|
DIN EN ISO 13734 |
Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods (ISO 13734:1998); English version of DIN EN ISO 13734 |
|
DIN EN ISO 13736 |
Petroleum products and other liquids - Determination of flash point - Abel closed cup method (ISO 13736:1997); English version of DIN EN ISO 13736 |
|
DIN EN ISO 13757 |
Liquefied petroleum gases - Determination of oily residues - High-temperature method (ISO 13757:1996) |
|
DIN EN ISO 13759 |
Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996) |
|
DIN EN ISO 13803 |
Paints and varnishes - Determination of reflection haze on paint films at 20° (ISO 13803:2000) |
|
DIN EN ISO 14111 |
Natural gas - Guidelines to traceability in analysis (ISO 14111:1997); English version of DIN EN ISO 14111 |
|
DIN EN ISO 14224 |
Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment (ISO 14224:2006); English version EN ISO 14224:2006 |
|
DIN EN ISO 14310 |
(DRAFT) Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO/DIS 14310:2007); English version prEN ISO 14310:2007 |
|
DIN EN ISO 14310 |
Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2001); German version EN ISO 14310:2001; German and English texts |
|
DIN EN ISO 14596 |
Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:1998) |
|
DIN EN ISO 14680-1 |
Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method (ISO 14680-1:2000) |
|
DIN EN ISO 14680-2 |
Paints and varnishes - Determination of pigment content - Part 2: Ashing method (ISO 14680-2:2000) |
|
DIN EN ISO 14680-3 |
Paints and varnishes - Determination of pigment content - Part 3: Filtration method (ISO 14680-3:2000) |
|
DIN EN ISO 14691 |
Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications (ISO 14691:1999); German version EN ISO 14691:2000 (German and english text) |
|
DIN EN ISO 14692-2 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002 |
|
DIN EN ISO 14692-2 Berichtigung 1 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002, Corrigenda to DIN EN ISO 14692-2:2005-07; English version EN ISO 14692-2:2002/AC:2006 |
|
DIN EN ISO 14692-3 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002 |
|
DIN EN ISO 14692-3 Berichtigung 1 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002, Corrigenda to DIN EN ISO 14692-3:2005-07; English version EN ISO 14692-3:2002/AC:2006 |
|
DIN EN ISO 14692-4 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002); English version EN ISO 14692-4:2002 |
|
DIN EN ISO 14693 |
Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003); English version EN ISO 14693:2003 |
|
DIN EN ISO 14912 |
Gas analysis - Conversion of gas mixture composition data (ISO 14912:2003) |
|
DIN EN ISO 14935 |
Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids (ISO 14935:1998) |
|
DIN EN ISO 15029-1 |
Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistance; Hollow-cone nozzle method (ISO 15029-1:1999) |
|
DIN EN ISO 1513 |
Paints and varnishes - Examination and preparation of samples for testing (ISO 1513:1992) |
|
DIN EN ISO 15136-1 |
Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2001) |
|
DIN EN ISO 15136-2 |
Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006); English version EN ISO 15136-2:2006 |
|
DIN EN ISO 15138 |
(DRAFT) Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO/DIS 15138:2006); English version prEN ISO 15138:2006 |
|
DIN EN ISO 15138 |
Petroleum and natural gas industries - Offshore production installation - Heating, ventilation and air-conditioning (ISO 15138:2000 plus Technical Corrigendum 1:2001); German and English version EN ISO 15138:2000 + AC:2002 |
|
DIN EN ISO 1514 |
Paints and varnishes - Standard panels for testing (ISO 1514:2004) |
|
DIN EN ISO 15156-1 |
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001); German and English version EN ISO 15156-1:2001 |
|
DIN EN ISO 15156-1 Berichtigung 1 |
Petroleum and natural gas industries - Material for use in H2S containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2001); German and English version EN ISO 15156-1:2001, Corrigenda to DIN EN ISO 15156-1:2003-05; German and English version EN ISO 15156-1:2001/AC:2006 |
|
DIN EN ISO 15156-2 |
Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2003); English version EN ISO 15156-2:2003 |
|
DIN EN ISO 15156-2 Berichtigung 1 |
Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2003); English version EN ISO 15156-2:2003, Corrigenda to DIN EN ISO 15156-2:2005-07; English version EN ISO 15156-2:2003/AC:2006 |
|
DIN EN ISO 15156-3 Berichtigung 1 |
Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2003); English version EN ISO 15156-3:2003, Corrigenda to DIN EN ISO 15156-3:2005-07; English version EN ISO 15156-3:2003/AC:2006 |
|
DIN EN ISO 1516 |
Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002) |
|
DIN EN ISO 1517 |
Paints and varnishes - Surface drying test by the Ballotini method (ISO 1517:1973) |
|
DIN EN ISO 15181-1 |
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2000) |
|
DIN EN ISO 15181-2 |
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate (ISO 15181-2:2000) |
|
DIN EN ISO 1519 |
Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2002) |
|
DIN EN ISO 1520 |
Paints and varnishes - Cupping test (ISO 1520:1999) |
|
DIN EN ISO 1520 |
Paints and varnishes - Cupping test (ISO 1520:2006) |
|
DIN EN ISO 1522 |
Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
|
DIN EN ISO 1523 |
Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
|
DIN EN ISO 1524 |
Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2000) |
|
DIN EN ISO 15463 |
Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe (ISO 15463:2003); English version EN ISO 15463:2003 |
|
DIN EN ISO 15528 |
Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2000); English version of DIN EN ISO 15528 |
|
DIN EN ISO 15546 |
(DRAFT) Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO/FDIS 15546:2006); English version prEN ISO 15546:2006 |
|
DIN EN ISO 15546 |
Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2002); English version EN ISO 15546:2002 |
|
DIN EN ISO 15547-1 |
Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 1: Plate-and-frame heat exchangers (ISO 15547-1:2005); English version EN ISO 15547-1:2005 |
|
DIN EN ISO 15547-2 |
Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers (ISO 15547-2:2005); English version EN ISO 15547-2:2005 |
|
DIN EN ISO 15710 |
Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002) |
|
DIN EN ISO 15711 |
Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) |
|
DIN EN ISO 15715 |
Binders for paints and varnishes - Determination of turbidity (ISO 15715:2003) |
|
DIN EN ISO 15761 |
Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002); German version EN ISO 15761:2002 (German and English text) |
|
DIN EN ISO 16070 |
Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005); English version EN ISO 16070:2005 |
|
DIN EN ISO 16708 |
Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods (ISO 16708:2006); English version EN ISO 16708:2006 |
|
DIN EN ISO 16805 |
Binders for paints and varnishes - Determination of glass transition temperature (ISO 16805:2003) |
|
DIN EN ISO 16812 |
Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2007); English version EN ISO 16812:2007 |
|
DIN EN ISO 16862 |
Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003) |
|
DIN EN ISO 17078-1 |
Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels (ISO 17078-1:2004); English version EN ISO 17078-1:2004 |
|
DIN EN ISO 17078-2 |
(DRAFT) Petroleum and natural gas industries - Drilling and production equipment - Part 2: Flow control devices for side-pocket mandrels (ISO/DIS 17078-2:2005); English version prEN ISO 17078-2:2005 |
|
DIN EN ISO 17292 |
Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2004) |
|
DIN EN ISO 17776 |
Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment (ISO 17776:2000) |
|
DIN EN ISO 17776 |
Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment (ISO 17776:2000); German and English version EN ISO 17776:2002 |
|
DIN EN ISO 17895 |
Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005) |
|
DIN EN ISO 18453 |
Natural gas - Correlation between water content and water dew point (ISO 18453:2004) |
|
DIN EN ISO 19739 |
Natural gas - Determination of sulfur compounds using gas chromatography (ISO 19739:2004) |
|
DIN EN ISO 19900 |
Petroleum and natural gas industries - General requirements for offshore structures (ISO 19900:2002); English version EN ISO 19900:2002 |
|
DIN EN ISO 19901-1 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations (ISO 19901-1:2005); English version EN ISO 19901-1:2005 |
|
DIN EN ISO 19901-1 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations (ISO 19901-1:2005); English version EN ISO 19901-1:2005 |
|
DIN EN ISO 19901-1 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations (ISO 19901-1:2005); English version EN ISO 19901-1:2005 |
|
DIN EN ISO 19901-2 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria (ISO 19901-2:2004); English version EN ISO 19901-2:2004 |
