|
DIN CWA 14247 |
Water treatment membranes - Influence of materials on water intended for human consumption - Test method; English version CWA 14247:2001 |
|
DIN EN 1005-2 |
Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
|
DIN EN 1021-2 |
Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent |
|
DIN EN 1028-1 |
Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification; General and safety requirements |
|
DIN EN 1028-2 |
Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements |
|
DIN EN 1037 |
Safety of machinery - Prevention of unexpected start-up |
|
DIN EN 1047-1 |
Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets and diskette inserts |
|
DIN EN 1047-2 |
Secure storage units - Classification and methods of tests for resistance to fire - Part 2: Data rooms and data containes; English version of DIN EN 1047-2 |
|
DIN EN 1073-1 |
Protective clothing against radioactive contamination - Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactive contamination |
|
DIN EN 1073-2 |
Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
|
DIN EN 1076 |
Pumped sorbent tubes for the determination of gases and vapours at the workplace - Requirements and test methods (includes Corrigendum AC:1997) |
|
DIN EN 1077 |
Helmets for alpine skiers |
|
DIN EN 1078 |
Helmets for pedal cyclists and for users of skateboards and roller skates |
|
DIN EN 1080 |
Impact protection helmets for young children |
|
DIN EN 1082-1 |
Gloves and arm guards protecting against cuts and stabs by hand knives - Part 1: Chain mail gloves and arm guards |
|
DIN EN 1082-2 |
Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail; English version of DIN EN 1082-2 |
|
DIN EN 1082-3 |
Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials; English version DIN EN 1082-3 |
|
DIN EN 1085 |
Wastewater treatment - Vocabulary; Trilingual version EN 1085:2007 |
|
DIN EN 1089-2 |
Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 2: Precautionary labels |
|
DIN EN 1093-1 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods |
|
DIN EN 1093-11 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index; English version of DIN EN 1093-11 |
|
DIN EN 1093-3 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
|
DIN EN 1093-4 |
Evaluation of airborne hazardous substances emitted from machinery - Determination of capture efficiency of an exhaust system by the tracer method |
|
DIN EN 1093-6 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet |
|
DIN EN 1093-7 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet |
|
DIN EN 1093-8 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter - Test bench method |
|
DIN EN 1093-9 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter - Room method |
|
DIN EN 1095 |
Deck safety harness and safety line for use on recreational craft - Safety requirements and test methods |
|
DIN EN 1101 |
Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the ignitability of vertically oriented specimens (small flame) |
|
DIN EN 1102 |
Burning behaviour of curtains and drapes - Detailed method of determining the flame spread of vertically oriented specimens |
|
DIN EN 1103 |
Textiles - Fabrics for apparel - Detailed procedure to determine the burning behaviour |
|
DIN EN 1127-1 |
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
|
DIN EN 1127-2 |
Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
|
DIN EN 1143-1 |
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms |
|
DIN EN 1143-2 |
Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems |
|
DIN EN 1146 |
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking |
|
DIN EN 1147 |
Portable ladders for fire service use; English version of DIN EN 1147 |
|
DIN EN 1149-1 |
Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity |
|
DIN EN 1149-2 |
Electrostatic properties of protective clothing - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) |
|
DIN EN 1149-3 |
Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay |
|
DIN EN 1150 |
Protective clothing - Visibility clothing for non-professional use - Test methods and requirements |
|
DIN EN 12021 |
Respiratory protective devices - Compressed air for breathing apparatus |
|
DIN EN 12065 |
Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires |
|
DIN EN 12083 |
Respiratory protective devices - Filters with breathing hoses (non-mask mounted) - Particle filters, gas filters and combined filters - Requirements, testing, marking |
|
