|
DIN EN 954-1 |
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design; German version EN 954-1:1996 |
|
DIN 18125-1 |
Laboratory tests for determination of soil density |
|
DIN EN 671-1 |
Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose; English version of DIN EN 671-1 |
|
DIN 19683-9 |
Soil testing in agricultural hydrology - Physical laboratory tests - Determining the water permeability of saturated core samples |
|
DIN 19731 |
Utilization of soil material |
|
DIN 4102-1 |
Fire behaviour of building materials and elements - Classification of building materials - Requirements and testing |
|
DIN 4102-11 |
Fire behaviour of building materials and building components; pipe encasements, pipe bushings, service shafts and ducts, and barriers across inspection openings; terminology, requirements and testing |
|
DIN 4102-4 |
Fire behaviour of building materials and elements - Overview and design of classified building materials, elements and components |
|
DIN 4150-2 |
Structural vibration - Human exposure to vibration in buildings |
|
DIN EN 12259-1 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers |
|
DIN EN 12259-2/A2 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies |
|
DIN EN 148-1 |
Respiratory protective devices - Threads for facepieces - Part 1: Standard thread connection |
|
DIN 14097-1 |
Firefigther training facilities - Part 1: General requirements |
|
DIN 14097-2 |
Firefigther training facilities - Part 2: Gas-fuelled simulation devices |
|
DIN 14097-3 |
Firefigther training facilities - Part 3: Wood-fired training facilities |
|
DIN 14097-4 |
Firefigther training facilities - Part 4: Firefigther training houses |
|
DIN 19559-1 |
Measurement of flow of waste water in open channels and gravity conduits; general information |
|
DIN 19559-2 |
Measurement of flow of waste water in open channels and gravity conduits; venturi flumes |
|
DIN 19683-16 |
Soil testing in agricultural hydrology - Physical laboratory tests - Determining the aggregate stability by wet sieving |
|
DIN 19730 |
Extraction of trace elements in soils using ammonium nitrate solution |
|
DIN 19734 |
Determining the chromium(VI) content of soil in phosphate buffered extract |
|
DIN 38402-11 |
German standard methods for the examination of water, waste water and sludge - General information (group A) - Sampling of waste water (A 11) |
|
DIN 38402-16 |
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of sea water (A 16) |
|
DIN 38407-2 |
German standard methods for the examination of water, waste water and sludge; substance group analysis (group F); determination of low-volatility halogenated hydrocarbons by gas chromatography (F 2) |
|
DIN 38414-8 |
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the amenability to anaerobic digestion (S 8) |
|
DIN 38415-1 |
German standard methods for the examination of water, waste water and sludge - Bio-assays with microorganisms (group T) Determination of organophosphate and carbamate pesticides by the cholinesterase inhibition test (T 1) |
|
DIN 4102-12 |
Fire behaviour of building materials and elements - Fire resistance of electric cable systems required to maintain circuit integrity - Requirements and testing |
|
DIN 4102-13 |
Fire behaviour of building materials and elements; fire resistant glazing; concepts, requirements and testing |
|
DIN 4102-14 |
Fire behaviour of building materials and elements; determination of the burning behaviour of floor covering systems using a radiant heat source |
|
DIN 4102-15 |
Fire behaviour of building materials and elements |
|
DIN 4102-16 |
Fire behaviour of building materials and elements - 'Brandschacht' tests |
|
DIN 4102-17 |
Fire behaviour of building materials and elements; determination of melting point of mineral fibre insulating materials; concepts, requirements and testing |
|
DIN 4102-2 |
Fire Behaviour of Building Materials and Building Components; Building Components; Definitions, Requirements and Tests |
|
DIN 4102-3 |
Fire Behaviour of Building Materials and Building Components; Fire Walls and Non-load-bearing External Walls; Definitions, Requirements and Tests |
|
DIN 4102-5 |
Fire Behaviour of Building Materials and Building Components; Fire Barriers, Barriers in Lift Wells and Glazings Resistant against Fire; Definitions, Requirements and Tests |
|
DIN 4102-6 |
Fire Behaviour of Building Materials and Building Components; Ventilation Ducts; Definitions, Requirements and Tests |
|
DIN 4102-7 |
Fire behaviour of building materials and elements - Roofing - Concepts, requirements and testing |
|
DIN 4102-8 |
Fire behaviour of building materials and components - Part 8: Small scale test furnace |
|
DIN 4102-9 |
Fire behaviour of building materials and elements; seals for cable penetrations; concepts, requirements and testing |
|
DIN 4918 |
Screwed seamless casing pipes |
|
DIN 50051 |
Testing of Materials; Burning Behaviour of Materials; Burner |
|
DIN EN 1050 |
Safety of machinery - Principles for risk assessment |
|
