|
DIN EN 2240-023 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 023: Lamp, code 316; product standard |
|
DIN EN 2240-024 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 024: Lamp, code 327; product standard |
|
DIN EN 2240-025 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 025: Lamp, code 328; product standard |
|
DIN EN 2240-026 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 026: Lamp, code 330, product standard |
|
DIN EN 2240-027 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 027: Lamp, code 334, product standard |
|
DIN EN 2240-028 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 028: Lamp, code 337, product standard |
|
DIN EN 2240-029 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 029: Lamp, code 338, product standard |
|
DIN EN 2240-030 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 030: Lamp, code 345; product standard |
|
DIN EN 2240-032 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 032: Lamp, code 376, product standard |
|
DIN EN 2240-034 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 034: Lamp, code 382; product standard |
|
DIN EN 2240-036 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 036: Lamp, code 388; product standard |
|
DIN EN 2240-037 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 037: Lamp, code 394; product standard |
|
DIN EN 2240-038 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 038: Lamp, code 401; product standard |
|
DIN EN 2240-039 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 039: Lamp, code 600; product standard |
|
DIN EN 2240-041 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 041: Lamp, code 682; product standard |
|
DIN EN 2240-042 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 042: Lamp, code 683; product standard |
|
DIN EN 2240-043 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 043: Lamp, code 685; product standard |
|
DIN EN 2240-044 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 044: Lamp, code 713; product standard |
|
DIN EN 2240-045 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 045: Lamp, code 714; product standard |
|
DIN EN 2240-046 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 046: Lamp, code 715; product standard |
|
DIN EN 2240-047 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 047: Lamp, code 718; product standard |
|
DIN EN 2240-048 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 048: Lamp, code 718 NPC; product standard |
|
DIN EN 2240-049 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 049: Lamp, code 757; product standard |
|
DIN EN 2240-051 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 051: Lamp, code 1163; product standard |
|
DIN EN 2240-052 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 052: Lamp, code 1222; product standard |
|
DIN EN 2240-054 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 054: Lamp, code 1317; product standard |
|
DIN EN 2240-055 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 055: Lamp, code 1495; product standard |
|
DIN EN 2240-056 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 056: Lamp, code 1506; product standard |
|
DIN EN 2240-057 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 057: Lamp, code 1512; product standard |
|
DIN EN 2240-058 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 058: Lamp, code 1524; product standard |
|
DIN EN 2240-059 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 059: Lamp, code 1591; product standard |
|
DIN EN 2240-060 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 060: Lamp, code 1619; product standard |
|
DIN EN 2240-061 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 061: Lamp, code 1683; product standard |
|
DIN EN 2240-062 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 062: Lamp, code 1810; product standard |
|
DIN EN 2240-063 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 063: Lamp, code 1815; product standard |
|
DIN EN 2240-064 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 064: Lamp, code 1819; product standard |
|
DIN EN 2240-065 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 065: Lamp, code 1820; product standard |
|
DIN EN 2240-066 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 066: Lamp, code 1829; product standard |
|
DIN EN 2240-067 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 067: Lamp, code 1843; product standard |
|
DIN EN 2240-068 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 068: Lamp, code 1864; product standard |
|
DIN EN 2240-069 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 069: Lamp, code 1978; product standard |
|
DIN EN 2240-070 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 070: Lamp, code 2232; product standard |
|
DIN EN 2240-071 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 071: Lamp, code 3011; product standard |
|
DIN EN 2240-072 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 072: Lamp, code 3912; product standard |
|
DIN EN 2240-073 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 073: Lamp, code 4174; product standard |
