratory furniture - Recommendations for design and installation |
|
CEN EN 14065 |
Textiles - Laundry processed textiles - Biocontamination control system |
|
CEN EN 14081-2 |
Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing-Supersedes EN 518: 1995 and EN 519: 1995 |
|
CEN EN 14086 |
Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method |
|
CEN EN 1409 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Polyamines |
|
CEN EN 14119 |
Testing of textiles Evaluation of the action of microfungi |
|
CEN EN 14125 |
Thermoplastic and flexible metal pipework for underground installation at petrol filling stations-Includes Amd A1: November 2006 |
|
CEN EN 14130 |
Foodstuffs - Determination of vitamin C by HPLC |
|
CEN EN 1414 |
Touch-and-Close Fasteners - Cycling Procedure for Subsequent Testing-Includes Amendment A1: March 2000 |
|
CENELEC EN 14141 |
Valves for natural gas transportation in pipelines Performance requirements and tests |
|
CEN EN 1416 |
Touch-and-Close Fasteners - Determination of Curvature |
|
CEN EN 14175-6 |
Fume cupboards - Part 6: Variable air volume fume cupboards |
|
CEN EN 1421 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Ammonium Chloride |
|
CEN EN 14213 |
Heating fuels - Fatty acid methyl esters (FAME) - Requirements and test methods-Incorporates corrigendum December 2003 |
|
CEN EN 14251 |
Structural round timber - Test methods |
|
CEN EN 14256 |
Adhesives for non-structural wood applications - Test method and requirements for resistance to static load |
|
CEN EN 14257 |
Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91) |
|
CEN EN 14288 |
Leather - Physical and mechanical tests - Determination of fogging characteristics |
|
CEN EN 14342 |
Wood flooring Characteristics, evaluation of conformity and marking-Incorporating corrigendum: July 2007 |
|
CEN EN 14370 |
Surface active agents - Determination of surface tension |
|
CEN EN 14392 |
Aluminium and aluminium alloys - Requirements for anodised products for use in contact with foodstuff |
|
CEN EN 14410 |
Self adhesive tapes - Measurement of breaking strength and elongation at break |
|
CEN EN 14449 |
Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard |
|
CEN EN 1447 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of Long-Term Resistance to Internal Pressure |
|
CEN EN 14470-2 |
Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders |
|
CEN EN 14510 |
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
|
CEN EN 14576 |
Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking |
|
CEN EN 14663 |
Foodstuffs Determination of vitamin B6 (including its glycosylated forms) by HPLC |
|
CEN EN 14667 |
Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method |
|
CEN EN 14669 |
Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method |
|
CEN EN 14678-1 |
LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
|
CEN EN 14681 |
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
|
CEN EN 14713 |
Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding |
|
CEN EN 14719 |
Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction |
|
CEN EN 1474 |
Installation and Equipment for Liquefied Natural Gas - Design and Testing of Loading/Unloading Arms |
|
CEN EN 14783 |
Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements |
|
CEN EN 14878 |
Textiles - Burning behaviour of children's nightwear - Specification |
|
CEN EN 14881 |
Surface active agents - Determination of N-(3- dimethylaminopropyl)-alkylamide content in alkylamidopropylbetaines - Gas-chromatographic method |
|
CEN EN 14882 |
Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction |
|
CEN EN 14933 |
Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification |
|
CEN EN 14934 |
Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification |
|
CEN EN 14939 |
Copper and copper alloys - Determination of beryllium content - FAAS method |
|
CEN EN 14941 |