|
DIN EN ISO 19901-5 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2003); English version EN ISO 19901-5:2003 |
|
DIN EN ISO 19901-6 |
(DRAFT) Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations (ISO/DIS 19901-6:2006); English version prEN ISO 19901-6:2006 |
|
DIN EN ISO 19901-7 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO 19901-7:2005); English version EN ISO 19901-7:2005 |
|
DIN EN ISO 19904-1 |
(DRAFT) Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO/DIS 19904-1:2004); English version prEN ISO 19904-1:2004 |
|
DIN EN ISO 19904-1 |
Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006); English version EN ISO 19904-1:2006 |
|
DIN EN ISO 20566 |
Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash (ISO 20566:2005) |
|
DIN EN ISO 20567-1 |
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2005) |
|
DIN EN ISO 20567-2 |
Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2005) |
|
DIN EN ISO 20623 |
Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions) (ISO 20623:2003) |
|
DIN EN ISO 20763 |
Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004) |
|
DIN EN ISO 20764 |
Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO 20764:2003) |
|
DIN EN ISO 20783-1 |
Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2003) |
|
DIN EN ISO 20783-2 |
Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003) |
|
DIN EN ISO 20815 |
(DRAFT) Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO/DIS 20815:2006); English version prEN ISO 20815:2006 |
|
DIN EN ISO 20823 |
Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823:2003) |
|
DIN EN ISO 20843 |
Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2003) |
|
DIN EN ISO 20844 |
Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO 20844:2004) |
|
DIN EN ISO 20847 |
Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004) |
|
DIN EN ISO 20884 |
Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2004) |
|
DIN EN ISO 21227-1 |
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance (ISO 21227-1:2003) |
|
DIN EN ISO 21227-2 |
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 2: Evaluation procedure for multi-impact stone-chipping test (ISO 21227-2:2006) |
|
DIN EN ISO 21329 |
Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors (ISO 21329:2004); English version EN ISO 21329:2004 |
|
DIN EN ISO 21469 |
Safety of machinery - Lubricants with incidental product contact - Hygiene requirements (ISO 21469:2006) |
|
DIN EN ISO 21809-1 |
(DRAFT) Petroleum and natural gas industries - External coatings for buried and submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO/DIS 21809-1:2006); English version prEN ISO 21809-1:2006 |
|
DIN EN ISO 21809-2 |
(DRAFT) Petroleum and natural gas industries - External coatings for buried and submerged pipelines used in pipeline transportation systems - Part 2: Fusion bonded epoxy coatings (ISO/DIS 21809-2:2006); English version prEN ISO 21809-2:2006 |
|
DIN EN ISO 23251 |
(DRAFT) Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems (ISO 23251:2006); English version prEN ISO 23251:2007 |
|
DIN EN ISO 2409 |
Paints and varnishes - Cross-cut test (ISO 2409:1992) |
|
DIN EN ISO 2431 |
Determination of flow time of paints and varnishes by use of flow cups (ISO 2431:1993 + Corr 1:1994) |
|
DIN EN ISO 24450 |
Laboratory glassware - Wide-necked boiling flasks (ISO 24450:2005) |
|
DIN EN ISO 2495 |
Iron blue pigments - Specifications and methods of test (ISO 2495:1995); English version of DIN EN ISO 2495 |
|
DIN EN ISO 2592 |
Petroleum products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2000) |
|
DIN EN ISO 2810 |
Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004) |
|
DIN EN ISO 2811-1 |
Paints and varnishes - Determination of density - Part 1: Pyknometer method (ISO 2811-1:1997) |
|
DIN EN ISO 2811-3 |
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:1997); English version of DIN EN ISO 2811-3 |
|
DIN EN ISO 2811-4 |
Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:1997); English version of DIN EN ISO 2811-4 |
|
DIN EN ISO 2813 |
Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85°x (ISO 2813:1994, including Technical Corrigendum 1:1997) |
|
DIN EN ISO 2814 |
Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour (ISO 2814:1973) |
|
DIN EN ISO 2815 |
Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
|
DIN EN ISO 28300 |
(DRAFT) Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO/DIS 28300:2006); English version prEN ISO 28300:2006 |
