DIN EN 60027-4

(DRAFT) Letter symbols to be used in electrical technology - Part 4: Rotating electric machines (IEC 25/330/FDIS:2006); German version prEN 60027-4:2006

DIN IEC 60050-411/A1

(DRAFT) International Electrotechnical Vocabulary - Part 411: Rotating machinery (IEC 1/1988/CDV:2006)

DIN 1715-1

Thermostat metals; technical delivery conditions

DIN 1715-2

Thermostat metals; testing the specific thermal curvature

DIN 42562-1

Transformers; silica gel breathers with fillings of 1,2 to 4,8 kg; assembly

DIN 42562-2

Transformers; silica gel breathers with fillings of 1,2 to 4,8 kg; components

DIN 43673-1

Drilled holes and screw connections for busbars; Rectangular cross section busbars

DIN 45635-12

Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Electrical switchgear and control gear

DIN 48203-1

Copper wires and copper stranded conductors; technical delivery conditions

DIN 48203-3

Steel wires and steel stranded conductors; technical delivery conditions

DIN 48203-7

Copper covered steel wires and copper covered steel stranded conductors; technical delivery conditions

DIN 50431

Testing of semiconductor materials; measurement of the resistivity of silicon or germanium single crystals by means of the four probe/direct current method with collinear array

DIN 50445

Contactless determination of the resistivity of homogeneously-doped semiconductor slices with the eddy current induction method

DIN EN 60061-1

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps (IEC 60061-1:1969 + supplements A:1970 to V:1997 + A21:1998 to A36:2005, modified); German version EN 60061-1:1993 + A1:1995 to A7:1997 + A21:1998 to A36:2005

DIN IEC 60300-3-4

(DRAFT) Dependability Management - Part 3: Application Guide - Section 4: Guide to the Specification of Dependability Requirements (IEC 56/1039/CD:2005)

DIN IEC 61025

(DRAFT) Fault tree analysis (FTA) (IEC 56/882/CD:2003)

DIN 1304-3

Letter symbols for physical quantities - Symbols for use in electric power engineering

DIN 1304-7

Letter symbols for physical quantities - Symbols to be used for electrical machines

DIN 16873

Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for cable ducting - Dimensions and technical delivery conditions

DIN 16874

Pipes and fittings of high-density polyethylene (PE-HD) for cable ducting - Dimensions and technical delivery conditions

DIN 16875

Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for buried ducting - Dimensions and technical delivery conditions

DIN 16876

High density polyethylene (PE-HD) pipes and fittings for buried ducting - Dimensions and technical delivery conditions

DIN 17122

Steel Conductor Contact Rails for Electric Traction; Technical Conditions of Delivery

DIN 17405

Soft Magnetic Materials for Direct Current Relays; Technical Conditions of Delivery

DIN 17470

Heating conductor alloys; technical delivery conditions for round and flat wire

DIN 40613

Products Based on Built-up or Treated Mica Paper for Electrical Insulation; Insulating Laminae for Commutators; Dimensions

DIN 40614

Products Based on Built-up or Treated Mica Paper for Electrical Insulation; Laminated Wide and Small Strips; Dimensions

DIN 40616

Laminated Products; Compression Moulded Square Tubes of Paper-base Laminate or Fabric-base Laminate

DIN 40617

Laminated Products; Compression Moulded Hexagon Tubes of Paper-base Laminate or Fabric-base Laminate

DIN 40618

Laminated Products; Laminated Moulded Tubes of Rectangular Cross-section, Paper-base Laminate or Fabric-base Laminate

DIN 40625

Laminated Products; Solid Bars of Paper-base Laminate or Fabric-base Laminate

DIN 40633-2

Pressure-sensitive Adhesive Tapes Used for Electrical Insulation; Fabric-based Tapes; Types, Requirements, Testing

DIN 40633-3

Pressure-sensitive Adhesive Tapes Used for Electrical Insulation; Tapes with Thermosetting Lamina of Adhesive; Types, Requirements, Testing

DIN 41611-4

Solderless electrical connections; clip connections; terminology, requirements, testing

DIN 42023-2

Built-on Motors for Oil Burners; Mounting Dimensions for the Mounting of the Oil Pump

DIN 42538

Transformers; Fixing Arrangement for Bushings

DIN 42539-1

Transformers; Bushings for Indoor and Outdoor Types; Insulation Class 3 N for 250 A to 3150 A, Assembly

DIN 42539-2

Transformers; Bushings for Indoor and Outdoor Types; Insulation Class 3 N for 250 A to 3150 A, Single Parts

DIN 43156

Electric Traction; Conducter Rail; Dimensions and Characteristics

DIN 43539-1

Storage cells and batteries; testing; general information and general test methods

DIN 43628

Fuse boxes for circuit protection equipment

DIN 43673-2

Drilled holes and screw connections for busbars; Channel section busbars

DIN 44767

Appliance Coupling for the Primary Connection of Resistance Welding Transformers, 200 A 550 V

DIN 46211

Stamped Cable Sockets for Copper Conductors

DIN 46288

Connecting Washers for Conductors

DIN 46420

Round Aluminium Wires for Electrical Purposes, Drawn; Dimensions

DIN 46424

Switchgear; Extruded Channel Sections of Aluminium for Busbars

DIN 46425

Round Aluminium Wires for Electrical Purposes, Exactly Drawn; Dimensions

DIN 46431

Round Copper Wires for Electrical Purposes; Precision Drawn, Dimensions

DIN 46449

Insulating Varnishes and Insulating Resin Materials for Electrical Purposes; Finishing Varnishes, Test Methods

DIN 46460-2

Winding Wires; Round Resistance Wires, Enamelled, Self-fluxing, Type V; Technical Conditions of Delivery

DIN 46460-3

Winding Wires; Round Resistance Wires, Enamelled, Heat-resistant with a Temperature Index of 180, Type W 180; Technical Conditions of Delivery

DIN 47600-1

Cast Metal Joint Boxes for Power Cables up to 10 kV; Protective Joint Boxes

DIN 47600-2

Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Joint Boxes

DIN 47600-3

Cast Metal Joint Boxes for Power Cables up to 10 kV; Correlation of Joint Boxes with Paper-insulated Cables; Correlation of Bare Stranded Copper Bonding Wire

DIN 47600-4

Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Design for Paper-insulated Cables

DIN 47600-5

Cast Metal Joint Boxes for Power Cables up to 10 kV; Installation Instructions for Paper-insulated Cables

DIN 47600-6

Cast Metal Joint Boxes for Power Cables up to 10 kV; Correlation of Joint Boxes with Plastic Insulated Cables 0.6/1 kV

DIN 47600-7

Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Design for Plastic Insulated Cables 0.6/1 kV

DIN 49020

Conduit for Electrical Wiring; Screwed Steel Conduit, Plain Conduit, Couplers

DIN 50434

Testing of materials for semiconductor technology; detection of crystal defects in monocrystalline silicon using etching techniques on {111} and {100} surfaces

DIN 50435

Testing of semiconductor materials; determination of the radial resistivity variation of silicon or germanium slices by means of the four-probe/direct current method

DIN 50438-1

Determination of interstitial oxygen content of silicon intended for use in semiconductor technology by infrared absorption spectroscopy

DIN 50440

Measurement of carrier lifetime in single-crystal silicon at low injection by the photoconductivity method

DIN 50441-4

Determining the dimensions of semiconductor wafers - Diameter and diameter variation, and flat diameter, length and depth

DIN 50443-1

Testing of materials for use in semiconductor technology; detection of crystal defects and inhomogeneities in silicon single crystals by X-ray topography

DIN 50446

Testing of materials for semiconductor technology - Determination of defect types and defect densities of silicon epitaxial layers

DIN 50447

Testing of materials for semiconductor technology - Contactless determination of the electrical sheet resistance of semiconductor layers with the eddy-current method

DIN 50448

Testing of materials for semiconductor technology - Contactless determination of the electrical resistivity of semi-insulation semiconductor slices using a capacitive probe

DIN 50449-1

Testing of materials for semiconductor technology - Determination of impurity content in semiconductors by infrared absorption - Part 1: Carbon in gallium arsenide

DIN 50449-2

Testing of materials for semiconductor technology - Determination of impurity content in semiconductors by infrared absorption - Part 2: Boron in gallium arsenide

DIN 50451-1

Determination of trace elements in liquids for use in semiconductor technology - Part 1: Determination of calcium, copper, gold, iron, potassium, silver and sodium in nitric acid by atomic absorption spectrometry

DIN 50451-2

Determination of trace elements in liquids for use in semiconductor technology - Part 2: Determination of calcium, chromium, cobalt, copper, iron, nickel and zinc in hydrofluoric acid by plasma emission spectroscopy

DIN 50451-3

Determination of traces of elements in liquids for use in semiconductor technology - Part 3: Determination of aluminium, cobalt, copper, nickel, sodium and zinc in nitric acid by inductively-coupled plasma mass spectrometry (ICP-MS)

DIN 50452-1

Particle analysis of liquids for use in semiconductor technology by the microscopic particle determination

DIN 50452-2

Particle analysis of liquids for use in semiconductor technology using optical particle counters

DIN 50452-3

Particle analysis in liquids for use in semiconductor technology - Part 3: Calibration of optical particle counters

DIN 50453-1

Gravimetric determination of etch rate of mixtures for etching silicon single crystals for use in semiconductor technology

DIN 50453-2

Spectrophotometric determination of etch rate of mixtures for etching silicon dioxide coatings for use in semiconductor technology

DIN 50454-2

Determining etch pit density in single crystals of III-V compound semiconductors

DIN 50455-2

Characterization of photoresists used in semiconductor technology - Part 2: Determination of photosensitivity of positive photoresists

DIN 50456-3

Characterization of encapsulating compounds for electronic components used in semiconductor technology - Part 3: Determination of cationic impurities

DIN 50460

Determination of magnetic properties of soft magnetic materials; general, terminology and principles of measurement

DIN 53483-1

Testing of Insulating Materials; Determination of Dielectric Properties; Definitions, General Information

DIN 53483-2

Testing of Insulating Materials; Determination of Dielectric Properties; Testing at Standard Frequencies of 50 Hz, 1 kHz, 1 MHz

DIN 53483-3

Testing of Insulating Materials; Determination of Dielectric Properties; Measuring Cells for Liquids for Frequencies up to 100 MHz

DIN 53489

Testing of Electrical Insulating Materials; Asessing the Effect of Electrolytic Corrosion

DIN 6281

Generator Sets with Reciprocating Internal Combustion Engines; Connection Dimensions for Generators and Reciprocating Internal Combustion Engines

DIN 89345

Earthing inserts for glands for electrical cables and insulated wires

DIN EN 13160-7

Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets

DIN EN 60061-2

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders (IEC 60061-2:1969 + supplements A:1970 to S:1997 + A18:1998 to A33:2005, modified); German version EN 60061-2:1993 + A1:1995 to A7:1997 + A18:1998 to A33:2005

DIN EN 61360-4

Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes (IEC 61360-4:2005); German version EN 61360-4:2005, text in English

DIN EN ISO 3915

Measurement of resistivity of conductive plastics (ISO 3915:1981)

DIN IEC 51/574/CD

(DRAFT) Magnetic oxide cores (E-Cores) of rectangular cross-section and associated parts - Dimensions (IEC 51/574/CD:2000, text in English)

DIN IEC 60050-351

(DRAFT) International Electrotechnical Vocabulary - Part 351: Control Technology (IEC 65/324/CDV:2003)

DIN IEC 60050-394

(DRAFT) International Electrotechnical Vocabulary - Part 394: Nuclear instrumentation: Instruments (IEC 1/1939/CDV:2004)

DIN IEC 60050-426

(DRAFT) International Electrotechnical Vocabulary - Chapter 426: Equipment for explosive atmospheres (IEC 1/1976A/CDV:2005)

DIN IEC 60050-581

(DRAFT) International Electrotechnical Vocabulary - Part 581: Electromechanical components for electronic equipment (IEC 1/1982/CDV:2006)

DIN IEC 60086-2/A1

(DRAFT) Primary batteries - Part 2: Physical and electrical specifications; Addition of a digital camera test for the LR6 battery type, addition of hearing aid tests for the PR41, PR44, PR48 and PR70 battery types, and change load non smoke detector test for the 6F22 and 6LR61 battery types (IEC 35/1185/CD:2002)

DIN IEC 60300-3-11

(DRAFT) Dependability Management - Part 3-11: Application guide - Reliability centred maintenance (IEC 56/1087/CD:2005)

DIN IEC 60300-3-15

(DRAFT) Dependability management - Part 3-15: Guidance to engineering of system dependability (IEC 56/1088/CD:2005)

DIN IEC 60300-3-4

(DRAFT) Dependability Management - Part 3: Application Guide - Section 4: Guide to the Specification of Dependability Requirements (IEC 56/1039/CD:2005)

DIN IEC 60605-3-4

Equipment reliability testing; preferred test conditions; equipment for portable and non-stationary use; low degree of simulation; identical with IEC 60605-3-4:1992

DIN IEC 60706-3

(DRAFT) Maintainability of equipment - Part 3: Guide to maintainability verification, and the collection, analysis and presentation of maintainability data (IEC 56/844/CD:2003)

DIN IEC 60810/A1

(DRAFT) Lamps for road vehicles - Performance requirements (IEC 34A/1185/CD:2006)

DIN IEC 62402

(DRAFT) Guide to managing obsolescence (IEC 56/1000/CD:2004)

DIN ISO 7919-5

Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 5: Machine sets in hydraulic power generating and pumping plants (ISO 7919-5:2005)

DIN 50441-1

Testing of materials for semiconductor technology - Determination of the geometric dimensions of semiconductor wafers - Part 1: Thickness and thickness variation

DIN 51353

Testing of insulating oils; detection of corrosive sulfur; silber strip test

DIN EN 10252

Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies

DIN EN 10257-1

Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables

DIN EN 10257-2

Zinc or zinc alloy-coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables

DIN EN 10280

Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester (includes Amendment A1:2007)

DIN EN 10282

Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip; English version of DIN EN 10282

DIN EN 10330

Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open circuit

DIN EN 10331

Magnetic materials - Specification for sintered soft magnetic materials

DIN EN 10332

Magnetic materials - Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties

DIN EN 10342

Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations

DIN EN 12184

Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods

DIN EN 12465

Wood poles for overhead lines - Durability requirements

DIN EN 12479

Wood poles for overhead lines - Sizes - Methods of measurements and limit deviations

DIN EN 12509

Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content

DIN EN 12510

Wood poles for overhead lines - Strength grading criteria; English version of DIN EN 12510:2001 + AC:2002

DIN EN 12511

Wood poles for overhead lines - Determination of characteristic values

DIN EN 12601

Reciprocating internal combustion engine driven generating sets - Safety; English version of DIN EN 12601

DIN EN 13032-1

Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format

DIN EN 13032-2

Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places

DIN EN 13160-1

Leak detection systems - Part 1: General principles

DIN EN 13160-2

Leak detection systems - Part 2: Pressure and vacuum systems

DIN EN 13160-3

Leak detection systems - Part 3: Liquid systems for tanks

DIN EN 13160-4

Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces

DIN EN 13160-6

Leak detection systems - Part 6: Sensors in monitoring wells

DIN EN 13237

Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres

DIN EN 14460

Explosion resistant equipment

DIN EN 45510-2-3

Guide for procurement of power station equipment - Part 2-3: Electrical equipment; Stationary batteries and chargers; English version of DIN EN 45510-2-3

DIN EN 45510-2-4

Guide for procurement of power station equipment - Part 2-4: Electrical equipmen; High power static convertors; English version of DIN EN 45510-2-4

DIN EN 45510-2-6

Guide for procurement of power station equipment - Part 2-6: Electrical equipment; Generators; English version of DIN EN 45510-2-6

DIN EN 45510-2-7

Guide for procurement of power station equipment - Part 2-7: Electrical equipment; Switchgear and controlgear

DIN EN 50503

(DRAFT) Fluids for electrotechnical applications - Standard for the inventory control, management, decontamination and/or disposal of electrical equipment and insulating liquids containing PCBs; German version prEN 50503:2006

DIN EN 60061-1

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps (IEC 60061-1:1969 + supplements A:1970 to V:1997 + A21:1998 to A37:2006, modified); German version EN 60061-1:1993 + A1:1995 to A7:1997 + A21:1998 to A37:2006

DIN EN 60061-2

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders (IEC 60061-2:1969 + supplements A:1970 to S:1997 + A18:1998 to A34:2006, modified); German version EN 60061-2:1993 + A1:1995 to A7:1997 + A18:1998 to A34:2006

DIN EN 60061-3

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + supplements A:1970 to U:1997 + A20:1998 to A35:2005, modified); German version EN 60061-3:1993 + A1:1995 to A7:1997 + A20:1998 to A35:2005

DIN EN 60061-3

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + supplements A:1970 to U:1997 + A20:1998 to A36:2006, modified); German version EN 60061-3:1993 + A1:1995 to A7:1997 + A20:1998 to A36:2006

DIN EN 60061-4

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information (IEC 60061-4:1990 + supplements A:1992, B:1994, C:1994, D:1995 + A5:1998 to A9:2004, modified); German version EN 60061-4:1992 + A1:1995 to A9:2005

DIN EN 60404-1

(DRAFT) Magnetic materials - Part 1: Classification (IEC 68/174A/CDV:1997); German version prEN 60404-1:1997

DIN EN 60417-1

Graphical symbols for use on equipment - Part 1: Overview and application (IEC 60417-1:1998); Trinlingual version EN 60417-1:1998

DIN EN 60417-2

Graphical symbols for use on equipment - Part 2: Symbol originals (IEC 60417-2:1998); Trilingual version EN 60417-2:1999

DIN EN 60617-12

Graphical symbols for diagrams - Part 12: Binary logic elements (IEC 60617-12:1997); German version EN 60617-12:1998

DIN EN 60617-13

Graphical symbols for diagrams; part 13: analogue elements (IEC 60617-13:1993); German version EN 60617-13:1993

DIN EN 60617-2

Graphical symbols for diagrams - Part 2: Symbol elements, qualifying symbols and other symbols having general application (IEC 60617-2:1996); German version EN 60617-2:1996

DIN EN 60617-3

Graphical symbols for diagrams - Part 3: Conductors and connecting devices (IEC 60617-3:1996); German version EN 60617-3:1996

DIN EN 60617-4

Graphical symbols for diagrams - Part 4: Basic passive components (IEC 60617-4:1996); German version EN 60617-4:1996

DIN EN 60617-6

Graphical symbols for diagrams - Part 6: Production and conversion of electrical energy (IEC 60617-6:1996); German version EN 60617-6:1996

DIN EN 60617-7

Graphical symbols for diagrams - Part 7: Switchgear, controlgear and protective devices (IEC 60617-7:1996); German version EN 60617-7:1996

DIN EN 60617-8

Graphical symbols for diagrams - Part 8: Measuring instruments, lamps and signalling devices (IEC 60617-8:1996); German version EN 60617-8:1996

DIN EN 61228

(DRAFT) Method of measuring and specifying fluorescent ultraviolet lamps used for tanning (IEC 34A/1177/CDV:2006); German version prEN 61228:2006

DIN EN 61360-2

Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema (IEC 61360-2:2002 + A1:2003); German version EN 61360-2:2002 + A1:2004, text English

DIN EN 61360-5

Standard data element types with associated classification scheme for electric components - Part 5: Extensions to the EXPRESS dictionary schema (IEC 61360-5:2004); German version EN 61360-5:2004, text English

DIN EN 61810-7

(DRAFT) Electromechanical elementary relays - Part 7: Test and measurement procedures (IEC 94/212/CDV:2004); German version prEN 61810-7:2004

DIN EN 61915

(DRAFT) Low-voltage switchgear and controlgear - Representation of networked industrial devices (device profiles) - Part 1: General rules (IEC 17B/1129/CDV:2001); German version prEN 61915:2001, text in English

DIN EN 80416-1

(DRAFT) Basic principles for graphical symbols for use on equipment - Part 1: Creation of graphical symbols for registration (IEC 3C/1494/CDV:2006); German version prEN 80416-1:2006

DIN EN ISO 10807

Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres (ISO 10807:1994)

DIN EN ISO 1680

Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:1999); English version of DIN EN ISO 1680

DIN EN ISO 7284

Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry (ISO 7284:1993)

DIN IEC 21/520/CD

(DRAFT) IEC 61044: Opportunity-charging of lead-acid traction batteries (IEC 21/520/CD:2000)

DIN IEC 60050-102

(DRAFT) International Electrotechnical Vocabulary - Part 102: Mathematics: General concepts and linear algebra (IEC 1/1953/CDV:2005)

DIN IEC 60050-111/A1

(DRAFT) Amendment 1 to IEC 60050-111:1996 - International Electrotechnical Vocabulary (IEV) - Part 111: Physics and chemistry - Time-related concepts (IEC 1/1915/CDV:2003)

DIN IEC 60050-131/A1

(DRAFT) International Electrotechnical Vocabulary - Part 131: Circuit theory (IEC 1/2014/CDV:2006)

DIN IEC 60050-221/A3

(DRAFT) International Electrotechnical Vocabulary - Amendment 3 to Chapter 221: Magnetic materials and components (IEC 1/1931/CDV:2004)

DIN IEC 60050-461

(DRAFT) International Electrotechnical Vocabulary - Part 461: Electric cables (IEC 1/1965/CDV:2005)

DIN IEC 60050-461

(DRAFT) International Electrotechnical Vocabulary - Part 461: Electric cables (IEC 1/1965/CDV:2005)

DIN IEC 60050-461

(DRAFT) International Electrotechnical Vocabulary - Part 461: Electric cables (IEC 1/1965/CDV:2005)

DIN IEC 60050-471

(DRAFT) International Electrotechnical Vocabulary - Part 471: Insulators (IEC 1/1956/CDV:2005)

DIN IEC 60050-851

(DRAFT) International Electrotechnical Vocabulary - Part 851: Electric welding (IEC 1/1990/CDV:2006)

DIN IEC 60064/A4

(DRAFT) Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements (IEC 34A/1141/CD:2005)

DIN IEC 60095-2

(DRAFT) Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals (IEC 21/537/CD:2001)

DIN IEC 60254-2

(DRAFT) Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells (IEC 21/631/CD:2005)

DIN IEC 60254-2

(DRAFT) Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells (IEC 21/631/CD:2005)

DIN IEC 60254-2

(DRAFT) Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells (IEC 21/631/CD:2005)

DIN IEC 60300-3-4

(DRAFT) Dependability Management - Part 3: Application Guide - Section 4: Guide to the Specification of Dependability Requirements (IEC 56/1039/CD:2005)

DIN IEC 60317-0-5

(DRAFT) Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire (IEC 55/938/CD:2005)

DIN IEC 60317-0-6/A1

(DRAFT) Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire (IEC 55/940/CD:2005)

DIN IEC 60317-11

(DRAFT) Specifications for particular types of winding wire - Part 11: Bunched solderable polyurethane enamelled round copper wire, class 130, with silk covering (IEC 55/850/CD:2003)

DIN IEC 60344

(DRAFT) Guide to the calculation of resistance of plain and coated copper conductors of low-frequency cables and wires (IEC 46C/693/CD:2004)

DIN IEC 60357/A1

(DRAFT) Tungsten-halogen lamps (non-vehicle) - Performance specifications - Amendment 1 to IEC 60357, Edition 3 (IEC 34A/1052/CD:2003)

DIN IEC 60404-2/A1

(DRAFT) Magnetic materials - Part 2: Methods of measurement of magnetic properties of electrical steel sheet and strip by means of an Epstein frame (IEC 68/321/CD:2005)

DIN IEC 60404-4/A2

(DRAFT) Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials (IEC 68/339/CD:2007)

DIN IEC 60556/A2

(DRAFT) Measuring methods for properties of gyromagnetic materials intended for application at microwave frequencies - Amendment 2 to IEC 60556 (IEC 51/731/CD:2003)

DIN IEC 60605-6

(DRAFT) Equipment reliability testing - Part 6: Estimating failure rate or failure intensity and testing the validity of their constancy assumptions (IEC 56/937/CD:2004)

DIN IEC 60809/A4

(DRAFT) Lamps for road vehicles - Dimensional, electrical and luminous requirements (IEC 34A/1156/CD:2006)

DIN IEC 60851-5

(DRAFT) Winding wires - Test methods - Part 5: Electrical properties (IEC 55/1000/CD:2006)

DIN IEC 60901/A4

(DRAFT) Single-capped fluorescent lamps - Performance specifications (IEC 34A/1139/CD:2005)

DIN IEC 61124

(DRAFT) Reliability testing - Compliance tests for constant failure rate and constant failure intensity; (IEC 56/833/CD:2002 + IEC 56/834/CD:2002, text in English)

DIN IEC 61163-3

(DRAFT) Reliability stress screening - Part 3: Reliability screening of repairable single items (IEC 56/951/CD:2004)

DIN IEC 61436

(DRAFT) Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride rechargeable single cells (IEC 21A/303/CD:2000)

DIN IEC 61800-7-1

(DRAFT) Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition (IEC 22G/152/CD:2005), text in English

DIN IEC 61800-7-2

(DRAFT) Adjustable speed electrical power drive systems - Part 7-2: Generic interface and use of profiles for power drive systems - Profile specifications (IEC 22G/153/CD:2005), text in English

DIN IEC 61800-7-3

(DRAFT) Adjustable speed electrical power drive systems - Part 7-3: Generic interface and use of profiles for power drive systems - Mapping of profiles to network technologies (IEC 22G/154/CD:2005), text in English

DIN IEC 61934

(DRAFT) Elektrical insulation Systems (EIS) - Electrical measurements of Partial Discharges during Short-Risetime, Repetitive-Voltage Impulses (IEC 98/211/CD:2004)

DIN IEC 62024-1

(DRAFT) High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor (IEC 51/881/CD:2006)

DIN IEC 62024-2

(DRAFT) High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converter (IEC 51/878/CD:2006)

DIN IEC 62025-1

(DRAFT) High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductor for use in electronic and telecommunication equipment (IEC 51/844/CD:2005)

DIN IEC 62223

(DRAFT) Insulators - Glossary of terms (IEC 36/243/CD:2005)

DIN IEC 62246-2

(DRAFT) Reed contact units - Part 2: Heavy-duty reed switches (IEC 94/220/CD:2005)

DIN IEC 62246-2

(DRAFT) Reed contact units - Part 2: Heavy-duty reed switches (IEC 94/220/CD:2005)

DIN IEC 62246-2

(DRAFT) Reed contact units - Part 2: Heavy-duty reed switches (IEC 94/220/CD:2005)

DIN IEC 62308

(DRAFT) Reliability assessment and durability analysis (IEC 56/854/CD:2003)

DIN IEC 62317-13

(DRAFT) Ferrite cores - Dimensions - Part 13: PQ-cores for use in power supply applications (IEC 51/879/CD:2006)

DIN IEC 62347

(DRAFT) Guidelines for establishing criteria for system dependability specifications (IEC 56/916/CD:2003)

DIN IEC 62371

(DRAFT) Characteristics of hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V (IEC 36C/161/CD:2006)

DIN IEC 62454

(DRAFT) Electromechanical components and mechanical structures for electronic equipment - Interface dimensions for water cooling provisions of electronic equipment within cabinets of the IEC 60297 and IEC 60917 series (IEC 48D/343/CD:2006)

DIN IEC 62468

(DRAFT) The marking for presence and absence of the specified chemical substance in materials, components and mounted boards used in electrical and electronic equipment (IEC 91/612/CD:2006)

DIN ISO 10656

Electric resistance welding - Integrated transformers for welding guns (ISO 10656:1996, including Technical Corrigendum 1:2000)

DIN ISO 8528-9

Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations (ISO 8528-9:1995)