|
CEN EN ISO 17235 |
Leather - Physical and mechanical tests - Determination of softness-ISO 17235:2002 |
|
CEN EN ISO 1737 |
Evaporated Milk and Sweetened Condensed Milk - Determination of Fat Content - Gravimetric Method (Reference Method)-ISO 1737: 1999 |
|
CEN EN ISO 17695 |
Footwear - Test methods for uppers - Deformability-ISO 17695:2004;:2001 |
|
CEN EN ISO 17708 |
Footwear Test methods for whole shoe Upper sole adhesion-ISO 17708:2003 |
|
CEN EN ISO 18395 |
Animal and vegetable fats and oils - Determination of monoacylglycerols, diacylglycerols, triacylglycerols and glycerol by high-performance size-exclusion chromatography (HPSEC) |
|
CEN EN ISO 186 |
Paper and Board - Sampling to Determine Average Quality-ISO 186:2002 |
|
CEN EN ISO 18757 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method-ISO 18757:2003; Supersedes EN 725-6:1996 |
|
CEN EN ISO 1969 |
Fibre ropes - Polyethylene - 3- and 4-strand ropes-ISO 1969:2004; Supersedes EN 700:1995 |
|
CEN EN ISO 19952 |
Footwear - Vocabulary-ISO 19952:2005 |
|
CEN EN ISO 20200 |
Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratoryscale test-ISO 20200:2005 |
|
CEN EN ISO 20483 |
Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method-ISO 20483:2006 |
|
CEN EN ISO 2060 |
Textiles - Yarn from Packages - Determination of Linear Density (Mass per Unit Length) by the Skein Method (ISO 2060 : 1994) |
|
CEN EN ISO 20823 |
Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test-ISO 20823:2003 |
|
CEN EN ISO 21078-2 |
Determination of boron(III) oxide in refractory products - Part 2: Acid extraction method for the determination of boron(III) oxide in binder components |
|
CEN EN ISO 2114 |
Plastics (Polyester Resins) and Paints and Varnishes (Binders) - Determination of Partial Acid Value and Total Acid Value-ISO 2114: 2000 |
|
CEN EN ISO 21571 |
Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Nucleic acid extraction-ISO 21571:2005 |
|
CEN EN ISO 21587-2 |
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis |
|
CEN EN ISO 21587-3 |
Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods |
|
CEN EN ISO 2231 |
Rubber- or Plastics- Coated Fabrics - Standard Atmospheres for Conditioning and Testing (ISO 2231 : 1989) |
|
CEN EN ISO 2286-1 |
Rubber- or Plastics-Coated Fabrics - Determination of Roll Characteristics - Part 1: Methods for Determination of Length, Width and Net Mass-ISO 2286-1:1998 |
|
CEN EN ISO 23910 |
Leather - Physical and mechanical tests - Measurement of stitch tear resistance |
|
CEN EN ISO 2440 |
Flexible and Rigid Cellular Polymeric Materials - Accelerated Ageing Tests-ISO 2440: 1997 |
|
CEN EN ISO 2554 |
Plastics - Unsaturated Polyester Resins - Determination of Hydroxyl Value-ISO 2554:1997 |
|
CEN EN ISO 2738 |
Sintered Metal Materials, Excluding Hardmetals - Permeable Sintered Metal Materials - Determination of Density, Oil Content and Open Porosity-ISO 2738: 1999 |
|
CEN EN ISO 3175-3 |
Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvent-ISO 3175-3:2003 |
|
CEN EN ISO 3325 |
Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength-Includes amendment A1: 2002; ISO 3325: 1996 + A1: 2001 |
|
CEN EN ISO 3377-2 |
Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear-ISO 3377-2:2002 |
|
CEN EN ISO 3386-2 |
Flexible Cellular Polymeric Materials - Determination of Stress-Strain Characteristics in Compression - Part 2: High-Density Materials-ISO 3386-2:1997 |
|
CEN EN ISO 3582 |
Flexible Cellular Polymeric Materials - Laboratory Assessment of Horizontal Burning Characteristics of Small Specimens Subjected to a Small Flame-Incorporates Amendment A1: September 2007 |
|
CEN EN ISO 3596 |
Animal and Vegetable Fats and Oils - Determination of Unsaponifiable Matter - Method Using Diethyl Ether Extraction-ISO 3596: 2000 |
|
CEN EN ISO 3672-1 |
Plastics - Unsaturated-Polyester Resins (UP-R) - Part 1: Designation System-ISO 3672-1:2000 |
|
CEN EN ISO 3727-3 |
Butter - Determination of moisture, non-fat solids and fat contents - Part 3: Calculation of fat content-ISO 3727-3: 2003 |
|
CEN EN ISO 3758 |
Textiles - Care labelling code using symbols-Supersedes EN 23758:1993; ISO 3758:2005 |
|
CEN EN ISO 3954 |
Powders for powder metallurgical purposes - Sampling |
|
CEN EN ISO 4142 |
Laboratory glassware - Test tubes-ISO 4142: 2002 |
|
CEN EN ISO 4263-1 |
Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 1: Procedure for mineral oils-ISO 4263-1:2003 |
|
CEN EN ISO 4610 |
Plastics - Vinyl Chloride Homopolymer and Copolymer Resins - Sieve Analysis Using Air-Jet Sieve Apparatus-ISO 4610: 2001; Supersedes EN ISO 4610: 1997 |
