|
DIN EN 14889-1 |
Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity |
|
DIN EN 1504-1 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions |
|
DIN EN 1504-10 Berichtigung 1 |
Products and systems for the protection and repair of concrete structures - Definitions, Requirements, Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works Corrigendum 1 to English version of DIN EN 1504-10:2004-05 |
|
DIN EN 1504-2 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
|
DIN EN 1504-3 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
|
DIN EN 1504-4 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding |
|
DIN EN 1504-5 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection |
|
DIN EN 1504-6 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar |
|
DIN EN 1504-7 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
|
DIN EN 15167-1 |
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria |
|
DIN EN 15167-2 |
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Confomity evaluation |
|
DIN EN 15183 |
Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |
|
DIN EN 15184 |
Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) |
|
DIN EN 1520 |
Prefabricated reinforced components of lightweight aggregate concrete with open structure (includes corrigendum AC:2003) |
|
DIN EN 1521 |
Determination of flexural strength of lightweight aggregate concrete with open structure |
|
DIN EN 15221-1 |
Facility Management - Part 1: Terms and definitions |
|
DIN EN 1536 |
Execution of special geotechnical work - Bored piles; German version EN 1536:1999 |
|
DIN EN 1543 |
Products and systems for the production and repair of concrete structures - Test methods - Determination of tensile strength development for polymers |
|
DIN EN 1544 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars |
|
DIN EN 1610 |
Construction and testing of drains and sewers |
|
DIN EN 1737 |
Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1737:1998 |
|
DIN EN 1738 |
Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete; German version EN 1738:1998 |
|
DIN EN 1739 |
Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1739:1998 |
|
DIN EN 1740 |
Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components); German version EN 1740:1998 |
|
DIN EN 1741 |
Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1741:1998 |
|
DIN EN 1742 |
Determination of shear strength between different layers or multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1742:1998 |
|
DIN EN 1766 |
Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing; English version of DIN EN 1766 |
|
DIN EN 1770 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion |
|
DIN EN 1790 |
Road marking materials - Preformed road markings |
|
DIN EN 1858 |
Chimneys - Components - Concrete flue blocks |
|
DIN EN 1873 |
Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods |
|
DIN EN 1881 |
Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method |
|
DIN EN 1906 |
Building hardware - Lever handles and knob furniture - Requirements and test methods; English version of DIN EN 1906 |
|
DIN EN 1916 Berichtigung 1 |
Corrigenda to DIN EN 1916:2003-04 |
|
DIN EN 197-1 |
Cement - Part 1: Composition, specifications and conformity criteria for common cements (includes Amendment A1:2004) |
|
DIN EN 197-4 |
Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements |
|
DIN EN 1990/A1 |
Eurocode: Basis of structural design |
|
DIN EN 1992-1-2 |
Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design |
|
DIN EN 1992-2 |
Eurocode 2: Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules |
|
DIN EN 1992-3 |
Eurocode 2: Design of concrete structures - Part 3: Liquid retaining and containment structures |
|
DIN EN 1993-1-1 |
Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings |
|
DIN EN 1993-1-10 |
Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties |
|
DIN EN 1993-1-8 |
Eurocode 3: Design of steel structures - Part 1-8: Design of joints |
|
DIN EN 1994-1-1 |
Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings |
|
DIN EN 1994-1-2 |
Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design |
|
DIN EN 1994-2 |
Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges |
|
DIN EN 1996-1-1 |
Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
|
DIN EN 1997-1 |
Eurocode 7: Geotechnical design - Part 1: General rules |
|
DIN EN 1998-3 |
Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings |
|
DIN EN 1998-4 |
Eurocode 8: Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines |
|
DIN EN 259-2 |
Wallcoverings in roll form - Heavy duty wallcoverings - Part 2: Determination of impact resistance; English version of DIN EN 259-2 |
|
DIN EN 413-2 |
Masonry cement - Part 2: Test methods |
|
DIN EN 480-14 |
Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test |
|
DIN EN 480-2 |
Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time |
|
DIN EN 502 |
Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
|
DIN EN 508-1 |
