|
CEN EN 13940-1 |
Health informatics - System of concepts to support continuity of care - Part 1: Basic concepts |
|
CEN EN 15430-1 |
Winter and road service area maintenance equipments - Data acquisition and transmission - Part 1: In vehicle data acquisition |
|
CENELEC EN 50065-2-2 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments-Incorporating Corrigenda August 2003 and October 2006; Amd 1: September 2005 |
|
CENELEC EN 50065-4-1 |
Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 148,5 kHz Part 4-1: Low Voltage Decoupling Filters - Generic Specification-Ratified European Text:01/08/2001 |
|
CENELEC EN 50065-4-2 |
Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz Part 4-2: Low voltage decoupling filters - Safety requirements-Includes Amendments A1:2003 and A2:2005 |
|
CENELEC EN 50065-7 |
Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 148,5 kHz - Part 7: Equipment Impedance |
|
CENELEC EN 50117-2-1 |
Coaxial cables Part 2-1: Sectional specification for cables used in cabled distribution networks Indoor drop cables for systems operating at 5 MHz – 1 000 MHz |
|
CENELEC EN 50117-4 |
Coaxial Cables Used in Cabled Distribution Networks Part 4: Sectional Specification for Distribution and Trunk Cables |
|
CENELEC EN 50170/A3 |
AMD 3 General Purpose Field Communication System-Ratified European Text; Partially superseded by EN 61784-1:2004; Partially superseded by EN 61158-2:2004; Partially superseded by EN 61158-3:2004; Partially superseded by EN 61158-5:2004; Partially superseded by EN 61158-4:2004; Partially superseded by EN 61158-6:2004 |
|
CENELEC EN 50173-2 |
Information technology - Generic cabling systems - Part 2: Office premises |
|
CENELEC EN 50173-5 |
Information technology - Generic cabling systems - Part 5: Data centres |
|
CENELEC EN 50256 |
Characteristics of DVB Receivers |
|
CENELEC EN 50288-5-2 |
Multi-element metallic cables used in analogue and digital communication and control Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables |
|
CENELEC EN 50288-6-2 |
Multi-element metallic cables used in analogue and digital communication and control Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz Work area and patch cord cables |
|
CENELEC EN 50289-1-10 |
Communication Cables - Specifications for Test Methods - Part 1-10: Electrical Test Methods - Crosstalk |
|
CENELEC EN 50289-1-2 |
Communication Cables - Specifications for Test Methods Part 1-2: Electrical Test Methods - DC Resistance |
|
CENELEC EN 50289-1-3 |
Communication Cables - Specifications for Test Methods Part 1-3: Electrical Test Methods - Dielectric Strength |
|
CENELEC EN 50289-1-4 |
Communication Cables - Specifications for Test Methods Part 1-4: Electrical Test Methods - Insulation Resistance |
|
CENELEC EN 50289-3-12 |
Communication Cables - Specifications for Test Methods - Part 3-12: Mechanical Test Methods - Shot Gun Damage |
|
CENELEC EN 50289-3-2 |
Communication Cables - Specifications for Test Methods Part 3-2: Mechanical Test Methods - Tensile Strength and Elongation for Conductor |
|
CENELEC EN 50289-3-9 |
Communication Cables - Specifications for Test Methods Part 3-9: Mechanical Test Methods - Bending Tests |
|
CENELEC EN 50289-4-1 |
Communication Cables - Specifications for Test Methods Part 4-1: Environmental Test Methods - General Requirements |
|
CENELEC EN 50289-4-2 |
Communication Cables - Specifications for Test Methods Part 4-2: Environmental Test Methods - Water Penetration |
|
CENELEC EN 50289-4-9 |
Communication Cables - Specifications for Test Methods Part 4-9: Environmental Test Methods - Pneumatic Resistance |
|
CENELEC EN 50290-2-23 |
Communication Cables - Part 2-23: Common Design Rules and Construction - PE Insulation-:1994 |
|
CENELEC EN 50290-2-27 |
Communication cables - Part 2-27: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds-Incorporating Amendment A1: June 2007 |
|
CENELEC EN 50290-2-28 |
Communication Cables Part 2-28: Common Design Rules and Construction - Filling Compounds for Filled Cables-Supersedes HD 624.8 S1:1995 + A1:1998 |
|
CENELEC EN 50320 |
Digital Audio Broadcasting System - Specification of the DAB Command Set for Receivers (DCSR) |
|
CENELEC EN 50377-8-3 |
Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-3: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C |
|
CENELEC EN 50377-8-4 |
Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-4: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U |
|
CENELEC EN 50377-8-5 |
Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-5: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U |
|
CENELEC EN 50377-8-6 |
Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-6: LSH-HR simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category C |
|
CENELEC EN 50378-3-1 |
Passive components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type: 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre |
|
CENELEC EN 50411-2-4 |