Copper and copper alloys - Determination of cobalt content - FAAS method |
|
CEN EN 14957 |
Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements |
|
CEN EN 14970 |
Textiles - Knitted fabrics - Determination of stitch length and yarn linear density in weft knitted fabrics |
|
CEN EN 15024-2 |
Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometry method (FAAS) |
|
CEN EN 15154-2 |
Emergency safety showers - Part 2: Plumbed-in eye wash units |
|
CEN EN 1532 |
Installation and Equipment for Liquefied Natural Gas - Ship to Shore Interface |
|
CEN EN 1533 |
Wood and Parquet Flooring - Determination of Bending Properties - Test Methods |
|
CEN EN 15344 |
Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
|
CEN EN 15346 |
Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates |
|
CEN EN 15348 |
Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates |
|
CEN EN 1541 |
Paper and Board Intended to Come into Contact with Foodstuffs - Determination of Formaldehyde in an Aqueous Extract |
|
CEN EN 15416-5 |
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time |
|
CEN EN 15470 |
Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method |
|
CEN EN 1592-1 |
Aluminium and Aluminium Alloys - HF Seam Welded Tubes - Part 1: Technical Conditions for Inspection and Delivery |
|
CEN EN 1612-1 |
Rubber and Plastics Machines - Reaction Moulding Machines - Part 1: Safety Requirements for Metering and Mixing Units |
|
CEN EN 1612-2 |
Rubber and Plastics Machines - Reaction Moulding Machines Part 2: Safety Requirements for Reaction Moulding Plant |
|
CEN EN 1657 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1)-Incorporates Corrigendum: March 2007 |
|
CEN EN 1669 |
Aluminium and Aluminium Alloys - Test Methods - Earing Test for Sheet and Strip |
|
CEN EN 1715-3 |
Aluminium and Aluminium Alloys - Drawing Stock - Part 3: Specific Requirements for Mechanical Uses (Excluding Welding) |
|
CEN EN 1720 |
Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Determination of Dispersability |
|
CEN EN 1744-1 |
Tests for Chemical Properties of Aggregates - Part 1: Chemical Analysis |
|
CEN EN 1753/AC |
Magnesium and Magnesium Alloys - Magnesium Alloy Ingots and Castings-Ratified European Text; Incorporates Corrigendum November 1997 |
|
CEN EN 1773 |
Textile - Fabrics - Determination of Width and Length |
|
CEN EN 1814 |
Textile Floor Coverings - Determination of Resistance to Damage at Cut Edges Using the Modified Vettermann Drum Test |
|
CEN EN 1870-11 |
Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)-Incorporating Corrigendum: December 2006 |
|
CEN EN 1870-7 |
Safety of Woodworking Machines - Circular Sawing Machines - Part 7: Single Blade Log Sawing Machines with Integrated Feed Table and Manual Loading and/or Unloading-Ratified European Text |
|
CEN EN 1870-9 |
Safety of Woodworking Machines - Circular Sawing Machines - Part 9: Double Blade Circular Sawing Machines for Cross-Cutting with Integrated Feed and with Manual Loading and/or Unloading |
|
CEN EN 1882 |
Feather and Down - Test Methods - Determination of the Commercial Mass of a Lot of Feather and Down-Ratified European Text |
|
CEN EN 1896 |
Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Determination of Tensile Strength and Elongation |
|
CEN EN 1902 |
Adhesives - Test Method for Adhesives for Floor Coverings and Wall Coverings - Shear Creep Test |
|
CEN EN 1910 |
Wood and Parquet Flooring and Wood Panelling and Cladding - Determination of Dimensional Stability |
|
CEN EN 1918-1 |
Gas Supply Systems - Underground Gas Storage - Part 1: Functional Recommendations for Storage in Aquifers |
|
CEN EN 1918-4 |
Gas Supply Systems - Underground Gas Storage - Part 4: Functional Recommendations for Storage in Rock Caverns |
|
CEN EN 1944 |
Self Adhesive Tapes - Measurement of Unwind Adhesion at Low Speed |
|
CEN EN 1988-2 |
Foodstuffs - Determination of Sulfite - Part 2: Enzymatic Method |
|
CEN EN 20105- C01 |