|
CEN EN ISO 4612 |
Plastics - Preparation of PVC Pastes for Test Purposes - Planetary-Mixer Method-ISO 4612:1999 |
|
CEN EN ISO 4615 |
Plastics - Unsaturated Polyesters and Epoxide Resins - Determination of Total Chlorine Content-ISO 4615:1979 |
|
CEN EN ISO 4638 |
Polymeric Materials, Cellular Flexible - Determination of Air Flow Permeability |
|
CEN EN ISO 4671 |
Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
|
CEN EN ISO 4796-1 |
Laboratory Glassware - Bottles - Part 1: Screw-Neck Bottles-ISO 4796-1: 2000 |
|
CEN EN ISO 4921 |
Knitting - Basic Concepts - Vocabulary-ISO 4921:2000 |
|
CEN EN ISO 5377 |
Starch Hydrolysis Products - Determination of Reducing Power and Dextrose Equivalent - Lane and Eynon Constant Titre Method (ISO 5377:1981) |
|
CEN EN ISO 5403 |
Leather Physical and mechanical tests Determination of water resistance of flexible leather-ISO 5403:2002 |
|
CEN EN ISO 5943 |
Cheese and processed cheese products - Determination of chloride content - Potentiometric titration method-ISO 5943:2006 |
|
CEN EN ISO 604 |
Plastics - Determination of Compressive Properties-ISO 604: 2002 |
|
CEN EN ISO 6141 |
Gas analysis - Requirements for certificates for calibration gases and gas mixtures |
|
CEN EN ISO 6179 |
Rubber, Vulcanized or Thermoplastic - Rubber Sheets and Rubber-Coated Fabrics - Determination of Transmission Rate of Volatile Liquids (Gravimetric Technique)-ISO 6179:1998 |
|
CEN EN ISO 6402-1 |
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications-ISO 6402-1:2002 |
|
CEN EN ISO 6402-2 |
Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties-ISO 6402-2:2003 |
|
CEN EN ISO 6570 |
Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods-ISO 6570:2001 |
|
CEN EN ISO 6808 |
Plastics Hoses and Hose Assemblies for Suction and Low-Pressure Discharge of Petroleum Liquids - Specification-ISO 6808:1999 |
|
CEN EN ISO 6941 |
Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens-ISO 6941:2003 |
|
CEN EN ISO 707 |
Milk and Milk Products - Guidance on Sampling-ISO 707: 1997 |
|
CEN EN ISO 7231 |
Polymeric Materials, Cellular Flexible - Method of Assessment of Air Flow Value at Constant Pressure-Drop-ISO 7231: 1984 |
|
CEN EN ISO 7328 |
Milk-Based Edible Ices and Ice Mixes - Determination of Fat Content - Gravimetric (Reference Method)-ISO 7328:1999 |
|
CEN EN ISO 734-2 |
Oilseed Residues - Determination of Oil Content - Part 2: Rapid Extraction Method-ISO 734-2: 1998 |
|
CEN EN ISO 7441 |
Corrosion of Metals and Alloys - Determination of Bimetallic Corrosion in Outdoor Exposure Corrosion Tests (ISO 7441 : 1984) |
|
CEN EN ISO 7500-2 |
Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 2: Tension Creep Testing Machines - Verification of the Applied Load |
|
CEN EN ISO 7539-5 |
Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 5: Preparation and Use of C-Ring Specimens First Edition (ISO 7539-5: 1989) |
|
CEN EN ISO 7823-1 |
Plastics - Poly (methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast Sheets-ISO 7823-1:2003 |
|
CEN EN ISO 8381 |
Milk-Based Infant Foods - Determination of Fat Content - Gravimetric Method (Reference Method)-ISO 8381:2000 |
|
CEN EN ISO 8388 |
Knitted fabrics Types Vocabulary |
|
CEN EN ISO 8491 |
Metallic materials - Tube (in full section) - Bend test-ISO 8491:1998; Supersedes EN 10232:1993 |
|
CEN EN ISO 8565 |
Metals and Alloys - Atmospheric Corrosion Testing - General Requirements for Field Tests (ISO 8565 : 1992) |
|
CEN EN ISO 862 |
Surface active agents Vocabulary Trilingual version-ISO 862:1984/Cor 1:1993 |
|
CEN EN ISO 8968-2 |
Milk - Determination of Nitrogen Content - Part 2: Block-Digestion Method (Macro Method)-ISO 8968-2: 2001 |
|
CEN EN ISO 8968-3 |
Milk - Determination of nitrogen content - Part 3: Block-digestion method (Semi-micro rapid routine method) |
|
CEN EN ISO 8968-5 |
Milk - Determination of Nitrogen Content - Part 5: Determination of Protein-Nitrogen Content-ISO 8968-5: 2001 |
|
CEN EN ISO 8986-1 |
Plastics - Polybutene (PB) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-ISO 8986-1:1993 |
|
CEN EN ISO 9073-2 |
Textiles - Test Methods for Nonwovens - Part 2: Determination of Thickness-Supersedes EN 29073-2 : 1992; ISO 9073-2 : 1995 |
|
CEN EN ISO 9237 |
Textiles - Determination of Permeability of Fabrics to Air (ISO 9237 : 1995) |
|
CEN EN ISO 9400 |
Nickel-Based Alloys - Determination of Resistance to Intergranular Corrosion (ISO 9400 : 1990) |
|
CEN EN ISO 9556 |