Fibre organisers and closures to be used in optical fibre communication systems – Product specifications Part 2-4: Sealed dome fibre splice closures Type 1, for category S & A |
|
CENELEC EN 50441-1 |
Cables for indoor residential telecommunication installations Part 1: Unscreened cables - Grade 1 |
|
CENELEC EN 50441-2 |
Cables for indoor residential telecommunication installations Part 2: Screened cables - Grade 2 |
|
CENELEC EN 50494 |
Satellite signal distribution over a single coaxial cable in single dwelling installations |
|
CENELEC EN 60094-2 |
Magnetic Tape Sound Recording and Reproducing Systems Part 2: Calibration Tapes (IEC 94-2 : 1994) |
|
CENELEC EN 60107-5 |
Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions Part 5: Electrical Measurements on Multichannel Sound Television Receivers Using the NICAM Two-Channel Digital Sound-System-Includes Amendment A1: 1999; IEC 60107-5: 1992 + A1: 1999 |
|
CENELEC EN 60107-8 |
Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions Part 8: Measurement on D2-MAC/Packet Equipment-IEC 60107-8:1997 |
|
CENELEC EN 60169-23 |
Radio-Frequency Connectors Part 23: Pin and Socket Connector for Use with 3,5 mm Rigid Precision Coaxial Lines with Inner Diameter of Outer Conductor 3,5 mm (0,1378 in) (IEC 169-23 : 1991) |
|
CENELEC EN 60244-15 |
Methods of Measurement for Radio Transmitters - Part 15: Amplitude-Modulated Transmitters for Sound Broadcasting-IEC 60244-15:1999 |
|
CENELEC EN 60268-16 |
Sound System Equipment - Part 16: Objective Rating of Speech Intelligibility by Speech Transmission Index-IEC 60268-16:2003 |
|
CENELEC EN 60679-5-1 |
Quartz Crystal Controlled Oscillators of Assessed Quality Part 5-1: Blank Detail Specification - Qualification Approval-IEC 60679-5-1:1998 |
|
CENELEC EN 60774-1 |
Helical-Scan Video Tape Cassette System Using 12.65 mm (0.5 in) Magnetic Tape on Type VHS Part 1. VHS and Compact VHS Video Cassette System-(IEC 774-1 : 1994) |
|
CENELEC EN 60793-1-21 |
Optical Fibres - Part 1-21: Measurement Methods and Test Procedures - Coating Geometry-IEC 60793-1-21:2001 |
|
CENELEC EN 60793-1-42 |
Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion |
|
CENELEC EN 60793-1-45 |
Optical fibres Part 1-45: Measurement methods and test procedures Mode field diameter (IEC 60793-1-45:2001 + corrigendum 2002, modified)-Partly Supersedes BS EN 188000:1992; Incorporates Corrigendum April 2004 |
|
CENELEC EN 60793-1-51 |
Optical Fibres - Part 1-51: Measurement Methods and Test Procedures - Dry Heat-IEC 60793-1-51:2001 |
|
CENELEC EN 60793-2-20 |
Optical Fibres Part 2-20: Product Specifications - Sectional Specification for Category A2 Multimode Fibres-IEC 60793-2-20: 2001 |
|
CENELEC EN 60794-3-10 |
Optical fibre cables Part 3-10: Outdoor cables - Family specification for duct and directly buried optical telecommunication cables-IEC 60794-3-10: 2002, Modified; Supersedes EN 187101: 1995 |
|
CENELEC EN 60794-3-30 |
Optical fibre cables Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lake and river crossings-IEC 60794-3-30: 2002 |
|
CENELEC EN 60835-2-1 |
Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on Terrestrial Radio- Relay Systems Section 2.1: General (IEC 835-2-1 : 1990) |
|
CENELEC EN 60835-2-8 |
Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on Terrestrial Radio-Relay Systems Section 8: Adaptive Equalizer-Includes Amendment A1: 1996; IEC 835-2-8: 1993 + A1: 1996 |
|
CENELEC EN 60835-3-10 |
Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on Satellite Earth Stations Section 10: Terminal Equipment - TDMA Traffic Earth Station (IEC 835-3-10 : 1994) |
|
CENELEC EN 60870-5-101 |
Telecontrol Equipment and Systems - Part 5-101: Transmission Protocols - Companion Standard for Basic Telecontrol Tasks-IEC 60870-5-101:2003 |
|
CENELEC EN 60870-6-502 |
Telecontrol Equipment and Systems Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations Section 502: TASE.1 Protocol Definitions (IEC 870-6-502 : : 1995) |
|
CENELEC EN 60870-6-701 |
Telecontrol Equipment and Systems Part 6-701: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations Functional Profile for Providing the TASE.1 Application Service in End Systems-IEC 60870-6-701:1998 |
|
CENELEC EN 60874-1-1 |
Connectors for optical fibres and cables - Part 1-1: Blank detail specification |
|
CENELEC EN 60876-1 |
Fibre Optic Spatial Switches Part 1: Generic Specification-IEC 60876-1:2001 |
|
CENELEC EN 60933-5 |
Audio, Video and Audiovisual Systems Interconnections and Matching Values Part 5: Y/C Connector for Video Systems - Electrical Matching Values and Description of the Connector (IEC 933-5: 1992) |
|
CENELEC EN 60948 |
Numeric Keyboard for Home Electronic Systems (HES) |
|
CENELEC EN 61000-4-18 |
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test-Incorporating corrigendum September 2007 |
|
CENELEC EN 61073-1 |
Mechanical Splices and Fusion Splice Protectors for Optical Fibres and Cables - Part 1: Generic Specification-IEC 61073-1: 1999 |
