|
DIN EN 936 |
Chemicals used for treatment of water intended for human consumption - Carbon dioxide |
|
DIN EN ISO 10438-1 |
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2003); English version EN ISO 10438-1:2003 |
|
DIN EN ISO 10439 |
Petroleum, chemical and lgas service industries - Centrifugal compressors (ISO 10439:2002); German and English version EN ISO 10439:2002 |
|
DIN EN ISO 11960 |
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2004); English version EN ISO 11960:2004 |
|
DIN EN ISO 12944-2 |
Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:1998) |
|
DIN EN ISO 12944-7 |
Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:1998) |
|
DIN EN ISO 13534 |
Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000); English version of DIN EN ISO 13534 |
|
DIN EN ISO 13628-10 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2005); English version EN ISO 13628-10:2006 |
|
DIN EN ISO 13628-8 |
(DRAFT) Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems (ISO 13628-8:2002 + Cor. 1:2005); English version prEN ISO 13628-8:2006 |
|
DIN EN ISO 13628-9 |
(DRAFT) Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tool (ROT) intervention systems (ISO 13628-9:2000); English version prEN ISO 13628-9:2006 |
|
DIN EN ISO 13679 |
Petroleum and natural gas industries - Procedures for testing casing and tubing connections (ISO 13679:2002); English version EN ISO 13679:2006 |
|
DIN EN ISO 14692-1 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2002); English version EN ISO 14692-1:2002 |
|
DIN EN ISO 14723 |
Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001); German and english version EN ISO 14723:2001 |
|
DIN EN ISO 15156-3 |
Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2003); English version EN ISO 15156-3:2003 |
|
DIN EN ISO 1518 |
Paints and varnishes - Scratch test (ISO 1518:1992); English version of DIN EN ISO 1518 |
|
DIN EN ISO 19901-4 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2003); English version EN ISO 19901-4:2003 |
|
DIN EN ISO 19903 |
Petroleum and natural gas industries - Fixed concrete offshore structures (ISO 19903:2006); English version EN ISO 19903:2006 |
|
DIN EN ISO 20846 |
Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2004) |
|
DIN EN ISO 2114 |
Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000) |
|
DIN EN ISO 2114 Berichtigung 1 |
Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000); Corrigendum 1 to English version of DIN EN ISO 2114:2002-06 |
|
DIN EN ISO 2719 |
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2002) |
|
DIN EN ISO 3251 |
Paints, varnishes and plastics - Determination of non-volatile matter content (ISO 3251:2003) |
|
DIN EN ISO 4142 |
Laboratory glassware - Test tubes (ISO 4142:2002) |
|
DIN EN ISO 4259 |
Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006) |
|
DIN EN ISO 4628-7 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2003) |
|
DIN EN ISO 4628-8 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe (ISO 4628-8:2005) |
|
DIN EN ISO 6270-1 |
Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation (ISO 6270-1:1998); English version of DIN EN ISO 6270-1 |
|
DIN EN ISO 6270-2 |
Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (ISO 6270-2:2005) |
|
DIN EN ISO 6743-4 |
Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999) |
|
DIN EN ISO 7783-2 |
Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999) |
|
DIN ISO 15228 |
Textile machinery and accessories - Profile reeds for air jet weaving machines - Dimensions (ISO 15228:2005) |
|
DIN ISO 276 |
Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2002) |
|
DIN 51405 |
General principles governing the gas chromatographic analysis of petroleum products and related liquids and solvents used in paints an varnishes |
|
DIN 51412-1 |
Testing of petroleum products - Determination of electrical conductivity - Part 1: Laboratory method |
|
DIN 51425 |
Testing of mineral oil hydrocarbons and similar materials - Analysis by high pressure liquid chromatography - General working principles |
|
DIN 51431-2 |
Determination of magnesium content of lubricants by wavelength dispersive X-ray fluorescence spectrometry |
|
DIN 51719 |
Determination of ash in solid mineral fuels |
|
DIN 51810 |
