|
DIN EN 10204 |
Metallic products - Types of inspection documents |
|
DIN EN ISO 9001 |
Quality management systems - Requirements (ISO 9001:2000); Trilingual version EN ISO 9001:2000 |
|
DIN EN ISO/IEC 17025 |
General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005); German and English version EN ISO/IEC 17025:2005 |
|
DIN EN ISO 1302 |
Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002) |
|
DIN ISO 10007 |
Quality management systems - Guidelines for configuration management (ISO 10007:2003) |
|
DIN ISO 13715 |
Technical drawings - Edges of undefined shape - Vocabulary and indication on drawings (ISO 13715:2000) |
|
DIN ISO 1219-1 |
(DRAFT) Fluid power systems and components - Graphic symbols and circuit diagrams - Part 1: Graphic symbols for conventional use and data processing applications (ISO/DIS 1219-1:2004) |
|
DIN EN 22553 |
Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992); German version EN 22553:1994 |
|
DIN EN 934-2 |
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures; Definitions, requirements, conformity, marking and labelling; English version of DIN EN 934-2 |
|
DIN 3966-2 |
Information on Gear Teeth in Drawings; Information on Straight Bevel Gear Teeth |
|
DIN EN 934-3 |
Admixtures for concrete, mortar and grout - Part 3: Admixtures for mortar - Definitions, requirements, conformity, marking and labelling |
|
DIN EN ISO 10012 |
Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003); Trilingual version EN ISO 10012:2003 |
|
DIN EN ISO 9004 |
Quality management systems - Guidelines for performance improvements (ISO 9004:2000); Trilingual version EN ISO 9004:2000 |
|
DIN 2425-4 |
Plans for Public Utilities, Water Resources and Long-distance Lines; Sewer Network Drawings of Public Sewerage Systems |
|
DIN 2425-5 |
Plans for public supplies, water engineering and long-distance pipelines; maps and plans for water engineering |
|
DIN 2425-6 |
Plans for public utilities, water resources management and for long-distance pipelines; Maps and plans for water engineering, flood and coastal protection |
|
DIN 32520-1 |
Graphical symbols for welding; basic graphical symbols and principles |
|
DIN 3966-1 |
Information on Gear Teeth in Drawings; Information on Involute Teeth for Cylindrical Gears |
|
DIN 3971 |
Definitions and Parameters for Bevel Gears and Bevel Gear Pairs |
|
DIN 3998-4 |
Denominations on Gears and Gear Pairs; Worm Gear Pairs |
|
DIN 863-1 |
Micrometers - Standard design external micrometers - Concepts, requirements and testing |
|
DIN 863-4 |
Micrometers - Internal micrometers - Concepts, requirements and testing |
|
DIN EN 10020 |
Definition and classification of grades of steel; English version ofDIN EN 10020 |
|
DIN EN 60027-4 |
(DRAFT) Letter symbols to be used in electrical technology - Part 4: Rotating electric machines (IEC 25/330/FDIS:2006); German version prEN 60027-4:2006 |
|
DIN EN 9102 |
(DRAFT) Aerospace series - Quality systems - First article inspection |
|
DIN EN 934-2/A1 |
Admixtures for concrete, mortar and grout - Concrete admixtures - Part 2: Definitions, requirements, conformity, marking and labelling |
|
DIN EN ISO 4287 |
GPS - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997) |
|
DIN EN ISO/IEC 17021 |
Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC 17021:2006); German and English version EN ISO/IEC 17021:2006 |
|
DIN IEC 60050-411/A1 |
(DRAFT) International Electrotechnical Vocabulary - Part 411: Rotating machinery (IEC 1/1988/CDV:2006) |
|
DIN ISO 10001 |
(DRAFT) Quality management - Customer satisfaction - Guidelines for codes of conduct for organizations (ISO/DIS 10001:2006); Text in German and English |
|
DIN ISO 5053 |
Powered industrial trucks - Terminology; identical with ISO 5053:1987 |
|
DIN ISO 5593 |
Rolling bearings - Vocabulary (ISO 5593:1997) |
|
DIN 1080-3 |
Terms, Symbols and Units Used in Civil Engineering; Concrete Construction and Reinforced Concrete Construction, Prestressed Concrete Construction, Masonry Construction |
|
DIN 1080-4 |
Terms, Symbols and Units Used in Civil Engineering; Concrete Construction, Composite Steel Construction and Steel Girders in Concrete |
|
DIN 1080-6 |