|
CENELEC EN 61158-2 |
Digital data communications for measurement and control - Fieldbus for use in industrial control systems Part 2: Physical layer specification and service definition-IEC 61158-2:2003 + corrigendum 2004; Partially supersedes EN 50170:1996 + A1:2002 + A2:1999 + A3:2002 and EN 50254:1998 |
|
CENELEC EN 61169-29 |
Radio-frequency connectors Part 29: Sectional specification Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) Characteristic impedance 50 ohms (type 1,0/2,3) 50 ohms and 75 ohms applications-IEC 61169-29:2005 |
|
CENELEC EN 61169-37 |
Radio-frequency connectors - Part 37: Sectional specification for STWX8 R.F connectors |
|
CENELEC EN 61196-3-2 |
Radio Frequency Cables Part 3-2: Coaxial Cables for Digital Communication in Horizontal Floor Wiring Detail Specification for Coaxial Cables with Solid Dielectric for Local Area Networks of 185 m Reach and up to 10 Mb/s-IEC 61196-3-2: 1997 |
|
CENELEC EN 61196-4 |
Coaxial communication cables Part 4: Sectional specification for radiating cables-IEC 61196-4:2004 |
|
CENELEC EN 61202-1 |
Fibre Optic Isolators - Part 1: Generic Specification-IEC 61202-1:2000 |
|
CENELEC EN 61248-2 |
Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 2: Sectional Specification for Signal Transformers on the Basis of the Capability Approval Procedure-IEC 61248-2: 1996 |
|
CENELEC EN 61280-2-1 |
Fibre Optic Communication Subsystem Basic Test Procedures - Part 2-1: Test Procedures for Digital Systems - Receiver Sensitivity and Overload Measurement-IEC 61280-2-1: 1998 |
|
CENELEC EN 61280-2-4 |
Fibre Optic Communication Subsystem Basic Test Procedures - Part 2.4: Test Procedures for Digital Systems Bit-Rate Tolerance Measurement-IEC 61280-2-4:1998 |
|
CENELEC EN 61280-2-8 |
Fibre optic communication subsystem test procedures Digital systems Part 2-8: Determination of low BER using Q-factor measurements-IEC 61280-2-8:2003 |
|
CENELEC EN 61280-4-4 |
Fibre optic communication subsystem test procedures Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links |
|
CENELEC EN 61281-1 |
Fibre Optic Communication Subsystems Part 1: Generic Specification-IEC 61281-1: 1999 |
|
CENELEC EN 61290-10-4 |
Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer |
|
CENELEC EN 61290-1-1 |
Optical amplifiers - Test methods Part 1-1: Power and gain parameters - Optical spectrum analyzer method |
|
CENELEC EN 61290-5-1 |
Optical amplifiers - Test methods Part 5-1: Reflectance parameters - Optical spectrum analyzer method-IEC 61290-5-1 |
|
CENELEC EN 61290-5-3 |
Optical Fibre Amplifiers - Basic Specification Part 5-3: Test Methods for Reflectance Parameters - Reflectance Tolerance Using an Electrical Spectrum Analyser-IEC 61290-5-3: 2002 |
|
CENELEC EN 61298-3 |
Process Measurement and Control Devices General Methods and Procedures for Evaluating Performance Part 3: Tests for the Effects of Influence Quantities-IEC 61298-3:1998 |
|
CENELEC EN 61300-2-1 |
Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests - Vibration (sinusoidal)-IEC 61300-2-1: 2003 |
|
CENELEC EN 61300-2-18 |
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures Part 2-18: Tests – Dry heat – High temperature endurance |
|
CENELEC EN 61300-2-19 |
Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state)-IEC 61300-2-19: 2005 |
|
CENELEC EN 61300-2-2 |
Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-2: Tests - Mating Durability-IEC 61300-2-2: 2003 |
|
CENELEC EN 61300-2-24 |
Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-24: Tests - Screeen Testing of Ceramic Alignment Split Sleeve by Stress Application-IEC 61300-2-24: 1999 |
|
CENELEC EN 61300-2-38 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-38: Tests - Sealing for pressurized fibre optic closures |
|
CENELEC EN 61300-2-41 |
Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-41: Tests - Screen Testing of Attenuation of Single-Mode Tuned Non-Angled Optical Fibre Connectors-IEC 61300-2-41:1998 |
|
CENELEC EN 61300-2-43 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-43: Tests - Screen Testing of Return Loss of Single Mode PC Optical Fibre Connectors-IEC 61300-2-43: 1999 |
|
CENELEC EN 61300-2-44 |
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-44: Tests – Flexing of the strain relief of fibre optic devices-IEC 61300-2-44: 2004 |
|
CENELEC EN 61300-2-50 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode |
|
CENELEC EN 61300-3-13 |
Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-13: Examinations and Measurements Control Stability of a Fibre Optic Switch-IEC 61300-3-13: 1995 |
|
CENELEC EN 61300-3-17 |
Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-17: Examinations and Measurements Endface Angle of Angle-Polished Ferrules-IEC 61300-3-17: 1999 |
|
CENELEC EN 61300-3-37 |
Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-37: Examinations and measurements Endface angle of angle-polished optical fibres |
|
CENELEC EN 61315 |
