|
CEN EN 13955 |
Surface active agents Determination of Krafft point and solubility of ionic surface active agents |
|
CEN EN 13981-4 |
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings |
|
CEN EN 14030 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids-ISO/TR 12960: 1998, Modified; Includes amendment A1:2003; Supersedes ENV ISO 12960: 1998 |
|
CEN EN 14035-20 |
Fireworks - Part 20: Jumping crackers - Specification and test methods |
|
CEN EN 14035-25 |
Fireworks Part 25: Party poppers Specification and test methods |
|
CEN EN 14035-4 |
Fireworks Part 4: Bangers and banger batteries Specification and test methods-Incorporating corrigendum January 2005 |
|
CEN EN 1407 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Anionic and Non-Ionic Polyacrylamides |
|
CEN EN 14081-1 |
Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements-Supersedes EN 518:1995 and EN 519:1995 |
|
CEN EN 1410 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Cationic Polyacrylamides |
|
CEN EN 14107 |
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry |
|
CEN EN 14118-1 |
Reinforcement Specifications for textile glass mats (chopped strand and continuous filament mats) Part 1: Designation |
|
CEN EN 1412 |
Copper and Copper Alloys - European Numbering System |
|
CEN EN 14132 |
Foodstuffs - Determination of ochratoxin A in barley and roasted coffee - HPLC method with immunoaffinity column clean-up |
|
CEN EN 14133 |
Foodstuffs - Determination of ochratoxin A in wine and beer - HPLC method with immunoaffinity column clean-up |
|
CEN EN 14141 |
Valves for natural gas transportation in pipelines - Performance requirements and tests-Ratified European Text |
|
CEN EN 14150 |
Geosynthetic barriers - Determination of permeability to liquids |
|
CEN EN 14175-3 |
Fume cupboards - Part 3: Type test methods |
|
CEN EN 14177 |
Foodstuffs Determination of patulin in clear and cloudy apple juice and puree HPLC method with liquid/liquid partition clean-up |
|
CEN EN 14185-1 |
Non-fatty food - Determination of N-methylcarbamate residues - Part 1: HPLC-method with SPE clean-up |
|
CEN EN 14210 |
Surface active agents Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method |
|
CEN EN 14221 |
Timber and wood-based materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications |
|
CEN EN 14263 |
Derivatives from coal pyrolysis Coal tar and pitch based binders and related products: carbon binder pitch Characteristics and test methods |
|
CEN EN 14278-3 |
Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device |
|
CEN EN 14279 |
Laminated Veneer Lumber (LVL) Definitions, classification and specifications |
|
CEN EN 14321-2 |
Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard |
|
CEN EN 14447 |
Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification |
|
CEN EN 14493 |
Structural adhesives Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions Wedge impact method-ISO 11343:1993 modified |
|
CEN EN 14575 |
Geosynthetic barriers - Screening test method for determining the resistance to oxidation |
|
CEN EN 14598-3 |
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
|
CEN EN 14670 |
Surface active agents - Sodium dodecyl sulfate - Analytical method |
|
CEN EN 14743 |
Water conditioning equipment inside buildings - Softeners - Requirements for performance, safety and testing-Incorporates Amendment A1:6/2007 |
|
CEN EN 14865-2 |
Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h |
|
CEN EN 14870-2 |
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges |
|
CEN EN 14915 |
Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking-Incorporating corrigendum July 2007 |
|
CEN EN 14935 |
Copper and copper alloys - Determination of impurities in pure copper - ET AAS method |
|
CEN EN 14936-2 |
Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method |
|
CEN EN 14937-2 |
Copper and copper alloys - Determination of antimony content - Part 2: FAAS method |
|
CEN EN 14940-2 |
Copper and copper alloys - Determination of chromium content - Part 2: FAAS method |
|
CEN EN 14942-2 |
Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method |
|
CEN EN 14951 |
Solid hardwood panelling and cladding - Machined profiles elements |
|
CEN EN 14981 |
Surface active agents - Determination of content of high boiling solvents in liquid detergents by GLC |
|
CEN EN 14998 |
Derivatives from coal pyrolysis - Coal tar based oils: fluxings oils - Specifications and test methods |
|
CEN EN 15022-3 |
Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS) |
