|
CEN EN 12331 |
Food processing machinery - Mincing machines - Safety and hygiene requirements-Includes amendment A1:2005 |
|
CEN EN 12337-1 |
Glass in Building - Chemically Strengthened Soda Lime Silicate Glass - Part 1: Definition and Description |
|
CEN EN 12355 |
Food processing machinery Derinding-, skinning- and membrane removal machines Safety and hygiene requirements |
|
CEN EN 12373-19 |
Aluminium and Aluminium Alloys - Anodizing - Part 19: Rating System for the Evaluation of Pitting Corrosion - Grid Method |
|
CEN EN 12385-3 |
Steel wire ropes - Safety - Part 3: Information for use and maintenance |
|
CEN EN 12385-4 |
Steel wire ropes Safety Part 4: Stranded ropes for general lifting applications |
|
CEN EN 12386 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Copper Sulfate |
|
CEN EN 12393-3 |
Non-Fatty Foods - Multiresidue Methods for the Gas Chromatographic Determination of Pesticide Residues - Part 3: Determination and Confirmatory Tests-Ratified European Text |
|
CEN EN 1241 |
Adhesives - Determination of Acid Value |
|
CEN EN 12421 |
Magnesium and Magnesium Alloys - Unalloyed Magnesium |
|
CEN EN 12441-10 |
Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method |
|
CEN EN 12441-6 |
Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron-Flame atomic absorption spectrometric method |
|
CEN EN 12452 |
Copper and Copper Alloys - Rolled, Finned, Seamless Tubes for Heat Exchangers |
|
CEN EN 12475-1 |
Classification of Dense Shaped Refractory Products - Part 1: Alumina-Silica Products |
|
CEN EN 12475-3 |
Classification of Dense Shaped Refractory Products - Part 3: Basic Products Containing from 7% to 30% Residual Carbon-Ratified European Text |
|
CEN EN 12497 |
Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of mercury in an aqueous extract-Supersedes ENV 12497: 1998 |
|
CEN EN 12500 |
Protection of Metallic Materials Against Corrosion - Corrosion Likelihood in Atmospheric Environment - Classification, Determination and Estimation of Corrosivity of Atmospheric Environments |
|
CEN EN 12501-1 |
Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General |
|
CEN EN 12511 |
Wood Poles for Overhead Lines - Determination of Characteristic Values |
|
CEN EN 12545 |
Footwear, Leather and Imitation Leather Goods Manufacturing Machines - Noise Test Code - Common Requirements |
|
CEN EN 12575 |
Plastics - Thermoset Moulding Compounds - Determination of the Degree of Fibre Wet out in SMC |
|
CEN EN 12582 |
Surface Active Agents - Determination of the Polyethylene Glycol Content According to Molar Mass in Non-Ionic Surface Active Agents (Ethoxylated) by HPLC/ELSD |
|
CEN EN 12590 |
Textiles - Industrial Sewing Threads Made Wholly or Partly from Synthetic Fibres |
|
CEN EN 12600 |
Glass in building - Pendulum test - Impact test method and classification for flat glass |
|
CEN EN 12654-1 |
Textile Glass - Yarns - Part 1: Designation-Ratified European Text |
|
CEN EN 12654-3 |
Textile Glass - Yarns - Part 3: General Requirements for General Applications-Ratified European Text |
|
CEN EN 12659 |
Lead and Lead Alloys - Lead |
|
CEN EN 12742 |
Fruit and Vegetable Juices - Determination of the Free Amino Acids Content - Liquid Chromatographic Method |
|
CEN EN 12743 |
Footwear - Test Methods For Outsoles - Compression Energy-Incorporating Corrigendum May 2001 |
|
CEN EN 12745 |
Footwear - Test Methods For Insoles - Heel Pin Holding Strength |
|
CEN EN 12750 |
Safety of Woodworking Machines - Four-Sided Moulding Machines |
|
CEN EN 12773 |
Footwear - Test Methods for Outsoles - Needle Tear Strength |
|
CEN EN 12774 |
Footwear - Test Methods for Outsoles - Determination of Split Tear Strength and Delamination Resistance |
|
CEN EN 1278/PRA1 |
Chemicals Used for Treatment of Water Intended for Human Consumtion - Ozone-Includes Amendment prA1: April 2000 |
|
CEN EN 1279-5 |
Glass in building - Insulating glass units - Part 5: Evaluation of conformity |
|
CEN EN 12801 |
Footwear - Test Methods for Insoles, Lining and Insocks - Perspiration Resistance-Includes Amendment A1: 2001 |
|
CEN EN 12830 |
Temperature Recorders for the Transport, Storage and Distribution of Chilled, Frozen, Deep-Frozen/Quick-Frozen Food and Ice Cream - Tests, Performance, Suitability |
|
CEN EN 12856 |
Foodstuffs - Determination of Acesulfame-K, Aspartame and Saccharin - High Preformance Liquid Chomatographic Method |
|
CEN EN 12873-1 |
Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for nonmetallic and non-cementitious factory made products |
|
CEN EN 12875-4 |
Mechanical dishwashing resistance of utensils - Part 4: Rapid test for domestic ceramic articles |
|
CEN EN 12875-5 |
Mechanical dishwashing resistance of utensils - Part 5: Rapid test for ceramic catering articles |
|
CEN EN 1288-5 |
Glass in Building - Determination of the Bending Strength of Glass - Part 5: Coaxial Double Ring Test on Flat Specimens with Small Test Surface Areas |
|
CEN EN 12892 |
Founding - Equipment for the Production of Lost Patterns for the Lost Foam Casting Process |
|
CEN EN 12911 |
Products Used for Treatment of Water Intended for Human Consumption - Manganese Greensand |
|
CEN EN 12912 |
Products used for treatment of water intended for human consumption - Barite |
|
CEN EN 12914 |
Products Used for Treatment of Water Intended for Human Consumption - Powdered Perlite |
|
CEN EN 12943 |
Filler Materials for Thermoplastics - Scope, Designation, Requirements, Tests |
|
CEN EN 12963 |
Adhesives - Determination of Free Monomer Content in Adhesives Based on Synthetic Polymers |
|
CEN EN 12964 |
Adhesives for Leather and Footwear Materials - Lasting Adhesives - Testing Heat Resistance of Bonds at Increasing Temperature |
|
CEN EN 12971-1 |
Reinforcements - Specification for Textile Glass Chopped Strands - Part 1: Designation |
|
CEN EN 12971-2 |
Reinforcements - Specification for Textile Glass Chopped Strands - Part 2: Test Methods and General Requirements |
|
CEN EN 13024-1 |
Glass in Building - Thermally Toughened Borosilicate Safety Glass - Part 1: Definition and Description |
|
CEN EN 13073 |
Footwear - Test Methods for Whole Shoe - Water Resistance |
|
CEN EN 1309-1 |
Round and Sawn Timber - Method of Measurement of Dimensions - Part 1: Sawn Timber |
|
CEN EN 13112 |
Tannery Machines - Splitting and Bandknife Shearing Machines - Safety Requirements |
|
CEN EN 13114 |
Tannery Machines - Rotating Process Vessels - Safety Requirements |
|
CEN EN 13130-1 |
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and the selection of conditions of exposure to food simulants |
|
CEN EN 13130-2 |
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 2: Determination of terephthalic acid in food simulants |
|
CEN EN 1315-2 |
Dimensional Classification - Part 2: Softwood Round Timber |
|
CEN EN 13176 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Ethanol |
|
CEN EN 13189 |
Acetic Acid Food Grade - Product Made from Materials of Non-Agricultural Origin - Definitions, Requirements, Marking |
|
CEN EN 13228 |
Wood flooring - Solid wood overlay flooring elements including blocks with an interlocking system-Incorporating corrigendum June 2007 |
|
CEN EN 13234 |
Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Evaluation of the resistance to crack propagation by notch sensitivity testing-Supersedes ENV 13234:1998 |
|
CEN EN 1328 |
Cement Bonded Particleboards - Determination of Frost Resistance |
|
CEN EN 13304 |
Bitumen and bituminous binders - Framework for specification of oxidised bitumens |
|
CEN EN 13320 |
Surface Active Agents - Gas Chromatographic Trace Determination of Free Ethylene Oxide in Ethoxylates |
|
CEN EN 13329 |
Laminate Floor Coverings - Specifications, Requirements and Test Methods |
|
CEN EN 13362 |
Geosynthetic Barriers - Characteristics required for use in the construction of canals |
|
CEN EN 13402-3 |
Size designation of clothes - Part 3: Measurements and intervals |
|
CEN EN 13405 |
Surface active agents Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatography (HPLC) |
|
CEN EN 13417-3 |
Reinforcement - Specifications for Woven Fabrics - Part 3: Specific Requirements |
|
CEN EN 13435 |
Surface Active Agents - Determination of Free Amine Content of Alkyl Dimethyl Betaines |
|
CEN EN 1346 |
Adhesives for tiles - Determination of open time |
|
CEN EN 1347 |
Adhesives for tiles - Determination of wetting capability |
|
CEN EN 13473-3 |
Reinforcement - Specifications for Multi-Axial Multi-Ply Fabrics - Part 3: Specific Requirements |
|
CEN EN 13486 |
Temperature Recorders and Thermometers for the Transport, Storage and Distribution of Chilled, Frozen, Deep-Frozen/Quick-Frozen Food and Ice Cream - Periodic Verification |
|
CEN EN 13515 |
Footwear - Test Methods for Uppers and Lining - Water Vapour Permeability and Absorption |
|
CEN EN 13517 |
Footwear - Test Methods for Uppers, Lining and Insocks - Colour Migration |