DIN EN 12259-4 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 4: Water motor alarms (includes Amendment A1:2001); English version of DIN EN 12259-4:2000 + A1:2001 |
|
DIN EN 352-1 |
Hearing protectors - General requirements - Part 1: Ear-Muffs |
|
DIN EN 471 |
High-visibility warning clothing for professional use - Test methods and requirements |
|
DIN EN 6059-304 |
(DRAFT) Aerospace series - Electrical cables, installation, protection sleeves; test methods - Part 304: Flammability |
|
DIN EN ISO 14122-3 |
Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001); English version of DIN EN ISO 14122-3 |
|
DIN EN ISO 14644-1 |
Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness (ISO 14644-1:1999) |
|
DIN EN ISO 22475-1 |
Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution (ISO 22475-1:2006) |
|
DIN EN ISO 7096 |
Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000); English version of DIN EN ISO 7096 |
|
DIN EN ISO 8178-4 |
Exhaust emission measurement on reciprocating internal combustion engines - Part 4: Test cycles for different engine applications (ISO 8178-4:1996) |
|
DIN EN ISO 9241-110 |
Ergonomics of human-system interaction - Part 110: Dialogue principles (ISO 9241-110:2006) |
|
DIN EN ISO 9241-12 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information (ISO 9241-12:1998); English version of DIN EN ISO 9241-12 |
|
DIN EN ISO 9241-14 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues (ISO 9241-14:1997); English version of DIN EN ISO 9241-14 |
|
DIN 18230-1 |
Structural fire protection in industrial buildings - Determining the design fire resistance time |
|
DIN 18230-2 |
Fire protection - Structural fire protection in industrial buildings - Determination of combustion factor to characterize in fire behaviour of stored materials |
|
DIN 19531-10 |
Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for drainage systems inside buildings - Part 10: Fire behaviour, quality control and installation |
|
DIN 19538-10 |
Chlorinated polyvinyl chloride (PVC-C) pipes and fittings for hot water resistant drainage systems inside buildings - Part 10: Fire behaviour, quality control and installation |
|
DIN 19605 |
Design of fixed granular-bed filters for water treatment |
|
DIN 19624 |
Precoat Filters for Water Treatment |
|
DIN 19635 |
Dosing apparatus for drinking water treatment; requirements, testing, operation; DVGW code of practice |
|
DIN 19636 |
Water softeners for use in drinking water supply installations; requirements and testing (DVGW code of practice) |
|
DIN 19643-1 |
Treatment and disinfection of water used in bathing facilities - General requirements |
|
DIN 19643-2 |
Treatment and disinfection of water used in bathing facilities - Combined adsorption, coagulation, filtration and chlorination method |
|
DIN 19643-3 |
Treatment and disinfection of water used in bathing facilities - Combined coagulation, filtration, ozonization, sorption filtration and chlorination method |
|
DIN 19643-4 |
Treatment and disinfection of water used in bathing facilities - Combined coagulation, ozonization, multi-layer filtration and chlorination method |
|
DIN 19643-5 |
Treatment and disinfection of water used in bathing facilities - Part 5: Combined coagulation, filtration, adsorption and chlorination method |
|
DIN 19650 |
Hygiene parameters for irrigation water |
|
DIN 19683-13 |
Soil testing in agricultural hydrology - Physical laboratory tests - Determining the solid matter content, porosity and voids ratio |
|
DIN 19683-14 |
Soil testing in agricultural hydrology - Physical laboratory tests - Determining the solid matter content of bog soil |
|
DIN 1988-4 |
Drinking water supply systems; drinking water protection and drinking water quality control (DVGW code of practice) |
|
DIN 1988-5 |
Drinking water supply systems; pressure boosting and reduction (DVGW code of practice) |
|
DIN 1988-8 |
Drinking water supply systems; operation (DVGW code of practice) |
|
DIN 1999-100 |
Installations for separation of light liquids - Part 100: Requirements on application of installations for separation of light liquids in accordance with DIN EN 858-1 and DIN EN 858-2 |
|
DIN 2000 |
Guidelines for drawing up requirements for the design, construction, operation and maintenance of public drinking water supply systems (DVGW Code of practice) |
|
DIN 23320-1 |
Flameproof protective clothing for firefighters in the mining industry - Safety requirements and testing |
|
DIN 31001-1 |
Safety design of technical products; Safety devices; Concepts, safety distances for adults and children |
|
DIN 33411-3 |
Human physical strength; maximum static action moments applied by male operators when actuating hand-wheels |
|
DIN 33411-4 |
Human physical strength; maximum static action forces (isodynes) |
|
DIN 33417 |
Description of position, orientation and direction of movement of objects |
|
DIN 33922 |
Guidelines for drafting public environmental reports |
|
DIN 38402-1 |
German standard methods for the examination of water, waste water and sludge; general information (group A); recording of analysis results (A 1) |
