|
DIN EN 13468 |
Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water-soluble chloride, fluoride, silicate, and sodium ions and pH; English version of DIN EN 13468 |
|
DIN EN 13469 |
Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation; English version of DIN EN 13469 |
|
DIN EN 1347 |
Adhesives for tiles - Determination of wetting capability (includes Amendment A1:1998) |
|
DIN EN 13470 |
Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation; English version of DIN EN 13470 |
|
DIN EN 13471 |
Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion; GEnglish version of DIN EN 13471 |
|
DIN EN 13472 |
Thermal insulating products for building equipment and industrial installations - Determination of short-term water absorption by partial immersion of preformed pipe insulation; English version of DIN EN 13472 |
|
DIN EN 1348 |
Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives (includes Amendment A1:1998) |
|
DIN EN 13491 |
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures |
|
DIN EN 13492 |
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
|
DIN EN 13493 |
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites |
|
DIN EN 13494 |
Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material |
|
DIN EN 13495 |
Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test) |
|
DIN EN 13497 |
Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS) |
|
DIN EN 13498 |
Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS) |
|
DIN EN 13499 |
Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification |
|
DIN EN 13500 |
Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification |
|
DIN EN 13502 |
Chimneys - Requirements and test methods for clay/ceramic flue terminals |
|
DIN EN 13508-1 |
Condition of drain and sewer systems outside buildings - Part 1: General requirements |
|
DIN EN 13508-2 |
Conditions of drain and sewer systems outside buildings - Part 2: Visual inspection coding system |
|
DIN EN 13524 |
Highway maintenance machines - Safety requirements |
|
DIN EN 13527 |
Shutters and blinds - Measurement of operating force - Test methods; English version of DIN EN 13527 |
|
DIN EN 13558 |
Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes |
|
DIN EN 13559 |
Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes |
|
DIN EN 13561 |
External blinds - Performance requirements including safety |
|
DIN EN 13564-1 |
Anti-flooding devices for buildings - Part 1: Requirements |
|
DIN EN 13564-2 |
Anti-flooding devices for buildings - Part 2: Test methods |
|
DIN EN 13564-3 |
Anti-flooding devices for buildings - Part 3: Quality assurance |
|
DIN EN 13566-1 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General |
|
DIN EN 13566-3 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes |
|
DIN EN 13566-4 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes |
|
DIN EN 13583 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance; English version of DIN EN 13583 |
|
DIN EN 13587 |
Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method |
|
DIN EN 13588 |
Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test |
|
DIN EN 13589 |
Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method |
|
DIN EN 13598-1 |
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers |
|
DIN EN 13614 |
Bitumen and bituminous binders - Determination of adhesivity of bitumen emulsions by water immersion test - Aggregate method |
|
DIN EN 13632 |
Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen |
|
DIN EN 13639 |
Determination of total organic carbon in limestone |
|
DIN EN 13639 Berichtigung 1 |
Determination of total organic carbon in limestone, Corrigendum 1 to DIN EN 13639:2002-07 |
|
DIN EN 13658-2 |
Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering |
|
DIN EN 13659 |
Shutters - Performance requirements including safety |
|
DIN EN 1367-2 |
Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test; German version EN 1367-2:1998 |
|
DIN EN 1367-3 |
Tests for thermal and weathering properties of aggregates - Part 3: Boiling test for |
|
DIN EN 1367-4 |
Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage; German version EN 1367-4:1998 |
|
DIN EN 13674-1 |
Railway applications - Track; Rail - Part 1: Vignole railway rails 46 kg/m and above |
|
DIN EN 13674-2 |
Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
|
DIN EN 13674-3 |
Railway applications - Track - Rail - Part 3: Check rails |
|
DIN EN 1367-5 |
Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
|
DIN EN 13702-1 |
Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Part 1: Cone and plate method |
|
DIN EN 13702-2 |
Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Part 2: Coaxial cylinders method |
|
DIN EN 13703 |