Calibration of Fibre Optic Power Meters-IEC 61315: 2005 |
|
CENELEC EN 61334-4-511 |
Distribution Automation Using Distribution Line Carrier Systems Part 4-511: Data Communication Protocols - Systems Management - CIASE Protocol-IEC 61334-4-511: 2000 |
|
CENELEC EN 61334-4-512 |
Distribution Automation Using Distribution Line Carrier Systems Part 4-512: Data Communication Protocols - System Management Using Profile 61334-5-1 - Management Information Base (MIB)-IEC 61334-4-512:2001 |
|
CENELEC EN 61606-4 |
Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics Part 4: Personal computer |
|
CENELEC EN 61753-062-6 |
Fibre optic interconnecting devices and passive components performance standard - Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test |
|
CENELEC EN 61753-092-6 |
Fibre optic interconnecting devices and passive components performance standard - Part 092-6: Non-connectorized single-mode circulators for category O - Uncontrolled environment and sequential test |
|
CENELEC EN 61937-1 |
Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 1: General |
|
CENELEC EN 62261-2 |
Television METADATA Part 2: Data encoding protocol using key-length-value |
|
CEN EN ISO 16484-2 |
Building automation and control systems (BACS) Part 2: Hardware-ISO 16484-2:2004 |
|
CEN EN ISO 16484-5 |
Building automation and control systems - Part 5: Data communication protocolcity-ISO 16484-5:2003; Supersedes ENV 1805-1:1998 |
|
CEN EN ISO 19112 |
Geographic information - Spatial referencing by geographic identifiers-ISO 19112:2003 |
|
CEN EN ISO 19113 |
Geographic information - Quality principles-ISO 19113:2002 |
|
CEN EN ISO 19115 |
Geographic information - Metadata-ISO 19115:2003 |
|
CEN EN ISO 24014-1 |
Public transport - Interoperable fare management system - Part 1: Architecture |
|
CEN EN ISO/IEC 9661 |
Information Technology - Data Interchange on 12,7 mm Wide Magnetic Tape Cartridges - 18 Tracks, 1 491 Data Bytes per Millimetre-Supersedes EN 29661: 1991; ISO/IEC 9661: 1994 |
|
CEN EN ISP 12061-2 |
Information Technology - Open Systems Interconnection - International Standardized Profiles: OSI Distributed Transaction Processing - Part 2: Support of OSI TP APDUs-ISO/IEC ISP 12061-2: 1995 |
|
CEN EN ISP 12068-2 |
Information Technology - International Standardized Profile FDI 4 - Directory Data Definitions - Use of Directory for OSI TP - Part 2: FDI 42 - Enhanced Naming and Addressing-ISO/IEC 12068-2:1996 |
|
CEN EN ISP 15124-1 |
Information Technology - International Standardized Profile FOD126 - Open Document Format: Image Applications - Enhanced Document Structure - Character, Raster Graphics, and Geometric Graphics Content Architecture - Part 1: Document Application Profile (DAP)-ISO/IEC ISP 15124-1:1996 |
|
CEN ENV 12 896 |
Road Transport and Traffic Telematics - Public Transport - Reference Data Model |
|
CEN ENV 12537-2 |
Medical Informatics - Registration of Information Objects Used for EDI in Healthcare - Part 2: Procedures for the Registration of Information Objects Used in Electronic Data Interchange (EDI) in Healthcare |
|
CEN ENV 12539 |
Medical Informatics - Request and Report Messages for Diagnostic Service Departments |
|
CEN ENV 12925 |
Bar Coding - Symbology Specifications - `PDF417´-Superseded by EN ISO 15438: 2003 |
|
CEN ENV 13149-2 |
Public Transport - Road Vehicle Scheduling and Control Systems - Part 2: WORLDFIP Cabling Specifications |
|
CEN ENV 13550 |
Advanced Manufacturing Technology - Systems Architecture - Enterprise Model Execution and Integration Services-Ratified European Text |
|
CEN ENV 13606-3 |
Health Informatics - Electronic Healthcare Record Communication - Part 3: Distribution Rules |
|
CEN ENV 13729 |
Health Informatics - Secure User Identification - Strong Authentication using Microprocessor Cards |
|
CEN ENV 40 003 |
AMD 1 Computer Integrated Manufacturing - Systems Architecture - Framework for Enterprise Modelling |
|
CEN ENV 41205 |
Information Systems Interconnection - File Transfer Access and Management - File Management |
|
CEN ENV 41211-1 |
Information Systems Interconnection - Virtual Terminal - Basic Class - A-Mode X.3 - Part 1 : Virtual Terminal Service |
|
CEN ENV 41211-3 |
Information Systems Interconnection - Virtual Terminal - Basic Class - A-Mode X.3 - Part 3: Underlying Layers Checklist |
|
CEN ENV 41506 |
Information Systems Interconnection - Data Stream Formats for Information Received from or Transmitted to the Teletex Service or Private Information Processing Systems Using Teletex Technology |
|
CEN CEN/TS 13149-3 |
Public transport - Road vehicle scheduling and control systems - Part 3: WorldFIP message content |
|
CENELEC CLC/TR 50501-1 |
Railway applications – Rolling stock – Intercommunication between vehicles and train/wayside – Part 1: Data dictionary and rules for functional standardisation |
|
CENELEC CLC/TR 50510 |
Fibre optic access to end-user - A guideline to building of FTTX fibre optic network |
