DIN 7603

Ring seals and gaskets

DIN 3901

Stud fittings with type A stud end as in DIN 3852

DIN 3861

Compression rings for use with compression couplings

DIN EN 10305-1

Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes

DIN EN 10305-2

Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes

DIN EN 1092-1

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories - Part 1: Steel flanges, PN designated

DIN 2605-1

Steel butt-welding pipe fittings; elbows and bends with reduced pressure factor

DIN 3870

Coupling nuts (LL series) for use with compression couplings

DIN 73378

Polyamide tubing for use in motor vehicles

DIN EN 854

Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification

DIN ISO 1219-1

(DRAFT) Fluid power systems and components - Graphic symbols and circuit diagrams - Part 1: Graphic symbols for conventional use and data processing applications (ISO/DIS 1219-1:2004)

DIN 1615

Welded circular unalloyed steel tubes not subject to special requirements; technical delivery conditions

DIN 2501-1

Flanges; Connecting Dimensions

DIN 2353

Compression fittings and couplings

DIN 3852-1

Ports and stud ends with metric fine pitch thread, for use with compression couplings, valves and screw plugs; Dimensions

DIN EN 10216-2

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties

DIN EN 10305-3

Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes

DIN EN 857

Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification; German version EN 857:1996

DIN 2528

Steel flanges; technical delivery conditions

DIN 2605-2

Steel butt-welding pipe fittings - Part 2: Elbows and bends for use at full service pressure

DIN 3230-5

Technical delivery conditions; valves for gas installations and gas pipelines; requirements and testing

DIN 3230-6

Technical delivery conditions for valves; requirements and methods of test for valves for use with flammable liquids

DIN 3852-2

Stud ends and tapped holes with pipe thread, for use with compression couplings, valves and screw plugs; Dimensions

DIN 475-1

Widths across flats for bolts, screws, valves and fittings

DIN 74324-1

Polyamide tubing for air braking systems - Requirements and testing

DIN ISO 12151-3

Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends (ISO 12151-3:1999)

DIN ISO 6162-1

Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002 + Cor. 1:2004)

DIN 16963-11

Pipe fittings and joint assemblies for pressure pipes made from types PE 80 and PE 100 polyethylene - Dimensions of bushings, flanges and sealing elements, for socket welding

DIN 16963-14

Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions

DIN 3352-1

Gate Valves; General Information

DIN 3357-1

Metal ball valves; general requirements and methods of test

DIN 3357-5

Reduced bore nonferrous metal ball valves

DIN 3535-5

Rubber/cork and rubber/cork synthetic fibre based gasket materials for use with gas valves, gas appliances and gas pipework

DIN 8075

Polyethylene (PE) pipes - General quality requirements and testing

DIN EN 10217-1

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

DIN EN 10305-5

Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold size square and rectangular tubes

DIN ISO 3320

Fluid power systems and components - Cylinder bores and piston rod diameter - Metric series (ISO 3320:1987)

DIN ISO 6162-2

Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350) to 40 MPa (400 bar), DN 13 to DN 51 (ISO 6162-2:2002)

DIN 16962-12

Pipe fittings and joint assemblies for polypropylene pressure pipes - Dimensions of bushings, flanges and sealing elements, for socket welding

DIN 16963-1

Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends of Segmental Construction for Butt-welding, Dimensions

DIN 16963-10

Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions

DIN 16963-13

Pipe Joints and Elements for High Pressure Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions

DIN 16963-15

Pipe joint assemblies and fittings for high-density polyethylene (HDPE) pressure pipes; pipe couplings; dimensions

DIN 16963-2

Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions

DIN 16963-3

Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends for Butt-welding, Dimensions

DIN 16963-4

Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions

DIN 16963-5

Pipe fittings and joints and assemblies for PE 80 and PE 100 polyethylene pressure pipes - Part 5: General quality requirements and testing

DIN 16963-6

Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; injection-moulded fittings for butt welding; dimensions

DIN 16963-7

Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; fittings for resistance welding; dimensions

