|
DIN 7168 |
General tolerances for linear and angular dimensions and geometrical tolerances (not to be used for new designs) |
|
DIN EN ISO/IEC 17025 |
General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005); German and English version EN ISO/IEC 17025:2005 |
|
DIN EN ISO 1302 |
Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002) |
|
DIN EN ISO 1101 |
Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004) |
|
DIN 7167 |
Relationship between tolerances of size, form, and parallelism; envelope requirement without individual indication on the drawing |
|
DIN EN ISO 9013 |
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2002) |
|
DIN EN 473 |
Non destructive testing - Qualification and certification of NDT personnel - General principles |
|
DIN EN ISO 10012 |
Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003); Trilingual version EN ISO 10012:2003 |
|
DIN EN ISO 354 |
Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
|
DIN IEC 60751 |
(DRAFT) Industrial platinum resistance thermometer sensors (IEC 65B/541/CD:2004) |
|
DIN ISO 10816-1 |
Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines (ISO 10816-1:1995) |
|
DIN ISO 10816-3 |
Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ (ISO 10816-3:1998) |
|
DIN 158-2 |
Metric taper external and mating internal parallel screw thread - Gauges and gauging |
|
DIN 2254-1 |
General purpose NOT GO ring gauges with nominal diameters from 1 mm to 315 mm |
|
DIN 45635-11 |
Measurement of noise emitted by machines; airborne noise emission, enveloping surface method; internal combustion engines |
|
DIN 7162 |
Plain Workshop and Inspection Gauges; Manufacturing Tolerances and Permissible Wear |
|
DIN 863-1 |
Micrometers - Standard design external micrometers - Concepts, requirements and testing |
|
DIN 863-4 |
Micrometers - Internal micrometers - Concepts, requirements and testing |
|
DIN EN 125 |
Flame supervision devices for gas-burning appliances - Thermo-electric types |
|
DIN EN ISO 4287 |
GPS - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997) |
|
DIN EN ISO 7500-1 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004) |
|
DIN EN ISO 9227 |
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2006) |
|
DIN ISO 10816-2 |
Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min (ISO 10816-2:2001) |
|
DIN ISO 10816-4 |
Evaluation of machine vibration by measurements on non-rotating parts - Part 4: Gas turbine driven sets excluding aircraft derivatives (ISO 10816-4:1998) |
|
DIN ISO 10816-6 |
Evaluation of machine vibration by measurements on non-rotating parts - Part 6: Reciprocating machines with power ratings above 100 kW (ISO 10816-6:1995) |
|
DIN 18041 |
Acoustical quality in small to medium-sized rooms |
|
DIN 19559-1 |
Measurement of flow of waste water in open channels and gravity conduits; general information |
|
DIN 19559-2 |
Measurement of flow of waste water in open channels and gravity conduits; venturi flumes |
|
DIN 2250-2 |
GO ring gauges and setting ring gauges from 1 mm up to 315 mm nominal diameter for use in precision engineering |
|
DIN 2299-1 |
NOT GO screw ring gauges for general purpose ISO metric screw threads with nominal diameter from 1 mm to 200 mm |
|
DIN 2299-2 |
NOT GO screw ring gauges for ISO metric screw threads with nominal diameters from 50 mm to 200 mm for use in precision engineering |
|
DIN 250 |
Radii on workpieces and their representation in technical drawings |
|
DIN 323-1 |
Preferred Numbers and Series of Preferred Numbers; Basic Values, Calculated Values, Rounded Values |
|
DIN 323-2 |
Preferred Numbers and Series of Preferred Numbers; Introduction |
|
DIN 40431-1 |
Steel Conduit Thread; Thread Gauges, |
|
DIN 43732 |
Measurement and control; electrical temperature sensors; thermocouples for thermocouple thermometers |
|
DIN 43762 |
Measurement and control; electrical temperature sensors; sensor units for resistance thermometers |
|
DIN 43771 |
Measurement and control; electrical temperature sensors; fast response thermometers |
|
DIN 45635 Beiblatt 2 |
Measurement of noise emitted by machines; Explanatory notes on noise emission parameters |
|
