|
DIN EN 14021 |
Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods |
|
DIN EN 14025 |
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction |
|
DIN EN 14034-1 |
Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
|
DIN EN 14034-2 |
Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
|
DIN EN 14034-3 |
Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds |
|
DIN EN 14034-4 |
Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
|
DIN EN 14039 |
Characterization of waste - Determination of hydrocarbon content in the range of C10 to C40 by gas chromatography; |
|
DIN EN 14042 |
Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents |
|
DIN EN 14043 |
High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods |
|
DIN EN 14044 |
High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods |
|
DIN EN 14045 |
Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions |
|
DIN EN 14046 |
Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide |
|
DIN EN 14052 |
High performance industrial helmets |
|
DIN EN 14058 |
Protective clothing - Garments for protection against cool environments |
|
DIN EN 14095 |
Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance and safety, testing |
|
DIN EN 14115 |
Textiles - Burning behaviour of materials for marquees, large tents and related products - Ease of ignition; English version of DIN EN 14115 |
|
DIN EN 14116 |
Tanks for transport of dangerous goods - Digital interface for the product recognition device |
|
DIN EN 14120 |
Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods |
|
DIN EN 14135 |
Coverings - Determination of fire protection ability |
|
DIN EN 14143 |
Respiratory equipment - Self-contained re-breathing diving apparatus |
|
DIN EN 14181 |
Stationary source emissions - Quality assurance of automated measuring systems |
|
DIN EN 14184 |
Water quality - Guidance standard for the surveying of aquatic macrophytes in running waters |
|
DIN EN 14187-7 |
Cold applied joint sealants - Part 7: Test method for the determination of the resistance to flame |
|
DIN EN 142 |
Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking |
|
DIN EN 1420-1 |
Determination of odour and flavour assessment of water in piping systems - Part 1: Test method |
|
DIN EN 14207 |
Water quality - Determination of epichlorohydrin |
|
DIN EN 14211 |
Ambient air quality - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
|
DIN EN 14212 |
Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
|
DIN EN 14243 |
(DRAFT) Post-consumer tyre - Materials and applications; English version prEN 14243:2004 |
|
DIN EN 14246 |
Gypsum elements for suspended ceilings - Definitions, requirements and test methods |
|
DIN EN 14253 |
Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance |
|
DIN EN 143 |
Respiratory protective devices - Particle filters - Requirements, testing, marking (includes Corrigendum AC:2005 + Amendment A1:2006) |
|
DIN EN 143 |
Respiratory protective devices - Particle filters - Requirements, testing, marking; English version of DIN EN 143 |
|
DIN EN 14325 |
Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages |
|
DIN EN 14326 |
Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame |
|
DIN EN 14328 |
Protective clothing - Gloves and armguards protecting against cuts by powered knives - Requirements and test methods |
|
DIN EN 14339 |
Underground fire hydrants |
|
DIN EN 14345 |
Characterization of waste - Determination of hydrocarbon content by gravimetry |
|
DIN EN 14346 |
Characterization of waste - Calculation of dry matter by determination of dry residue or water content |
|
DIN EN 14360 |
Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets |
|
DIN EN 14373 |
Explosion suppression systems |
|
DIN EN 14385 |
Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V |
|
DIN EN 14390 |
Fire test - Large-scale room reference test for surface products |
|
DIN EN 14395-1 |
Influence of organic materials on water intended for human consumption - Organoleptic assessment of water in storage systems - Part 1: Test method |
|
DIN EN 14404 |
Personal protective equipment - Knee protectors for work in the kneeling position |
|
DIN EN 14407 |
Water quality - Guidance standard for the identification, enumeration and interpretation of benthic diatom samples from running waters |
|
DIN EN 144-1 |
Respiratory protective devices - Gas cylinder valves - Part 1: Thread connections for insert connector |
|
DIN EN 14412 |
Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance |
|
DIN EN 144-2 |
Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections |
|
DIN EN 144-3 |
Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for diving gases Nitrox and oxygen |
|
DIN EN 14432 |
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves |
|
DIN EN 14433 |
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valves |
|
DIN EN 14434 |
Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods |
|
DIN EN 14435 |
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only - Requirements, testing, marking |
|
DIN EN 14450 |
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets |
|
DIN EN 14451 |
Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A |
|
DIN EN 14453 |
Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C |
|
DIN EN 14454 |
Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H; type A |
|
DIN EN 14455 |
Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 - Family L, type A and type B |
|
DIN EN 14458 |
Personal eye-equipment - Faceshields and visors for use with firefighters' and high performance industrial safety helmets used by firefighters, ambulance and emergency services |
|
DIN EN 14460 |
Explosion resistant equipment |
|
DIN EN 14466 |
Fire fighting pumps - Portable pumps - Safety and performance requirements, tests |
|
DIN EN 14470-1 |
Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids |
|
DIN EN 14470-2 |
Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders |
|
DIN EN 14491 |
Dust explosion venting protective systems |
|
DIN EN 145 |
Self-contained closed-circuit breathing apparatus, compressed oxygen or compressed oxygen/nitrogen type - Requirements, testing, marking (includes Amendment A1:2000); English version of DIN EN 145:1997 + A1:2000 |
|
DIN EN 14506 |
Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C |
|
DIN EN 14512 |
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole covers and neckrings with pivoting bolts |
|
DIN EN 14513 |
Transportable gas cylinders - Bursting disc pressure relief devices (excluding acetylene gas cylinders) |
|
DIN EN 14522 |
Determination of the auto ignition temperature of gases and vapours |
|
DIN EN 14529 |
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
|
DIN EN 14530 |
Workplace atmospheres - Determination of diesel particulate matter - General requirements |
|
DIN EN 14533 |
Textiles and textile products - Burning behaviour of bedding items - Classification scheme |
|
DIN EN 14564 |
Tanks for transport of dangerous goods - Terminology |
|
DIN EN 14572 |
High Performance Helmets for Equestrian Activities |
|
DIN EN 14583 |
Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods |
|
DIN EN 14591-1 |
Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar-explosion proof ventilation structure |
|
DIN EN 14593-1 |
Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 1: Apparatus with a full face mask - Requirements, testing, marking |
|
DIN EN 14593-2 |
Respiratory protective devices - Compressed air line breathing with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking |
|
DIN EN 14594 |
Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking |
|
DIN EN 14595 |
Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and vacuum breather vent |
|
DIN EN 14596 |
Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve |
|
DIN EN 14604 |
Smoke alarm devices |
|
DIN EN 14605 |
Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
|
DIN EN 14614 |
Water quality - Guidance standard for assessing the hydromorphological features of rivers |
|
DIN EN 14622 |
Devices to prevent pollution by backflow of potable water - Air gap with circular overflow (restricted) - Family A, type F |
|
DIN EN 14623 |
Devices to prevent pollution by backflow of potable water - Air gaps with minimum circular overflow (verified by test or measurement) - Family A, type G |
|
DIN EN 14625 |
Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry |
|
DIN EN 14626 |
Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy |
|
DIN EN 14662-1 |
Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography |
|
DIN EN 14662-2 |
Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography |
|
DIN EN 14662-3 |
Ambient air quality - Standard method for measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography |
|
DIN EN 14662-4 |
Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography |
|
DIN EN 14662-5 |
Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography |
|
DIN EN 14671 |
Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride |
|
DIN EN 14672 |
Characterization of sludges - Determination of total phosphorus |
|
DIN EN 14701-1 |
Characterisation of sludges - Filtration properties - Part 1: Capillary suction time (CST) |
|
DIN EN 14701-2 |
Characterization of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration |
|
DIN EN 14701-3 |
Characterization of sludges - Filtration properties - Part 3: Determination of the compressibility |
|
DIN EN 14702-1 |
Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index) |
|
DIN EN 14702-2 |
Characterisation of sludges - Settling properties - Part 2: Determination of thickenability |
|
DIN EN 14710-1 |
Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements |
|
DIN EN 14710-2 |
Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements |
|
DIN EN 14717 |
Welding and allied processes - Environmental check list |
|
DIN EN 14718 |
Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method |
|
DIN EN 14735 |
Characterization of waste - Preparation of waste samples for ecotoxicity tests |
|
DIN EN 14735 Berichtigung 1 |
Characterization of waste - Preparation of waste samples for ecotoxicity tests; German version EN 14735:2005, Corrigenda to DIN EN 14735:2005-11 |
|
DIN EN 14750-1 |
Railway applications - Air conditioning for urban and suburban rolling stock - Part 1: Comfort parameters |
|
DIN EN 14756 |
Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours |
|
DIN EN 14757 |
Water quality - Sampling of fish with multi-mesh gillnets |
|
DIN EN 14786 |
Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test |
|
DIN EN 14790 |
Stationary source emissions - Determination of the water vapour in ducts |
|
DIN EN 14791 |
Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method |
|
DIN EN 14792 |
Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence |
|
DIN EN 14797 |
Explosion venting devices |
|
DIN EN 14799 |
(DRAFT) Air filters for general air cleaning - Terminology; Trilingual version prEN 14799:2003 |
|
DIN EN 14799 |
Air filters for general air cleaning - Terminology; Trilingual version EN 14799:2006 |
|
DIN EN 14803 |
Identification and/or determination of the quantity of waste |
|
DIN EN 14806 |
Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test |
|
DIN EN 14812 |
Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing |
|
DIN EN 1483 |
Water quality - Determination of mercury |
|
DIN EN 1484 |
Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) in water |
|
DIN EN 14851 |
Aerosol containers - Aerosol foam flammability test |
|
DIN EN 14852 |
Aerosol containers - Determination of the ignition distance of the spray jet |
|
DIN EN 14853 |
Aerosol containers - Enclosed space ignition test |
|
DIN EN 1486 |
Protective clothing for firefighters - Test methods and requirements for reflective clothing for specialized firefighting |
|
DIN EN 14884 |
Air quality - Stationary source emissions - Determination of total mercury: Automated measuring systems |
|
DIN EN 14897 |
Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing |
|
DIN EN 14898 |
Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing |
|
DIN EN 14899 |
Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a sampling plan |
|
DIN EN 149 |
Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking; English version of DIN EN 149:2001 |
|
DIN EN 14902 |
Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter |
|
DIN EN 14907 |
Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter |
|
DIN EN 14944-1 |
Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters |
|
DIN EN 1496 |
Personal fall protection equipment - Rescue lifting devices |
|
DIN EN 1496 |
Rescue equipment - Rescue lifting devices |
|
DIN EN 14962 |
Water quality - Guidance on the scope and selection of fish sampling methods |
|
DIN EN 14968 |
Semantics for groundwater data interchange |
|
DIN EN 1497 |
Rescue equipment - Rescue harnesses |
|
DIN EN 14973 |
Conveyor belts for use in underground installations - Electrical and flammability safety requirements |
|
DIN EN 1498 |
Personal fall protection equipment - Rescue loops |
|
DIN EN 1498 |
Rescue equipment - Rescue loops |
|
DIN EN 14987 |
Plastics - Evaluation of disposability in waste water treatment plants - Test scheme for final acceptance and specifications |
|
DIN EN 14995 |
Plastics - Evaluation of compostability - Test scheme and specifications |
|
DIN EN 15002 |
