|
DIN EN 2591-606 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 606: Optical elements; Crosstalk; German version EN 2591-606:2002 |
|
DIN EN 2591-607 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 607: Optical elements; Immunity to ambient light coupling; German version EN 2591-607:2002 |
|
DIN EN 2591-609 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing; German and English version EN 2591-609:2005 |
|
DIN EN 2591-610 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 610: Optical elements; Effectiveness of cable attachment; Cable pulling; German and English version EN 2591-610:2001 |
|
DIN EN 2591-6101 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6101: Optical elements; Visual examination; German and English version EN 2591-6101:2001 |
|
DIN EN 2591-611 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 611: Optical elements; Effectiveness of cable attachment; Cable torsion; German and English version EN 2591-611:2001 |
|
DIN EN 2591-612 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 612: Optical elements; Effectiveness of cable attachment; Cable axial compression; German and English version EN 2591-612:2002 |
|
DIN EN 2591-613 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 613: Optical elements; Impact test; German version EN 2591-613:2002 |
|
DIN EN 2591-614 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 614: Optical elements; Connector radial compression; German version EN 2591-614:2002 |
|
DIN EN 2591-615 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 615: Optical elements; Connection integrity at temperature; German and English version EN 2591-615:2001 |
|
DIN EN 2591-617 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 617: Optical elements; Temperature cycling; German version EN 2591-617:2002 |
|
DIN EN 2591-6301 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6301: Optical elements; Endurance at temperature; German and English version EN 2591-6301:2001 |
|
DIN EN 2591-6303 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6303: Optical elements; Cold/low pressure and damp heat; German and English version EN 2591-6303:2001 |
|
DIN EN 2591-6305 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6305: Optical elements; Rapid change of temperature; German and English version EN 2591-6305:2001 |
|
DIN EN 2591-6306 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6306: Optical elements; Mould growth; German and English version EN 2591-6306:2001 |
|
DIN EN 2591-6307 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6307: Optical elements; Salt mist; German and English version EN 2591-6307:2001 |
|
DIN EN 2591-6314 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6314: Optical elements; Immersion at low air pressure; German and English version EN 2591-6314:2001 |
|
DIN EN 2591-6315 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6315: Optical elements; Fluid resistance; German and English version EN 2591-6315:2001 |
|
DIN EN 2591-6316 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6316: Optical elements; Ozone resistance; German and English version EN 2591-6316:2001 |
|
DIN EN 2591-6317 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6317: Optical elements; Flammability; German and English version EN 2591-6317:2001 |
|
DIN EN 2591-6318 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6318: Optical elements; Fire resistance; German and English version EN 2591-6318:2001 |
|
DIN EN 2591-6321 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6321: Optical elements; Damp heat, cyclic test; German version EN 2591-6321:2002 |
|
DIN EN 2591-6323 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6323: Optical elements; Thermal shock (hermetically sealed devices); German version EN 2591-6323:2002 |
|
DIN EN 2591-6324 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6324: Optical elements; Interfacial sealing; German and English version EN 2591-6324:2001 |
|
DIN EN 2591-6401 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6401: Optical elements; Acceleration steady state; German and English version EN 2591-6401:2001 |
|
DIN EN 2591-6403 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6403: Optical elements; Vibrations; German and English version EN 2591-6403:2001 |
|
DIN EN 2591-6404 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6404: Optical elements; Transverse load; German and English version EN 2591-6404:2001 |
|
DIN EN 2591-6405 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6405: Optical elements; Axial load; German and English version EN 2591-6405:2001 |
|
DIN EN 2591-6406 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6406: Optical elements; Mechanical endurance; German and English version EN 2591-6406:2001 |
|
DIN EN 2591-6414 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6414: Optical elements; Unmating of lanyard release optical connection elements; German and English version EN 2591-6414:2001 |
|
DIN EN 2591-6415 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 6415: Optical elements; Test probe damage; German and English version EN 2591-6415:2001 |
|
DIN EN 2591-701 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 701: Electrical elements; Measurement of open circuit impedance of couplers; German and English version EN 2591-701:2001 |