Steel and Iron - Determination of Total Carbon Content - Infrared Absorption Method After Combustion in an Induction Furnace-ISO 9556:1989 |
|
CEN EN ISO 9665 |
Adhesives - Animal Glues - Methods of Sampling and Testing-ISO 9665: 1998: (W) |
|
CEN EN ISO 9832 |
Animal and Vegetable Fats and Oils - Determination of Residual Technical Hexane Content-ISO 9832:2002 |
|
CEN EN ISO 9902-4 |
Textile Machinery - Noise Test Code - Part 4: Yarn Processing, Cordage and Rope Manufacturing Machinery-ISO 9902-4:2001 |
|
CEN EN ISO 9902-7 |
Textile Machinery - Noise Test Code - Part 7: Dyeing and Finishing Machinery-ISO 9902-7:2001 |
|
CEN ENV 1094-7 |
Insulating Refractory Products Part 7: Methods of Test for Ceramic Fibre Products |
|
CEN ENV 12 141 |
Fruit and Vegetable Juices - Determination of the Stable Oxygen Isotope Ratio (18O/16O) of Water from Fruit Juices - Method Using Isotope Ratio Mass Spectrometry |
|
CEN ENV 12 448 |
Paper - Printing and Business Paper - Determination of the Coefficient of Static Friction |
|
CEN ENV 12788 |
Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at High Temperature under Inert Atmosphere - Determination of Flexural Strength |
|
CEN ENV 13235 |
Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at High Temperature Under Inert Atmosphere - Determination of Creep Behaviour |
|
CEN ENV 13696 |
Wood and Parquet Flooring - Determination Of Elasticity and Resistance to Wear |
|
CEN ENV 302-5 |
Adhesives for Load-Bearing Timber Structures - Test Methods - Part 5: Determination of the Conventional Assembly Time |
|
CEN ENV 807 |
Wood Preservatives - Determination of the Effectiveness Against Soft Rotting Micro-Fungi and Other Soil Inhabiting Micro-Organisms |
|
CENELEC HD 1039 |
Steel Tubes for Falsework and Working Scaffolds - Requirements, Tests-Superseded by EN 39:2001 |
|
CENELEC HD 582 S1 |
Specification for Unused Polybutylenes |
|
CEN ISO/DIS 3656 |
Animal and Vegetable Fats and Oils - Determination of Ultraviolet Absorbance Expressed as Specific UV Extinction |
|
CEN CEN ISO/TS 17234 |
Leather - Chemical tests - Determination of certain azo colourants in dyed leathers-ISO/TS 17234:2003 |
|
CEN CEN/TR 15118 |
Testing guidelines for touch and close fasteners |
|
CEN CEN/TR 15139 |
Petroleum products and other liquids Applicability of test methods on sulfur determination in petrol and diesel fuel |
|
CEN CEN/TR 15298 |
Foodstuffs - Sample comminution for mycotoxins analysis - Comparison between dry milling and slurry mixing |
|
CEN CEN/TR 15370-1 |
Solid biofuels - Method for the determination of ash melting behaviour - Part 1: Characteristic temperatures method |
|
CEN CEN/TS 1099 |
Plywood - Biological durability - Guidance for the assessment of plywood for use in different use classes |
|
CEN CEN/TS 13130-10 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 10: Determination of acrylamide in food simulants |
|
CEN CEN/TS 13130-16 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 16: Determination of caprolactam and caprolactam salt in food simulants |
|
CEN CEN/TS 13130-17 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 17: Determination of carbonyl chloride in plastics |
|
CEN CEN/TS 13130-26 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 26: Determination of 1- octene and tetrahydrofuran in food simulants |
|
CEN CEN/TS 14159 |
Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat |
|
CEN CEN/TS 14918 |
Solid Biofuels - Method for the determination of calorific value |
|
CEN CEN/TS 14938-2 |
Copper and copper alloys - Determination of bismuth content - Part 2: FAAS method |
|
CEN CEN/TS 14966 |
Wood-based panels - Small scale indicative test methods for certain mechanical properties |
|
CEN CEN/TS 15022-4 |
Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometry method (FAAS) |
|
CEN CEN/TS 15023-3 |
Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometry method (FAAS) |
|
CEN CEN/TS 15082 |
Wood preservatives - Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber - Field test |
|
CEN CEN/TS 15083-1 |
Durability of wood and wood-based products Determination of the natural durability of solid wood against wood-destroying fungi, test methods Part 1: Basidiomycetes |
|
CEN CEN/TS 15149-1 |
Solid biofuels Methods for the determination of particle size distribution Part 1: Oscillating screen method using sieve apertures of 3,15 mm and above |
|
CEN CEN/TS 15149-3 |
Solid biofuels Methods for the determination of particle size distribution Part 3: Rotary screen method |
|