|
DIN EN ISO 2871-1 |
Determination of cationic-active matter content of detergents - High-molecular mass cationic-active matter (ISO 2871-1:1988) |
|
DIN EN ISO 2884-1 |
Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999) |
|
DIN EN ISO 2884-2 |
Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003) |
|
DIN EN ISO 3171 |
Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988); English version of DIN EN ISO 3171 |
|
DIN EN ISO 3231 |
Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
|
DIN EN ISO 3248 |
Paints and varnishes - Determination of the effect of heat (ISO 3248:1998); English version of DIN EN ISO 3248 |
|
DIN EN ISO 3262-1 |
Extenders for paintss- Specifications and methods of test - Part 1: Introduction and general test methods (ISO 3262-1:1997) |
|
DIN EN ISO 3262-10 |
Extenders for paints - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO 3262-10:2000); English version of DIN EN ISO 3262-10 |
|
DIN EN ISO 3262-11 |
Extenders for paints - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates (ISO 3262-11:2000); English version of DIN EN ISO 3262-11 |
|
DIN EN ISO 3262-12 |
Extenders for paints - Specifications and methods of test - Part 12: Muscovite-type mica (ISO 3262-12:2001) |
|
DIN EN ISO 3262-13 |
Extenders for paints - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:1997) |
|
DIN EN ISO 3262-14 |
Extenders for paints - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2000); English version of DIN EN ISO 3262-14 |
|
DIN EN ISO 3262-16 |
Extenders for paints - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2000); English version of DIN EN ISO 3262-16 |
|
DIN EN ISO 3262-17 |
Extenders for paints - Specifications and methods of test - Part 17: Precipitated calcium silicate (ISO 3262-17:2000); English version of DIN EN ISO 3262-17 |
|
DIN EN ISO 3262-18 |
Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2000); English version of DIN EN ISO 3262-18 |
|
DIN EN ISO 3262-19 |
Extenders for paints - Specifications and methods of test - Part 19: Precipitated silica (ISO 3262-19:2000); English version of DIN EN ISO 3262-19 |
|
DIN EN ISO 3262-20 |
Extenders for paints - Specifications and methods of test - Part 20: Fumed silica (ISO 3262-20:2000); English version of DIN EN ISO 3262-20 |
|
DIN EN ISO 3262-21 |
Extenders for paints - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO 3262-21:2000); English version of DIN EN ISO 3262-21 |
|
DIN EN ISO 3262-22 |
Extenders for paints - Specifications and methods of test - Part 22: Flux-calcined Kieselguhr (ISO 3262-22:2001); English version of DIN EN ISO 3262-22 |
|
DIN EN ISO 3262-3 |
Extenders for paints - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:1998) |
|
DIN EN ISO 3262-4 |
Extenders for paints - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:1998) |
|
DIN EN ISO 3262-5 |
Extenders for paints - Specifications and methods of test; Part 5: Natural crystalline calcium carbonate (ISO 3262-5 : 1998) English version of DIN EN ISO 3262-5 |
|
DIN EN ISO 3262-7 |
Extenders for paints - Specifications and methods of test - Part 7: Dolomite (ISO 3262-7:1998) |
|
DIN EN ISO 3262-8 |
Extenders for paints - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:1999) |
|
DIN EN ISO 3262-9 |
Extenders for paints - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:1997) |
|
DIN EN ISO 3405 |
Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000); English version of DIN EN ISO 3405 |
|
DIN EN ISO 3549 |
Zinc dust pigments for paints - Specifications and test methods (ISO 3549:1995) |
|
DIN EN ISO 3675 |
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
|
DIN EN ISO 3678 |
Paints and varnishes - Print-free test (ISO 3678:1976) |
|
DIN EN ISO 3679 |
Determination of flash point - Rapid equilibrium closed cup method (ISO 3679:2004) |
|
DIN EN ISO 3681 |
Binders for paints and varnishes - Determination of saponification value by the titrimetric method (ISO 3681:1996) |
|
DIN EN ISO 3735 |
Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999) |
|
DIN EN ISO 3830 |
Determination of lead content of gasoline by the iodine monochloride method (ISO 3830:1993) |
|
DIN EN ISO 3838 |
Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004) |
|
DIN EN ISO 385 |
Laboratory glassware - Burettes (ISO 385:2005) |
|
DIN EN ISO 3993 |
Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density by the pressure hydrometer method (ISO 3993:1984) |
|
DIN EN ISO 4256 |
Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1996) |
|
DIN EN ISO 4257 |
Liquefied petroleum gases - Method of sampling (ISO 4257:2001); English version of DIN EN ISO 4257 |
|
DIN EN ISO 4263-1 |
Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 1: Procedure for mineral oils (ISO 4263-1:2003) |
|
DIN EN ISO 4263-2 |
Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003) |
|
DIN EN ISO 4263-3 |
Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2006) |
|
DIN EN ISO 4263-4 |
Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils (ISO 4263-4:2006) |
|
DIN EN ISO 4264 |
Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:1995) |
|
DIN EN ISO 4267-2 |
Calculation of oil quantities for petroleum and liquid petroleum products - Part 2: Dynamic measurement (ISO 4267-2:1988) |
|
DIN EN ISO 4320 |
Non-ionic surface active agents - Determination of cloud point index by the volumetric method (ISO 4320:1977, including Erratum:1980) |
|
DIN EN ISO 4404-1 |
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2001) |
|
DIN EN ISO 4404-2 |
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2003) |
|
DIN EN ISO 4618 |
Paints and varnishes - Terms and definitions (ISO 4618:2006); Trilingual version EN ISO 4618:2006 |
|
DIN EN ISO 4622 |
Paints and varnishes - Pressure test for stackability (ISO 4622:1992) |
|
DIN EN ISO 4623-1 |
Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrate (ISO 4623-1:2000) |
|
DIN EN ISO 4623-2 |
Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2003) |
|
DIN EN ISO 4623-2 Berichtigung 1 |
Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2003); Corregenda 1 to DIN EN ISO 4623-2:2004:06 |
|
DIN EN ISO 4624 |
Paints, varnishes and plastics - Pull-off test for adhesion (ISO 4624:2002) |
|
DIN EN ISO 4625-1 |
Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004) |
|
DIN EN ISO 4625-2 |
Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method (ISO 4625-2:2004) |
|
DIN EN ISO 4628-10 |
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2003) |
|
DIN EN ISO 4628-2 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2003) |
|
DIN EN ISO 4628-4 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2003) |
|
DIN EN ISO 4628-5 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2003) |
|
DIN EN ISO 4628-6 |
Paints and varnishes - Evaluation of degradation of paint coatings and designation of intensity, quantity and size of common types of defect - Part 6: Rating of degree of chalking by tape method (ISO 4628-6:1990); English version of DIN EN ISO 4628-6 |
|
DIN EN ISO 4629 |
Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method (ISO 4629:1996) |
|
DIN EN ISO 4630-1 |
Clear liquids - Estimation of colour by the Gardner colour scale - Part 1: Visual method (ISO 4630-1:2004) |
|
DIN EN ISO 4630-2 |
Clear liquids - Estimation of colour by the Gardner colour scale - Part 2: Spectrophotometric method (ISO 4630-2:2004) |
|
DIN EN ISO 4788 |
Laboratory glassware - Graduated measuring cylinders (ISO 4788:2005) |
|
DIN EN ISO 4796-1 |
Laboratory glassware - Bottles - Part 1: Screw neck bottles (ISO 4796-1:2000); English version of DIN EN ISO 4796-1 |
|
DIN EN ISO 4796-2 |
Laboratory glassware - Bottles - Part 2: Conical neck bottles (ISO 4796-2:2000); English version of DIN EN ISO 4796-2 |
|
DIN EN ISO 4796-3 |
Laboratory glassware - Bottles - Part 3: Aspirator bottles (ISO 4796-3:2000); English version of DIN EN ISO 4796-3 |
|
DIN EN ISO 4797 |
Laboratory glassware - Boiling flasks with conical ground joints (ISO 4797:2004) |
|
DIN EN ISO 5163 |
Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2005) |
|
DIN EN ISO 5164 |
Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2005) |
|
DIN EN ISO 5165 |
Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:1998) |
|
DIN EN ISO 591-1 |
Titanium dioxide pigments for paints - Part 1: Specifications and methods of test (ISO 591-1:2000); English version of DIN EN ISO 591-1 |
|
DIN EN ISO 6141 |
Gas analysis - Requirements for certificates for calibration gases and gas mixtures (ISO 6141:2000) |
|
DIN EN ISO 6142 |
Gas analysis - Preparation of calibration gas mixtures - Gravimetric method (ISO 6142:2001) |
|
DIN EN ISO 6143 |
Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001) |
|
DIN EN ISO 6144 |
Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003) |
|
DIN EN ISO 6246 |
Gum content of light and middle distillate fuels - Jet evaporation method (ISO 6246:1995) |
|
DIN EN ISO 6251 |
Liquefied petroleum gases - Corrosiveness to copper - Copper strip test (ISO 6251:1996) |