|
DIN 38402-13 |
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling from aquifers (A 13) |
|
DIN 38402-14 |
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of untreated water and drinking water (A 14) |
|
DIN 38402-15 |
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of flowing waters (A 15) |
|
DIN 38402-18 |
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of water from mineral springs and spas (A 18) |
|
DIN 38402-19 |
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of swimming pool and bathing pool water (A 19) |
|
DIN 38402-20 |
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of tidal waters (A 20) |
|
DIN 38402-22 |
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of cooling water for industrial use (A 22) |
|
DIN 38402-30 |
German standard methods for the examination of water, waste water and sludge - General information (group A) - Pretreatment, homogenization and division of non-homogeneous water samples (A 30) |
|
DIN 38402-41 |
German standard methods for the examination of water, waste water and sludge; general information (group A); inter-laboratory tests; planning and organization (A 41) |
|
DIN 38402-45 |
German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Laboratory proficiency testing by interlaboratory comparisons (A 45) |
|
DIN 38402-51 |
German standard methods for the examination of water, waste water and sludge; general information (group A); calibration of analytical methods, evaluation of analytical results and linear calibration functions used to determine the performance characteristics of analytical methods (A 51) |
|
DIN 38402-71 |
German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 71: Procedure for verifying the equivalence of two analytical methods involving quantitative characteristics with a continuous set of values (A 71) |
|
DIN 38404-10 |
German standard methods for the examination of water, waste water and sludge - Physical and physicochemical parameters (group C) - Determination of calcite saturation of water (C 10) |
|
DIN 38404-13 |
German standard methods for the examination of water, waste water and sludge; physical and physicochemical parameters (group C); determination of tritium (C 13) |
|
DIN 38404-15 |
German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of beta activity per unit volume in drinking water, ground water, surface water and waste water (C 15) |
|
DIN 38404-16 |
German standard methods for the examination of water, waste water and sludge; physical and physicochemical parameters (group C); determination of radionuclides in drinking water, ground water, surface water and waste water by γ-ray spectrometry (C 16) |
|
DIN 38404-18 |
German standard methods for the examination of water, waste water and sludge - Physical and physicochemical parameters (group C) - Determination of radium 226 concentration in drinking water, ground water and waste water (C 18) |
|
DIN 38404-4 |
German Standard Methods for Analysing of Water, Waste Water and Sludge; Physical and Physical-chemical Parameters (Group C); Determination of Temperature (C4) |
|
DIN 38404-5 |
German standard methods for examination of water, waste water and sludge; physical and physico-chemical characteristics (group C); determination of pH value (C5) |
|
DIN 38404-6 |
German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of the oxidation reduction (redox) potential (C 6) |
|
DIN 38405-1 |
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of chloride ions (D 1) |
|
DIN 38405-13 |
German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Cyanides (D 13) |
|
DIN 38405-14 |
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of cyanides in drinking water, and in groundwater and surface water with low pollution levels (D 14) |
|
DIN 38405-17 |
German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Borate Ions (D 17) |
|
DIN 38405-21 |
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of dissolved silicate by spectrometry (D 21) |
|
DIN 38405-23 |
German standard methods for the examination of water, waste water and sludge - Anions (group D) - Determination of selenium by atomic absorption spectrometry (AAS) (D 23) |
|
DIN 38405-24 |
German standard methods for the examination of water, waste water and sludge; anions (group D); photometric determination of chromium(VI) using 1,5-diphenylcarbonohydrazide (D 24) |
|
DIN 38405-26 |
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of dissolved sulfide by spectrometry (D 26) |
|
DIN 38405-27 |
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of readily liberatet sulfide (D 27) |
|
DIN 38405-29 |
German standard methods for the examination of water, waste water and sludge - Anions (group D) - Photometric determination of nitrate using sulfosalicylic acid (D 29) (modified version of ISO 7890-3:1988) |
|
DIN 38405-32 |
German standard methods for the examination of water, waste water and sludge - Anions (group D) - Determination of antimony by atomic absorption spectrometry (D 32) |