|
CEN EN 13540 |
Leather Physical and mechanical tests Determination of heat resistance of patent leather |
|
CEN EN 13543 |
Manufactured Articles Filled with Feather and down - Measurement of Water Absorption of Filling Material |
|
CEN EN 13562 |
Geotextiles and Geotextile-Related Products - Determination of Resistance to Penetration by Water (Hydrostatic Pressure Test) |
|
CEN EN 13610 |
Chemical disinfectants - Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and industrial areas - Test method and requirements (phase 2, step 1) |
|
CEN EN 13617-3 |
Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
|
CEN EN 13617-4 |
Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
|
CEN EN 13630-10 |
Explosives for civil uses Detonating cords and safety fuses Part 10: Determination of initiating capability of detonating cords |
|
CEN EN 13630-11 |
Explosives for civil uses Detonating cords and safety fuses Part 11: Determination of velocity of detonation of detonating cords |
|
CEN EN 13630-2 |
Explosives for civil uses - Detonating cords and safety fuses - Part 2: Determination of thermal stability of detonating cords and safety fuses |
|
CEN EN 13631-5 |
Explosives for civil uses - High explosives - Part 5: Determination of resistance to water |
|
CEN EN 13716 |
Surface Active Agents - Determination of Total Base Nitrogen - Potentiometric Titration |
|
CEN EN 13738 |
Geotextiles and geotextile-related products - Determination of pullout resistance in soil |
|
CEN EN 13763-2 |
Explosives for civil uses Detonators and relays Part 2: Determination of thermal stability |
|
CEN EN 13763-23 |
Explosives for civil uses Detonators and relays Part 23: Determination of the shock-wave velocity of shock tube |
|
CEN EN 1377 |
Foodstuffs - Determination of Acesulfame K in Table Top Sweetner Preparations - Spectrometric Method |
|
CEN EN 13787 |
Elastomers for Gas Pressure Regulators and Associated Safety Devices for Inlet Pressures Up to 100 Bar |
|
CEN EN 13792 |
Colour coding of taps and valves for use in laboratories |
|
CEN EN 13806 |
Foodstuffs - Determination of trace elements - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after pressure digestion |
|
CEN EN 1381 |
Timber Structures - Test Methods - Load Bearing Stapled Joints |
|
CEN EN 13844 |
Textiles - Monofilaments - Determination of thermal shrinkage |
|
CEN EN 13879 |
Wood-Based Panels - Determination of Edgewise Bending Properties |
|
CEN EN 1388-2 |
Materials and articles in contact with foodstuffs Silicate surfaces Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware |
|
CEN EN 1390 |
Wood preservatives - Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae - Laboratory method-: 1994 |
|
CEN EN 1391 |
Adhesives for Leather and Footwear Materials - A Method for Evaluating the Bondability of Materials - Minimum Requirements and Material Classification |
|
CEN EN 1392 |
Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions |
|
CEN EN 13920-6 |
Aluminium and aluminium alloys Scrap Part 6: Scrap consisting of two or more wrought alloys |
|
CEN EN 13951 |
Liquid pumps - Safety requirements - Agrifoodstuffs equipment ; Design rules to ensure hygiene in use |
|
CEN EN 13996 |
Surface active agents - Foaming power and antifoaming power - Turbine stirring method |
|
CEN EN 14020-1 |
Reinforcements Specification for textile glass rovings Part 1: Designation |
|
CEN EN 1402-4 |
Unshaped refractory products Part 4: Determination of consistency of castables-Superseded by ENV 1402-4: 1999 |
|
CEN EN 1402-6 |
Unshaped refractory products Part 6: Measurement of physical properties-Supersedes ENV 1402-6: 1998 |
|
CEN EN 1402-7 |
Unshaped refractory materials - Part 7: Tests on pre-formed shapes-Supersedes ENV 1402-7:1998 |
|
CEN EN 14035-12 |
Fireworks - Part 12: Flash Bangers and Flash Banger Batteries - Specification and Test Methods |
|
CEN EN 14035-27 |
Fireworks Part 27: Rockets Specification and test methods |
|
CEN EN 14035-34 |
Fireworks Part 34: Table bombs - Specification and test methods |
|
CEN EN 1408 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Poly(Diallyldimethylammonium Chloride) |
|
CEN EN 14081-3 |
Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control-Supersedes EN 518: 1995 and EN 519: 1995 |
|
CEN EN 14115 |
Textiles - Burning of Materials for Maquees, Large Tents and Related Products - Ease of Ignition |
|
CEN EN 14118-3 |