Characterization of waste - Preparation of test portions from the laboratory sample |
|
DIN EN 15051 |
Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods |
|
DIN EN 15058 |
Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method: Non-dispersive infrared spectrometry |
|
DIN EN 15090 |
Footwear for firefighters |
|
DIN EN 15110 |
Water quality - Guidance standard for the sampling of zooplankton from standing waters |
|
DIN EN 15132 |
Container shells for mobile waste containers with a capacity up to 1700 l - Performance requirements and test methods |
|
DIN EN 15144 |
(DRAFT) Winter maintenance equipment - Terminology - Terms used for winter maintenance equipment; Trilingual version prEN 15144:2005 |
|
DIN EN 15169 |
Characterization of waste - Determination of loss on ignition in waste, sludge and sediments |
|
DIN EN 15192 |
Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection |
|
DIN EN 15196 |
Water quality - Guidance on sampling and processing of the pupal exuviae of Chironomidae (Order Diptera) for ecological assessment |
|
DIN EN 15204 |
Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermoehl technique) |
|
DIN EN 15219 |
Water equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing |
|
DIN EN 1522 |
Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification |
|
DIN EN 1523 |
Windows, doors, shutters and blinds - Bullet resistance - Test method |
|
DIN EN 1540 |
Workplace atmospheres - Terminology; Trilingual version EN 1540:1998 |
|
DIN EN 1568-1 |
Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids; English version of DIN EN 1568-1 |
|
DIN EN 1568-2 |
Fire extinguishing media - Foam concentrates - Part 2: Specifications for high expansion foam concentrates for surface application to water-immiscible liquids; English version of DIN EN 1568-2 |
|
DIN EN 1568-3 |
Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids; English version of DIN EN 1568-3 |
|
DIN EN 1568-4 |
Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids; English version of DIN EN 1568-4 |
|
DIN EN 1598 |
Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes (includes Amendment A1:2001); English version of DIN EN 1598:1997 + A1:2001 |
|
DIN EN 1621-1 |
Motorcyclists' protective clothing against mechanical impact - Part 1: Requirements and test methods for impact protectors |
|
DIN EN 1621-2 |
Motorcyclists' protective clothing against mechanical impact - Part 2: Motorcyclists' back protectors; Requirements and test methods |
|
DIN EN 1622 |
Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN) |
|
DIN EN 1625 |
Burning behaviour of industrial and technical textiles - Procedure to determine the ignitability of vertically oriented specimens |
|
DIN EN 1634-1 |
Fire resistance tests for door and shutter assemblies - Part 1: Fire doors and shutters; English version of DIN EN 1634-1 |
|
DIN EN 1634-3 |
Fire resistance tests for door and shutter assemblies - Part 3: Smoke control doors and shutters |
|
DIN EN 165 |
Personal eye-protection - Vocabulary; Trilingual version EN 165:2005 |
|
DIN EN 166 |
Personal eye protection - Specifications; English version of DIN EN 166 |
|
DIN EN 167 |
Personal eye protection - Optical test methods; English version of DIN EN 167 |
|
DIN EN 169 |
Personal eye protection - Filters for welding and related techniques - Transmittance requirements and recommended use |
|
DIN EN 171 |
Personal eye protection - Infrared filters - Transmittance requirements and recommended use |
|
DIN EN 1717 |
Protection against pollution of potable water installations and general requirements of devices to prevent pollution by backflow - (DVGW Code of practice); English version of DIN EN 1717 |
|
DIN EN 1731 |
Mesh type eye and face protectors for industrial and non-industrial use against mechanical hazards and/or heat (includes Amendment A1:1997) |
|
DIN EN 1731 |
Personal eye protection - Mesh eye and face protectors |
|
DIN EN 1746 |
Safety of machinery - Guidance for the drafting of the noise clauses of safety standards |
|
DIN EN 175 |
Personal protection - Equipment for eye and face protection during welding and allied processes |
|
DIN EN 1760-2 |
Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars; English version of DIN EN 1760-2 |
|
DIN EN 1760-3 |
Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices |
|
DIN EN 1777 |
Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
|
DIN EN 1822-1 |
High efficiency air filters (HEPA and ULPA) - Part 1: Classification, performance testing, marking |
