|
DIN 18530 |
Solid structural decks for roofs; design and construction |
|
DIN 18542 |
Impregnated cellular plastics strips for sealing external joints - Requirements and testing |
|
DIN 18545-1 |
Glazing with sealants; rebates; requirements |
|
DIN 18545-2 |
Glazing with sealants - Part 2: Sealants |
|
DIN 18545-3 |
Glazing with sealants; rebates; glazing systems |
|
DIN 18554-1 |
Testing of masonry; determination of compressive strenght and of elastic modulus |
|
DIN 18555-1 |
Testing of mortars containing mineral binders; general, sampling, test mortar |
|
DIN 18555-2 |
Testing of mortars containing mineral binders; freshly mixed mortars containing aggregates of dense structure (heavy aggregates); determination of consistence, bulk density and air content |
|
DIN 18555-3 |
Testing of mortars containing mineral binders; hardened mortars; determination of flexural strength, compressive strength and bulk density |
|
DIN 18555-4 |
Testing of mortars containing mineral binders; hardened mortars; determination of linear and transverse strain and of deformation characteristics of masonry mortars by the static pressure test |
|
DIN 18555-6 |
Testing of mortars containing mineral binders; determination of bond strength of hardened mortar |
|
DIN 18555-8 |
Testing of mortars containing mineral binders; freshly mixed mortar; determination of workability time and correction time of thin-bed mortar for use with masonry |
|
DIN 18555-9 |
Testing of mortars containing mineral binders - Part 9: Determination the compressive strength of hardened mortar |
|
DIN 18556 |
Testing of coating material for synthetic resin plasters and of synthetic resin plasters |
|
DIN 18558 |
Synthetic resin plasters; terminology, requirements, application |
|
DIN 18560-1 |
Floor screeds in building construction - Part 1: General requirements, testing and construction |
|
DIN 18560-2 |
Floor screeds in building construction - Part 2: Floor screeds and heating floor screeds on insulation layers |
|
DIN 18560-4 |
Floor screeds - Part 4: Screeds laid on separated layer |
|
DIN 18560-7 |
Floor screeds - Part 7: Heavy-duty screeds (industrial screeds) |
|
DIN 18799-3 |
Fixed ladders - Ladders for chimneys - Safety requirements |
|
DIN 18801 |
Structural steel in building; design and construction |
|
DIN 18807-1 |
Trapezoidal sheeting in building; trapezoidal steel sheeting; general requirements and determination of loadbearing capacity by calculation |
|
DIN 18807-2 |
Trapezoidal sheeting in building; trapezoidal steel sheeting; determination of loadbearing capacity by testing |
|
DIN 18807-3 |
Trapezoidal sheeting in building; trapezoidal steel sheeting; structural analysis and design |
|
DIN 18807-6 |
Trapezoidal aluminium sheeting and connections in building - Part 6: Determination of loadbearing capacity by calculation |
|
DIN 18807-7 |
Trapezoidal aluminium sheeting and connections in building - Determination of loadbearing capacity by testing |
|
DIN 18807-8 |
Trapezoidal aluminium sheeting and connections in building - Analysis at ultimate and serviceability limit states |
|
DIN 18807-9 |
Trapezoidal aluminium sheeting and connections in building - Part 9: Structural detailing and installation |
|
DIN 18808 |
Steel structures; structures made from hollow sections subjected to predominantly static loading |
|
DIN 18809 |
Steel road bridges and foot bridges; design and construction |
|
DIN 18889 |
Coal-fired Water-heater with Storage Boiler, without Pressure for Test Pressure of 1 Atmosphere; Terms employed, Construction, Quality, Capacity and Testing |
|
DIN 18960 |
Running costs of buildings |
|
DIN 1946-7 |
Heating, ventilation and air conditioning - Air treatment systems in laboratories (VDI Code of practice) |
|
DIN 19531-10 |
Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for drainage systems inside buildings - Part 10: Fire behaviour, quality control and installation |
|
DIN 19537-3 |
Prefabricated high density polyethylene (PE-HD) manholes for use in sewerage systems; dimensions and technical delivery conditions |
|
DIN 19538-10 |
Chlorinated polyvinyl chloride (PVC-C) pipes and fittings for hot water resistant drainage systems inside buildings - Part 10: Fire behaviour, quality control and installation |
|
DIN 19571-1 |