Reinforcement Specifications for textile glass mats (chopped strand and continuous filament mats) Part 3: Specific requirements |
|
CEN EN 14122 |
Foodstuffs Determination of vitamin B1 by HPLC-Incorporating Corrigendum December 2005 |
|
CEN EN 14156 |
Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods |
|
CEN EN 14175-4 |
Fume cupboards - Part 4: On-site test methods |
|
CEN EN 14176 |
Foodstuffs Determination of domoic acid in mussels by HPLC |
|
CEN EN 14195 |
Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods-Incorporating Corrigendum June 2006 |
|
CEN EN 14196 |
Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers |
|
CEN EN 14220 |
Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications |
|
CEN EN 14233 |
Materials and articles in contact with foodstuffs - Plastics - Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for migration testing |
|
CEN EN 14293 |
Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements |
|
CEN EN 14321-1 |
Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description |
|
CEN EN 14352 |
Foodstuffs - Determination of fumonisin B1 and B2 in maize based foods - HPLC method with immunoaffinity column clean up |
|
CEN EN 14354 |
Wood-based panels Wood veneer floor covering |
|
CEN EN 14465 |
Textiles - Upholstery fabrics - Specification and methods of test-Incorporates Amendment A1: 06/2006 |
|
CEN EN 14469-1 |
Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures |
|
CEN EN 14481 |
Materials and articles in contact with foodstuffs Plastics Test methods for the determination of fatty contact |
|
CEN EN 14499 |
Textile floor coverings - Minimum requirements for carpet underlays |
|
CEN EN 14598-1 |
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation |
|
CEN EN 14627 |
Foodstuffs - Determination of trace elements - Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion |
|
CEN EN 14678-2 |
LPG equipment and accessories - Equipment for Liquefied Petroleum Gas automotive filling stations - Part 2: Components other than dispensers, and installation requirements |
|
CEN EN 1470 |
Textile Floor Coverings - Classification of Needled Floor Coverings Except for Needled Pile Floor Coverings |
|
CEN EN 14712 |
Surface active agents - Determination of physical stability in alkaline and acid solutions |
|
CEN EN 14782 |
Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
|
CEN EN 14936-1 |
Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method |
|
CEN EN 14937-1 |
Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method |
|
CEN EN 14944-3 |
Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementititous products |
|
CEN EN 14958 |
Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements |
|
CEN EN 14976 |
Textiles - Mattress ticking - Specifications and test methods |
|
CEN EN 15114 |
Textile floor coverings - Classification of textile floor coverings without pile-Incorporating corrigendum October 2007 |
|
CEN EN 15146 |
Solid softwood panelling and cladding - Machined profiles without tongue and groove |
|
CEN EN 15154-1 |
Emergency safety showers - Part 1: Plumbed-in body showers for laboratories |
|
CEN EN 15159-1 |
Vitreous and porcelain enamels - Glass lined apparatus process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories |
|
CEN EN 15168 |
Surface active agents - Determination of hydroxyl value - p- Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide |
|
CEN EN 1528-2 |
Fatty Food - Determination of Pesticides and Polychlorinated Biphenyls (PCBs) - Part 2: Extraction of Fat, Pesticides and PCBs, and Determination of Fat Content |
|
CEN EN 1528-4 |
Fatty Food - Determination of Pesticides and Polychlorinated Biphenyls (PCBs) - Part 4: Determination, Confirmatory Tests, Miscellaneous |
|
CEN EN 15337 |
Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens |
|
CEN EN 15343 |
Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
|
CEN EN 15345 |
Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
|
CEN EN 15426 |
Candles - Specification for sooting behaviour |
|
CEN EN 15434 |
Glass in building - Product standard for structural and/or ultraviolet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
|
CEN EN 15494 |
Candles - Product safety labels |
|
CEN EN 15519 |
Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract |
|
CEN EN 1595 |
Pressure Equipment Made from Borosilicate Glass 3.3 - General Rules for Design, Manufacture and Testing |