|
CEN EN 1503-2 |
Valves - Materials for Bodies, Bonnets and Covers - Part 2: Steels Other Than Those Specified in European Standards |
|
CEN EN 1503-3 |
Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards-Incorporating corrigendum March 2001 |
|
CEN EN 15054 |
Non fatty foods - Determination of chlormequat and mepiquat - LC-MS method |
|
CEN EN 15062 |
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions-: 1998 |
|
CEN EN 15086 |
Foodstuffs Determination of isomalt, lactitol, maltitol, mannitol, sorbitol and xylitol in foodstuffs |
|
CEN EN 15137 |
Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject to limitation - Determination of NOGE and its hydroxy and chlorinated derivatives |
|
CEN EN 15158 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude |
|
CEN EN 15159-2 |
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock |
|
CEN EN 15159-3 |
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 3: Thermal shock resistance |
|
CEN EN 15190 |
Structural adhesives - Test methods for assessing long term durability of bonded metallic structures |
|
CEN EN 15207 |
Tanks for transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
|
CEN EN 15274 |
General purpose adhesives for structural assembly - Requirements and test methods |
|
CEN EN 15275 |
Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
|
CEN EN 1528-3 |
Fatty Food - Determination of Pesticides and Polychlorinated Biphenyls (PCBs) - Part 3: Clean-Up Methods |
|
CEN EN 15342 |
Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
|
CEN EN 1625 |
Textiles and Textile Products - Burning Behaviour of Industrial and Technical Textiles - Procedure to Determine the Ignitability of Vertically Oriented Specimens |
|
CEN EN 1674 |
Food Processing Machinery - Dough and Pastry Brakes - Safety and Hygiene Requirements |
|
CEN EN 1719 |
Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Tack Mesurement for Pressure-Sensitive Adhesives - Determination of Loop Tack |
|
CEN EN 1721 |
Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Tack Measurement for Pressure Sensitive Adhesives - Determination of Rolling Ball Tack |
|
CEN EN 1734 |
Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Water Penetration - Low-Pressure Method |
|
CEN EN 1765 |
Rubber Hose Assemblies for Oil Suction and Discharge Services - Specification for the Assemblies |
|
CEN EN 1780-3 |
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical composition |
|
CEN EN 1845 |
Footwear Manufacturing Machines - Footwear Moulding Machines - Safety Requirements |
|
CEN EN 1860-3 |
Appliances, solid fuels and firelighters for barbecuing - Part 3 : Firelighters for igniting solid fuels for use in barbecue appliances - Requirements and test methods-Incorporates Amendment 1: February 2006 |
|
CEN EN 1870-10 |
Safety of woodworking machines Circular sawing machines Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
|
CEN EN 1870-4 |
Safety of Woodworking Machines - Circular Sawing Machines - Part 4: Multiblade Rip Sawing Machines with Manual Loading and/or Unloading |
|
CEN EN 1876-1 |
Rubber- or Plastics-Coated Fabrics - Low-Temperature Tests - Part 1: Bending Test |
|
CEN EN 1876-2 |
Rubber- or Plastics-Coated Fabrics - Low Temperature Tests - Part 2: Impact Test on Loop |
|
CEN EN 1884 |
Feather and Down - Test Methods - Determination of Microbiological State-Ratified European Text |
|
CEN EN 1894 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens-Supersedes ENV 1894:1996 |
|
CEN EN 1895 |
Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - 180 Degrees - |
|
CEN EN 1903 |
Adhesives - Test Method for Adhesives for Plastic or Rubber Floor Coverings or Wall Coverings - Determination of Dimensional Changes After Accelerated Ageing adhesives |
|
CEN EN 1905 |
Plastics Piping Systems - Unplasticized Poly(Vinyl Chloride) (PVC-U) Pipes, Fittings and Material - Method for Assessment of the PVC Content Based on Total Chlorine Content |
|
CEN EN 1912 |
Structural timber - Strength classes - Assignment of visual grades and species-Incorporates Amendment A1: February 2007 |
|
CEN EN 1939 |
Self adhesive tapes Determination of peel adhesion properties |
|
CEN EN 1979 |
Plastics Piping and Ducting Systems - Thermoplastics Spirally - Formed Structured-Wall Pipes - Determination of the Tensile Strength of a Seam |
|
CEN EN 1988-1 |
Foodstuffs - Determination of Sulfite - Part 1: Optimized Monier-Williams Method |
|
CEN EN 20105-C02 |