DIN 45635-12 |
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Electrical switchgear and control gear |
|
DIN 45635-38 |
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method, reverberation room method and in-duct method; fans |
|
DIN 45635-45 |
Measurement of airborne noise emitted by machines; enveloping surface method; continuous handling equipment |
|
DIN 45635-49 |
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; surface treatment plants |
|
DIN 45645-2 |
Determining noise rating levels from measured data - Part 2: Occupational noise |
|
DIN 45669-1 |
Mechanical vibration and shock measurement - Part 1: Measuring equipment |
|
DIN 45669-2 |
Measurement of vibration immission - Part 2: Measuring method |
|
DIN 45680 |
Measurement and evaluation of low-frequency environmental noise |
|
DIN 50010-2 |
Climates and their technical application; climatological terms and definitions; physical terms and definitions |
|
DIN 50011-11 |
Climates and their technical application; controlled-atmosphere test installations; general terminology and requirements |
|
DIN 50011-12 |
Artificial climates in technical applications; air temperature as a climatological quantity in controlled-atmosphere test installations |
|
DIN 50011-2 |
Testing of Materials, Structural Components and Equipment; Hot Cabinets; Directions for the Storage of Specimens |
|
DIN 50051 |
Testing of Materials; Burning Behaviour of Materials; Burner |
|
DIN 51302-2 |
Strain cylinder test for verifying compression testing machines for testing concrete |
|
DIN 53015 |
Viscometry - Measurement of viscosity using the Hoeppler falling-ball viscometer |
|
DIN 53019-1 |
Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system |
|
DIN 53019-2 |
Viscosimetry - Determination of viscosity and flow curves with rotational viscosimeters - Part 2: Viscosimeter calibration and determination of the uncertainty of measurement |
|
DIN 6174 |
Colorimetric Evaluation of Colour Differences of Surface Colours According to the CIELAB Formula |
|
DIN 66165-1 |
Particle size analysis; sieve analysis; general principles |
|
DIN 66165-2 |
Particle size analysis; sieve analysis; procedure |
|
DIN 7157 |
Recommended Selection of Fits; Tolerance Zones, Allowances, Fit Tolerances |
|
DIN 7172 |
Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations |
|
DIN 876-1 |
Surface plates; natural hard rock surface plates; requirements and testing |
|
DIN 876-2 |
Surface plates; cast iron surface plates, requirements and testing |
|
DIN 877 |
Inclination measuring instruments (levels) |
|
DIN EN 12053 |
Safety of industrial trucks - Test methods for measuring noise emissions |
|
DIN EN 1369 |
Founding - Magnetic particle inspection |
|
DIN EN 1370 |
Founding - Surface roughness inspection by visualtactile comparators |
|
DIN EN ISO 3650 |
Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998) |
|
DIN EN ISO 5458 |
GPS - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998) |
|
DIN EN ISO 6508-2 |
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-2:2005) |
|
DIN EN ISO 8178-4 |
Exhaust emission measurement on reciprocating internal combustion engines - Part 4: Test cycles for different engine applications (ISO 8178-4:1996) |
|
DIN EN ISO/IEC 17025 Berichtigung 1 |
General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005); German and English version EN ISO/IEC 17025:2005, Corrigenda to DIN EN ISO/IEC 17025:2005-08; German and English version EN ISO/IEC 17025:2005/AC:2006 |
|
DIN EN ISO/IEC 17025 Berichtigung 2 |
General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005); German and English version EN ISO/IEC 17025:2005, Corrigenda to DIN EN ISO/IEC 17025:2005-08; German and English version EN ISO/IEC 17025:2005/AC:2006 |
|
DIN IEC 60584-3 |
(DRAFT) Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification systems (IEC 65B/542/CD:2004) |
|
DIN ISO 16063-21 |
Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer (ISO 16063-21:2003) |
|
DIN ISO 9022-20 |
Optics and optical instruments - Environmental test methods - Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide (ISO 9022-20:1997) |
|
DIN ISO 9022-4 |