DIN EN 12094-1 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices |
|
DIN EN 12094-10 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches |
|
DIN EN 12094-12 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices |
|
DIN EN 12094-16 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 16: Requirements and test methods for odorizing devices for CO2 low pressure systems |
|
DIN EN 12094-2 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices |
|
DIN EN 12094-3 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices |
|
DIN EN 12094-4 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators |
|
DIN EN 12094-5 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
|
DIN EN 12094-6 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices |
|
DIN EN 12094-8 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
|
DIN EN 12094-9 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors |
|
DIN EN 12096 |
Mechanical vibration - Declaration and verification of vibration emission values |
|
DIN EN 12101-2 |
Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators |
|
DIN EN 12101-6 |
Smoke and heat control systems - Part 6: Specification for pressure differential systems, Kits |
|
DIN EN 12176 |
Characterization of sludge - Determination of pH-value |
|
DIN EN 12198-1 |
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles; English version of DIN EN 12198-1 |
|
DIN EN 12198-2 |
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure |
|
DIN EN 12198-3 |
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening |
|
DIN EN 12255-1 |
Wastewater treatment plants - Part 1: General construction principles; English version of DIN EN 12255-1 |
|
DIN EN 12255-10 |
Wastewater treatment plants - Part 10: Safety principles; English version of DIN EN 12255-10 |
|
DIN EN 12255-11 |
Wastewater treatment plants - Part 11: General data required; English version of DIN EN 12255-11 |
|
DIN EN 12255-12 |
Wastewater treatment plants - Part 12: Control and automation |
|
DIN EN 12255-13 |
Wastewater treatment plants - Part 13: Chemical treatment; Treatment of wastewater by precipitation/flocculation |
|
DIN EN 12255-14 |
Wastewater treatment plants - Part 14: Disinfection |
|
DIN EN 12255-15 |
Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants |
|
DIN EN 12255-16 |
Wastewater treatment plants - Part 16: Physical (mechanical) filtration |
|
DIN EN 12255-3 |
Wastewater treatment plants - Part 3: Preliminary treatment (includes corrigendum AC:2000); English version of DIN EN 12255-3:2000 + AC:2000 |
|
DIN EN 12255-4 |
Wastewater treatment plants - Part 4: Primary settlement; English version of DIN EN 12255-4 |
|
DIN EN 12255-5 |
Wastewater treatment plants - Part 5: Lagooning processes |
|
DIN EN 12255-6 |
Wastewater treatment plants - Part 6: Activated sludge process; English version of DIN EN 12255-6 |
|
DIN EN 12255-7 |
Wastewater treatment plants - Part 7: Biological fixed-film reactors; English version of DIN EN 12255-7 |
|
DIN EN 12255-8 |
Wastewater treatment plants - Part 8: Sludge treatment and storage; English version of DIN EN 12255-8 |
|
DIN EN 12255-9 |
Wastewater treatment plants - Part 9: Odour control and ventilation; English version of DIN EN 12255-9 |
|
DIN EN 12258-3 |
Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap; Trilingual version EN 12258-3:2003 |
|
DIN EN 12258-4 |
Aluminium and aluminium alloys - Terms and definitions - Part 4: Residues of the aluminium industry; Trilingual version EN 12258-4:2004 |
|
DIN EN 12260 |
Water quality - Determination of nitrogen - Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides |
|
DIN EN 12285-1 |
Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
|
DIN EN 12285-2 |
Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
|
DIN EN 1231 |
Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods; German version EN 1231:1996 |
|
DIN EN 1232 |
Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods |
|
DIN EN 1233 |
Determination of chromium content of water by atomic absorption spectrometry |
|
DIN EN 12338 |
Water quality - Determination of mercury - Enrichment methods by amalgamation |
|
DIN EN 12341 |
Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods |
|
DIN EN 12416-1 |
Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components; English version of DIN EN 12416-1 |
|
DIN EN 12416-2 |
Fixed firefighting systems - Powder systems - Part 2: Design, construction and maintenance; English version of DIN EN 12416-2 |
|