Textiles - Tests for Colour Fastness Part C01 : Colour Fastness to Washing: Test 1 (ISO 105-C01 : 1989) |
|
CEN EN 20105-A03 |
Textiles - Tests for Colour Fastness - Part A03: Grey Scale for Assessing Staining (ISO 105-A03:1993) |
|
CEN EN 20105-C04 |
Textiles - Tests for Colour Fastness - Part C04 : Colour Fastness to Washing - Test |
|
CEN EN 20811 |
Textiles - Determination of Resistance to Water Penetration - Hydrostatic Pressure Test |
|
CEN EN 22313 |
Textile Fabrics - Determination of the Recovery from Creasing of a Horizontally Folded Specimen by Measuring the Angle of Recovery |
|
CEN EN 24497 |
Metallic Powders - Determination of Particle Size by Dry Sieving (ISO 4497: 1983) |
|
CEN EN 24943 |
Chemical Analysis of Ferrous Metal - Determination of Copper Content - Flame Atomic Absorption Spectrometric Method |
|
CEN EN 263 |
Crosslinked Cast Acrylic Sheet for Baths and Shower Trays for Domestic Purposes |
|
CEN EN 278 |
Rubber Materials for Diaphragms in Domestic Appliances Using Combustible Gases up to 200 mbar |
|
CEN EN 27963 |
Welds in Steel - Calibration Block No. 2 for Ultrasonic Examination of Welds |
|
CEN EN 301 |
Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
|
CEN EN 302-4 |
Adhesives for Load-Bearing Timber Structures - Test Methods - Part 4: Determination of the Effects of Wood Shrinkage on the Shear Strength |
|
CEN EN 310 |
Wood-Based Panels - Determination of Modulus of Elasticity in Bending and of Bending Strength |
|
CEN EN 319 |
Particleboards and Fibreboards - Determination of Tensile Strength Perpendicular to the Plane of the Board |
|
CEN EN 320 |
Fibreboards - Determination of Resistance to Axial Withdrawal of Screws |
|
CEN EN 322 |
Wood-Based Panels - Determination of Moisture Content |
|
CEN EN 335-3 |
Durability of Wood and Wood-Based Products - Definition of Hazard Classes of Biological Attack - Part 3: Application to Wood- Based Panels |
|
CEN EN 351-2 |
Durability of wood and wood-based products - Preservativetreated solid wood - Part 2: Guidance on sampling for the analysis of preservative-treated wood |
|
CEN EN 356 |
Glass in Building - Security Glazing - Testing and Classification of Resistance Against Manual Attack |
|
CEN EN 387 |
Glued Laminated Timber - Large Finger Joints - Performance Requirements and Minimum Production Requirements-Supersedes ENV 386: 1999 |
|
CEN EN 40-5 |
Lighting Columns - Part 5: Requirements for Steel Lighting Columns |
|
CEN EN 438(PART 2) |
Decorative High-Pressure Laminates (HPL)- Sheets Based on Thermosetting Resins-Part 2: Determination of Properties-Superseded by EN 438-1:01/2005, EN 438-3:01/2005 and EN 438-4:01/2005 |
|
CEN EN 438-4 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates-Supersedes EN 438-1:1991 and EN 438-2:1991 |
|
CEN EN 454 |
Food Processing Machinery - Planetary Mixers - Safety and Hygiene Requirements |
|
CEN EN 486 |
Aluminium and Aluminium Alloys - Extrusion Ingots - Specifications |
|
CEN EN 49-1 |
Wood Preservatives - Determination of the Protective Effectiveness Against Anobium Punctatum (De Geer) by Egg-Laying and Larval Survival - Part 1: Application by Surface Treatment (Laboratory Method) |
|
CEN EN 508-1 |
Roofing Products from Metal Sheet - Specification for Self-Supporting Products of Steel, Aluminium or Stainless Steel Sheet - Part 1: Steel |
|
CEN EN 522 |
Adhesives for Leather and Footwear Materials - Bond Strength - Minimum Requirements and Adhesive Classification-Ratified European Text |
|
CEN EN 524-4 |
Steel Strip Sheaths for Prestressing Tendons - Test Methods Part - 4: Determination of Lateral Load Resistance |
|
CEN EN 599-1 |
Durability of Wood and Wood-Based Products - Performance of Preventive Wood Preservatives as Determined by Biological Tests - Part 1: Specification According to Hazard Class |
|
CEN EN 599-2 |
Durability of Wood and Wood-Based Products - Performance of Preventive Wood Preservatives as Determined by Biological Tests - Part 2: Classification and Labelling |