|
DIN EN 2591-702 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 702: Electrical elements; Measurement of signal distortion of couplers; German and English version EN 2591-702:2001 |
|
DIN EN 2591-703 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 703: Electrical elements; Common mode rejection of couplers; German and English version EN 2591-703:2001 |
|
DIN EN 2591-704 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 704: Electrical elements; Measurement of turns ratio on a transformer used in a coupler; German and English version EN 2591-704:2001 |
|
DIN EN 2591-705 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 705: Electrical elements; Measurement of stub input impedance of couplers; German and English version EN 2591-705:2001 |
|
DIN EN 2591-706 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 706: Electrical elements; Transmission test; German and English version EN 2591-706:2001 |
|
DIN EN 2591-707 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 707: Electrical elements; Measurement of characteristic impedance of a bus or a stub terminator; German and English version EN 2591-707:2001 |
|
DIN EN 2591-708 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 708: Electrical elements; Measurement of surface transfer impedance of couplers; German and English version EN 2591-708:2001 |
|
DIN EN 2591-709 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 709: Electrical elements; Tensile strength of couplers; German and English version EN 2591-709:2001 |
|
DIN EN 2591-7301 |
Aeospace series - Elements of electrical and optical connection; Test methods - Part 7301: Electrical elements; Temperature endurance of couplers; German and English version EN 2591-7301:2001 |
|
DIN EN 2591-E4 |
(DRAFT) Aerospace series - Elements of electrical and optical connection; test methods - Part E4: Residual magnetism |
|
DIN EN 2596 |
Aerospace series - Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods - Dimensions; German and English version EN 2596:2006 |
|
DIN EN 2599 |
Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm ≤ a ≤ 3,2 mm; Dimensions; German version EN 2599:2001 |
|
DIN EN 2601 |
Aerospace series - Fork ends, adjustable - Technical specification; German version EN 2601:1996 |
|
DIN EN 2602 |
Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2602:2005 |
|
DIN EN 2603 |
Aerospace series - Port ends for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2603:2005 |
|
DIN EN 2604 |
Aerospace series - 8° 30' interface for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2604:2005 |
|
DIN EN 2605 |
Aerospace series - 24° interface for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2605:2005 |
|
DIN EN 2607 |
Aerospace series - O-rings for adaptors, threaded, with lockring - Survey; German and English version EN 2607:2005 |
|
DIN EN 2608 |
Aerospace series - Installation and removal requirements for 8°30' adaptors, threaded, with lockring; German and English version EN 2608:2005 |
|
DIN EN 2617 |
Aerospace series - Plates in titanium and titanium alloys, thickness 6 mm |
|
DIN EN 2622 |
Aerospace series - Circular tubes, for fluids in heat resisting alloys, diameter 3,2 mm≤D≤100 mm - Dimensions; German and English version EN 2622:2001 |
|
DIN EN 2630 |
Aerospace series; aluminium alloy AL-P7009-T74511; extruded bars and sections; a or D ≤ 125 mm, with peripheral coarse grain control; German version EN 2630:1993 |
|
DIN EN 2632 |
Aerospace series; aluminium alloy AL-P7075-T73511; extruded bars and sections; a or D ≤ 100 mm, with peripheral coarse grain control; German version EN 2632:1993 |
|
DIN EN 2633 |
Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections; 1,2 mm ≤ a or D ≤ 150 mm, with peripheral coarse grain control; German version EN 2633:1993 |
|
DIN EN 2636 |
Aerospace series; aluminium alloy AL-P6082-T6; extruded bars and sections; a or D ≤ 200 mm, with peripheral coarse grain control; German version EN 2636:1993 |
|
DIN EN 2642 |
(DRAFT) Aerospace series - Structural adhesive systems - Adhesive film; technical specification |
|
DIN EN 2644 |
Aerospace series - Rod assemblies for flight controls - Technical specification; German version EN 2644:1997 |
|
DIN EN 2645 |
Aerospace series - Lockrings for adaptors, threaded, with lockring - Dimensions; German and English version EN 2645:2005 |
|
DIN EN 2647 |
(DRAFT) Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C |
|
DIN EN 2647 |
Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2647:1995 |
|
DIN EN 2648 |
Aerospace series - Washers, concave, in alloy steel, cadmium plated; German version EN 2648:1995 |
|
DIN EN 2649 |
Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2649:1995 |
|
DIN EN 2650 |
Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C ; German version EN 2650:1996 |
|
DIN EN 2651 |
Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2651:1996 |
|
DIN EN 2652 |
Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2652:1997 |
|
DIN EN 2653 |
Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2653:1996 |
|
DIN EN 2654 |
Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2654:1996 |
|
DIN EN 2656 |
Aerospace series - Pipe coupling - Coupling end, welded; Geometric configuration; German version EN 2656:2001 |
|
DIN EN 2657 |
(DRAFT) Aerospace series - Heat resisting alloy CO-PH1402 - Consumable electrode remelted, solution treated, bar a or D ≤ 150 mm; Rm ≥ 860 MPa |
|
DIN EN 2659 |
(DRAFT) Aerospace series - Heat resisting alloy CO-PH1402 - Consumable electrode remelted, solution treated, forgings De ≤ 100 mm; Rm ≥ 860 MPa |
|
DIN EN 2661 |
(DRAFT) Aerospace series - Heat resisting alloy CO-PH1402 - Consumable electrode remelted, solution treated, sheet and strip a ≤ 3 mm; Rm ≥ 860 MPa |
|
DIN EN 2662 |
(DRAFT) Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) annealed - Sheet, strip and plate, 0,2 mm ≤ a ≤ 10 mm |
|
DIN EN 2663 |
(DRAFT) Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) solution treated - Sheet, strip and plate, 0,2 mm ≤ a ≤ 10 mm |
|
DIN EN 2665-001 |
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification; German version EN 2665-001:1999 |
|
DIN EN 2665-003 |
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals; product standard; German version EN 2665-003:1999 |
|
DIN EN 2665-004 |
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals; product standard; German version EN 2665-004:1999 |
|
DIN EN 2667-1 |
(DRAFT) Aerospace series - Non-metallic materials; foaming structural adhesives, test methods - Part 1: Tensile single-lap shear |
|
DIN EN 2667-2 |
(DRAFT) Aerospace series - Non-metallic materials; foaming structural adhesives, test methods - Part 2: Compressive tube shear |
|
DIN EN 2667-4 |
(DRAFT) Aerospace series - Non-metallic materials; foaming structural adhesive films, test methods - Part 4: Vertical slump |
|
DIN EN 2667-5 |
(DRAFT) Aerospace series - Non-metallic materials; foaming structural adhesive films, test methods - Part 5: Exothermicity |
|
DIN EN 2667-6 |
Aerospace series - Non-metallic materials; Foaming structural adhesives; Test methods - Part 6: Determination of water absorption; German and English version EN 2667-6:2001 |
|
DIN EN 2680 |
(DRAFT) Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C |
|
DIN EN 2680 |
Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated, metric series - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2680:2006 |
|
DIN EN 2681 |
Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings - a ≤ 150 mm; German and English version EN 2681:2004 |
|
DIN EN 2682 |
(DRAFT) Aerospace series - Aluminium alloy AL-P7010-T7452 - Hand and die forgings a ≤ 150 mm |
|
DIN EN 2683 |
(DRAFT) Aerospace series - Aluminium alloy AL-P7010-T7651 - Hand forgings a ≤ 150 mm |
|
DIN EN 2684 |
Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm < a ≤ 140 mm; German and English version EN 2684:2004 |
|
DIN EN 2686 |
(DRAFT) Aerospace series - Aluminium alloy AL-P7010-T7451 - Hand forgings a ≤ 150 mm |
|
DIN EN 2687 |
Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate - 6 mm < a ≤ 160 mm; German and English version EN 2687:2004 |
|
DIN EN 2688 |
(DRAFT) Aerospace series - Aluminium alloy AL-P7050-T74 - Die forgings a ≤ 150 mm |
|
DIN EN 2690 |
(DRAFT) Aerospace series - Aluminium alloy AL-P7050-T7452 - Hand forgings a ≤ 200 mm |
|
DIN EN 2693 |
Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm; German and English version EN 2693:2005 |
|
DIN EN 2694 |
Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2694:2005 |
|
DIN EN 2695 |
Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm; German and English version EN 2695:2005 |
|
DIN EN 2696 |
Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2696:2005 |
|
DIN EN 2702 |
Aerospace series - Aluminium alloy AL-P6061 - T6 or T62 - Drawn or extruded bar and section - a or D ≤ 200 mm; German and English version EN 2702:2005 |
|
DIN EN 2703 |
Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm ≤ a ≤ 6 mm; German and English version EN 2703:2005 |
|
DIN EN 2712-002 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 150 °C - Part 002: Screened and jacketed; general |
|
DIN EN 2712-003 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 150 °C - Part 003: Screened (spiral) and jacketed; ink jet printable; product standard |
|
DIN EN 2712-004 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 150 °C - Part 004: Screened (braided) and jacketed; ink jet printable; product standard |
|
DIN EN 2712-005 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 150 °C - Part 005: Screened (spiral) and jacketed; CO2 laser printable; product standard |
|
DIN EN 2712-006 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 150 °C - Part 006: Screened (braided) and jacketed; CO2 laser printable; product standard |
|
DIN EN 2712-007 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 150 °C - Part 007: Screened (spiral) and jacketed; UV laser printable; product standard |
|
DIN EN 2712-008 |
(DRAFT) Aerospace series - Cables, electrical, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 150 °C - Part 008: Screened (braided) and jacketed, UV laser printable; product standard |
|
DIN EN 2712-009 |
(DRAFT) Aerospace series - Cables, electrical, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 150 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable; product standard |
|
DIN EN 2712-010 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 150 °C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable; product standard |
|
DIN EN 2713-002 |
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 002: Screened and jacketed - General; German and English version EN 2713-002:2006 |
|
DIN EN 2713-003 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 003: Screened (spiral) and jacketed, ink jet printable; product standard |
|
DIN EN 2713-004 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 004: Screened (braided) and jacketed, ink jet printable; product standard |
|
DIN EN 2713-005 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 005: Screened (spiral) and jacketed, CO2 laser printable; product standard |
|
DIN EN 2713-007 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 007: Screened (spiral) and jacketed, UV laser printable; product standard |
|
DIN EN 2713-007 |
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 007: Screened (spiral) and jacketed, UV laser printable - Product standard; German and English version EN 2713-007:2005 |
|
DIN EN 2713-008 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: Screened (braided) and jacketed, UV laser printable; product standard |
|
DIN EN 2713-009 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable; product standard |
|
DIN EN 2713-010 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable; product standard |
|
DIN EN 2713-011 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose; operating temperatures between -55 °C and 200 °C - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable; product standard |
|
DIN EN 2714-002 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose; operating temperatures between -55 °C and 260 °C - Part 002: Screened and jacketed; general |
|
DIN EN 2714-002 |
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 002: Screened and jacketed - General; German and English version EN 2714-002:2005 |
|
DIN EN 2714-003 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 003: Screened (spiral) and jacketed, ink jet printable; product standard |
|
DIN EN 2714-004 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 004: Screened (braided) and jacketed, ink jet printable; product standard |
|
DIN EN 2714-005 |
(DRAFT) Aerospace series - Cables, electrical, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 005: Screened (spiral) and jacketed, CO2 laser printable; product standard |
|
DIN EN 2714-006 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 006: Screened (braided) and jacketed, CO2 laser printable; product standard |
|
DIN EN 2714-007 |
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 007: Screened (spiral) and jacketed, UV laser printable - Product standard; German and English version EN 2714-007:2005 |
|
DIN EN 2714-008 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 008: Screened (braided) and jacketed, UV laser printable; product standard |
|
DIN EN 2714-009 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable; product standard |
|
DIN EN 2714-010 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable; product standard |
|
DIN EN 2714-011 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 011: DM family; screened (spiral) and jacketed; UV laser printable; Product standard |
|
DIN EN 2714-011 |
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 011: DM family, screened (spiral) and jacketed, UV laser printable - Product standard; German and English version EN 2714-011:2005 |
|
DIN EN 2714-012 |
(DRAFT) Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 012: DM family; screened (braided) and jacketed; UV laser printable; Product standard |
|
DIN EN 2714-012 |
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 012: DM family, screened (braided) and jacketed, UV laser printable - Product standard; German and English version EN 2714-012:2005 |
|
DIN EN 2714-013 |
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 013: DR family, screened (spiral) and jacketed, UV laser printable - Product standard; German and English version EN 2714-013:2005 |
|
DIN EN 2715 |
(DRAFT) Aerospace series - Macrographic examination of aluminium and aluminium alloy wrought products, forging stock and forgings |
|
DIN EN 2716 |
(DRAFT) Aerospace series - Test method - Determination of susceptibility to intergranular corrosion; wrought aluminium alloy products AL-P2XXX-series, AL-P7XXX-series and aluminium-lithium alloys |
|
DIN EN 2717 |
(DRAFT) Aerospace series - Test methods - Determination of susceptibility to intergranular corrosion; wrought aluminium alloy products AL-P5XXX-series with a magnesium content ≥3,5 % |
|
DIN EN 2718 |
(DRAFT) Aerospace series - Aluminium and aluminium alloys - Test method; Measurement of circumferential residual stress in circular tubes with a ratio ≥ 10 |
|
DIN EN 2719 |
(DRAFT) Aerospace series - Polycarbonate sheet - Technical specification |
|
DIN EN 2726 |
(DRAFT) Aerospace series - Aluminium alloy AL-C42201-T6 -Sand casting, a ≤ 20 mm |
|
DIN EN 2728 |
(DRAFT) Aerospace series - Aluminium alloy Al-C42101-T6 - Sand casting, a ≤ 20 mm |
|
DIN EN 2731 |
Aerospace series - Magnesium alloy MG-C46001-T6 - Sand casting; German and English version EN 2731:2005 |
|
DIN EN 2732 |
Aerospace series - Magnesium alloy MG-C46001-T6 - Chill casting; German and English version EN 2732:2005 |
|
DIN EN 2746 |
Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998 |
|
DIN EN 2747 |
Aerospace series - Glass fibre reinforced plastics - Tensile test; German version EN 2747:1998 |
|
DIN EN 2753 |
Aerospace series - Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2753:1996 |
|
DIN EN 2756 |
(DRAFT) Aerospace series - Lamps, incandescent - Tests |
|
DIN EN 2772 |
(DRAFT) Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4), air melted, solution treated and precipitation treated - Forgings, a or D ≤ 200 mm, Rm ≥ 965 MPa; Inactive for new design |
|
DIN EN 2775 |
(DRAFT) Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4), consumable electrode remelted, solution treated and precipitation treated - Forgings, a or D ≤ 200 mm, Rm ≥ 1310 MPa; Inactive for new design |
|
DIN EN 2781 |
Aerospace series - Non-metallic materials; structural adhesives - Test methods; determination of the primer thickness; German version EN 2781:1998 |
|
DIN EN 2786 |
(DRAFT) Aerospace series; electrolytic silver plating of fasteners |
|
DIN EN 2794-001 |
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification; German version EN 2794-001:1999 |
|
DIN EN 2794-003 |
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals; product standard; German version EN 2794-003:1999 |
|
DIN EN 2794-004 |
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals; product standard; German version EN 2794-004:1999 |
|
DIN EN 2795 |
(DRAFT) Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 50 IRHD |
|
DIN EN 2796 |
(DRAFT) Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 60 IRHD |
|
DIN EN 2797 |
(DRAFT) Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 70 IRHD |
|
DIN EN 2798 |
(DRAFT) Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 80 IRHD |
|
DIN EN 2799 |
(DRAFT) Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 90 IRHD |
|
DIN EN 2802 |
Aerospace series - Aluminium alloy AL-P7475-T761 - Sheet and strip - 0,6 mm ≤ a ≤ 6 mm; German and English version EN 2802:2005 |
|
DIN EN 2804 |
(DRAFT) Aerospace series - Aluminium alloy AL-P7075-T7651 - Plate, 6 mm < a ≤ 25 mm |
|
DIN EN 2805 |
(DRAFT) Aerospace series - Aluminium alloy AL-P7475-T7651 - Plate, 6 mm < a ≤ 40 mm |
|
DIN EN 2808 |
Aerospace series - Anodizing of titanium and titanium alloys; German version EN 2808:1997 |
|
DIN EN 2809 |
Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2809:2001 |
|
DIN EN 2810 |
Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2810:2001 |
|
DIN EN 2812 |
(DRAFT) Aerospace series - Stripping of electric cables |
|
DIN EN 2813 |
(DRAFT) Aerospace series - Aluminium alloy AL-P6061-T6 - Drawn tube for pressure applications 0,6 mm ≤ a ≤ 12,5 mm |
|
DIN EN 2816 |
(DRAFT) Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5), consumable electrode remelted, solution treated and precipitation treated - Forgings a or D ≤ 200 mm, Rm ≥ 965 MPa |
|
DIN EN 2818 |
(DRAFT) Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5), consumable electrode remelted, solution treated and precipitation treated - Forgings a or D ≤ 200 mm, Rm ≥ 1070 MPa |
|
DIN EN 2824 |
(DRAFT) Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials; test equipment, apparatus and media |
|
DIN EN 2825 |
(DRAFT) Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density |
|
DIN EN 2826 |
(DRAFT) Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke |
|
DIN EN 2829 |
Aerospace series - Adhesion test for metallic coatings by shot peening; German version EN 2829:1994 |
|
DIN EN 2833-1 |
(DRAFT) Aerospace series - Glass fibre thermosetting preimpregnates; technical specification - Part 1: General requirements |
|
DIN EN 2833-2 |
(DRAFT) Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 2: Glass fabric/Epoxy resin preimpregnates curing at up to 125 °C for continous use up to 80 °C |
|
DIN EN 2833-3 |
(DRAFT) Aerospace series - Glass fibre thermosetting preimpregnates; technical specification - Part 3: Glass fabric/epoxy resin preimpregnates curing at up to 180 °C for continous use up to 120 °C |
|
DIN EN 2833-4 |
(DRAFT) Aerospace series - Glass fibre thermosetting preimpregnates; technical specification - Part 4: Unidirectional glass/epoxy resin preimpregnate curing at up to 125 °C for continuous use up to 80 °C |
|
DIN EN 2853 |
Aerospace series - Current ratings for electrical cables with conductor EN 2083; German and English version EN 2853:2005 |
|
DIN EN 2854-002 |
(DRAFT) Aerospace series - Cables, electrical, for general purposes - Cross sections equal to and greater than 9 mm2; operating temperatures between -55 °C and 260 °C - Part 002: General |
|
DIN EN 2854-003 |
(DRAFT) Aerospace series - Cables, electrical for general purpose; cross sections equal to and greater than 9 mm2; operating temperatures between -55 °C and 260 °C - Part 003: Product standard |
|
DIN EN 2856 |
Aerospace series - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore - Classification: 1100 MPa/235 °C; German and English version EN 2856:2006 |
|
DIN EN 2858-1 |
Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 1: general requirements; German version EN 2858-1:1994 |
|
DIN EN 2858-2 |
Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 2: forging stock; German version EN 2858-2:1994 |
|
DIN EN 2858-3 |
Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 3: pre-production and production forgings; German version EN 2858-3:1994 |
|
DIN EN 2859 |
(DRAFT) Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C |
|
DIN EN 2859 |
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2859:1995 |
|
DIN EN 2860-1 |
(DRAFT) Aerospace series; heat resisting alloys; forging stock and forgings; technical specification; part 1: general requirements |
|
DIN EN 2860-2 |
(DRAFT) Aerospace series; heat resisting alloys; forging stock and forgings; technical specification; part 2: forging stock |
|
DIN EN 2860-3 |
(DRAFT) Aerospace series; heat resisting alloys; forging stock and forgings; technical specification; part 3: pre-production and production forgings |
|
DIN EN 2862 |
(DRAFT) Aerospace series; nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated; classification: 1100 MPa (at ambient temperature)/235 °C |
|
DIN EN 2863 |
(DRAFT) Aerospace series; nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in heat resisting steel, MoS2 lubricated; classification: 1100 MPa (at ambient temperature)/315 °C |
|
DIN EN 2865 |
(DRAFT) Aerospace series; nuts, anchor, self-locking, floating, two lug, with counterbore, in heat resisting steel, MoS2 lubricated; classification: 1100 MPa (at ambient temperature)/315 °C |
|
DIN EN 2866 |
(DRAFT) Aerospace series; nuts, anchor, self-locking, floating, one lug, with counterbore, in steel, cadmium plated, MoS2 lubricated; classification: 1100 MPa (at ambient temperature)/235 °C |
|
DIN EN 2867 |
(DRAFT) Aerospace series; nuts, anchor, self-locking, floating, one lug, with counterbore, in heat resisting steel, MoS2 lubricated; classification: 1100 MPa (at ambient temperature)/315 °C |
|
DIN EN 2868 |
(DRAFT) Aerospace series; nuts, hexagonal, slotted/castellated; normal height, normal across flats, in heat resisting steel, silver plated; classification: 1100 MPa (at ambient temperature)/650 °C |
|
DIN EN 2869 |
(DRAFT) Aerospace series; nuts, hexagonal, slotted/castellated; normal height, normal across flats, in heat resisting steel, silver passivated; classification: 1100 MPa (at ambient temperature)/650 °C |
|
DIN EN 2870 |
Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2870:1996 |
|
DIN EN 2874 |
Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315 °C; German version EN 2874:1996 |
|
DIN EN 2876 |
(DRAFT) Aerospace series - Nuts, hexagon, plain, reduced height, normal across flats, in aluminium alloy, anodized - Classification: 450 MPa (at ambient temperature)/120 °C |
|
DIN EN 2878 |
(DRAFT) Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C |
|
DIN EN 2879 |
(DRAFT) Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C |
|
DIN EN 2880 |
(DRAFT) Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/120 °C |
|
DIN EN 2881 |
(DRAFT) Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/120 °C |
|
DIN EN 2881 |
Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated, metric series - Classification: 900 MPa (at ambient temperature)/120 °C; German and English version EN 2881:2006 |
|
DIN EN 2884 |
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2884:1996 |
|
DIN EN 2885 |
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated, classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2885:1996 |
|
DIN EN 2886 |
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa/235 °C; German version EN 2886:1996 |
|
DIN EN 2887 |
Aerospace series - bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2887:1995 |
|
DIN EN 2888 |
(DRAFT) Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C |
|
DIN EN 2888 |
Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2888:1995 |
|
DIN EN 2889 |
(DRAFT) Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C |
|
DIN EN 2889 |
Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2889:1995 |
|
DIN EN 2894 |
(DRAFT) Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting nickel base alloy, passivated, MoS2 lubricated; classification: 1550 MPa (at ambient temperature)/315 °C |
|
DIN EN 2895 |
(DRAFT) Aerospace series; nuts, hexagonal, plain, normal height, normal across flats, in corrosion resisting steel, passivated; classification: 900 MPa (at ambient temperature)/425 °C |
|
DIN EN 2897 |
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa/235 °C; German version EN 2897:1996 |
|
DIN EN 2906 |
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2906:1994 |
|
DIN EN 2907 |
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2907:1995 |
|
DIN EN 2908 |
Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C; German version EN 2908:1994 |
|
DIN EN 2914 |
Aerospace series - Washers, flat, large diameter, in heat resisting steel, passivated; German version EN 2914:1996 |
|
DIN EN 2923 |
(DRAFT) Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated - Classification: 600 MPa (at ambient temperature)/425 °C |
|
DIN EN 2924 |
(DRAFT) Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated, left hand thread; classification: 600 MPa (at ambient temperature)/425 °C |
|
DIN EN 2932 |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2932:1996 |
|
DIN EN 2933 |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2933:1996 |
|
DIN EN 2934 |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2934:1996 |
|
DIN EN 2935 |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2935:1996 |
|
DIN EN 2936 |
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa (at ambient temperature)/730 °C; German version EN 2936:1996 |
|
DIN EN 2937 |
Aerospace series - Screws, hexagon-head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2937:1994 |
|
DIN EN 2938 |
Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2938:1995 |
|
DIN EN 2939 |
Aerospace series - Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2939:1994 |
|
DIN EN 2940 |
Aerospace series - Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2940:1995 |
|
DIN EN 2942 |
Aerospace series - Insert, screw thread, helical coil, self-locking, in head resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated; German version EN 2942:1998 |
|
DIN EN 2943 |
Aerospace series - Inserts, screw thread, helical coil, self-locking - Technical specification; German version EN 2943:1998 |
|
DIN EN 2944 |
Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting alloy FE-PA3004; German version EN 2944:1998 |
|
DIN EN 2945 |
Aerospace series - Inserts, screw thread, helical coil, self-locking - Assembly procedure; German version EN 2945:1998 |
|
DIN EN 2947 |
Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated - Cold drawn wire - a or D = 2,3 mm; German and English version EN 2947:2006 |
|
DIN EN 2948 |
Aerospace series - Washers, tab, in heat resisting steel, passivated; German version EN 2948:1996 |
|
DIN EN 2949 |
Aerospace series - Washers, wire locking, in corrosion resisting steel - passivated; German version EN 2949:1996 |
|
DIN EN 2955 |
Aerospace series; recycling of titanium and titanium alloy scrap; German version EN 2955:1993 |
|
DIN EN 2955/A1 |
Aerospace series - Recycling of titanium and titanium alloy scrap; German version EN 2955:1993/AC:1995 |
|
DIN EN 2960 |
(DRAFT) Aerospace series; heat resisting nickel base alloy (Ni-P101 HT); cold worked and solution treated; bar for machining for fasteners 3 ≤ D ≤ 50 mm |
|
DIN EN 2961 |
(DRAFT) Aerospace series - Heat resisting alloy NI-PH2601, solution treated; bar for machined fasteners D ≤ 50 mm, Rm ≥ 1270 MPa |
|
DIN EN 2962 |
(DRAFT) Aerospace series - Carbon fibre filament yarn (Polyacrylonitrile precursor) - Technical specification |
|
DIN EN 2985 |
Aerospace series - Nickel-cadmium batteries of format A type; German version EN 2985:1996 |
|
DIN EN 2986 |
Aerospace series - Nickel-cadmium batteries - Of format B type; German version EN 2986:1996 |
|
DIN EN 2987 |
Aerospace series - Nickel-cadmium batteries of format C type; German version EN 2987:1996 |
|
DIN EN 2988 |
Aerospace series - Nickel-cadmium batteries of format D type; German version EN 2988:1996 |
|
DIN EN 2991 |
Aerospace series - Nickel-cadmium batteries - Of format E type; German version EN 2991:1996 |
|
DIN EN 2993 |
Aerospace series - Nickel-cadmium batteries - Of format F type; German version EN 2993:1996 |
|
DIN EN 2995-001 |
(DRAFT) Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification |
|
DIN EN 2995-005 |
(DRAFT) Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 005: With polarized signal contact and unified mounting hardware, centre-to-centre distance 18 mm; product standard |
|
DIN EN 2996-001 |
(DRAFT) Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification |
|
DIN EN 2996-004 |
(DRAFT) Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 004: With signal contact and unified mounting hardware, centre-to-centre distance of terminals 12,8 mm; product standard |
|
DIN EN 2996-005 |
(DRAFT) Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 005: With polarized signal contact and unified mounting hardware, centre-to-centre distance of terminals 12,8 mm; product standard |
|
DIN EN 2997-1 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 1: Technical specification; German version EN 2997-1:1997 |
|
DIN EN 2997-10 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 10: Protective cover for plug, product standard; German version EN 2997-10:1997 |
|
DIN EN 2997-11 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 11: Dummy receptacle; product standard; German version EN 2997-11:1997 |
|
DIN EN 2997-2 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 2: Specification of performance and contact arrangements; German version EN 2997-2:1997 |
|
DIN EN 2997-3 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 3: Square flange receptacle; product standard; German version EN 2997-3:1997 |
|
DIN EN 2997-4 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 4: Jam-nut mounted receptacle; product standard; German version EN 2997-4:1997 |
|
DIN EN 2997-5 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 5: Hermetic, square flange receptacle; product standard; German version EN 2997-5:1997 |
|
DIN EN 2997-6 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 6: Hermetic jam-nut mounted receptacle; product standard; German version EN 2997-6:1997 |
|
DIN EN 2997-7 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 7: Hermetic receptacle with round flange attached by soldering or brazing; product standard; German version EN 2997-7:1997 |
|
DIN EN 2997-8 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 8: Plug; product standard; German version EN 2997-8:1997 |
|
DIN EN 2997-9 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 9: Protective cover for receptacle; product standard; German version EN 2997-9:1997 |
|
DIN EN 2998 |
Aerospace series - Washers, flat, in heat resisting steel, passivated; German version EN 2998:1996 |
|
DIN EN 3001 |
(DRAFT) Aerospace series; tempered float glass plies for aircraft applications; technical specification |
|
DIN EN 3004 |
Aerospace series - Nuts, self-locking, MJ theads, in heat resisting steel FE-PA2601 (A286); classification: 1100 MPa (at ambient temperature)/650 °C; technical specification; German version EN 3004:1997 |
|
DIN EN 3005 |
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated - Classification: 1210 MPa (at ambient temperature)/730 °C - Technical specification; German and English version EN 3005:2004 |
|
DIN EN 3006 |
Aerospace series - Screws, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3006:1994 |
|
DIN EN 3007 |
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3007:1996 |
|
DIN EN 3008 |
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa/650 °C; German version EN 3008:1998 |
|
DIN EN 3009 |
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa/650 °C, silver plated; German version EN 3009:1998 |
|
DIN EN 3010 |
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification 1210 MPa/730 °C; German version EN 3010:1998 |
|
DIN EN 3011 |
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa/730 °C; German version EN 3011:1998 |
|
DIN EN 3012 |
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy); classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3012:1995 |
|
DIN EN 3014 |
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification 1100 MPa (at ambient temperature)/650 °C; German version EN 3014:2001 |
|
DIN EN 3015 |
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification 1100 MPa (at ambient temperature)/650 °C; German version EN 3015:2001 |
|
DIN EN 3026 |
Aerospace series; test method for dry film lubricants; corrosion test on steels specimens; German version EN 3026:1994 |
|
DIN EN 3027 |
Aerospace series; test method for dry film lubricants; salt spray test; German version EN 3027:1994 |
|
DIN EN 3030 |
Aerospace series; test method for dry film lubricants; solids content; German version EN 3030:1994 |
|
DIN EN 3032 |
Aerospace series; test method for dry film lubricants; thickness measurement; German version EN 3032:1994 |
|
DIN EN 3035 |
Aerospace series - 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa(at ambient temperature)/235 °C; German version EN 3035:1996 |
|
DIN EN 3037 |
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized MoS2 lubricated - Classification: 1100 MPa(at ambient temperature)/315 °C; German version EN 3037:1996 |
|
DIN EN 3042 |
(DRAFT) Aerospace series - Quality assurance - EN aerospace products; qualification procedure |
|
DIN EN 3045 |
Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3045:1993 |
|
DIN EN 3046 |
Aerospace series; bearings, airframe rolling; rigid single row ball bearings in steel, cadmium plated; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3046:1993 |
|
DIN EN 3047 |
Aerospace series; bearings, airframe rolling; rigid single row ball bearings in corrosion resisting steel; diameter series 0 and 2; reduced clearance category; dimensions and loads; German version EN 3047:1993 |
|
DIN EN 3050 |
Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification; German version EN 3050:1998 |
|
DIN EN 3052 |
(DRAFT) Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C |
|
DIN EN 3052 |
Aerospace series; bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 °C (includes amendment A1:1993); German version EN 3052:1993 + A1:1993 |
|
DIN EN 3053 |
Aerospace series; bearings; airframe rolling, single row self-aligning roller bearings in steel; dimensions and loads; German version EN 3053:1994 |
|
DIN EN 3054 |
Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in steel, cadmium plated; dimensions and loads; German version EN 3054:1994 |
|
DIN EN 3055 |
Aerospace series; bearings; airframe rolling; single row self-aligning roller bearings in corrosion resisting steel; dimensions and loads; German version EN 3055:1994 |
|
DIN EN 3056 |
Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel; dimensions and loads; German version EN 3056:1994 |
|
DIN EN 3057 |
Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel, cadmium plated; dimensions and loads; German version EN 3057:1994 |
|
DIN EN 3058 |
Aerospace series; bearings, airframe rolling; rigid double row ball bearings in corrosion resisting steel; dimensions and loads; German version EN 3058:1994 |
|
DIN EN 3059 |
(DRAFT) Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, with flanged alignment bush, cadmium plated - Dimensions and loads |
|
DIN EN 3060 |
(DRAFT) Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated, with flanged alignment bush, cadmium plated - Dimensions and loads |
|
DIN EN 3061 |
(DRAFT) Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with flanged alignment bush - Dimensions and loads |
|
DIN EN 3063 |
Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 3063:1994 |
|
DIN EN 3064 |
Aerospace series - Shank nuts, self-locking, serrated - Installation procedure; German version EN 3064:1996 |