DIN EN 12457-1 |
Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solids ratio of 2 l/kg for materials with high solids content and with particle size below 4 mm (with or without size reduction) |
|
DIN EN 12457-2 |
Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 2: One-stage batch test at a liquid to solids ratio of 10 l/kg for materials with a particle size below 4 mm (with or without size reduction) |
|
DIN EN 12457-3 |
Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 3: Two-stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solids content and with a particle size below 4 mm (with or without size reduction) |
|
DIN EN 12457-4 |
Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One-stage batch test at a liquid to solids ratio of 10 l/kg for materials with particle size below 10 mm (with or without size reduction) |
|
DIN EN 12461 |
Biotechnology - Large-scale process and production - Guidance for the handling, inactivating and testing of waste |
|
DIN EN 12477 |
Protective gloves for welders |
|
DIN EN 12492 |
Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods (includes Amendment A1:2002) |
|
DIN EN 12506 |
Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, CI-, Co, Cr, Cr(VI), Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn |
|
DIN EN 12561-1 |
Railway applications - Tank wagons - Part: 1: Marking of tank wagons for the carriage of dangerous goods |
|
DIN EN 12561-2 |
Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
|
DIN EN 12561-3 |
Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
|
DIN EN 12561-4 |
Railway applications - Tank wagons - Part 4: Top devices for top emptying and filling of liquid products |
|
DIN EN 12561-5 |
Railway applications - Tank wagons - Part 5: Top devices for bottom emptying and top filling of liquid products |
|
DIN EN 12561-6 |
Railway applications - Tank wagons - Part 6: Manholes |
|
DIN EN 12566-3 |
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
|
DIN EN 12613 |
Plastics warning devices with visual characteristics for underground cables and pipelines; English version of DIN EN 12613 |
|
DIN EN 12619 |
Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method |
|
DIN EN 1263-1 |
Safety nets - Part 1: Safety requirements, test methods |
|
DIN EN 1263-2 |
Safety nets - Part 2: Safety requirements for the positioning limits |
|
DIN EN 12673 |
Water quality - Gas chromatographic determination of some selected chlorophenols in water |
|
DIN EN 12729 |
Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone, family B, type A |
|
DIN EN 12740 |
Biotechnology - Laboratories for research, development and analysis - Guidance for handling, inactivating and testing of waste |
|
DIN EN 12753 |
Termical cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
|
DIN EN 12786 |
Safety of machinery - Guidance for the drafting of the vibration clauses of safety standards |
|
DIN EN 12816 |
Transportable refillable steel and aluminium LPG cylinders - Disposal; English version of DIN EN 12816 |
|
DIN EN 12832 |
Characterisation of sludges - Utilisation and disposal of sludges - Vocabulary; Trilingual version EN 12832:1999 |
|
DIN EN 12841 |
Personal fall protection equipment - Rope access systems - Rope adjustment devices |
|
DIN EN 12873-1 |
Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products |
|
DIN EN 12873-2 |
Influence of materials on water intended for human consumption - Influence due to migration - Part 2: Test method for non-metallic and non-cementitious site-applied materials |
|
DIN EN 12873-3 |
Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins |
|
DIN EN 12873-4 |
Influence of materials on water intended for human consumption - Influence due to migration - Part 4: Test method for water treatment membranes |
|
DIN EN 12879 |
Characterization of sludges - Determination of the loss on ignition of dry mass; English version of DIN EN 12879 |
|
DIN EN 12880 |
Characterization of sludges - Determination of dry residue and water content; English version of DIN EN 12880 |
|
DIN EN 12881-1 |
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
|
DIN EN 12881-2 |
Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test |
|
DIN EN 12882 |
Conveyor belts for general purpose use - Electrical and flammability safety requirements; English version of DIN EN 12882 |
|
DIN EN 12918 |
Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analyses |
|
DIN EN 12919 |
Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods |
|
DIN EN 12920 |
Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions |
|
DIN EN 12940 |
Footwear manufacturing wastes - Waste classification and management |
|
DIN EN 12953-10 |
Shell boilers - Part 10: Requirements for boiler feedwater and boiler water quality |
|
DIN EN 12972 |
Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks |
|
DIN EN 1300 |
Secure storage units - Classification for high security locks according to their resistance to unauthorized opening |
|
DIN EN 13034 |
Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB[6] equipment) |
|
DIN EN 13052-1 |
Influence of organic materials on water intended for human consumption - Organic materials; Determination of colour and turbidity of water in piping systems - Part 1: Test method; English version of DIN EN 13052-1 |
|
DIN EN 13059 |
Safety of industrial trucks - Test methods for measuring vibration |
|
DIN EN 13061 |
Protective clothing - Shin guards for association football players - Requirements and test methods; English version of DIN EN 13061 |
|
DIN EN 13076 |
Devices to prevent pollution by backflow of potable water - Unrestricted air gap - Family A - Type A |
|
DIN EN 13077 |
Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A, type B |
|
DIN EN 13078 |
Devices to prevent pollution by backflow of potable water - Air gap with submerged feed incorporating air inlet plus overflow - Family A, type C |
|
DIN EN 13079 |
Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A; Type D |
|
DIN EN 13081 |
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor coupler; English version of DIN EN 13081 |
|
DIN EN 13082 |
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve; English version of DIN EN 13082 |
|
DIN EN 13083 |
Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading; English version of DIN EN 13083 |
|
DIN EN 13087-1 |
Protective helmets - Test methods - Part 1: Conditions and conditioning; English version of DIN EN 13087-1 |
|
DIN EN 13087-10 |
Protective helmets - Test methods - Part 10: Resistance to radiant heat; English version of DIN EN 13087-10 |
|
DIN EN 13087-2 |
Protective helmets - Test methods - Part 2: Shock absorption; English version of DIN EN 13087-2 |
|
DIN EN 13087-3 |
Protective helmets - Test methods - Part 3: Resistance to penetration; English version of DIN EN 13087-3 |
|
DIN EN 13087-4 |
Protective helmets - Test methods - Part 4: Retention system effectiveness; English version of DIN EN 13087-4 |
|
DIN EN 13087-5 |
Protective helmets - Test methods - Part 5: Retention system strength; English version of DIN EN 13087-5 |
|
DIN EN 13087-6 |
Protective helmets - Test methods - Part 6: Field of vision; English version of DIN EN 13087-6 |
|
DIN EN 13087-7 |
Protective helmets - Test methods - Part 7: Flame resistance; English version of DIN EN 13087-7 |
|
DIN EN 13087-8 |
Protective helmets - Test methods - Part 8: Electrical properties |
|
DIN EN 13094 |
Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
|
DIN EN 13098 |
Workplace atmospheres - Guidelines for measurement of airborne micro-organisms and endotoxin; English version of DIN EN 13098 |
|
DIN EN 13123-1 |
Windows, doors and shutters - Explosion resistance; Requirements and classification - Part 1: Shock tube; English version of DIN EN 13123-1 |
|
DIN EN 13123-2 |
Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test |
|
DIN EN 13124-1 |
Windows, doors and shutters - Explosion resistance; Test method - Part 1: Shock tube; English version of DIN EN 13124-1 |
|
DIN EN 13124-2 |
Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test |
|
DIN EN 13137 |
Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments; English version of DIN EN 13137 |
|
DIN EN 13138-1 |
Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn |
|
DIN EN 13138-2 |
Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held |
|
DIN EN 13138-3 |
Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn |
|
DIN EN 13158 |
Protective jackets, body and shoulder protectors for horse riders - Requirements and test methods; English version of DIN EN 13158 |
|
DIN EN 1317-2 |
Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers |
|
DIN EN 1317-3 |
Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions; English version of DIN EN 1317-3 |
|
DIN EN 13178 |
Personal eye protection - Eye protectors for snowmobile users; English version of DIN EN 13178 |
|
DIN EN 13193 |
Packaging and the environment - Terminology; English version of DIN EN 13193 |