|
CENELEC CLC/TS 50431 |
Optical fibre cables Drinking water pipe cables Family specification for cables to be installed in drinking water pipes |
|
CENELEC CLC/TS 61970-2 |
Energy management system application program interface (EMS-API) Part 2: Glossary |
|
CENELEC DD CLC/TS 62441 |
Accidentally caused candle flame ignition for audio/video, communication and information technology equipment |
|
CEN EN 12967-3 |
Health informatics - Service architecture - Part 3: Computational viewpoint |
|
CEN EN 13606-2 |
Health informatics - Electronic health record communication - Part 2: Archetypes interchange specification |
|
CENELEC EN 50065-4-7 |
Signalling on lowvoltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz Part 4-7: Portable low voltage decoupling filters - Safety requirements-Incorporating corrigendum October 2006 |
|
CENELEC EN 50090-2-1 |
Communication cables Part 2-1: Common design rules and construction |
|
CENELEC EN 50117-2-3 |
Coaxial cables Part 2-3: Sectional specification for cables used in cabled distribution networks Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz |
|
CENELEC EN 50117-5 |
Coaxial Cables Used in Cabled Distribution Networks; Part 5: Sectional Specification for Indoor Drop Cables for Use in Networks Operating at Frequencies between 5 MHz and 2150 MHz |
|
CENELEC EN 50117-6 |
Coaxial Cables Used in Cabled Distribution Networks; Part 6: Sectional Specification for Outdoor Drop Cables for Use in Networks Operating at Frequencies between 5 MHz and 2150 MHz |
|
CENELEC EN 50173-4 |
Information technology - Generic cabling systems - Part 4: Homes |
|
CENELEC EN 50255 |
Digital Audio Broadcasting System - Specification of the Receiver Data Interface (RDI) |
|
CENELEC EN 50288-2-1 |
Multi-element metallic cables used in analogue and digital communication and control Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables |
|
CENELEC EN 50288-3-2 |
Multi-element metallic cables used in analogue and digital communication and control Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables |
|
CENELEC EN 50288-4-2 |
Multi-element metallic cables used in analogue and digital communication and control Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables |
|
CENELEC EN 50289-1-9 |
Communication Cables - Specifications for Test Methods Part 1-9: Electrical Test Methods - Unbalance Attenuation (Longitudinal Conversion Loss, Longitudinal Conversion Transfer Loss) |
|
CENELEC EN 50289-3-11 |
Communication Cables - Specifications for Test Methods - Part 3-11: Mechanical Test Methods - Cable Cut-Through Resistance |
|
CENELEC EN 50289-3-6 |
Communication Cables - Specifications for Test Methods Part 3-6: Mechanical Test Methods - Impact Resistance of the Cable |
|
CENELEC EN 50289-4-12 |
Communication cables Specifications for test methods Part 4-12: Environmental test methods Vertical flame spread test on bunched small communication cables |
|
CENELEC EN 50290-1-1 |
Communication Cables - Part 1-1: General |
|
CENELEC EN 50290-2-1 |
Communication cables Part 2-1: Common design rules and construction |
|
CENELEC EN 50290-2-20 |
Communication Cables - Part 2-20: Common Design Rules and Construction - General-Supersedes HD 624.0 S1:1997 |
|
CENELEC EN 50290-2-21 |
Communication Cables - Part 2-21: Common Design Rules and Construction - PVC Insulation Compounds-Incorporates Amendment A1: 2007 |
|
CENELEC EN 50377-8-9 |
Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-9: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U |
|
CENELEC EN 50411-2-2 |
Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A |
|
CENELEC EN 60094-4 |
Magnetic Tape Sound Recording and Reproducing Systems Part 4: Mechanical Magnetic Tape Properties (Includes AMD A1: 1994) (IEC 94-4 : 1986) |
|
CENELEC EN 60107-2 |
Methods of Measurement on Receivers for Television Broadcast Transmissions Part 2: Audio Channels - General Methods and Methods for Monophonic Channels-IEC 60107-2:1997 |
|
CENELEC EN 60268-12 |
Sound System Equipment Part 12: Application of Connectors for Broadcast and Similar Use (Includes Amendment A2 : 1995) (IEC 268-12 : 1987 + A1 : 1991 + A2 : 1994) |
|
CENELEC EN 60679-5 |
Quartz Crystal Controlled Oscillators of Assessed Quality Part 5: Sectional Specification - Qualification Approval-IEC 60679-5:1998 |
|
CENELEC EN 60728-10 |
Cable networks for television signals, sound signals and interactive services Part 10: System performance for return paths-Incorporating Corrigendum April 2006; Supersedes EN 50083-10:2002 |
|
CENELEC EN 60774-2 |
Helical-Scan Video Tape Cassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS - PART 2:FM Audio Recording-Supersedes BS EN 61054:1993; IEC 60774-2:1999 |
|
CENELEC EN 60793-1-22 |
Optical Fibres Part 1-22: Measurement Methods and Test Procedures - Length Measurement-IEC 60793-1-22:2001; Partly Supersedes EN 188000:1992 |
|
CENELEC EN 60793-1-30 |
