|
CEN CEN/TS 13130-11 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 11: Determination of 11- aminoundecanoic acid in food simulants |
|
CEN CEN/TS 13130-28 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 28: Determination of 1,1,1-trimethylolpropane in food simulants |
|
CEN CEN/TS 13354 |
Solid wood panels - Bonding quality - Test method |
|
CEN CEN/TS 14235 |
Material and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration |
|
CEN CEN/TS 14416 |
Geosynthetic barriers - Test method for determining the resistance to roots |
|
CEN CEN/TS 14418 |
Geosynthetic barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers |
|
CEN CEN/TS 14779 |
Solid biofuels - Sampling - Methods for preparing sampling plans and sampling certificates |
|
CEN CEN/TS 14780 |
Solid biofuels - Methods for sample preparation |
|
CEN CEN/TS 15025 |
Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometry method (FAAS) |
|
CEN CEN/TS 15104 |
Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods |
|
CEN CEN/TS 15105 |
Solid biofuels - Methods for determination of the water soluble content of chloride, sodium and potassium |
|
CEN CEN/TS 15149-2 |
Solid biofuels Methods for the determination of particle size distribution Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below |
|
CEN CEN/TS 15210-2 |
Solid biofuels - Methods for the determination of mechanicaldurability of pellets and briquettes - Part 2: Briquettes |
|
CEN CEN/TS 15289 |
Solid Biofuels - Determination of total content of sulphur and chlorine |
|
CEN CEN/TS 15359 |
Solid Recovered Fuels - Specifications and Classes |
|
CEN CEN/TS 15401 |
Solid recovered fuels - Methods for the determination of bulk density |
|
CEN CEN/TS 15403 |
Solid recovered fuels - Methods for the determination of ash content |
|
CEN CEN/TS 15410 |
Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) |
|
CEN CEN/TS 15414-1 |
Solid recovered fuels Determination of moisture content using the oven dry method Part 1: Determination of total moisture by a reference method |
|
CEN CEN/TS 15414-3 |
Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample |
|
CEN CEN/TS 15440 |
Solid recovered fuels - Method for the determination of biomass content |
|
CEN CEN/TS 15506 |
Foodstuffs - Determination of trace elements - Determination of tin in fruit and vegetables preserved in cans by flame atomic absorption spectrometry (AAS) |
|
CEN CR 13388 |
Copper and Copper Alloys - Compendium of Compositions and Products |
|
CEN CR 14269 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Guidelines for the Purchase |
|
CEN EN 10047 |
Chemical Analysis of Ferrous Materials Determination of Calcium in Steels Flame Atomic Absorption Spectrometric Method |
|
CEN EN 10071 |
Chemical Analysis of Ferrous Materials Determination of Manganese in Steels and Irons Electrometric Titration Method |
|
CEN EN 1007-5 |
Advanced Technical Ceramics - Ceramic Composites - Methods of Test for Reinforcements - Part 5: Determination of Distribution of Tensile Strength and of Tensile Strain to Failure of Filaments within a Multifilament Tow at Ambient Temperature-Supersedes ENV 1007-5: 1998 |
|
CEN EN 10092-1 |
Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions |
|
CEN EN 10092-2 |
Hot rolled spring steel flat bars Part 2: Ribbed and grooved spring leaves Dimensions and tolerances on shape and dimensions |
|
CEN EN 10107 |
Grain-Oriented Electrical Steel Sheet and Strip Delivered in the Fully Processed State |
|
CEN EN 1014-1 |
Wood Preservatives - Creosote and Creosoted Timber - Methods of Sampling and Analysis - Part 1: Procedure for Sampling Creosote |
|
CEN EN 10179 |
Chemical Analysis of Ferrous Materials Determination of Nitrogen (Trace Mounts) in Steel Spectrophotometric Method |
|
CEN EN 1018 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Calcium Carbonate |
|
CEN EN 10211 |
Chemical Analysis of Ferrous Materials - Determination of Titanium in Steel and Iron - Flame Atomic Absorption Spectrometric Method |
|
CEN EN 10212 |
Chemical Analysis of Ferrous Materials - Determination of Arsenic in Steel and Iron - Spectrophotometric Method |
|
CEN EN 10222-2:1999/AC |
Steel Forgings for Pressure Purposes - Part 2: Ferritic and Martensitic Steels with Specified Elevated Temperature Properties-Ratified European Text |
|