CEN CEN/TS 15210-1 |
Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 1: Pellets |
|
CEN CEN/TS 15357 |
Solid recovered fuels - Terminology, definitions and descriptions |
|
CEN CEN/TS 15397 |
Wood preservatives - Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test |
|
CEN CEN/TS 15402 |
Solid recovered fuels Methods for the determination of the content of volatile matter |
|
CEN CEN/TS 15405 |
Solid recovered fuels - Methods for the determination of density of pellets and briquettes |
|
CEN CEN/TS 15406 |
Solid recovered fuels - Methods for the determination of bridging properties of bulk material |
|
CEN CEN/TS 15412 |
Solid recovered fuels - Methods for the determination of metallic aluminium |
|
CEN CEN/TS 15568 |
Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Sampling strategies |
|
CEN CEN/TS 15590 |
Solid recovered fuels - Determination of the biomass content based on the 14C method |
|
CEN CEN/TS 15679 |
Thermal Modified Timber - Definitions and characteristics |
|
CEN EN 10016-2 |
Non-Alloy Steel Rod for Drawing and/or Cold Rolling - Part 2: Specific Requirements for General Purpose Rod |
|
CEN EN 10067 |
Hot Rolled Bulb Flats - Dimensions and Tolerances on Shape, Dimensions and Mass |
|
CEN EN 1007-1 |
Advaced technical ceramics - Ceramic composites - -Methods of test for reinforcement - Part 1: Determination of size content-Supersedes ENV 1007-1: 1993 |
|
CEN EN 1007-2 |
Advanced technical ceramics - Ceramics composites - Methods of test for reinforcement - Part 2: Determination of linear density-Supersedes ENV 1007-2: 1993 |
|
CEN EN 10080 |
Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
|
CEN EN 10090 |
Valve Steels and Alloys for Internal Combustion Engines |
|
CEN EN 1014-3 |
Wood Preservatives - Creosote and Creosoted Timber - Methods of Sampling and Analysis - Part 3: Determination of the Benzo[a]pyrene Content of Creosote |
|
CEN EN 1014-4 |
Wood Preservatives - Creosote and Creosoted Timber - Methods of Sampling and Analysis - Part 4: Determination of the Water-Extractable Phenols Content of Creosote |
|
CEN EN 10169-3 |
Continuously organic coated (coil coated) steel flat products Part 3: Products for building interior applications |
|
CEN EN 10181 |
Chemical Analysis of Ferrous Materials Determination of Lead in Steels Flame Atomic Absorption Spectrometric Method |
|
CEN EN 10184 |
Chemical Analysis of Ferrous Materials Determination of Phosphorous in non-alloyed steels and irons - molybdenum blue spectrophotometric method |
|
CEN EN 10221 |
Surface Quality Classes for Hot-Rolled Bars and Rods - Technical Delivery Conditions |
|
CEN EN 10223-4 |
Steel Wire and Wire Products for Fences - Part 4: Steel Wire Welded Mesh Fencing |
|
CEN EN 10223-7 |
Steel wire and wire products for fences Part 7: Steel wire welded panels For fencing |
|
CEN EN 10244-2 |
Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 2: Zinc or Zinc Alloy Coatings-Incorporating Corrigendum April 2001 |
|
CEN EN 10244-5 |
Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 5: Nickel Coatings |
|
CEN EN 10246-10 |
Non-Destructive Testing of Steel Tubes - Part 10: Radiographic Testing of the Weld Seam Automatic Fusion Arc Welded Steel Tubes for the Detection of Imperfections |
|
CEN EN 10246-11 |
Non-Destructive Testing of Steel Tubes - Part 11: Liquid Penetrant Testing of Seamless and Welded Steel Tubes for the Detection of Surface Imperfections |
|
CEN EN 10246-13 |
Non-Destructive Testing of Steel Tubes - Part 13: Automatic Full Peripheral Ultrasonic Thickness Testing for Seamless and Welded (Except Submerged Arc Welded) Steel Tubes |
|
CEN EN 10246-14 |
Non-Destructive Testing of Steel Tubes - Part 14: Automatic Ultrasonic Testing of Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for the Detection of Laminar Imperfections |
|
CEN EN 10246-16 |
Non-Destructive Testing of Steel Tubes - Part 16: Automatic Ultrasonic Testing of Area Adjacent to the Weld Seam of Welded Steel Tubes for the Detection of Laminar Imperfections |
|
CEN EN 10246-17 |
Non-Destructive Testing of Steel Tubes - Part 17: Ultrasonic Testing of Tube Ends of Seamless and Welded Steel Tubes for the Detection of Laminar Imperfections |
|
CEN EN 10246-4 |
Non-Destructive Testing of Steel Tubes - Part 4: Automatic Full Peripheral Magnetic Transducer/Flux Leakage Testing of Seamless Ferromagnetic Steel Tubes for the Detection of Transverse Imperfections |
|
CEN EN 10246-8 |