Determination of apparent viscosity of lubricating greases using the cone and plate viscometer |
|
DIN CEN/TS 14175-5 |
Fume cupboards - Part 5: Recommendations for installation and maintenance; English version CEN/TS 14175-5:2006 |
|
DIN EN 1014-1 |
Wood preservatives - Sampling and analysis of creosote and creosoted timber - Procedure for sampling creosote |
|
DIN EN 1014-2 |
Wood preservatives - Sampling and analysis of creosote and creosoted timber - Procedure for sampling creosote |
|
DIN EN 1014-3 |
Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of the benzoAeaUepyrene content of creosote |
|
DIN EN 1014-4 |
Methods of sampling and analysis for creosote and creosoted timber - Determination of the water-extractable phenols content of creosote |
|
DIN EN 1018 |
Chemicals used for treatment of water intended for human consumption - Calcium carbonate |
|
DIN EN 1019 |
Chemicals used for treatment of water intended for human consumption - Sulfur dioxide |
|
DIN EN 10300 |
Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
|
DIN EN 10301 |
Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
|
DIN EN 1040 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1) |
|
DIN EN 1127-2 |
Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
|
DIN EN 113 |
Wood preservatives - Test method for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values |
|
DIN EN 113/A1 |
Wood preservatives - Test method for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values |
|
DIN EN 116 |
Diesel and domestic heating fuels - Determination of cold filter plugging point |
|
DIN EN 1160 |
Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas |
|
DIN EN 117 |
Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) |
|
DIN EN 118 |
Wood preservatives - Determination of preventive action against Reticulitermes species (European termites) (Laboratory method) |
|
DIN EN 1197 |
Chemicals used for treatment of water intended for human consumption - Monozinc phosphate solution |
|
DIN EN 1198 |
Chemicals used for treatment of water intended for human consumption - Sodium dihydrogen orthophosphate |
|
DIN EN 1199 |
Chemicals used for treatment of water intended for human consumption - Disodium hydrogen orthophosphate |
|
DIN EN 1200 |
Chemicals used for treatment of water intended for human consumption - Trisodium orthophosphate |
|
DIN EN 1201 |
Chemicals used for treatment of water intended for human consumption - Potassium dihydrogen orthophosphate |
|
DIN EN 1202 |
Chemicals used for treatment of water intended for human consumption - Dipotassium hydrogen orthophosphate |
|
DIN EN 1203 |
Chemicals used for treatment of water intended for human consumption - Tripotassium orthophosphate |
|
DIN EN 1204 |
Chemicals used for treatment of water intended for human consumption - Calcium tetrahydrogen bis(orthophosphate) |
|
DIN EN 1205 |
Chemicals used for treatment of water intended for human consumption - Disodium dihydrogen pyrophosphate |
|
DIN EN 1206 |
Chemicals used for treatment of water intended for human consumption - Tetrasodium pyrophosphate |
|
DIN EN 12065 |
Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires |
|
DIN EN 12066 |
Installations and equipment for liquefied natural gas - Testing of insulating linings for liquefied natural gas impounding areas |
|
DIN EN 1208 |
Chemicals used for treatment of water intended for human consumption - Sodium calcium polyphosphate |
|
DIN EN 12081 |
Railway applications - Axleboxes - Lubricating greases |
|
DIN EN 1209 |
Chemicals used for treatment of water intended for human consumption - Sodium silicate |
|
DIN EN 1210 |
Chemicals used for treatment of water intended for human consumption - Sodium tripolyphosphate |
|
DIN EN 1212 |
Chemicals used for treatment of water intended for human consumption - Sodium polyphosphate |
|
DIN EN 12120 |
Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite |
|
DIN EN 12121 |
Chemicals used for treatment of water intended for human consumption - Sodium disulfite |
|
DIN EN 12123 |
Chemicals used for treatment of water intended for human consumption - Ammonium sulfate |
|
DIN EN 12124 |
Chemicals used for treatment of water intended for human consumption - Sodium sulfite |
|
DIN EN 12125 |