CEN EN 10223-2 |
Steel Wire and Wire Products for Fences - Part 2: Hexagonal Steel Wire Netting for Agricultural, Insulation and Fencing Purposes-(Includes Amendment A1:2004) |
|
CEN EN 10223-3 |
Steel Wire and Wire Products for Fences - Part 3: Hexagonal Steel Wire Netting for Engineering Purposes |
|
CEN EN 10229 |
Evaluation of Resistance of Steel Products to Hydrogen Induced Cracking (HIC) |
|
CEN EN 10244-6 |
Steel Wire and Wire Products - Non-Ferrous Metallic Coatings on Steel Wire - Part 6: Copper, Bronze or Brass Coatings |
|
CEN EN 10245-4 |
Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
|
CEN EN 10246-6 |
Non-Destructive Testing of Steel Tubes - Part 6: Automatic Full Peripheral Ultrasonic Testing of Seamless Steel Tubes for the Detection of Transverse Imperfections |
|
CEN EN 10257-1 |
Zinc or Zinc Alloy Coated Non-Alloy Steel Wire for Armouring Either Power Cables or Telecommunication Cables - Part 1: Land Cables |
|
CEN EN 10271 |
Electrolytically Zinc-Nickel (ZN) Coated Steel Flat Products - Technical Delivery Conditions-Ratified European Text |
|
CEN EN 10306 |
Iron and Steel - Ultrasonic Testing of H Beams with Parallel Flanges and IPE Beams |
|
CEN EN 10319-1 |
Metallic materials Tensile stress relaxation testing Part 1: Procedure for testing machines |
|
CEN EN 10325 |
Steel - Determination of yield strength increase by the effect of heat treatment [Bake-Hardening-Index] |
|
CEN EN 1035 |
Tannery Machines - Moving Platen Machinery - Safety Requirements-Incorporating Corrigendum July 2002 |
|
CEN EN 1036 |
Glass in Building - Mirrors from Silver-Coated Float Glass for Internal Use |
|
CEN EN 1049-2 |
Textiles - Woven Fabrics - Construction - Methods of Analysis - Part 2: Determination of Number of Threads per Unit Length (ISO 7211-2:1984 Modified) |
|
CEN EN 1072 |
Plywood - Description of Bending Properties for Structural Plywood |
|
CEN EN 1096-2 |
Glass in Building - Coated Glass - Part 2: Requirements and Test Methods for Class A, B and S Coatings |
|
CEN EN 1101 |
Textiles and textile products Burning behaviour Curtains and drapes Detailed procedure to determine the ignitability of vertically oriented specimens (small flame)-Includes Amendment A1:2005 |
|
CEN EN 1114-1 |
Rubber and Plastics Machines - Extruders and Extrusion Lines - Part 1: Safety Requirements for Extruders |
|
CEN EN 1122 |
Plastics - Determination of Cadmium - Wet Decomposition Method-Supersedes ENV 1122:1995 |
|
CEN EN 1159-1 |
Advanced technical ceramics Ceramic composites Thermophysical properties Part 1: Determination of thermal expansion |
|
CEN EN 1160 |
Installations and Equipment for Liquefied Natural Gas - General Characteristics of Liquefied Natural Gas |
|
CEN EN 1161 |
Feather Down - Test Methods - Determination of Moisture Content |
|
CEN EN 117 |
Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) |
|
CEN EN 1186-12 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 12: Test Methods for Overall Migration at Low Temperatures-Supersedes ENV 1186-12: 1995 |
|
CEN EN 1186-2 |
Materials and Articles in Contact with Foodstuffs - Plastics - Part 2: Test Methods for Overall Migration into Olive Oil by Total Immersion-Supersedes ENV 1186-2: 1994 |
|
CEN EN 1198 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Dihydrogen Orthophosphate |
|
CEN EN 12012-4 |
Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators |
|
CEN EN 1202 |
Chemicals used for treatment of water intended for human consumption - Dipotassium hydrogen orthophosphate |
|
CEN EN 12031 |
Self-Adhesive Tapes - Measurement of Bursting Strength |
|
CEN EN 12034 |
Self-Adhesive Tapes - Measurement of the Length of a Roll of Adhesive Tape |
|
CEN EN 12036 |
Self-Adhesive Tapes - Solvent Penetration into Adhesive Masking Tapes |
|
CEN EN 1206 |
Chemicals used for treatment of water intended for human consumption - Tetrasodium pyrophosphate |
|
CEN EN 1208 |
Chemicals used for treatment of water intended for human consumption - Sodium calcium polyphosphate |
|
CEN EN 1212 |
Chemicals used for treatment of water intended for human consumption - Sodium polyphosphate |
|
CEN EN 12124 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Sulfite |
|
CEN EN 12127 |
Textiles - Fabrics - Determination of Mass Per Unit Area Using Small Samples |
|
CEN EN 12130 |