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel; English version of DIN EN 508-1 |
|
DIN EN 508-2 |
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium; English version of DIN EN 508-2 |
|
DIN EN 607 |
Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
|
DIN EN 74-1 |
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures |
|
DIN EN 752-6 |
Drain and sewer systems outside buildings - Part 6: Pumping installations |
|
DIN EN 772-10 |
Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units |
|
DIN EN 772-11 |
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units (includes amendment A1:2004) |
|
DIN EN 80 |
Wall-hung urinals - Connecting dimensions; English version of DIN EN 80 |
|
DIN EN 805 |
Water supply - Requirements for systems and components outside buildings; English version of DIN EN 805 |
|
DIN EN 989 |
Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the 'push-out' test |
|
DIN EN ISO 10077-1 |
Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2006) |
|
DIN EN ISO 11654 |
Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
|
DIN EN ISO 12567-1 |
Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 1: Complete windows and doors (ISO 12567-1:2000); English version of DIN EN ISO 12567-1 |
|
DIN EN ISO 12944-2 |
Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:1998) |
|
DIN EN ISO 12944-7 |
Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:1998) |
|
DIN EN ISO 13790 |
Thermal performance of buildings - Calculation of energy use for space heating (ISO 13790:2004) |
|
DIN EN ISO 140-1 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission (ISO 140-1:1997 + AM 1:2004) (includes Amendment 1:2004) |
|
DIN EN ISO 14688-1 |
Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2002) |
|
DIN EN ISO 14688-2 |
Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification (ISO 14688-2:2004) |
|
DIN EN ISO 14689-1 |
Geotechnical investigation and testing - Identification and classification of rock - Part 1: Identification and description (ISO 14689-1:2003) |
|
DIN EN ISO 717-1 |
Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:1996 + AM1:2006) |
|
DIN EN ISO 9046 |
Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002) |
|
DIN 18203-2 |
Tolerances for building - Part 2: Prefabricated steel components |
|
DIN 18299 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - General rules applying to all types of construction work |
|
DIN 18300 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Earthworks |
|
DIN 18301 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Drilling work |
|
DIN 18302 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Borehole sinking operations |
|
DIN 18307 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Laying of pressure pipework outside buildings |
|
DIN 18311 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Dredging work |
|
DIN 18320 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Landscape work |
|
DIN 18322 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Underground cable laying work |
|
DIN 18330 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Masonry work |
|
DIN 18334 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Carpentry |
|
DIN 18338 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Roofing work |
|
DIN 18350 |
Construction contract procedures (VOB) - Part C: General technical specifications for construction contracts (ATV) - Plastering and rendering |
|
DIN 18351 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Work on back-ventilated curtain walling |
|
DIN 18352 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Wall and floor tiling |
|
DIN 18353 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Laying of floor screed |
|
DIN 18355 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Joinery |
|
DIN 18356 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Laying of parquet flooring |
|
DIN 18358 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of roller shutters and similar equipment |
|
DIN 18363 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Painting and coating work |
|
DIN 18364 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Corrosion protection of steel structures |
|
DIN 18365 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Flooring work |
|
DIN 18366 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Application of decorative coverings on walls and ceilings |
|
DIN 18379 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of air conditioning systems |
|
DIN 18380 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of central heating systems and hot water supply systems |
|
DIN 18381 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Installation of gas, water and drainage pipework inside buildings |
|
DIN 18386 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Building automation and control systems |
|
DIN 18421 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Insulation of service installations |
|
