|
DIN EN ISO 8662-13 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders (ISO 8662-13:1997) |
|
DIN EN ISO 8662-14 |
Hand-held portable power tools; measurement of vibrations at the handle - Part 14: Stone-working tools and needle scalers (ISO 8662-14:1996); German version EN ISO 8662-14:1996 |
|
DIN EN ISO 8662-6 |
Hand-held portable power tools - Measurement of vibrations at the handle - Impact drills (ISO 8662-6:1994) |
|
DIN EN ISO 8662-7 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action (ISO 8662-7:1997) |
|
DIN EN ISO 8662-9 |
Hand-held portable power tools; measurement of vibrations at the handle - Part 9: Rammers (ISO 8662-9:1996); Deutsche Fassung EN ISO 8662-9:1996 |
|
DIN EN ISO 8689-1 |
Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-1:2000); English version of DIN EN ISO 8689-1 |
|
DIN EN ISO 8689-2 |
Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates (ISO 8689-2:2000); English version of DIN EN ISO 8689-2 |
|
DIN EN ISO 8996 |
Ergonomics of the thermal environment - Determination of metabolic rate (ISO 8996:2004) |
|
DIN EN ISO 9038 |
Test for sustained combustibility of liquids (ISO 9038:2002) |
|
DIN EN ISO 9094-1 |
Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m (ISO 9094-1:2003) |
|
DIN EN ISO 9094-2 |
Small craft - Fire protection - Part 2: Craft with a hull length of over than 15 m (ISO 9094-2:2002) |
|
DIN EN ISO 9169 |
Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006) |
|
DIN EN ISO 9239-1 |
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2002) |
|
DIN EN ISO 9241-1 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 1: General introduction (ISO 9241-1:1997, including Amendment AMD 1:2001); English version of DIN EN ISO 9241-1:1997 + A1:2001 |
|
DIN EN ISO 9241-4 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 4: Keyboard requirements (ISO 9241-4:1998) |
|
DIN EN ISO 9241-400 |
Ergonomics of human-system interaction - Part 400: Principles and requirements for physical input devices (ISO 9241-400:2007) |
|
DIN EN ISO 9241-5 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements (ISO 9241-5:1998) |
|
DIN EN ISO 9241-8 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 8: Requirements for displayed colours (ISO 9241-8:1997) |
|
DIN EN ISO 9377-2 |
Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography (ISO 9377-2:2000); English version of DIN EN ISO 9377-2 |
|
DIN EN ISO 9391 |
Sampling in deep waters for macro-invertebrates - Guidance on the use of colonization, qualitative and quantitative samplers (ISO 9391:1993) |
|
DIN EN ISO 9408 |
Evaluation of ultimate aerobic biodegradability of organic compounds in an aqueous medium by determination of oxygen demand in a closed respirometer (ISO 9408:1999) |
|
DIN EN ISO 9439 |
Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test (ISO 9439:1999); English version of DIN EN ISO 9439 |
|
DIN EN ISO 9509 |
Water quality - Toxicity test for assessing the inhibition of nitrification of activated sludge microorganisms (ISO 9509:2006) |
|
DIN EN ISO 9562 |
Water quality - Determination of adsorbable organically bound halogens (AOX) (ISO 9562:2004) |
|
DIN EN ISO 9886 |
Ergonomics - Evaluation of thermal strain by physiological measurements (ISO 9886:2004) |
|
DIN EN ISO 9888 |
Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Static test (Zahn-Wellens method) (ISO 9888:1999) |
|
DIN EN ISO 9920 |
Ergonomics of the thermal environment - Estimation of the thermal insulation and evaporative resistance of a clothing ensemble (ISO 9920:1995) |
|
DIN EN ISO 9921 |
Ergonomics - Assessment of speech communication (ISO 9921:2003) |
|
DIN EN ISO 9963-1 |
Determination of alkalinity of water - Determination of total and composite alkalinity (ISO 9963-1:1994) |
|
DIN EN ISO 9963-2 |
Determination of alkalinity of water - Determination of carbonate alkalinity (ISO 9963-2:1994) |
|
DIN IEC 60645-3 |
(DRAFT) Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration (IEC 29/559A/CD:2004) |
|
DIN IEC 60743/A1 |
(DRAFT) Live working - Terminology for tools, equipment and devices (IEC 78/666/CD:2006) |
|
DIN IEC 60855 |
(DRAFT) Live working - Insulating foam-filled tubes and solid rods (IEC 78/448/CD:2002) |
|
DIN IEC 61098 |
(DRAFT) Radiation protection - Installed personnel surface contamination monitoring assemblies (IEC 45B/281/CD:2000) |