|
DIN EN 1822-2 |
High efficiency air filters (HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics |
|
DIN EN 1822-3 |
High efficiency air filters (HEPA and ULPA) - Part 3: Testing flat sheet filter media |
|
DIN EN 1822-4 |
High efficiency particulate air filters (HEPA and ULPA) - Part 4: Determining leakage of filter elements (Scan method); English version of DIN EN 1822-4 |
|
DIN EN 1822-5 |
High efficiency particulate air filters (HEPA and ULPA) - Part 4: Determining the efficiency of filter elements; English version of DIN EN 1822-5 |
|
DIN EN 1825-1 |
Grease separators - Part 1: Principles of design, performance and testing, marking and quality control |
|
DIN EN 1825-2 |
Grease separators - Part 2: Selection of nominal size, installation, operation and maintenance; English version of DIN EN 1825-2 |
|
DIN EN 1827 |
Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking |
|
DIN EN 1834-1 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres; English version of DIN EN 1834-1 |
|
DIN EN 1834-2 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust; English version of DIN EN 1834-2 |
|
DIN EN 1834-3 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres; English version of DIN EN 1834-3 |
|
DIN EN 1836 |
Personal eye-equipment - Sunglasses and sunglare filters for general use and filters for direct observation of the sun |
|
DIN EN 1837 |
Safety of machinery - Integral lighting of machines |
|
DIN EN 1839 |
Determination of explosion limits of gases and vapours |
|
DIN EN 1846-1 |
Fire fighting and rescue service vehicles - Part 1: Nomenclature and designation |
|
DIN EN 1846-2 |
Firefighting and rescue service vehicles - Part 2: Common requirements; Safety and performance; English version of DIN EN 1846-2 |
|
DIN EN 1846-2/A1 |
Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
|
DIN EN 1846-2/A2 |
Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
|
DIN EN 1846-3 |
Firefighting and rescue service vehicles - Part 3: Permanently installed equipment; Safety and performance |
|
DIN EN 1868 |
Personal protective equipment against falls from a height - List of equivalent terms; German version EN 1868:1997 |
|
DIN EN 1891 |
Personal protective equipment for prevention of falls from a height - Low stretch kernmantel ropes |
|
DIN EN 1899-1 |
Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea acid addition (ISO 5815:1989, modified); German version EN 1899-1:1998 |
|
DIN EN 1899-2 |
Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted samples (ISO 5815:1989, modified); German version EN 1899-2:1998 |
|
DIN EN 1911-1 |
Stationary source emissions - Manual method of determination of HCl - Part 1: Sampling of gases |
|
DIN EN 1911-2 |
Stationary source emissions - Manual method of determination of HCl - Part 2: Gaseous compounds absorption |
|
DIN EN 1911-3 |
Stationary source emissions - Manual method of determination of HCl - Part 3: Absorption solutions analysis and calculation |
|
DIN EN 1938 |
Personal eye protection - Goggles for motorcycle and moped users |
|
DIN EN 1947 |
Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
|
DIN EN 1948-1 |
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs |
|
DIN EN 1948-2 |
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 2: Extraction and clean-up of PCDDs/PCDFs |
|
DIN EN 1948-3 |
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs |
|
DIN EN 1987-3 |
Electrically propelled road vehicles - Specific requirements for safety - Part 3: Protection of users against electrical hazards; English version of DIN EN 1987-3 |
|
DIN EN 1991-1-2 |
Eurocode 1 - Actions on structures - Part 1-2: General actions; Actions on structures exposed to fire |
|
DIN EN 1993-1-2 |
Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design |
|
DIN EN 1995-1-2 |
Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design |
|
DIN EN 1996-1-2 |
Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design |
|
DIN EN 2 |
Classification of fires |
|
DIN EN 24869-3 |
Hearing protectors; simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes (ISO/TR 4869-3:1989) |
|
DIN EN 250 |
Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing, marking |
|
DIN EN 25663 |
Water quality; determination of Kjeldahl nitrogen; method after mineralization with selenium (ISO 5663:1984); German version EN 25663:1993 |
|
DIN EN 25813 |
Water quality; determination of dissolved oxygen; iodometric method (ISO 5813:1983); german version EN 25813:1992 |