Textiles - Tests for Colour Fastness Part C02 : Colour Fastness to Washing : Test 2 |
|
CEN EN 204 |
Classification of Thermoplastic Wood Adhesives for Non-Sturctural Applications |
|
CEN EN 205 |
Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints . |
|
CEN EN 22 |
Wood Preservatives: Determination of Eradicant Action Against Hylotrupes Bajulus (Linnaeus) Larvae (Laboratory Method) |
|
CEN EN 23326 |
Hardmetals - Determination of (the Magnetization) Coercivity (ISO 3326: 1975) |
|
CEN EN 23923-1 |
Metallic Powders - Determination of Apparent Density - Part 1: Funnel Method (ISO 3923-1: 1979) |
|
CEN EN 24489 |
Sintered Hardmetals - Sampling and Testing (ISO 4489: 1978) |
|
CEN EN 24496 |
Metallic Powders - Determination of Acid Insoluble Content in Iron, Copper, Tin and Bronze Powders (ISO 4496: 1978) |
|
CEN EN 26922 |
Adhesives - Determination of Tensile Strength of Butt Joints (ISO 6922 : 1987) |
|
CEN EN 27627-5 |
Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry - Part 5: Determination of Cobalt, Iron, Manganese, Molybdenum, Nickel, Titanium and Vanadium in Contents from 0,5 to 2 % (m/m) (ISO 7627-5: 1983) |
|
CEN EN 28049 |
Ferronickel Ingots or Pieces - Sampling for Analysis |
|
CEN EN 29865 |
Textiles - Determination of Water Repellency of Fabrics by the Bundesmann Rain-Shower Test (ISO 9865 : 1991) |
|
CEN EN 302-3 |
Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength-Includes Amendment A1:2005 |
|
CEN EN 321 |
Wood-Based Panels - Determination of Moisture Resistance under Cyclic Test Conditions |
|
CEN EN 324-2 |
Wood-Based Panels - Determination of Dimensions of Boards - Part 2: Determination of Squareness and Edge Straightness |
|
CEN EN 350-2 |
Durability of Wood and Wood-Based Products - Natural Durability of Solid Wood Part 2: Guide to Natural Durability and Treatability of Selected Wood Species of Importance in Europe |
|
CEN EN 377 |
Lubricants for Applications in Appliances and Associated Controls Using Combustible Gases Except Those Designed for Use in Industrial Processes-Includes Amendment A1: 1996 |
|
CEN EN 4003 |
Aerospace series - Aluminium alloy AL-P2219-T87 - Sheet and strip 0,5 mm less than or equal to a less than or equal to 6 mm |
|
CEN EN 438(PART 1) |
Decorative High-Pressure Laminates (HPL)-Sheets Based on Thermosetting Resins-Part 1: Specifications-Superseded by EN 438-2:01/2005 and EN 438-4:01/2005 |
|
CEN EN 438-3 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates-Supersedes EN 438-1:1991 and EN 438-2:1991 |
|
CEN EN 453 |
Food Processing Machinery - Dough Mixers - Safety and Hygiene Requirements |
|
CEN EN 48 |
Wood preservatives - Determination of eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method) |
|
CENELEC EN 50162 |
Protection against corrosion by stray current from direct current systems |
|
CEN EN 524-5 |
Steel Strip Sheaths for Prestressing Tendons - Test Methods - Part 5: Determination of Tensile Load Resistance |
|
CEN EN 524-6 |
Steel Strip Sheaths for Prestressing Tendons - Test Methods - Part 6: Determination of Leaktightness (Determination of Water Loss) |
|
CEN EN 546-3 |
Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions |
|
CEN EN 546-4 |
Aluminium and Aluminium Alloys - Foil - Part 4: Special Property Requirements |
|
CEN EN 575 |
Aluminium and Aluminium Alloys - Master Alloys Produced by Melting - Specifications |
|
CEN EN 576 |
Aluminium and aluminium alloys Unalloyed aluminium ingots for remelting Specifications |
|
CEN EN 603-2 |
Aluminium and Aluminium Alloys - Wrought Forging Stock - Part 2: Mechanical Properties |
|
CEN EN 604-1 |
Aluminium and Aluminium Alloys - Cast Forging Stock - Part 1: Technical Conditions for Inspection and Delivery |
|
CEN EN 648 |
Paper and board intended to come into contact with foodstuffs Determination of the fastness of fluorescent whitened paper and board |
|
CEN EN 658-1 |
Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at Room Temperature - Part 1: Determination of Tensile Properties-Supersedes ENV 658-1:1993 |
|
CEN EN 658-3 |
Advanced Technical Ceramics Mechanical Properties of Ceramic Composites at Room Temperature Part 3: Determination of Flexural Strength-Supersedes ENV 658-3: 1992 |
|
CEN EN 675 |
Glass in Building - Determination of Thermal Transmittance (U Value) - Heat Flow Meter Method |
|
CEN EN 683-3 |
Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form |
|
CEN EN 717-2 |
Wood-based panels Determination of formaldehyde release Part 2: Formaldehyde release by the gas analysis method-Incorporating Corrigendum July 2002 |