|
DIN IEC 61300-2-36 |
(DRAFT) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-36: Tests - Flammability (fire hazard) (IEC 86B/1969/CD:2004) |
|
DIN ISO 10381-5 |
Soil quality - Sampling - Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination (ISO 10381-5:2005) |
|
DIN ISO 10381-6 |
Soil quality - Sampling - Part 6: Guidance on the collection, handling and storage of soil for the assessment of aerobic microbial processes in the laboratory (ISO 10381-6:1993) |
|
DIN ISO 10382 |
Soil quality - Determination of organochlorine pesticides and polychlorinated biphenyls - Gas-chromatographic method with electron capture detection (ISO 10382:2002) |
|
DIN ISO 10390 |
Soil quality - Determination of pH (ISO 10390:2005) |
|
DIN ISO 10473 |
Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method (ISO 10473:2000) |
|
DIN ISO 10566 |
Water quality - Determination of aluminium - Spectrometric method using pyrocatechol violet (ISO 10566:1994) |
|
DIN ISO 10694 |
Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis) (ISO 10694:1995) |
|
DIN ISO 11047 |
Soil quality - Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia extracts of soil - Flame and electrothermal atomic absorption spectrometric methods (ISO 11047:1998) |
|
DIN ISO 11074 |
(DRAFT) Soil quality - Vocabulary (ISO/FDIS 11074:2005) |
|
DIN ISO 11074-1 |
Soil quality - Vocabulary - Part 1: Terms and definitions relating to the protection and pollution of the soil (ISO 11074-1:1996) |
|
DIN ISO 11260 |
Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO 11260:1994 + Corr 1:1996) |
|
DIN ISO 11261 |
Soil quality - Determination of total nitrogen - Modified Kjeldahl method (ISO 11261:1995) |
|
DIN ISO 11263 |
Soil quality - Determination of phosphorus - Spectrometric determination of phosphorus soluble in sodium hydrogen carbonate solution (ISO 11263:1994) |
|
DIN ISO 11264 |
Soil quality - Determination of herbicides - Method using HPLC with UV-detection (ISO 11264:2005) |
|
DIN ISO 11266 |
Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions (ISO 11266:1994) |
|
DIN ISO 11267 |
Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil pollutants (ISO 11267:1999) |
|
DIN ISO 11268-1 |
Soil quality - Effects of pollutants on earthworms (Eisenia fetida) - Part 1: Determination of acute toxicity using artificial soil substrate (ISO 11268-1:1993) |
|
DIN ISO 11268-2 |
Soil quality - Effects of pollutants on earthworms (Eisenia fetida) - Part 2: Determination of effects on reproduction (ISO 11268-2:1998) |
|
DIN ISO 11268-3 |
Soil quality - Effects of pollutants on earthworms - Part 3: Guidance on the determination of effects in field situations (ISO 11268-3:1999) |
|
DIN ISO 11269-1 |
Soil quality - Determination of the effects of pollutants on soil flora - Part 1: Method for the measurement of inhibition of root growth (ISO 11269-1:1993) |
|
DIN ISO 11269-2 |
Soil quality - Determination of the effects of pollutants on soil flora - Part 2: Effects of chemicals on the emergence and growth of higher plants (ISO 11269-2:2005) |
|
DIN ISO 11464 |
Soil quality - Pretreatment of samples for physico-chemical analysis (ISO 11464:2006) |
|
DIN ISO 11466 |
Soil quality - Extraction of trace elements soluble in aqua regia (ISO 11466:1995) |
|
DIN ISO 13536 |
Soil quality - Determination of the potential cation exchange capacity and exchangeable cations using barium chloride solution buffered at pH = 8,1 (ISO 13536:1995) |
|
DIN ISO 13752 |
Air quality - Assessment of uncertainty of a measurement method under field conditions using a second method as reference (ISO 13752:1998) |
|
DIN ISO 13878 |
Soil quality - Determination of total nitrogen content by dry combustion ('elemental analysis') (ISO 13878:1998) |
|
DIN ISO 13964 |
Air quality - Determination of ozone in ambient air - Ultraviolet photometric method (ISO 13964:1998) |
|
DIN ISO 14015 |
Environmental management - Environmental assessment of sites and organizations (EASO) (ISO 14015:2001) |
|
DIN ISO 14025 |
(DRAFT) Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO/DIS 14025:2005) |
|
DIN ISO 14063 |
(DRAFT) Environmental management - Environmental communication - Guidelines and examples (ISO/DIS 14063:2004) |
|
DIN ISO 14154 |