DIN 18451 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts - Scaffolding work |
|
DIN 18459 |
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Demolition and dismantling work |
|
DIN 1961 |
Construction contract procedures (VOB) - Part B: General conditions of contract relating to the execution of construction work |
|
DIN 30750 |
Mobile, non-sewer-connected toilet cabins - Requirements and services relating to the deployment of cabins and sanitary products |
|
DIN EN 1004 |
Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements |
|
DIN EN 101 |
Ceramic tiles; determination of scratch hardness of surface according to Mohs; german version EN 101:1991 |
|
DIN EN 1015-12 |
Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates; English version of DIN EN 1015-12 |
|
DIN EN 1015-17 |
Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars |
|
DIN EN 1015-18 |
Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar |
|
DIN EN 1015-21 |
Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates |
|
DIN EN 1015-7 |
Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar |
|
DIN EN 1026 |
Windows and doors - Air permeability - Test method; English version of DIN EN 1026 |
|
DIN EN 1027 |
Windows and doors - Watertightness - Test method; English version of DIN EN 1027 |
|
DIN EN 1052-1 |
Methods of test for masonry - Part 1: Determination of compressive strength |
|
DIN EN 1052-2 |
Methods of test for masonry - Part 2: Determination of flexural strength |
|
DIN EN 1052-4 |
Methods of test for masonry - Part 4: Determination of shear strength including damp-proof course; English version of DIN EN 1052-4 |
|
DIN EN 1052-5 |
Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method |
|
DIN EN 1065 |
Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests |
|
DIN EN 1074-1 |
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements; English version of DIN EN 1074-1 |
|
DIN EN 1091 |
Vacuum sewerage systems outside buildings |
|
DIN EN 1097-10 |
Tests for mechanical and physical properties of aggregates - Part 10: Determination of the water suction height |
|
DIN EN 1097-2 |
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
|
DIN EN 1097-4 |
Testing for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler |
|
DIN EN 1097-5 |
Testing for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
|
DIN EN 1097-6 |
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
|
DIN EN 1097-7 |
Testing for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method |
|
DIN EN 1097-8 |
Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value |
|
DIN EN 1097-9 |
Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test (includes Amendment A1:2005) |
|
DIN EN 1107-1 |
Flexible sheets for waterproofing - Determination of dimensional stability - Part 1: Bitumen sheets for roof waterproofing |
|
DIN EN 1107-2 |
Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1107-2 |
|
DIN EN 1108 |
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes |
|
DIN EN 1109 |
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature |
|
DIN EN 111 |
Wall-hung hand rinse basins - Connecting dimensions |
|
DIN EN 1110 |
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature |
|
DIN EN 1111 |
Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification |
|
DIN EN 1112 |
Shower outlets for (PN 10) sanitary tapware; German version EN 1112:1997 |
|
DIN EN 1113 |
Showers hoses for (PB 10) sanitary tapware; German version EN 1113:1997 |
|
DIN EN 1121 |
Doors - Behaviour between two different climates - Test method; English version of DIN EN 1121 |
|
DIN EN 1123-2 |
Pipes and fittings of longitudinal welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions |
|
DIN EN 1123-2 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions |
|
DIN EN 1148 |
Water to water heat exchangers for district heating - Test procedures for establishing the performance data |
|
DIN EN 1148/A1 |
Heat exchangers - Water to water heat exchangers for district heating - Test procedures for establishing the performance data |
|
DIN EN 115 |
Safety rules for the construction and installation of escalators and passenger conveyors (includes Amendment A1:1998) |
|
DIN EN 115/A2 |
Safety rules for the construction and installation of escalators and passenger conveyors |
|
DIN EN 1191 |
Windows and doors - Resistance to repeated opening and closing - Test method; English version of DIN EN 1191 |
|
DIN EN 1192 |
Doors - Classification of strength requirements; English version of DIN EN 1192 |
|
DIN EN 1194 |
Timber structures - Glued laminated timber - Strength classes and determination of characteristic values |
|
DIN EN 1195 |
Timber structures - Test methods - Performance of structural floor decking |
|
DIN EN 12001 |
Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
|
DIN EN 12002 |
Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts |
|
DIN EN 12004 |
Adhesives for tiles - Definitions and specifications (includes amendment A1:2002) |