|
DIN EN 25814 |
Water quality; determination of dissolved oxygen by the electrochemical probe method (ISO 5814:1990); german version EN 25814:1992 |
|
DIN EN 25923 |
Fire protection; fire extinguishing media; carbon dioxide (ISO 5923:1989) |
|
DIN EN 26184-1 |
Explosion protection systems - Part 1: Determination of explosion indices of combustible dust in air (ISO 6184-1:1985); german version EN 26184-1:1991 |
|
DIN EN 26184-2 |
Explosion protection systems - Part 2: Determination of explosion indices of combustible gases in air (ISO 6184-2:1985); german version EN 26184-2:1991 |
|
DIN EN 26184-3 |
Explosion protection systems - Part 3: Determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures (ISO 6184-3:1985); german version EN 26184-3:1991 |
|
DIN EN 26184-4 |
Explosion protection systems - Part 4 : Determination of efficacy of explosion suppression systems (ISO 6184-4:1985); german version EN 26184-4:1991 |
|
DIN EN 26595 |
Water quality; determination of total arsenic; silver diethyldithiocarbamate spectrophotometric method (ISO 6595:1982); german version EN 26595:1992 |
|
DIN EN 27243 |
Hot environments; estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) (ISO 7243:1989); German version EN 27243:1993 |
|
DIN EN 27828 |
Methods of biological sampling of water - Guidance on handnet sampling of aquatic benthic macro-invertebrates (ISO 7828:1985) |
|
DIN EN 27888 |
Water quality; determination of electrical conductivity (ISO 7888:1985); German version EN 27888:1993 |
|
DIN EN 2824 |
(DRAFT) Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials; test equipment, apparatus and media |
|
DIN EN 2825 |
(DRAFT) Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density |
|
DIN EN 2826 |
(DRAFT) Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke |
|
DIN EN 28662-1 |
Hand-held portable power tools; measurement of vibrations at the handle; part 1: general (ISO 8662-1:1988); german version EN 28662-1:1992 |
|
DIN EN 29241-2 |
Ergonomic requirements for office work with visual display terminals (VDTs); part 2: guidance on task requirements (ISO 9241-2:1992); German version EN 29241-2:1993 |
|
DIN EN 3-3 |
Portable fire extinguishers - Construction, resistance to pressure, mechanical tests |
|
DIN EN 341 |
Personal protective equipment against falls from a height; descender devices; german version EN 341:1992 |
|
DIN EN 342 |
Protective clothing - Ensembles and garments for protection against cold |
|
DIN EN 343 |
Protective clothing - Protection against rain |
|
DIN EN 3475-407 |
Aerospace series - Cable, electrical, aircraft use - Test methods - Part 407: Flammability; German and English version EN 3475-407:2005 |
|
DIN EN 348 |
Protective clothing; test method; determination of behaviour of materials on impact of small splashes of molten metal; german version EN 348:1992 |
|
DIN EN 352-2 |
Hearing protectors - General requirements - Part 2: Ear-plugs |
|
DIN EN 352-3 |
Hearing protectors - General requirements - Part 3: Ear-muffs attached to an industrial safety helmet |
|
DIN EN 352-4 |
Hearing protectors - Safety requirements and testing - Part 4: Level-dependent ear-muffs |
|
DIN EN 352-5 |
Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs |
|
DIN EN 352-6 |
Hearing protectors - Safety requirements and testing - Part 6: Ear-muffs with electrical audio input |
|
DIN EN 352-7 |
Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs |
|
DIN EN 353-1 |
Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line |
|
DIN EN 353-2 |
Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line |
|
DIN EN 354 |
Personal protective equipment against falls from a height - Lanyards |
|
DIN EN 355 |
Personal protective equipment against falls from a height - Energy absorbers |
|
DIN EN 356 |
Glass in building - Security glazing - Testing and classification of resistance against manual attack; English version of DIN EN 356 |
|
DIN EN 357 |
Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance |
|
DIN EN 358 |
Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning alnyards; English version of DIN EN 358 |
|
DIN EN 360 |
Personal protective equipment against falls from a height - Retractable type fall arresters |
|
DIN EN 361 |
Personal protective equipment against falls from a height - Full body harnesses |
|
DIN EN 362 |
Personal protective equipment against falls from a height - Connectors |
|
DIN EN 363 |
Personal protective equipment against falls from a height - Fall arrest systems |