Curved class C 250 gully tops of size 500 x 500 - Part 1: Assembly |
|
DIN 19571-2 |
Curved class C 250 gully tops of size 500 x 500 - Part 2: Components |
|
DIN 19583-1 |
Classes C 250 and D 400 gully tops of size 500 x 500 - Part 1: Assembly |
|
DIN 19583-2 |
Classes C 250 and D 400 gully tops of size 500 x 500 - Part 2: Components |
|
DIN 19584-1 |
Class D 400 manhole tops - Part 1: Assembly |
|
DIN 19584-2 |
Class D 400 manhole tops - Part 2: Components |
|
DIN 19636 |
Water softeners for use in drinking water supply installations; requirements and testing (DVGW code of practice) |
|
DIN 19850-3 |
Fibre-cement manholes for use in sewerage systems; dimensions and technical delivery conditions |
|
DIN 1986-4 |
Site drainage systems - Part 4: Use of sewer pipes and fittings made of different materials |
|
DIN 1988-1 |
Drinking water supply systems; general (DVGW code of practice) |
|
DIN 1988-4 |
Drinking water supply systems; drinking water protection and drinking water quality control (DVGW code of practice) |
|
DIN 1988-5 |
Drinking water supply systems; pressure boosting and reduction (DVGW code of practice) |
|
DIN 1988-7 |
Codes of practice for drinking water installations (TRWI) - Part 7: Prevention of corrosion damage and calcareous deposit formation; DVGW code of practice |
|
DIN 1988-8 |
Drinking water supply systems; operation (DVGW code of practice) |
|
DIN 1996-1 |
Testing of Bituminous Materials for Road Building and Related Purposes; General, Synopsis and Indications Relating to the Evaluation of the Tests |
|
DIN 1996-10 |
Testing of bituminous materials for road building and related purposes; testing of behaviour of mix in respect of immersion in water |
|
DIN 1996-11 |
Testing of bituminous materials for road building and related purposes; Determination of Marshall stability and of Marshall flow value |
|
DIN 1996-13 |
Testing of asphalt; indentation testing using a flat-ended indentor pin |
|
DIN 1996-14 |
Testing of asphalt; determination of grading of mineral aggregate recovered from asphalt |
|
DIN 1996-15 |
Testing of Bituminous Materials for Road Building and Related Purposes; Determination of Softening Point in accordance with Wilhelmi |
|
DIN 1996-16 |
Testing of Bituminous Materials for Road Building and Related Purposes; Determination of Segregation Tendency |
|
DIN 1996-17 |
Testing of asphalt; determination of dimensional stability when heated (Nuessel deformation index) |
|
DIN 1996-18 |
Testing of asphalt; Herrmann falling ball test |
|
DIN 1996-19 |
Testing of asphalt; determination of extensibility and adhesion using a Rabe joint model |
|
DIN 1996-2 |
Testing of Bituminous Materials for Road Building and Related Purposes; Sampling |
|
DIN 1996-3 |
Testing of asphalt; sample preparation |
|
DIN 1996-4 |
Testing of asphalt; moulding of specimens from bituminous mixtures |
|
DIN 1996-5 |
Testing of bituminous materials for road building and related purposes; Determination of water content |
|
DIN 1996-6 |
Testing of asphalt; determination of binder content and recovery of binder |
|
DIN 1996-8 |
Testing of Bituminous Materials for Road Building and Related Purposes; Determination of Water Absorption |
|
DIN 1996-9 |
Testing of Bituminous Materials for Road Building and Related Purposes; Swelling Test |
|
DIN 2000 |
Guidelines for drawing up requirements for the design, construction, operation and maintenance of public drinking water supply systems (DVGW Code of practice) |
|
DIN 24100-1 |
Machines for the building and building material industries; mechanical comminution; concepts relating to materials processing |
|
DIN 24190 |
Rectangular ducting sections for use in air distribution systems - Lock-seamed or welded sheet steel ducting sections |
|
DIN 24191 |
Fittings for use in air distribution systems - Lock-seamed or welded sheet steel fittings |
|
DIN 272 |
Testing of magnesium oxychloride screeds |
|
DIN 2880 |
Cement mortar linings for cast iron pipes, steel pipes and steel fittings |
|
DIN 3266-1 |
Valves for drinking water installations on private premises; PN 10 pipe interrupters, pipe disconnectors, anti-vacuum valves |
|
DIN 3266-2 |
Valves for drinking water installations on private premises; PN 10 pipe interrupters, pipe disconnectors, anti-vacuum valves; testing |
|
DIN 32736 |