|
DIN EN ISO 6271-1 |
Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 1: Visual method (ISO 6271-1:2004) |
|
DIN EN ISO 6271-2 |
Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 2: Spectrophotometric method (ISO 6271-2:2004) |
|
DIN EN ISO 6272-1 |
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2002) |
|
DIN EN ISO 6272-2 |
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2002) |
|
DIN EN ISO 6326-5 |
Determination of sulfur compounds in natural gas - Part 5: Lingener combustion method (ISO 6326-5:1989) |
|
DIN EN ISO 6504-1 |
Paints and varnishes - Determination of hiding power - Part 1: Kubelka-Munk method for white and light-coloured paints (ISO 6504-1:1983) |
|
DIN EN ISO 6504-3 |
Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate (ISO 6504-3:2006) |
|
DIN EN ISO 6570 |
Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods (ISO 6570:2001) |
|
DIN EN ISO 6744-2 |
Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content (ISO 6744-2:1999) |
|
DIN EN ISO 6744-3 |
Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content (ISO 6744-3:1999) |
|
DIN EN ISO 6744-4 |
Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999) |
|
DIN EN ISO 6807 |
Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003) |
|
DIN EN ISO 6808 |
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:1999); English version of DIN EN ISO 6808 |
|
DIN EN ISO 6845 |
Surface active agents - Technical alkane sulfonates - Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content (ISO 6845:1989) |
|
DIN EN ISO 6860 |
Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006) |
|
DIN EN ISO 6974-1 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis (ISO 6974-1:2000) |
|
DIN EN ISO 6974-2 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data (ISO 6974-2:2001) |
|
DIN EN ISO 6974-3 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns (ISO 6974-3:2000) |
|
DIN EN ISO 6974-4 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:2000) |
|
DIN EN ISO 6974-5 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns (ISO 6974-5:2000) |
|
DIN EN ISO 6974-6 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002) |
|
DIN EN ISO 6975 |
Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997) |
|
DIN EN ISO 6976 |
Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition (ISO 6976:1995 including Corrigendum 1:1997, Corrigendum 2:1997 and Corrigendum 3:1999) |
|
DIN EN ISO 6978-1 |
Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine (ISO 6978-1:2003) |
|
DIN EN ISO 6978-2 |
Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy (ISO 6978-2:2003) |
|
DIN EN ISO 7278-1 |
Dynamic measurement of liquid hydrocarbons - Proving systems for volumetric meters - Part 1: General principles (ISO 7278-1:1987) |
|
DIN EN ISO 7278-2 |
Dynamic measurement of liquid hydrocarbons - Proving systems for volumetric meters - Part 2: Pipe provers (ISO 7278-2:1988) |
|
DIN EN ISO 7536 |
Determination of oxidation stability of gasoline by the induction period method (ISO 7536:1994) |
|
DIN EN ISO 7579 |
Dyestuffs - Determination of solubility in organic solvents by gravimetry (ISO 7579:1990) |
|
DIN EN ISO 7783-1 |
Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998) |
|
DIN EN ISO 7784-1 |
Paints and varnishes - Determination of resistance to abrasion - Part 1: Rotating abrasive-paper-covered wheel method (ISO 7784-1:1997) |
|
DIN EN ISO 7784-2 |
Paints and varnishes - Determination of resistance to abrasion - Part 2: Rotating abrasive rubber wheel method (ISO 7784-2:1997) |
|
DIN EN ISO 7784-3 |
Paints and varnishes - Determination of resistance to abrasion - Part 3: Reciprocating test panel method (ISO 7784-3:2000) |
|
DIN EN ISO 787-10 |
General methods of test for pigments and extenders - Determination of density using a pyknometer (ISO 787-10:1993) |
|
DIN EN ISO 787-11 |
General methods of test for pigments and extenders - Determination of tamped volume and apparent density after tamping (ISO 787-11:1981) |
|
DIN EN ISO 787-13 |
General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulphates, chlorides and nitrates (ISO 787-13:2002) |
|
DIN EN ISO 787-14 |
General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2002) |
|
DIN EN ISO 787-15 |
General methods of test for pigments and extenders - Comparison of resistance to light of coloured pigments of similar types (ISO 787-15:1986) |
|
DIN EN ISO 787-16 |