Non-Destructive Testing of Steel Tubes - Part 8: Automatic Ultrasonic Testing of the Weld Seam of Electric Welded Steel Tubes for the Detection of Longitudinal Imperfections |
|
CEN EN 10246-9 |
Non-Destructive Testing of Steel Tubes - Part 9: Automatic Ultrasonic Testing of the Weld Seam of Submerged Arc Welded Steel Tubes for the Detection of Longitudinal and/or Transverse Imperfections |
|
CEN EN 10248-2 |
Hot Rolled Sheet Piling of Non Alloy Steels - Part 2: Tolerances on Shape and Dimensions |
|
CEN EN 10275 |
Metallic Materials - Tube Ring Hydraulic Pressure Test |
|
CEN EN 10323 |
Steel wire and wire products - Bead wire |
|
CEN EN 10334 |
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate) |
|
CEN EN 104 |
Ceramic Tiles - Determination of Resistance to Thermal Shock |
|
CEN EN 1058 |
Wood-Based Panels - Determination of Characteristic Values of Mechanical Properties and Density |
|
CEN EN 1075 |
Timber Structures - Test Methods - Joints Made with Punched Metal Plate Fasteners |
|
CEN EN 1087-1 |
Particleboards - Determination of Moisture Resistance Part 1. Boil Test |
|
CEN EN 1096-3 |
Glass in Building - Coated Glasss - Part 3: Requirements and Test Methods for Class C and D Coatings |
|
CEN EN 1103 |
Textiles - Fabrics for apparel - Detailed procedure to determine the burning behaviour |
|
CEN EN 1114-3 |
Rubber and Plastics Machines - Extruders and Extrusion Lines - Part 3: Safety Requirements for Haul-Offs |
|
CEN EN 1131 |
Fruit and Vegetable Juices - Determination of the Relative Density |
|
CEN EN 1159-3 |
Advanced technical ceramics Ceramic composites, thermophysical properties Part 3: Determination of specific heat capacity-supersedes ENV 1159-3:1995 |
|
CEN EN 1163 |
Feather and Down - Test Methods - Determination of the Oil and Fat Content |
|
CEN EN 1164 |
Feather and Down - Test Methods - Determination of the Turbidity of an Aqueous Extract |
|
CEN EN 11704-2 |
Determination of the elasticity of fabrics - Part 2: Multiaxial tests |
|
CEN EN 1172 |
Copper and Copper Alloys - Sheet snd Strip for Building Purposes |
|
CEN EN 1186-1 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 1: Guide to the Selection of Conditions and Test Methods for Overall Migration-Supersedes ENV 1186-1: 1994 |
|
CEN EN 1186-10 |
Materials and articles in contact with foodstuffs - Plastics - Part 10: Test methods for overall migration into olive oil (modified method for use in cases where incomplete extraction of olive oil occurs) |
|
CEN EN 1186-3 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 3: Test Methods for Overall Migration into Aqueous Food Simulants by Total Immersion-Supersedes ENV 1186-3: 1994 |
|
CEN EN 1186-6 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 6: Test Methods for Overall Migration into Olive Oil Using a Pouch-Supersedes ENV 1186-6: 1994 |
|
CEN EN 12004 |
Adhesives for tiles - Requirements, evaluation of conformity, classification and designation |
|
CEN EN 12014-3 |
Foodstuffs - Determination of nitrate and/or nitrite content - Part 3: Spectrometric determination of nitrate and nitrite content of meat products after enzymatic reduction of nitrate to nitrite-Supersedes ENV 12014-3:1998 |
|
CEN EN 12025 |
Self Adhesive Tapes - Measurement of Tear Resistance by the Pendulum |
|
CEN EN 12028 |
Self Adhesive Tapes - Measurement of Elongation under Static Load |
|
CEN EN 12029 |
Self Adhesive Tapes - Determination of the Water-Soluble Corrosive Ions |
|
CEN EN 12030 |
Self Adhesive Tapes - Measurement of Impact Resistance |
|
CEN EN 12066 |
Installations and Equipment for Liquefied Natural Gas - Testing of Insulating Linings for Liquefied Natural Gas Impounding Areas |
|
CEN EN 1207 |
Chemicals used for treatment of water intended for human consumption - Tetrapotassium pyrophosphate |
|
CEN EN 12092 |
Adhesives - Determination of Viscosity |
|
CEN EN 1211 |
Chemicals used for treatment of water intended for human consumption - Potassium tripolyphosphate |
|
CEN EN 12118 |
Plastics Piping Systems - Determination of Moisture Content in Thermoplastics by Coulometry |
|
CEN EN 12120 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Hydrogen Sulfite |
|
CEN EN 12121 |
Chemicals used for treatment of water intended for human consumption - Sodium disulfite |
|
CEN EN 12122 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Ammonia Solution |
|
CEN EN 12123 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Ammonium Sulfate |
|
CEN EN 12125 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Thiosulfate |
|
CEN EN 12138 |