Facility management - Terminology and scope of services |
|
DIN 3475 |
Spheroidal graphite cast iron valves and fittings provided with internal corrosion protection by means of enamelling, for use in drinking water supply systems; requirements and testing |
|
DIN 3476 |
Corrosion protection of water valves and pipe fittings by epoxy powder or liquid epoxy resin linings - Requirements and testing |
|
DIN 3500 |
PN 10 piston type gate valves for use in drinking water supply systems |
|
DIN 4084 |
Subsoil; Calculations of terrain rupture and slope rupture |
|
DIN 4084 Beiblatt 1 |
Subsoil; Calculations of terrain rupture and slope rupture; Explanations |
|
DIN 4084 Beiblatt 2 |
Subsoil; calculations of terrain failure and slope failure; examples of calculation |
|
DIN 4103-1 |
Internal non-loadbearing partitions; requirements, testing |
|
DIN 4103-2 |
Internal non-loadbearing partitions; gypsum wallboard partitions |
|
DIN 4103-4 |
Internal non-loadbearing partitions; partitions with timber framing |
|
DIN 4107 |
Suboil; Settlement observations during and after construction of structures |
|
DIN 4123 |
Excavations, foundations and underpinning work adjacent to existing buildings |
|
DIN 4127 |
Earthworks and foundation engineering; diaphragm wall clays for supporting liquids; requirements, testing, supply, inspection |
|
DIN 4172 |
Modular Co-ordination in Building Construction |
|
DIN 4271-1 |
Class B 125 manhole tops - Assembly |
|
DIN 4271-2 |
Class B 125 manhole tops - Frames |
|
DIN 4271-3 |
Class B 125 manhole tops - Covers |
|
DIN 4301 |
Ferrous and non-ferrous metallurgical slag for civil engineering and building construction use |
|
DIN 43627-3 |
Recessed house connection boxes for HRC fuses of size 00 rated for 100 A/500 V and size 1 rated for 250 A/500 V |
|
DIN 45635-47 |
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; chimneys |
|
DIN 4753-10 |
Water heating installations for drinking water and service water; cathodic corrosion protection of uncoated steel vessels; requirements and testing |
|
DIN 4753-11 |
Water heaters and hot water systems for drinking and service water; indirect heat exchangers; requirements, testing and marking |
|
DIN 4753-6 |
Water heating installations for drinking water and service water; cathodic corrosion protection of enamelled steel containers; requirements and testing |
|
DIN 4799 |
Heating, ventilation and air-conditioning; testing of air distributions systems serving operating theatres |
|
DIN 4922-1 |
Steel Filter Pipes for Drilled Wells with Slot Perforation and Fisching (Butt Strap Joint) |
|
DIN 4922-2 |
Steel Filter Pipes for Drilled Wells with Screwed Connection DN 100 to DN 500 |
|
DIN 4922-3 |
Steel Filter Pipes for Drilled Wells; Flanged Connection, NW 500 to NW 1000 (Nominal Diameter 500 to 1000) |
|
DIN 4922-4 |
Steel water well filter pipes - Part 4: DN 100 to DN 500 pipe joint assemblies with joints resistant to axial thrust |
|
DIN 4926 |
DN 400 to DN 1200 steel well tops |
|
DIN 5034-2 |
Daylight in interiors; principles |
|
DIN 5034-3 |
Daylight in interiors - Part 3: Methods of calculation |
|
DIN 5035-2 |
Artificial lighting; recommended values for lighting parameters for indoor and outdoor workspaces |
|
DIN 51043 |
Trass; Requirements, Tests |
|
DIN 52024 |
Distillation of petroleum-fluxed bitumen |
|
DIN 52027 |
Testing of carbonaceous materials - Distillation of refined coal tars |
|
DIN 52096 |
Testing of fillers for road construction; testing the stiffening action of fillers on bitumen |
|
DIN 52104-2 |
Testing of natural stone; freeze-thaw cyclic test; method Z |
|
DIN 52123 |
Testing of bitumen and polymer bitumen sheeting and felts |
|
DIN 52128 |
Bituminous Roof Sheeting with Felt Core; Definition, Designation, Requirements |
|
DIN 52130 |
Bitumen roofing felt - Requirements and testing |
|
DIN 52131 |
Torch-on bitumen felt - Requirements and testing |
|
DIN 52132 |
Polymeric bitumen roofing felt - Requirements and testing |
|
DIN 52133 |
Torch-on polymeric bitumen felt - Requirements and testing |
|
DIN 52143 |
Bitumen roofing felt with glass fleece base; terms and definitions, designation, requirements |
|
DIN 52219 |
On-site measurement of noise emitted by water supply and drainage systems |
|
DIN 52251-2 |