|
CEN EN 602 |
Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff |
|
CENELEC EN 61340-4-1 |
Electrostatics Part 4-1: Standard test methods for specific applications Electrical resistance of floor coverings and installed floors-IEC 61340-4-1:2003 |
|
CEN EN 623-3 |
Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 3: Determination of Grain Size and Size Distribution (Characterized by the Liner Intercept Method)-Supersedes ENV 623-3:1993 |
|
CEN EN 644 |
Paper - Untrimmed Sizes - Primary Range and Supplementary Range Designation and Tolerances, Expression of Direction of Manufacture |
|
CEN EN 645 |
Paper and Board Intended to Come into Contact with Foodstuffs - Preparation of a Cold Water Extract |
|
CEN EN 683-1 |
Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery |
|
CEN EN 725-12 |
Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 12: Chemical Analysis of Zirconia |
|
CEN EN 754-1 |
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 1: Technical Conditions for Inpection and Delivery |
|
CEN EN 820-1 |
Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 1: Determination of flexural strength at elevated temperatures-Supersedes ENV 820-1: 1993 |
|
CEN EN 843-5 |
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis |
|
CEN EN 844-10 |
Round and Sawn Timber - Terminology - Part 10: Terms Relating to Stain and Fungal Attack |
|
CEN EN 844-11 |
Round and Sawn Timber - Terminology - Part 11: Terms Relating to Degrade by Insects |
|
CEN EN 852-1 |
Plastics Piping Systems for the Transport of Water Intended for Human Consumption - Migration Assessment - Part 1: Determination of Migration Values of Plastics Pipes |
|
CEN EN 860 |
Safety of Woodworking Machines - One Side Thickness Planing Machines |
|
CEN EN 861 |
Safety of Woodworking Machines - Surface Planing and Thicknessing Machines |
|
CEN EN 897 |
Chemicals used for treatment of water intended for human consumption - Sodium carbonate |
|
CEN EN 901 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Hypochlorite |
|
CEN EN 975-2 |
Sawn timber - Appearance grading of hardwoods - Part 2: Poplars |
|
CEN EN 985 |
Textile Floor Coverings - Castor Chair Test |
|
CEN EN ISO 10101-1 |
Natural Gas - Determination of Water by the Karl Fischer Method - Part 1: Introduction-ISO 10101-1: 1993 |
|
CEN EN ISO 10321 |
Geotextiles - Tensile Test for Joints/Seams by Wide-Width Method (ISO 10321 : 1992) |
|
CEN EN ISO 10438-4 |
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems |
|
CEN EN ISO 10504 |
Starch Derivatives - Determination of the Composition of Glucose Syrups, Fructose Syrups and Hydrogenated Glucose Syrups - Method Using High-Performance Liquid Chromatography-ISO 10504:1998 |
|
CEN EN ISO 105-A06 |
Textiles - Tests for Colour Fastness - Part A06: Instrumental Determination of 1/1 Standard Depth of Colour-ISO 105-A06: 1995 |
|
CEN EN ISO 105-B01 |
Textiles - Tests for Colour Fastness - Part B01: Colour Fastness to Light: Daylight-ISO 105-B01: 1994, Including Amendment 1: 1998 |
|
CEN EN ISO 105-C07 |
Textiles - Tests for Colour Fastness - Part C07: Colour Fastness to Wet Scrubbing of Pigment Printed Textiles-ISO 105-C07:1999 |
|
CEN EN ISO 105-C08 |
Textiles - Tests for colour fastness - Part C08: colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator-ISO 105-C08:2001 |
|
CEN EN ISO 105-C09 |
Textiles - Tests for colour fastness - Part C09: Colour fastness to domestic and commercial laundering - Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator-Incorporates Amendment A1: 08/2007 |
|
CEN EN ISO 105-E01 |
Textiles Tests for colour fastness Part E01: Colour fastness to water-ISO 105-E01:1994 |
|
CEN EN ISO 105-E03 |
Textiles - Tests for Colour Fastness Part E03: Colour Fastness to Chlorinated Water (Swimming-Pool Water)-ISO 105-E03 : 1994 |
|
CEN EN ISO 105-E06 |
Textiles - Tests for Colour Fastness - Part E06: Colour Fastness to Spotting: Alkali-ISO 105-E06: 2006 |