Fruit and Vegetable Juices - Enzymatic Determination of D-Malic Acid Content - NAD Spectrometric Method |
|
CEN EN 12173 |
Chemicals used for treatment of water intended for human consumption - Sodium fluoride |
|
CEN EN 12186 |
Gas Supply Systems - Gas Pressure Regulating Stations for Transmission and Distribution - Functional Requirements-Amendment A1: 08/2005 |
|
CEN EN 12225 |
Geotextiles and Geotextile-Related Products - Method for Determining the Microbiological Resistance by a Soil Burial Test |
|
CEN EN 12269-1 |
Determination of the Bond Behaviour between Reinforcing Steel and Autoclaved aerated Concrete by the |
|
CEN EN 12373-10 |
Aluminium and Aluminium Alloys - Anodizing - Part 10: Measurement of Mean Specific Abrasion Resistance of Anodic Oxidation Coatings Using an Abrasive Jet Test Apparatus-Ratified European Text |
|
CEN EN 12373-13 |
Aluminium and Aluminium Alloys - Anodizing - Part 13: Measurement of Reflectance Characteristics of Aluminium Surfaces Using a Goniophotometer or an Abridged Goniophotometer |
|
CEN EN 12373-15 |
Aluminium and Aluminium Alloys - Anodizing - Part 15: Assessment of Resistance of Anodic Oxidation Coatings to Cracking by Deformation |
|
CEN EN 12373-17 |
Aluminium and Aluminium Alloys - Anodizing - Part 17: Determination of Electric Breakdown Potential |
|
CEN EN 12373-5 |
Aluminium and Aluminium Alloys - Anodizing - Part 5: Assessment of Quality of Sealed Anodic Oxidation Coatings by Measurement of Admittance-Ratified European Text |
|
CEN EN 12373-6 |
Aluminium and Aluminium Alloys - Anodizing - Part 6: Assessment of Quality of Sealed Anodic Oxidation Coatings by Measurement of the Loss of Mass After Immersion in Phosphoric Acid/Chromic Acid Solution without Prior Acid Treatment-Ratified European Text |
|
CEN EN 12385-7 |
Steel wire ropes Safety Part 7: Locked coil ropes for mine shafts |
|
CEN EN 12393-1 |
Non-Fatty Foods - Multiresidue Methods for the Gas Chromatographic Determination of Pesticide Residues - Part 1: General Considerations-Ratified European Text |
|
CEN EN 12402 |
Lead and Lead Alloys - Methods of Sampling for Analysis |
|
CEN EN 12409 |
Rubber and Plastics Machines - Thermoforming Machines - Safety Requirements |
|
CEN EN 12422 |
Sisal Twines |
|
CEN EN 12436 |
Adhesives for Load-Bearing Timber Structures - Casein Adhesives - Classification and Performance Requirements |
|
CEN EN 1244 |
Adhesives - Determination of the Colour and/or Colour Changes of Adhesives Coats under the Influence of Light |
|
CEN EN 12441-1 |
Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys - Titrimetric method-Includes amendment A1:2004 |
|
CEN EN 12441-3 |
Zinc and Zinc Alloys - Chemical Analysis - Part 3: Determination of Lead, Cadmium and Copper - Flame Atomic Absorption Spectrometric Method |
|
CEN EN 12441-4 |
Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys - Spectrophotometric method |
|
CEN EN 12441-5 |
Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc - Spectrophotometric method |
|
CEN EN 12458 |
Surface Active Agents - Determination of Stability in Hard Water |
|
CEN EN 12479 |
Wood Poles for Overhead Lines - Sizes - Methods of Measurement and Permissible Deviations |
|
CEN EN 12482-1 |
Aluminium and Aluminium Alloys - Reroll Stock for General Applications - Part 1: Specifications for Hot Rolled Reroll Stock |
|
CEN EN 12485 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Calcium Carbonate, High-Calcium Lime and Half-Burnt Dolomite - Test Methods |
|
CEN EN 12502-5 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyed steels |
|
CEN EN 12509 |
Timber Poles for Overhead Lines - Test Methods - Determination of Modulus of Elasticity, Bending Strength, Density and Moisture Content |
|
CEN EN 12546-2 |
Materials and Articles in Contact with Foodstuffs - Insulated Containers for Domestic Use - Part 2: Specification for Insulated Bags and Boxes |
|
CEN EN 12571 |
Materials and Articles in Contact with Foodstuffs - Transport Units for Catering Containers Containing Prepared Foodstuffs - Thermal and Hygienic Requirements and Testing |
|
CEN EN 12576 |
Plastics - Fibre Reinforced Composites - Preparation of Compression Moulded Test Plates of SMC, BMC and DMC |
|
CEN EN 12625-5 |
Tissue Paper and Tissue Products - Part 5: Determination of Wet Tensile Strength |
|
CEN EN 12671 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Chlorine Dioxide |
|
CEN EN 12698-1 |
Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods |
|
CEN EN 12703 |
Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Determination of Low Temperature Flexibility or Cold Crack Temp |