Terms, Symbols and Units used in Civil Engineering; Soil Mechanics and Foundation Engineering |
|
DIN 15001-1 |
Cranes; Vocabulary, classification according to type |
|
DIN 15001-2 |
Cranes; Vocabulary, classification according to application |
|
DIN 17007-4 |
Material Numbers; System of the Principal Groups 2 and 3: Non-ferrous Metals |
|
DIN 18007 |
Demolition work - Terminology, techniques and applications |
|
DIN 2425-3 |
Plans for Public Utilities, Water Resources and Long-distance Lines; Plans for Long-distance Pipelines, Technical Regulation of the DVGW (German Gas and Water Engineers Association) |
|
DIN 32520-3 |
Graphical symbols for welding; graphical symbols for use on arc welding equipment |
|
DIN 3998-3 |
Denominations on Gears and Gear Pairs; Bevel and Hypoid Gears and Gear Pairs |
|
DIN 50010-2 |
Climates and their technical application; climatological terms and definitions; physical terms and definitions |
|
DIN 50011-11 |
Climates and their technical application; controlled-atmosphere test installations; general terminology and requirements |
|
DIN 65118-1 |
Aerospace; welded metallic component parts; indications on drawings |
|
DIN 7708-1 |
Plastic Moulding Materials; Plastic Products; Concepts |
|
DIN 81249-1 |
Corrosion of metals in sea water and sea atmosphere - Part 1: Definitions, basic information |
|
DIN 824 |
Technical drawings; Folding to filing size |
|
DIN 85005 Beiblatt 1 |
Ships and marine technology - Graphical symbols for technical documentation - Index |
|
DIN 918 |
Fasteners; Terminology; Spelling of terms; Abbreviations |
|
DIN EN 764-3 |
Pressure equipment - Part 3: Definition of parties involved |
|
DIN EN 9100 |
Aerospace series - Quality management systems - Requirements (based on ISO 9001:2000) and quality system; Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994); German and English version EN 9100:2003 |
|
DIN EN 934-3 Berichtigung 1 |
Admixtures for concrete, mortar and grout - Part 3: Admixtures for mortar - Definitions, requirements, conformity, marking and labelling; Corrigenda to DIN EN 934-3:2004-03 |
|
DIN EN ISO 5458 |
GPS - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998) |
|
DIN EN ISO 9000 |
Quality management systems - Fundamentals and vocabulary (ISO 9000:2005); Trilingual version EN ISO 9000:2005 |
|
DIN EN ISO 9241-12 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information (ISO 9241-12:1998); English version of DIN EN ISO 9241-12 |
|
DIN EN ISO 9241-14 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues (ISO 9241-14:1997); English version of DIN EN ISO 9241-14 |
|
DIN EN ISO/IEC 17000 |
Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2004); Trilingual version EN ISO/IEC 17000:2004 |
|
DIN EN ISO/IEC 17025 Berichtigung 1 |
General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005); German and English version EN ISO/IEC 17025:2005, Corrigenda to DIN EN ISO/IEC 17025:2005-08; German and English version EN ISO/IEC 17025:2005/AC:2006 |
|
DIN EN ISO/IEC 17025 Berichtigung 2 |
General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005); German and English version EN ISO/IEC 17025:2005, Corrigenda to DIN EN ISO/IEC 17025:2005-08; German and English version EN ISO/IEC 17025:2005/AC:2006 |
|
DIN IEC 60300-3-4 |
(DRAFT) Dependability Management - Part 3: Application Guide - Section 4: Guide to the Specification of Dependability Requirements (IEC 56/1039/CD:2005) |
|
DIN ISO 10303-225 |
(DRAFT) Industrial automation systems and integration - Product data representation and exchange - Part 225: Application protocol: Building elements using explicit shape representation (ISO 10303-225:1999) |
|
DIN ISO 3864-3 |
Graphical symbols - Safety colours and safety signs - Part 3: Design principles for graphical symbols for use in safety signs (ISO 3864-3:2006) |
|
DIN ISO 3951-1 |
(DRAFT) Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2005; text in German, English) |
|
DIN ISO 9045 |
Industrial screens and screening - Vocabulary (ISO 9045:1990) |
|
DIN 1080-1 |
Terms, Symbols and Units Used in Civil Engineering; Principles |
|
DIN 1080-2 |
Terms, Symbols and Units Used in Civil Engineering; Statics |
|
DIN 1080-5 |
Terms, Symbols and Units Used in Civil Engineering; Timber Construction |