Indirect methods of determining the frost resistance of roofing tiles; determination of water absorption |
|
DIN 52251-3 |
Indirect methods of determining the frost resistance of roofing tiles; determination of coefficient of impregnation |
|
DIN 52251-5 |
Indirect methods of determining the frost resistance of roofing tiles; determination of drying shrinkage and firing shrinkage |
|
DIN 52252-1 |
Testing the frost resistance of facing bricks and clinker blocks; freezing of single bricks on all sides |
|
DIN 52252-2 |
Testing the frost resistance of facing bricks and clinker blocks; freezing of bricks arranged in test blocks |
|
DIN 52271 |
Testing of mineral fibre insulating materials; Behaviour at elevated temperatures |
|
DIN 52274 |
Testing of mineral fibre insulating materials; determination of interlaminar tensile strength perpendicular to plane of insulating layer |
|
DIN 52450 |
Testing of inorganic non-metallic building materials; determination of shrinkage and expansion on small specimens |
|
DIN 52452-1 |
Testing of building sealants for compatibility with construction materials |
|
DIN 52452-2 |
Testing of construction sealants for compatibility with chemicals |
|
DIN 52455-1 |
Determining the adhesion/cohesion of building sealants after conditioning in standard atmospheres, water or at elevated temperature |
|
DIN 52455-3 |
Determination of adhesion/cohesion of construction sealants after exposure to artificial light |
|
DIN 52459 |
Testing of building sealants; determination of the water absorption of backfill material; retentive capacity |
|
DIN 52612-2 |
Tesing of thermal insulating materials; determination of thermal conductivity by means of the guarded hot plate apparatus; conversion of the measured values for building applications |
|
DIN 539-1 |
Screw plugs for traps for use with waste pipes - Part 1: Copper-zinc alloy screw plugs |
|
DIN 539-2 |
Screw plugs for traps for use with waste pipes - Part 2: Polypropylene (PP) screw plugs |
|
DIN 68121-1 |
Timber profiles for windows and window doors; dimensions, quality requirements |
|
DIN 68800-2 |
Wood preservation in building construction - Preventive structural measures |
|
DIN 7591 |
Water fittings for domestic installation; Screwed unions with flat gasket for hose connection on either side, designed for nominal pressure 10 |
|
DIN 7593 |
Water fittings for domestic installation; Screwed unions with gasket for connection to copper tube on either side, designed for nominal pressure 10 |
|
DIN EN 1008 |
Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
|
DIN EN 1024 |
Clay roofing tiles for discontinuous laying - Determination of geometric characteristics |
|
DIN EN 1054 |
Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints |
|
DIN EN 1168 |
Precast concrete products - Hollow core slabs |
|
DIN EN 1169 |
Precast concrete products - General rules for factory production control of glass-fibre reinforced cement |
|
DIN EN 1170-1 |
Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix by the 'Slump test' method |
|
DIN EN 1170-2 |
Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC by the 'Wash out test' |
|
DIN EN 1170-3 |
Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC |
|
DIN EN 1170-4 |
Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength by the 'Simplified bending test' method |
|
DIN EN 1170-5 |
Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength by the 'complete bending test' method |
|
DIN EN 1170-6 |
Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density |
|
DIN EN 1170-7 |
Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisture content |
|
DIN EN 12063 |
Execution of special geotechnical work - Sheet-pile walls |
|
DIN EN 12149 |
Wallcoverings in roll form - Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release |
|
DIN EN 12188 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterization of structural bonding agents |
|
DIN EN 12192-1 |
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar |
|
DIN EN 12192-2 |
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents |
|
DIN EN 12217 |
Doors - Operating forces - Requirements and classification |
|
DIN EN 12269-1 |
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the |
|
DIN EN 12269-2 |
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test |
|
DIN EN 12310-2 |
Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 12310-2 |
|
DIN EN 12316-2 |
Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastics and rubber sheets for roof waterproofing; English version of DIN EN 12316-2 |
|
DIN EN 12317-2 |
Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 12317-2 |
|
DIN EN 12354-6 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces |
|
DIN EN 12446 |
Chimneys - Components - Concrete outer wall elements |
|
DIN EN 12467 |
Fibre cement flat sheets - Product specification and test methods |
|
DIN EN 12591 |
Bitumen and bituminous binders - Specifications for paving grade bitumens; English version of DIN EN 12591 |
|
DIN EN 12597 |
(DRAFT) Bitumen and bituminous binders - Terminology; Trilingual version prEN12597:2006 |
|
DIN EN 12597 |
Bitumen and bituminous binders - Terminology; Trilingual version EN 12597:2000 |
|
DIN EN 12606-2 |
Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method by extraction; English version of DIN EN 12606-2 |
|
DIN EN 12615 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength |
|
DIN EN 12617-1 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) |
|
DIN EN 12617-2 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage |
|
DIN EN 12617-3 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents |
|
DIN EN 12617-4 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion |
|
DIN EN 12618-1 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility |
|
DIN EN 12618-2 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength |
|
DIN EN 12629-1 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements; English version of DIN EN 12629-1 |
|
DIN EN 12629-2 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines |
|
DIN EN 12629-3 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines |
|
DIN EN 12629-4 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4: Concrete roof tile making machines; English version of DIN EN 12629-4 |
|
DIN EN 12629-7 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products |
|
DIN EN 12629-8 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) |
|
DIN EN 12636 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete |
|
DIN EN 12637-1 |
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete |
|
DIN EN 12637-3 |
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers |
|
DIN EN 12666-1 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
|
DIN EN 12676-1 |
Anti-glare systems for roads - Part 1: Performance and characteristics (includes Amendment A1:2003) |
|
DIN EN 12676-2 |
Anti-glare systems for roads - Part 2: Test methods; English version ofDIN EN 12676-2 |
|
DIN EN 12699 |
Execution of special geotechnical work - Displacement piles; English version of DIN EN 12699 |
|
DIN EN 12715 |
Execution of special geotechnical work - Grouting; English version of DIN EN 12715 |
|
DIN EN 12716 |
Execution of special geotechnical works - Jet grouting; English version of DIN EN 12716 |
|
DIN EN 12737 |
Precast concrete products - Floor slats for livestock |
|
DIN EN 1279-2 |
Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration |
|
DIN EN 12794 |
Precast concrete products - Foundation piles |
|
DIN EN 12843 |
Precast concrete products - Masts and poles |
|
DIN EN 13043 |
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
|
DIN EN 13055-1 |
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout |
|
DIN EN 13057 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption |
|
DIN EN 13084-2 |
Free-standing chimneys - Part 2: Concrete chimneys; English version of DIN EN 13084-2 |
|
DIN EN 13084-7 |
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners |
|
DIN EN 13108-1 |
Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
|
DIN EN 13108-2 |
Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers |
|
DIN EN 13116 |
Curtain walling - Resistance to wind load - Performance requirements; English version of DIN EN 13116 |
|
DIN EN 13198 |
Precast concrete products - Street furniture and garden products |
|
DIN EN 13200-3 |
Spectator facilities - Part 3: Separating elements - Requirements |
|
DIN EN 13225 |
Precast concrete products - Linear structural elements |
|
DIN EN 1323 |
Adhesives for tiles - Concrete slabs for testing (includes Amendment A1:1998) |
|