|
DIN EN 13204 |
Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
|
DIN EN 13205 |
Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations |
|
DIN EN 13211 |
Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; English version of DIN EN 13211 |
|
DIN EN 13211 Berichtigung 1 |
Air quality - Stationary source emissions - Manual methode of determination of the concentration of total mercury; Corrigenda to DIN EN 13211:2001-06 |
|
DIN EN 13237 |
Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
|
DIN EN 13238 |
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates; English version of DIN EN 13238 |
|
DIN EN 13274-1 |
Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage; English version of DIN EN 13274-1 |
|
DIN EN 13274-2 |
Respiratory protective devices - Methods of test - Part 2: Practical performance tests; English version of DIN EN 13274-2 |
|
DIN EN 13274-3 |
Respiratory protective devices - Methods of test - Part 3: Determination of breathing resistance; English version of DIN EN 13274-3 |
|
DIN EN 13274-4 |
Respiratory protective devices - Methods of test - Part 4: Flame test; English version of DIN EN 13274-4 |
|
DIN EN 13274-5 |
Respiratory protective devices - Methods of test - Part 5: Climatic conditions; English version of DIN EN 13274-5 |
|
DIN EN 13274-6 |
Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air; English version of DIN EN 13274-6 |
|
DIN EN 13274-7 |
Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration |
|
DIN EN 13274-8 |
Respiratory protective devices - Methods of test - Part 8: Determination of dolomite dust clogging |
|
DIN EN 13277-1 |
Protective equipment for martial arts - Part 1: General requirements and test methods; English version of DIN EN 13277-1 |
|
DIN EN 13277-2 |
Protective equipment for martial arts - Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors; English version of DIN EN 13277-2 |
|
DIN EN 13277-3 |
Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors; English version of DIN EN 13277-3 |
|
DIN EN 13277-4 |
Protective equipment for martial arts - Part 4: Additional requirements and test methods for head protectors; English version of DIN EN 13277-4 |
|
DIN EN 13277-5 |
Protective equipment for martial arts - Part 5: Additional requirements and test methods for genital protectors and abdominal protectors; English version of DIN EN 13277-5 |
|
DIN EN 13277-6 |
Protective equipment for martial arts - Part 6: Additional requirements and test methods for breast protectors for females |
|
DIN EN 13284-1 |
Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
|
DIN EN 13287 |
Personal protective equipment - Footwear - Test method for slip resistance |
|
DIN EN 133 |
Respiratory protective devices - Classification; English version of DIN EN 133 |
|
DIN EN 13308 |
Tanks for transport of dangerous goods - Service equipment for tanks - Non-pressure balanced footvalve |
|
DIN EN 13314 |
Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover |
|
DIN EN 13315 |
Tanks for transport of dangerous goods - Service equipment for tanks - Gravity discharge coupler |
|
DIN EN 13316 |
Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve |
|
DIN EN 13317 |
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly |
|
DIN EN 13317 |
Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly (includes Amendment A1:2006) |
|
DIN EN 13342 |
Characterization of sludges - Determination of Kjeldahl nitrogen; English version of DIN EN 13342 |
|
DIN EN 13346 |
Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods; English version of DIN EN 13346 |
|
DIN EN 13356 |
Visibility accessories for non-professional use - Test methods and requirements; English version of DIN EN 13356 |
|
DIN EN 13370 |
Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, CN- easily liberatable, F- |
|
DIN EN 13374 |
Temporary edge protection systems - Product specification, test methods |
|
DIN EN 13427 |
Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste |
|
DIN EN 13428 |
Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction |
|
DIN EN 13429 |
Packaging - Reuse |
|
DIN EN 13430 |
Packaging - Requirements for packaging recoverable by material recycling |
|
DIN EN 13431 |
Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value |
|
DIN EN 13433 |
Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A |
|
DIN EN 13437 |
Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart |
|
DIN EN 13440 |