|
DIN 1080-7 |
Terms, Symbols and Units used in Civil Engineering; Water Engineering |
|
DIN 1301-1 |
Units - Part 1: Names and symbols |
|
DIN 1301-2 |
Units; Submultiples and Multiples for General Use |
|
DIN 1301-3 |
Units; Conversions of Units No Longer to be Used |
|
DIN 1304-1 |
Letter symbols for physical quantities - Symbols for general use |
|
DIN 1304-2 |
Letter symbols for physical quantities - Symbols for use in meteorology and geophysics |
|
DIN 1304-3 |
Letter symbols for physical quantities - Symbols for use in electric power engineering |
|
DIN 1304-5 |
Letter symbols for physical quantities - Symbols for use in fluid mechanics |
|
DIN 1304-6 |
Letter symbols for physical quantities - Symbols for use in electrical communications engineering |
|
DIN 1304-7 |
Letter symbols for physical quantities - Symbols to be used for electrical machines |
|
DIN 1310 |
Composition of (gaseous, liquid and solid) mixtures; concepts, symbols |
|
DIN 1311 Beiblatt 2 |
Vibration and shock - Dictionary |
|
DIN 1314 |
Pressure; Basic Definitions, Units |
|
DIN 1319-1 |
Basic concepts in metrology - General concepts |
|
DIN 13902-1 |
Dentistry - Terminology of oral implantology - Part 1: Endosseous dental implant systems |
|
DIN 19226 Beiblatt 1 |
Control technology - Index |
|
DIN 19653 |
Symbols for irrigation system equipment |
|
DIN 199-3 |
Terms in Drawings and Parts Lists; Processing of Parts Lists, Terms in Code Systems |
|
DIN 199-4 |
Terminology associated with technical drawings and parts lists; Amendments |
|
DIN 199-5 |
Terminology associated with technical drawings and parts lists; Parts lists processing, evaluation of parts lists |
|
DIN 2257-1 |
Terminology used in dimensional metrology; Units, activities, checking instruments; Metrological concepts |
|
DIN 2277 |
Circular Levels; Terms, Construction |
|
DIN 24080 |
Earth-moving Machinery; Hydraulic Excavators Cable-operated, Excavators; Terms |
|
DIN 24271-1 |
Centralized lubrication systems; Terminology, Classification |
|
DIN 2429-1 |
Symbolic representation of pipework components for use on engineering drawings; basic requirements |
|
DIN 2429-2 |
Symbolic representation of pipework components on engineering drawings; functional representation |
|
DIN 2429-2 Beiblatt 1 |
Symbolic representation of pipework components on technical drawings; functional representation; examples for the representation of open or shut-off flow |
|
DIN 2481 |
Thermal Power Plants; Graphical Symbols |
|
DIN 25002-3 |
Railway applications - Designation systematic for rail vehicles - Part 3: Classification of documents |
|
DIN 25003 |
Railway applications - Classification of rail vehicles - Survey, terminology, definitions |
|
DIN 29505 |
Aerospace; components of fibre reinforced plastics; indications in drawings and parts lists |
|
DIN 30642 |
Signs, plates and labels - Terms and definitions |
|
DIN 32541 |
Management of machines and similar technical equipment; Terminology associated with activities |
|
DIN 32736 |
Facility management - Terminology and scope of services |
|
DIN 3320-1 |
Safety valves; safety shut-off valves; definitions, sizing, marking |
|
DIN 3998 Beiblatt 1 |
Denominations on Gears and Gear Pairs; Alphabetical Index of Equivalent Terms |
|
DIN 3998-1 |
Denominations on Gears and Gear Pairs; General Definitions |
|
DIN 3998-2 |
Denominations on Gears and Gear Pairs; Cylindrical Gears and Gear Pairs |
|
DIN 406-10 |
Engineering drawing practice; dimensioning; concepts and general principles |
|
DIN 406-12 |
Engineering drawing practice; dimensioning; tolerancing of linear and angular dimensions (modified version of ISO 406:1987) |
|
DIN 4340 |
Gas Turbines; Definitions, Designations |
|
DIN 461 |
Graphical Representation in Systems of Coordinates |
|
DIN 4760 |
Form deviations; Concepts; Classification system |
|
DIN 4890 |
Inch - Millimetre; Fundamentals for Conversion |
|
DIN 4892 |
Inch - Millimetre; Conversion Tables |
|
DIN 50010-1 |
Climates and Their Technical Application; Climatic Concepts; General Climatic Concepts |
|
DIN 50100 |
Testing of Materials; Continuous Vibration Test; Definitions, Symbols, Procedure, Evaluation |
|
DIN 52130 |