DIN EN 13244-2 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes |
|
DIN EN 13244-5 |
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
|
DIN EN 13263-1 |
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria |
|
DIN EN 13263-2 |
Silica fume for concrete - Part 2: Conformity evaluation |
|
DIN EN 13286-49 |
Unbound and hydraulically bound mixtures - Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder |
|
DIN EN 13294 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time |
|
DIN EN 13295 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation |
|
DIN EN 13369 |
Common rules for precast concrete products |
|
DIN EN 13369/A1 |
Common rules for precast concrete products |
|
DIN EN 1337-10 |
Structural bearings - Part 10: Inspection and maintenance |
|
DIN EN 13375 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation |
|
DIN EN 1338 |
Concrete paving blocks - Requirements and test methods |
|
DIN EN 1338 Berichtigung 1 |
Concrete paving blocks - Requirements and test methods Corrigendum 1 to English version of DIN EN 1338:2003-08 |
|
DIN EN 13384-1 |
Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance |
|
DIN EN 1339 |
Concrete paving flags - Requirements and test methods |
|
DIN EN 1339 Berichtigung 1 |
Concrete paving flags - Requirements and test methods Corrigendum 1 to English version of DIN EN 1339:2003-08 |
|
DIN EN 13395-1 |
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 1: Test for flow of thixotropic mortars |
|
DIN EN 13395-2 |
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 2: Test for flow of grout or mortar |
|
DIN EN 13395-3 |
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 3: Test for flow of repair concrete |
|
DIN EN 13395-4 |
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 4: Application of repair mortar overhead |
|
DIN EN 1340 |
Concrete kerb units - Requirements and test methods |
|
DIN EN 1340 Berichtigung 1 |
Concrete kerb units - Requirements and test methods Corrigendum 1 to English version of DIN EN 1340:2003-08 |
|
DIN EN 13412 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression |
|
DIN EN 13416 |
Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling; English version of DIN EN 13416 |
|
DIN EN 1351 |
Determination of flexural strength of autoclaved aerated concrete |
|
DIN EN 1352 |
Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
|
DIN EN 13529 |
Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack |
|
DIN EN 1353 |
Determination of moisture content of autoclaved aerated concrete |
|
DIN EN 1354 |
Determination of compressive strength of lightweight aggregate concrete with open structure |
|
DIN EN 1355 |
Determination of creep strain under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
|
DIN EN 1356 |
Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load |
|
DIN EN 13566-2 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes |
|
DIN EN 13578 |
Products and systems for the protection and repair of concrete structure - Test method - Compatibility on wet concrete |
|
DIN EN 13579 |
Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation |
|
DIN EN 13580 |
Products and systems for the protection and repair of concrete structures - Test methods - Water absorption and resistance to alkali for hydrophobic impregnations |
|
DIN EN 13581 |
Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress |
|
DIN EN 13584 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products |
|
DIN EN 13596 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of bond strength |
|
DIN EN 13653 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of shear strength |
|
DIN EN 13687-1 |
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion |
|
DIN EN 13687-3 |
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact |
|
DIN EN 13687-4 |
Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 4: Dry thermal cycling |
|
DIN EN 13687-5 |
Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 5: Resistance to temperature shock |
|
DIN EN 13693 |
Precast concrete products - Special roof elements |
|
DIN EN 13733 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the durability of structural bonding |
|
DIN EN 13738 |
Geotextiles and geotextile-related products - Determination of pullout resistance in soil |
|
DIN EN 13863-1 |