Soil quality - Determination of some selected chlorophenols - Gas-chromatographic method with electron-capture detection (ISO 14154:2005) |
|
DIN ISO 14238 |
Soil quality - Biological methods - Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes (ISO 14238:1997) |
|
DIN ISO 14239 |
Soil quality - Laboratory incubation systems for measuring the mineralization of organic chemicals in soil under aerobic conditions (ISO 14239:1997) |
|
DIN ISO 14240-1 |
Determination of soil microbial biomass - Part 1: Substrate-induced respiration method (ISO 14240-1:1997) |
|
DIN ISO 14240-2 |
Determination of soil microbial biomass - Part 2: Fumigation-extraction method (ISO 14240-2:1997) |
|
DIN ISO 14255 |
Soil quality - Determination of nitrate nitrogen, ammonium nitrogen and total soluble nitrogen in air-dry soils using calcium chloride solution as extractant (ISO 14255:1998) |
|
DIN ISO 14256-2 |
Soil quality - Determination of nitrate, nitrite and ammonium in field-moist soils by extraction with potassium chloride solution - Part 2: Automated method with segmented flow analysis (ISO 14256-2:2005) |
|
DIN ISO 14835-1 |
Mechanical vibration and shock - Cold provocation tests for the assessment of peripheral vascular function - Part 1: Measurement and evaluation of finger skin temperature (ISO 14835-1:2005) |
|
DIN ISO 15089 |
Water quality - Guidelines for selective immunoassays for the determination of plant treatment and pesticide agents (ISO 15089:2000) |
|
DIN ISO 15178 |
Soil quality - Determination of total sulfur by dry combustion (ISO 15178:2000) |
|
DIN ISO 15685 |
Soil quality - Determination of potential nitrification and inhibition of nitrification - Rapid test by ammonium oxidation (ISO 15685:2004) |
|
DIN ISO 15705 |
Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed tube method (ISO 15705:2002) |
|
DIN ISO 15709 |
Soil quality - Soil water and the unsaturated zone - Definitions, symbols and theory (ISO 15709:2002) |
|
DIN ISO 15767 |
Workplace atmospheres - Controlling and characterizing errors in weighing collected aerosols (ISO 15767:2003) |
|
DIN ISO 16000-3 |
Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds; Active sampling method (ISO 16000-3:2001) |
|
DIN ISO 16000-4 |
Indoor air - Part 4: Determination of formaldehyde - Diffusive sampling method (ISO 16000-4:2004) |
|
DIN ISO 16000-6 |
Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA® sorbent, thermal desorption and gas chromatography using MS/FID (ISO 16000-6:2004) |
|
DIN ISO 16072 |
Soil quality - Laboratory methods for determination of microbial soil respiration (ISO 16072:2002) |
|
DIN ISO 16133 |
Soil quality - Guidance on the establishment and maintenance of monitoring programmes (ISO 16133:2004) |
|
DIN ISO 16362 |
Ambient air - Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography (ISO 16362:2005) |
|
DIN ISO 16387 |
Soil quality - Effects of pollutants on Enchytraeidae (Enchytraeus sp.) - Determination of effects on reproduction and survival (ISO 16387:2004) |
|
DIN ISO 16586 |
Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method (ISO 16586:2003) |
|
DIN ISO 16622 |
Meteorology - Sonic anemometers/thermometers - Acceptance test methods for mean wind measurements (ISO 16622:2002) |
|
DIN ISO 16703 |
Soil quality - Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography (ISO 16703:2004) |
|
DIN ISO 16772 |
Soil quality - Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry (ISO 16772:2004) |
|
DIN ISO 16832 |
(DRAFT) Acoustics - Loudness scaling by means of categories (Categorial loudness scaling) (ISO/CD 16832:2003) |
|
DIN ISO 17155 |
Soil quality - Determination of abundance and activity of the soil microflora using respiration curves (ISO 17155:2002) |
|
DIN ISO 17380 |
Soil quality - Determination of total cyanide and easily released cyanide - Continuous-flow analysis method (ISO 17380:2004) |
|
DIN ISO 18287 |
Soil quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Gas chromatographic method with mass spectrometric detection (GC-MS) (ISO 18287:2006) |
|
DIN ISO 19258 |
Soil quality - Guidance on the determination of background values (ISO 19258:2005) |
|
DIN ISO 20279 |
Soil quality - Extraction of thallium and determination by electrothermal atomic absorption spectrometry (ISO 20279:2005) |
|
DIN ISO 22030 |
Soil quality - Biological methods - Chronic toxicity in higher plants (ISO 22030:2005) |
|
DIN ISO 22155 |
Soil quality - Gas chromatographic quantitative determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method (ISO 22155:2005) |
|
DIN ISO 22892 |
Soil quality - Guidelines for the identification of target compounds by gas chromatography and mass spectrometry (ISO 22892:2006) |
|
DIN ISO 23611-1 |
Soil quality - Sampling of soil invertebrates - Part 1: Hand-sorting and formalin extraction of earthworms (ISO 23611-1:2006) |
|
DIN ISO 23611-2 |
Soil quality - Sampling of soil invertebrates - Part 2: Sampling and extraction of micro-arthropods (Collembola and Acarina) (ISO 23611-2:2006) |
|
DIN ISO 23753-1 |
Soil quality - Determination of dehydrogenase activity in soils - Part 1: Method using triphenyltetrazolium chloride (TTC) (ISO 23753-1:2005) |
|
DIN ISO 23753-2 |
Soil quality - Determination of dehydrogenase activity in soils - Part 2: Method using iodotetrazolium chloride (INT) (ISO 23753-2:2005) |
|
DIN ISO 23753-2 |
Soil quality - Determination of dehydrogenase activity in soils - Part 2: Method using iodotetrazolium chloride (INT) (ISO 23753-2:2005) |
|
DIN ISO 389-9 |
(DRAFT) Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO/CD 389-9:2005) |
|
DIN ISO 6826 |
Reciprocating internal combustion engines - Fire protection (ISO 6826:1997) |
|
DIN ISO 7708 |
Air quality - Particle size fraction definitions for health-related sampling (ISO 7708:1995) |
|
DIN ISO 8466-2 |
Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second-order calibration functions (ISO 8466-2:2001) |
|
DIN ISO 8756 |
Air quality - Handling of temperature, pressure and humidity data (ISO 8756:1994) |
|
DIN V 30745 |
Radio-frequency identification of waste containers by transponder technology; text German and English |
|
DIN V 38407-11 |
German standard methods for the examination of water, waste water and sludge - Substance group analysis (group F) - Determination of selected organic pesticides by automated multiple development (AMD) (F 11) |
|
DIN-Fachbericht 107 |
Environmental management - Life cycle assessment - Examples of application of ISO 14041 to goal and scope definition and inventory analysis; German and english version ISO/TR 14049:2000 |
|
DIN-Fachbericht 108 |
Guide for the inclusion of environmental aspects in product standardization and development; German and English Version |
|
DIN-Fachbericht 118 |
Characterisation of sludges - Sludge management in relation to use or disposal; CEN Report CR 13714 |
|
DIN-Fachbericht 123 |
Characterisation of sludges - Recommendations to preserve and extend sludge utilisation and disposal routes; CEN Report CR 13846 |
|
DIN-Fachbericht 140 |
Design of silos for dust explosions |
|
DIN-Fachbericht 54 |
Environmental aspects - Inclusion in electrotechnical product standards; German and English version |
|
DIN-Fachbericht 59 |
Guide for the inclusion of environmental aspects in product standards |
|
DIN-Fachbericht CEN ISO/TR 11610 |
Protective clothing - Vocabulary (ISO/TR 11610:2004) |
|
DIN-Fachbericht CEN/CR 13097 |
Characterization of sludges - Good practice for sludge utilisation in agriculture (CEN-Report 13097:2001) |
|
DIN-Fachbericht CEN/TR 12566-2 |
Small wastewater treatment systems for up to 50 PT - Part 2: Soil infiltration systems; German version CEN/TR 12566-2:2005 |
|
DIN-Fachbericht CEN/TR 13767 |
Characterization of sludges - Good practice for sludges incineration with and without grease and screenings |
|
DIN-Fachbericht CEN/TR 13768 |
Characterization of sludges - Good practice for combined incineration of sludges and household wastes |
|
DIN-Fachbericht CEN/TR 15119 |
Durability of wood and wood-based products - Estimation of emissions from preservative treated wood to the environment - Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground), and wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method; English version CEN/TR 15119:2005 |
|
DIN-Fachbericht CEN/TR 15126 |
Characterization of sludges - Good practice for landfilling of sludges and sludge treatment residues |
|
DIN-Fachbericht CEN/TR 15473 |
Characterization of sludges - Good practice for sludge drying |
|
DIN-Fachbericht ISO/TR 14062 |
Environmental management - Integrating environmental aspects into product design and development; German and english Version ISO/TR 14062:2002 |