|
CEN EN ISO 105-E13 |
Textiles - Tests for Colour Fastness - Part E13: Colour Fastness to Acid-Felting: Severe-ISO 105-E13: 1994 |
|
CEN EN ISO 105-J01 |
Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface Colour-ISO 105-J01: 1997 |
|
CEN EN ISO 105-S02 |
Textiles - Tests for Colour Fastness - Part S02: Colour Fastness to Vulcanization: Sulfur Monochloride (ISO 105-S02 : 1993) |
|
CEN EN ISO 105-X05 |
Textiles - Tests for Colour Fastness - Part X05: Colour Fastness to Organic Solvents-ISO 105-X05: 1994 |
|
CEN EN ISO 105-X12 |
Textiles Tests for colour fastness Part X12: Colour fastness to rubbing-ISO 105-X12: 2001 |
|
CEN EN ISO 105-Z02 |
Textiles - Tests for Colour Fastness - Part Z02: Colour Fastness to Metals in the Dyebath: Iron and Copper (ISO 105-Z02 : 1993) |
|
CEN EN ISO 105-Z06 |
Textiles - Tests for Colour Fastness - Part Z06: Evaluation of Dye and Pigment Migration-ISO 105-Z06:1998 |
|
CEN EN ISO 105-Z10 |
Textiles - Tests for Colour Fastness - Part Z10: Determination of Relative Colour Strength of Dyes in Solution-ISO 105-Z10:1997 |
|
CEN EN ISO 1060-1 |
Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Part 1: Designation System and Basis for Specifications-ISO 1060-1:1998 |
|
CEN EN ISO 1061 |
Plastics - Unplasticized Cellulose Acetate - Determination of Free Acidity-ISO 1061:1990 |
|
CEN EN ISO 11111-6 |
Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery-ISO 11111-6:2005; Supersedes EN ISO 11111:1995 |
|
CEN EN ISO 11306 |
Corrosion of Metals and Alloys - Guidelines for Exposing and Evaluating Metals and Alloys in Surface Sea Water-ISO 11306:1998 |
|
CEN EN ISO 11358 |
Plastics - Thermogravimetry (TG) of Polymers - General Principles-ISO 11358: 1997 |
|
CEN EN ISO 11378-2 |
Textile Floor Coverings - Laboratory Soiling Tests - Part 2: Drum Test-ISO 11378-2:2001 |
|
CEN EN ISO 11401 |
Plastics - Phenolic Resins - Separation by Liquid Chromatography-ISO 11401:1993 |
|
CEN EN ISO 11403-1 |
Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties-ISO 11403-1:2001 |
|
CEN EN ISO 1141 |
Fibre ropes - Polyester - 3-, 4- and 8-strand ropes-ISO 1141:2004; Supersedes EN 697:1995 |
|
CEN EN ISO 11541 |
Natural gas Determination of water content at high pressure-ISO 11541:1997 |
|
CEN EN ISO 11543 |
Modified Starch - Determination of Hydroxypropyl Content - Method Using Proton Nuclear Magnetic Resonance (NMR) Spectrometry-ISO 11543: 2000 |
|
CEN EN ISO 1158 |
Plastics - Vinyl Chloride Homopolymers and Copolymers - Determination of Chlorine Content-ISO 1158:1998 |
|
CEN EN ISO 11643 |
Leather - Tests for Colour Fastness - Colour Fastness of Small Samples to Dry-Cleaning Solutions-ISO 11643:1993 |
|
CEN EN ISO 11644 |
Leather Test for adhesion of finish-ISO 11644:1993 |
|
CEN EN ISO 11816-1 |
Milk and milk products - Determination of alkaline phosphatase activity - Part 1: Fluorimetric method for milk and milk-based drinks-ISO 11816-1:2006 |
|
CEN EN ISO 11857 |
Textile Floor Coverings - Determination of Resistance to Delamination-ISO 11857: 1999 |
|
CEN EN ISO 119 |
Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Phenols - Iodometric Method-ISO 119:1977 |
|
CEN EN ISO 12086-2 |
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties-ISO 12086-2:2006 |
|
CEN EN ISO 12543-4 |
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 4: Test Methods for Durability-ISO 12543-4:1998 |
|
CEN EN ISO 12625-9 |
Tissue paper and tissue products - Part 9: Determination of ball burst strength-ISO 12625-9:2005 |
|
CEN EN ISO 13428 |
Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage-ISO 13428:2005 |
|
CEN EN ISO 1346 |
Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) - 3-, 4- and 8-strand ropes-ISO 1346:2004; Supersedes EN 699:1995 |
|
CEN EN ISO 13468-1 |
Plastics - Determination of Total Luminous Transmittance of Transparent Materials - Part 1: Single-Beam Instrument-ISO 13468-1: 1996 |
|