Feather and Down - Test Methods - Determination of the Filling Power (Massive Volume) |
|
CEN EN 12132-1 |
Feather and Down - Methods of Testing the Down-Proof Properties of Fabrics - Part 1: Rubbing Test |
|
CEN EN 12139 |
Surface Active Agents - Determination of the Total Polyethylene Glycol Content of Non-Ionic Surface Active Agents (EO Adducts) by HPLC/GPC |
|
CEN EN 12143 |
Fruit and Vegetable Juices - Estimation of Soluble Solids Content - Refractometric Method |
|
CEN EN 12147 |
Fruit and Vegetable Juices - Determination of Titratable Acidity |
|
CEN EN 12174 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Hexafluorosilicate |
|
CEN EN 12175 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Hexafluorosilicic Acid |
|
CEN EN 1218-3 |
Safety of Woodworking Machines - Tenoning Machines - Part 3: Hand Fed Tenoning Machines with Sliding Table for Cutting Structural Timbers |
|
CEN EN 12224 |
Geotextiles and Geotextile-Related Products - Determination of the Resistance to Weathering |
|
CEN EN 12226 |
Geotextiles and Geotextile-Related Products - General Tests for Evaluation Following Durability Testing |
|
CEN EN 1226 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Test Method to Prove the Resistance to Initial Ring Deflection |
|
CEN EN 1228 |
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of Initial Specific Ring Stiffness |
|
CEN EN 12290 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties |
|
CEN EN 12332-2 |
Rubber- or plastic-coated fabrics Determination of bursting strength Part 2: Hydraulic method |
|
CEN EN 12353 |
Chemical Disinfectants and Antiseptics - Preservation of Microbial Strains Used for the Determination of Bactericidal and Fungicidal Activity |
|
CEN EN 12373-11 |
Aluminium and Aluminium Alloys - Anodizing - Part 11: Measurement of Specular Reflectance and Specular Gloss of Anodic Oxidation Coatings at Angles of 20 Degrees, 45 Degrees, 60 Degrees, and 85 Degrees |
|
CEN EN 1238 |
Adhesives - Determination of the Softening Point of Thermoplastic Adhesives (Ring and Ball) |
|
CEN EN 12384 |
Copper and Copper Alloys - Determination of Spring Bending Limit on Strip |
|
CEN EN 12385-10 |
Steel wire ropes Safety Part 10: Spiral ropes for general structural applications |
|
CEN EN 12385-2 |
Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
|
CEN EN 12385-9 |
Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons |
|
CEN EN 1239 |
Adhesives - Freeze-Thaw Stability |
|
CEN EN 12396-2 |
Non-Fatty Foods - Determination of Dithiocarbamate and Thiuram Disulfide Residues - Part 2: Gas Chromatographic Method-Ratified European Text |
|
CEN EN 12396-3 |
Non-Fatty Foods - Determination of Dithiocarbamate and Thiuram Disulfide Residues - Part 3: UV Spectrometric Xanthogenate Method |
|
CEN EN 1242 |
Adhesives - Determination of Isocyanate Content |
|
CEN EN 12423 |
Polypropylene Twines |
|
CEN EN 12438 |
Magnesium and Magnesium Alloys - Magnesium Alloys for Cast Anodes |
|
CEN EN 12441-11 |
Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method |
|
CEN EN 12441-8 |
Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method |
|
CEN EN 12441-9 |
Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method |
|
CEN EN 12469 |
Biotechnology - Performance Criteria for Microbiological Safety Cabinets |
|
CEN EN 12475-4 |
Classification of Dense Shaped Refractory Products - Part 4: Special Products |
|
CEN EN 12482-2 |
Aluminium and Aluminium Alloys - Reroll Stock for General Applications - Part 2: Specifications for Cold Rolled Reroll Stock |
|
CEN EN 12490 |
Durability of Wood and Wood-Based Products - Preservative-Treated Solid Wood - Determination of the Penetration and Retention of Creosote in Treated Wood |
|
CEN EN 12518 |
Chemicals Used for Treatment of Water Intended for Human Consumption - High-Calcium Lime |
|
CEN EN 12546-1 |
Materials and Articles in Contact with Foodstuffs - Insulated Containers for Domestic Use - Part 1: Specification for Vacuum Ware, Insulated Flasks and Jugs-Incorporating Corrigendum March 2005 |
|
CEN EN 12546-3 |
Materials and Articles in Contact with Foodstuffs - Insulated Containers for Domestic Use - Part 3: Specification for Thermal Packs |
|
CEN EN 12583 |
Gas Supply Systems - Compressor Stations - Functional Requirements |
|
CEN EN 12603 |