|
CEN EN 717-3 |
Wood-Based Panels - Determination of Formaldehyde Release - Part 3: Formaldehyde Release by the Flask Method |
|
CEN EN 720-1 |
Transportable Gas Cylinders - Gases and Gas Mixtures - Part 1: Properties of Pure Gases |
|
CEN EN 820-2 |
Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation-Supersedes ENV 820-2:1992 |
|
CEN EN 843-1 |
Advanced Technical Ceramics - Monolithic Ceramics - Mechanical Properties at Room Temperature Part 1: Determination of Flexural Strength |
|
CEN EN 843-4 |
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness |
|
CEN EN 972 |
Tannery Machines - Reciprocating Roller Machines - Safety Requirements |
|
CEN EN 973 |
Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers-Includes amendment A1:2003 |
|
CEN EN 994 |
Textile Floor Coverings - Determination of the Side Length, Squareness and Straightness of Tiles |
|
CEN EN ISO 10101-2 |
Natural Gas - Determination of Water by the Karl Fischer Method - Part 2: Titration Procedure-ISO 10101-2: 1993 |
|
CEN EN ISO 10306 |
Textiles - Cotton Fibres - Evaluation of Maturity by the Air Flow Method (ISO 10306 : 1993) |
|
CEN EN ISO 10426-5 |
Petroleum and natural gas industries - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure-ISO 10426-5:2004 |
|
CEN EN ISO 10427-3 |
Petroleum and natural gas industries - Equipment for well cementing - Part 3: Performance testing of cementing float equipment-ISO 10427-3:2003 |
|
CEN EN ISO 10434 |
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries-ISO 10434:2004 |
|
CEN EN ISO 10438-1 |
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements |
|
CEN EN ISO 10439 |
Petroleum, chemical and gas service industries - Centrifugal compressors-ISO 10439: 2002 |
|
CEN EN ISO 105- E01 |
Textiles - Tests for Colour Fastness - Part E01: Colour Fastness to Water (ISO 105-E01 : 1994) |
|
CEN EN ISO 105- E02 |
Textiles - Tests for Colour Fastness - Part E02: Colour Fastness to Sea Water (ISO 105-E02 : 1994) |
|
CEN EN ISO 105-B03 |
Textiles - Tests for Colour Fastness - Part B03: Colour Fastness to Weathering: Outdoor Exposure-ISO 105-B03: 1994 |
|
CEN EN ISO 105-B06 |
Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test-ISO 105-B06: 1998; Including Amendment 1: 2002 |
|
CEN EN ISO 105-E16 |
Textiles - Tests for colour fastness - Part E16: Colour fastness to water spotting on upholstery fabrics |
|
CEN EN ISO 105-G02 |
Textiles - Tests for Colour Fastness - Part G02: Colour Fastness to Burnt-Gas Fumes-ISO 105-G02: 1993, Including Technical Corrigendum 1: 1995 |
|
CEN EN ISO 105-S01 |
Textiles - Tests for Colour Fastness - Part S01: Colour Fastness to Vulcanization: Hot Air (ISO 105-S01 : 1993) |
|
CEN EN ISO 105-X02 |
Textiles - Tests for Colour Fastness - Part X02: Colour Fastness to Carbonizing: Sulfuric Acid (ISO 105-X02 : 1993) |
|
CEN EN ISO 105-X04 |
Textiles - Tests for Colour Fastness - Part X04: Colour Fastness to Mercerizing-ISO 105-X04: 1994 |
|
CEN EN ISO 105-X07 |
Textiles - Tests for Colour Fastness - Part X07: Colour Fastness to Cross-Dyeing: Wool-ISO 105-X07: 1994 |
|
CEN EN ISO 105-X09 |
Textiles - Tests for Colour Fastness - Part X09: Colour Fastness to Formaldehyde (ISO 105-X09 : 1993) |
|
CEN EN ISO 105-X10 |
Textiles - Tests for Colour Fastness - Part X10 : Assessment of Migration of Textile Colours into Polyvinyl Choloride Coatings (ISO 105-X10 : 1993) |
|
CEN EN ISO 105-X11 |
Textiles - Tests for Colour Fastness - Part X11: Colour Fastness to Hot Pressing (ISO 105-X11 : 1994) |
|
CEN EN ISO 105-X16 |
Textiles - Tests for colour fastness - Part X16: Color fastness to rubbing - Small areas-ISO 105-X16:2001 |
|
CEN EN ISO 105-X18 |
Textiles - Tests for colour fastness - Part X18: Assessment of the potential to phenolic yellowing of materials |
|
CEN EN ISO 105-Z03 |
Textiles - Tests for Colour Fastness - Part Z03: Intercompatibility of Basic Dyes for Acrylic Fibres-ISO 105-Z03:1996 |
|
CEN EN ISO 105-Z09 |
Textiles - Tests for Colour Fastness - Part Z09: Determination of Cold Water Solubility of Water-Soluble Dyes-ISO 105-Z09: 1995 |
|
CEN EN ISO 10723 |
Natural gas - Performance evaluation for on-line analytical systems-ISO 10723:1995 |
|
CEN EN ISO 1110 |
Plastics - Polyamides - Accelerated Conditioning of Test Specimens-ISO 1110:1995 |
|
CEN EN ISO 11111-4 |
Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery-ISO 11111-4:2005; Supersedes EN ISO 11111:1995 |
|
CEN EN ISO 11376 |
Plastics - Epoxy Resins and Glycidyl Esters - Determination of Inorganic Chlorine-ISO 11376:1997 |