Chemicals used for treatment of water intended for human consumption - Sodium thiosulfate |
|
DIN EN 12126 |
Chemicals used for treatment of water intended for human consumption - Liquefied ammonia |
|
DIN EN 12139 |
Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC |
|
DIN EN 12173 |
Chemicals used for treatment of water intended for human consumption - Sodium fluoride |
|
DIN EN 12174 |
Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate |
|
DIN EN 12175 |
Chemicals used for treatment of water intended for human consumption - Hexafluorosilicic acid |
|
DIN EN 12177 |
Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography |
|
DIN EN 12177 Berichtigung 1 |
Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography; German version EN 12177:1998, Corrigenda to DIN EN 12177:1998-08 |
|
DIN EN 12186 |
Gas supply systems - Gas pressure regulating stations for transmission and distribution - Functional requirements |
|
DIN EN 12206-1 |
Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
|
DIN EN 12215 |
Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
|
DIN EN 12308 |
Installations and equipment for liquefied natural gas - Suitability testing of gaskets designed for flanged joints used on LNG piping |
|
DIN EN 12321 |
Underground mining machinery - Specification for the safety requirements for armoured face conveyors |
|
DIN EN 12353 |
Chemical disinfectants and antiseptics - Preservation of microbial strains used for the determination of bactericidal and fungicidal activity |
|
DIN EN 12353 |
Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal, mycobactericidal, sporicidal and fungicidal activity |
|
DIN EN 12370 |
Natural stone test methods - Determination of resistance to salt crystallization |
|
DIN EN 12371 |
Natural stone test methods - Determination of frost resistance; English version of DIN EN 12371 |
|
DIN EN 12372 |
Natural stone test methods - Determination of flexural strength under concentrated load |
|
DIN EN 12372 |
Natural stone test methods - Determination of flexural strength under concentrated load |
|
DIN EN 12386 |
Chemicals used for treatment of water intended for human consumption - Copper sulfate |
|
DIN EN 12458 |
Surface active agents - Determination of stability in hard water |
|
DIN EN 12485 |
Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime and half-burnt dolomite - Test methods; English version of DIN EN 12485 |
|
DIN EN 12490 |
Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood |
|
DIN EN 12518 |
Chemicals used for treatment of water intended for human consumption - High-calcium lime; English version of DIN EN 12518 |
|
DIN EN 12547 |
Centrifuges - Common safety reqirements |
|
DIN EN 12581 |
Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
|
DIN EN 12582 |
Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD |
|
DIN EN 12583 |
Gas supply systems - Compressor stations - Functional requirements; English version of DIN EN 12583 |
|
DIN EN 12585 |
Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to DN 1 000 - Compatibility and interchangeability |
|
DIN EN 1262 |
Surface active agents - Determination of pH value of solutions or dispersions |
|
DIN EN 12634 |
Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method |
|
DIN EN 12671 |
Chemicals used for treatment of water intended for human consumption - Chlorine dioxide; English version of DIN EN 12671 |
|
DIN EN 12672 |
Chemicals used for treatment of water intended for human consumption - Potassium permanganate; English version of DIN EN 12672 |
|
DIN EN 12678 |
Chemicals used for treatment of water intended for human consumption - Potassium peroxomonosulfate; English version of DIN EN 12678 |
|
DIN EN 12728 |
Surface active agents - Determination of foaming power - Perforated disc beating method |
|
DIN EN 1275 |
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1) |
|
DIN EN 12757-1 |
Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
|
DIN EN 1276 |
Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas - Test method and requirements (phase 2, step 1) |
|
DIN EN 12766-1 |
Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD); English version of DIN EN 12766-1 |
|
DIN EN 12766-2 |
Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content; English version of DIN EN 12766-2 |
|