Glass in building - Procedures for goodness of fit and confidence intervals for Weilbull distibuted glass strength data |
|
CEN EN 12625-4 |
Tissue Paper and Tissue Products - Part 4: Determination of Tensile Strength, Stretch at Break and Tensile Energy Absorption-Superseded by EN ISO 12625-4:2005 |
|
CEN EN 12631 |
Fruit and Vegetable Juices - Enzymatic Determination of D-and L-Lactic Acid (Lactate) Content - NAD Spectrometric Method |
|
CEN EN 12632 |
Fruit and Vegetable Juices - Enzymatic Determination of Acetic Acid (Acetate) Content - NAD Spectrometric Method |
|
CEN EN 12634 |
Petroleum Products and Lubricants - Determination of Acid Number - Non-Aqueous Potentiometric Titration Method-Ratified European Text |
|
CEN EN 12654-2 |
Textile Glass - Yarns - Part 2: Methods of Test and General Specifications-Ratified European Text |
|
CEN EN 12705 |
Adhesives for Leather and Footwear Materials - Determination of Colour Change of White or Bright Coloured Leather Surfaces by Migration |
|
CEN EN 12744 |
Footwear - Test Methods For Insoles - Delamination Resistance |
|
CEN EN 12749 |
Footwear - Ageing Conditioning |
|
CEN EN 12765 |
Classification of Thermosetting Wood Adhesives for Non-Structural Applications |
|
CEN EN 12771 |
Footwear - Test Methods for Outsoles - Tear Strength |
|
CEN EN 1278 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Ozone |
|
CEN EN 1279-4 |
Glass in building Insulating glass units Part 4: Methods of test for the physical attributes of edge seals |
|
CEN EN 12821 |
Foodstuffs - Determination of Vitamin D by High Performance Liquid Chromatography - Measurement of Cholecalciferol (D3) and Ergocalciferol (D2) |
|
CEN EN 12823-1 |
Foodstuffs - Determination of Vitamin E by High Performance Liquid Chromatography - Part 1: Measurement of All-Trans-Retinol and 13-Cis-Retinol |
|
CEN EN 12852 |
Food Processing Machinery - Food Processors and Blenders - Safety and Hygiene Requirements |
|
CEN EN 12855 |
Food processing machinery Rotating bowl cutters Safety and hygiene requirements |
|
CEN EN 12857 |
Foodstuffs - Determination of Cyclamate - High Performance Liquid Chromatographic Method |
|
CEN EN 12861 |
Copper and Copper Alloys - Scrap |
|
CEN EN 12875-2 |
Mechanical Dishwashing Resistance of Utensils - Part 2: Inspection of Non-Metallic Articles |
|
CEN EN 12876 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Oxygen |
|
CEN EN 12905 |
Products Used for Treatment of Water Intended for Human Consumption - Expanded Aluminosilicate |
|
CEN EN 12906 |
Products used for treatment of water intended for human consumption - Pumice |
|
CEN EN 12923-1 |
Advanced Technical Ceramics - Monolithic Ceramics - Part 1: General Practice for Undertaking Corrosion Tests |
|
CEN EN 12926 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Peroxodisulfate |
|
CEN EN 12931 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Chemicals for Emergency use - Sodium Dichloroisocyanurate, Anhydrous |
|
CEN EN 12932 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Chemicals for Emergency Use - Sodium Dichloroisocyanurate, Dihydrate |
|
CEN EN 12934 |
Feather and Down - Composition Labelling of Processed Feathers and Down for Use as Sole Filling Material |
|
CEN EN 12938 |
Methods for the Analysis of Pewter - Determination of Alloying and Impurity Element Contents by Atomic Spectrometry-Incorporating Corrigendum: August 2000 |
|
CEN EN 12955 |
Foodstuffs - Determination of Aflatoxin B1, and the Sum of Aflatoxins B1, B2, G1 and G2 in Cereals, Shell-Fruits and Derived Products - High Performance Liquid Chromatographic Method with Post Column Derivatization and Immunoaffinity Column Clean up |
|
CEN EN 12959 |
Footwear - Test Methods for Shanks - Longitudinal Stiffness |
|
CEN EN 12971-3 |
Reinforcements - Specification for Textile Glass Chopped Strands - Part 3: Specific Requirements |
|
CEN EN 13003-1 |
Para- Aramid Fibre Filament Yarns - Part 1: Designation |
|
CEN EN 13003-2 |
Para-Aramid Fibre Filament Yarns - Part 2: Methods of Test and General Specifications |
|
CEN EN 13003-3 |
Para-Aramid Fibre Filament Yarns - Part 3: Technical Specifications |
|
CEN EN 1301-3 |
Aluminium and Aluminium Alloys - Drawn Wire - Part 3: Tolerances on Dimensions |
|
CEN EN 13022-1 |
Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing |
|
CEN EN 13022-2 |
Glass in building - Structural sealant glazing - Part 2: Assembly rules |
|
CEN EN 13035-3 |
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines |
|
CEN EN 1307 |
Textile Floor Coverings - Classification of Pile Carpets |
|
CEN EN 1308 |
Adhesives for tiles - Determination of slip |
|
CEN EN 1309-2 |
Round and sawn timber - Method of measurement of dimensions - Part 2: Round timber - Requirements for measurement and volume calculation rules |
|
CEN EN 13130-3 |
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part3: Determination of acrylonitrile in food and food simulants |
|
CEN EN 13130-5 |
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 5: Determination of vinylidene chloride in food simulants |
|
CEN EN 13130-8 |
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 8: Determination of isocyanates in plastics |
|
CEN EN 13132 |
Liquid Petroleum Products - Unleaded Petrol - Determination of Organic Oxygenate Compounds and Total Organically Bound Oxygen Content by Gas Chromatography Using Column Swiching-Ratified European Text |
|
CEN EN 1313-2 |
Corr 1 Round and Sawn Timber - Permitted Deviations and Preferred Sizes - Part 2: Hardwood Sawn Timber-Incorporating Corrigendum June 1999 |
|
CEN EN 13145 |
Railway Applications - Track - Wood Sleepers and Bearers |
|
CEN EN 1316-2 |
Hardwood Round Timber - Qualitative Classification - Part 2: Poplar |
|
CEN EN 13179-1 |
Test for Filler Aggregate Used in Bituminous Mixtures - Part 1: Delta Ring and Ball Test |
|
CEN EN 13183-1 |
Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method-Incorporating corrigendum September 2003 |
|
CEN EN 13206 |
Covering Thermoplastic Films for Use in Agriculture and Horticulture |
|
CEN EN 13208 |
Food processing machinery - Vegetable peelers - Safety and hygiene requirements |
|
CEN EN 13227 |
Wood flooring - Solid lamparquet products-Incorporating corrigendum June 2007 |
|
CEN EN 13273 |
Surface Active Agents - Determination of the Content of Non-Ionic Substances in Anionic Surface Active Agents by High Performance Liquid Chromatography (HPLC) |
|
CEN EN 13283 |
Zinc and zinc alloys - Secondary zinc |
|
CEN EN 13336 |
Leather - Upholstery leather characteristics - Guide for selection of leather for furniture |
|
CEN EN 13352 |
Specification for the performance of automatic tank contents gauges |
|
CEN EN 13367 |
Ceramic machines - Safety - Transfer platforms and cars |
|
CEN EN 13379 |
Pasta Processing Plants - Spreader, Stripping and Cutting Machine, Stick Return Conveyor, Stick Magazine - Safety and Hygiene Requirements |
|
CEN EN 13417-1 |
Reinforcement - Specifications for Woven Fabrics - Part 1: Designation |
|
CEN EN 13442 |
Wood and parquet flooring and wood panelling and cladding Determination of the resistance to chemical agents |
|
CEN EN 13489 |
Wood flooring Multi-layer parquet elements |
|
CEN EN 13519 |
Footwear - Test Methods for Uppers - High Temperature Behaviour |
|
CEN EN 13570 |
Food processing machinery - Mixing machines - Safety and hygiene requirements |
|
CEN EN 13571 |
Footwear Test methods for uppers, lining and insocks Tear strength-Incorporating Corrigendum December 2003 |
|
CEN EN 13585 |
Foodstuffs - Determination of Fumonisins B1 and B2 in Maize - HPLC Method with Solid Phase Extraction Clean-Up |
|
CEN EN 13630-7 |
Explosives for civil uses - Detonating cords and safety fuses - Part 7: Determination of reliability of initiation of detonating cords |
|
CEN EN 13630-8 |
Explosives for civil uses - Detonating cords and safety fuses - Part 8: Determination of resistance to water of detonating cords and safety fuses |
|
CEN EN 13631-1 |
Explosives for civil uses - High explosives - Part 1: Requirements |
|
CEN EN 13655 |
Plastics Mulching thermoplastic films for use in agriculture and horticulture |
|
CEN EN 13658-1 |
Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering |
|
CEN EN 13658-2 |
Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering |
|
CEN EN 13675 |
Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
|
CEN EN 13677-3 |
Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements |
|
CEN EN 13708 |
Foodstuffs - Detection of Irradiated Food Containing Crystalline Sugar by ESR Spectroscopy |
|
CEN EN 13719 |
Geotextiles and geotextile-related products - Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers |
|
CEN EN 13751 |
Foodstuffs - Detection of irradiated food using photostimulated luminescence |
|
CEN EN 13758-2 |
Textiles - Solar UV protective properties - Part 2: Classification and marking of apparel-Incorporates Amendment A1 |
|
CEN EN 13763-24 |
Explosives for civil uses Detonators and relays Part 24: Determination of the electrical non-conductivity of shock tube |
|
CEN EN 13772 |
Textiles and textile products - Burning behaviour - Curtains and drapes - Measurement of flame spread of vertically oriented specimens with large ignition source |
|
CEN EN 1378 |
Foodstuffs - Determination of Aspartame in Table Top Sweetener Preparations - Method by High Performance Liquid Chromatography |
|
CEN EN 13784 |
Foodstuffs - DNA Comet Assay for the Detection of Irradiated Foodstuffs - Screening Method |
|
CEN EN 13805 |
Foodstuffs - Determination of Trace Elements - Pressure Digestion |
|
CEN EN 1383 |
Timber Structures - Test Methods - Pull-Through Resistance of Timber Fasteners |
|
CEN EN 13835 |
Founding Austenitic cast irons-Includes amendment A1: June 2006 |
|
CEN EN 13887 |
Structural adhesives Guidelines for surface preparation of metals and plastics prior to adhesive bonding |
|
CEN EN 13900-1 |
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction |
|
CEN EN 13900-5 |
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test |
|
CEN EN 13920-1 |
Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests |
|
CEN EN 13920-5 |
Aluminium and aluminium alloys Scrap Part 5: Scrap consisting of two or more wrought alloys of the same series |
|
CEN EN 13920-7 |
Aluminium and aluminium alloys Scrap Part 7: Scrap consisting of castings |
|
CEN EN 13920-9 |
Aluminium and aluminium alloys Scrap Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials |
|
CEN EN 13981-3 |
Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings |
|
CEN EN 13999-1 |
Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure-Incorporating corrigendum October 2007 |
|
CEN EN 14020-2 |
Reinforcements Specification for textile glass rovings Part 2: Methods of test and general requirements |
|
CEN EN 14020-3 |
Reinforcements Specification for textile glass rovings Part 3: Specific requirements |
|
CEN EN 1402-2 |
Unshaped refractory products - Part 2: Sampling for testing-Supersedes ENV 1402-2:1997 |
|
CEN EN 1402-5 |
Unshaped refractory products Part 5: Preparation and treatment of test pieces-Supersedes ENV 1402-5: 1999; |
|
CEN EN 1402-8 |
Unshaped refractory products Part 8: Determination of complementary properties-Supersedes ENV 1402-8:1999 |
|
CEN EN 14035-2 |
Fireworks Part 1: Categorisation |
|
CEN EN 14035-23 |
Fireworks Part 23: Non-hand-held sparklers - Specification and test methods |
|
CEN EN 14035-31 |
Fireworks - Part 31: Shell-in-mortars - Specification and test methods |
|
CEN EN 14035-38 |
Fireworks - Part 38: Shot tubes - Specification and test methods |
|
CEN EN 1406 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Modified Starches |
|
CEN EN 14083 |
Foodstuffs Determination of trace elements Determination of lead, cadmium, chromium and molybdenum by graphite furnace atomic absorption spectrometry (GFAAS) after pressure digestion |
|
CEN EN 14084 |
Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion |
|
CEN EN 14118-2 |
Reinforcement Specifications for textile glass mats (chopped strand and continuous filament mats) Part 2: Methods of test and general requirements |
|
CEN EN 14123 |
Foodstuffs - Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in hazelnuts, peanuts, pistachios, figs, and paprika powder - High performance liquid chromatographic method with post-column derivatisation and immunoaffinity column cleanup |
|
CEN EN 14152 |
Foodstuffs - Determination of vitamin B2 by HPLC-Incorporating Corrigendum December 2005 |
|
CEN EN 14259 |
Adhesives for floor coverings Requirements for mechanical and electrical performance |
|
CEN EN 14278-1 |
Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device |
|
CEN EN 14278-2 |
Textiles Determination of cotton fibre stickiness Part 2: Method using an automatic thermodetection plate device |
|
CEN EN 14292 |
Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature |
|
CEN EN 14347 |
Chemical disinfectants and antiseptics - Basic sporicidal activity - Test method and requirements (phase 1, step 1) |