|
CEN EN ISO 11403-2 |
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties-ISO 11403-2:2004 |
|
CEN EN ISO 11640 |
Leather - Tests for Colour Fastness - Colour Fastness to Cycles of to-and-fro Rubbing-ISO 11640:1993 |
|
CEN EN ISO 1181 |
Fibre ropes - Manila and sisal - 3-, 4- and 8-strand ropes-ISO 1181:2004; Supersedes EN 698:1995 |
|
CEN EN ISO 11833-1 |
Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm |
|
CEN EN ISO 11833-2 |
Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm |
|
CEN EN ISO 11970 |
Specification and approval of welding procedures for production welding of steel castings |
|
CEN EN ISO 120 |
Plastics - Phenol-Formaldehyde Mouldings - Determination of Free Ammonia and Ammonium Compounds - Colorimetric Comparison Method-ISO 120:1977 |
|
CEN EN ISO 12236 |
Geosynthetics - Static puncture test (CBR test)-ISO 12236:2006 |
|
CEN EN ISO 12543-2 |
Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass-ISO 12543-2:1998 |
|
CEN EN ISO 12543-6 |
Glass in Building - Laminated Glass and Laminated Safety Glass - Part 6: Appearance-ISO 12543-6:1998 |
|
CEN EN ISO 12625-4 |
Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at break and tensile energy absorption-Supersedes EN 12625-4:1999 |
|
CEN EN ISO 12677 |
Chemical analysis of refractory products by XRF Fused cast bead method-ISO 12677:2003 |
|
CEN EN ISO 1269 |
Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water)-ISO 1269:2006 |
|
CEN EN ISO 12957-1 |
Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test-ISO 12957-1:2005 |
|
CEN EN ISO 12958 |
Geotextiles and Geotextile-Related Products - Determination of Water Flow Capacity in Their Plane-ISO 12958:1999 |
|
CEN EN ISO 13000-2 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties-ISO 13000-2: 2005 |
|
CEN EN ISO 13366-2 |
Milk - Enumeration of somatic cells - Part 2: Guidance on the operation of fluoro-opto-electronic counters-ISO 13366-2:2006 |
|
CEN EN ISO 13426-1 |
Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells-ISO 13426-1:2003 |
|
CEN EN ISO 13426-2 |
Geotextiles and geotextile-related products Strength of internal structural junctions Part 2: Geocomposites-ISO 13426-2:2005 |
|
CEN EN ISO 13427 |
Geotextiles and Geotextile-Related Products - Abrasion Damage Simulation (Sliding Block Test)-ISO 13427:1998 |
|
CEN EN ISO 13431 |
Geotextiles and Geotextile-Related Products - Determination of Tensile Creep and Creep Rupture Behaviour-ISO 13431:1999 |
|
CEN EN ISO 13437 |
Geotextiles and Geotextile-Related Products - Method for Installing and Extracting Samples in Soil, and Testing Specimens in Laboratory-ISO 13437:1998 |
|
CEN EN ISO 13503-1 |
Petroleum and natural gas industries Completion fluids and materials Part 1: Measurement of viscous properties of completion fluids-(ISO 13503-1):2003 |
|
CEN EN ISO 13503-2 |
Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations-ISO 13503-2:2006 |
|
CEN EN ISO 13626 |
Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures-ISO 13626:2003 |
|
CEN EN ISO 13631 |
Petroleum and natural gas industries Packaged reciprocating gas compressors-ISO 13631: 2002 |
|
CEN EN ISO 13935-1 |
Textiles - Seam Tensile Properties of Fabrics and Made-Up Textile Articles - Part 1: Determination of Maximum Force to Seam Rupture Using the Strip Method-ISO 13935-1:1999 |
|
CEN EN ISO 13935-2 |
Textiles - Seam Tensile Properties of Fabrics and Made-Up Textile Articles - Part 2: Determination of Maximum Force to Seam Rupture Using the Grab Method-ISO 13935-2:1999 |
|
CEN EN ISO 13937-1 |
Textiles - Tear Properties of Fabrics - Part 1: Determination of Tear Force Using Ballistic Pendulum Method (Elmendorf)-ISO 13937-1:2000 |
|
CEN EN ISO 13937-2 |
Textiles - Tear Properties of Fabrics - Part 2: Determination of Tear Force of Trouser-Shaped Test Specimens (Single Tear Method)-ISO 13937-2:2000 |
|
CEN EN ISO 14111 |
Natural Gas - Guidelines to Traceability in Analysis-ISO 14111:1997 |
|
CEN EN ISO 14310 |
Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs-ISO 14310: 2001 |
|
CEN EN ISO 14526-2 |
Plastics - Phenolic Powder Moulding Compounds (PF-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties-ISO 14526-2: 1999 |
|
CEN EN ISO 14528-3 |
Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 3: Requirements for Selected Moulding Compounds-ISO 14528-3:1999 |
|
CEN EN ISO 14530-2 |
Plastics - Unsaturated-Polyester Powder Moulding Compounds (Up-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties-ISO 14530-2: 1999 |