|
DIN EN 12015 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission |
|
DIN EN 12016 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
|
DIN EN 12039 |
Flexible sheets for waterproofing - Bitumen s for roof waterproofing - Determination of adhesion of granules |
|
DIN EN 12045 |
Shutters and blinds, power-operated - Safety in use - Measurement of the transmitted force; English version of DIN EN 12045 |
|
DIN EN 12046-1 |
Operating forces - Test method - Part 1: Windows |
|
DIN EN 12046-2 |
Operating forces - Test method - Part 2: Doors; English version of DIN EN 12046-2 |
|
DIN EN 12050-1 |
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter; English version of DIN EN 12050-1 |
|
DIN EN 12050-2 |
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater; English version of DIN EN 12050-2 |
|
DIN EN 12050-3 |
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications; English version of DIN EN 12050-3 |
|
DIN EN 12050-4 |
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter; English version of DIN EN 12050-4 |
|
DIN EN 12051 |
Building hardware - Door and window bolts - Requirements and test methods |
|
DIN EN 12056-1 |
Gravity drainage systems inside buildings - Part 1: General and performance requirements; English version of DIN EN 12056-1 |
|
DIN EN 12056-2 |
Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation; English version of DIN EN 12056-2 |
|
DIN EN 12056-3 |
Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation; English version of DIN EN 12056-3 |
|
DIN EN 12056-4 |
Gravity drainage systems inside buildings - Part 4: Waste water lifting plants; Layout and calculation; English version of DIN EN 12056-4 |
|
DIN EN 12056-5 |
Gravity drainage systems inside buildings - Part 5: Installation and testing, instructions for operation, maintenance and user; English version of DIN EN 12056-5 |
|
DIN EN 12057 |
Natural stone products - Modular tiles - Requirements |
|
DIN EN 12058 |
Natural stone products - Slabs for floors and stairs - Requirements |
|
DIN EN 12085 |
Thermal insulating products for building applications - Determination of linear dimensions of test specimens |
|
DIN EN 12086 |
Thermal insulating products for building applications - Determination of water vapour transmission properties |
|
DIN EN 12088 |
Thermal insulating products for building applications - Determination of long-term water absorption by diffusion |
|
DIN EN 12090 |
Thermal insulating products for building applications - Determination of shear behaviour |
|
DIN EN 12091 |
Thermal insulating products for building applications - Determination of freeze-thaw resistance |
|
DIN EN 12095 |
Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength |
|
DIN EN 12097 |
Ventilation for buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems |
|
DIN EN 12098-1 |
Controls for heating systems - Part 1: Outside temperature compensated control equipment for hot water heating systems |
|
DIN EN 12098-2 |
Controls for heating systems - Part 2: Optimum start-stop control equipment for hot water heating systems; English version of DIN EN 12098-2 |
|
DIN EN 12098-5 |
Controls for heating systems - Part 5: Start-stop schedulers for heating systems |
|
DIN EN 12109 |
Vacuum drainage systems inside buildings |
|
DIN EN 12110 |
Tunnelling machines - Air locks - Safety requirements |
|
DIN EN 12111 |
Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements |
|
DIN EN 12114 |
Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method; English version of DIN EN 12114 |
|
DIN EN 12152 |
Curtain walling - Air permeability - Performance requirements and classification |
|
DIN EN 12153 |
Curtain walling - Air permeability - Test methods; English version of DIN EN 12153 |
|
DIN EN 12154 |
Curtain walling - Watertightness - Performance requirements and classification; English version of DIN EN 12154 |
|
DIN EN 12155 |
Curtain walling - Watertightness - Laboratory test under static pressure; English version of DIN EN 12155 |
|
DIN EN 12158-1 |
Builders' hoists for goods - Part 1: Hoists with accessible platforms; English version of DIN EN 12158-1 |
|
DIN EN 12158-2 |
Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices; English version of DIN EN 12158-2 |
|
DIN EN 12159 |
Builders' hoists for persons and materials with vertically guided cages; English version of DIN EN 12159 |
|
DIN EN 12170 |
Heating systems in buildings - Procedure for the preparation of document in respect of operation, maintenance and use - Heating systems requiring a trained operator |
|
DIN EN 12171 |
Heating systems in buildings - Procedure for the preparation of document for operation, maintenance and use - Heating systems not requiring a trained operator |
|
DIN EN 12193 |
Light and lighting - Sports lighting |
|
DIN EN 12194 |
Shutters, external and internal blinds - Misuse - Test methods; English version of DIN EN 12194 |
|
DIN EN 12201-1 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General |
|