Packaging - Rate of recycling - Definition and method of calculation |
|
DIN EN 13443-1 |
Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm; Requirements for performances and safety, testing |
|
DIN EN 13443-2 |
Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing |
|
DIN EN 13444-1 |
Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Part 1: Thermic electrical hybrid vehicles |
|
DIN EN 13463-1 |
Non-electrical equipment for potentially explosive atmospheres - Part 1: Basic method and requirements |
|
DIN EN 13463-2 |
Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr' |
|
DIN EN 13463-3 |
Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure |
|
DIN EN 13463-5 |
Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety |
|
DIN EN 13463-6 |
Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source |
|
DIN EN 13478 |
Safety of machinery - Fire prevention and protection |
|
DIN EN 13484 |
Helmets for users of luges |
|
DIN EN 13490 |
Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration; English version of DIN EN 13490 |
|
DIN EN 13501-2 |
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
|
DIN EN 13501-3 |
Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers |
|
DIN EN 13501-4 |
Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems |
|
DIN EN 13501-5 |
Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
|
DIN EN 13506 |
Water quality - Determination of mercury by atomic fluorescence spectrometry |
|
DIN EN 13528-1 |
Ambient air quality - Diffuse samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements |
|
DIN EN 13528-3 |
Ambient air quality - Diffuse samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance |
|
DIN EN 13541 |
Glass in building - Security glazing - Testing and classification of resistance against explosion pressure; English version of DIN EN 13541 |
|
DIN EN 13546 |
Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goalkeepers, and shin protectors for field players - Requirements and test methods |
|
DIN EN 13565-1 |
Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components |
|
DIN EN 13567 |
Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods |
|
DIN EN 13592 |
Plastics sacks for household waste collection - Types, requirements and test methods |
|
DIN EN 13593 |
Packaging - Paper sacks for household waste collection - Types, requirements and test methods |
|
DIN EN 13594 |
Protective gloves for professional motorcycle riders - Requirements and test methods |
|
DIN EN 13595-1 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 1: General requirements |
|
DIN EN 13595-2 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 2: Test method for determination of impact abrasion resistance |
|
DIN EN 13595-3 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 3: Test method for determination of burst strength |
|
DIN EN 13595-4 |
Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 4: Test method for determination of impact cut resistance |
|
DIN EN 136 |
Respiratory protective devices - Full-face masks - Requirements, testing and marking |
|
DIN EN 1363-1 |
Fire resistance tests - Part 1: General requirements |
|
DIN EN 1363-2 |
Fire resistance tests - Part 2: Alternative and additional procedures |
|
DIN EN 13634 |
Protective footwear for professional motorcycle riders - Requirements and test methods |
|
DIN EN 1364-1 |
Fire resistance tests for non-loadbearing elements - Part 1: Walls |
|
DIN EN 1364-2 |
Fire resistance tests for non-loadbearing elements - Part 2: Ceilings |
|
DIN EN 1364-3 |
Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly) |
|
DIN EN 13648-2 |
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service |
|
DIN EN 13649 |
Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method; English version of DIN EN 13649 |
|
DIN EN 1365-1 |
Fire resistance tests for loadbearing elements - Part 1: Walls |
|
DIN EN 1365-2 |
Fire resistance tests for leadbearing elementess - Part 2: Floors and roofs; English version of DIN EN 1365-2 |
|
DIN EN 1365-3 |
Fire resistance tests for loadbearing elements - Part 3: Beams; English version of DIN EN 1365-3 |
|
DIN EN 1365-4 |
Fire resistance tests for loadbearing elements - Part 4: Columns |
|
DIN EN 1365-5 |
Fire resistance tests for loadbearing elements - Part 5: Balconies and walkways |
|
DIN EN 1365-6 |
Fire resistance tests for loadbearing elements - Part 6: Stairs |
|
DIN EN 1366-1 |
Fire resistance tests for service installations - Part 1: Ducts |
|
DIN EN 1366-2 |
Fire resistance tests for service installations - Part 2: Fire dampers |
|
DIN EN 1366-3 |
Fire resistance tests for service installations - Part 3: Penetration seals |
|
DIN EN 1366-4 |
Fire resistance tests for service installations - Part 4: Linear joint seals |
|
DIN EN 1366-5 |
Fire resistance tests for service installations - Part 5: Service ducts and shafts |
|
DIN EN 1366-6 |
Fire resistance tests for service installations - Part 6: Raised access and hollow core floors |
|
DIN EN 1366-7 |
Fire resistance tests for service installations - Part 7: Conveyor systems and their closures |
|
DIN EN 1366-8 |
Fire resistance tests for service installations - Part 8: Smoke extraction ducts |
|
DIN EN 13673-1 |
Determination of the maximum explosion pressure and the maximum pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure |
|
DIN EN 13673-2 |
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise |
|
DIN EN 13725 |
Air quality - Determination of odour concentration by dynamic olfactometry |
|
DIN EN 13725 Berichtigung 1 |
Air quality - Determination of odour concentration by dynamic olfactometry; Corrigenda to DIN EN 13725:2003-07 |
|
DIN EN 13772 |
Textiles and textile products - Burning behaviour of curtains and drapes - Measurement of flame spread of vertically oriented specimens with large ignition source |
|
DIN EN 13773 |
Textiles and textile products - Burning behaviour of curtains and drapes - Classification scheme |
|
DIN EN 13781 |
Protective helmets for drivers and passengers of snowmobiles and bobsleighs |
|
DIN EN 13794 |
Respiratory protective devices - Self-contained closed-circuit breathing apparatus for escape - Requirements, testing, marking |
|
DIN EN 13819-1 |
Hearing protectors - Testing - Part 1: Physical test methods |
|
DIN EN 13819-2 |
Hearing protectors - Testing - Part 2: Acoustic test methods |
|
DIN EN 13821 |
Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures |
|
DIN EN 13823 |
Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
|
DIN EN 13832-1 |
Footwear protecting against chemicals - Part 1: Terminology and test methods |
|
DIN EN 1384 |
Helmets for equestrian activities |
|
DIN EN 1384/A1 |
Helmets for equestrian activities; Amendment A1; English version of DIN EN 1384:1996/A1:2001 |
|
DIN EN 1385 |
Helmets for canoeing and whitewater sports (includes amendment A1:2005) |
|
DIN EN 13890 |
Workplace atmospheres - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods |
|
DIN EN 13911 |
Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters |
|
DIN EN 13920-1 |
Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests |
|
DIN EN 13920-10 |
Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of used aluminium beverage cans |
|
DIN EN 13920-11 |
Aluminium and aluminium alloys - Scrap - Part 11: Scrap from aluminium-copper radiators |
|
DIN EN 13920-12 |
Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy |
|
DIN EN 13920-13 |
Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys |
|
DIN EN 13920-15 |
Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings |
|
DIN EN 13920-16 |
Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics |
|
DIN EN 13920-3 |
Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap |
|
DIN EN 13920-4 |
Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy |
|
DIN EN 13920-5 |
Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series |
|
DIN EN 13920-7 |
Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings |
|
DIN EN 13920-9 |
Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials |
|
DIN EN 13922 |
Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels |
|
DIN EN 13946 |
Water quality - Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers |
|
DIN EN 13949 |
Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking |
|
DIN EN 13965-1 |
Characterization of waste - Terminology - Part 1: Material related terms and definitions; Trilingual version EN 13965-1:2004 |
|
DIN EN 13965-2 |
Characterization of waste - Terminology - Part 2: Management related terms and definitions; Trilingual version EN 13965-2:2004 |
|
DIN EN 13980 |
Potentially explosive atmospheres - Application of quality systems |
|
DIN EN 1399 |
Resilient floor coverings - Determination of resistance to stubbed and burning cigarettes |
|
DIN EN 140 |
Respiratory protective devices - Half masks and quarter masks - Requirements, testing, marking |
|
DIN EN 14011 |
Water quality - Sampling of fish with electricity |