|
CEN EN ISO 14577-1 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method-ISO 14577-1: 2002 |
|
CEN EN ISO 14577-2 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines-ISO 14577-2: 2002 |
|
CEN EN ISO 14675 |
Milk and milk products - Guidelines for a standardized description of competitive enzyme immunoassays - Determination of aflatoxin M1 content-ISO 14675: 2003 |
|
CEN EN ISO 14852 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by analysis of evolved carbon dioxide |
|
CEN EN ISO 14855-1 |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method |
|
CEN EN ISO 14910-2 |
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties |
|
CEN EN ISO 15013 |
Plastics - Extruded sheets of polypropylene (PP) - Requirements and test methods |
|
CEN EN ISO 15023-1 |
Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis for specifications-ISO 15023-1: 2001 |
|
CEN EN ISO 15029-1 |
Petroleum and Related Products - Determination of Spray Ignition Characteristics of Fire-Resistant Fluids - Part 1: Spray Flame Persistence - Hollow-Cone Nozzle Method-ISO 15029-1:1999 |
|
CEN EN ISO 15252-2 |
Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 2: Preparation of Test Specimens and Determination of Properties-ISO 15252-2: 1999 |
|
CEN EN ISO 15252-3 |
Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 3: Requirements for Selected Moulding Compounds-ISO 15252-3: 1999 |
|
CEN EN ISO 15302 |
Animal and vegetable fats and oils - Determination of benzo[a]pyrene content - Reverse-phase high-performance liquid chromatography method |
|
CEN EN ISO 15310 |
Fibre-reinforced plastic composites - Determination of the inplane shear modulus by the plate twist method-ISO 15310:1999 |
|
CEN EN ISO 15349-2 |
Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating)-ISO 15349-2:1999 |
|
CEN EN ISO 15487 |
Textiles - Method for Assessing Appearance of Apparel and Other Textile End Products After Domestic Washing and Drying-ISO 15487:1999 |
|
CEN EN ISO 15546 |
Petroleum and natural gas industries Aluminium alloy drill pipe |
|
CEN EN ISO 15702 |
Leather - Tests for Colour Fastness - Colour Fastness to Machine Washing-ISO 15702: 1998 |
|
CEN EN ISO 15732 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method-ISO 15732:2003 |
|
CEN EN ISO 15774 |
Animal and Vegetable Fats and Oils - Determination of Cadmium Content by Direct Graphite Furnace Atomic Absorption Spectrometry-ISO 15774:2000 |
|
CEN EN ISO 15788-1 |
Animal and Vegetable Fats and Oils - Determination of Stigmastadienes in Vegetable Oils - Part 1: Method Using Capillary-Column Gas Chromatography (Reference Method)-ISO 15788-1:1999 |
|
CEN EN ISO 17078-1 |
Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels-ISO 17078-1:2004 |
|
CEN EN ISO 17078-2 |
Petroleum and natural gas industries - Drilling and production equipment - Part 2: Flow-control devices for side-pocket mandrels |
|
CEN EN ISO 17236 |
Leather - Physical and mechanical tests - Determination of extension set-ISO 17236:2002 |
|
CEN EN ISO 1736 |
Dried Milk and Dried Milk Products - Determination of Fat Content - Gravimetric Method (Reference Method)-ISO 1736: 2000 |
|
CEN EN ISO 17693 |
Footwear - Test methods for uppers - Resistance to damage on lasting-ISO 17693: 2004; Supersedes EN 13511: 2001 |
|
CEN EN ISO 177 |
Plastics - Determination of Migration of Plasticizers-ISO 177:1988 |
|
CEN EN ISO 18453 |
Natural gas - Correlation between water content and water dew point-ISO 18453:2004 |
|
CEN EN ISO 1874-2 |
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
|
CEN EN ISO 18756 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method-ISO 18756:2003 |
|
CEN EN ISO 19900 |
Petroleum and natural gas industries General requirements for offshore structures-ISO 19900:2002; Supersedes EN ISO 13819-1:1997; |
|
CEN EN ISO 20482 |
Metallic materials Sheet and strip Erichsen cupping test-ISO 20482: 2003 |
|
CEN EN ISO 2062 |
Textiles - Yarns from Packages - Determination of Single-End Breaking Force and Elongation at Break (ISO 2062 : 1993) |
|
CEN EN ISO 20743 |
Textiles - Determination of antibacterial activity of antibacterial finished products |
|
CEN EN ISO 2078 |
Textile Glass - Yarns - Designation (ISO 2078 : 1993) |
|
CEN EN ISO 21809-2 |
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Fusion-bonded epoxy coatings |
|
CEN EN ISO 22775 |
Footwear - Test methods for accessories: Metallic accessories - Corrosion resistance |
|
CEN EN ISO 2307 |