|
DIN EN 2240-074 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 074: Lamp, code 5086; product standard |
|
DIN EN 2240-075 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 075: Lamp, code 5448; product standard |
|
DIN EN 2240-076 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 076: Lamp, code 5678; product standard |
|
DIN EN 2240-077 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 077: Lamp, code 6832; product standard |
|
DIN EN 2240-078 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 078: Lamp, code 6838; product standard |
|
DIN EN 2240-079 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 079: Lamp, code 6839; product standard |
|
DIN EN 2240-080 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 080: Lamp, code 7007-704; product standard |
|
DIN EN 2240-081 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 081: Lamp, code 7070; product standard |
|
DIN EN 2240-083 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 083: Lamp, code 7152; product standard |
|
DIN EN 2240-084 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 084: Lamp, code 7153; product standard |
|
DIN EN 2240-085 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 085: Lamp, code 7265; product standard |
|
DIN EN 2240-086 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 086: Lamp, code 7333; product standard |
|
DIN EN 2240-087 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 087: Lamp, code 7341; product standard |
|
DIN EN 2240-088 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 088: Lamp, code A7512-12; product standard |
|
DIN EN 2240-089 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 089: Lamp, code A7512-24; product standard |
|
DIN EN 2240-090 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 090: Lamp, code 7683; product standard |
|
DIN EN 2240-091 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 091: Lamp, code 7714; product standard |
|
DIN EN 2240-092 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 092: Lamp, code 7715; product standard |
|
DIN EN 2240-094 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 094: Lamp, code 8022; product standard |
|
DIN EN 2240-095 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 095: Lamp, code 8552; product standard |
|
DIN EN 2240-097 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 097: Lamp, code 72601-12; product standard |
|
DIN EN 2240-098 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 098: Lamp, code 416650; product standard |
|
DIN EN 2240-099 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 099: Lamp, code 416700; product standard |
|
DIN EN 2240-101 |
(DRAFT) Aerospace series - Lamps, incandescent - Part 101: Lamp, code 404-02; product standard |
|
DIN EN 2243-1 |
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear; German and English version EN 2243-1:2005 |
|
DIN EN 2243-2 |
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal; German and English version EN 2243-2:2005 |
|
DIN EN 2243-3 |
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core; German and English version EN 2243-3:2005 |
|
DIN EN 2243-5 |
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests; German and English version EN 2243-5:2005 |
|
DIN EN 2256 |
Aerospace series - Aluminium alloy AL-P2618A-T852 - Hand and die forgings - a ≤ 150 mm; German and English version EN 2256:2004 |
|
DIN EN 2257 |
Aerospace series - Circular tubes for structures in aluminium and aluminium alloys; diameter 6 mm ≤ D ≤ 100 mm, thickness 1 mm ≤ a ≤ 6 mm; dimensions; German version EN 2257:1997 |
|
DIN EN 2258 |
Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys; diameter 3,2 mm ≤ D ≤ 100 mm, thickness 0,6 mm ≤ a ≤ 2,5 mm; dimensions; German version EN 2258:1997 |
|
DIN EN 2260 |
Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD; German version EN 2260:1995 |
|
DIN EN 2261 |
Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD; German version EN 2261:1995 |
|
DIN EN 2262 |
Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD; German version EN 2262:1995 |
|
DIN EN 2264 |
Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2264:1996 |
|
DIN EN 2265-002 |
(DRAFT) Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 °C and 150 °C - Part 002: General |
|
DIN EN 2265-003 |
(DRAFT) Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 °C and 150 °C - Part 003: Ink jet printable; product standard |
|
DIN EN 2265-004 |
(DRAFT) Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 °C and 150 °C - Part 004: CO2 laser printable; product standard |
|
DIN EN 2265-005 |
(DRAFT) Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 °C and 150 °C - Part 005: UV laser printable; product standard |
|
DIN EN 2265-006 |
(DRAFT) Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 °C and 150 °C - Part 006: YAG X3 laser printable; product standard |
|
DIN EN 2266-002 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 002: General; German and English version EN 2266-002:2005 |