|
CEN EN 1654 |
Copper and copper alloys Strip for springs and connectors-Incorporating corrigendum July 2002 |
|
CEN EN 1673 |
Food Processing Machinery - Rotary Rack Ovens - Safety and Hygiene Requirements |
|
CEN EN 1761 |
Rubber Hoses and Hose Assemblies for Fuel Truck Delivery - Specification |
|
CEN EN 1765 |
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
|
CEN EN 1772 |
Surface Active Agents - Determination of Wetting Power by Immersion-ISO 8022:1990 Modified |
|
CEN EN 1778 |
Characteristic Values for Welded Thermoplastics Constructions - Determination of Allowable Stresses and Moduli for Design of Thermoplastics Equipment |
|
CEN EN 1841 |
Adhesives - Test Methods for Adhesives for Floor Coverings and Wall Coverings - Determination of Dimensional Changes of a Linoleum Floor Covering in Contact with an Adhesive |
|
CEN EN 1842 |
Plastics - Thermoset Moulding Compounds (SMC - BMC) - Determination of Compression Moulding Shrinkage |
|
CEN EN 1870-12 |
Safety of woodworking machines Circular sawing machines Part 12: Pendulum cross-cut sawing machines |
|
CEN EN 1870-5 |
Safety of Woodworking Machines - Circular Sawing Machines - Part 5: Circular Sawbenches/Up-Cutting Cross-Cut Sawing Machines |
|
CEN EN 1870-6 |
Safety of Woodworking Machines - Circular Sawing Machines - Part 6: Circular Sawing Machines for Firewood and Dual Purpose Circular Sawing Machines for Firewood/Circular Saw Benches, with Manual Loading and/or Unloading |
|
CEN EN 1883 |
Feather and Down - Sampling in View of Tests |
|
CEN EN 1892 |
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties-Supersedes ENV 1892:1996 |
|
CEN EN 1918-3 |
Gas Supply Systems - Underground Gas Storage - Part 3: Functional Recommendations for Storage in Solution-Mined Salt Cavities |
|
CEN EN 1918-5 |
Gas Supply Systems - Underground Gas Storage - Part 5: Functional Recommendations for Surface Facilities |
|
CEN EN 1940 |
Self Adhesive Tapes - Measurement of Breaking Strength |
|
CEN EN 1942 |
Self Adhesive Tapes - Measurement of Thickness |
|
CEN EN 1965-2 |
Structural Adhesives - Corrosion - Part 2: Determination and Classification of Corrosion to a Brass Substrate-Supersedes ENV 1965-2:1995 |
|
CEN EN 1966 |
Structural adhesives Characterisation of a surface by measuring adhesion by means of the three point bending method-Supersedes ENV 1966: 1995 |
|
CEN EN 1976 |
Copper and Copper Alloys - Cast Unwrought Copper Products |
|
CEN EN 1981 |
Copper and copper alloys - Master alloys |
|
CEN EN 1989 |
Thermoplastics Piping Systems - Joints for Buried Non-Pressure Sewerage Applications - Test Method for Long-Term Sealing Performance of Joints with Thermoplastic Elastomer (TPE) Seals by Estimating the Sealing Pressure |
|
CEN EN 20105-A02 |
Textiles - Tests for Colour Fastness - Part A02: Grey Scale for Assessing Change in Colour |
|
CEN EN 20105-C03 |
Textiles - Tests for Colour Fastness Part C03 : Colour Fastness to Washing: Test 3 |
|
CEN EN 20105-N01 |
Textiles - Tests for Colour Fastness - Part N01: Colour Fastness to Bleaching: Hypochlorite (ISO 105-N01 : 1993) |
|
CEN EN 20-2 |
Wood Preservatives - Determination of the Protective Effectiveness Against Lyctus Brunneus (Stephens) - Part 2: Application by Impregnation (Laboratory Method) |
|
CEN EN 21 |
Wood Preservatives; Determination of the Toxic Values Against Anobium Punctatum (De Geer) by Larval Transfer (Laboratory Method) |
|
CEN EN 212 |
Wood preservatives General guidance on sampling and preparation for analysis of wood preservatives and treated timber |
|
CEN EN 23312 |
Sintered Metal Materials and Hardmetals - Determination of Young Modulus (ISO 3312: 1987) |
|
CEN EN 24829-1 |
Steel and Cast Iron - Determination of Total Silicon Content - Reduced Molyoldosilicate Spectrophotometric Method - Part 1: Silicon Content Between 0-05 and 1 |
|
CEN EN 24937 |
Steel and Iron - Determination of Chromium Content - Potentiometric or Visual Method |
|
CEN EN 24938 |
Steel and Iron - Determination of Nickel Content - Gravimetric or Titrimetric Method |
|
CEN EN 27627-6 |
Hardmetals - Chemical Analysis by Flame Atomic Absorption Spectrometry - Part 6: Determination of Chromium in Contents from 0,01 to 2 % (m/m) (ISO 7627-6: 1985) |
|
CEN EN 28050 |
Information Processing - Reels for 12,7 mm (0,5 in) Wide Magnetic Tapes - Sizes 16, 18 and 22 (ISO 8064 : 1985) |
|
CEN EN 29073-1 |
Textiles - Test Methods for Nonwoven - Part 1: Determination of Mass Per Unit Area |