DIN 16963-8

Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions

DIN 16963-9

Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions

DIN 16965-1

Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type A pipes, dimensions

DIN 16965-2

Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type B pipes, dimensions

DIN 16965-4

Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type D pipes, dimensions

DIN 16965-5

Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type E pipes, dimensions

DIN 19560-10

Polypropylene (PP) pipes and fittings for hot water resistant waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation

DIN 19658-3

Polyethylene (PE) coiling pipes and hoses for use in irrigation systems; hoses of nonrigid material with woven fabric inner layer; dimensions and technical delivery conditions

DIN 2404

Identification Colour Code for Heating System Pipelines

DIN 2410-3

Pipes; Survey of Standards for Pipes from Concrete, Reinforced Concrete and Prestressed Concrete

DIN 24163-1

Fans; performance testing, standard characteristics

DIN 24163-2

Fans; performance testing, standardized test airways

DIN 24163-3

Fans; performance testing of small fans using standardized test airways

DIN 24166

Fans; technical delivery conditions

DIN 2445-1

Seamless steel tubes subjected to dynamic loading - Part 1: Hot finished tubes for use in fluid power systems, rated for pressures from 100 bar to 500 bar

DIN 2500

Flanges; General Information, Survey

DIN 2512

Tongue and Grooves for PN 160 flanges and gaskets for PN 10 to PN 160 flanges - Dimensions

DIN 2609

Steel butt-welding pipe fittings; technical delivery conditions

DIN 2615-1

Steel butt-welding pipes fittings; tees with reduced pressure factor

DIN 2616-1

Steel butt-welding pipe fittings; eccentric reducers with reduced pressure factor

DIN 2616-2

Steel butt-welding pipe fittings; reducers for use at full service pressure

DIN 2627

Welding Neck Flanges, Nominal Pressure 400

DIN 2628

Welding Neck Flanges; Nominal Pressure 250

DIN 2629

Welding Neck Flanges; Nominal Pressure 320

DIN 28117

PN 10 to PN 40 loose flanges in process engineering applications

DIN 2916

Bending Radii for Seamless and Welded Steel Tubes; Design Sheet

DIN 30675-1

External corrosion protection of buried pipes; corrosion protection systems for steel pipes

DIN 30675-2

External corrosion protection of buried pipes; corrosion protection systems for ductile iron pipes

DIN 30677-1

Corrosion protection of burried valves; coating for normal requirement

DIN 30677-2

External corrosion protection of buried valves; heavy-duty thermoset plastics coatings

DIN 3202-4

Face-to-face and centre-to-face dimensions of valves; Valves with female thread connection

DIN 3202-5

Face-to-face and centre-to-face dimensions of valves; valves for connection with compression couplings

DIN 3356-1

Globe valves; General data

DIN 3357-4

Full bore nonferrous metal ball valves

DIN 3543-1

Metal tapping valves; requirements, testing

DIN 3543-4

High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions

DIN 3853

Compression ends for coupling nuts

DIN 4262-3

Concrete drainage pipes and multipurpose pipes for highway and civil engineering purposes; requirements and testing

DIN 45635-38

Measurement of noise emitted by machines; airborne noise emission; enveloping surface method, reverberation room method and in-duct method; fans

DIN 477-1

Gas cylinder valves rated for test pressures up to 300 bar; types, sizes and outlets

DIN 477-5

Gas cylinder valves - Part 5: Outlets for valves rated for pressure up to 450 bar

DIN 7631

Compression couplings with spherical liner; straight compression couplings

DIN 8061

Unplasticized polyvinyl chloride pipes - General quality requirements and testing

DIN 8062

Unplasticized polyvinyl chloride (PVC-U, PVC-HI) pipes; dimensions

DIN 8063-1

Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of socket bends

DIN 8063-11

Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Sockets with Primary Element of Copper-Zinc-Alloy (Brass) for Bonding; Dimensions

DIN 8063-12

Pipe joint assemblies and fittings of unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of flanged and socket fittings

DIN 8063-2

Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Bends Made by Injection Moulding for Bonding; Dimensions