CEN EN ISO 13501 |
Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation |
|
CEN EN ISO 13503-3 |
Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines-Incorporating corrigendum July 2007 |
|
CEN EN ISO 13625 |
Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings-ISO 13625:2002 |
|
CEN EN ISO 13686 |
Natural gas Quality designation-ISO 13686:1998 |
|
CEN EN ISO 13704 |
No Title |
|
CEN EN ISO 13936-1 |
Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method-ISO 13936-1:2004 |
|
CEN EN ISO 13937-3 |
Textiles - Tear Properties of Fabrics - Part 3: Determination of Tear Force of Wing-Shaped Test Specimens (Single Tear Method)-ISO 13937-3:2000 |
|
CEN EN ISO 14453 |
Pulps - Determination of Acetone-Soluble Matter-ISO 14453: 1997 |
|
CEN EN ISO 14501 |
Milk and Milk Powder - Determination of Aflatoxin M1 Content - Clean-up by Immunoaffinity Chromatography and Determination by High-Performance Liquid Chromatography-ISO 14501:1998 |
|
CEN EN ISO 14526-1 |
Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 1: Designation System and Basis for Specifications-ISO 14526-1: 1999 |
|
CEN EN ISO 14528-2 |
Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 2: Preparation of Test Specimens and Determation of Properties-ISO 14528-2:1999 |
|
CEN EN ISO 14529-1 |
Plastics - Melamine/Phenolic Powder Moulding Compounds (MP-PMCs) - Part 1: Designation System and Basis for Specifications-ISO 14529-1:1999 |
|
CEN EN ISO 14637 |
Milk - Determination of urea content - Enzymatic method using difference in pH (Reference method) |
|
CEN EN ISO 14663-2 |
Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties-ISO 14663-2: 1999 |
|
CEN EN ISO 14910-1 |
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specifications-ISO 14910-1:1997 |
|
CEN EN ISO 14935 |
Petroleum and Related Products - Determination of Wick Flame Persistence of Fire-Resistant Fluids-Corrected 1998-11-12; ISO 14935:1998 |
|
CEN EN ISO 15023-2 |
Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 2: Determination of properties-ISO 15023-2:2003 |
|
CEN EN ISO 15106-3 |
Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method-ISO 15106-3:2003 |
|
CEN EN ISO 15141-1 |
Foodstuffs - Determination of Ochratoxin A in Cereals and Cereal Products - Part 1: High Performance Liquid Chromatographic Method with Silica Gel Clean up-ISO 15141-1:1998 |
|
CEN EN ISO 15252-1 |
Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 1: Designation System and Basis for Specifications-ISO 15252-1: 1999 |
|
CEN EN ISO 15318 |
Pulp, Paper and Board - Determination of 7 Specified Polychlorinated Biphenyls (PCB) |
|
CEN EN ISO 15630-1 |
Steel for the Reinforcement and Prestressing of Concrete - Test Methods - Part 1: Reinforcing Bars, Wire Rod and Wire-ISO 15630-1: 2002; Supersedes ENV 10080: 1995 |
|
CEN EN ISO 15700 |
Leather - Tests for Colour Fastness - Colour Fastness to Water Spotting-ISO 15700:1998 |
|
CEN EN ISO 15701 |
Leather - Tests for Colour Fastness - Colour Fastness to Migration Into Plasticized Poly(Vinyl Chloride)-ISO 15701:1998 |
|
CEN EN ISO 15703 |
Leather - Tests for Colour Fastness - Colour Fastness to Mild Washing-ISO 15703:1998 |
|
CEN EN ISO 15755 |
Paper and Board - Estimation of Contraries-ISO 15755:1999 |
|
CEN EN ISO 15761 |
Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries-ISO 15761: 2002 |
|
CEN EN ISO 1598 |
Plastics - Cellulose Acetate - Determination of Insoluble Particles-ISO 1598: 1990 |
|
CEN EN ISO 1628-3 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes-ISO 1628-3:2001 |
|
CEN EN ISO 17070 |
Leather - Chemical tests - Determination of pentachlorophenol content |
|
CEN EN ISO 17075 |
Leather - Chemical tests - Determination of chromium(VI) content |
|
CEN EN ISO 17227 |
Leather - Physical and mechanical tests - Determination of dry heat resistance of leather-ISO 17227:2002 |
|
CEN EN ISO 17233 |
Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings-ISO 17233:2002 |