|
DIN EN 2266-003 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 003: Ink jet printable - Product standard; German and English version EN 2266-003:2005 |
|
DIN EN 2266-005 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 005: UV-laser printable - Product standard; German and English version EN 2266-005:2005 |
|
DIN EN 2266-006 |
(DRAFT) Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 °C and 200 °C - Part 006: YAG X3 laser printable; product standard |
|
DIN EN 2266-007 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 007: UV laser printable multicore jacketed cable - Product standard; German and English version EN 2266-007:2005 |
|
DIN EN 2267-002 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 002: General; German and English version EN 2267-002:2005 |
|
DIN EN 2267-003 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 003: Ink jet printable - Product standard; German and English version EN 2267-003:2005 |
|
DIN EN 2267-004 |
(DRAFT) Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 °C and 260 °C - Part 004: CO2 laser printable; product standard |
|
DIN EN 2267-006 |
(DRAFT) Aerospace series - Cables, electrical, for general purpose; operating temperatures between -55 °C and 260 °C - Part 006: YAG X3 laser printable; product standard |
|
DIN EN 2267-007 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard; German and English version EN 2267-007:2005 |
|
DIN EN 2267-008 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 008: DM family, single UV laser printable and muticore assembly - Product standard; German and English version EN 2267-008:2005 |
|
DIN EN 2267-009 |
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 009: DRA family, single and multicore assembly - Product standard; German and English version EN 2267-009:2005 |
|
DIN EN 2283 |
Aerospace series - Testing of aircraft wiring; German version EN 2283:1996 |
|
DIN EN 2289 |
Aerospace series - Rod bodies in aluminium alloy for flight controls - Technical specification; German version EN 2289:1996 |
|
DIN EN 2304 |
(DRAFT) Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15), solution treated and precipitation treated - Hand and die forgings De ≤ 100 mm, Rm ≥ 960 MPa |
|
DIN EN 2318 |
Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections 1,2 mm ≤ a or D ≤ 150 mm; German version EN 2318:1992 |
|
DIN EN 2327 |
Aerospace series - Washers, lock, with radial serrations in alloy steel, cadmium plated, for flight control rods - Dimensions; German and English version EN 2327:2006 |
|
DIN EN 2328 |
Aerospace series - Washers, tab in corrosion resisting steel, cadmium plated, for flight control rods - Dimensions; German and English version EN 2328:2006 |
|
DIN EN 2334 |
Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys; German version EN 2334:1997 |
|
DIN EN 2335 |
Aerospace series - Bearings, spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads; German and English version EN 2335:2005 |
|
DIN EN 2336 |
Aerospace series - Bearings, spherical plain in steel with assembly slots - Dimensions and loads; German and English version EN 2336:2005 |
|
DIN EN 2337 |
(DRAFT) Aerospace series - Spherical plain bearings - Technical specification |
|
DIN EN 2337 |
Aerospace series - Spherical plain bearings - Technical specification; German and English version EN 2337:2006 |
|
DIN EN 2337 |
Aerospace series - Spherical plain bearings - Technical specification; German version EN 2337:1996 |
|
DIN EN 2339 |
Aerospace series - Sheets, cold rolled, in titanium and titanium alloys, thickness 0,2 mm≤a≤6 mm - Dimensions; German and English version EN 2339:2001 |
|
DIN EN 2343 |
(DRAFT) Aerospace series - Heat and crazing resistant cast and multi-axially orientatet acrylic sheets for aircraft glacing - Technical specification |
|
DIN EN 2344 |
Aerospace series - Round bars, machined, in heat resisting alloys - Diameter 10 mm ≤ D ≤ 180 mm; Dimensions; German and English version EN 2344:2001 |
|
DIN EN 2345 |
(DRAFT) Aerospace series - Aluminium and aluminium alloy rivets - Technical specification |
|
DIN EN 2345-1 |
(DRAFT) Aerospace series - Rivets, solid in aluminium and aluminium alloy, inch based series - Technical specification |
|
DIN EN 2345-2 |
(DRAFT) Aerospace series - Rivets, solid, in aluminium and aluminium alloy, metric series - Technical specification |
|
DIN EN 2346-002 |
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 002: General; German and English version EN 2346-002:2006 |
|
DIN EN 2346-003 |
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 003: DL family, single core - Product standard; German and English version EN 2346-003:2006 |
|
DIN EN 2346-004 |
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard; German and English version EN 2346-004:2006 |
|
DIN EN 2349 |
(DRAFT) Aerospace series - Requirements and test procedures for switching devices |
|
DIN EN 2349-201 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 201: Visual inspection; German and English version EN 2349-201:2006 |
|