General methods of test for pigments and extenders - Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments by the visual comparison method (ISO 787-16:1986) |
|
DIN EN ISO 787-18 |
General methods of test for pigments and extenders - Determination of oversize using a mechanical flushing procedure (ISO 787-18:1983) |
|
DIN EN ISO 787-19 |
General methods of test for pigments - Determination of water-soluble nitrates by the salicylic acid method (ISO 787-19:1974) |
|
DIN EN ISO 787-2 |
General methods of test for pigments and extenders - Determination of matter volatile at 105 °C (ISO 787-2:1981) |
|
DIN EN ISO 787-23 |
General methods of test for pigments and extenders - Determination of density (using a centrifuge to remove entrained air) (ISO 787-23:1979) |
|
DIN EN ISO 787-24 |
General methods of test for pigments and extenders - Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments by photometry (ISO 787-24:1985) |
|
DIN EN ISO 787-25 |
General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:1993) |
|
DIN EN ISO 787-3 |
General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water - Hot extraction method (ISO 787-3:2000); English version of DIN EN ISO 787-3 |
|
DIN EN ISO 787-5 |
General methods of test for pigments and extenders - Determination of oil absorption value (ISO 787-5:1980) |
|
DIN EN ISO 787-8 |
General methods of test for pigments and extenders - Part 8: Determination of matter soluble in water - Cold extraction method (ISO 787-8:2000); English version of DIN EN ISO 787-8 |
|
DIN EN ISO 787-9 |
General methods of test for pigments and extenders - Determination of pH value of an aqueous suspension (ISO 787-9:1981) |
|
DIN EN ISO 8028 |
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999); English version of DIN EN ISO 8028 |
|
DIN EN ISO 8130-14 |
Coating powders - Part 14: Terminology (ISO 8130-14:2004); Trilingual version EN ISO 8130-14:2004 |
|
DIN EN ISO 8130-9 |
Coating powders - Part 9: Sampling (ISO 8130-9:1992) |
|
DIN EN ISO 8222 |
Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002) |
|
DIN EN ISO 8311 |
Calibration of membrane tanks and independent prismatic tanks for refrigerated light hydrocarbon fluids in ships - Physical measurement (ISO 8311:1989) |
|
DIN EN ISO 8502-6 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:2006) |
|
DIN EN ISO 862 |
Surface active agents - Vocabulary (ISO 862:1984, including Corrigendum 1:1993) |
|
DIN EN ISO 8655-1 |
Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations (ISO 8655-1:2002) |
|
DIN EN ISO 8655-2 |
Piston-operated volumetric apparatus - Part 2: Piston pipettes (ISO 8655-2:2002) |
|
DIN EN ISO 8655-3 |
Piston-operated volumetric apparatus - Part 3: Piston burettes (ISO 8655-3:2002) |
|
DIN EN ISO 8655-4 |
Piston-operated volumetric apparatus - Part 4: Dilutors (ISO 8655-4:2002) |
|
DIN EN ISO 8655-5 |
Piston-operated volumetric apparatus - Part 5: Dispenser (ISO 8655-5:2002) |
|
DIN EN ISO 8655-6 |
Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002) |
|
DIN EN ISO 8655-7 |
Piston-operated volumetric apparatus - Part 7: Non-gravimetric methods for the assessment of equipment performance (ISO 8655-7:2005) |
|
DIN EN ISO 8754 |
Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003) |
|
DIN EN ISO 8780-1 |
Methods of dispersion for assessment of dispersion characteristics of pigments and extenders - Introduction (ISO 8780-1:1990) |
|
DIN EN ISO 8780-2 |
Methods of dispersion for assessment of dispersion characteristics of pigments and extenders - Dispersion using an oscillatory shaking machine (ISO 8780-2:1990) |
|
DIN EN ISO 8780-4 |
Methods of dispersion for assessment of dispersion characteristics of pigments and extenders - Dispersion using a bead mill (ISO 8780-4:1990) |
|
DIN EN ISO 8780-5 |
Methods of dispersion for assessment of dispersion characteristics of pigments and extenders - Dispersion using an automatic muller (ISO 8780-5:1990) |
|
DIN EN ISO 8780-6 |
Methods of dispersion for assessment of dispersion characteristics of pigments and extenders - Dispersion using a triple-roll mill (ISO 8780-6:1990) |
|
DIN EN ISO 8781-1 |
Methods of assessment of dispersion characteristics of pigments and extenders - Assessment from the change in tinting strength of coloured pigments (ISO 8781-1:1990) |
|
DIN EN ISO 8781-2 |
Methods of assessment of dispersion characteristics of pigments and extenders - Assessment from the change in fineness of grind (ISO 8781-2:1990) |
|
DIN EN ISO 8781-3 |