DIN 8063-3

Pipe joints assemblies and fittings for unplasticized polyvinyl chloride (PVC U) pressure pipes- Part 3: Dimensions of screwed pipe joint assemblies

DIN 8063-4

Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (PVC-U) pressure pipes; bushings, flanges, seals; dimensions

DIN 8063-5

Pipe fittings and joint assemblies for unplasticized polyvinyl chloride) (PVC-U) pressure pipes - Part 5: General quality requirements and testing

DIN 8541-2

Hoses for welding, cutting and allied processes; hoses with protective cover for use with fuel gas, oxygen and other non-combustible gases

DIN EN 10216-1

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties

DIN EN 10217-2

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties

DIN EN 10220

Seamless and welded steel tubes - Dimensions and masses per unit length

DIN EN 10305-4

Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems

DIN EN 1092-2

Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges

DIN EN 1626

Cryogenic vessels - Valves for cryogenic service

DIN EN 1680

Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997

DIN EN 1916

Concrete pipes and fittings, unreinforced, steel fibre and reinforced

DIN EN 558-1

Face-to-face and centre-to-face dimensions of metal industrial valves for use in flanged pipe systems - PN designated valves

DIN EN 639

Requirements for concrete pressure pipes including joints and fittings

DIN EN 640

Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings

DIN EN 641

Reinforced concrete pressure pipes, cylinder type, including joints and fittings

DIN EN 642

Prestressed concrete presssure pipes, cylinder and non-cylinder types, including joints, fittings and specific requirements for prestressing steel for pipes

DIN EN 764-3

Pressure equipment - Part 3: Definition of parties involved

DIN EN ISO 1127

Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992); German version EN ISO 1127:1996

DIN EN ISO 4672

Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997)

DIN ISO 12151-2

Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003)

DIN 16450

Nomenclature and symbols for fittings for use with unplasticized polyvinyl chloride (PVC-U) pressure pipes

DIN 16831-1

Pipe fittings and joint assemblies for polybute pressure pipes - Type PB 125 - Part 1: Dimensions of injection-moulded elbows for socket welding

DIN 16831-3

Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 3: Dimensions of injection-moulded sockets and caps for socket welding

DIN 16831-4

Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 4: Dimensions of injection-moulded reducers for socket welding

DIN 16831-5

Pipe fittings and joint assemblies for type PB 125 polybutene pressure pipes - Part 5: General quality requirements and testing

DIN 16831-7

Pipe fittinings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 7: Dimensions of bushings, flanges and sealing elements for socket welding

DIN 16867

Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines; Technical delivery conditions

DIN 16868-1

Wound and filled glass fibre reinforced polyester resin pipes - Dimensions

DIN 16869-1

Centrifugally cast and filled glass fibre reinforced polyester resin pipes - Dimensions

DIN 16870-1

Wound glass fibre reinforced epoxy resin pipes; dimensions

DIN 16871

Centrifugally cast glass fibre reinforced epoxy resin (EP-GF) pipes; Dimensions

DIN 16887

Determination of the long-term hydrostatic pressure resistance of thermoplastics pipes

DIN 16888-1

Determination of chemical resistance of thermoplastics pipes; polyolefin pipes

DIN 16888-2

Determination of chemical resistance of thermoplastics pipes; unplasticized polyvinyl chloride (PVC-U) pipes

DIN 16889-1

Determination of the chemical resistance factor for thermoplastics pipes; polyolefin pipes

DIN 16892

Crosslinked high-density polyethylene (PE-X) pipes - General quality requirements and testing

DIN 16893

Crosslinked high-density polyethylene (PE-X) pipes - Dimensions

DIN 16894

Crosslinked medium density polyethylene (PE-MDX) pipes - General quality requirements and testing

DIN 16895

Crosslinked medium density polyethylene (PE-MDX) pipes - Dimensions

DIN 16928

Pipes of Thermoplastic Materials; Pipe Joints, Elements for Pipes, Laying; General Directions

DIN 16961-1

Thermoplastic pipes and fittings with profiled outer and smooth inner surfaces - Dimensions