Fibre ropes - Determination of certain physical and mechanical properties-ISO 2307:2005; Supersedes EN 919:1995 |
|
CEN EN ISO 2411 |
Rubber- or Plastics-Coated Fabrics - Determination of Coating Adhesion-ISO 2411: 2000; Incorporating Corrigendum May 2000 |
|
CEN EN ISO 2417 |
Leather - Physical and mechanical tests - Determination of the static absorption of water-ISO 2417:2002 |
|
CEN EN ISO 2739 |
Sintered Metal Bushes - Determination of Radial Crushing Strength-ISO 2739:1973 |
|
CEN EN ISO 2871-2 |
Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content - Part 2: Cationic-Active Matter of Low Molecular Mass (Between 200 and 500) (ISO 2871-2:1990) |
|
CEN EN ISO 294-3 |
Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials - Part 3: Small Plates-ISO 294-3: 2002 |
|
CEN EN ISO 294-4 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage-ISO 294-4:2001 |
|
CEN EN ISO 3170 |
Petroleum liquids - Manual sampling-ISO 3170:2004; |
|
CEN EN ISO 3175-1 |
Textiles - Dry Cleaning and Finishing - Part 1: Method for Assessing the Cleanability of Textiles and Garments-ISO 3175-1:1998 |
|
CEN EN ISO 3175-4 |
Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning-ISO 3175-4:2003 |
|
CEN EN ISO 3376 |
Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension-ISO 3376:2002 |
|
CEN EN ISO 3386-1 |
Polymeric Materials, Cellular Flexible - Determination of Stress-Strain Characteristic in Compression - Part 1: Low-Density Materials-ISO 3386-1: 1986 |
|
CEN EN ISO 3451-4 |
Plastics - Determination of Ash - Part 4: Polyamides-ISO 3451-4: 1998 |
|
CEN EN ISO 3656 |
Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction (ISO 3656:2002) |
|
CEN EN ISO 3672-2 |
Plastics - Unsaturated-Polyester Resins (UP-R) - Part 2: Preparation of Test Specimens and Determination of Properties-ISO 3672-2:2000 |
|
CEN EN ISO 3759 |
Textiles Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change-ISO 3759:1994 |
|
CEN EN ISO 385 |
Laboratory glassware - Burettes-ISO 385:2005 |
|
CEN EN ISO 3915 |
Plastics - Measurement of Resistivity of Conductive Plastics-ISO 3915:1981 |
|
CEN EN ISO 3961 |
Animal and Vegetable Fats and Oils - Determination of Iodine Value-ISO 3961: 1996 |
|
CEN EN ISO 3993 |
Liquefied Petroleum Gas and Light Hydrocarbons - Determination of Density or Relative Density - Pressure Hydrometer Method; (ISO 3993 : 1984) |
|
CEN EN ISO 4022 |
Permeable sintered metal materials - Determination of fluid permeability-ISO 4022:1987 |
|
CEN EN ISO 4167 |
Polyolefin agricultural twines-ISO 4167:2006;:1996 |
|
CEN EN ISO 4263-2 |
Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 2: Procedure for category HFC hydraulic fluids-ISO 4263-2:2003 |
|
CEN EN ISO 4267-2 |
Petroleum and Liquid Petroleum Products - Calculation of Oil Quantities - Part 2: Dynamic Measurement (ISO 4267-2 : 1988) |
|
CEN EN ISO 4404-2 |
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids-ISO 4404-2:2003 |
|
CEN EN ISO 4614 |
Plastics - Melamine-Formaldehyde Mouldings - Determination of Extractable Formaldehyde-ISO 4614:1977 |
|
CEN EN ISO 4651 |
Cellular Rubbers and Plastics - Determination of Dynamic Cushioning Performance (ISO 4651 : 1988) |
|
CEN EN ISO 4674-1 |
Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods-ISO 4674-1: 2003 |
|
CEN EN ISO 483 |
Plastics - Small Enclosures for Conditioning and Testing Using Aqueous Solutions to Maintain the Humidity at a Constant Value-ISO 483:2005 |
|
CEN EN ISO 4894-1 |
Plastics - Styrene/Acrylonitrile (SAN) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-ISO 4894-1:1997 |
|
CEN EN ISO 5398-1 |
Leather - Chemical determination of chromic oxide content - Part 1: Quantification by titration |
|
CEN EN ISO 5398-3 |
Leather - Chemical determination of chromic oxide content - Part 3: Quantification by atomic absorption spectrometry |
|
CEN EN ISO 5402 |
Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method-ISO 5402:2002 |
|
CEN EN ISO 5470-2 |
Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader-ISO 5470-2:2003 |
|
CEN EN ISO 5495 |
Sensory analysis - Methodology - Paired comparison test |
|
CEN EN ISO 5509 |
Animal and Vegetable Fats and Oils - Preparation of Methyl Esters of Fatty Acids-ISO 5509: 2000 |
|
CEN EN ISO 6142 |
Gas analysis - Preparation of calibration gas mixtures - Gravimetric method |
|
CEN EN ISO 6551 |
Petroleum Liquids and Gases - Fidelity and Security of Dynamic Measurement - Cabled Transmission of Electric and/or Electronic Pulsed Data (ISO 6551 : 1982) |
|
CEN EN ISO 6647-2 |
Rice - Determination of amylose content - Part 2: Routine methods |
|
CEN EN ISO 665 |
Oilseeds - Determination of Moisture and Volatile Matter Content-ISO 665:2000 |
|
CEN EN ISO 6800 |
Animal and Vegetable Fats and Oils - Determination of the Composition of Fatty Acids in the 2-Position of the Triglycerides Molecules-Supersedes BISO 6800:1997 |
|
CEN EN ISO 6885 |
Animal and vegetable fats and oils - Determination of anisidine value |
|
CEN EN ISO 6975 |
Natural gas Extended analysis Gas-chromatographic method-(ISO 6975):1997 |
|
CEN EN ISO 6978-2 |
Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy-ISO 6978-2:2003 |
|
CEN EN ISO 734-1 |
Oilseed meals - Determination of oil content - Part 1: Extraction method with hexane (or light petroleum)-ISO 734-1: 2006 |
|
CEN EN ISO 7539-1 |
Corrosion of Metals and Alloys - Stress Corrosion Testing - Part 1: General Guidance on Testing Procedures (ISO 7539-1: 1987) |
|
CEN EN ISO 7539-7 |
Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing-ISO 7539-7:2005 |
|
CEN EN ISO 7822 |
Textile Glass Reinforced Plastics - Determination of Void Content - Loss on Ignition, Mechanical Disintegration and Statistical Counting Methods-ISO 7822:1990 |
|
CEN EN ISO 7854 |
Rubber- or Plastics-Coated Fabrics - Determination of Resistance to Damage by Flexing |
|
CEN EN ISO 8028 |
Rubber and/or Plastics Hoses and Hose Assemblies for Airless Paint Spraying - Specification-ISO 8028:1999; Supersedes EN 28028:1993 |
|
CEN EN ISO 8222 |
Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks-ISO 8222:2002 |
|
CEN EN ISO 8257-2 |
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties-ISO 8257:2001 |
|
CEN EN ISO 8295 |
Plastics Film and sheeting Determination of the coefficients of friction-ISO 8295:1995 |
|
CEN EN ISO 8307 |
Flexible cellular polymeric materials - Determination of resilience by ball rebound |
|
CEN EN ISO 8442-7 |
Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware - Part 7: Specification for Table Cutlery Made of Silver, Other Precious Metals and Their Alloys-ISO 8442-7:2000 |
|
CEN EN ISO 8495 |
Metallic materials - Tube - Ring-expanding test-ISO 8495:1998; Supersedes EN 10236:1993 |
|
CEN EN ISO 8892 |
Oilseed Residues - Determination of Total Residual Hexane (ISO 8892 : 1987) |
|
CEN EN ISO 8968-4 |
Milk - Determination of Nitrogen Content - Part 4: Determination of Non-Protein Nitrogen Content-ISO 8968-4: 2001 |
|
CEN EN ISO 899-1 |
Plastics - Determination of creep behaviour - Part 1: Tensile creep-ISO 899-1:2003 |
|
CEN EN ISO 9073-9 |
Textiles - Test Methods for Nonwovens - Part 9: Determination of Drape Coefficient-ISO 9073-9:1995 |
|
CEN EN ISO 9311-2 |
Adhesives for Thermoplastic Piping Systems - Part 2: Determination of Shear Strength-ISO 9311-2:2002 |
|
CEN EN ISO 9311-3 |
Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure-ISO 9311-3:2005 |
|
CEN EN ISO 9513 |
Metallic materials - Calibration of extensometers used in uniaxial testing-ISO 9513: 1999 |
|
CEN EN ISO 9902-6 |
Textile Machinery - Noise Test Code - Part 6: Fabric Manufacturing Machinery-ISO 9902-6:2001 |
|
CEN ENV 10 080 |
Steel for the Reinforcement of Concrete - Weldable Ribbed Reinforcing Steel B 500 - Technical Delivery Conditions for Bars, Coils and Welded Fabric |
|
CEN ENV 1156 |
Wood-Based Panels - Determination of Duration of Load and Creep Factors |
|
CEN ENV 12 282 |
Paper - Printing and Business Paper - Determination of Edge Dust |
|
CEN ENV 12169 |
Criteria for the Assessment of Conformity of a Lot of Sawn Timber |
|
CEN ENV 14186 |
Advanced technical ceramics - Ceramic composites - Mechanical properties at room temperature, determination of elastic properties by an ultrasonic technique |
|
CEN ENV 14273 |
Advanced Technical Ceramics - Ceramic Powders - Determination of Crystalline Phases in Zirconia |
|
CEN ENV 14464 |
Sawn timber - Methods for assessment of case-hardening |
|
CEN ENV 839 |
Wood Preservatives - Determination of the Protective Effectiveness Against Wood Destroying Basidiomycetes - Application by Surface Treatment |
|
CEN CEN/TR 14839 |
Wood preservatives - Determination of the preventive efficacy against wood destroying basidiomycetes fungi |
|
CEN CEN/TR 15314 |
Durability of wood and wood-based products - Quantitative determination of quaternary ammonium compounds in wood |
|
CEN CEN/TR 15641 |
Food analysis - Determination of pesticide residues by LCMS/MS - Tandem mass spectrometric parameters |
|
CEN CEN/TS 12037 |
Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact - Horizontal lap-joint method |