Bitumen roofing felt - Requirements and testing |
|
DIN 52131 |
Torch-on bitumen felt - Requirements and testing |
|
DIN 52133 |
Torch-on polymeric bitumen felt - Requirements and testing |
|
DIN 52175 |
Wood preservation; Concept, Principles |
|
DIN 53804-2 |
Stastistical interpretation of data; countable (discrete) characteristics |
|
DIN 53804-3 |
Statistical interpretation; Ordinal characteristics |
|
DIN 53804-4 |
Statistical interpretation of data; attribute characteristics |
|
DIN 5499 |
Gross and Net Calorific Values; Terms |
|
DIN 55350-14 |
Quality assurance and statistical terminology; concepts relating to sampling |
|
DIN 55350-21 |
Quality assurance and statistical terminology; statistical terminology; random variables and probability distributions |
|
DIN 55350-22 |
Quality assurance and statistical terminology; statistical terminology; special probability distributions |
|
DIN 55350-23 |
Quality assurance and statistical terminology; statistical terminology; descriptive statistics |
|
DIN 55350-24 |
Quality assurance and statistical terminology; statistical terminology; inferential statistics |
|
DIN 58940-1 |
Medical microbiology - Susceptibility testing of pathogens to antimicrobial agents - Part 1: Terminology |
|
DIN 58967-10 |
Serodiagnosis of infectious diseases and diseases of the immune system; part 10: concepts, general requirements |
|
DIN 58967-30 |
Diagnostics of infectious diseases and diseases of the immune systems in serological and molecularbiology - Part 30: ELISA (Enzyme-Linked-Immuno-Sorbent-Assay); terms, general method-specific requirements |
|
DIN 58967-40 |
Serodiagnosis of infectious diseases and diseases of the immune system; immunoblot (IB); part 40: terms, general method-specific requirements |
|
DIN 6300 |
Jigs and Fixtures for Form-modifying Production Processes; Denominations and their Abbreviations |
|
DIN 66034 |
Kilopond (kg f) - Newton, Newton - Kilopond (kg f); Conversion Tables |
|
DIN 66036 |
Metric Horsepower - Kilowatt, Kilowatt - Metric Horsepower; Conversion Tables |
|
DIN 66037 |
Kilopond (kg f)/Square Centimetre - Bar, Bar - Kilopond (kg f)/Square Centimetre; Conversion Tables |
|
DIN 66054 |
Comparative testing; Principles regarding procedure |
|
DIN 66313 |
Information technology; information resource dictionary system (IRDS) framework; identical with ISO/IEC 10027:1990 |
|
DIN 6735 |
Paper, board and pulps - Survey of terms and definitions |
|
DIN 6774-4 |
Technical drawings; Rules for preparation; Drawn masters for printing purposes |
|
DIN 80002-1 |
Ships and marine technology - General arrangement plans for ships - Part 1: Requirements, layout |
|
DIN 80002-1 Beiblatt 1 |
Ships and marine technology - General arrangement plans for ships - Example bulkcarrier |
|
DIN 80002-1 Beiblatt 2 |
Ships and marine technology - General arrangement plans for ships - Example containership |
|
DIN 80002-1 Beiblatt 3 |
Ships and marine technology - General arrangement plans for ships - Example multipurpose ship |
|
DIN 80002-1 Beiblatt 4 |
Ships and marine technology - General arrangement plans for ships - Example Ro/Ro ship |
|
DIN 80002-1 Beiblatt 5 |
Ships and marine technology - General arrangement plans for ships - Example passenger vessel (ferries accordingly) |
|
DIN 80002-1 Beiblatt 6 |
Ships and marine technology - General arrangement plans for ships - Ships of the Federal German Navy, example frigate |
|
DIN 80002-1 Beiblatt 7 |
Ships and marine technology - General arrangement plans for ships - Example submersibles |
|
DIN 80002-1 Beiblatt 8 |
Ships and marine technology - General arrangement plans for ships - Example inland vessels |
|
DIN 80004 |
Shipbuilding related terms and definitions and abbreviations in German and English |
|
DIN 81208-1 |
Manoeuvring of ships - Part 1: General concepts, quantities and test/trial conditions |
|
DIN 81208-10 |
Manoeuvring of ships - Part 10: Reverse spiral test/trial (according to Bech) |
|
DIN 81208-11 |
Manoeuvring of ships - Part 11: Direct spiral test/trial (according to Dieudonné) |
|
DIN 81208-12 |
Manoeuvring of ships - Part 12: Stopping trial |
|
DIN 81208-13 |
Manoeuvring of ships - Part 13: Traversing test/trial |
|
DIN 81208-15 |