Bitumen and bituminous binders - Determination of deformation energy |
|
DIN EN 13707 |
Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics (includes Amendment A1:2006) |
|
DIN EN 13719 |
Geotextiles and geotextile-related products - Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers |
|
DIN EN 13719 Berichtigung 1 |
Geotextiles and geotextile-related products - Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers; Corrigenda to DIN EN 13719:2002-12 |
|
DIN EN 13747 |
Precast concrete products - Floor plates for floor systems (includes Corrigendum AC:2006) |
|
DIN EN 13748-1 |
Terrazzo tiles - Part 1: Terrazzo tiles for internal use |
|
DIN EN 13748-2 |
Terrazzo tiles - Part 2: Terrazzo tiles for external use |
|
DIN EN 13755 |
Natural stone test methods - Determination of water absorption at atmospheric pressure; English version of DIN EN 13755 |
|
DIN EN 13755 Berichtigung 1 |
Corrigenda to DIN EN 13755:2002-03 |
|
DIN EN 13779 |
Ventilation for non-residental buildings - Performance requirements for ventilation and room-conditioning systems |
|
DIN EN 13782 |
Temporary structures - Tents - Safety |
|
DIN EN 13793 |
Thermal insulating products for building applications - Determination of behaviour under cyclic loading |
|
DIN EN 1380 |
Timber structures - Test methods - Loadbearing nailed joints; English version of DIN EN 1380 |
|
DIN EN 13808 |
Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions |
|
DIN EN 1381 |
Timber structures - Test methods - Loadbearing stapled joints; English version of DIN EN 1381 |
|
DIN EN 13813 |
Screed material and floor screeds - Screed materials - Properties and requirements |
|
DIN EN 13814 |
Fairground and amusement park machinery and structures - Safety |
|
DIN EN 13815 |
Fibrous gypsum plaster casts - Definitions, requirements and test methods |
|
DIN EN 1382 |
Timber structures - Test methods - Withdrawal capacity of timber fasteners; English version of DIN EN 1382 |
|
DIN EN 13820 |
Thermal insulating materials for building applications - Determination of organic content |
|
DIN EN 13823 |
Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
|
DIN EN 13829 |
Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:1996, modified); English version of DIN EN 13829 |
|
DIN EN 1383 |
Timber structures - Test methods - Pull-through resistance of timber fasteners; English version of DIN EN 1383 |
|
DIN EN 13830 |
Curtain walling - Product standard |
|
DIN EN 13848-1 |
Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry |
|
DIN EN 13848-2 |
Railway applications - Track - Track geometry quality - Part 2: Measuring systems - Track recording vehicles |
|
DIN EN 13851 |
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of flexural and compressive strength |
|
DIN EN 13859-1 |
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing |
|
DIN EN 13859-2 |
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls |
|
DIN EN 13862 |
Floor cutting-off machines - Safety; English version of DIN EN 13862 |
|
DIN EN 13872 |
Method of test for smoothing and/or levelling compounds - Determination of shrinkage |
|
DIN EN 13872 Berichtigung 1 |
Corrigenda to DIN EN 13872:2004-04 |
|
DIN EN 13880-1 |
Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C |
|
DIN EN 13880-10 |
Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression |
|
DIN EN 13880-11 |
Hot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements |
|
DIN EN 13880-13 |
Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test) |
|
DIN EN 13880-2 |
Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 °C |
|
DIN EN 13880-3 |
Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience) |
|
DIN EN 13880-4 |
Hot applied joint sealants - Part 4: Test method for the determination of heat resistance; Change in penetration value |
|
DIN EN 13880-5 |
Hot applied joint sealants - Part 5: Test method for the determination of flow resistance |
|
DIN EN 13880-6 |
Hot applied joint sealants - Part 6: Test method for the preparation of samples for testing |
|
DIN EN 13880-7 |
Hot applied joint sealants - Part 7: Function testing of joint sealants |
|
DIN EN 13880-8 |
Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion |
|
DIN EN 13880-9 |
Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements |
|
DIN EN 13888 |
Grouts for tiles - Definitions and specifications |
|
DIN EN 13892-1 |
Methods of test for screed materials - Part 1: Sampling, making and curing specimens for testing |
|
DIN EN 13892-2 |
Methods of test for screed materials - Part 2: Determination of flexural and compressive strength |
|
DIN EN 13892-3 |
Methods of test for screed materials - Part 3: Determination of wear resistance (Boehme) |
|
DIN EN 13892-4 |
Methods of test for screed materials - Part 4: Determination of wear resistance-BCA |
|
DIN EN 13892-5 |
Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer |
|
DIN EN 13892-6 |
Methods of test for screed materials - Part 6: Determination of surface hardness |
|
DIN EN 13892-7 |
Methods of test for screed materials - Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings |
|
DIN EN 13892-8 |
Methods of test for screed materials - Part 8: Determination of bond strength |
|
DIN EN 13897 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness after stretching at low temperature |
|
DIN EN 13904 |
Low resistance shower outlets for sanitary tapware |
|
DIN EN 13905 |
Low resistance shower hoses for sanitary tapware |
|
DIN EN 13914-1 |
Design, preparation and application of external rendering and internal plastering - Part 1: External rendering |
|
DIN EN 13914-2 |
Design, preparation and application of external rendering and internal plastering - Part 2: Design considerations and essential principles for internal plastering |
|
DIN EN 13919 |
Natural stone test methods - Determination of resistance to ageing by SO2 action in the presence of humidity |
|
DIN EN 13924 |
Bitumen and bituminous binders - Specifications for hard paving grade bitumens |
|
DIN EN 13941 |
Design and installation of preinsulated bonded pipe systems for district heating |
|
DIN EN 13947 |
Thermal performance of curtain walling - Calculation of thermal transmittance |
|
DIN EN 13950 |
Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
|
DIN EN 13956 |
Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics (includes Corrigendum AC:2006) |
|
DIN EN 13963 |
Jointing materials for gypsum plasterboards - Definitions, requirements and test methods |
|
DIN EN 13964 |
Suspended ceilings - Requirements and test methods |
|
DIN EN 13964 |
Suspended ceilings - Requirements and test methods (includes Amendment A1:2006) |
|
DIN EN 13967 |
Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics (includes Amendment A1:2006) |
|
DIN EN 13969 |
Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics (includes Amendment A1:2006) |
|
DIN EN 13970 |
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics |
|
DIN EN 13970/A1 |
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics |
|
DIN EN 13977 |
Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
|
DIN EN 13984/A1 |
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics |
|
DIN EN 13986 |
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
|
DIN EN 14016-1 |
Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements |
|
DIN EN 14016-2 |
Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods |
|
DIN EN 14019 |
Curtain Walling - Impact resistance - Performance requirements |
|
DIN EN 14023 |
Bitumen and bituminous binders - Framework specification for polymer modified bitumens |
|
DIN EN 14024 |
Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment |
|
DIN EN 14037-1 |
Ceiling-mounted radiant panels supplied with water at a temperature below 120 °C - Part 1: Technical specifications and requirements |
|
DIN EN 14037-2 |
Ceiling-mounted radiant panels supplied with water at a temperature below 120 °C - Part 2: Test method for thermal output |
|
DIN EN 14063-1 |
Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation |
|
DIN EN 14066 |
Natural stone test methods - Determination of resistance to ageing by thermal shock |
|
DIN EN 14067-5 |
Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels |
|
DIN EN 14076 |
Timber stairs - Terminology; Trilingual version EN 14076:2004 |
|
DIN EN 14095 |
Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance and safety, testing |
|
DIN EN 14114 |
Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems |
|
DIN EN 14124 |
Inlet valves for flushing cisterns with internal overflow |
|
DIN EN 14134 |
Ventilation for buildings - Performance testing and installation checks of residential ventilation systems |
|
DIN EN 14146 |
Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency) |
|
DIN EN 14147 |
Natural stone test methods - Determination of resistance to ageing by salt mist |
|
DIN EN 14154-2 |
Water meters - Part 2: Installation and conditions of use |
|
DIN EN 14154-3 |
Water meters - Part 3: Test methods and equipment |
|
DIN EN 14157 |
Natural stone test methods - Determination of the abrasion resistance |
|
DIN EN 14158 |
Natural stone test methods - Determination of rupture energy |
|
DIN EN 14187-1 |
Cold applied sealants - Part 1: Test method for the determination of rate of cure |
|
DIN EN 14187-2 |
Cold applied sealants - Part 2: Test method for the determination of tack free time |
|
DIN EN 14187-3 |
Cold applied sealants - Part 3: Test method for the determination of self-levelling properties |
|
DIN EN 14187-4 |
Cold applied sealants - Part 4: Test methods for the determination of the change in mass and volume after immersion in test fuel |
|
DIN EN 14187-5 |
Cold applied joint sealants - Part 5: Test method for the determination of the resistance to hydrolysis |
|
DIN EN 14187-7 |
Cold applied joint sealants - Part 7: Test method for the determination of the resistance to flame |
|
DIN EN 14187-8 |
Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-radiation |
|
DIN EN 14187-9 |
Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants |
|
DIN EN 14188-1 |
Joint fillers and sealants - Part 1: Specifications for hot applied sealants |
|
DIN EN 14188-2 |
Joint fillers and sealants - Part 2: Specifications for cold applied sealants |
|
DIN EN 14188-3 |
Joint fillers and sealants - Part 3: Specifications for preformed joint seals |
|
DIN EN 14190 |
Gypsum plasterboard products from reprocessing - Definitions, requirements and test methods |
|
DIN EN 14195 |
Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods |
|
DIN EN 14196 |
Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers |
|
DIN EN 14201 |
Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing |
|
DIN EN 14202 |
Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods |
|
DIN EN 14203 |
Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods |
|
DIN EN 14205 |
Natural stone test methods - Determination of Knoop hardness |
|
DIN EN 14209 |
Preformed plasterboard cornices - Definitions, requirements and test methods |
|
DIN EN 14220 |
Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications |
|
DIN EN 14221 |
Timber and wood-based materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications |
|
DIN EN 14227-1 |
Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures |
|
DIN EN 14227-10 |
Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement |
|
DIN EN 14227-11 |
Hydraulically bound mixtures - Specifications - Part 11: Soil treated by lime |
|
DIN EN 14227-12 |
Hydraulically bound mixtures - Specifications - Part 12: Soil treated by slag |
|
DIN EN 14227-13 |
Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder |
|
DIN EN 14227-14 |
Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash |
|
DIN EN 14227-2 |
Hydraulically bound mixtures - Specifications - Part 2: Slag bound mixtures |
|
DIN EN 14227-3 |
Hydraulically bound mixtures - Specifications - Part 3: Fly ash-bound granular mixtures |
|
DIN EN 14227-4 |
Hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures |
|
DIN EN 14227-5 |
Hydraulically bound mixtures - Specifications - Part 5: Hydraulic road binder bound mixtures |
|
DIN EN 14231 |
Natural stone test methods - Determination of the slip resistance by means of the pendulum tester |
|
DIN EN 14239 |
Ventilation for buildings - Ductwork - Measurement of ductwork surface area |
|
DIN EN 1424 |
Road marking materials - Premix glass beads (includes Amendment A1:2003) |
|
DIN EN 14240 |
Ventilation for buildings - Chilled ceilings - Testing and rating |
|
DIN EN 14241-1 |
Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners |
|
DIN EN 14246 |
Gypsum elements for suspended ceilings - Definitions, requirements and test methods |
|
DIN EN 14250 |
Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
|
DIN EN 14251 |
Structural round timber - Test methods |
|
DIN EN 14260 |
Coal tar and pitch based binders and related products - Road tars - Characteristics and test methods |
|
DIN EN 14277 |
Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes |
|
DIN EN 1429 |
Bitumen and bituminous binders - Determination of residue on sieving of bitumen emulsions, and determination of storage stability by sieving |
|
DIN EN 14296 |
Sanitary appliances - Communal washing troughs |
|
DIN EN 14297 |
Chimneys - Freeze-thaw resistance test method for chimney products |
|
DIN EN 1430 |
Bitumen and bituminous binders - Determination of particle polarity of bitumen emulsions |
|
DIN EN 1431 |
Bitumen and bituminous binders - Determination of recovered binder and oil distillate from bitumen emulsions by distillation |
|
DIN EN 14316-1 |
Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
|
DIN EN 14316-2 |
Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products |
|
DIN EN 14317-1 |
Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
|
DIN EN 14317-2 |
Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products |
|
DIN EN 14336 |
Heating systems in buildings - Installation and commissioning of water based heating systems |
|
DIN EN 14337 |
Heating systems in buildings - Design and installation of direct electrical room heating systems |
|
DIN EN 14339 |
Underground fire hydrants |
|
DIN EN 14351-1 |
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics |
|
DIN EN 14358 |
Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample |
|
DIN EN 1436 |
Road marking materials - Road marking performances for road users (includes Amendment A1:2003) |
|
DIN EN 14366 |
Laboratory measurement of noise from waste water installations |
|
DIN EN 14367 |
Non controllable backflow preventer with different pressure zones - Family C, type A |
|
DIN EN 1437 |
Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading |
|
DIN EN 14374 |
Timber structures - Structural laminated veneer lumber - Requirements |
|
DIN EN 14389-2 |
Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustic characteristics |
|
DIN EN 14394 |
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
|
DIN EN 14409-1 |
Plastics piping systems for renovation of underground water supply networks - Part 1: General |
|
DIN EN 14409-3 |
Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes |
|
DIN EN 14411 |
Ceramic tiles - Definitions, classification, characteristics and marking |
|
DIN EN 14428 |
Shower enclosures - Functional requirements and test methods |
|
DIN EN 14428 Beiblatt 1 |
Shower enclosures - Functional requirements and test methods Supplement 1: Explanatory information relating to DIN EN 14428:2005-02 |
|
DIN EN 1443 |
Chimneys - General requirements |
|
DIN EN 14457 |
General requirements for components specifically designed for use in trenchless construction of drains and sewers |
|
DIN EN 14471 |
Chimneys - System chimneys with plastic flue liners - Requirements and test methods |
|
DIN EN 14496 |
Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods |
|
DIN EN 14501 |
Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification |
|
DIN EN 14503 |
Inland navigation vessels - Harbours for inland navigation |
|
DIN EN 14504 |
Inland navigation vessels - Floating landing stages - Requirements, tests |
|
DIN EN 14509 |
Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
|
DIN EN 1451-1 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the systems |
|
DIN EN 14511-1 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions |
|
DIN EN 14511-2 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions |
|
DIN EN 14511-3 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods |
|
DIN EN 14511-4 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Requirements |
|
DIN EN 14516 |
Baths for domestic purposes |
|
DIN EN 14518 |
Ventilation for buildings - Chilled beams - Testing and rating of passive chilled beams |
|
DIN EN 1452-1 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General |
|
DIN EN 1452-5 |
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system |
|
DIN EN 14527 |
Shower trays for domestic purposes |
|
DIN EN 14528 |
Bidets - Functional requirements and test methods |
|
DIN EN 1453-1 |
Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system; English version of DIN EN 1453-1 |
|
DIN EN 1455-1 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system |
|
DIN EN 14575 |
Geosynthetic barriers - Screening test method for determining the resistance to oxidation |
|
DIN EN 14579 |
Natural stone test methods - Determination of sound speed propagation |
|
DIN EN 14580 |
Natural stone test methods - Determination of static elastic modulus |
|
DIN EN 14581 |
Natural stone test methods - Determination of linear thermal expansion coefficient |
|
DIN EN 14608 |
Windows - Determination of the resistance to racking |
|
DIN EN 14609 |
Windows - Determination of the resistance to static torsion |
|
DIN EN 14617-1 |
Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption |
|
DIN EN 14617-10 |
Agglomerated stone - Test methods - Part 10: Determination of chemical resistance |
|
DIN EN 14617-11 |
Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient |
|
DIN EN 14617-12 |
Agglomerated stone - Test methods - Part 12: Determination of dimensional stability |
|
DIN EN 14617-13 |
Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity |
|
DIN EN 14617-15 |
Agglomerated stone - Test methods - Part 15: Determination of compressive strength |
|
DIN EN 14617-16 |
Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles |
|
DIN EN 14617-2 |
Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending) |
|
DIN EN 14617-4 |
Agglomerated stone - Test methods - Part 4: Determination of the abrasion resistance |
|
DIN EN 14617-5 |
Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance |
|
DIN EN 14617-6 |
Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance |
|
DIN EN 14617-9 |
Agglomerated stone - Test methods - Part 9: Determination of impact resistance |
|
DIN EN 14618 |
Agglomerated stone - Terminology and classification |
|
DIN EN 1462 |
Brackets for eaves gutters - Requirements and testing |
|
DIN EN 14622 |
Devices to prevent pollution by backflow of potable water - Air gap with circular overflow (restricted) - Family A, type F |
|
DIN EN 14623 |
Devices to prevent pollution by backflow of potable water - Air gaps with minimum circular overflow (verified by test or measurement) - Family A, type G |
|
DIN EN 1463-2 |
Road marking materials - Retroreflecting road studs - Part 2: Road test performance specifications; English version of DIN EN 1463-2 |
|
DIN EN 14647 |
Calcium aluminate cement - Composition, specifications and conformity criteria |
|
DIN EN 14653-1 |
Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications |
|
DIN EN 14653-2 |
Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test |
|
DIN EN 14654-1 |
Management and control of cleaning operations in drains and sewers - Part 1: Sewer cleaning |
|
DIN EN 1467 |
Natural stone - Rough blocks - Requirements |
|
DIN EN 1468 |
Natural stone - Rough slabs - Requirements |
|
DIN EN 1469 |
Natural stone products - Slabs for cladding - Requirements |
|
DIN EN 14706 |
Thermal insulation products for building equipment and industrial installations - Determination of maximum service temperature |
|
DIN EN 14707 |
Thermal insulation products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation |
|
DIN EN 14716 |
Stretched ceilings - Requirements and tests methods |
|
DIN EN 14730-1 |
Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
|
DIN EN 14730-2 |
Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds |
|
DIN EN 14733 |
Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control |
|
DIN EN 14758-1 |
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system |
|
DIN EN 14769 |
Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) |
|
DIN EN 14770 |
Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR) |
|
DIN EN 14771 |
Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR) |
|
DIN EN 14782 |
Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
|
DIN EN 14783 |
Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements |
|
DIN EN 14801 |
Conditions for pressure classification of products for water and wastewater pipelines |
|
DIN EN 14811 |
Railway applications - Track - Special purpose rail - Grooved and associated construction |
|
DIN EN 14812 |
Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing |
|
DIN EN 14830 |
Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance |
|
DIN EN 14840 |
Joint fillers and sealants - Test methods for preformed joint seals |
|
DIN EN 1487 |
Building valves - Hydraulic safety groups - Tests and requirements; English version of DIN EN 1487 |
|
DIN EN 1488 |
Building valves - Expansion groups - Tests and requirements; English version of DIN EN 1488 |
|
DIN EN 1489 |
Building valves - Pressure safety valves - Tests and requirements; English version of DIN EN 1489 |
|
DIN EN 14895 |
Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders |
|
DIN EN 14896 |
Bitumen and bituminous binders - Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders - Rotating spindle viscometer method |
|
DIN EN 14897 |
Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing |
|
DIN EN 14898 |
Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing |
|
DIN EN 1490 |
Building valves - Combined temperature and pressure relief valves - Tests and requirements; English version of DIN EN 1490 |
|
DIN EN 14908-1 |
Open Data Communication in Building Automation, Controls and Building Management - Building Network Protocol - Part 1: Protocol Stack; English version EN 14908-1:2005 |
|
DIN EN 14908-2 |
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication; English version EN 14908-2:2005 |
|
DIN EN 14908-3 |
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification; English version EN 14908-3:2006 |
|
DIN EN 14908-4 |
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication; English version EN 14908-4:2006 |
|
DIN EN 14908-5 |
(DRAFT) Open Data Communication in Building Automation, Controls and Building Management Implementation Guideline - Control Network Protocol - Part 5: Implementation Guideline; English version prEN 14908-5:2006 |
|
DIN EN 14909 |
Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics |
|
DIN EN 1491 |
Building valves - Expansions valves - Tests and requirements; English version of DIN EN 1491 |
|
DIN EN 14963 |
Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
|
DIN EN 14964 |
Rigid underlays for discontinuous roofing - Definitions and characteristics |
|
DIN EN 14967 |
Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics |
|
DIN EN 14969 |
Railway applications - Track - Qualification system for railway track work contractors |
|
DIN EN 14975 |
Loft ladders - Requirements, marking and testing |