DIN EN 12766-3 |
Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD) |
|
DIN EN 1278 |
Chemicals used for treatment of water intended for human consumption - Ozone |
|
DIN EN 12829 |
Surface active agents - Preparation of water with known calcium hardness (ISO 2174:1990, modified) |
|
DIN EN 12836 |
Surface active agents - Determination of the water number of alkoxylated products |
|
DIN EN 12838 |
Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems; English version of DIN EN 12838 |
|
DIN EN 12876 |
Chemicals used for treatment of water intended for human consumption - Oxygen; English version of DIN EN 12876 |
|
DIN EN 12878 |
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
|
DIN EN 12901 |
Products used for treatment of water intended for human consumption - Inorganic supporting and filtering materials - Definitions; Trilingual version EN 12901:1999 |
|
DIN EN 12902 |
Products used for treatment of water intended for human consumption - Inorganic supporting and filtering materials - Methods of test |
|
DIN EN 12903 |
Products used for treatment of water intended for human consumption - Powdered activated carbon |
|
DIN EN 12904 |
Products used for treatment of water intended for human consumption - Silica sand and silica gravel |
|
DIN EN 12905 |
Products used for treatment of water intended for human consumption - Expanded aluminosilicate |
|
DIN EN 12906 |
Products used for treatment of water intended for human consumption - Pumice |
|
DIN EN 12909 |
Products used for treatment of water intended for human consumption - Anthracite |
|
DIN EN 12910 |
Products used for treatment of water intended for human consumption - Garnet |
|
DIN EN 12911 |
Products used for treatment of water intended for human consumption - Manganese greensand |
|
DIN EN 12913 |
Products used for treatment of water intended for human consumption - Powdered diatomaceous earth |
|
DIN EN 12914 |
Products used for treatment of water intended for human consumption - Powdered perlite |
|
DIN EN 12915-1 |
Products used for the treatment of water intended for human consumption - Granular activated carbon - Part 1: Virgin granular activated carbon |
|
DIN EN 12915-2 |
Products used for the treatment of water intended for human consumption - Granular activated carbon - Part 2: Reactivated granular activated carbon |
|
DIN EN 12916 |
Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
|
DIN EN 12926 |
Chemicals used for treatment of water intended for human consumption - Sodium peroxodisulfate; English version of DIN EN 12926 |
|
DIN EN 12931 |
Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous; English version of DIN EN 12931 |
|
DIN EN 12932 |
Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate; English version of DIN EN 12932 |
|
DIN EN 12933 |
Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Trichloroisocyanuric acid; English version of DIN EN 12933 |
|
DIN EN 12974 |
Surface active agents - Determination of the 1,4-dioxane content in alkyl-ethoxy-sulfate products by GLC/head space procedure; English version of DIN EN 12974 |
|
DIN EN 12981 |
Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
|
DIN EN 13012 |
Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers; English version of DIN EN 13012 |
|
DIN EN 13016-1 |
Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP); English version of DIN EN 13016-1 |
|
DIN EN 1302 |
Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods |
|
DIN EN 13074 |
Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation |
|
DIN EN 13075-1 |
Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bitumen emulsions; Mineral filler method |
|
DIN EN 13075-2 |
Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bitumen emulsions |
|
DIN EN 13086 |
Lead and lead alloys - Lead oxides; English version of DIN EN 13086 |
|
DIN EN 13131 |
Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method; English version of DIN EN 13131 |
|
DIN EN 13132 |
Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching; English version of DIN EN 13132 |
|
DIN EN 13150 |
Workbenches for laboratories - Safety requirements and test methods; English version of DIN EN 13150 |
|
DIN EN 13161 Berichtigung 1 |
Corrigenda to DIN EN 13161:2002 (EN 13161:2001/AC:2002) |
|
DIN EN 13176 |