Methods of assessment of dispersion characteristics of pigments and extenders - Assessment from the change in gloss (ISO 8781-3:1990) |
|
DIN EN ISO 8799 |
Determination of unsulfated matter content of sulfated ethoxylated alcohols and alkylphenols (ISO 8799:1988) |
|
DIN EN ISO 8819 |
Liquefied petroleum gases - Detection of hydrogen sulfide by the lead acetate method (ISO 8819:1993) |
|
DIN EN ISO 8973 |
Liquefied petroleum gases - Calculation method for density and vapour pressure (ISO 8973:1997); English version of DIN EN ISO 8973 |
|
DIN EN ISO 9029 |
Crude petroleum - Determination of water by the distillation method (ISO 9029:1990) |
|
DIN EN ISO 9038 |
Test for sustained combustibility of liquids (ISO 9038:2002) |
|
DIN EN ISO 9514 |
Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
|
DIN ISO 11798 |
Information and documentation - Permanence and durability of writing, printing and copying on paper - Requirements and test methods (ISO 11798:1999) |
|
DIN ISO 12156-1 |
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:1997, including Technical Corrigendum 1:1998) |
|
DIN ISO 12980 |
Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for electrodes - Analysis using an X-ray fluorescence method (ISO 12980:2000) |
|
DIN ISO 14446 |
Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
|
DIN ISO 15380 |
Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR (ISO 15380:2002) |
|
DIN ISO 15597 |
Petroleum and related products - Determination of chlorine and bromine content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 15597:2001) |
|
DIN ISO 1773 |
Laboratory glassware - Narrow-necked boiling flasks (ISO 1773:1997) |
|
DIN ISO 2049 |
Petroleum products - Determination of colour (ASTM scale) (ISO 2049:1996) |
|
DIN ISO 2137 |
Petroleum products - Lubricating grease and petrolatum - Determination of cone penetration (ISO 2137:1985) |
|
DIN ISO 2176 |
Petroleum products - Lubricating grease - Determination of dropping point (ISO 2176:1995) |
|
DIN ISO 277 |
Binders for paints and varnishes - Raw tung oil - Requirements and methods of test (ISO 277:2002) |
|
DIN ISO 2836 |
Graphic technology - Prints and printing inks - Assessment of resistance to various agents (ISO 2836:2004) |
|
DIN ISO 2977 |
Petroleum products and hydrocarbon solvents - Determination of aniline point and mixed aniline point (ISO 2977:1997) |
|
DIN ISO 3013 |
Petroleum products - Determination of the freezing point of aviation fuels (ISO 3013:1997) |
|
DIN ISO 3014 |
Petroleum products - Determination of the smoke point of kerosine (ISO 3014:1993) |
|
DIN ISO 3711 |
Lead chromate pigments and lead chromate-molybdate pigments - Specifications and methods of test (ISO 3711:1990) |
|
DIN ISO 4619 |
Driers for paints and varnishes (ISO 4619:1998) |
|
DIN ISO 4798 |
Laboratory glassware - Filter funnels (ISO 4798:1997) |
|
DIN ISO 5275 |
Petroleum products and hydrocarbon solvents - Detection of thiols and other sulfur species - Doctor test (ISO 5275:2003) |
|
DIN ISO 6614 |
Petroleum products - Determination of water separability of petroleum oils and synthetic fluids (ISO 6614:1994) |
|
DIN ISO 6745 |
Zinc phosphate pigments for paints - Specifications and methods of test (ISO 6745:1990) |
|
DIN ISO 7120 |
Petroleum products and lubricants - Petroleum oils and other fluids - Determination of rust-preventing characteristics in the presence of water (ISO 7120:1987) |
|
DIN ISO 8130-1 |
Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:1992) |
|
DIN ISO 8130-10 |
Coating powders - Part 10: Determination of deposition efficiency (ISO 8130-10:1998) |
|
DIN ISO 8130-11 |
Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:1997) |
|
DIN ISO 8130-12 |
Coating powders - Part 12: Determination of compatibility (ISO 8130-12:1998) |
|
DIN ISO 8130-13 |
Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001) |
|
DIN ISO 8130-2 |
Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method) (ISO 8130-2:1992) |
|
DIN ISO 8130-3 |
Coating powders - Part 3: Determination of density by liquid displacement pyknometer (ISO 8130-3:1992) |
|
DIN ISO 8130-4 |
Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:1992 + Corr. 1:1993) |
|
DIN ISO 8130-6 |
Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:1992, including Amendment 1:1998) |
|
DIN ISO 8130-7 |
Coating powders - Part 7: Determination of loss of mass on stoving (ISO 8130-7:1992) |
|
DIN ISO 8130-8 |
Coating powders - Part 8: Assessment of the storage stability of thermosetting powders (ISO 8130-8:1994) |