Manoeuvring of ships - Part 15: Meander trial |
|
DIN 81208-16 |
Manoeuvring of ships - Part 16: Vertical overshoot trial |
|
DIN 81208-18 |
Manoeuvring of ships - Part 18: Critical speed trial |
|
DIN 81208-2 |
Manoeuvring of ships - Part 2: Coasting stop trial |
|
DIN 81208-23 |
Manoeuvring of ships - Part 23: Turning test/trial with thrusters |
|
DIN 81208-24 |
Manoeuvring of ships - Part 24: Course change test/trial |
|
DIN 81208-25 |
Manoeuvring of ships - Part 25: Parallel track test/trial |
|
DIN 81208-26 |
Manoeuvring of ships - Part 26: Person over board trial |
|
DIN 81208-3 |
Manoeuvring of ships - Part 3: Pull-out trial |
|
DIN 81208-4 |
Manoeuvring of ships - Part 4: Acceleration trial |
|
DIN 81208-5 |
Manoeuvring of ships - Part 5: Turning circle test/trial |
|
DIN 81208-6 |
Manoeuvring of ships - Part 6: Accelerating turn test/trial |
|
DIN 81208-7 |
Manoeuvring of ships - Part 7: Astern trial |
|
DIN 81208-8 |
Manoeuvring of ships - Part 8: Zig-zag test/trial (Z-test/trial ) |
|
DIN 81208-9 |
Manoeuvring of ships - Part 9: Sine test/trial |
|
DIN 81209-1 |
Geometry and stability of ships - Symbols, terms, definitions - Part 1: General, monohull surface ships |
|
DIN 81209-2 |
Geometry and stability of ships - Symbols, terms, definitions - Part 2: Submarines |
|
DIN 81209-3 |
Geometry and stability of ships - Symbols, terms, definitions - Part 3: Multihull surface ships |
|
DIN 81209-6 |
Geometry and stability of ships - Symbols, terms, definitions - Part 6: Sailing ships |
|
DIN 81834 |
Components for anchoring equipment - Terms and definitions |
|
DIN 820-1 |
Standards work - Principles |
|
DIN 820-2 |
Standardization - Part 2: Presentation of documents (ISO/IEC-Directives - Part 2, modified); Trilingual version CEN/CENELEC-Internal Regulations - Part 3: Rules for the structure and drafting of CEN/CENELEC publications |
|
DIN 820-4 |
Standards work - Working procedure |
|
DIN 8236-1 |
Chronometric Terms; Indication, Rate |
|
DIN 8236-2 |
Chronometric Terms; Frequency, Period |
|
DIN 8236-3 |
Chronometric Terms; Coefficients of the Rate |
|
DIN 825 |
Nameplate, signs and labels - Dimensions |
|
DIN 85005-1 |
Ships and marine technology - Graphical symbols for technical documentation - Part 1: General instructions |
|
DIN 85005-10 |
Ships and marine technology - Graphical symbols for technical documentation - Part 10: Sensors and operating indicators |
|
DIN 85005-11 |
Ships and marine technology - Graphical symbols for technical documentation - Part 11: Turbines |
|
DIN 85005-12 |
Ships and marine technology - Graphical symbols for technical documentation - Part 12: Compressors |
|
DIN 85005-14 |
Ships and marine technology - Graphical symbols for technical documentation - Part 14: Pumps, filters, separators, dryers |
|
DIN 85005-15 |
Ships and marine technology - Graphical symbols for technical documentation - Part 15: Drains |
|
DIN 85005-16 |
Ships and marine technology - Graphical symbols for technical documentation - Part 16: Ventilation plants |
|
DIN 85005-17 |
Ships and marine technology - Graphical symbols for technical documentation - Part 17: Doors, hatches, openings, windows, stairs, elevators |
|
DIN 85005-18 |
Ships and marine technology - Graphical symbols for technical documentation - Part 18: Sanitary installations |
|
DIN 85005-2 |
Ships and marine technology - Graphical symbols for technical documentation - Part 2: Piping and hose assemblies, pipe and hose-joints, penetrations |
|
DIN 85005-23 |
Ships and marine technology - Graphical symbols for technical documentation - Part 23: Isolations |
|
DIN 85005-24 |
Ships and marine technology - Graphical symbols for technical documentation - Part 24: Components for measures against vibration and sound |
|
DIN 85005-27 |
Ships and marine technology - Graphical symbols for technical documentation - Part 27: Mechanical remote controls |
|
DIN 85005-3 |
Ships and marine technology - Graphical symbols for technical documentation - Part 3: Shut-off, control and regulating parts |
|
DIN 85005-30 |
Ships and marine technology - Graphical symbols for technical documentation - Part 30: Electrical energy production, energy distribution |
|
DIN 85005-31 |