Chemicals used for treatment of water intended for human consumption - Ethanol; English version of DIN EN 13176 |
|
DIN EN 13177 |
Chemicals used for treatment of water intended for human consumption - Methanol |
|
DIN EN 13194 |
Chemicals used for treatment of water intended for human consumption - Acetic acid; English version of DIN EN 13194 |
|
DIN EN 13267 |
Surface active agents - Determination of water content - Karl Fischer method; English version of DIN EN 13267 |
|
DIN EN 13268 |
Surface active agents - Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adducts; English version of DIN EN 13268 |
|
DIN EN 13270 |
Surface active agents - Determination of the active matter content in alkyl dimethyl betaines; English version of DIN EN 13270 |
|
DIN EN 13273 |
Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC); English version of DIN EN 13273 |
|
DIN EN 13300 |
Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification |
|
DIN EN 13301 |
Bitumen and bituminous binders - Determination of staining tendency of bitumen |
|
DIN EN 13303 |
Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen |
|
DIN EN 13304 |
Bitumen and bituminous binders - Framework for specification of oxidized bitumen |
|
DIN EN 13305 |
Bitumen and bituminous binders - Framework of specification of hard industrial bitumen |
|
DIN EN 13352 |
Specification for the performance of automatic tank contents gauges |
|
DIN EN 13355 |
Coating plants - Combined booths - Safety requirements |
|
DIN EN 13357 |
Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens |
|
DIN EN 13358 |
Bitumen and bituminous binders - Determination of the distillation characteristics of petroleum cut back bitumen products |
|
DIN EN 13364 |
Natural stone test methods - Determination of the breaking load at dowel hole; English version of DIN EN 13364 |
|
DIN EN 13373 |
Natural stone test methods - Determination of geometric characteristics on units |
|
DIN EN 13398 |
Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen |
|
DIN EN 13399 |
Bitumen and bituminous binders - Determination of storage stability of modified bitumen |
|
DIN EN 13423 |
Compressed natural gas vehicle operations; English version of DIN EN 13423 |
|
DIN EN 13435 |
Surface active agents - Determination of free amine content of alkyl dimethyl betaines; English version of DIN EN 13435 |
|
DIN EN 13483 |
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
|
DIN EN 13560 |
Surface active agents - Determination of amide nitrogen content - Potentiometric titration; English version of DIN EN 13560 |
|
DIN EN 13587 |
Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method |
|
DIN EN 13589 |
Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method |
|
DIN EN 1360 |
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
|
DIN EN 13610 |
Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and industrial areas - Test method and requirements (phase 2, step 1); |
|
DIN EN 13614 |
Bitumen and bituminous binders - Determination of adhesivity of bitumen emulsions by water immersion test - Aggregate method |
|
DIN EN 13616 |
Overfill prevention devices for static tanks for liquid petroleum fuels |
|
DIN EN 13617-1 |
Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
|
DIN EN 13617-1 Berichtigung 1 |
Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units; Corrigenda to DIN EN 13617-1:2004-08 |
|
DIN EN 13617-2 |
Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
|
DIN EN 13617-3 |
Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves |
|
DIN EN 13617-4 |
Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
|
DIN EN 13630-1 |
Explosives for civil uses - Detonating cords and safety fuses - Part 1: Requirements |
|
DIN EN 13630-10 |
Explosives for civil uses - Detonating cords and safety fuses - Part 10: Determination of initiating capability of detonating cords |
|
DIN EN 13630-11 |
Explosives for civil uses - Detonation cords and safety fuses - Part 11: Determination of velocity of detonation of detonating cords |
|
DIN EN 13630-12 |
Explosives for civil uses - Detonation cords and safety fuses - Part 12: Determination of burning duration of safety fuses |
|
DIN EN 13630-2 |
Explosives for civil uses - Detonating cords and safety fuses - Part 2: Determination of thermal stability of detonating cords and safety fuses |