|
DIN 38405-33 |
German standard methods for the examination of water, waste water and sludge - Anions (group D) - Determination of iodide by photometry (D 33) |
|
DIN 38405-4 |
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of fluoride (D 4) |
|
DIN 38405-5 |
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of sulfate ions (D 5) |
|
DIN 38405-7 |
German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 7: Determination of cyanides in low polluted water by ion chromatography or potentiometric titration (D 7) |
|
DIN 38406-11 |
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of nickel by atomic absorption spectrometry (AAS) (E 11) |
|
DIN 38406-13 |
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of potassium by atomic absorption spectrometry (AAS) using an air-acetylene flame (E 13) |
|
DIN 38406-14 |
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of sodium by atomic absorption spectrometry (ASS) using an air-acetylene flame (E 14) |
|
DIN 38406-16 |
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of zinc, cadmium, lead, copper, thallium, nickel, cobalt by voltammetry (E 16) |
|
DIN 38406-18 |
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of dissolved silver by atomic absorption spectrometry using electrothermal atomization (E 18) |
|
DIN 38406-2 |
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of manganese (E 2) |
|
DIN 38406-24 |
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of cobalt by atomic absorption spectrometry (AAS) (E 24) |
|
DIN 38406-26 |
German standard methods for the examination of water, waste water and sludge - Cations (group E) - Determination of thallium by atomic absorption spectrometry (AAS) using a graphite furnace (E 26) |
|
DIN 38406-3 |
German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 3: Determination of calcium and magnesium, complexometric tritation (E 3) |
|
DIN 38406-32 |
German standard methods for the examination of water, waste water and sludge - Cations (group E) - Determination of iron by atomic absorption spectrometry (AAS) (E 32) |
|
DIN 38406-33 |
German standard methods for the examination of water, waste water and sludge - Cations (group E) - Determination of manganese by atomic absorption spectrometry (E 33) |
|
DIN 38406-6 |
German standard methods for the examination of water, waste water and sludge - Cations (group E) - Determination of lead by atomic absorption spectrometry (AAS) (E6) |
|
DIN 38406-7 |
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of copper by atomic absorption spectrometry (AAS) (E 7) |
|
DIN 38407-14 |
German standard methods for the examination of water, waste water and sludge - Substance group analysis (group F) - Determination of phenoxyalkanecarboxylic acids by gas chromatography and mass spectrometry after solid-liquid extraction and derivatization (F 14) |
|
DIN 38407-16 |
German standard methods for the examination of water, waste water and sludge - Substance group analysis (Group F) - Determination of aniline derivatives by gas chromatography (F 16) |
|
DIN 38407-17 |
German standard methods for the examination of water, waste water and sludge - Substance group analysis (group F) - Part 17: Determination of selected nitroaromatics by gas chromatography (F 17) |
|
DIN 38407-22 |
German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 22: Determination of Glyphosate and Aminomethyl phosphic acid (AMPA) by high performance liquid chromatography (HPLC), post-column derivatization and fluorescence detection (F 22) |
|
DIN 38407-3 |
German standard methods for the examination of water, waste water and sludge - Substance group analysis (group F) - Part 3: Determination of polychlorinated biphenyls (PCBs) by gas chromatography (F 3) |
|
DIN 38407-7 |
German standard methods for the examination of water, waste water and sludge - Substance group analysis (group F) - Part 7: Determination of six polycyclic aromatic hydrocarbons (PAHs) in drinking and mineral water by high-performance thin-layer chromatography (HPTLC) (F7) |
|
DIN 38407-8 |
German standard methods for the examination of water, waste water and sludge - Substance group analysis (group F) - Determination of six polycyclic aromatic hydrocarbons (PAHs) in water by means of high performance liquid chromatography (HPLC) using fluorescence detection (F 8) |
|
DIN 38407-9 |
German standard methods for the examination of water, waste water and sludge; substance group analysis (group F); determination of benzene and some of its derivatives by gas chromatography (F 9) |
|
DIN 38408-23 |
German standard methods for the examination of water, waste water and sludge; gaseous constituents (group G); determination of oxygen saturation index (G 23) |
|
DIN 38408-3 |
German standard methods for the examination of water, waste water and sludge - Gaseous components (group G) - Determination of ozone (G 3) |
|
DIN 38408-5 |
German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of chlorine dioxide (G 5) |
|
DIN 38409-1 |