DIN EN 12201-2 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 2: Pipes |
|
DIN EN 12201-3 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings |
|
DIN EN 12201-4 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves; English version of DIN EN 12201-4 |
|
DIN EN 12201-5 |
Plastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
|
DIN EN 12207 |
Windows and doors - Air permeability - Classification; English version of DIN EN 12207 |
|
DIN EN 12209 |
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods |
|
DIN EN 12209 Berichtigung 1 |
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods; Corrigenda 1 to DIN EN 12209:2004-03 |
|
DIN EN 12210 |
Windows and doors - Resistance to wind load - Classification (includes Corrigendum AC:2002) |
|
DIN EN 12211 |
Windows and doors - Resistance to wind load - Test method; English version of DIN EN 12211 |
|
DIN EN 12216 |
Shutters, external blinds, internal blinds - Terminology, glossary and definitions; Trilingual version EN 12216:2002 |
|
DIN EN 12219 |
Doors - Climatic influences - Requirements and classification; English version of DIN EN 12219 |
|
DIN EN 12220 |
Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation |
|
DIN EN 12236 |
Ventilation for buildings - Ductwork hangers and supports - Requirements for strength; English version of DIN EN 12236 |
|
DIN EN 12237 |
Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts |
|
DIN EN 12239 |
Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications; English version of DIN EN 12239 |
|
DIN EN 12261 |
Gas meters - Turbine gas meters |
|
DIN EN 12271 |
Surface dressing - Requirements |
|
DIN EN 12272-1 |
Surface dressing - Test methods - Part 1: Rate of spread and accuracy of spread of binder and chippings |
|
DIN EN 12272-2 |
Surface dressing - Test methods - Part 2: Visual assessment of defects |
|
DIN EN 12272-3 |
Surface dressing - Test methods - Part 3: Determination of binder aggregate adhesivity by the vialit plate shock test method |
|
DIN EN 12274-1 |
Slurry surfacing - Test methods - Part 1: Sampling for binder extraction; English version of DIN EN 12274-1 |
|
DIN EN 12274-2 |
Slurry surfacing - Test methods - Part 2: Determination of residual binder content |
|
DIN EN 12274-3 |
Slurry surfacing - Test method - Part 3: Consistency; English version of DIN EN 12274-3 |
|
DIN EN 12274-4 |
Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix |
|
DIN EN 12274-5 |
Slurry surfacing - Test method - Part 5: Determination of wearing |
|
DIN EN 12274-6 |
Slurry surfacing - Test methods - Part 6: Rate of application; English of DIN EN 12274-6 |
|
DIN EN 12274-7 |
Slurry surfacing - Part 7: Shaking abrasion test |
|
DIN EN 12274-8 |
Slurry surfacing - Test methods - Part 8: Visual assessment of defects |
|
DIN EN 12279 |
Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements |
|
DIN EN 12309-1 |
Gas-fired absorption and adsorption air conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 1: Safety |
|
DIN EN 12309-2 |
Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW - Part 2: Rational use of energy; English version of DIN EN 12309-2 |
|
DIN EN 12310-1 |
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of resistance to tearing (nail shank) |
|
DIN EN 12311-1 |
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties |
|
DIN EN 12311-2 |
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 12311-2 |
|
DIN EN 12316-1 |
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints |
|
DIN EN 12317-1 |
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints |
|
DIN EN 12320 |
Building hardware - Padlocks and padlock fittings - Requirements and test methods; English version of DIN EN 12320 |
|
DIN EN 12326-2 |
Slate and stone products for discontinuous roofing and cladding - Part 2: Methods of test |
|
DIN EN 12327 |
Gas supply systems - Pressure testing, commissioning and decomissioning procedures - Functional requirements; English version of DIN EN 12327 |
|
DIN EN 12336 |
Tunneling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements |
|
DIN EN 12337-1 |
Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description; English version of DIN EN 12337-1 |
|
DIN EN 12352 |
Traffic control equipment - Warning and safety light devices |
|
DIN EN 12354-1 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms; English version of DIN EN 12354-1 |
|
DIN EN 12354-2 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms; English version of DIN EN 12354-2 |
|
DIN EN 12354-3 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound; English version of DIN EN 12354-3 |
|
DIN EN 12354-4 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of products - Part 4: Transmission of indoor sound to the outside; English version of DIN EN 12354-4 |
|
DIN EN 12365-1 |
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification |
|
DIN EN 12365-2 |
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods |
|
DIN EN 12365-3 |
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method |