|
DIN EN 13630-3 |
Explosives for civil uses - Detonating cords and safety fuses - Part 3: Determination of sensitiveness to friction of the core of detonating cords |
|
DIN EN 13630-4 |
Explosives for civil uses - Detonating cords and safety fuses - Part 4: Determination of sensitiveness to impact of detonating cords |
|
DIN EN 13630-5 |
Explosives for civil uses - Detonating cords and safety fuses - Part 5: Determination of resistance to abrasion of detonating cords |
|
DIN EN 13630-6 |
Explosives for civil uses - Detonating cords and safety fuses - Part 6: Determination of resistance to tension of detonating cords |
|
DIN EN 13630-7 |
Explosives for civil uses - Detonating cords and safety fuses - Part 7: Determination of the reliability of initiation of detonating cords |
|
DIN EN 13630-8 |
Explosives for civil uses - Detonating cords and safety fuses - Part 8: Determination of resistance to water of detonating cords and safety fuses |
|
DIN EN 13630-9 |
Explosives for civil uses - Detonating cords and safety fuses - Part 9: Determination of transmission of detonation from detonating cord to detonating cord |
|
DIN EN 13631-1 |
Explosives for civil uses - High explosives - Part 1: Requirements |
|
DIN EN 13631-10 |
Explosives for civil uses - High explosives - Part 10: Method for the verification of the means of initiation |
|
DIN EN 13631-11 |
Explosives for civil uses - High explosives - Part 11: Determination of transmission of detonation |
|
DIN EN 13631-12 |
Explosives for civil uses - High explosives - Part 12: Specifications of boosters with different initiating capability |
|
DIN EN 13631-14 |
Explosives for civil uses - High explosives - Part 14: Determination of velocity of detonation |
|
DIN EN 13631-15 |
Explosives for civil uses - High explosives - Part 15: Calculation of thermodynamic properties |
|
DIN EN 13631-16 |
Explosives for civil uses - High explosives - Part 16: Detection and measurement of toxic gases |
|
DIN EN 13631-2 |
Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives |
|
DIN EN 13631-5 |
Explosives for civil uses - High explosives - Part 5: Determination of resistance to water |
|
DIN EN 13631-6 |
Explosives for civil uses - High explosives - Part 6: Determination of resistance to hydrostatic pressure |
|
DIN EN 13631-7 |
Explosives for civil uses - High explosives - Part 7: Determination of safety and reliability at extreme temperatures |
|
DIN EN 13632 |
Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen |
|
DIN EN 13645 |
Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t |
|
DIN EN 13673-1 |
Determination of the maximum explosion pressure and the maximum pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure |
|
DIN EN 13673-2 |
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise |
|
DIN EN 13697 |
Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical desinfectants used in food, industrial, domestic and institutional areas - Test method and requirements without mechanical action (phase 2/step 2); English version of DIN EN 13697 |
|
DIN EN 13704 |
Quantitative suspension test for the evaluation of sporicidal activity of chemical desinfectants used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2/step 1); English version of DIN EN 13704 |
|
DIN EN 13716 |
Surface active agents - Determination of total base nitrogen - Potentiometric titration |
|
DIN EN 13717 |
Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration |
|
DIN EN 13723 |
Petroleum products - Determination of low lead contents in gasolines by wavelength-dispersive X-ray fluorescence spectrometry (XRF) |
|
DIN EN 13753 |
Products used for treatment of water intended for human consumption - Granular activated alumina |
|
DIN EN 13754 |
Products used for treatment of water intended for human consumption - Bentonite |
|
DIN EN 13755 |
Natural stone test methods - Determination of water absorption at atmospheric pressure; English version of DIN EN 13755 |
|
DIN EN 13755 Berichtigung 1 |
Corrigenda to DIN EN 13755:2002-03 |
|
DIN EN 13760 |
Automotive LPG filling system for light and heavy duty vehicles - Nozzle; Test requirements and dimensions |
|
DIN EN 13763-1 |
Explosives for civil uses - Detonators and relays - Part 1: Requirements |
|
DIN EN 13763-11 |
Explosives for civil uses - Detonators and relays - Part 11: Determination of resistance to damage by dropping of detonators and relays |
|
DIN EN 13763-12 |
Explosives for civil uses - Detonators and relays - Part 12: Determination of resistance to hydrostatic pressure |
|
DIN EN 13763-13 |
Explosives for civil uses - Detonators and relays - Part 13: Determination of resistance of electric detonators to electrostatic discharge |
|
DIN EN 13763-16 |
Explosives for civil uses - Detonators and relays - Part 16: Determination of delay accuracy |
|
DIN EN 13763-17 |
Explosives for civil uses - Detonators and relays - Part 17: Determination of no-fire current of electric detonators |
|
DIN EN 13763-18 |
Explosives for civil uses - Detonators and relays - Part 18: Determination of series firing current of electric detonators |
|
DIN EN 13763-19 |
Explosives for civil uses - Detonators and relays - Part 19: Determination of firing impulse of electric detonators |
|
DIN EN 13763-2 |
Explosives for civil uses - Detonators and relays - Part 2: Determination of thermal stability |
|
DIN EN 13763-20 |
Explosives for civil uses - Detonators and relays - Part 20: Determination of total resistance of electric detonators |
|
DIN EN 13763-21 |
Explosives for civil uses - Detonators and relays - Part 21: Determination of flash-over voltage of electric detonators |
|
DIN EN 13763-22 |
Explosives for civil uses - Detonators and relays - Part 22: Determination of capacitance, insulation resistance and insulation breakdown of leading wires |
|
DIN EN 13763-23 |
Explosives for civil uses - Detonators and relays - Part 23: Determination of the shock-wave velocity of shock tube |
|
DIN EN 13763-24 |
Explosives for civil uses - Detonators and relays - Part 24: Determination of the electrical non-conductivity of shock tube |
|
DIN EN 13763-25 |
Explosives for civil uses - Detonators and relays - Part 25: Determination of transfer capacity of surface connectors, relays and coupling accessories |
|
DIN EN 13763-26 |
Explosives for civil uses - Detonators and relays - Part 26: Definitions, methods and requirements for devices and accessories for reliable and safe function of detonators and relays |
|
DIN EN 13763-3 |
Explosives for civil uses - Detonators and relays - Part 3: Determination of sensitiveness to impact |
|
DIN EN 13763-4 |
Explosives for civil uses - Detonators and relays - Part 4: Determination of resistance to abrasion of leading wires and shock tubes |
|
DIN EN 13763-5 |
Explosives for civil uses - Detonators and relays - Part 5: Determination of resistance to cutting damage of leading wires and shock tubes |
|
DIN EN 13763-6 |
Explosives for civil uses - Detonators and relays - Part 6: Determination of resistance to cracking at low temperatures of leading wires |
|
DIN EN 13763-7 |
Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures |
|
DIN EN 13763-8 |
Explosives for civil uses - Detonators and relays - Part 8: Determination of the resistance to vibration of plain detonators |
|
DIN EN 13763-9 |
Explosives for civil uses - Detonators and relays - Part 9: Determination of resistance to bending of detonators |
|
DIN EN 13792 |
Colour coding of taps and valves for use in laboratories |
|
DIN EN 13856 |
Minimum requirements for the contact of the user manual for automotive LPG systems |
|
DIN EN 13857-1 |
Explosives for civil uses - Part 1: Terminology |
|
DIN EN 13857-3 |
Explosives for civil uses - Part 3: Information to be provided by the manufacturer or his authorized representative to the user |
|
DIN EN 1390 |
Wood preservatives - Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae - Laboratory method |
|
DIN EN 13919 |
Natural stone test methods - Determination of resistance to ageing by SO2 action in the presence of humidity |
|
DIN EN 13926 |
Surface active agents - Alkoxylated derivatives - Determination of hydroxyl value; N-methyl imidazole method |
|
DIN EN 13938-1 |
Explosives for civil uses - Propellants and rocket propellants - Part 1: Requirements |
|
DIN EN 13938-2 |
Explosives for civil uses - Propellants and rocket propellants - Part 2: Determination of resistance to electrostatic energy |
|
DIN EN 13938-3 |
Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration to detonation transition |
|
DIN EN 13938-4 |
Explosives for civil uses - Propellants and rocket propellants - Part 4: Determination of burning rate under ambient conditions |
|
DIN EN 13938-5 |
Explosives for civil uses - Propellants and rocket propellants - Part 5: Determination of voids and fissures |
|
DIN EN 13938-6 |
Explosives for civil uses - Propellants and rocket propellants - Part 6: Solid rocket propellants - Guide for the determination of integrity of inhibitor coatings |
|
DIN EN 13938-7 |
Explosives for civil uses - Propellants and rocket propellants - Part 7: Determination of properties of black powder |
|
DIN EN 13942 |
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999 modified); English version EN 13942:2003 |
|
DIN EN 13955 |
Surface active agents - Determination of Krafft-point and solubility of ionic surface active agents |
|
DIN EN 13966-1 |
Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels |
|
DIN EN 13996 |
Surface active agents - Foaming power and antifoaming power - Turbine stirring method |
|
DIN EN 14035-1 |
Fireworks - Part 1: Terminology; German version EN 14035-1:2003 |
|
DIN EN 14035-1 Berichtigung 1 |
Fireworks - Part 1: Terminology |
|
DIN EN 14035-10 |
Fireworks - Part 10: Double Bangers - Specification and test methods |
|
DIN EN 14035-12 |
Fireworks - Part 12: Flash bangers and flash banger batteries; Specifications and test methods |
|
DIN EN 14035-12 Berichtigung 1 |
Fireworks - Part 12: Flash banger and flash banger batteries - Specification and test methods |
|
DIN EN 14035-13 |
Fireworks - Part 13: Flash pellets - Specification and test methods |
|
DIN EN 14035-15 Berichtigung 1 |
Fireworks - Part 15: Fountains - Specification and test methods |
|
DIN EN 14035-17 |
Fireworks - Part 17: Ground spinners - Specification and test methods |
|
DIN EN 14035-19 |
Fireworks - Part 19: Hand-held sparklers; Specification and test methods |
|
DIN EN 14035-20 |
Fireworks - Part 20: Jumping crackers - Specification and test methods |
|
DIN EN 14035-21 |
Fireworks - Part 21: Jumping ground spinners - Specification and test methods |
|
DIN EN 14035-22 |
Fireworks - Part 22: Mines - Specification and test methods |
|
DIN EN 14035-23 |
Fireworks - Part 23: Non-hand-held sparklers; Specification and test methods |
|
DIN EN 14035-23 Berichtigung 1 |
Fireworks - Part 23: Non-hand-held sparklers - Specification and test methods |
|
DIN EN 14035-24 |
Fireworks - Part 24: Novelty matches - Specification and test methods |
|
DIN EN 14035-25 |
Fireworks - Part 25: Party Poppers - Specification and test methods |
|
DIN EN 14035-27 |
Fireworks - Part 27: Rockets; Specification and test methods |
|
DIN EN 14035-28 |
Fireworks - Part 28: Roman candles - Specification and test methods |
|
DIN EN 14035-29 |
Fireworks - Part 29: Serpents - Specification and test methods |
|
DIN EN 14035-31 |
Fireworks - Part 31: Shell-in-mortars - Specification and test methods |
|
DIN EN 14035-33 |
Fireworks - Part 33: Spinners - Specification and test methods |
|
DIN EN 14035-34 |
Fireworks - Part 34: Table bombs; Specification and test methods |
|
DIN EN 14035-34 Berichtigung 1 |
Fireworks - Part 34: Table bombs - Specification and test methods |
|
DIN EN 14035-35 |
Fireworks - Part 35: Throwdowns - Specification and test methods |
|
DIN EN 14035-36 |
Fireworks - Part 36: Wheels - Specification and test methods |
|
DIN EN 14035-38 |
Fireworks - Part 38: Shot tubes - Specification and test methods |
|
DIN EN 14035-4 |
Fireworks - Part 4: Bangers and banger batteries; Specification and test methods |
|
DIN EN 14035-4 Berichtigung 1 |
Fireworks - Part 4: Bangers and banger batteries - Specification and test methods; Corrigenda 1 to DIN EN 14035-4:2003-09 |
|
DIN EN 14035-6 |
Fireworks - Part 6: Bengal flames - Specification and test methods |
|
DIN EN 14035-7 |
Fireworks - Part 7: Bengal matches - Specification and test methods |
|
DIN EN 14035-8 |
Fireworks - Part 8: Bengal sticks - Specification and test methods |
|
DIN EN 14035-9 |
Fireworks - Part 9: Crackling granules - Specification and test methods |
|
DIN EN 1405 |
Chemicals used for treatment of water intended for human consumption - Sodium alginate |