Optical Fibres Part 1-30: Measurement Methods and Test Procedures - Fibre Proof Test-IEC 60793-1-30:2001; Partly Supersedes EN 188000:1992 |
|
CENELEC EN 60793-1-32 |
Optical fibres Part 1-32: Measurement methods and test procedures Coating strippability |
|
CENELEC EN 60793-1-44 |
Optical Fibres Part 1-44: Measurement Methods and Test Procedures - Cut-Off Wavelength-IEC 60793-1-44:2001; Partly Supersedes EN 188000:1992 |
|
CENELEC EN 60793-1-47 |
Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss |
|
CENELEC EN 60793-1-48 |
Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion |
|
CENELEC EN 60793-2-10 |
Optical fibres Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres-IEC 60793-2-10:2004 |
|
CENELEC EN 60793-2-30 |
Optical fibres Part 2-30: Product specifications Sectional specification for category A3 multimode fibres-IEC 60793-2-30: 2002 |
|
CENELEC EN 60793-2-50 |
Optical fibres Part 2-50: Product specifications – Sectional specification for class B single-mode fibres-IEC 60793-2-50:2004; Incorporates Corrigendum: July 2004 |
|
CENELEC EN 60794-2-21 |
Optical fibre cables Part 2-21: Indoor cables – Detailed specification for multi-fibre optical distribution cables for use in premises cabling-IEC 60794-2-21: 2005 |
|
CENELEC EN 60794-2-30 |
Optical fibre cables Part 2-30: Indoor cables Family specification for optical fibre ribbon cables-IEC 60794-2-30: 2003 |
|
CENELEC EN 60794-2-31 |
Optical fibre cables Part 2-31: Indoor cables – Detailed specification for optical fibre ribbon cables for use in premises cabling-IEC 60794-2-31: 2005 |
|
CENELEC EN 60794-3-20 |
Optical fibre cables Part 3-20: Outdoor cables - Family specification for optical self-supporting aerial telecommunication cables-IEC 60794-3-20: 2002, Modified; Supersedes EN 187102: 1995 |
|
CENELEC EN 60794-3-21 |
Optical fibre cables Part 3-21: Outdoor cables - Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling-IEC 60794-3-21:2005 |
|
CENELEC EN 60794-4-10 |
Optical fibre cables - Part 4-10: Aerial optical cables along electrical power lines - Family specification for OPGW (Optical Ground Wires) |
|
CENELEC EN 60794-5 |
Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing |
|
CENELEC EN 60835-3-6 |
Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on Satellite Earth Stations Section 6: High Power Amplifiers-IEC 835-3-6: 1996 |
|
CENELEC EN 60843-4 |
Helical-Scan Video Tape Cassette System Using 8 mm Magnetic Tape (8 mm Video) Part 4: Video Subcode (VSC)-IEC 60843-4:2000 |
|
CENELEC EN 60852-4 |
Outline Dimensions of Transformers and Inductors for Use in Telecommunication and Electronic Equipment Part 4: Transformers and Inductors Using YUI-2 Laminations-IEC 852-4: 1996 |
|
CENELEC EN 60870-5-1 |
Telecontrol Equipment and Systems Part 5: Transmission Protocols Section One: Transmission Frame Formats (IEC 870-5-1 : 1990) |
|
CENELEC EN 60870-5-4 |
Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 4: Definition and Coding of Application Information Elements (IEC 870-5-4 : 1993) |
|
CENELEC EN 60870-5-5 |
Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 5: Basic Application Functions (IEC 870-5-5 : 1995) |
|
CENELEC EN 61000-4-34 |
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase |
|
CENELEC EN 61146-1 |
Video Cameras (PAL/SECAM/NTSC) Methods of Measurement Part 1: Non-Broadcast Single-Sensor Cameras-IEC 1146-1 : 1994 |
|
CENELEC EN 61158-4 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems Part 4: Data link protocol specification-IEC 61158-4:2003 + corrigendum 2004; Partially supersedes EN 50170:1996 + A1:2002 + A2:1999 + A3:2002 and EN 50254:1998 |
|
CENELEC EN 61158-5 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems Part 5: Application layer service definition-IEC 61158-5:2003 + corrigendum 2004; Partially supersedes EN 50170:1996 + A1:2002 + A2:1999 + A3:2002 and EN 50254:1998 |
|
CENELEC EN 61169-31 |
Radio-Frequency Connectors - Part 31: RF Coaxial Connectors with Inner Diameter of Outer Conductor 1,0 mm (0,039 in) with Screw Coupling - Characterisyic Impedance - 50 ohms (Type 1,0)-IEC 1169-31: 1999 |
|
CENELEC EN 61223-3-4 |
Evaluation and Routine Testing in Medical Imaging Departments Part 3-4: Acceptance Tests Imaging Performance of Dental X-Ray Equipment-IEC 61223-3-4: 2000 |
|
CENELEC EN 61248-4 |
Transformers and Inductors for Use in Electronic and Telecommunication Equipment Part 4: Sectional Specification for Power Transformers for Switched Mode Power Supplies (SMPS) on the Basis of the Capability Approval Procedure-IEC 61248-4: 1996 |
|
CENELEC EN 61280-4-2 |
Fibre Optic Communication Subsystem Basic Test Procedures Part 4-2: Fibre Optic Cable Plant Single-Mode Fibre Optic Cable Plant Attenuation-IEC 61280-4-2: 1999 |
|
CENELEC EN 61290-10-1 |
Optical amplifiers Test methods Part 10-1: Multichannel parameters Pulse method using an optical switch and optical spectrum analyzer-IEC 61290-10-1:2003 |
|
CENELEC EN 61290-1-3 |
Optical amplifiers - Test methods Part 1-3: Power and gain parameters - Optical power meter method-IEC 61290-1-3:2005 |
|
CENELEC EN 61290-2-2 |
Optical Fibre Amplifiers - Basic Specification Part 2-2: Test Methods for Optical Power Parameters Electrical SPectrum Analyzer-IEC 61290-2-2: 1998 |
|
CENELEC EN 61290-3 |
Optical Fibre Amplifiers - Basic Specification - Part 3: Test Methods for Noise Figure Parameters-IEC 61290-3:2000 |
|
CENELEC EN 61290-6-1 |
Optical Fibre Amplifiers - Basic Specification Part 6-1: Test Methods for Pump Leakage Parameters Optical Demultiplexer-IEC 61290-6-1: 1998 |
|
CENELEC EN 61290-7-1 |
Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method |
|
CENELEC EN 61300-2-17 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-17: Tests - Cold-IEC 61300-2-17: 2003 |
|
CENELEC EN 61300-2-23 |
Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-23: Tests - Sealing for Non-Pressurized Closures of Fibre Optic Devices-IEC 61300-2-23: 1995 |
|
CENELEC EN 61300-2-40 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures Part 2-40: Tests - Screen Testing of Attenuation of Single-Mode Tuned Angles Optical Connectors-IEC 61300-2-40: 2000 |
|
CENELEC EN 61300-3-12 |
Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-12: Examinations and Measurements - Polarization Dependence of Attenuation of a Single-Mode Fibre Optic Component: Matrix Calculation Method-IEC 61300-3-12: 1997 |
|
CENELEC EN 61300-3-14 |
Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-14: Examinations and Measurements - Accuracy and Repeatability of the Attenuation Settings of a Variable Attenuator-IEC 61300-3-14: 1995 |
|
CENELEC EN 61300-3-23 |
Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-23: Examination and Measurements Fibre Position Relative to Ferrule Endface-IEC 61300-3-23:1998 |
|
CENELEC EN 61300-3-3 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss-IEC 61300-3-3: 2003 |
|
CENELEC EN 61300-3-4 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures Part 3-4: Examinations and Measurements - Attenuation-IEC 61300-3-4:2001 |
|
CENELEC EN 61300-3-7 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures Part 3-7: Examinations and Measurements - Wavelength Dependance of Attenuation and Return Loss-IEC 61300-3-7:2000 |
|
CENELEC EN 61334-4-33 |
Distribution Automation Using Distribution Line Carrier Systems Part 4-33: Data Communication Protocols Data Link Layer - Connection Oriented Protocol-IEC 61334-4-33:1998 |
|
CENELEC EN 61334-4-61 |
Distribution Automation Using Distribution Line Carrier Systems Part 4-61: Data Communication Protocols - Network Layer Connectionless Protocol-IEC 61334-4-61:1998 |
|
CENELEC EN 61334-5-1 |
Distribution Automation Using Distribution Line Carrier Systems Part 5-1: Lower Layer Profiles - the Spread Frequency Shift Keying (S-FSK) Profile-IEC 61334-5-1:2001 |
|
CENELEC EN 61334-6 |
Distribution Automation Using Distribution Line Carrier Systems Part 6: A-XDR Encoding Rule-IEC 61334-6:2000 |
|
CENELEC EN 61753-1 |
Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
|
CENELEC EN 61850-7-410 |
Communication networks and systems for power utility automation - Part 7-410: Hydroelectric power plants - Communication for monitoring and control |
|
CENELEC EN 61937-8 |
Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 8: Non-linear PCM bitstreams according to the Windows Media Audio (WMA) Professional format |
|
CENELEC EN 61970-405 |
Energy management system application program interface (EMS-API) - Part 405: Generic Eventing and Subscription (GES) |
|
CENELEC EN 61987-1 |
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
|
CENELEC EN 62272-2 |
Digital radio mondiale (DRM) - Part 2: Digital radio in the bands below 30 MHz - Methods of measurement for DRM transmitters |
|
CEN EN ISO 11442 |
Technical product documentation - Document management |
|
CEN EN ISO 18104 |
Health Informatics - Integration of a reference terminology model for nursing-ISO 18104:2003; |
|
CEN EN ISO 19106 |
Geographic information - Profiles-ISO 19106: 2004 |
|
CEN EN ISO 19111 |
Geographic information - Spatial referencing by coordinates |
|
CEN EN ISO 19114 |
Geographic information - Quality evaluation procedures-Incorporating corrigendum July 2006; ISO 19114:2003 |
|
CEN EN ISO 19119 |
Geographic information - Services-ISO 19119: 2005 |
|
CEN EN ISO/IEC 11172-1 |
Information Technology - Coding of Moving Pictures and Information technology Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s Part 1: Systems-ISO/IEC 11172-1:1993 |
|
CEN EN ISO/IEC 11172-4 |
Information Technology - Coding of Moving Pictures and Associated Audio for Digital Storage Media at up to About 1,5 Mbit/s - Part 4. Compliance Testing-ISO/IEC 11172-4: 1995 |
|
CEN EN ISO/IEC 13818-3 |
Information Technology - Generic of Moving Coding Pictures Associated Audio Information - Part 3: Audio-ISO/IEC 13 818-3: 1995 |
|
CEN EN ISO/IEC 15423 |
Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing-:1997; ISO/IEC 15423:2004 |
|
CEN EN ISP 10608-6 |
Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 6: Definition of Profile TA54, Operation over an FDDI LAN Subnetwork-ISO/IEC ISP 10608-6: 1995 |
|
CEN EN ISP 10612-2 |
Information Technology - International Standardized Profile RD - Relaying the MAC Service Using Transparent Bridging - Part 2: CSMA/CD LAN Subnetwork-Dependent, Media-Dependent Requirements-ISO/IEC ISP 10612-2: 1995 |
|
CEN EN ISP 11181-1 |
Information Technology - International Standardized Profile FOD26 - Open Document Format: Enhanced Document Structure - Character, Raster Graphics and Geometric Graphics Content Architectures - Part 1: Document Application Profile (DAP) (Regional Variant of ISO/IEC ISPC 11181-1: 1993) |
|
CEN EN ISP 11183-2 |
Information Technology - International Standardized Profiles AOM1n OSI Management - Management Communications - Part 2: CMISE/ROSE for AOM12 - Enhanced Management Communications (ISO/IEC ISP 11183-2: 1992) |
|
CEN EN ISP 11190 |
Information Technology - International Standardized Profile FD13 - Directory Data Definitions - FTAM Use of the Directory (ISO/IEC ISP 11190 : 1995) |
|
CEN ENV 12 282 |
Paper - Printing and Business Paper - Determination of Edge Dust |
|
CEN ENV 12 694 |
Public Transport - Road Vehicles - Dimensional Requirements for Variable Electronic External Signs |
|
CEN ENV 12160 |
Geographic Information - Data Description - Spatial Schema |
|
CEN ENV 12313-4 |
Traffic and Traveller Information (TTI) - TTI Messages Via Traffic Message Coding - Part 4: Coding Protocol for Radio Data System - Traffic Message Channel (RDS-TMC) - RDS-TMC Using ALERT Plus with ALERT C |
|
CEN ENV 12537-1 |
Medical Informatics - Registration of Information Objects Used for EDI in Healthcare - Part 1: The Register |
|
CEN ENV 1257-1 |
Identification Card Systems - Rules for Personal Identification Number Handling in Intersector Environments - Part 1: PIN Presentation |
|
CEN ENV 1257-2 |
Identification Card Systems - Rules for Personal Identification Number Handling in Intersector Environments - Part 2: PIN Protection |
|
CEN ENV 12656 |
Geographic Information - Data Description - Quality |
|
CEN ENV 12657 |
Geographic Information - Data Description - Metadata |
|
CEN ENV 12661 |
Geographic Information - Referencing - Geographic Identifiers |
|
CEN ENV 13608-2 |
Health Informatics - Security for Healthcare Communication - Part 2: Secure Data Objects |
|
CEN ENV 13710 |
European Ordering Rules - Ordering of Characters from the Latin, Greek and Cyrillic Scripts |
|
CEN ENV 13735 |
Health Informatics - Interoperability of Patient Connected Medical Devices |
|
CEN ENV 14062-1 |
Identification Card Systems - Surface Transport Applications - Electronic Fee Collection - Part 1: Physical Characteristics, Electronic Signals and Transmission Protocols |
|
CEN ENV 14062-2 |
Identification Card Systems - Surface Transport Applications - Electronic Fee Collection - Part 2: Message Requirements |
|
CEN ENV 30 149 |
Information Processing Systems Data Interchange on Read-Only 120 mm Optical Data Disks |
|
CEN ENV 41 101 |
Information Systems Interconnection: Local Area Networks; Provision of the OSI Connection- Mode Transport Service Using Connectionless- Mode Network Service on a CSMA/CD Single LAN |
|
CEN ENV 41 107 |
Teleprocessing, Open System Interconnection, Data Transmission, Connection Oriented Transmission Digital Circuit, Services, Protocols, Physical Layer Network Layer, Data Link Layer, Transport Layer, Implementation |
|
CEN ENV 41 108 |
Information Systems Interconnection: Local Area Networks; Provision of the OSI Connection- Mode Transport Service and the OSI Connection- Mode Network Service in an End System on a Token Ring LAN |
|
CEN ENV 41 502/ A1 |
AMD 1 Information Systems Interconnection - Character Repertoires for Information Received from or Transmitted to the Teletex Service or Private Information Processing Systems Using Teletex Technology |
|
CEN ENV 41102 |
Information Systems Interconnection: Local Area Networks; Provision of the OSI Connection- Mode Transport Service and the OSI Connectionless-Mode Network Service on a CSMA/CO LAN in a Single or Multiple LAN Configuration |
|
CEN ENV 41113 |
Information Technology - Functional Standard for Profiles T/C 4311 and T/D 4311 - ISDN (Public/Private) - Packet Mode Service - D-Channel - Virtual Call (VC) |
|
CEN ENV 41502 |
Information Systems Interconnection -- Character Repertoires for Information Received from or Transmitted to the Teletex Service or Private Information Processing Systems Using Teletex Technology |
|
CEN ENV 41901 |
Information Technology - Functional Standard for Profiles Y/11 and Y/12 - Character Mode Terminals on PAD - X.29 over X.25, and X.28 (PSDN Character Mode Access) |
|
CEN ENV ISO 14 904 |
Road Transport and Traffic Telematics - Automatic Fee Collection (AFC) - Interface Specification for Clearing between Operators-ISO 14904: 1997 |