|
CEN EN 311 |
Wood-Based Panels - Surface Soundness - Test Method |
|
CEN EN 335-2 |
Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
|
CEN EN 336 |
Structural timber - Sizes, permitted deviations |
|
CEN EN 390 |
Glued Laminated Timber - Sizes - Permissible Deviations |
|
CEN EN 391 |
Glued Laminated Timber - Delamination Test of Glue Lines |
|
CEN EN 4002 |
Aerospace series - Aluminium alloy AL-P2219-T81 - Sheet and strip 0,5 mm less than or equal to a less than or equal to 6 mm |
|
CEN EN 410 |
Glass in Building - Determination of Luminous and Solar Characteristics of Glazing |
|
CEN EN 438-2 |
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called Laminates) - Part 2: Determination of properties |
|
CEN EN 460 |
Durability of Wood and Wood-Based Products - Natural Durability of Solid Wood - Guide to the Durability Requirements for Wood to be Used in Hazard Classes |
|
CEN EN 479 |
Unplasticized Polyvinylchloride (PVC-U) Profiles for the Fabrication of Windows and Doors - Determination of Heat Reversion |
|
CEN EN 487 |
Aluminium and Aluminium Alloys - Rolling Ingots - Specifications |
|
CEN EN 573-5 |
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
|
CEN EN 586-1 |
Aluminium and Aluminium Alloys - Forgings - Part 1: Technical Conditions for Inspection and Delivery |
|
CEN EN 59 |
Glass Reinforced Plastics: Measurement of Hardness by Means of a Barcol Impressor |
|
CEN EN 611-1 |
Tin and Tin Alloys - Pewter and Pewterware - Part 1: Pewter |
|
CEN EN 611-2 |
Tin and Tin Alloys - Pewter and Pewterware - Part 2: Pewterware |
|
CEN EN 623-2 |
Advanced Technical Ceramics - Monolithic Ceramics - General and Textural Properties - Part 2: Determination of Density and Porosity |
|
CEN EN 631-1 |
Materials and Articles in Contact with Foodstuffs - Catering Containers - Part 1: Dimensions of Containers |
|
CEN EN 631-2 |
Materials and Articles in Contact with Foodstuffs - Catering Containers - Part 2: Dimensions of Accessories and Supports |
|
CEN EN 633 |
Cement-Bonded Particleboards - Definition and Classification |
|
CEN EN 658-5 |
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)-Supersedes ENV 658-5:1993 |
|
CEN EN 673 |
Glass in building - Determination of thermal transmittance (U value) - Calculation method-Includes Amendment A1:2000 and A2:2002 |
|
CEN EN 720-2 |
Transportable Gas Cylinders - Gases and Gas Mixtures - Part 2: Determination of Flammability and Oxidizing Ability of Gases and Gas Mixtures |
|
CEN EN 725-11 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 11: Determination of densification on natural sintering-:1993 |
|
CEN EN 725-4 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis-:1994 |
|
CEN EN 725-9 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density |
|
CEN EN 754-2 |
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 2: Mechanical Properties |
|
CEN EN 754-4 |
Aluminium and Aluminium Alloys - Cold Drawn Rod/ Bar and Tube - Part 4: Square Bars, Tolerances on Dimensions and Form |
|
CEN EN 754-5 |
Aluminium and Aluminium Alloys - Cold Drawn Rod/ Bar and Tube - Part 5: Rectangular Bars, Tolerances on Dimensions and Form |
|
CEN EN 754-6 |
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 6: Hexagonal Bars, Tolerances on Dimensions and Form |
|
CEN EN 754-7 |
Aluminium and Aluminium Alloys - Cold Drawn Rod/Bar and Tube - Part 7: Seamless Tubes, Tolerances on Dimensions and Form |
|
CEN EN 821-1 |
Advanced Technical Ceramics - Monolithic Ceramics - Thermo-Physical Properties - Part 1: Determination of Thermal Expansion |
|
CEN EN 844-1 |
Round and Sawn Timber - Terminology - Part 1: General Terms Common to Round Timber and Sawn Timber |
|
CEN EN 844-5 |
Round and Sawn Timber - Terminology - Part 5: Terms Relating to Dimensions of Round Timber |
|
CEN EN 847-3 |
Tools for woodworking - Safety requirements - Part 3: Clamping devices |
|
CEN EN 891 |
Chemicals used for treatment of water intended for human consumption - Iron (III) chloride sulfate |
|
CEN EN 900 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Calicum Hypochlorite |
|
CEN EN 902 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Hydrogen Peroxide |
|
CEN EN 920 |
Paper and Board Intended to Come into Contact with Foodstuffs - Determination of Dry matter Content in an Aqueous Extract |
|
CEN EN 924 |
Adhesives - Solvent-Borne and Solvent-Free Adhesives - Determination of Flashpoint |