|
DIN EN 12365-4 |
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method |
|
DIN EN 12368 |
Traffic control equipment - Signal heads |
|
DIN EN 12370 |
Natural stone test methods - Determination of resistance to salt crystallization |
|
DIN EN 12371 |
Natural stone test methods - Determination of frost resistance; English version of DIN EN 12371 |
|
DIN EN 12372 |
Natural stone test methods - Determination of flexural strength under concentrated load |
|
DIN EN 12372 |
Natural stone test methods - Determination of flexural strength under concentrated load |
|
DIN EN 12380 |
Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity |
|
DIN EN 12391-1 |
Chimneys - Execution standard for metal chimneys - Part 1: Chimneys for non-roomsealed heating appliances |
|
DIN EN 124 |
Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking and quality control |
|
DIN EN 12400 |
Windows and pedestrian doors - Mechanical durability - Requirements and classification |
|
DIN EN 12405-1 |
Gas meters - Conversion devices - Part 1: Volume conversion |
|
DIN EN 12412-2 |
Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames |
|
DIN EN 12412-4 |
Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 4: Roller shutter boxes |
|
DIN EN 12418 |
Masonry and stone cutting-off machines for job site - Safety; English version of DIN EN 12418 |
|
DIN EN 12424 |
Industrial, commercial and garage doors and gates - Resistance to wind load - Classification; English version of DIN EN 12424 |
|
DIN EN 12425 |
Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification; English version of DIN EN 12425 |
|
DIN EN 12426 |
Industrial, commercial and garage doors and gates - Air permeability - Classification; English version of DIN EN 12426 |
|
DIN EN 12427 |
Industrial, commercial and garage doors and gates - Air permeability - Test method; English version of DIN EN 12427 |
|
DIN EN 12428 |
Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation; English version of DIN EN 12428 |
|
DIN EN 12429 |
Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions |
|
DIN EN 12433-1 |
Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors; Trilingual version EN 12433-1:1999 |
|
DIN EN 12433-2 |
Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors; Trilingual version EN 12433-2:1999 |
|
DIN EN 12444 |
Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation; English version of DIN EN 12444 |
|
DIN EN 12445 |
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods; English version of DIN EN 12445 |
|
DIN EN 12453 |
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements; English version of DIN EN 12453 |
|
DIN EN 12464-1 |
Light and lighting - Lighting of work places - Part 1: Indoor work places |
|
DIN EN 12480 |
Gas meters - Rotary displacement gas meters |
|
DIN EN 12489 |
Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method; English version of DIN EN 12489 |
|
DIN EN 12502-1 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General |
|
DIN EN 12502-2 |
Protection of metallic against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys |
|
DIN EN 12502-3 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot-dip galvanised ferrous materials |
|
DIN EN 12502-4 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels |
|
DIN EN 12502-5 |
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyd steels |
|
DIN EN 12512 |
Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners |
|
DIN EN 12519 |
Windows and pedestrian doors - Terminology; Trilingual version EN 12519:2004 |
|
DIN EN 12524 |
Building materials and products - Hygrothermal properties - Tabulated design values; English version of DIN EN 12524 |
|
DIN EN 1253-1 |
Gullies for buildings - Part 1: Requirements |
|
DIN EN 1253-2 |
Gullies for buildings - Part 2: Test methods |
|
DIN EN 1253-3 |
Gullies for buildings - Part 3: Quality control |
|
DIN EN 1253-4 |
Gullies for buildings - Part 4: Access covers; English version of DIN EN 1253-4 |
|
DIN EN 1253-5 |
Gullies for buildings - Part 5: Gullies with light liquids closure |
|
DIN EN 12541 |
Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10 |
|
DIN EN 12589 |
Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate; English version of DIN EN 12589 |
|
DIN EN 12599 |
Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems; English version of DIN EN 12599 |
|
DIN EN 12600 |
Glass in building - Pendulum tests - Impact test method and classification for flat glass |
|
DIN EN 12604 |
Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements; English version of DIN EN 12604 |
|
DIN EN 12605 |
Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods; English version of DIN EN 12605 |
|
DIN EN 12608 |
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods |
|
DIN EN 12620 Berichtigung 1 |
Corrigenda to DIN EN 12620:2003-04 |
|
DIN EN 12629-5-1 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis |
|
DIN EN 12629-5-2 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis |