DIN EN ISO 4042

Fasteners - Electroplated coatings (ISO 4042:1999); English version of DIN EN ISO 4042

DIN EN 440

Wire electrodes and deposits for gas-shielded arc welding of non-alloy and fine-grain steels - Classification

DIN 50939

Chromating aluminium - Principles and testing

DIN EN ISO 10683

Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2000); English version of DIN EN ISO 10683

DIN EN ISO 5817

Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003 + Cor. 1:2006)

DIN EN ISO 9013

Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2002)

DIN 3124

Square Drive Socket Wrenches for Hexagon Bolts, Hand-operated

DIN 332-1

60° centre holes; types R, A, B, and C

DIN 50018

Sulfur dioxide corrosion testing in a saturated atmosphere

DIN EN 22553

Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992); German version EN 22553:1994

DIN EN ISO 6520-1

(DRAFT) Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO/DIS 6520-1:2005); Trilingual version prEN ISO 6520-1:2005

DIN 17611

Anodized wrought aluminium and aluminium alloys semi-finished products - Technical delivery conditions

DIN 2080-1

7/24 Taper Shanks for Tools and Clamping Devices, Type A

DIN EN 970

Non-destructive examination of fusion welds - Visual examination; German version EN 970:1997

DIN EN ISO 13920

General tolerances for welded constructions - Tolerances for lengths, angles, shape and position (ISO 13920:1996)

DIN 10

Driving squares for rotating tools with parallel shanks

DIN 17022-1

Heat treatment of ferrous products - Hardening and tempering

DIN 17022-4

Heat treatment of ferrous materials - Part 4: Nitriding and nitrocarburizing

DIN 2079

7/24 tapers for spindle noses for machine tools

DIN 2559-4

Weld preparation - Inside diameters of seamless stainless steel pipes

DIN 32520-1

Graphical symbols for welding; basic graphical symbols and principles

DIN 50938

Black oxide treatment of ferrous products - Requirements and testing

DIN 8000

Design Dimensions and Errors of Hobs for Involute Spur Gears; Fundamental Terms

DIN EN 1714

Non-destructive testing of welds - Ultrasonic testing of welded joints (includes Amendment A1)

DIN EN 439

Shielding gases for arc welding and cutting

DIN ISO 10897

Collets for tool holders with taper ratio 1:10 - Collets, holders, nuts (ISO 10897:1996)

DIN 1414-2

Technical delivery conditions for high-speed steel twist drills - Inspection

DIN 17014-3

Heat treatment of ferrous materials; notation to indicate heat treatment processes

DIN 17021-1

Heat Treatment of Ferrous Metals; Material Selection; Steel Selection according to Hardenability

DIN 17022-3

Heat treatment of ferrous materials; heat treatment methods; case hardening

DIN 1863

Countersinks for Countersunk Head Rivets

DIN 1868

Detachable Pilots for Counterbores and Countersinks

DIN 1880-1

Shell end mills with tenon and key drive - Dimensions

DIN 1880-2

Shell end mills with tenon and parallel key drive - Part 2: Technical delivery conditions

DIN 1912-4

Graphical Representation of Welded, Soldered and Brazed Joints; Concepts and Terms for Soldered and Brazed Joints and Seams

DIN 2245-1

GO and NOT GO plug gauges from 1 mm to 40 mm nominal diameter

DIN 28052-3

Non-metallic protective coatings for precast concrete members used in process plant units - Organic coatings

DIN 28052-4

Nonmetallic protective coatings and linings for precast concrete members used in process plant - Part 4: Linings

DIN 28052-5

Nonmetallic protective coatings and linings for precast concrete members used in process plant - Composite coating or lining systems

DIN 32520-3

Graphical symbols for welding; graphical symbols for use on arc welding equipment

DIN 32539

Flame cleaning of steel and concrete surfaces

DIN 332-4

Centre holes for rail vehicles axles

DIN 332-7

Machine tools; 60° centre holes; dimensioning

DIN 333

60° centre drills; types R, A, and B

DIN 373

Counterbores with Parallel Shank and Solid Pilot

DIN 3968

Tolerances for Single-start Hobs for Involute Spur Gears

DIN 45635-49

Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; surface treatment plants

DIN 51032

Ceramics, glass, glass ceramics, vitreous enamels; permissible limits for the release of lead and cadmium from articles intended for use in contact with foodstuffs

DIN 5156

Machine taps for G 1/16 to G 2 and Rp 1/16 to Rp 2 pipe threads

DIN 55026

Machine Tools; Spindle Noses with Centering Taper and Flange; Dimensions

DIN 55027

Machine Tools; Spindle Noses with Centering Taper, Face Plate and Bayonet Type Fastening, Accessories; Dimensions

DIN 6527

Solid hardmetal end mills with stepped parallel shank - Dimensions

DIN 65471

Aerospace; filler metals for welding titanium and titanium alloys; filler rods and filler wires; dimensions, masses

DIN 69001-14

Machine tools; Multi-spindle heads; Assemblies, Spindle seals Types A to D

DIN 69001-15

Machine tools; Multi-spindle heads; Assemblies, Tapping spindles, Type A

DIN 69001-41

Machine tools; Multi-spindle heads; Guide sleeves Type A

DIN 8002

Metal-cutting Tools; Hobs for Spur Gears, with Clutch Drive Slot or Keyway, Modules 1 to 20

DIN 802-6

Tolerances on the threaded portion of taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts according to DIN 8140 for ISO metric coarse and fine pitch threads; Manufacturing tolerances on the threaded portion

DIN 807

Lathe centres 60° with extractor nut

DIN 8524-3

Defects in Metallic Welded Joints; Cracks, Classification, Denominations, Explanatory Notes

DIN EN 12329

Corrosion protection of metals - Electrodeposited coatings of zinc with supplementary treatment on iron and steel; English version of DIN EN 12329

DIN EN 287-1

Qualification test of welders - Fusion welding - Part 1: Steels

DIN EN ISO 3834-1

Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005)

DIN EN ISO 4527

Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specifications and test methods (ISO 4527:2003)

DIN EN ISO 6988

Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985); German version EN ISO 6988:1994

DIN EN ISO 9692-1

Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2003)

DIN 1409

High-speed steel broaching tools - Technical delivery conditions

DIN 1420

Reamers; Manufacturing Tolerances and Designation

DIN 16960-1

Welding of Thermoplastics; Principles

DIN 17022-2

Heat treatment of ferrous materials; heat treatment methods; hardening and tempering of tools

DIN 17022-5

Heat treatment of ferrous materials - Part 5: Surface hardening

DIN 1737-2

Filler metals for welding titanium and titanium-palladium alloys; sample and specimen preparation, mechanical properties of all-weld metal

DIN 1809

Driving Tenons for Tools with Parallel Shank

DIN 1814

Tap Wrenches; Adjustable

DIN 1823-1

Angular Milling Cutters for Toolmaking; Dimensions

DIN 1823-2

Single-angle cutters for toolmaking; technical delivery conditions

DIN 1831-2

Inserted tooth side and face milling cutters; technical delivery consitions

DIN 1833-1

Inverse dovetail cutters and dovetail cutters with parallel shank; dimensions

DIN 1833-2

Parallel shank dovetail cutters; technical delivery conditions

DIN 1834-2

Narrow side and face milling cutters; technical delivery conditions

DIN 1835-1

Cylindrical shanks for milling cutters - Dimensions

DIN 1835-2

Cylindrical shanks for milling cutters - Part 2: Mating dimensions for chucks and accessories

DIN 1837

Circular Metal Slitting Saw Blades; Fine-toothed

DIN 1838

Circular Metal Slitting Saw Blades; Coarse-toothed

DIN 1840

Circular Metal Slitting Saw Blades; Tooth Forms, Side Clearance, Manufacturing Tolerances

DIN 1862

End Mill Reamers for Jig Boring Machines

DIN 1866

90° Countersinks with Parallel Shank and Solid Pilot

DIN 1867

90° Countersinks with Morse Taper Shank and Detachable Pilot

DIN 1889-1

Cylindrical die-sinking cutters with parallel shank

DIN 1889-3

Tapered die-sinking cutters with parallel shank

DIN 1889-5

Die-sinking cutters; technical delivery conditions

DIN 1890-2

Straight relieved tooth slotting cutters; technical delivery conditions

DIN 1891-2

Interlocking slotting cutters; technical delivery conditions

DIN 1892-2

Interlocking cylindrical cutters; technical delivery conditions

DIN 1893-2

Side and face thread milling cutters for ISO metric trapezoidal threads; technical delivery conditions

DIN 1896

Machine Reamers for Metric Tapers

DIN 1910-3

Welding; Welding of Plastics, Processes

DIN 19226 Beiblatt 1

Control technology - Index

DIN 208

Machine chucking reamers with Morse taper shanks

DIN 2082-1

Nuts for Milling Machine Arbors

DIN 2083-1

Bearing Sleeves for Milling Machine Arbors, for Milling Cutters with Longitudinal Keyway

DIN 209

Machine Reamers with Screwed-on Blades

DIN 2174

Cold-forming taps for M2 to M16 and M3 x 0,25 to M24 x 2 ISO metric threads - Dimensions

DIN 2175

High-speed steel cold-forming taps - Technical delivery conditions

DIN 2179

Machine Taper Pin Reamers with Parallel Shanks

DIN 2180

Machine Taper Pin Reamers with Morse Taper Shanks

DIN 2181

Screwing taps in sets of 2 taps for M1 × 0,2 to M52 × 4 ISO metric srew threads; Dimensions

DIN 2184-1

Screwing taps and cold forming taps - Part 1: Basic dimensions of long shank taps

DIN 2184-2

Screwing taps and cold forming taps - Part 2: Basic dimensions of short shank taps

DIN 2189

Cold-forming taps for G 1/16 to G 1 pipe threads - Dimensions

DIN 2197

High-speed steel taps with ground threads - Technical delivery conditions

DIN 2245-2

GO and NOT GO plug gauges over 40 mm up to 65 mm nominal diameter

DIN 2246-1

GO plug gauges from 1 mm to 40 mm nominal diameter

DIN 2246-2

GO segmental cylindrical bar gauges over 120 mm up to 200 mm nominal diameter

DIN 2246-3

GO plug gauges over 40 mm up to 120 mm nominal diameter

DIN 2246-4

GO plug gauges over 40 mm up to 250 mm nominal diameter for use in precision engineering

DIN 2247-1

NOT GO plug gauges from 1 mm to 40 mm nominal diameter

DIN 2247-2

NOT GO rod gauges over 40 mm up to 500 mm nominal diameter

DIN 2247-3

NOT GO plug gauges with cylindrical gauging member over 40 mm up to 120 mm nominal diameter

DIN 2247-4

NOT GO segmental cylindrical bar gauges over 120 mm up to 200 mm nominal diameter

DIN 2247-5

NOT GO plug gauges with cylindrical gauging member over 40 mm up to 250 mm nominal diameter, for use in precision engineering

DIN 2248-1

GO gauging members with nominal diameters from 1 mm to 40 mm

DIN 2248-2

GO gauging members over 40 mm up to 120 mm nominal diameter

DIN 2248-3

GO segmental cylindrical bar gauging members over 120 mm up to 200 mm nominal diameter

DIN 2248-4

GO gauging members over 40 mm up to 250 mm nominal diameter for use in precision engineering

DIN 2249-1

NOT GO gauging members with nominal diameters from 1 mm to 40 mm

DIN 2249-2

NOT GO gauging members with spherical ends over 40 mm up to 500 mm nominal diameter

DIN 2249-3

NOT GO segmental cylindrical bar gauging members over 120 mm up to 200 mm nominal diameter

DIN 2249-4

NOT GO cylindrical gauging members over 40 mm up to 120 mm nominal diameter

DIN 2249-5

NOT GO cylindrical gauging members over 40 mm up to 250 mm nominal diameter for use in precision engineering

DIN 2311-1

Specification and approval of laser beam surface treatment using additional materials - Part 1: Laser surface treatment specification using consumables

DIN 2328-1

End mills with 7/24 taper shanks - Dimensions

DIN 2328-2

End mills with 7/24 taper shanks - Technical delivery conditions

DIN 25409-8

Remote handling devices for use behind shielding walls; Power manipulators, Operating elements; Arrangement and marking

DIN 2559-2

Edge preparation for welding; matching of inside diameter for circumferential welds on seamless pipes

DIN 2559-3

Preparation of welds; matching of inside diameters for circumferential welds on welded pipes

DIN 28054-1

Organic coatings on metallic components for use in process engineering - Part 1: Requirements and testing

DIN 29850

Aerospace; heat treatment of wrought aluminium alloys

DIN 311

Bridge Reamers with Morse Taper Shank

DIN 317

Ejector Drifts for Taper Shanks with Flat Tang

DIN 32506-1

Testing of Solderability for Soft Soldering; Wetting tests

DIN 32506-2

Testing of solderability for soft soldering; Vertical dipping test for specimens of copper alloys; Testing; Assessment

DIN 32506-3

Testing of solderability for soft soldering; Vertical dipping test for pre-tinned specimens; Testing; Assessment

DIN 32525-4

Testing of filler metals by means of weld metal specimens; test piece for determining the hardness for surfacing

DIN 32541

Management of machines and similar technical equipment; Terminology associated with activities

DIN 327-1

Parallel shank slot drills; dimensions

DIN 327-2

Parallel shank slot drills; technical delivery conditions

DIN 336

Drills for use prior to tapping screw threads

DIN 347

Countersinks with 120° Point Angle

DIN 352

Screwing taps in sets of 3 for M1 to M68 ISO metric screw threads-Dimensions

DIN 371

Machine taps with full diameter shank for M1 to M10 and M1 × 0,2 to M10 × 1,25 ISO metric screw threads

DIN 374

Machine taps for M3 × 0,2 to M52 × 4 ISO metric screw threads

DIN 375

Counterbores with Morse Taper Shank and Detachable Pilot

DIN 376

Machine taps for M3 to M68 ISO metric screw threads

DIN 41641-1

Tools for solderless electrical connections; hand crimping tools; concepts, requirements, testing

DIN 45635-16

Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method, Machine Tools

DIN 45635-1601

Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine, Tools Special, Stipulations for Lathes

DIN 45635-1602

Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine Tools; Special Stipulations for Drop Forging Hammers

DIN 45635-1603

Measurements of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine Tools; Special Stipulations for Universal Presses

DIN 4951

Straight Cutting Tools for Lathe Work with High Speed Steel Cutting Edges

DIN 4964-1

High Speed Steel Tool Holder Bits

DIN 50315

Testing the wear and effectiveness of metallic abrasives by centrifugal blasting

DIN 50903

Metallic Coatings; Pores, Inclusions, Blisters and Cracks, Definitions

DIN 50958

Modified corrodkote test for electrodeposited coatings

DIN 50965

Electrodeposited tin coatings on ferrous and copper and copper alloy products

DIN 50978

Testing of metallic coatings; adherence of hot-dip zinc coatings

DIN 5157

Screwing taps in sets of 2 taps for G 1/16 to G 4 and Rp 1/16 to Rp 4 pipe threads

DIN 523

Lathe Mandrels; Mandrels for Workpiece-mounting

DIN 55028

Machine Tools; Mountings for Clamping Devices; Connecting Dimensions for Spindle Noses according to DIN 55026 and DIN 55027

DIN 55029

Machine Tools; Spindle Noses and Face Plates with Centering Taper; Camlock Type, Accessories; Dimensions

DIN 55058

Spindle Noses for Adjustable Adapters; Connecting Dimensions

DIN 55141

Machine tools; Vertical surface broaching machines; Sizes

DIN 55142

Machine tools; Horizontal surface broaching machines; Sizes

DIN 55143

Machine tools; Vertical internal broaching machines; Sizes

DIN 55144

Machine tools; Horizontal internal broaching machines; Sizes

DIN 55145

Machine tools; Continuously working horizontal surface, broaching machines (chain broaching machines); Sizes

DIN 55170

Open-Front Bench Type Eccentric Presses; Sizes

DIN 55181

Machine tools; straight sided single acting mechanical presses with nominal forces from 400 kN to 4000 kN; sizes

DIN 55185

Machine tools; straight sided high speed mechanical presses with nominal forces from 250 kN to 4000 kN; sizes

DIN 55220

Machine Tools; Swivel Bending Machine; Sizes

DIN 55666

Determining the equilibrium concentration of formaldehyde in a small test chamber when released from coatings, melamine foams and textiles

DIN 55802

Machine Tools; Folding Machines; Acceptance Conditions

DIN 55803

Machine Tools; Spinning and Planishing Lathes; Acceptance Conditions

DIN 6300

Jigs and Fixtures for Form-modifying Production Processes; Denominations and their Abbreviations

DIN 6346

Parallels

DIN 6348

Drilling Jigs; Quick-clamping

DIN 6350-1

Lathe Chucks, Hand-operated; Jaws not Individually Adjustable, with Cylindrical Mounting Recess

DIN 6350-2

Lathe Chucks, Hand-operated; Jaws not Individually Adjustable, Mounting recess with 1 : 4 Taper

DIN 6351-1

Lathe Chucks, Hand-operated; Jaws also Individually Adjustable with Cylindrical Mounting Recess

DIN 6351-2

Lathe Chucks, Hand-operated; Jaws also Individually Adjustable, Mounting Recess with 1 : 4 Taper

DIN 6352-1

Chuck backplates with 1 : 4 Locating Taper; Basic Flanges

DIN 6353

Lathe Chucks, Power-operated, without Trough-hole

DIN 6370

Clamping Devices; Machine Vices, Capacities, Mating Dimensions, Permissible Variations, Jaws

DIN 6379

Studs for use with T-nuts

DIN 649

T-slots for T-head bolts

DIN 6513-2

Corner rounding concave cutters; technical delivery conditions

DIN 65153

Aerospace - Acceptance testing of plasma arc welding equipment

DIN 6518-1

Corner rounding concave milling cutters with parallel shank; dimensions

DIN 6518-2

Corner rounding concave milling cutters with parallel shank; technical delivery conditions

DIN 6528

Solid hardmetal end mills with continuous parallel shank - Dimensions

DIN 6529

Parallel shank solid hardmetal end mills; technical delivery conditions

DIN 6535

Parallel shanks for hardmetal twist drills and end mills; dimensions

DIN 6537

Stepped parallel shank solid hardmetal twist drills - Dimensions

DIN 6538-1

Reinforced parallel shank twist drills with hardmetal cutting edges - Dimensions

DIN 6539

Continuous parallel shank solid hardmetal twist drills; dimensions

DIN 6540-1

Technical delivery conditions for DIN 6537 and DIN 6539 solid hardmetal twist drills - Requirements

DIN 6540-2

Technical delivery conditions for DIN 6537 and DIN 6539 solid hardmetal twist drills - Checking of dimensions

DIN 65470

Aerospace; filler metals for welding metallic materials; technical specification

DIN 65570

Aerospace; heat treatment facilities; general requirements

DIN 65582

Aerospace; heat treatment of aluminium- and magnesium-alloy castings

DIN 659

Tubular single end tee socket wrenches

DIN 6594

Drills with type A hollow taper shanks and coolant supply as in DIN 69893-1, with indexable inserts - Main dimensions

DIN 6596

Drills with type A hollow taper shanks and coolant supply as in DIN 69893-1, with indexable inserts - Designation

DIN 66312

Manipulating industrial robots - Programming language - Industrial Robot Languages (IRL)

DIN 69001-12

Machine tools; Multi-spindle heads; Assemblies, Intermediate shafts Types A to P

DIN 69001-13

Machine tools; Multi-spindle heads; Assemblies, Boring spindles Types A to D

DIN 69001-16

Machine tools; Multi-spindle heads; Assemblies, Spindle drives, Types A to F

DIN 69001-31

Machine tools; Multi-spindle heads; Driving pinions Type A

DIN 69001-32

Machine tools; Multi-spindle heads; Intermediate shafts Types A to G

DIN 69001-33

Machine tools; Multi-spindle heads; Boring spindles Types A and B

DIN 69001-34

Machine tools; Multi-spindle heads; Tapping spindles Type A

DIN 69001-35

Machine tools; Multi-spindle heads; Covers Types A and B

DIN 69001-38

Machine tools; Multi-spindle heads; Mounting rings Types A to D

DIN 69001-39

Machine tools; Multi-spindle heads; Protection rings Type A

DIN 69001-42

Machine tools; Multi-spindle heads; Drive sleeves Type A

DIN 69001-43

Machine tools; Multi-spindle heads; Pinion sleeves Types A and B

DIN 69001-45

Machine tools; Multi-spindle heads; Clamping pieces Type A

DIN 69001-46

Machine tools; Multi-spindle heads; Keys Type A

DIN 69001-48

Machine tools; Multi-spindle heads; Gauge rings Type A

DIN 69001-49

Machine tools; Multi-spindle heads; Step rings Types A and B

DIN 69001-50

Machine tools; Multi-spindle heads; Sleeves Type A

DIN 69001-51

Machine tools; Multi-spindle heads; Bearing bushes Type A

DIN 69001-52

Machine tools; Multi-spindle heads; Gears Type A

DIN 69521

Machine Tools; Modular Units; Centre Bases for Longitudinal Cycle Machines, Constructional Sizes

DIN 69524

Machine Tools; Modular Units; Support Brackets, Constructural Sizes

DIN 69718-1

Machine Tools; External Cylindrical Grinding Machines; Definitions and Terms

DIN 69718-2

Machine Tools; Surface Grinding Machines with Horizontal Grinding Spindle; Definitions and Terms

DIN 69718-3

Machine Tools; Centreless External Cylindrical Grinding Machines; Definitions and Terms

DIN 7431

Screwdrivers for Hexagon Insert Bits

DIN 7433

Adapters for Hexagon Insert Bits for Use with Spiral Ratchet Drivers

DIN 770-1

Shank Sections for Lathe and Planer Tools; Rolled and Forged Shanks

DIN 770-2

Shank Sections for Lathe and Planer Tools; Machined All Over, Not Required to Meet Special Standards of Accuracy

DIN 771

High Speed Steel Tips for Lathe and Planer Tools

DIN 8010

Carbide Tips for Drills; Point Angle 115° for Heavy Loading

DIN 8011

Carbide Tips for Reamers, Countersinks, Counterbores and End Mills

DIN 8012

Carbide Inserts for Centre Points

DIN 8013

Carbide Tips for Drills; Point Angle 85° for Light Loading

DIN 802-5

Manufacturing tolerances for the threaded portion of screwing taps - Ground taps for ISO metric threads - Interference fit threads as in DIN 8141-1

DIN 803

Machine Tools; Feeds for Machine Tools; Nominal Values, Limiting Values, Transmission Ratios

DIN 8037

Twist Drills with Parallel Shank with Carbide Tips for Drilling Metal

DIN 8038

Twist Drills with Parallel Shank with Carbide Tips for Drilling Plastics (Thermosetting Plastics)

DIN 8039

Parallel Shank Masonry Drills with Carbide Tips

DIN 804

Machine Tools; On-load Speeds for Machine Tools; Nominal Values, Limiting Values, Transmission Ratios

DIN 8041

Twist Drills with Morse Taper Shank with Carbide Tips for Drilling Metal

DIN 8047

Side Milling Cutters; Carbide-tipped

DIN 8048

Side Milling Cutters with Exchangeable Blades; Carbide-tipped

DIN 8050

Machine-reamers with parallel shanks with carbide tips, with short cutting part

DIN 806

60° lathe centres without extractor nut

DIN 8093

Machine-reamers with parallel shanks with carbide tips, with long cutting part

DIN 842-1

Single-angle milling cutters; dimensions

DIN 844-1

Parallel shank end mills; dimensions

DIN 844-2

Parallel shank end mills; technical delivery conditions

DIN 845-2

Morse taper shank end mills; technical delivery conditions

DIN 847-1

Double Equal-Angle Milling Cutters; Dimensions

DIN 847-2

Double equal-angle milling cutters; technical delivery conditions

DIN 850-2

Woodruff cutters; technical delivery conditions

DIN 851-1

T-slot cutters with parallel shanks; dimensions

DIN 851-2

T-slot cutters with Morse taper shanks; dimensions

DIN 851-3

T-slot cutters; technical delivery conditions

DIN 8519

Annular and elongated projections for resistance welding of sheet steel

DIN 852-1

Bore type thread milling cutters for ISO metric threads; dimensions

DIN 8522

Production Processes of Autogenous Engineering; Survey

DIN 852-2

Bore type thread milling cutters for ISO metric threads; technical delivery conditions

DIN 8526

Testing of Soldering Joints; Gap Soldered Joints, Shear Test, Creep Shear Test

DIN 8528-1

Weldability; Metallic Materials, Definitions

DIN 855-1

Semi-circular Profile Milling Cutters, Concave; Dimensions

DIN 855-2

Concave milling cutters; technical delivery conditions

DIN 856-1

Semi-circular Profile Milling Cutters, Convex; Dimensions

DIN 8562

Welding of Vessels; Vessels of Metallic Materials, Principles for Welding

DIN 856-2

Convex milling cutters; technical delivery conditions

DIN 857

Metal-cutting Tools; Milling Cutters, Rotation, Flute Direction, End Thrust

DIN 8605

Machine Tools; Lathes of High Accuracy Swing up to 500 mm, Turning Length up to 1500 mm, Acceptance Conditions

DIN 8606

Machine Tools; Lathes of Normal Accuracy; Swing up to 800 mm; Acceptance Conditions

DIN 8607

Machine Tools; Lathes of Normal Accuracy, Swing above 800 up to 1600 mm; Acceptance Conditions

DIN 8611-1

Machine Tools; Horizontal Single-spindle Automatic Lathes; Acceptance Conditions

DIN 8611-2

Machine Tools; Horizontal Automatic Lathes; Front-loaded; Acceptance Conditions

DIN 8615-3

Machine Tools; Milling Machines with Horizontal Spindle and Fixed Table; Acceptance Conditions

DIN 8615-4

Machine Tools; Milling Machines with Vertical Spindle and Fixed Table; Acceptance Conditions

DIN 8620-3

Machine Tools; Boring and Millung Machines with Horizontal Spindle; Table-Type Machines; Rotary Tables; Acceptance Conditions

DIN 8625-1

Machine Tools; Radial Drilling Machines with Adjustable Arm; Acceptance conditions

DIN 8626-1

Machine Tools; Vertical Drilling Machines; Box Type Drilling Machines; Acceptance Conditions

DIN 8626-2

Machine Tools; Vertical Drilling Machines; Pillar Type Drilling Machines; Acceptance Conditions

DIN 8630

Machine tools; external cylindrical grinding machines with a movable workpiece table; acceptance conditions

DIN 8632-1

Machine tools; surface grinding machines with horizontal grinding wheel spindle and rectangular reciprocating table; acceptance conditions

DIN 8632-3

Machine Tools; Surface Grinding Machines with Horizontal Grinding Wheel Spindle, with Round Table; Acceptance Conditions

DIN 8632-4

Machine Tools; Surface Grinding Machines; Surface Grinding Machines with Two Columns; Grinding-machines for Grinding Slideways; Acceptance Conditions

DIN 8634

Machine tools - External cylindrical centreless grinding machines - Acceptance conditions

DIN 8635

Acceptance Conditions for Machine Tools; Vertical Honing Machines up to 500 mm Length of Stroke

DIN 8637

Machine tools; grinding spindles with cartridge diameters up to 200 mm; acceptance conditions

DIN 8651

Machine tools; straight sided power presses; acceptance conditions