|
CEN EN 938 |
Chemicals Used for Treatment of Water Intended for Human Consumption - Sodium Chlorite |
|
CEN EN 941 |
Aluminium and Aluminium Alloys - Circle and Circle Stock for General Applications - Specifications |
|
CEN EN 975-1:1995/A1 |
AMD A1 Sawn Timber - Appearance Grading of Hardwoods - Part 1: Oak and Beech |
|
CEN EN 986:1995/AC |
Textile Floor Coverings - Tiles - Determination of Dimensional Changes Due to the Effects of Varied Water and Heat Conditions and Distortion out of Plane-Ratified European Text |
|
CEN EN 993-11 |
Methods of test for dense shaped refractory products - Part 11: Determination of resistance to thermal shock |
|
CEN EN 995 |
Textile Floor Coverings - Assessment of the Creep of the Backings |
|
CEN EN ISO 10101-3 |
Natural Gas - Determination of Water by the Karl Fischer Method - Part 3: Coulometric Procedure-ISO 10101-3: 1993 |
|
CEN EN ISO 10319 |
Geotextiles - Wide-Width Tensile Test (ISO 10319 : 1993) |
|
CEN EN ISO 10320 |
Geotextiles and Geotextile-Related Products - Identification on Site-SUPERSEDES EN 30320:1993; ISO 10320:1999 |
|
CEN EN ISO 10352 |
Fibre-Reinforced Plastics - Moulding Compounds and Prepregs - Determination of Mass per Unit Area-ISO 10352: 1997 |
|
CEN EN ISO 10363 |
Hot-Melt Adhesives - Determination of Thermal Stability (ISO 10363 : 1992) |
|
CEN EN ISO 10365 |
Adhesives - Designation of Main Failure Patterns (ISO 10365 : 1992) |
|
CEN EN ISO 10366-1 |
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications-ISO 10366-1: 2002 |
|
CEN EN ISO 10427-1 |
Petroleum and Natural Gas Industries - Casing Centralizers - Part 1: Bow-Spring Casing Centralizers-ISO 10427-1:2001 |
|
CEN EN ISO 10427-2 |
Petroleum and natural gas industries - Equipment for well cementing - Part 2: Centralizer placement and stop-collar testing-ISO 10427-2:2004 |
|
CEN EN ISO 10440-1 |
Petroleum, petrochemical and natural gas industries - Rotarytype positive-displacement compressors - Part 1: Process compressors |
|
CEN EN ISO 10440-2 |
Petroleum and Natural Gas Industries - Rotary-Type Positive-Displacement Compressors - Part 2: Packaged Air Compressors (Oil-Free)-ISO 10440-2:2001; Corrected 2002-09-25 |
|
CEN EN ISO 105- E04 |
Textiles - Tests for Colour Fastness - Part E04: Colour Fastness to Perspiration (ISO 105-E04 : 1994) |
|
CEN EN ISO 105- N02 |
Textiles - Tests for Colour Fastness Part N02: Colour Fastness to Bleaching - Peroxide (ISO 105-N02:1993) |
|
CEN EN ISO 105- N03 |
Textiles - Tests for Colour Fastness - Part N03: Colour Fastness to Bleaching - Sodium Chlorite (Mild) (ISO 105-N03:1993) |
|
CEN EN ISO 105- N05 |
Textiles - Test for Colour Fastness - Part N05: Colour Fastness to Stoving (ISO 105-N05:1993) |
|
CEN EN ISO 1052 |
Durum wheat flour and semolina - Determination of yellow pigment content-ISO 11052:1994 |
|
CEN EN ISO 10539 |
Animal and Vegetable Fats and Oils - Determination of Alkalinity-ISO 10539: 2002 |
|
CEN EN ISO 10565 |
Oilseeds - Simultaneous Determination of Oil and Water Contents - Method Using Pulsed Nuclear Magnetic Resonance Spectrometry-ISO 10565:1998 |
|
CEN EN ISO 105-A01 |
Textiles - Tests for Colour Fastness - Part A01: General Principles of Testing-Incorporating Amendment N0. 1; ISO 105-A01: 1994; Supersedes EN 28798: 1991 |
|
CEN EN ISO 105-B08 |
Textiles - Tests for Colour Fastness - Part B08: Quality Control of Blue Wool Reference materials 1 to 7-ISO 105-B08:1995 |
|
CEN EN ISO 105-E08 |
Textiles Tests for Colour Fastness Part E08: Colour Fastness to Hot Water-ISO 105-E08 : 1994 |
|
CEN EN ISO 105-E10 |
Textiles - Tests for Colour Fastness Part E10: Colour Fastness to Decatizing-ISO 105-E10 : 1994 |
|
CEN EN ISO 105-G01 |
Textiles - Tests for Colour Fastness - Part G01: Colour Fastness to Nitrogen Oxides (ISO 105-G01 : 1993) |
|
CEN EN ISO 105-J03 |
Textiles - Tests for Colour Fastness - Part J03: Calculation of Colour Differences-ISO 105-J03: 1995, Including Technical Corrigendum 1: 1996 |
|
CEN EN ISO 105-S03 |
Textiles - Tests for Colour Fastness - Part S03: Colour Fastness to Vulcanization: Open Steam (ISO 105-S03 : 1993) |
|
CEN EN ISO 105-X13 |
Textiles - Tests for Colour Fastness - Part X13: Colour Fastness of Wool Dyes to Processes Using Chemical Means for Creasing, Pleating and Setting-ISO 105-X13: 1994 |
|
CEN EN ISO 105-Z04 |
Textiles - Tests for Colour Fastness - Part Z04: Dispersibility of Disperse Dyes-ISO 105-Z04: 1995 |
|