Concrete pavements - Part 1: Test method for the determination of the thickness of a concrete pavement by survey method |
|
DIN EN 13863-2 |
Concrete pavements - Part 2: Test method for the determination of the bond between two layers |
|
DIN EN 13863-3 |
Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores |
|
DIN EN 13877-1 |
Concrete pavements - Part 1: Materials |
|
DIN EN 13877-2 |
Concrete pavements - Part 2: Functional requirements for concrete pavements |
|
DIN EN 13877-3 |
Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements |
|
DIN EN 13894-1 |
Products and systems for the protection and repair of concrete structures - Test methods; Determination of fatigue under dynamic loading - Part 1: During cure |
|
DIN EN 13894-2 |
Products and systems for the protection and repair of concrete structures - Test methods; Determination of fatigue under dynamic loading - Part 2: After hardening |
|
DIN EN 13978-1 |
Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions |
|
DIN EN 14117 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products |
|
DIN EN 14187-6 |
Cold applied joint sealants - Part 6: Test method for the determination of the adhesion/cohesion properties after immersion in chemicals liquids |
|
DIN EN 14199 |
Execution of special geotechnical works - Micropiles |
|
DIN EN 14216 |
Cement - Composition, specifications and conformity criteria for very low heat special cements |
|
DIN EN 14223 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption |
|
DIN EN 14224 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of crack bridging ability |
|
DIN EN 1428 |
Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method |
|
DIN EN 1433 |
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity |
|
DIN EN 14388 |
Road traffic noise reducing devices - Specifications |
|
DIN EN 14437 |
Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system test method |
|
DIN EN 14474 |
Precast concrete products - Concrete with woodchips as aggregate - Requirements and test methods |
|
DIN EN 14487-1 |
Sprayed concrete - Part 1: Definitions, specifications and conformity |
|
DIN EN 14487-2 |
Sprayed concrete - Part 2: Execution |
|
DIN EN 14488-1 |
Testing sprayed concrete - Part 1: Sampling fresh and hardened concrete |
|
DIN EN 14488-2 |
Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete |
|
DIN EN 14488-3 |
Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens |
|
DIN EN 14488-4 |
Testing sprayed concrete - Part 4: Bond strength of cores by direct tension |
|
DIN EN 14488-5 |
Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens |
|
DIN EN 14488-6 |
Testing sprayed concrete - Part 6: Thickness of concrete on a substrate |
|
DIN EN 14488-7 |
Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete |
|
DIN EN 14497 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability |
|
DIN EN 14498 |
Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles |
|
DIN EN 1456-1 |
Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for piping components and the system; English version of DIN EN 1456-1 |
|
DIN EN 14600 |
Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification |
|
DIN EN 14630 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method |
|
DIN EN 14649 |
Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST) |
|
DIN EN 14650 |
Precast concrete products - General rules for factory production control of metallic fibered concrete |
|
DIN EN 14651 |
Test method for metallic fibered concrete - Measuring the flexural tensile stength (limit of proportionality (LOP), residual) |
|
DIN EN 14652 |
Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing |
|
DIN EN 14679 |
Execution of special geotechnical works - Deep mixing |
|
DIN EN 14688 |
Sanitary appliances - Wash basins - Functional requirements and test methods |
|
DIN EN 14692 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer |
|
DIN EN 14693 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt |
|
DIN EN 14694 |
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment |
|
DIN EN 14721 |
Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete |
|
DIN EN 14731 |
Execution of special geotechnical works - Ground treatment by deep vibration |
|
DIN EN 14845-2 |
Test methods for fibres in concrete - Part 2: Effect on concrete |