DIN EN 2349-202 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass; German and English version EN 2349-202:2006 |
|
DIN EN 2349-301 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 301: Pick-up and drop-out voltage; German and English version EN 2349-301:2006 |
|
DIN EN 2349-302 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 302: Insulation resistance; German and English version EN 2349-302:2006 |
|
DIN EN 2349-304 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time; German and English version EN 2349-304:2006 |
|
DIN EN 2349-305 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time; German and English version EN 2349-305:2006 |
|
DIN EN 2349-306 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.; German and English version EN 2349-306:2006 |
|
DIN EN 2349-307 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 307: Contact voltage drop; German and English version EN 2349-307:2006 |
|
DIN EN 2349-308 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 308: Coil current; German and English version EN 2349-308:2006 |
|
DIN EN 2349-309 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes; German and English version EN 2349-309:2006 |
|
DIN EN 2349-310 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 310: Rupture; German and English version EN 2349-310:2006 |
|
DIN EN 2349-312 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 312: Electrical service life - Mixed load; German and English version EN 2349-312:2006 |
|
DIN EN 2349-316 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 316: Mechanical life (Endurance at reduced load); German and English version EN 2349-316:2006 |
|
DIN EN 2349-317 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 317: Service life of coil switching device; German and English version EN 2349-317:2006 |
|
DIN EN 2349-318 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature; German and English version EN 2349-318:2006 |
|
DIN EN 2349-319 |
(DRAFT) Aerospace series - Requirements and test procedures for relays and contactors - Part 319: Miss test |
|
DIN EN 2349-402 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 402: Corrosion, salt spray; German and English version EN 2349-402:2006 |
|
DIN EN 2349-405 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 405: Fluid resistance; German and English version EN 2349-405:2006 |
|
DIN EN 2349-407 |
Aerospace series - Requirements and test procedures for relays and contactors - Part 407: Cold/low pressure and moist heat; German and English version EN 2349-407:2006 |
|
DIN EN 2349-409 |
(DRAFT) Aerospace series - Requirements and test procedures for relays and contactors - Part 409: Ozone resistance |
|
DIN EN 2349-410 |
(DRAFT) Aerospace series - Requirements and test procedures for relays and contactors - Part 410: Mould |
|
DIN EN 2349-411 |
(DRAFT) Aerospace series - Requirements and test procedures for relays and contactors - Part 411: Temperature change |
|
DIN EN 2349-412 |
(DRAFT) Aerospace series - Requirements and test procedures for relays and contactors - Part 412: Seal |
|
DIN EN 2349-414 |
(DRAFT) Aerospace series - Requirements and test procedures for relays and contactors - Part 414: Mechanical shock |
|
DIN EN 2349-415 |
(DRAFT) Aerospace series - Requirements and test procedures for relays and contactors - Part 415: Acceleration |
|
DIN EN 2349-601 |
(DRAFT) Aerospace series - Requirements and test procedures for relays and contactors - Part 601: Compass safety distance |
|
DIN EN 2368 |
(DRAFT) Aerospace series; round bars, heat resisting alloys, machined, diameter 10 mm ≤ D ≤ 180 mm; dimensions |
|
DIN EN 2378 |
Aerospace series - Fibre reinforced plastics - Determination of water absorption by immersion; German version EN 2378:1995 |
|
DIN EN 2379 |
(DRAFT) Aerospace series - Fluids for assessment of non-metallic materials |
|
DIN EN 2381 |
Aerospace series; aluminium alloy AL-P7009-T7452; hand forgings 40 mm ≤ a ≤ 150 mm; German version EN 2381:1992 |
|
DIN EN 2382 |
(DRAFT) Aerospace series - Aluminium alloy AL-P2214-T6 - Hand and die forgings a ≤ 100 mm |
|
DIN EN 2383 |
(DRAFT) Aerospace series - Aluminium alloy AL-P2214-T4 - Hand and die forgings a ≤ 100 mm |
|
DIN EN 2385 |
Aerospace series; aluminium alloy AL-P7009-T74511; extruded bars and sections a or D ≤ 125 mm; German version EN 2385:1992 |
|
DIN EN 2386 |
(DRAFT) Aerospace series - Aluminium alloy AL-P7075-T7352 - Hand forgings a ≤ 150 mm |
|
DIN EN 2405 |
(DRAFT) Aerospace series - Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) solution treated and precipitation treated - Hand and die forgings, De ≤ 200 mm |
|
DIN EN 2407 |
(DRAFT) Aerospace series - Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3), solution treated and precipitation treated - Sheet, strip and plate, 0,2 mm ≤ a ≤ 10 mm |
|
DIN EN 2413 |
Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2413:1995 |
|
DIN EN 2416 |
(DRAFT) Aerospace series - Heat resisting steel FE-PA91-HT, solution treated - Plates a > 3 mm; inactive for new design |
|
DIN EN 2417 |
(DRAFT) Aerospace series - Heat resisting steel FE-PA 93-HT, solution treated and precipitation treated, plates a > 3 mm - Inactive for new design |
|
DIN EN 2419 |
(DRAFT) Aerospace series - Aluminium alloy AL-P2024-T351 - Plate, 6 mm < a ≤ 80 mm |
|
DIN EN 2422 |
Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm < a ≤ 120 mm; German and English version EN 2422:2005 |
|
DIN EN 2424 |
Aerospace series - Marking of aerospace products; German version EN 2424:1995 |
|
DIN EN 2428 |
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 50 IRHD; German version EN 2428:1995 |
|
DIN EN 2429 |
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 60 IRHD; German version EN 2429:1995 |
|
DIN EN 2430 |
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 70 IRHD; German version EN 2430:1995 |
|
DIN EN 2431 |
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 80 IRHD; German version EN 2431:1995 |
|
DIN EN 2432 |
Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 90 IRHD; German version EN 2432:1995 |
|
DIN EN 2435-001 |
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 001: Minimum requirements; German and English version EN 2435-001:2006 |
|
DIN EN 2435-002 |
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 002: High corrosion resistance; German and English version EN 2435-002:2006 |
|
DIN EN 2435-003 |
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003: High corrosion and fluid resistance; German and English version EN 2435-003:2006 |
|
DIN EN 2435-004 |
Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance; German and English version EN 2435-004:2006 |
|
DIN EN 2436-001 |
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 001: Basic requirements; German and English version EN 2436-001:2006 |
|
DIN EN 2436-002 |
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 002: High corrosion resistance; German and English version EN 2436-002:2006 |
|
DIN EN 2436-003 |
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 003: High corrosion and fluid resistance; German and English version EN 2436-003:2006 |
|
DIN EN 2436-004 |
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance; German and English version EN 2436-004:2006 |
|
DIN EN 2436-005 |
Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 005: For exterior use with surface preparation tolerance; German and English version EN 2436-005:2006 |
|
DIN EN 2437 |
Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys; German and English version EN 2437:2001 |
|
DIN EN 2445 |
(DRAFT) Aerospace series - Steel FE-PL8201 (41NiCrMo2), air melted, hardened and tempered - Hand and die forgings De ≤ 45 mm, 900 MPa ≤ Rm ≤ 1100 MPa |
|
DIN EN 2469 |
Aerospace series - Steel FE-PA3901 (X1CrNi18-10) - Air melted - Softened - Wires - 0,4 mm = D = 12,5 mm - 450 MPa = Rm = 650 MPa; German and English version EN 2469:2007 |
|
DIN EN 2485 |
(DRAFT) Aerospace series - Aluminium alloy AL-P2214 - Forging stock |
|
DIN EN 2486 |
Aerospace series - Aluminium alloy AL-P2618A - Forging stock; German and English version EN 2486:2005 |
|
DIN EN 2489 |
Aerospace series - Fibre reinforced plastics - Determination of the action of test fluids; German version EN 2489:1995 |
|
DIN EN 2491 |
Aerospace series - Molybdenum disulphide dry lubricants - Coating methods; German version EN 2491:1997 |
|
DIN EN 2500-1 |
(DRAFT) Aerospace series - Instructions for the drafting and use of metallic material standards - Part 1: General requirements; inactive for new design |
|
DIN EN 2500-2 |
(DRAFT) Aerospace series - Instructions for the drafting and use of metallic material standards - Part 2: Specific requirements for aluminium, aluminium alloys and magnesium alloys; inactive for new design |
|
DIN EN 2500-3 |
(DRAFT) Aerospace series - Instructions for the drafting and use of metallic material standards - Part 3: Specific requirements for heat resisting alloys; Inactive for new design |
|
DIN EN 2500-5 |
(DRAFT) Aerospace series - Instructions for the drafting and use of metallic material standards - Part 5: Specific requirements for steel; Inactive for new design |
|
DIN EN 2500-6 |
(DRAFT) Aerospace series - Instructions for the drafting and use of metallic material standards - Part 6: Specific requirements for filler metals for brazing; inactive for new design |
|
DIN EN 2511 |
Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm < a ≤ 100 mm; German and English version EN 2511:2005 |
|
DIN EN 2512 |
(DRAFT) Aerospace series - Aluminium alloy AL-P7175-T7351 - Plate, 6 mm < a ≤ 100 mm |
|
DIN EN 2516 |
Aerospace series - Passivation of corrosion resistant steels and decontamination of nickel base alloys; German version EN 2516:1997 |
|
DIN EN 2535 |
(DRAFT) Aerospace series - Vacuum deposition of cadmium |
|
DIN EN 2540 |
(DRAFT) Aerospace series - Steel FE-PM3902 (X7CrNiAl17-7) air melted, solution treated and precipitation hardened - Sheet and strip, a ≤ 6 mm, 1240 MPa ≤ Rm ≤ 1450 MPa |
|
DIN EN 2545-1 |
Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 1: General requirements; German version EN 2545-1:1995 |
|
DIN EN 2545-2 |
Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 2: Remelting stock; German version EN 2545-2:1995 |
|
DIN EN 2545-3 |
Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 3: Pre-productions and production castings; German version EN 2545-3:1995 |
|
DIN EN 2546 |
Aerospace series - Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods - Dimensions; German and English version EN 2546:2006 |
|
DIN EN 2549 |
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2549:1995 |
|
DIN EN 2549 |
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 2549:2006 |
|
DIN EN 2550 |
(DRAFT) Aerospace series - Rivets, solid, 100° normal countersunk normal head, in aluminium 1050A, inch based series |
|
DIN EN 2550 |
Aerospace series; rivets, solid, 100° normal countersunk head, in aluminium 1050A, inch based series; german version EN 2550:1992 |
|
DIN EN 2551 |
Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series; german version EN 2551:1992 |
|
DIN EN 2552 |
(DRAFT) Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodised or chromated, inch based series |
|
DIN EN 2552 |
Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodised or chromated, inch based series; german version EN 2552:1992 |
|
DIN EN 2553 |
(DRAFT) Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in aluminium alloy 2017A, inch based series |
|
DIN EN 2553 |
Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series; german version EN 2553:1992 |
|
DIN EN 2555 |
(DRAFT) Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in aluminium alloy 5056A, inch based series |
|
DIN EN 2556 |
(DRAFT) Aerospace series - Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series |
|
DIN EN 2556 |
Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series; German version EN 2556:1992 |
|
DIN EN 2560 |
Aerospace series - Carbon fibre preimpregnates - Determmination of the resin flow; German version EN 2560:1998 |
|
DIN EN 2562 |
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; flexural test parallel to the fibre direction; German version EN 2562:1997 |
|
DIN EN 2565 |
(DRAFT) Aerospace series; preparation of carbon fibre reinforced resin panels for test purposes |
|
DIN EN 2566 |
(DRAFT) Aerospace series - Fluorocarbon rubber (FPM) - Hardness 70 IRHD |
|
DIN EN 2567 |
(DRAFT) Aerospace series - Fluorocarbon rubber (FPM) - Hardness 80 IRHD |
|
DIN EN 2568 |
(DRAFT) Aerospace series - Fluorocarbon rubber (FPM) - Hardness 90 IRHD |
|
DIN EN 2570 |
Aerospace series - Nickel-cadmium batteries - Technical specification; German version EN 2570:1996 |
|
DIN EN 2583 |
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718); classification: 1275 MPa (at ambient temperature)/650 °C; technical specification; German version EN 2583:1997 |
|
DIN EN 2588 |
Aerospace series - Bearings, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads; German and English version EN 2588:2006 |
|
DIN EN 2589 |
(DRAFT) Aerospace series - Steel - Sheet and strip, cold rolled; thickness 0,1 mm ≤ a ≤ 3 mm; dimensions |
|
DIN EN 2590 |
(DRAFT) Aerospace series; steel; sheets and plates, hot rolled; dimensions |
|
DIN EN 2591-100 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General; German and English version EN 2591-100:2005 |
|
DIN EN 2591-101 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 101: Visual examination; German version EN 2591-101:1994 |
|
DIN EN 2591-102 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 102: Examination of dimensions and mass; German version EN 2591-102:1996 |
|
DIN EN 2591-201 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 201: Contact resistance, low level; German version EN 2591-201:1996 |
|
DIN EN 2591-202 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 202: Contact resistance at rated current; German version EN 2591-202:1996 |
|
DIN EN 2591-204 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 204: Discontinuity of contacts in the microsecond range; German version EN 2591-204:1996 |
|
DIN EN 2591-205 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 205: Housing (shell) electrical continuity; German version EN 2591-205:1996 |
|
DIN EN 2591-206 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 206: Measurement of insulation resistance; German version EN 2591-206:1996 |
|
DIN EN 2591-207 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 207: Voltage proof test; German version EN 2591-207:1996 |
|
DIN EN 2591-208 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 208: Temperature rise due to rated current; German version EN 2591-208:1996 |
|
DIN EN 2591-209 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 209: Current temperature derating; German version EN 2591-209:1996 |
|
DIN EN 2591-210 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 210: Electrical overload; German version EN 2591-210:1998 |
|
DIN EN 2591-211 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 211: Capacitance; German and English version EN 2591-211:2002 |
|
DIN EN 2591-213 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz; German version EN 2591-213:1997 |
|
DIN EN 2591-216 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 216: Engagement depth of contacts; German version EN 2591-216:1997 |
|
DIN EN 2591-218 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling; German and English version EN 2591-218:2002 |
|
DIN EN 2591-219 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 219: Voltage strength for insulated terminal lugs and in-line splices; German and English version EN 2591-219:2002 |
|
DIN EN 2591-220 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling; German and English version EN 2591-220:2005 |
|
DIN EN 2591-302 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 302: Climatic sequence; German version EN 2591-302:1997 |
|
DIN EN 2591-303 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 303: Cold/low pressure and damp heat; German version EN 2591-303:1997 |
|
DIN EN 2591-304 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 304: Damp heat steady state; German version EN 2591-304:1997 |
|
DIN EN 2591-305 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 305: Rapid change of temperature; German version EN 2591-305:1997 |
|
DIN EN 2591-306 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 306: Mould growth; German version EN 2591-306:1998 |
|
DIN EN 2591-307 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 307: Salt mist; German version EN 2591-307:1998 |
|
DIN EN 2591-308 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 308: Sand and dust; German version EN 2591-308:1998 |
|
DIN EN 2591-309 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 309: Dry heat; German version EN 2591-309:1997 |
|
DIN EN 2591-310 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 310: Cold; German version EN 2591-310:1998 |
|
DIN EN 2591-311 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 311: Low air pressure; German version EN 2591-311:1997 |
|
DIN EN 2591-312 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 312: Air leakage; German version EN 2591-312:1997 |
|
DIN EN 2591-313 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 313: Artificial rain; German version EN 2591-313:1997 |
|
DIN EN 2591-314 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 314: Immersion at low air pressure; German version EN 2591-314:1997 |
|
DIN EN 2591-315 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 315: Fluid resistance; German version EN 2591-315:1998 |
|
DIN EN 2591-316 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 316: Ozone resistance; German version EN 2591-316:1997 |
|
DIN EN 2591-317 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 317: Flammability; German version EN 2591-317:1998 |
|
DIN EN 2591-318 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 318: Fire-resistance; German version EN 2591-318:1998 |
|
DIN EN 2591-319 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 319: Gastightness of solderless wrapped connections; German version EN 2591-319:1997 |
|
DIN EN 2591-320 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 320: Simulated solar radiation at ground level; German version EN 2591-320:1997 |
|
DIN EN 2591-321 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 321: Damp heat, cyclic test; German version EN 2591-321:1997 |
|
DIN EN 2591-322 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 322: Hermeticity; German version EN 2591-322:1998 |
|
DIN EN 2591-324 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 324: Interfacial sealing; German version EN 2591-315:1998 |
|
DIN EN 2591-325 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 325: Ice resistance; German and English version EN 2591-325:2002 |
|
DIN EN 2591-402 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 402: Shock; German version EN 2591-402:1998 |
|
DIN EN 2591-403 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 403: Sinusoidal and random vibration; German version EN 2591-403:1998 |
|
DIN EN 2591-404 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 404: Transverse load; German version EN 2591-404:1998 |
|
DIN EN 2591-405 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 405: Axial load; German version EN 2591-405:1998 |
|
DIN EN 2591-406 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 406: Mechanical endurance; German version EN 2591-406:1998 |
|
DIN EN 2591-407 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 407: Durability of contact retention system and seals; German version EN 2591-407:1999 |
|
DIN EN 2591-409 |
Aerospace series -Elements of electrical and optical connection; test methods - Part 409: Contact retention in insert; German version EN 2591-409:1999 |
|
DIN EN 2591-410 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 410: Insert retention in housing (axial); German version EN 2591-410:1998 |
|
DIN EN 2591-412 |
Aerospace series -Elements of electrical and optical connection; test methods - Part 412: Contact insertion and extraction forces; German version EN 2591-412:1999 |
|
DIN EN 2591-413 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 413: Holding force of grounding spring system; German version EN 2591-413:1998 |
|
DIN EN 2591-414 |
Aerospace series - Elements of electrical and optical connection; test methods - Part 414: Unmating of lanyard release connectors; German version EN 2591-414:1998 |
|
DIN EN 2591-415 |
Aerospace series - Elements of electrical and optical connections; Test methods - Part 415: Test probe damage (female contacts); German and English version EN 2591-415:2001 |
|
DIN EN 2591-416 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 416: Contact bending strength; German and English version EN 2591-416:2001 |
|
DIN EN 2591-417 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 417: Tensile strength (crimped connection); German and English version EN 2591-417:2001 |
|
DIN EN 2591-418 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 418: Gauge insertion/extraction forces (female contacts); German and English version EN 2591-418:2001 |
|
DIN EN 2591-419 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 419: Stability of male contacts in insert; German and English version EN 2591-419:2001 |
|
DIN EN 2591-420 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 420: Mechanical strength of rear accessories; German and English version EN 2591-420:2001 |
|
DIN EN 2591-421 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 421: Free fall; German and English version EN 2591-421:2002 |
|
DIN EN 2591-422 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 422: Locking wire hole strength; German and English version EN 2591-422:2002 |
|
DIN EN 2591-423 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 423: Connector rear accessories thread strength; German and English version EN 2591-423:2005 |
|
DIN EN 2591-424 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 424: Stripping force, solderless wrapped connections; German and English version EN 2591-424:2001 |
|
DIN EN 2591-425 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 425: Unwrapping capability, solderless wrapped connections; German and English version EN 2591-425:2001 |
|
DIN EN 2591-426 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 426: Contact retention system effectiveness; German and English version EN 2591-426:2001 |
|
DIN EN 2591-427 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 427: Robustness of protective cover attachment; German and English version EN 2591-427:2001 |
|
DIN EN 2591-428 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs; German and English version EN 2591-428:2002 |
|
DIN EN 2591-501 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 501: Soft solderability; German and English version EN 2591-501:2002 |
|
DIN EN 2591-502 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 502: Restricted entry; German and English version EN 2591-502:2001 |
|
DIN EN 2591-503 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 503: Contact deformation after crimping; German and English version EN 2591-503:2001 |
|
DIN EN 2591-505 |
Aeospace series - Elements of electrical and optical connection; Test methods - Part 505: Contact protection effectiveness (scoop-proof); German and English version EN 2591-505:2001 |
|
DIN EN 2591-506 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 506: Use of tools; German and English version EN 2591-506:2001 |
|
DIN EN 2591-507 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 507: Plating porosity; German and English version EN 2591-507:2002 |
|
DIN EN 2591-508 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 508: Measurement of thickness of coating on contacts; German and English version EN 2591-508:2001 |
|
DIN EN 2591-509 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 509: Adhesion of coating on contacts; German and English version EN 2591-509:2001 |
|
DIN EN 2591-512 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell; German and English version EN 2591-512:2002 |
|
DIN EN 2591-513 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 513: Magnetic permeability; German and English version EN 2591-513:2002 |
|
DIN EN 2591-514 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 514: Solderability of contacts with self-contained solder and flux; German and English version EN 2591-514:2002 |
|
DIN EN 2591-515 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 515: Hydrolytic stability; German and English version EN 2591-515:2005 |
|
DIN EN 2591-601 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 601: Optical elements; Insertion loss; German and English version EN 2591-601:2001 |
|
DIN EN 2591-602 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 602: 0ptical elements; Variation of attenuation and optical discontinuity; German and English version EN 2591-602:2001 |
|
DIN EN 2591-604 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 604: Optical elements; Cleaning capability of optical face; German and English version EN 2591-604:2001 |