CEN EN ISO 105-Z08 |
Textiles - Tests for Colour Fastness - Part Z08: Determination of Solubility and Solution Stability of Reactive Dyes in the Presence of Electrolytes-ISO 105-Z08: 1995 |
|
CEN EN ISO 105-Z11 |
Textiles - Tests for Colour Fastness - Part Z11: Evaluation of Speckiness of Colorant Dispersions-ISO 105-Z11:1998 |
|
CEN EN ISO 1060-2 |
Plastics - Homopolymer and Copolymer Resins of Vinyl Chloride - Part 2: Preparation of Test Samples and Determination of Properties-ISO 1060-2:1998 |
|
CEN EN ISO 11052 |
Durum wheat flour and semolina - Determination of yellow pigment content-ISO 11052:1994 |
|
CEN EN ISO 11111-5 |
Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting-ISO 11111-5:2005; Supersedes EN ISO 11111:1995 |
|
CEN EN ISO 11111-7 |
Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery-ISO 11111-7:2005; Supersedes EN ISO 11111:1995 |
|
CEN EN ISO 11130 |
Corrosion of Metals and Alloys - Alternate Immersion Test in Salt Solution-ISO 11130:1999 |
|
CEN EN ISO 11215 |
Modified Starch - Determination of Adipic Acid Content of Acetylated Di-Starch Adipates - Gas-Chromatographic Method-Incorporates Corrigendum October 1998; ISO 11215:1998 |
|
CEN EN ISO 11468 |
Plastics - Preparation of PVC Pastes for Test Purposes - Dissolver Method-ISO 11468: 1997 |
|
CEN EN ISO 11502 |
Plastics - Film and sheeting - Determination of blocking resistance-ISO 11502:1995 |
|
CEN EN ISO 1163-1 |
Plastics - Unplasticized Poly(Vinyl Chloride) (PVC-U) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications-ISO 1163-1:1995 |
|
CEN EN ISO 11721-2 |
Textiles - Determination of the resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish-ISO 11721:2003 |
|
CEN EN ISO 12058-1 |
Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method-Supersedes EN ISO 9371:1995; ISO 12058-1:1997 |
|
CEN EN ISO 12115 |
Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Flowability, Maturation and Shelf Life-ISO 12115: 1997 |
|
CEN EN ISO 12228 |
Animal and Vegetable Fats and Oils - Determination of Individual and Total Sterols Contents - Gas Chromatographic Method-ISO 12228:1999 |
|
CEN EN ISO 12625-3 |
Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density-Supersedes EN 12625-3:1999; ISO 12625-3:2005 |
|
CEN EN ISO 12625-6 |
Tissue paper and tissue products - Part 6: Determination of grammage-ISO 12625-6:2005 |
|
CEN EN ISO 12676 |
Refractory products - Determination of resistance to carbon monoxide-ISO 12676:2000 |
|
CEN EN ISO 12945-2 |
Textiles - Determination of Fabric Propensity to Surface Fuzzing and to Pilling - Part 2: Modified Martindale Method-ISO 12945-2:2000 |
|
CEN EN ISO 12957-2 |
Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test-ISO 12957-2:2005 |
|
CEN EN ISO 13443 |
Natural Gas - Standard Reference Conditions-ISO 13443:1996 including Corrigendum 1:1997 |
|
CEN EN ISO 13445 |
Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method-ISO 13445:2003 |
|
CEN EN ISO 13503-4 |
Petroleum and natural gas industries Completion fluids and materials Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions-ISO 13503-4:2006 |
|
CEN EN ISO 13534 |
Food processing machinery - Curing injection machines - Safety and hygiene requirements |
|
CEN EN ISO 13927 |
Plastics - Simple heat release test using a conical radiant heater and a thermopile detector-ISO 13927:2001 |
|
CEN EN ISO 14130 |
Fibre-reinforced plastic composites Determination of apparent interlaminar shear strength by short-beam method-ISO 14130:1997 |
|
CEN EN ISO 14182 |
Animal Feeding Stuffs - Determination of Residues of Organophosphorus Pesticides - Gas Chromatographic Method-ISO 14182:1999 |
|
CEN EN ISO 1421 |
Rubber- or Plastics-Coated Fabrics - Determination of Tensile Strength and Elongation at Break-ISO 1421:1998 |
|
CEN EN ISO 14268 |
Leather - Physical and mechanical tests - Determination of water vapour permeability-ISO 14268:2002 |
|
CEN EN ISO 14419 |
Textiles - Oil Repellency - Hydrocarbon Resistance Test-ISO 14419: 1998 |
|
CEN EN ISO 14438 |
Glass in Building - Determination of Energy Balance Value - Calculation Method-ISO 14438: 2002 |
|
CEN EN ISO 14528-1 |
Plastics - Melamine-Formaldehyde Powder Moulding Compounds (MF-PMCs) - Part 1: Designation System and Basis for Specifications-ISO 14528-1:1999 |
|
CEN EN ISO 14529-3 |
Plastics - Melamine/Phenolic Powder Moulding Compounds (MP-PMCs) - Part 3: Requirements for Selected Moulding Compounds-ISO 14529-3: 1999 |