|
DIN EN 364 |
Personal protective equipment against falls from a height; test methods; german version EN 364:1992 |
|
DIN EN 365 |
Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging |
|
DIN EN 367 |
Protective clothing; protection against heat and flames; test method: determining of the heat transmission on exposure to flame; german version EN 367:1992 |
|
DIN EN 3-7 |
Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods |
|
DIN EN 373 |
Protective clothing; assessment of resistance of materials to molten metal splash; German version EN 373:1993 |
|
DIN EN 374-1 |
Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements |
|
DIN EN 374-2 |
Protective gloves against chemicals and micro-organisms - Part 2: Determination of resistance to penetration |
|
DIN EN 374-3 |
Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals |
|
DIN EN 374-3 Berichtigung 1 |
Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals; Corrigenda 1 to EN 374-3:2003 |
|
DIN EN 379 |
Personal eye protection - Automatic welding filters |
|
DIN EN 3-8 |
Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar |
|
DIN EN 381-1 |
Protective clothing for users of hand held chain saws; part 1: test rig for testing resistance to cutting by a chain saw; German version EN 381-1:1993 |
|
DIN EN 381-10 |
Protective clothing for users of hand-held chainsaws - Part 10: Test method for upper body protectors |
|
DIN EN 381-11 |
Protective clothing for users of hand-held chainsaws - Part 11: Requirements for upper body protectors |
|
DIN EN 381-2 |
Protective clothing for users of hand-held chain saws - Test methods for leg protectors |
|
DIN EN 381-3 |
Protective clothing for users of hand-held chain saws - Test methods for footwear |
|
DIN EN 381-4 |
Protective clothing for users of hand-held chain saws - Part 4: Test methods for chain saw protective gloves |
|
DIN EN 381-5 |
Protective clothing for users of hand-held chain saws - Requirements for leg protectors |
|
DIN EN 381-7 |
Protective clothing for users of hand-held chain saws - Part 7: Requirements for chain saw protective gloves |
|
DIN EN 381-8 |
Protective clothing for users of hand-held chain saws - Part 8: Test methods for chain saw protective gaiters; German version EN 381-8:1997 |
|
DIN EN 381-9 |
Protective clothing for users of hand-held chain saws - Part 9: Requirements for chain saw protective gaiters; German version EN 381-9:1997 |
|
DIN EN 3844-1 |
(DRAFT) Aerospace series - Flammability of non-metallic materials - Part 1: Small burner test, vertical; determination of the vertical flame propagation |
|
DIN EN 3844-2 |
(DRAFT) Aerospace series - Flammability of non-metallic materials - Part 2: Small burner test, horizontal; determination of the horizontal flame propagation |
|
DIN EN 3844-3 |
(DRAFT) Aerospace series - Flammability of non-metallic materials - Part 3: Small burner test, 45°; determination of the resistance of material to flame and glow propagation and to flame penetration |
|
DIN EN 388 |
Protective gloves against mechanical risks |
|
DIN EN 3-9 |
Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers |
|
DIN EN 397 |
Industrial safety helmets (includes Amendment A1:2000); English version of DIN EN 397:1995 + A1:2000 |
|
DIN EN 402 |
Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking |
|
DIN EN 403 |
Respiratory protective devices for self-rescue - Filtering devices with hood for escape from fire - Requirements, testing, marking |
|
DIN EN 405 |
Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking; English version of DIN EN 405 |
|
DIN EN 4057-302 |
(DRAFT) Aerospace series - Cable ties for harnesses; Test methods - Part 302: Flammability |
|
DIN EN 407 |
Protective gloves against thermal risks (heat and/or fire) |
|
DIN EN 420 |
Protective gloves - General requirements and test methods |
|
DIN EN 421 |
Protective gloves against ionizing radiation and radioactive contamination |
|
DIN EN 45510-4-1 |
Guide to procurement of power station equipment - Part 4-1: Boiler auxiliaries - Equipment for reduction of dust emissions |
|
DIN EN 45510-4-10 |
Guide for procurement of power station equipment - Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NOx) plant |
|
DIN EN 45510-4-6 |
Guide to procurement of power station equipment - Part 4-6: Boiler auxiliaries - Flue gas desulphurization (DeSOx) plant |
|
DIN EN 458 |
Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document |