Ships and marine technology - Graphical symbols for technical documentation - Part 31: Electrical installation |
|
DIN 85005-32 |
Ships and marine technology - Graphical symbols for technical documentation - Part 32: Call systems and alarm systems |
|
DIN 85005-33 |
Ships and marine technology - Graphical symbols for technical documentation - Part 33: Economic equipment |
|
DIN 85005-34 |
Ships and marine technology - Graphical symbols for technical documentation - Part 34: Control indicators for ships propulsion plants |
|
DIN 85005-35 |
Ships and marine technology - Graphical symbols for technical documentation - Part 35: Navigational equipment |
|
DIN 85005-36 |
Ships and marine technology - Graphical symbols for technical documentation - Part 36: Radio equipment, teleprinter and communication systems |
|
DIN 85005-37 |
Ships and marine technology - Graphical symbols for technical documentation - Part 37: Lighting fittings |
|
DIN 85005-38 |
Ships and marine technology - Graphical symbols for technical documentation - Part 38: Devices of electrical installations in special systems |
|
DIN 85005-4 |
Ships and marine technology - Graphical symbols for technical documentation - Part 4: Sounding pipes, air-pipes and filling pipes |
|
DIN 85005-5 |
Ships and marine technology - Graphical symbols for technical documentation - Part 5: Steam generator, heat exchanger, container |
|
DIN 85005-6 |
Ships and marine technology - Graphical symbols for technical documentation - Part 6: Freshwater distilling unit |
|
DIN 85005-7 |
Ships and marine technology - Graphical symbols for technical documentation - Part 7: Pressure tanks |
|
DIN 85005-8 |
Ships and marine technology - Graphical symbols for technical documentation - Part 8: Power transmission plant and steering gear components |
|
DIN 85005-9 |
Ships and marine technology - Graphical symbols for technical documentation - Part 9: Suction- and discharge sockets |
|
DIN 8528-1 |
Weldability; Metallic Materials, Definitions |
|
DIN 86080 |
Ships and marine technology - System Co-ordination plans in shipbuilding |
|
DIN 863-2 |
Micrometers - Fixed micrometers and depth micrometers - Concepts, requirements and testing |
|
DIN 868 |
General Definitions and Specification Factors for Gears, Gear Pairs and Gear Trains |
|
DIN 9869-1 |
Terms for Tools for the Manufacture of Thin, Primarily Surface-intensive Workpieces; Classification |
|
DIN 9869-2 |
Terms for Pressworking Tools; Cutting Tools |
|
DIN 9870-1 |
Terms for Stamping Practice; Production Processes and Tools; General Terms and Alphabetical Survey |
|
DIN 9870-2 |
Terms for Stamping Practice; Production Processes and Tools for Severing |
|
DIN 9870-3 |
Terms for Stamping Practice; Production Processes and Tools for Forming by Bending |
|
DIN EN 1005-1 |
Safety of machinery - Human physical performance - Part 1: Terms and definitions; English version of DIN EN 1005-1 |
|
DIN EN 10168 |
Steel products - Inspection documents - List of information and description |
|
DIN EN 12052 |
Health informatics - Digital imaging - Communication, workflow and data management; English version EN 12052:2004 |
|
DIN EN 12597 |
(DRAFT) Bitumen and bituminous binders - Terminology; Trilingual version prEN12597:2006 |
|
DIN EN 12597 |
Bitumen and bituminous binders - Terminology; Trilingual version EN 12597:2000 |
|
DIN EN 12701 |
Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials; English version of DIN EN 12701 |
|
DIN EN 132 |
Respiratory protective devices - Definitions of terms and pictograms |
|
DIN EN 13263-1 |
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria |
|
DIN EN 1330-9 |
Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing; Trilingual version EN 1330-9:2000 |
|
DIN EN 13321-2 |
Open data communication in building automation, controls and building management - Home and building electronic systems - Part 2: KNXnet/IP Communication; English version EN 13321-2:2006 |
|
DIN EN 1333 |
Flanges and their joints - Pipework components - Definition and selection of PN |
|
DIN EN 13606-3 |
(DRAFT) Health informatics - Electronic health record communication - Part 3: Reference archetypes and term lists; English version prEN 13606-3:2006 |
|
DIN EN 14487-1 |