Optics and optical instruments - Environmental test methods - Part 4: Salt mist (ISO 9022-4:2002) |
|
DIN ISO 9045 |
Industrial screens and screening - Vocabulary (ISO 9045:1990) |
|
DIN 103-9 |
ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features |
|
DIN 12878 |
Electrical laboratory equipment; adjustable liquid-in-glass contact thermometers and control devices; general and safety requirements, testing |
|
DIN 1305 |
Mass, as weighed value, force, weight force, weight, load; concepts |
|
DIN 1311 Beiblatt 2 |
Vibration and shock - Dictionary |
|
DIN 1317-1 |
Standard Tuning; Standard Musical Pitch |
|
DIN 1317-2 |
Standard Tuning; Tuning-fork |
|
DIN 1317-3 |
Standard Tuning; Tuning Frequency for Organs |
|
DIN 1319-1 |
Basic concepts in metrology - General concepts |
|
DIN 1319-3 |
Basic concepts in metrology - Evaluating measurements of a single measurand and expression of uncertainty |
|
DIN 16167 |
Industrial straight stem liquid-in-glass thermometers with round case, of nominal size 160; dimensions anf nominal ranges |
|
DIN 16168 |
Industrial 90° angle stem liquid-in-glass thermometers with round case, of nominal size 160; dimensions and nominal ranges |
|
DIN 16174 |
Industrial straight stem liquid-in glass thermometer with round case, of nominal size 250; dimensions and nominal ranges |
|
DIN 16175 |
Industrial 90° angle stem liquid-in-glass thermometers with round case, of nominal size 250; dimensions and nominal ranges |
|
DIN 16176 |
Industrial 135 ° angle stem liquid-in-glass thermometers with round case, of nominal size 250; dimensions and nominal ranges |
|
DIN 16181 |
Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 110; dimensions and nominal ranges |
|
DIN 16182 |
Industrial 90° angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 110; dimensions and nominal ranges |
|
DIN 16185 |
Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 150; dimensions and nominal ranges |
|
DIN 16186 |
Industrial 90° angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 150; dimensions and nominal ranges |
|
DIN 16189 |
Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 200; dimensions and nominal ranges |
|
DIN 16190 |
Industrial 90° angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 200; dimensions and nominal ranges |
|
DIN 16195 |
Industrial liquid-in-glass thermometers with round or V-shaped cade; requirements and testing |
|
DIN 1943 |
Thermal acceptance tests of steam turbines |
|
DIN 19752 |
Hydroelectric power plants; rules for planning and operation |
|
DIN 2240-1 |
Geometrical Product Specification (GPS) - Gauge handles for gauging members up to 40 mm nominal diameter with 1:50 taper shank |
|
DIN 2240-2 |
Geometrical product specification (GPS) - Gauge handles for gauging members over 40 mm nominal diameter: Handles, fixing screws and locking prongs |
|
DIN 2240-3 |
Geometrical Product Specification (GPS) - Gauge handles for gauging members for use in precision engineering |
|
DIN 2248-1 |
GO gauging members with nominal diameters from 1 mm to 40 mm |
|
DIN 2249-1 |
NOT GO gauging members with nominal diameters from 1 mm to 40 mm |
|
DIN 2250-1 |
General-purpose GO ring gauges and setting ring gauges for pneumatic length measuring instruments from 1 mm up to 315 mm nominal diameter |
|
DIN 2254-2 |
NOT GO ring gauges with nominal diameters from 1 mm to 315 mm, for use in precision engineering |
|
DIN 2257-1 |
Terminology used in dimensional metrology; Units, activities, checking instruments; Metrological concepts |
|
DIN 2270 |
Lever gauges |
|
DIN 2271-1 |
Pneumatic Length Measurement (Air Gauging); Principles, Methods |
|
DIN 2271-2 |
Pneumatic Length Measurement (Air Gauging); Design Features of Instruments Working in the High Pressure Range |
|
DIN 2271-3 |
Verification of geometrical parameters - Pneumatic length measurement (air gauging) - Part 3: Characteristics of instruments working in the high pressure range; requirements, testing |
|
DIN 2271-4 |
Pneumatic Length Measurement (Air Gauging); General Information and Examples of Application |
|
DIN 2272-1 |
Inspection equipment used in dimensional metrology; requirements; auxiliary measuring devices |