DIN 16961-2

Thermoplastics pipes and fittings with profiled outer and smooth inner surfaces - Technical delivery conditions

DIN 16962-1

Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends of Segmental Construction for Butt-welding, Dimensions

DIN 16962-10

Pipe joint assemblies and fittings for types 1 to 3 polypropylene (PP) pressure pipes; injection-moulded fittings for butt welding; dimensions

DIN 16962-11

Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions

DIN 16962-13

Pipe joint assemblies and fittings for type 1 and type 2 polypropylene (PP) pressure pipes; pipe couplings; dimensions

DIN 16962-2

Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions

DIN 16962-3

Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends Formed from Pipe for Butt-welding, Dimensions

DIN 16962-4

Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions

DIN 16962-5

Pipe fittings and joint assemblies for polypropylene (PP) pressure pipes - Part 5: General quality requirements and testing

DIN 16962-6

Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions

DIN 16962-7

Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions

DIN 16962-8

Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions

DIN 16964

Wound glass fibre reinforced polyester resins (UP-GF) pipes; general quality requirements and testing

DIN 16966-1

Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; fittings; general quality requirements and testing

DIN 16966-2

Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Elbows, Dimensions

DIN 16966-4

Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions

DIN 16966-5

Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions

DIN 16966-6

Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; collars, flanges, joint rings, dimensions

DIN 16966-7

Glass fibre reinforced polyester resin (UP-GRP) pipe fittings and joint assemblies - Requirements for and testing of bushes, flanges, and flanged and laminated joints

DIN 16966-8

Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Laminated joints; Dimensions

DIN 16967-2

Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions

DIN 16968

Polybutene (PB) pipes - General quality requirements and testing

DIN 16969

Type PB 125 polybutene pipes - Dimensions

DIN 19531-10

Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for drainage systems inside buildings - Part 10: Fire behaviour, quality control and installation

DIN 19538-10

Chlorinated polyvinyl chloride (PVC-C) pipes and fittings for hot water resistant drainage systems inside buildings - Part 10: Fire behaviour, quality control and installation

DIN 19850-1

Fibre cement pipes and fittings for drains and sewers - Part 1: Dimensions of pipes, branches and bends

DIN 19850-2

Fibre cement pipes and fittings for drains and sewers - Part 2: Dimensions of joint assemblies

DIN 24189

Testing of air cleaners for internal combustion engines and compressors; test methods

DIN 24289-1

Reciprocating displacement pumps and pump units; requirements and testing

DIN 2429-1

Symbolic representation of pipework components for use on engineering drawings; basic requirements

DIN 2429-2

Symbolic representation of pipework components on engineering drawings; functional representation

DIN 2429-2 Beiblatt 1

Symbolic representation of pipework components on technical drawings; functional representation; examples for the representation of open or shut-off flow

DIN 2430-1

Piggable piping systems - Part 1: Straight pipes and elbows

DIN 2430-2

Piggable piping systems - Part 2: Pipe joints

DIN 2430-3

Piggable pigging systems - Part 3: Trial pigging (prior to commissioning)

DIN 24346

Hydraulic fluid power; hydraulic systems; general rules for application

DIN 2442

Steel Tubes of Specified Quality Suitable for Screwing; Nominal Pressure 1 to 100

DIN 2445 Beiblatt 1

Seamless steel tubes subjected to dynamic loading - Design principles

DIN 2445-2

Seamless steel tubes for subjected dynamic loading - Part 2: Precision tubes for use in fluid power systems, rated for pressures from 100 bar to 500 bar

DIN 2470-1

Steel gas pipelines for permissible working pressures up to 16 bar; pipes and fittings

DIN 2526

Flanges; Types of Contact Surfaces

DIN 2558

PN 6 oval threaded plate flanges

DIN 2615-2

Steel butt-welding pipe fittings; tees for use at full service pressure

DIN 2617

Steel butt-welding pipe fittings; caps

DIN 2638

Welding Neck Flanges; Nominal Pressure 160

DIN 2696

Lenticular ring joint gaskets for flanged joints

DIN 28090-2

Static seals for flanged connections - Part 2: In-process testing of sheet gasket materials

DIN 28090-3

Static seals for flanged connections - Part 3: Chemical resistance of sheet gasket materials

DIN 28179

Steel U-tubes for tubular heat exchangers; technical delivery conditions

DIN 28180

Seamless steel tubes for tubular heat exchangers; dimensions, dimensional deviations and materials

DIN 28403

Vacuum technology; quick release couplings; clamped type couplings

DIN 28404

Vacuum technology; flanges; dimensions

DIN 28410

Vacuum Technology; Mass Spectrometer Partial Pressure Gauges; Definitions, Characteristics, Operating Conditions

DIN 28430

Vacuum technology; rules for the measurement of steam jet vacuum pumps and steam jet compressors using steam as the working fluid

DIN 28431

Vacuum technology; acceptance specifications for liquid ring vacuum pumps

DIN 2848

Lined flanged steel pipes and flanged steel or cast iron fittings rated for pressures of (PN 10), 25 bar (PN 25) and 40 bar (PN 40)

DIN 28601

Screwed socket joints for ductile iron pipes and fittings - Assembly and components

DIN 28650

Ductile iron double socket 30° bends, flange and socket duckfoot bends, spigot and socket tees and all-spigot tees - Dimensions

DIN 2873

PN 10 and PN 25 flanged enamelled steel pipes and fittings

DIN 2874

Flanged steel pipes and flanged steel or cast iron pipes and fittings with PTFE or PFA linings - Technical delivery conditions

DIN 2875

Flanged steel pipes and fittings with hard or soft rubber linings - Technical delivery conditions

DIN 2876

Enamelled flanged steel pipes and fittings - Technical delivery conditions

DIN 2880

Cement mortar linings for cast iron pipes, steel pipes and steel fittings

DIN 30672

Tape and shrinkable materials for the corrosion protection of buried or underwater pipelines without cathodic protection for use at operating temperatures up to 50 °C

DIN 30674-2

Cement mortar coatings for ductile iron pipes; requirements and testing

DIN 30674-3

Coating of ductile cast iron pipes - Part 3: Zinc coating with protective finishing layer

DIN 30674-5

External protection of ductile cast iron pipes; polyethylene sleeving

DIN 30678

Polypropylene coatings for steel pipes

DIN 3320-1

Safety valves; safety shut-off valves; definitions, sizing, marking

DIN 3338

Multi-turn valve actuator attachment; dimensions of type C driving components

DIN 3384

Stainless steel flexible hose assemblies for gas applications - Safety requirements, testing, marking

DIN 3398-3

Pressure cut-off switches for gaseous substances; requirements and testing

DIN 3398-4

Pressure cut-off switches for liquid fuels and heat transfer oils

DIN 3399

Gas low-pressure cut-off valves; safety requirements, testing

DIN 3444

Protective caps for weld end or threaded end pipe fittings

DIN 3500

PN 10 piston type gate valves for use in drinking water supply systems

DIN 3537-1

Gas stopvalves rated for pressures up to 4 bar; requirements and acceptance testing

DIN 3544-1

High-density polyethylene (HDPE) valves; tapping valves; requirements and test

DIN 3548-1

Flanged automatic steam traps

DIN 3852-11

Stud ends and tapped holes for use with compression couplings, valves and screw plugs - Type E stud end dimensions

DIN 3865

Compression fittings and couplings - 24° cone compression ends with O-ring for ports as in DIN EN ISO 8434-1

DIN 3871

Compression couplings - Male fittings

DIN 3900

Compression couplings (LL series) with tapered stud end

DIN 3903

Taper stud elbows fo use with compression couplings (not to be used for new designs)

DIN 3904

Olive type compression couplings; male stud elbows

DIN 3906

Taper stud tees (stud branch) for use with compression couplings (not to be used for new designs)

DIN 3907

Olive type compression couplings; male stud tees (stud branch)

DIN 3913

Taper stud tees (stud run) for use with compression couplings (not to be used for new designs)

DIN 3914

Olive type compression couplings; male stud tees (stud run)

DIN 3942

Compression fittings and couplings - Swivel elbows with 24° cone compression end and O-ring anf with port as in DIN EN ISO 8434-1

DIN 3943

Compression fittings and couplings - Swivel branch tees with 24° cone compression end O-ring and with port as in DIN EN ISO 8434-1

DIN 3944

Compression fittings and couplings - Swivel run tees with 24° cone compression end and O-ring and with port as in DIN EN ISI 8434-1

DIN 3945

Compression fittings and couplings - Swivel adaptors with 24° cone compression end and O-ring for ports as in DIN EN ISO 8434-1

DIN 3946

Compression fittings and couplings - Reducing swivel adaptors with 24° cone compression end and O-ring and with port as in DIN EN ISO 8434-1

DIN 3955

Swivel adaptors with type A stud end as in DIN 3852

DIN 4060

Pipe joint assemblies with elastomeric seals for use in drains and sewers - Requirements and testing

DIN 4119-1

Above-ground Cylindrical Flat-bottomed Tank Installations of Metallic Materials; Fundamentals, Design, Tests

DIN 4119-2

Above-ground cylindrical flat-bottom tank structures of metallic materials; Calculation

DIN 42565

Power Transformers; Fans, Blade Diameter 350 mm, for Open-air Installation

DIN 45635-41

Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies

DIN 45635-41 Beiblatt 1

Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies (test report specimen form)

DIN 45635-50

Measurement of noise emitted by machines; airborne noise measurement, enveloping surface method; valves

DIN 45635-56

Measurement of noise emitted by machines; airborne noise emission; enveloping surface method and in-duct method; fan-assisted warm air generators, fan-assisted air heaters and fan units of air handling devices

DIN 4680-1

Stationary, above ground, steel pressure vessels for the storage of liquefied petroleum gas; dimensions and mountings

DIN 4680-2

Stationary, partially sunk, steel pressure vessels for the storage of liquefied petroleum gas; dimensions and mountings

DIN 4810

Steel pressure vessels for water supply systems

DIN 4925-1

Threaded unplasticized polyvinyl chloride (PVC-U) water well filter pipes and casings - DN 35 to DN 100 pipes with Whitworth pipe thread

DIN 4925-2

Threaded unplasticized polyvinyl chloride (PVC-U) water well filter pipes and casings - DN 100 to DN 200 pipes with trapezoidal thread

DIN 4925-3

Threaded unplasticized polyvinyl chloride (PVC-U) water well filter pipes and casings - DN 250 to DN 400 pipes with trapezoidal thread

DIN 4927

DN 50 to DN 200 steel flanged well tubing

DIN 4930

Pipes for use in freezing shaft sinking; dimensions and technical delivery conditions

DIN 4935-1

Stainless steel wire wrapped well screens - Part 1: Sizes DN 40 to DN 100 threaded screens with continuos slot

DIN 4935-2

Stainless steel wire wrapped well screens - Part 2: Sizes DN 100 to DN 500 threaded screens with continuous slot

DIN 4935-3

Stainless steel wire wrapped well screens - Part 3: Sizes DN 500 to DN 1000 flanged screens with continuous slot

DIN 53769-1

Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings

DIN 53769-2

Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test

DIN 53769-3

Testing of glass fibre reinforced plastics pipes; determination of initial and long-term ring stiffness

DIN 53769-6

Testing of glass fibre reinforced plastics pipes; Testing of pipes and fittings under pulsating internal pressure

DIN 54141-1

Non-destructive testing; Eddy current testing of pipes and tubes; General remarks on testing using concentric test coils and the single-frequency method

DIN 54141-2

Non-destructive testing; Eddy current testing of pipes and tubes; Reference method for the determination and calibration of the properties of an eddy current testing system using concentric test coils

DIN 54141-3

Non-destructive testing; eddy current testing of pipes and tubes; procedure

DIN 5437

Hand pumps; semirotary pumps; sizes, performance and dimensions

DIN 54815-1

Pipes made of filled polyester resin moulding materials - Dimensions, material and marking

DIN 54815-2

Pipes made of filled polyester resin moulding materials - Requirements and testing

DIN 6274

Internal combustion engines for general purposes; Compressed air containers with valve block; 38 mm bore; Assembly

DIN 6275

Internal combustion engines for general purposes; Compressed air containers for permissible working overpressures up to 30 bar

DIN 6276

Internal combustion engines for general purposes; Valve blocks for compressed air containers; 38 mm bore

DIN 6607

External corrosion protection of underground steel storage tanks; requirements and testing

DIN 6618-1

Vertical single-wall steel tanks for the above ground storage of flammable and non-flammable water polluting liquids

DIN 6618-2

Vertical double-wall steel tanks with vacuum-based leak detection system, for the above ground storage of flammable and non-flammable water polluting liquids

DIN 6618-3

Vertical double-wall steel tanks with liquid-based leak detection system, for the above ground storage of flammable and non-flammable water polluting liquids

DIN 6619-1

Vertical single-wall steel tanks for the underground storage of flammable and non-flammable water polluting liquids

DIN 6619-2

Vertical double-wall steel tanks for the underground storage of flammable and non-flammable water polluting liquids

DIN 6623-1

Vertical single-wall steel tanks with less than 1000 litre capacity, for the above ground storage of flammable and non-flammable water polluting liquids

DIN 6623-2

Vertical double-wall steel tanks with less than 1000 litre capacity, for the above ground storage of flammable and non-flammable water polluting liquids

DIN 6624-1

Horizontal single-wall steel tanks with capacities between 1000 and 5000 litres, for the above ground storage of flammable and non-flammable water polluting liquids

DIN 6624-2

Horizontal double-wall steel tanks with capacities between 1000 and 5000 litres, for the above ground storage of flammable and non-flammable water polluting liquids

DIN 6625-1

Steel tanks erected on site, for the above ground storage of hazardous flammable water polluting liquids of class A III and of non-flammable water polluting liquids; requirements and testing

DIN 6625-2

Steel tanks erected on site, for the above ground storage of hazardous flammable water polluting liquids of class A III and of non-flammable water polluting liquids; design

DIN 6626

Steel manhole shafts for the underground tanks designed for the storage of flammable and non-flammable water polluting liquids

DIN 6627

Collars for masonry manhole shafts for underground tanks designed for the storage of flammable and non-flammable water polluting liquids

DIN 7632

Compression couplings with spherical liner; reducers

DIN 7638

Compression couplings with spherical liner; equal elbows

DIN 7639

Compression couplings with spherical liner; equal tees

DIN 7640

Compression couplings with spherical liner; equal crosses

DIN 7644

Compression couplings with spherical liner; male studed banjo bolts for ring type nipples

DIN 7647

Compression couplings with spherical liner - Male stud compression couplings

DIN 8074

Polyethylene (PE) pipes - Dimensions

DIN 8076-1

Thermoplastics pressure pipelines; metal compression fittings for polyethylene (PE) pipes; general quality requirements; testing

DIN 8079

Chlorinated polyvinyl chloride (PVC-C) pipes - Dimensions

DIN 8080

Chlorinated polyvinyl chloride (PVC-C) pipes PVC-C 250 - General quality requirements and testing

DIN 85004-2

Pipelines of copper-nickel-alloys - Part 2: Basic principles for design and fabrication, testing

DIN 8541-3

Rubber oxygen hoses for welding, cutting and allied processes, with or without protective cover, designed for special requirements - Part 3: Safety requirements and testing

DIN 86042

Dummy Hole Plates (Spectacle Flanges); Mating Dimensions according to Nominal Pressure 10 and 16

DIN 8906

PN 40 flared flange solderless compression couplings for use in refrigerating systems

DIN 8912

Coupling nuts and screwed plugs for use with PN 40 flared flange solderless compression couplings in refrigerating systems

DIN 8914

90° tapered seal rings and caps for use with PN 40 flared flange solderless compression couplings in refrigerating systems

DIN EN 10216-3

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes

DIN EN 10216-4

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties

DIN EN 10216-5

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes

DIN EN 10217-7

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes