|
DIN EN 846-7 |
Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections); English version of DIN EN 846-7 |
|
DIN EN 846-8 |
Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers |
|
DIN EN 846-9 |
Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels; English version of DIN EN 846-9 |
|
DIN EN 932-1 |
Tests for general properties of aggregates - Part 1: Methods for sampling |
|
DIN EN 932-2 |
Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples |
|
DIN EN 932-6 |
Test for general properties of aggregates - Part 6: Definitions of repeatability and reproducibility |
|
DIN EN 947 |
Hinged or pivoted doors - Determination of the resistance to vertical load |
|
DIN EN 948 |
Hinged or pivoted doors - Determination of the resistance to static torsion |
|
DIN EN 949 |
Windows and curtain walling, doors, blinds and shutters - Determination of the resistance to soft and heavy body impact for doors |
|
DIN EN 950 |
Door leaves - Determination of the resistance to hard body impact |
|
DIN EN 951 |
Door leaves - Method for measurement of height, width, thickness and squareness |
|
DIN EN 952 |
Door leaves - General and local flatness - Measurement method |
|
DIN EN 996 |
Piling equipment - Safety requirements |
|
DIN EN 997 |
WC pans and WC suites with integral trap |
|
DIN EN 998-1 |
Specification for mortar for masonry - Part 1: Rendering and plastering mortar |
|
DIN EN 998-2 |
Specification for mortar for masonry - Part 2: Masonry mortar |
|
DIN EN ISO 10052 |
Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2004) |
|
DIN EN ISO 10211-1 |
Thermal bridges in building construction - Heat flows and surface temperatures - General calculation methods (ISO 10211-1:1995) |
|
DIN EN ISO 10211-2 |
Thermal bridges in building construction - Calculation of heat flows and surface temperatures - Part 2: Linear thermal bridges (ISO 10211-2:2001); English version of DIN EN ISO 10211-2 |
|
DIN EN ISO 10318 |
Geosynthetics - Terms and definitions (ISO 10318:2005); Trilingual version EN ISO 10318:2006 |
|
DIN EN ISO 10426-1 |
(DRAFT) Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2005); English version EN ISO 10426-1:2006 |
|
DIN EN ISO 10426-1 |
Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2000) |
|
DIN EN ISO 10426-1 |
Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2005); English version EN ISO 10426-1:2006 |
|
DIN EN ISO 10426-2 |
Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements (ISO 10426-2:2003 + Amd. 1:2005); English version EN ISO 10426-2:2003 + A1:2005 |
|
DIN EN ISO 10426-3 |
Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations (ISO 10426-3:2003); English version EN ISO 10426-3:2004 |
|
DIN EN ISO 10426-4 |
Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure (ISO 10426-4:2004); English version EN ISO 10426-4:2004 |
|
DIN EN ISO 10426-5 |
Petroleum and natural gas industries - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure (ISO 10426-5:2004); English version EN ISO 10426-5:2005 |
|
DIN EN ISO 10426-6 |
(DRAFT) Petroleum and natural gas industries - Cements and materials for well cementing - Part 6: Methods for determining the static gel strength of cement formulations (ISO/DIS 10426-6:2006); English version prEN ISO 10426-6:2006 |
|
DIN EN ISO 10456 |
Building materials and products - Procedures for determining declared and design thermal values (ISO 10456:1999); English version of DIN EN ISO 10456 |
|
DIN EN ISO 10545-1 |
Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 510545-1:1995) |
|
DIN EN ISO 10545-10 |
Ceramic tiles - Part 10: Determination of moisture expansion (ISO 10545-10:1995) |
|
DIN EN ISO 10545-11 |
Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles (ISO 10545-11:1994) |
|
DIN EN ISO 10545-12 |
Ceramic tiles - Part 12: Determination of frost resistance (ISO 10545-12:1995), including Technical Corrigendum 1:1997) |
|
DIN EN ISO 10545-13 |
Ceramic tiles - Part 13: Determination of chemical resistance (ISO 10545-13:1995) |
|
DIN EN ISO 10545-14 |
Ceramic tiles - Part 14: Determination of resistance to stains (ISO 10545-14:1995, including Technical Corrigendum 1:1997) |
|
DIN EN ISO 10545-15 |
Ceramic tiles - Part 15: Determination of lead and cadmium given off by glazed tiles (ISO 10545-15:1995) |
|
DIN EN ISO 10545-16 |
Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-16:1999); English version of DIN EN ISO 10545-16 |
|
DIN EN ISO 10545-2 |
Ceramic tiles - Part 2: Determination of dimensions and surface quality (ISO 10545-2:1995, including Technical Corrigendum 1:1997) |
|
DIN EN ISO 10545-3 |
Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:1995, including Technical Corrigendum 1:1997) |
|
DIN EN ISO 10545-4 |
Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:1995) |
|
DIN EN ISO 10545-5 |
Ceramic tiles - Part 5: Determination of impact resistance by measurement of coefficient of restitution (ISO 10545-5:1996, including Technical Corrigendum 1:1996) |
|
DIN EN ISO 10545-6 |
Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:1995) |
|
DIN EN ISO 10545-7 |
Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles (ISO 10545-7:1996) |
|
DIN EN ISO 10545-8 |
Ceramic tiles - Part 8: Determination of linear thermal expansion (ISO 10545-8:1994) |
|
DIN EN ISO 10545-9 |
Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9:1994) |
|
DIN EN ISO 10563 |
Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005) |
|
DIN EN ISO 10590 |
Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005) |
|
DIN EN ISO 10591 |
Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005) |
|
DIN EN ISO 10848-1 |
Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2006) |
|
DIN EN ISO 10848-2 |
Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 2: Application to light elements when the junction has a small influence (ISO 10848-2:2006) |
|
DIN EN ISO 10848-3 |
Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 3: Application to light elements when the junction has a substantial influence (ISO 10848-3:2006) |
|
DIN EN ISO 11431 |
Building construction - Jointing products - Determination of adhesion/cohesion properties of saelants after exposure to heat, water and artificial light through glass (ISO 11431:2002) |
|
DIN EN ISO 11432 |
Building construction - Sealants - Determination of resistance to compression (ISO 11432:2005) |
|
DIN EN ISO 11600 |
Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002) |
|
DIN EN ISO 11691 |
Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) |
|
DIN EN ISO 1182 |
Reaction to fire tests for building products - Non-combustibility tests (ISO 1182:2002) |
|
DIN EN ISO 11925-2 |
Reaction to fire tests for building products - Part 2: Ignitability when subjected to direct impingement of flame (ISO 11925-2:2002) |
|
DIN EN ISO 12241 |
Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:1998); German version EN ISO 12241:1998 |
|
DIN EN ISO 12567-2 |
Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows (ISO 12567-2:2005) |
|
DIN EN ISO 12569 |
Thermal performance of buildings - Determination of air change in buildings - Tracer gas dilution method (ISO 12569:2000); English version of DIN EN ISO 12569 |
|
DIN EN ISO 12570 |
Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000); English version of DIN EN ISO 12570 |
|
DIN EN ISO 12571 |
Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2000); English version of DIN EN ISO 12571 |
|
DIN EN ISO 12572 |
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001); English version of DIN EN ISO 12572 |
|
DIN EN ISO 12944-3 |
Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:1998) |
|
DIN EN ISO 12944-5 |
Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:1998) |
|
DIN EN ISO 12944-6 |
Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:1998) |
|
DIN EN ISO 12944-8 |
Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:1998) |
|
DIN EN ISO 13370 |
Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:1998) |
|
DIN EN ISO 13428 |
Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage (ISO 13428:2005) |
|
DIN EN ISO 13473-1 |
Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth (ISO 13473-1:1997) |
|
DIN EN ISO 13786 |
Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:1999) |
|
DIN EN ISO 13787 |
Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003) |
|
DIN EN ISO 13788 |
Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2001); English version of DIN EN ISO 13788:2001 |
|
DIN EN ISO 13789 |
Thermal performance of buildings - Transmission heat loss coefficient - Calculation method (ISO 13789:1999) |
|
DIN EN ISO 13791 |
Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2004) |
|
DIN EN ISO 13792 |
Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified method (ISO 13792:2005) |
|
DIN EN ISO 13793 |
Thermal performance of buildings - Thermal design of foundations to avoid frost heave (ISO 13793:2001); English version of DIN EN ISO 13793 |
|
DIN EN ISO 140-11 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors (ISO 140-11:2005) |
|
DIN EN ISO 140-14 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 14: Guidelines for special situations in the field (ISO 140-14:2004) |
|
DIN EN ISO 140-18 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 18: Laboratory measurement of sound generated by rainfall on building elements (ISO 140-18:2006) |
|
DIN EN ISO 140-4 |
Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms (ISO 140-4:1998) |
|
DIN EN ISO 140-5 |
Measurement of sound insulation in buildings and of building elements - Part 5: Field measurements of airborne sound insulation of facade elements and facades (ISO 140-5:1998) |
|
DIN EN ISO 140-6 |
Measurement of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors (ISO 140-6:1998) |
|
DIN EN ISO 140-8 |
Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a standard floor (ISO 140-8:1997) |
|
DIN EN ISO 14683 |
Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 4683:1999) |
|
DIN EN ISO 15148 |
Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion (ISO 15148:2002) |
|
DIN EN ISO 15186-1 |
Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements (ISO 15186-1:2000) |
|
DIN EN ISO 15874-1 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2003) |
|
DIN EN ISO 15874-2 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2003) |
|
DIN EN ISO 15874-3 |
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2003) |
|
DIN EN ISO 15875-1 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003) |
|
DIN EN ISO 15875-2 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003) |
|
DIN EN ISO 15875-3 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003) |
|
DIN EN ISO 15875-5 |
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003) |
|
DIN EN ISO 15876-1 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General (ISO 15876-1:2003) |
|
DIN EN ISO 15876-2 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes (ISO 15876-2:2003) |
|
DIN EN ISO 15876-3 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings (ISO 15876-3:2003) |
|
DIN EN ISO 15876-5 |
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003) |
|
DIN EN ISO 15877-1 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2003) |
|
DIN EN ISO 15877-2 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2003) |
|
DIN EN ISO 15877-3 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2003) |
|
DIN EN ISO 15877-5 |
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2003) |
|
DIN EN ISO 15927-1 |
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly and annual means of single meteorological elements (ISO 15927-1:2003) |
|
DIN EN ISO 15927-4 |
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling (ISO 15927-4:2005) |
|
DIN EN ISO 15927-5 |
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating (ISO 15927-5:2004) |
|
DIN EN ISO 16032 |
Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004) |
|
DIN EN ISO 1716 |
Reaction to fire tests for building products - Determination of the heat of combustion (ISO 1716:2002) |
|
DIN EN ISO 18233 |
Acoustics - Application of new measurement methods in building and room acoustics (ISO 18233:2006) |
|
DIN EN ISO 19432 |
Building construction machinery and equipment - Portable, hand-held internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006) |
|
DIN EN ISO 19901-2 |
Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria (ISO 19901-2:2004); English version EN ISO 19901-2:2004 |
|
DIN EN ISO 3382 |
Measurement of the reverberation time of rooms with reference to other acoustical parameters (ISO 3382 : 1997); English version of DIN EN ISO 3382 |
|
DIN EN ISO 3822-1 |
Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999) |
|
DIN EN ISO 3822-2 |
Laboratory tests on noise emission from appliances and equipment used in water supply installations - Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995) |
|
DIN EN ISO 3822-3 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1997); German version EN ISO 3822-3:1997 |
|
DIN EN ISO 3822-4 |
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances (ISO 3822-4:1997); German version EN ISO 3822-4:1997 |
|
DIN EN ISO 5135 |
Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997) |
|
DIN EN ISO 5210 |
Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991) |
|
DIN EN ISO 6946 |
Building components and building elements - Thermal resistance and thermal transmittance - Calculation method (ISO 6946:1996 + Amd 1:2003) (includes Amendment A1:2003) |
|
DIN EN ISO 717-2 |
Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:1996 + AM1:2006) |
|
DIN EN ISO 7345 |
Thermal insulation - Physical quantities and definitions (ISO 7345:1987) |
|
DIN EN ISO 7389 |
Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002) |
|
DIN EN ISO 7390 |
Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2002) |
|
DIN EN ISO 8339 |
Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005) |
|
DIN EN ISO 8340 |
Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005) |
|
DIN EN ISO 8990 |
Thermal insulation - Determination of steady-state thermal transmission properties using the calibrated and guarded hot boxes (ISO 8990:1994) |
|
DIN EN ISO 9047 |
Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001) |
|
DIN EN ISO 9229 |
(DRAFT) Thermal insulation - Definitions of terms (ISO/DIS 9229:1997); Trilingual version prEN ISO 9229:1997 |
|
DIN EN ISO 9251 |
Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary (ISO 9251:1987) |
|
DIN EN ISO 9288 |
Thermal insulation - Heat transfer by radiation: Physical quantities and definitions (ISO 9288:1989) |
|
DIN EN ISO 9346 |
Thermal insulation - Mass transfer: Physical quantities and definitions (ISO 9346:1987) |
|
DIN IEC 62056-46/A1 |
(DRAFT) Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol (IEC 13/1313/CD:2004), text in English |
|
DIN IEC 62056-53 |
(DRAFT) Electricity metering - Data exchange for meter reading, tariff and load control - Part 53: COSEM application layer (IEC 13/1311/CD:2004), text in English |
|
DIN IEC 62056-61 |
(DRAFT) Electricity metering - Data exchange for meter reading, tariff and load control - Part 61: Object identification system (OBIS) (IEC 13/1322/CD:2004), text in English |
|
DIN IEC 62056-62 |
(DRAFT) Electricity metering - Data exchange for meter reading, tariff and load control - Part 62: Interface classes (IEC 13/1324/CD:2004), text in English |
|
DIN ISO 13472-1 |
Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method (ISO 13472-1:2002) |
|
DIN ISO 13473-2 |
Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis (ISO 13473-2:2002) |
|
DIN ISO 13473-3 |
Characterization of pavement texture by use of surface profiles - Part 3: Specifications and classification of profilometers (ISO 13473-3:2002) |
|
DIN ISO 7465 |
Passenger lifts and service lifts - Guide rails for lift cars and counterweights - T-type (ISO 7465:2001) |
|
DIN-Fachbericht 115 |
Implementation guide for functional standards prepared by CEN/TC 234 |
|
DIN-Fachbericht CEN/TR 81-10 |
Safety rules for the contruction and installation of lifts - Basics - Part 10: System of the EN 81 series of standards; German and english version CEN/TR 81-10:2004 |