Sprayed concrete - Part 1: Definitions, specifications and conformity |
|
DIN EN 14943 |
Transport services - Logistics - Glossary of terms |
|
DIN EN 1504-1 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions |
|
DIN EN 1504-10 Berichtigung 1 |
Products and systems for the protection and repair of concrete structures - Definitions, Requirements, Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works Corrigendum 1 to English version of DIN EN 1504-10:2004-05 |
|
DIN EN 1504-2 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
|
DIN EN 1504-3 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
|
DIN EN 1504-6 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar |
|
DIN EN 1504-7 |
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
|
DIN EN 15221-1 |
Facility Management - Part 1: Terms and definitions |
|
DIN EN 15380-2 |
Railway applications - Designation system for railway vehicles - Part 2: Product groups |
|
DIN EN 1556 |
Bar coding - Terminology |
|
DIN EN 1748-2-1 |
Glass in building - Special basic products - Glass ceramics - Part 2-1: Definitions and general physical and mechanical properties |
|
DIN EN 607 |
Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
|
DIN EN 61158-600 |
(DRAFT) Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 600: Application Layer protocol specification (IEC 65C/436/CDV:2006); German version prEN 61158-600:2006, text in English, only on CD-ROM |
|
DIN EN 61360-4 |
Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes (IEC 61360-4:2005); German version EN 61360-4:2005, text in English |
|
DIN EN 61970-501 |
Energy management system application program interface (EMS-API) - Part 501: Common Information Model Resource Description Framework (CIM RDF) schema (IEC 61970-501:2006); German version EN 61970-501:2006, text in English |
|
DIN EN 736-1 |
Valves - Terminology - Types of valves |
|
DIN EN 736-2 |
Valves - Terminology - Part 2: Definition of components of valves |
|
DIN EN 736-3 |
Valves - Terminology - Part 3: Definition of terms (includes Amendment A1:2001); English version of DIN EN 736-3:1999 + A1:2001 |
|
DIN EN 9104 |
(DRAFT) Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Registrations Programs; German and English version EN 9104:2006 |
|
DIN EN 9120 |
(DRAFT) Aerospace series - Quality management systems - Requirements for stockist distributors (based on ISO 9001:2000); German and English version EN 9120:2005 |
|
DIN EN 9121 |
Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000); German and English version EN 9121:2005 |
|
DIN EN 9130 |
(DRAFT) Aerospace series - Quality systems - Record retention |
|
DIN EN 9131 |
(DRAFT) Aerospace series - Quality management systems - Nonconformance documentation |
|
DIN EN 980 |
Graphical symbols for use in the labelling of medical devices |
|
DIN EN ISO 12100-2 |
Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003) |
|
DIN EN ISO 12718 |
(DRAFT) Non-destructive testing - Terminology - Terms used in eddy current testing (ISO/DIS 12718:2006); Trilingual version prEN ISO 12718:2006 |
|
DIN EN ISO 128-20 |
Technical drawings - General principles of presentation - Part 20: Basic conventions for lines (ISO 128-20:1996) |
|
DIN EN ISO 128-21 |
Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD-systems (ISO 128-21:1997) |
|
DIN EN ISO 14692-1 |
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2002); English version EN ISO 14692-1:2002 |
|
DIN EN ISO 17659 |
Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002); Trilingual version EN ISO 17659:2004 |
|
DIN EN ISO 19011 |
Guidelines for quality and/or environmental management systems auditing (ISO 19011:2002); German version EN ISO 19011:2002 |
|
DIN EN ISO 3098-5 |
Technical product documentation - Lettering - Part 5: CAD lettering of the Latin alphabet, numerals and marks (ISO 3098-5:1997) |
|
DIN EN ISO 3166-1 |
Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2006) |
|
DIN EN ISO 3457 |
Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003) |
|
DIN EN ISO 3766 |
Construction drawings - Simplified representation of concrete reinforcement (ISO 3766:2003) |
|
DIN EN ISO 4157-1 |
Construction drawings - Designation systems - Part 1: Buildings and parts of buildings (ISO 4157-1:1998) |
|
DIN EN ISO 4157-2 |
Construction drawings - Designation systems - Part 2: Room names and numbers (ISO 4157-2:1998) |
|
DIN EN ISO 6165 |
Earth-moving machinery - Basic types - Identification and terms and definitions (ISO 6165:2006) |
|
DIN EN ISO 780 |
Packaging - Pictorial marking for handling of goods (ISO 780:1997) |
|
DIN EN ISO 9241-13 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance (ISO 9241-13:1998); English version of DIN EN ISO 9241-13 |
|
DIN EN ISO 9241-15 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues (ISO 9241-15:1997) |
|
DIN EN ISO 9241-17 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 17: Form filling dialogues (ISO 9241-17:1998); English version of DIN EN ISO 9241-17 |
|
DIN EN ISO/IEC 17020 |
General criteria for the operation of various types of bodies performing inspection (ISO/IEC 17020:1998); German and English version EN ISO/IEC 17020:2004 |
|
DIN EN ISO/IEC 17040 |
Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005); German and English version EN ISO/IEC 17040:2005 |
|
DIN IEC 60050-351 |
(DRAFT) International Electrotechnical Vocabulary - Part 351: Control Technology (IEC 65/324/CDV:2003) |
|
DIN IEC 60050-394 |
(DRAFT) International Electrotechnical Vocabulary - Part 394: Nuclear instrumentation: Instruments (IEC 1/1939/CDV:2004) |
|
DIN IEC 60050-426 |
(DRAFT) International Electrotechnical Vocabulary - Chapter 426: Equipment for explosive atmospheres (IEC 1/1976A/CDV:2005) |
|
DIN IEC 60050-581 |
(DRAFT) International Electrotechnical Vocabulary - Part 581: Electromechanical components for electronic equipment (IEC 1/1982/CDV:2006) |
|
DIN IEC 60300-3-11 |
(DRAFT) Dependability Management - Part 3-11: Application guide - Reliability centred maintenance (IEC 56/1087/CD:2005) |
|
DIN IEC 60300-3-15 |
(DRAFT) Dependability management - Part 3-15: Guidance to engineering of system dependability (IEC 56/1088/CD:2005) |
|
DIN IEC 60300-3-4 |
(DRAFT) Dependability Management - Part 3: Application Guide - Section 4: Guide to the Specification of Dependability Requirements (IEC 56/1039/CD:2005) |
|
DIN IEC 62402 |
(DRAFT) Guide to managing obsolescence (IEC 56/1000/CD:2004) |
|
DIN ISO 10003 |
(DRAFT) Quality management - Customer satisfaction - Guidelines for dispute resolution external to organizations (ISO/DIS 10003:2006); Text in German and English |
|
DIN ISO 10110-1 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 1: General (ISO 10110-1:1996) |
|
DIN ISO 10110-10 |
Optics and photonics - Preparation of drawings for optical elements and systems - Part 10: Table representing data of optical elements and cemented assemblies (ISO 10110-10:2004) |
|
DIN ISO 10110-11 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 11: Non-toleranced data (ISO 10110-11:1996) |
|
DIN ISO 10110-12 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 12: Aspheric surfaces (ISO 10110-12:1997) |
|
DIN ISO 10110-14 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance (ISO 10110-14:2003) |
|
DIN ISO 10110-17 |
Optics and photonics - Preparation of drawings for optical elements and systems - Part 17: Laser irradiation damage threshold (ISO 10110-17:2004) |
|
DIN ISO 10110-2 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 2: Material imperfections - Stress birefringence (ISO 10110-2:1996) |
|
DIN ISO 10110-3 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 3: Material imperfections; Bubbles and inclusions (ISO 10110-3:1996) |
|
DIN ISO 10110-4 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 4: Material imperfections; Inhomogenity and striae (ISO 10110-4:1997) |
|
DIN ISO 10110-5 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances (ISO 10110-5:1996, including Technical Corrigendum 1:1996) |
|
DIN ISO 10110-6 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances (ISO 10110-6:1996) |
|
DIN ISO 10110-7 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 7: Surface imperfection tolerances (ISO 10110-7:1996) |
|
DIN ISO 10110-8 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 8: Surface texture (ISO 10110-8:1997) |
|
DIN ISO 10110-9 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating (ISO 10110-9:1996) |