German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of total dry residue, filtrate dry residue and residue on ignition (H 1) |
|
DIN 38409-2 |
German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of filterable matter and the residue on ignition (H 2) |
|
DIN 38409-20 |
German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of substances that react with disulfine blue (H 20) |
|
DIN 38409-22 |
German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 22: Determination of dissolved adsorbable and organically bound halogens in highly saline water following solid-phase enrichment (SPE-AOX) (H 22) |
|
DIN 38409-26 |
German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of the bismut-chelating index IBiK (H 26) |
|
DIN 38409-27 |
German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of total bound nitrogen TNb (H 27) |
|
DIN 38409-28 |
German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of bound nitrogen after reduction with Devarda's alloy and catalytic digestion (H 28) |
|
DIN 38409-41 |
German Standard Methods for Examination of Water, Waste Water and Sludge; Summary Action and Material Characteristic Parameters (Group H); Determination of the Chemical Oxygen Demand (COD) in the Range over 15 mg/l (H41) |
|
DIN 38409-43 |
German standard methods for the analysis of water, waste water and sludge; Summary action and material characteristic parameters (group H); Determination for the chemical oxygen demand (COD); short duration method (H 43) |
|
DIN 38409-44 |
German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of the chemical oxygen demand (COD), ranging from 5 to 50 mg/l (H 44) |
|
DIN 38409-6 |
German standard methods for the examination of water, waste water and sludge; summary indices of actions and substances (group H); water hardness (H 6) |
|
DIN 38409-7 |
German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 7: Determination of acid and base-neutralizing capacities (H 7) |
|
DIN 38412-11 |
German standard methods for the examination of water, waste water and sludge; Test methods using water organisms (group L); Determination of the effect on microcrustacea of substances contained in water (Daphnia short-time test) (L 11) |
|
DIN 38412-13 |
German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of oxygen production and oxygen consumption in an aquatic environment (SPG and SVG) by means of the light and dark bottle method (L 13) (determination of biogenic aeration rate) |
|
DIN 38412-14 |
German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of oxygen production by means of the light and dark bottle method under laboratory conditions (SPL) (L 14) (determination of oxygen production potential) |
|
DIN 38412-16 |
German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of chlorophyll a in surface water (L 16) |
|
DIN 38412-26 |
German standards methods for the examination of water, waste water and sludge - Bio-assays (group L) - Surfactant biodegradation and elimination test simulating municipal waste water treatment (L 26) |
|
DIN 38412-27 |
German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determination of the inhibitory effect of waste water on the oxygen consumption of Pseudomonas putida (L 27) |
|
DIN 38412-30 |
German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of Daphnia to the toxicity of waste water by way of a dilution series (L 30) |
|
DIN 38412-31 |
German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of fish to the toxicity of waste water by way of a dilution series (L 31) |
|
DIN 38412-33 |
German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of green algae to the toxicity of waste water (Scenedesmus chlorophyll fluorescence test) by way of dilution series (L 33) |
|
DIN 38412-37 |
German standard methods for the examination of water, waste water and sludge - Bio-assays (group L) - Determination of the inhibitory effect of water on the growth of Photobacterium phosphoreum (cell multiplication inhibition test) (L 37) |
|
DIN 38412-48 |
German standard methods for the examination of water, waste water and sludge - Bio-assays (group L) - Part 48: Arthrobacter globiformis toxicity test for polluted solid material (L 48) |
|
DIN 38413-1 |
German standard methods for the analysis of water, waste water and sludge; Individual components (Group P); Determination of hydrazine (P 1) |
|
DIN 38413-2 |
German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of vinyl chloride by headspace gas chromatography (P 2) |
|
DIN 38413-4 |
German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of carbon disulfide (P 4) |
|
DIN 38413-5 |
German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) by polarography (P 5) |
|
DIN 38413-8 |
German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 8: Determination of nitrilotriacetic acid (NTA), ethylenedinitrilotetraacetic acid (EDTA) and diethylenetrinitrilopentaacetic acid (DTPA) by liqid chromatography (P 8) |
|
DIN 38414-11 |
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); sampling of sediments (S 11) |
|
DIN 38414-12 |
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of phosphorus in sludges and sediments (S 12) |
|
DIN 38414-13 |
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); detection of salmonellae in disinfected sewage sludge (S 13) |
|
DIN 38414-15 |
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the specific residual beta activity in sludge, sediment and suspended matter (S 15) |
|
DIN 38414-17 |
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of strippable and extractable organically bound halogens (S 17) |
|
DIN 38414-18 |
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of adsorbed organically bound halogens (AOX) (S 18) |
|
DIN 38414-19 |
German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 19: Determination of the steam-volatile organic acids (S 19) |
|
DIN 38414-20 |
German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Determination of six selected polychlorinated biphenyls by gas chromatography (S 20) |
|
DIN 38414-21 |
German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Determination of six selected polycyclic aromatic hydrocarbons by high performance liquid chromatography (HPLC) using fluorescence detection (S 21) |
|
DIN 38414-22 |
German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 22: Freeze-drying of sludge and determination of freeze-drying residue (S 22) |
|
DIN 38414-23 |
German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Determination of 15 polycyclic aromatic hydrocarbons by high performance liquid chromatography (HPLC) using fluorescence detection (S 23) |
|
DIN 38414-24 |
German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 24: Determination of polychlorinated dibenzodioxins (PCDDs) and polychlorinated dibenzofuranes (PCDFs) (S 24) |
|
DIN 38414-4 |
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of leachability by water (S 4) |
|
DIN 38414-6 |
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of oxygen consumption rate (S 6) |
|
DIN 38414-9 |
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the chemical oxygen demand (COD) (S 9) |
|
DIN 38415-3 |
German standard methods for the examination of water, waste water and sludge - Bio-assays with microorganisms (group T) - Part 1: Determination of the mutagenic potential of water using the umu-test (T 3) |
|
DIN 38415-4 |
German standard methods for the examination of water, waste water and sludge - Bioassays with microorganisms (group T) - Part 4: Determination of the mutagenic potential of water using the Salmonella microsome test (Ames Test) (T 4) |
|
DIN 38415-6 |
German standard methods for the examination of water, waste water and sludge - Subanimal testing (group T) - Part 6: Determination of the effect of nonacute toxicity of waste water on the development of fish eggs (K 9) |
|
DIN 4040-100 |
Grease separators - Part 100: Requirements on applications for separation of greases in accordance with DIN EN 1825-1 and DIN EN 1825-2 |
|
DIN 4942 |
DN 50 to DN 200 screwed steel well tubing |
|
DIN 50050-1 |
Testing of materials; burning behaviour of materials; small burning cabinet |
|
DIN 50050-2 |
Testing the burning behaviour of materials; large burning cabinet |
|
DIN 50931-1 |
Corrosion testing of drinking water distribution systems - Part 1: Determining changes to the composition of drinking water |
|
DIN 53438-1 |
Testing of combustible materials; response to ignition by a small flame; general data |
|
DIN 53438-2 |
Testing of combustible materials; response to ignition by a small flame; edge ignition |
|
DIN 53438-3 |
Testing of combustible materials; response to ignition by a small flame; surface ignition |
|
DIN 54332 |
Testing of Textiles; Determination of the Burning Behaviour of Textile Floor Coverings |
|
DIN 54836 |
Testing of combustible materials; determination of ignition temperature |
|
DIN EN 1005-1 |
Safety of machinery - Human physical performance - Part 1: Terms and definitions; English version of DIN EN 1005-1 |
|
DIN EN 1005-3 |
Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation; English version of DIN EN 1005-3 |
|
DIN EN 1005-4 |
Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
|
DIN EN 1032 |
Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
|
DIN EN 1063 |
Glass in building - Security glazing - Testing and classification of resistance against bullet attack; English version of DIN EN 1063 |
|
DIN EN 1088 |
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
|
DIN EN 12094-13 |
Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves; English version of DIN EN 12094-13 |
|
DIN EN 12101-10 |
Smoke and heat control systems - Part 10: Power supplies |
|
DIN EN 12101-3 |
Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators |
|
DIN EN 12101-3 Berichtigung 1 |
Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators; Corrigenda to DIN EN 12101-3:2002-06 |
|
DIN EN 12259-3 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies (includes Amendment A1:2001); English version of DIN EN 12259-3:2000 + A1:2001 |
|
DIN EN 12259-3/A2 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies |
|
DIN EN 12259-5 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors |
|
DIN EN 12568 |
Foot and leg protectors - Requirements and test methods for toecaps and metal penetration resistant inserts |
|
DIN EN 12574-1 |
Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design |
|
DIN EN 12574-2 |
Stationary waste containers - Part 2: Performance requirements and test methods |
|
DIN EN 12574-3 |
Stationary waste containers - Part 3: Safety and health requirements |
|
DIN EN 132 |
Respiratory protective devices - Definitions of terms and pictograms |
|
DIN EN 13432 |
Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging; English version of DIN EN 13432 |
|
DIN EN 13526 |
Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method; English version of DIN EN 13526 |
|
DIN EN 13592 Berichtigung 1 |
Plastics sacks for household waste collection - Types, requirements and test methods; Corrigenda to DIN EN 13592:2003-07 |
|
DIN EN 137 |
Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking |
|
DIN EN 138 |
Respiratory protective devices - Fresh air hose breathing apparatus for use with full mask, half mask or mouthpiece assembly - Requirements, testing and marking |
|
DIN EN 13861 |
Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
|
DIN EN 13920-14 |
Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings |
|
DIN EN 13920-2 |
Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap |
|
DIN EN 13920-8 |
Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes |
|
DIN EN 14025 Berichtigung 1 |
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; Corrigendum 1 to DIN EN 14025:2004-02 |
|
DIN EN 14384 |
Pillar fire hydrants |
|
DIN EN 14387 |
Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking |
|
DIN EN 14652 |
Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing |
|
DIN EN 14789 |
Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism |
|
DIN EN 148-2 |
Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection |
|
DIN EN 148-3 |
Respiratory protective devices - Threads for facepieces - Part 3: Thread connection M 45 x 3 |
|
DIN EN 1624 |
Burning behaviour of industrial and technical textiles - Procedure to determine the flame spread of vertically oriented specimens |
|
DIN EN 170 |
Personal eye protection - Ultraviolet filters - Transmittance requirements and recommended use |
|
DIN EN 174 |
Personal eye-protection - Ski goggles for downhill skiing; English version of DIN EN 174 |
|
DIN EN 1760-1 |
Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for the design and testing of pressure-sensitive mats and pressure-sensitive floors |
|
DIN EN 1866 |
Mobile fire extinguishers |
|
DIN EN 1869 |
Fire blankets; English version of DIN EN 1869 |
|
DIN EN 1992-1-2 |
Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design |
|
DIN EN 1994-1-2 |
Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design |
|
DIN EN 29241-3 |
Ergonomic requirements for office work with visual display terminals (VDTs); part 3: visual display requirements (ISO 9241-3:1992); German version EN 29241-3:1993 |
|
DIN EN 294 |
Safety of machinery; safety distances to prevent danger zones from being reached by the upper limbs; german version EN 294:1992 |
|
DIN EN 3 Beiblatt 2 |
Interpretation document of EN 3 - Portable fire extinguishers; German version CR 13934:2000 |
|
DIN EN 340 |
Protective clothing - General requirements |
|
DIN EN 349 |
Safety of machinery; minimum gaps to avoid crushing of parts of the human body; German version EN 349:1993 |
|
DIN EN 443 |
Helmets for firefighters |
|
DIN EN 54-11/A1 |
Fire detection and fire alarm systems - Part 11: Manual call points |
|
DIN EN 694 Berichtigung 2 |
Corrigenda to DIN EN 694:2001-12 (EN 694:2001/AC:2003) |
|
DIN EN 838 |
Workplace atmospheres - Diffusive samplers for the determination of gases and vapours - Requirements and test methods |
|
DIN EN 960 |
Headforms for use in the testing of protective helmets |
|
DIN EN 999 |
Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
|
DIN EN ISO 11885 |
Determination of 33 elements in water by inductively coupled plasma atomic emission spectroscopy (ISO 11885:1996) |
|
DIN EN ISO 12100-2 |
Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003) |
|
DIN EN ISO 13732-1 |
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
|
DIN EN ISO 13732-3 |
Ergonomic of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005) |
|
DIN EN ISO 14001 |
Environmental management systems - Requirements with guidance for use (ISO 14001:2004); German and English version EN ISO 14001:2004 |
|
DIN EN ISO 14644-2 |
Cleanrooms and associated controlled environments - Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 (ISO 14644-2:2000); English version of DIN EN ISO 14644-2 |
|
DIN EN ISO 14688-1 |
Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2002) |
|
DIN EN ISO 14688-2 |
Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification (ISO 14688-2:2004) |
|
DIN EN ISO 19011 |
Guidelines for quality and/or environmental management systems auditing (ISO 19011:2002); German version EN ISO 19011:2002 |
|
DIN EN ISO 3411 |
Earth-moving machinery - Human physical dimensions of operators and minimum operator space envelope (ISO 3411:1995) |
|
DIN EN ISO 4589-3 |
Determination of burning behaviour of plastics by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:1996) English version of DIN EN ISO 4589-3 |
|
DIN EN ISO 7346-1 |
Determination of the acute lethal toxicity of substances in water to a freshwater fish AeBrachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)Ue - Part 1: Static method (ISO 7346-1:1996) |
|
DIN EN ISO 8041 |
Human response to vibration - Measuring instrumentation (ISO 8041:2005) |
|
DIN EN ISO 8178-6 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test (ISO 8178-6:2000); English version of DIN EN ISO 8178-6:2001 |
|
DIN EN ISO 8662-4 |
Hand-held portable power tools - Measurement of vibrations at the handle - Grinders (ISO 8662-4:1994) |
|
DIN EN ISO 8662-8 |
Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997) |
|
DIN EN ISO 9241-11 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability (ISO 9241-11:1998) |
|
DIN EN ISO 9241-13 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance (ISO 9241-13:1998); English version of DIN EN ISO 9241-13 |
|
DIN EN ISO 9241-15 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues (ISO 9241-15:1997) |
|
DIN EN ISO 9241-16 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 16: Direct manipulation dialogues (ISO 9241-16:1999); English version of DIN EN ISO 9241-16 |
|
DIN EN ISO 9241-17 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 17: Form filling dialogues (ISO 9241-17:1998); English version of DIN EN ISO 9241-17 |
|
DIN EN ISO 9241-6 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999); English version of DIN EN ISO 9241-6 |
|
DIN EN ISO 9241-7 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 7: Requirements for display with reflections (ISO 9241-7:1998) |
|
DIN EN ISO 9241-9 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 9: Requirements for non-keyboard input devices (ISO 9241-9:2000); English version of DIN EN ISO 9241-9 |
|
DIN ISO 10381-1 |
Soil quality - Sampling - Part 1: Guidance on the design of sampling programmes (ISO 10381-1:2002) |
|
DIN ISO 10381-2 |
Soil quality - Sampling - Part 2: Guidance on sampling techniques (ISO 10381-2:2002) |
|
DIN ISO 10381-3 |
Soil quality - Sampling - Part 3: Guidance on safety (ISO 10381-3:2001) |
|
DIN ISO 10693 |
Soil quality - Determination of carbonate content - Volumetric method (ISO 10693:1995) |
|
DIN ISO 11048 |
Soil quality - Determination of water-soluble and acid soluble sulfate (ISO 11048:1995) |
|
DIN ISO 11259 |
Soil quality - Simplified soil description (ISO 11259:1998) |
|
DIN ISO 11265 |
Soil quality - Determination of the specific electrical conductivity (ISO 11265:1994 + Corr 1:1996) |
|
DIN ISO 11271 |
Soil quality - Determination of redox potential - Field method (ISO 11271:2002) |
|
DIN ISO 11272 |
Soil quality - Determination of dry bulk density (ISO 11272:1998) |
|
DIN ISO 11274 |
Soil quality - Determination of the water retention characteristics - Laboratory methods (ISO 11274:1998) |
|
DIN ISO 11276 |
Soil quality - Determination of pore water pressure - Tensiometer methods (ISO 11276:1995) |
|
DIN ISO 11277 |
Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation (ISO 11277:1998 + Corr 1:2002) |
|
DIN ISO 11508 |
Soil quality - Determination of particle density (ISO 11508:1998) |
|
DIN ISO 14004 |
Environmental management systems - General guidelines on principles, systems and support techniques (ISO 14004:2004) |
|
DIN ISO 14507 |
Soil quality - Pretreatment of samples for determination of organic contaminants (ISO 14507:2003) |
|
DIN ISO 14869-1 |
Soil quality - Dissolution for the determination of total element content - Part 1: Dissolution with hydrofluoric and perchloric acids (ISO 14869-1:2001) |
|
DIN ISO 14869-2 |
Soil quality - Dissolution for the determination of total element content - Part 2: Dissolution by alkaline fusion (ISO 14869-2:2002) |
|
DIN ISO 14870 |
Soil quality - Extraction of trace elements by buffered DTPA solution (ISO 14870:2001) |
|
DIN ISO 15175 |
Soil quality - Characterization of soil related to groundwater protection (ISO 15175:2004) |
|
DIN ISO 15473 |
Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions (ISO 15473:2002) |
|
DIN ISO 15799 |
Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials (ISO 15799:2003) |
|
DIN ISO 15800 |
Soil quality - Characterization of soil with respect to human exposure (ISO 15800:2003) |
|
DIN ISO 15903 |
Soil quality - Format for recording soil and site information (ISO 15903:2002) |
|
DIN ISO 226 |
Acoustics - Normal equal-loudness-level contours (ISO 226:2003) |
|
DIN ISO 4225 |
Air quality - General aspects - Vocabulary (ISO 4225:1994) |
|
DIN 30750 |
Mobile, non-sewer-connected toilet cabins - Requirements and services relating to the deployment of cabins and sanitary products |