|
DIN 2273 |
Sine bars |
|
DIN 2274 |
Inspection vee blocks; designs, requirements |
|
DIN 2275 |
Feeler Gauges |
|
DIN 2276-1 |
Inclination measuring systems; cylindrical spirit level vials; dimensions and requirements |
|
DIN 2276-2 |
Inclination measuring systems; electronic inclination measuring systems; types and requirements |
|
DIN 2277 |
Circular Levels; Terms, Construction |
|
DIN 2278 |
Dirt Grooves on Screw Thread Gauges for Screw Threads with ISO Metric Profile |
|
DIN 2279 |
Geometrical product specifications (GPS) - Gauges for internal and external ISO metric screw threads - Overview of types, marking and application |
|
DIN 2280 |
Geometrical product specifications (GPS) - GO and NOT GO screw plug gauges for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm |
|
DIN 2281-1 |
Geometrical product specifications (GPS) - GO workshop screw plug gauges, check and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm |
|
DIN 2281-2 |
Geometrical product specifications (GPS) - GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm |
|
DIN 2281-3 |
Geometrical product specifications (GPS) - GO workshop screw plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering |
|
DIN 2282-1 |
GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm to 40 mm |
|
DIN 2282-2 |
Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm |
|
DIN 2282-3 |
Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering |
|
DIN 2283-1 |
Geometrical product specifications (GPS) - NOT GO workhop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm |
|
DIN 2283-2 |
Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with diameters over 40 mm up to 200 mm |
|
DIN 2283-3 |
Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges and check plug for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering |
|
DIN 2284-1 |
NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm to 40 mm |
|
DIN 2284-2 |
Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm |
|
DIN 2284-3 |
Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm in precision engineering |
|
DIN 2285-1 |
General-purpose GO screwring gauges for ISO metric screw threads from 1 mm up to 200 mm nominal diameter |
|
DIN 2285-2 |
GO screw ring gauges for ISO metric screw threads over 50 mm to 200 mm nominal diameter for use in precision engineering |
|
DIN 2481 |
Thermal Power Plants; Graphical Symbols |
|
DIN 25409-8 |
Remote handling devices for use behind shielding walls; Power manipulators, Operating elements; Arrangement and marking |
|
DIN 28187 |
Tubular heat exchangers; connections tube to tube sheet |
|
DIN 32877 |
Optoelectronic measurement of form, profile and distances |
|
DIN 40431-2 |
Steel Conduit Thread; Thread Gauges, |
|
DIN 4312 |
Industrial-type turbines; steam turbines and gas expansion turbines; construction principles for industrial-type turbines |
|
DIN 4340 |
Gas Turbines; Definitions, Designations |
|
DIN 43735 |
Measurement and control; electrical temperature sensors; Sensor units for thermocouple thermometers |
|
DIN 43764 |
Measurement and control; electrical temperature sensors; straight thermometers with interchangeable sensor units |
|
DIN 43765 |
Measurement and control; electrical temperature sensors; threaded-stem thermometers with G 1/2 mounting thread |
|
DIN 43766 |
Measurement and control; electrical temperature sensors; threaded-stem thermometers with G 1 mounting thread |
|
DIN 43767 |
Measurement and control; electrical temperature sensors; welded-stem thermometers |
|
DIN 43769 |
Measurement and control; electrical temperature sensors; thermometers not fitted with protecting tubes |
|
DIN 43790 |
Basic principles for the design of line scales and pointers |
|
DIN 43801-1 |
Electrical measuring instruments; spiral springs; dimensions |
|
DIN 43802-2 |
Line scales and pointers for indicating electrical measuring instruments; general requirements |
|
DIN 43802-3 |
Line scales and pointers for indicating electrical measuring instruments; designs and dimensions |
|
DIN 43802-4 |
Line scales and pointers for indicating electrical measuring instruments; scale graduation and numbering |