|
CEN EN 14360 |
Protective clothing against rain Test method for ready made garments Impact from above with high energy droplets |
|
CEN EN 14362-1 |
Textiles - Methods for the determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible without extraction-Incorporating Corrigendum March 2005 |
|
CEN EN 14362-2 |
Textiles Methods for the determination of certain aromatic amines derived from azo colorants Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres-Incorporating Corrigendum March 2005 |
|
CEN EN 14444 |
Structural adhesives Qualitative assessment of durability of bonded assemblies Wedge rupture test-ISO 10354:1992 modified |
|
CEN EN 14519 |
Solid softwood panelling and cladding - Machined profiles with tongue and groove |
|
CEN EN 14546 |
Foodstuffs - Determination of trace elements - Determination of total arsenic by hydride generation atomic absorption spectrometry (HGAAS) after dry ashing |
|
CEN EN 14584 |
Non-destructive testing - Acoustic emmission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources |
|
CEN EN 14598-2 |
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements-Incorporating Corrigendum May 2006 |
|
CEN EN 14624 |
Performances of mobile leak detectors and of room controllers of halogenated refrigerants |
|
CEN EN 14639 |
Crude tar and crude benzole - Characteristics and test methods |
|
CEN EN 14666 |
Surface active Agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas chromatographic method |
|
CEN EN 14668 |
Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two-phase titration method-Incorporating Corrigendum May 2006 |
|
CEN EN 14680 |
Adhesives for non-pressure thermoplastic piping systems Specifications |
|
CEN EN 14704-1 |
Determination of the elasticity of fabrics - Part 1: Strip tests |
|
CEN EN 1471 |
Textile Floor Coverings - Assessment of Changes in Appearance-Amendment A1: October 2003 |
|
CEN EN 14733 |
Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control |
|
CEN EN 14761/PRA1 |
Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick |
|
CEN EN 14832 |
Petroleum and related products Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids |
|
CEN EN 14868 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems |
|
CEN EN 14880 |
Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method |
|
CEN EN 14885 |
Chemical disinfectants and antiseptics - Application of European standards for chemical disinfectants and antiseptics |
|
CEN EN 14977 |
Copper and copper alloys - Detection of tensile stress - 5 percent ammonia test |
|
CEN EN 1503-1 |
Valves - Materials for Bodies, Bonnets and Covers - Part 1: Steels Specified in European Standards |
|
CEN EN 15079 |
Copper and copper alloys - Analysis by spark source optical emission spectrometry (S-OES) |
|
CEN EN 15109 |
Surface active agents - Determination of the active matter content of alkylamidopropylbetaines |
|
CEN EN 15115 |
Textile floor coverings - Determination of sensitivity to spilled water |
|
CEN EN 15157 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude |
|
CEN EN 15257 |
Cathodic protection - Competence levels and certification of cathodic protection personnel |
|
CEN EN 1528-1 |
Fatty Food - Determination of Pesticides and Polychlorinated Biphenyls (PCBs) - Part 1: General |
|
CEN EN 15307 |
Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
|
CEN EN 15335 |
Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2 000°C |
|
CEN EN 1534 |
Wood and Parquet Flooring - Determination of Resistance to Indentation (Brinell) - Test Method |
|
CEN EN 15347 |
Plastics - Recycled Plastics - Characterisation of plastics waste |
|
CEN EN 15416-4 |
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time for one component polyurethane adhesives |
|
CEN EN 15469 |
Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection |
|
CEN EN 15471 |
Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method |
|
CEN EN 15493 |
Candles - Specification for fire safety |
|
CEN EN 1592-2 |
Aluminium and Aluminium Alloys - HF Seam Welded Tubes - Part 2: Mechanical Properties |
|
CEN EN 1592-3 |
Aluminium and Aluminium Alloys - HF Seam Welded Tubes - Part 3: Tolerances on Dimensions and Form for Circular Tubes |
|
CEN EN 1592-4 |
Aluminium and Aluminium Alloys - HF Seam Welded Tubes - Part 4: Tolerances on Dimensions and Form for Square, Rectangular and Shaped Tubes |
|
CEN EN 1611-1 |
Sawn timber - Appearance grading of softwoods - Part 1: European spruces, firs, pines, Douglas fir and larches-Includes amendment A1:2002 |
|
CEN EN 1624 |
Textiles and Textile Products - Burning Behaviour of Industrial and Technical Textiles - Procedure to Determine the Flame Spread of Vertically Oriented Specimens |
|
CEN EN 1653 |
Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units-Includes amendment A1: 2000 |
|
CEN EN 1678 |
Food Processing Machinery - Vegetable Cutting Machines - Safety and Hygiene Requirements |
|
CEN EN 1715-1 |
Aluminium and Aluminium Alloys - Drawing Stock - Part 1: General Requirements and Technical Conditions for Inspection and Delivery |
|
CEN EN 1715-2 |
Aluminium and Aluminium Alloys - Drawing Stock - Part 2: Specific Requirements for Electrical Applications |
|
CEN EN 1754 |
Magnesium and Magnesium Alloys - Magnesium and Magnesium Alloy Anodes, Ingots and Castings - Designation System |
|
CEN EN 1774 |
Zinc and Zinc Alloys - Alloys for Foundry Purposes - Ingot and Liquid |
|
CEN EN 1785 |
Foodstuffs - Detection of Irradiated Food Containing Fat - Gas Chromatographic / Mass Spectrometric Analysis of 2-Alkylcyclobutanones |
|
CEN EN 1787 |
Foodstuffs - Detection of Irradiated Food Containing Cellulose by ESR Spectroscopy-Supersedes EN 1787:1996 |
|
CEN EN 1788 |
Foodstuffs - Thermoluminescence Detection of Irradiated Food from Which Silicate Minerals Can Be Isolated |
|
CEN EN 1791 |
Surface Active Agents - Fatty Alkyl Dimethyl Amine Oxides - Determination of the Amine Oxide Content |
|
CEN EN 1813 |
Textile Floor Coverings - Determination of Wool Fibre Integrity Using an Abrasion Machine |
|
CEN EN 1847 |
Flexible Sheets for Waterproofing - Plastic and Rubber Sheets for Roof Waterproofing - Methods for Exposure to Liquid Chemicals, Including Water |
|
CEN EN 1852-1 |
Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene (PP) Part 1: Specifications for pipes, fittings and the system-Includes amendment A1: 2002 |
|
CEN EN 1870-16 |
Safety of woodworking machines Circular sawing machines Part 16: Double mitre sawing machines for V-cutting |
|
CEN EN 1870-8 |
Safety of Woodworking Machines - Circular Sawing Machines - Part 8: Single Blade Edging Circular Rip Sawing Machines with Power Driven Saw Unit and Manual Loading and/or Unloading |
|
CEN EN 1890 |
Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide |
|
CEN EN 1893 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties-Supersedes ENV 1893:1996 |
|
CEN EN 1897 |
Geotextiles and Geotextile-Related Products - Determination of the Compressive Creep Properties-Supersedes ENV 1897:1996 |
|
CEN EN 1941 |
Self Adhesive Tapes - Measurement of Elongation at Break |
|
CEN EN 1943 |
Self adhesive tapes - Measurement of static shear adhesion |
|
CEN EN 1945 |
Self Adhesive Tapes - Measurement of Quick Stick |
|
CEN EN 1965-1 |
Structural Adhesives - Corrosion - Part 1: Determination and Classification of Corrosion to a Copper Substrate-Supersedes ENV 1965-1:1995 |
|
CEN EN 1971 |
Copper and Copper Alloys - Eddy Current Test for Tubes-Ratified European Text |
|
CEN EN 1978 |
Copper and Copper Alloys - Copper Cathodes |
|
CEN EN 20105-C05 |
Textiles - Tests for Colour Fastness - Part C05 : Colour Fastness to Washing - Test 5 (ISO 105-C05 : 1989) |
|
CEN EN 20187 |
Paper, Board and Pulps - Standard Atmosphere for Conditioning and Testing and Procedure for Monitoring the Atmosphere and Conditioning of Samples (ISO 187 : 1990) |
|
CEN EN 21974 |
Paper - Determination of Tearing Resistance (Elmendorf Method) (ISO 1974:1990) |
|
CEN EN 228 |
Automotive fuels - Unleaded petrol - Requirements and test methods-Incorporating corrigendum December 2005 |
|
CEN EN 23327 |
Hardmetals - Determination of Transverse Rupture Strength (ISO 3327: 1982) |
|
CEN EN 23878 |
Hardmetals - Vickers Hardness Test (ISO 3878: 1983) |
|
CEN EN 24499 |
Hardmetals - Metallographic Determination of Microstructure (ISO 4499: 1978) |
|
CEN EN 24503 |
Hardmetals - Determination of Contents of Metallic Elements by X-Ray Fluorescence - Fusion Method (ISO 4503: 1978) |
|
CEN EN 24920 |
Textiles - Determination of Resistance to Surface Wetting (Spray Test) of Fabrics |