|
CEN EN 12747 |
Footwear - Test Methods for Insoles - Abrasion Resistance |
|
CEN EN 12758 |
Glass in Building - Glazing and Airborne Sound Insulation - Product Descriptions and Determination of Properties |
|
CEN EN 12759 |
Rubber- or Plastic-Coated Fabrics - Determination of Resistance to Liquids |
|
CEN EN 12789 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength-Supersedes ENV 12789:1998 |
|
CEN EN 1279-2 |
Glass in building Insulating glass units Part 2: Long term test method and requirements for moisture penetration |
|
CEN EN 12822 |
Foodstuffs - Determination of Vitamin E by High Performance Liquid Chromatography - Measurement of a-, B-, y- and o-Tocopherols |
|
CEN EN 12836 |
Surface Active Agents - Determination of the Water Number of Alkoxylated Products-Supersedes ENV 12836: 1999 |
|
CEN EN 12842 |
Ductile Iron Fittings for PVC-U or PE Piping Systems - Requirements and Test Methods |
|
CEN EN 12860 |
Gypsum Based Adhesives for Gypsum Blocks - Definitions, Requirements and Test Methods-Incorporating Corrigendum February 2002 |
|
CEN EN 12871 |
Wood-Based Panels - Performance Specifications and Requirements for Load Bearing Boards for Use in Floors, Walls and Roofs |
|
CEN EN 12873-2 |
Influence of materials on water intended for human consumption Influence due to migration Part 2: Test method for non-metallic and non-cementitious site-applied materials |
|
CEN EN 12873-4 |
Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes |
|
CEN EN 1288-2 |
Glass in Building - Determination of the Bending Strength of Glass - Part 2: Coaxial Double Ring Test on Flat Specimens with Large Test Surface Areas |
|
CEN EN 12883 |
Founding - Equipment for the Production of Lost Patterns for the Lost Wax Casting Process |
|
CEN EN 1288-3 |
Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending) |
|
CEN EN 12890 |
Founding - Patterns, Pattern Equipment and Coreboxes for the Production of Sand Moulds and Sand Cores |
|
CEN EN 12910 |
Products used for treatment of water intended for human consumption - Garnet |
|
CEN EN 12913 |
Products Used for Treatment of Water Intended for Human Consumption - Powdered Diatomaceous Earth |
|
CEN EN 12915-1 |
Products used for the treatment of water intended for human consumption Granular activated carbon Part 1: Virgin granular activated carbon-(N) |
|
CEN EN 12935 |
Feather and Down - Hygiene and Cleanliness Requirements |
|
CEN EN 12960 |
Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Determination of Shear Resistance-Incorporating corrigendum June 2007 |
|
CEN EN 12962 |
Adhesives - Determination of Elastic Behaviour of Liquid Adhesives ( |
|
CEN EN 12974 |
Surface Active Agents - Determination of the 1,4-Dioxane Content in Alkyl-Ethoxy-Sulfate Products by GLC/Head Space Procedure |
|
CEN EN 1301-1 |
Aluminium and Aluminium Alloys - Drawn Wire - Part 1: Technical Conditions for Inspection and Delivery |
|
CEN EN 13017-1 |
Solid Wood Panels - Classification by Surface Appearance - Part 1: Softwood |
|
CEN EN 13017-2 |
Solid Wood Panels - Classification by Surface Appearance - Part 2: Hardwood |
|
CEN EN 13035-4 |
Machines and plants for the manufacture, treatment and processing of flat glass Safety requirements Part 4: Tilting tables |
|
CEN EN 13042-3 |
Machines and Plants for the Manufacture, Treatment and Processing of Hollow Glass - Safety Requirements - Part 3: IS Machines |
|
CEN EN 1310 |
Round and Sawn Timber - Method of Measurement of Features |
|
CEN EN 1311 |
Round and Sawn Timber - Method of Measurement of Biological Degrade |
|
CEN EN 1312 |
Round and Sawn Timber - Determination of the Batch Volume of Sawn Timber |
|
CEN EN 13130-7 |
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 7: Determination of monoethylene glycol and diethylene glycol in food simulants |
|
CEN EN 13147 |
Copper and Copper Alloys - Determination of Residual Stresses in the Border Area of Slit Strip |
|
CEN EN 13148 |
Copper and Copper Alloys - Hot-Dip Tinned Strip |
|
CEN EN 13150 |
Workbenches for Laboratories - Dimensions, Safety Requirements amd Test Methods |
|
CEN EN 13179-2 |
Tests for Filler Aggregate Used in Bituminous Mixtures - Part 2: Bitumen Number |
|
CEN EN 1318 |
Textile floor coverings - Determination of the apparent effective thickness of the backing |
|
CEN EN 13188 |
Vinegar - Product Made from Liquids of Agricultural Origin - Definitions, Requirements, Marking |
|
CEN EN 13191-2 |
Non-Fatty Food - Determination of Bromide Residues - Part 2: Determination of Inorganic Bromide |
|
CEN EN 13194 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Acetic Acid |
|
CEN EN 13207 |
Silage Thermoplastic Films |
|
CEN EN 1323 |
Adhesives for tiles - Concrete slabs for tests |
|
CEN EN 13235 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour |
|
CEN EN 13245-1 |
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of light coloured profiles |
|
CEN EN 13258 |
Materials and articles in contact with foodstuffs - Test methods for crazing resistance of ceramic articles |
|
CEN EN 13265 |
Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects-Incorporating Corrigendum September 2003; Includes Amendment A1:2005 |
|
CEN EN 13305 |
Bitumen and bituminous binders - Framework of specification of hard industrial bitumens |
|
CEN EN 13347 |
Copper and copper alloys Rod and wire for welding and braze welding |
|
CEN EN 13353 |
Solid wood panels (SWP) Requirements |
|
CEN EN 13392 |
Textiles - Monofilaments - Determination of Linear Density |
|
CEN EN 13417-2 |
Reinforcement - Specifications for Woven Fabrics - Part 2: Methods of Test and General Requirements |
|
CEN EN 13473-2 |
Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements |
|
CEN EN 1348 |
Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives |
|
CEN EN 13483 |
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
|
CEN EN 13488 |
Wood flooring Mosaic parquet elements |
|
CEN EN 13514 |
Footwear - Test Methods for Uppers - Delamination Resistance |
|
CEN EN 13522 |
Footwear - Test Methods for Uppers - Tensile Strength and Elongation |
|
CEN EN 13536 |
Manufactured Articles Filled with Feather and Down - Requirements for Clothing - Light Use |
|
CEN EN 13542 |
Manufactured Articles Filled with Feather and Down - Method for Determining the Compressibility Index of Clothing |
|
CEN EN 13560 |
Surface active agents - Determination of amide nitrogen content - Potentiometric titration-Incorporating corrigendum December 2002 |
|
CEN EN 13569 |
Cabinet Roller Towels - Performrnce Requirements and Processing |
|
CEN EN 13572 |
Footwear - Test Methods for Uppers, Lining and Insocks - Seam Strength |
|
CEN EN 13621 |
Food processing machinery - Salad dryers - Safety and hygiene requirements |
|
CEN EN 13629 |
Wood flooring - Solid pre-assembled hardwood board-Incorporating corrigendum June 2007 |
|
CEN EN 13630-3 |
Explosives for civil uses Detonating cords and safety fuses Part 3: Determination of sensitiveness to friction of the core of detonating cords |
|
CEN EN 13631-2 |
Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives |
|
CEN EN 13673-2 |
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise |
|
CEN EN 13677-2 |
Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements |
|
CEN EN 13717 |
Surface active agents Determination of primary, secondary and tertiary amino nitrogen Potentiometric titration |
|
CEN EN 13753 |
Products used for treatment of water intended for human consumption - Granular activated alumina |
|
CEN EN 1376 |
Foodstuffs - Determination of Saccharin in Table Top Sweetener Preparations - Spectrometric Method |
|
CEN EN 13763-12 |
Explosives for civil uses - Detonators and relays - Part 12:Determination of resistance to hydrostatic pressure |
|
CEN EN 13780 |
Touch and close fasteners - Determination of longitudinal shear strength |
|
CEN EN 13804 |
Foodstuffs - Determination of Trace Elements - Performance Criteria, General Considerations and Sample Preparation |
|
CEN EN 13855-1 |
Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 1: Test method by rotation |
|
CEN EN 13855-2 |
Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 2: Test method by oscillation |
|
CEN EN 1388-1 |
Materials and articles in contact with foodstuffs Silicate surfaces Part 1: Determination of the release of lead and cadmium from ceramic ware |
|
CEN EN 13893 |
Resilient, laminate and textile floor coverings Measurement of dynamic coefficient of friction on dry floor surfaces |
|
CEN EN 13920-11 |
Aluminium and aluminium alloys - Scrap - Part 11: Scrap consisting of aluminium-copper radiators |
|
CEN EN 13920-12 |
Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy |
|
CEN EN 13920-14 |
Aluminium and Aluminium Alloys - Scrap - Part 14: Scrap from Post-Consumer Aluminium Packagings |
|
CEN EN 13920-4 |
Aluminium and aluminium alloys Scrap Part 4: Scrap consisting of one single wrought alloy |
|
CEN EN 13926 |
Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value - N-methyl imidazole method |