|
DIN 45635 Beiblatt 1 |
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Test report (test record) form for enveloping surface method |
|
DIN 45635-1 |
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; basic method, divided into 3 grades of accuracy |
|
DIN 45635-14 |
Noise Measurement on Machines; Airborne Noise Measurement, Enveloping Surface Method, Air-cooled Heat Exchangers (Air Coolers) |
|
DIN 45635-15 |
Measurement of airborne noise emitted by machines; enveloping surface method; turbogenerator sets for use in thermal power stations |
|
DIN 45635-16 |
Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method, Machine Tools |
|
DIN 45635-1601 |
Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine, Tools Special, Stipulations for Lathes |
|
DIN 45635-1602 |
Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine Tools; Special Stipulations for Drop Forging Hammers |
|
DIN 45635-1603 |
Measurements of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine Tools; Special Stipulations for Universal Presses |
|
DIN 45635-1653 |
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for double end shaping machines |
|
DIN 45635-1654 |
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for multistage edge lipping and banding machines |
|
DIN 45635-1655 |
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for final trimming machines and edge lipping and banding machines |
|
DIN 45635-1656 |
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for two-side and multi-side planing and milling machine |
|
DIN 45635-22 |
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; flares |
|
DIN 45635-35 |
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; heat pump units with electrically driven compressors |
|
DIN 45635-41 |
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies |
|
DIN 45635-41 Beiblatt 1 |
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies (test report specimen form) |
|
DIN 45635-46 |
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; cooling towers |
|
DIN 45635-47 |
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; chimneys |
|
DIN 45635-50 |
Measurement of noise emitted by machines; airborne noise measurement, enveloping surface method; valves |
|
DIN 45635-56 |
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method and in-duct method; fan-assisted warm air generators, fan-assisted air heaters and fan units of air handling devices |
|
DIN 45635-57 |
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; outboard motors |
|
DIN 45643-1 |
Measurement and assessment of aircraft noise; quantities and parameters |
|
DIN 45643-2 |
Measurement and assessment of aircraft noise; aircraft noise monitoring systems within the meaning of article 19a of the Luftverkehrsgesetz (Civil Aviation Law) |
|
DIN 45643-3 |
Measurement and assessment of aircraft noise; determination of rating level of aircraft noise exposure |
|
DIN 45645-1 |
Determining noise rating levels from measured data - Part 1: Environmental noise |
|
DIN 45657 |
Sound level meters - Additional requirements for special measuring tasks |
|
DIN 4754 |
Heat transfer installations working with organic heat transfer fluids - Safety requirements, test |
|
DIN 4757-2 |
Solar heating plants operating on organic heat transfer media; Requirements relating to safe design and construction |
|
DIN 4760 |
Form deviations; Concepts; Classification system |
|
DIN 4764 |
Surfaces of components used in mechanical engineering and light engineering; Terminology according to stress conditions |
|
DIN 4787-1 |
Atomizing oil burners; Concepts, safety requirements, testing, marking |
|
DIN 4788-1 |
Gas Burners; Gas Burners without Blowers |
|
DIN 50010-1 |
Climates and Their Technical Application; Climatic Concepts; General Climatic Concepts |
|
DIN 50100 |
Testing of Materials; Continuous Vibration Test; Definitions, Symbols, Procedure, Evaluation |
|
DIN 50933 |
Measurement of coating thickness by differential measurement using a stylus instrument |
|
DIN 50986 |
Measurement of coating thickness; Wedge cut method for measuring the thickness of paints and related coatings |
|
DIN 50990 |
Determination of mass per unit area of metallic coatings by flame atomic absorption spectrometry |
|
DIN 51200 |
Materials testing machines; design and application of test piece holding devices in hardness testing machines |
|
DIN 51220 |
General requirements for materials testing machines, including verification and calibration |
|
DIN 51230 |
Material Testing Machines; Dynstat Apparatus for the Determination of Bending Strength and Impact Strength of Small Specimens |
|
DIN 51562-1 |
Viscometry - Determination of kinematic viscosity using the Ubbelohde viscometer - Apparatus and measurement procedure |
|
DIN 51562-2 |
Viscometry; determination of kinematic viscosity using the Ubbelohde microviscometer |
|
DIN 51562-3 |
Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times |
|
DIN 51562-4 |
Viscometry - Determination of kinematic viscosity using the Ubbelohde viscometer - Calibration of viscometers and determination of uncertainty of measurement |
|
DIN 51866-1 |
Survey of methods of measuring temperature by laser spectroscopy |
|
DIN 53018-1 |
Viscometry; Measurement of the Dynamic Viscosity of Newtonian Fluids with Rotational Viscometers; Principles |
|
DIN 53018-2 |
Viscometry; Measurement of the Dynamic Viscosity of Newtonian Fluids with Rotational Viscometers; Sources of Errors and Corrections concerning Cylinder; Rotation Viscometers |
|
DIN 53803-3 |
Sampling; statistical principles of sampling with cross classification according to two equal-ranked criteria |
|
DIN 53803-4 |
Sampling; statistical principles of sampling with cross classification according to two hierarchical criteria |
|
DIN 54112 |
Non-destructive Testing; Films, Exposure Screens, Cassettes for X-ray and Gamma Ray Radiographs; Dimensions |
|
DIN 54136-1 |
Non-destructive testing; magnetic leakage flux testing by scanning with probes; principles |
|
DIN 54140-3 |
Non-destructive testing; electromagnetic methods; representation and general characteristics of test coil assemblies |
|
DIN 55987 |
Testing of pigments; determination of hiding power value of pigmented media; colorimetric method |
|
DIN 6164-1 |
DIN colour chart; system based on the 2° standard colorimetric observer |
|
DIN 6164-2 |
DIN colour chart; specification of colour samples |
|
DIN 6164-3 |
DIN colour chart; system based on the 10° standard colorimetric observer |
|
DIN 6281 |
Generator Sets with Reciprocating Internal Combustion Engines; Connection Dimensions for Generators and Reciprocating Internal Combustion Engines |
|
DIN 6403 |
Measuring Tapes of Steel with Winder Frames or Winder Cases |
|
DIN 66118 |
Particle size analysis; size analysis by air classification; fundamentals |
|
DIN 66142-2 |
Representing and characterizing the separation of disperse materials; Application to analytical separation processes |
|
DIN 66142-3 |
Representing and characterizing the separation of disperse materials; Selection and determination of parameters for industrial separation processes |
|
DIN 7150-2 |
ISO Systems of Limits and Fits; Testing of Workpiece Elements with Cylindrical and Parallel Mating Surfaces |
|
DIN 7163 |
Workshop Gap Gauges and Check Gauges for ISO Fit Sizes from 1 to 500 mm Nominal Dimension; Gauge Dimensions and Manufacturing Tolerances |
|
DIN 7164 |
Workshop Plug Gauges and Spherical End Measuring Rods for ISO Fit Dimensions from 1 to 500 mm Nominal Dimensions; Gauge Dimensions and Manufacturing Tolerances |
|
DIN 8236-1 |
Chronometric Terms; Indication, Rate |
|
DIN 8236-2 |
Chronometric Terms; Frequency, Period |
|
DIN 8236-3 |
Chronometric Terms; Coefficients of the Rate |
|
DIN 862 |
Vernier callipers; requirements and testing |
|
DIN 863-2 |
Micrometers - Fixed micrometers and depth micrometers - Concepts, requirements and testing |
|
DIN 863-3 |
Micrometers - Special design external micrometers - Designs, requirements and testing |
|
DIN 874-1 |
Straightedges - Part 1: Steel straight edges - Dimensions and technical delivery conditions |
|
DIN 874-2 |
Straightedges - Part 2: Knife-edge straightedges - Dimensions and technical delivery conditions |
|
DIN 879-1 |
Precision dial indicators - Analogue indicators |
|
DIN 879-3 |
Precision dial indicators - Analogue indicators with electrical limit contacts |
|
DIN EN 12543-4 |
Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method |
|
DIN EN 12645 |
Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing |
|
DIN EN 13184 |
Non-destructive testing - Leak test - Pressure change method; English version of DIN EN 13184 |
|
DIN EN 1330-9 |
Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing; Trilingual version EN 1330-9:2000 |
|
DIN EN 1434-3 |
Heat meters - Part 3: Data exchange and interfaces; German version EN 1434-3:1997 |
|
DIN EN 1679-1 |
Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines; German version EN 1679-1:1997 |
|
DIN EN 583-2 |
Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting; English version of DIN EN 583-2 |
|
DIN EN 837-1 |
Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing |
|
DIN EN ISO 1 |
Geometrical product specifications (GPS) - Standard reference temperature for geometrical product specifications and verification (ISO 1:2002) |
|
DIN EN ISO 10534-2 |
Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 2: Transfer-function method (ISO 10534-2:1998); English version of DIN EN ISO 10534-2 |
|
DIN EN ISO 11546-2 |
Determination of sound insulation performance of enclosures - Measurements in situ (for acceptance and verification purposes) (ISO 11 546-2:1995) |
|
DIN EN ISO 12718 |
(DRAFT) Non-destructive testing - Terminology - Terms used in eddy current testing (ISO/DIS 12718:2006); Trilingual version prEN ISO 12718:2006 |
|
DIN EN ISO 13565-1 |
GPS - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996) |
|
DIN EN ISO 13565-2 |
GPS - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio (ISO 13565-2:1996) |
|
DIN EN ISO 13565-3 |
GPS - Surface texture: Profile method - Surfaces having stratified functional properties; Part 3: Height characterization using the material probability curve (ISO 13565-3:1998); English version of DIN EN ISO 13565-3 |
|
DIN EN ISO 2064 |
Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996); English version of DIN EN ISO 2064 |
|
DIN EN ISO 3274 |
GPS - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996) |
|
DIN EN ISO 6507-2 |
Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2005) |
|
DIN EN ISO 6507-3 |
Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2005) |
|
DIN EN ISO 6508-3 |
Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-3:2005) |
|
DIN EN ISO 7779 |
Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:1999) |
|
DIN EN ISO 7779/A1 |
Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment; Amendment A1: Noise measurement specification for CD/DVD-ROM drives (ISO 7779:1999/A1:2003) |
|
DIN EN ISO 8178-6 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test (ISO 8178-6:2000); English version of DIN EN ISO 8178-6:2001 |
|
DIN EN ISO 9934-1 |
Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2001); English version of DIN EN ISO 9934-1 |
|
DIN EN ISO/IEC 17020 |
General criteria for the operation of various types of bodies performing inspection (ISO/IEC 17020:1998); German and English version EN ISO/IEC 17020:2004 |
|
DIN IEC 60050-394 |
(DRAFT) International Electrotechnical Vocabulary - Part 394: Nuclear instrumentation: Instruments (IEC 1/1939/CDV:2004) |
|
DIN IEC 60318-4 |
(DRAFT) Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts (IEC 29/620/CD:2006) |
|
DIN IEC 61453 |
(DRAFT) Nuclear Instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and routine tests (IEC 45/616/CDV:2006) |
|
DIN ISO 10110-1 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 1: General (ISO 10110-1:1996) |
|
DIN ISO 10110-10 |
Optics and photonics - Preparation of drawings for optical elements and systems - Part 10: Table representing data of optical elements and cemented assemblies (ISO 10110-10:2004) |
|
DIN ISO 10110-11 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 11: Non-toleranced data (ISO 10110-11:1996) |
|
DIN ISO 10110-12 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 12: Aspheric surfaces (ISO 10110-12:1997) |
|
DIN ISO 10110-14 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance (ISO 10110-14:2003) |
|
DIN ISO 10110-17 |
Optics and photonics - Preparation of drawings for optical elements and systems - Part 17: Laser irradiation damage threshold (ISO 10110-17:2004) |
|
DIN ISO 10110-2 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 2: Material imperfections - Stress birefringence (ISO 10110-2:1996) |
|
DIN ISO 10110-3 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 3: Material imperfections; Bubbles and inclusions (ISO 10110-3:1996) |
|
DIN ISO 10110-4 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 4: Material imperfections; Inhomogenity and striae (ISO 10110-4:1997) |
|
DIN ISO 10110-5 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances (ISO 10110-5:1996, including Technical Corrigendum 1:1996) |
|
DIN ISO 10110-6 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances (ISO 10110-6:1996) |
|
DIN ISO 10110-7 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 7: Surface imperfection tolerances (ISO 10110-7:1996) |
|
DIN ISO 10110-8 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 8: Surface texture (ISO 10110-8:1997) |
|
DIN ISO 10110-9 |
Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating (ISO 10110-9:1996) |
|
DIN ISO 13373-1 |
Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 1: General procedures (ISO 13373-1:2002) |
|
DIN ISO 13373-2 |
Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data (ISO 13373-2:2005) |
|
DIN ISO 3310-1 |
Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth (ISO 3310-1:2000) |
|
DIN ISO 362 |
Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method (ISO 362:1998) |
|
DIN ISO 4783-1 |
Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations - Part 1: Generalities (ISO 4783-1:1989) |
|
DIN ISO 5725-1 |
Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994) |
|
DIN ISO 5725-4 |
Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method (ISO 5725-4:1994) |
|
DIN ISO 5725-5 |
Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998) |
|
DIN ISO 5725-5 Berichtigung 1 |
Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998), Corrigenda to DIN ISO 5725-5:2002-11 (ISO 5725-5:1998/Cor. 1:2005) |
|
DIN ISO 5725-6 |
Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values (ISO 5725-6:1994 including Technical Corrigendum 1:2001) |
|
DIN ISO 7919-1 |
Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 1: General guidelines (ISO 7919-1:1996) |
|
DIN ISO 7919-2 |
Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min (ISO 7919-2:2001) |
|
DIN ISO 7919-3 |
Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 3: Coupled industrial machines (ISO 7919-3:1996) |
|
DIN ISO 7919-5 |
Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 5: Machine sets in hydraulic power generating and pumping plants (ISO 7919-5:2005) |
|
DIN ISO 9044 |
Industrial woven wire cloth - Technical requirements and testing (ISO 9044:1999) |
|
DIN ISO 9334 |
Optics and optical instruments - Optical transfer function - Definitions and mathematical relationships (ISO 9334:1995) |
|
DIN 878 |
Geometrical product specifications (GPS) - Mechanical dial gauges - Limits for metrological characteristics |
|
DIN EN 10049 |
Measurement of roughness average Ra and peak count RPc on metallic flat products |
|
DIN EN 10090 |
Valve steels and alloys for internal combustion engines |
|
DIN EN 1010-1 |
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
|
DIN EN 1010-2 |
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
|
DIN EN 1010-3 |
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines |
|
DIN EN 1010-4 |
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines |
|
DIN EN 10318 |
Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method |
|
DIN EN 1048 |
Heat exchangers - Air cooled liquid coolers ('dry coolers') - Test procedure for establishing the performance |
|
DIN EN 12067-1 |
Gas/air controls for gas burners and gas burning appliances - Part 1: Pneumatic types |
|
DIN EN 12067-1/A1 |
Gas/air ratio controls for gas burners and gas buring appliances - Part 1: Pneumatic types; Amendment A1 |
|
DIN EN 12067-2 |
Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types |