|
DIN 74361-3 |
Disc wheels for motor vehicles and trailers; dimensions and fasteners for attachment with centring on wheel bore |
|
DIN 74361-2 |
Disc wheels for motor vehicles and trailers; fasteners for stud centring |
|
DIN 15018-1 |
Cranes; steel structures; verification and analyses |
|
DIN 15018-2 |
Cranes; steel structures; principles of design and construction |
|
DIN 15018-3 |
Cranes; principles relating to steel structures; design of cranes on vehicles |
|
DIN 15402-2 |
Lifting hooks for lifting appliances; Ramshorn hooks; Finished parts with threaded shank |
|
DIN 15062-1 |
Cranes; rope pulleys; selected ranges and correlation of diameters and overall widths |
|
DIN 15417 |
Cranes; bottom blocks; type D rope pulleys with plain bearings |
|
DIN 15418-2 |
Cranes; bottom blocks; spacer sleeves for type C rope pulleys with deep groove ball bearing, without internal sleeve |
|
DIN 4132 |
Craneways; Steel structures; Principles for calculation, design and construction |
|
DIN 5512-2 |
Steels for use in rail vehicle construction - Part 2: Unalloyed steels for cold-rolled flat products up to 3 mm thick |
|
DIN 5906 |
Short clips for grooveless flat bottom rails - Dimensions, steel types |
|
DIN 8188-3 |
American type roller chains - Roller chains with extended pins - Connecting dimensions |
|
DIN EN 1726-1 |
Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N - Part 1: General requirements |
|
DIN EN ISO 5353 |
Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995) |
|
DIN ISO 5053 |
Powered industrial trucks - Terminology; identical with ISO 5053:1987 |
|
DIN 15001-1 |
Cranes; Vocabulary, classification according to type |
|
DIN 15001-2 |
Cranes; Vocabulary, classification according to application |
|
DIN 15002 |
Lifting appliances; Load carrying devices; Vocabulary |
|
DIN 15003 |
Lifting Appliances; Load Suspending Devices, Loads and Forces; Definitions |
|
DIN 15019-2 |
Cranes; Stability for Non Rail-mounted Mobile Cranes; Test Loading and Calculation |
|
DIN 15020-1 |
Lifting Appliances; Principles Relating to Rope Drives; Calculation and Construction |
|
DIN 15020-2 |
Lifting Appliances; Principles Relating to Rope Drives; Supervision during Operation |
|
DIN 15025 |
Cranes; Direction of actuation and arrangement of controls in crane cabins |
|
DIN 15026 |
Lifting appliances; Marking of points of hazard |
|
DIN 15030 |
Lifting Equipment; Acceptance Testing of Crane Installations; Principles |
|
DIN 15055 |
Steelworks, rolling mills and cranes; interference fits using oil under pressure; application, dimensions, design |
|
DIN 15062-2 |
Cranes; rope pulleys; dimensions of hubs and bearings |
|
DIN 15090 |
Cranes; driving wheel units and idler wheel units; assembly |
|
DIN 15091 |
Cranes; driving wheel units and idler wheel units; travelling wheel shafts |
|
DIN 15092 |
Cranes; driving wheel units and idler wheel units; sealing covers |
|
DIN 15093 |
Cranes; driving wheel units and idler wheel units; travelling wheels |
|
DIN 15094 |
Cranes; driving wheel units and idler wheel units; bearing cage rings |
|
DIN 15105 |
Lifting hooks for lifting appliances; point hooks with collar |
|
DIN 15400 |
Lifting hooks; materials, mechanical properties, lifting capacity and stresses |
|
DIN 15401-1 |
Lifting hooks for lifting appliances; Single hooks; Unmachined parts |
|
DIN 15401-2 |
Lifting hooks for lifting appliances; Single hooks; Finished parts with threaded shank |
|
DIN 15403 |
Lifting Hooks for Hoists; Knuckle Threads |
|
DIN 15404-1 |
Lifting hooks; technical delivery conditions for forged hooks |
|
DIN 15404-2 |
Lifting hooks; technical delivery conditions for laminated hooks |
|
DIN 15405-2 |
Lifting hooks; In-service inspection of laminated hooks |
|
DIN 15407-2 |
Laminated point hooks for spigot ladles; components |
|
DIN 15408 |
Cranes; twin sheave bottom blocks; assembly |
|
DIN 15410 |
Serial lifting appliances; single and twin sheave bottom blocks for electric hoists; assembly |
|
DIN 15411 |
Lifting appliances; lifting hook suspensions for bottom blocks |
|
DIN 15412-1 |
Bottom blocks for lifting appliances; cross pieces; unmachined parts |
|
DIN 15413 |
Bottom blocks for lifting appliances; lifting hook nuts |
|
DIN 15414 |
Bottom blocks for lifting appliances; securing plates |
|
DIN 15418-1 |
Cranes; bottom blocks; type C rope pulleys with deep groove ball bearing, without internal sleeve |
|
DIN 15418-3 |
Cranes; bottom blocks; sealing covers for type C rope pulleys with deep groove ball bearing, without internal sleeve |
|
DIN 15421-1 |
Cranes; bottom blocks; type B rope pulleys with deep groove ball bearing and internal sleeve |
|
DIN 15421-2 |
Cranes; bottom blocks; internal sleeves and spacer sleeves for type B rope pulleys with deep groove ball bearing and internal sleeve |
|
DIN 15422-1 |
Cranes; bottom blocks; type A rope pulleys with cylindrical rolling bearing and internal sleeve |
|
DIN 15422-2 |
Cranes; bottom blocks; internal sleeves and spacer sleeves for type A rope pulleys with cylindrical rolling bearing and internal sleeve |
|
DIN 15422-3 |
Cranes; bottom blocks; sealing covers for type A rope pulleys with cylindrical rolling bearing and internal sleeve |
|
DIN 4132 Beiblatt 1 |
Craneways; Steel structures, Principles for calculation, design and construction, Explanations |
|
DIN 4212 |
Reinforced concrete and prestressed concrete craneways; design and construction |
|
DIN 45635-45 |
Measurement of airborne noise emitted by machines; enveloping surface method; continuous handling equipment |
|
DIN 52305 |
Determining the optical distortion and refractive power of safety glazing material for road vehicles |
|
DIN 5512-1 |
Steels for use in rail vehicle construction - Part 1: Hot-rolled, unalloyed structural steels and hot-rolled structural steels with improved atmospheric corrosion resistance |
|
DIN 5512-3 |
Materials for rail vehicles - Steels - Part 3: Stainless steel flat products; Selected standard |
|
DIN 5512-4 |
Steels for use in rail vehicle construction - Fine-grain structural steels |
|
DIN 5687-1 |
Round steel link chains - Part 1: Grade 5, medium tolerance, tested |
|
DIN 5688-1 |
Grade 5 chain slings with hook or ring type terminal fittings |
|
DIN 764-2 |
Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 3,5d |
|
DIN 81249-1 |
Corrosion of metals in sea water and sea atmosphere - Part 1: Definitions, basic information |
|
DIN 81249-2 |
Corrosion of metals in sea water and sea atmosphere - Part 2: Free corrosion in sea water |
|
DIN 81249-3 |
Corrosion of metals in sea water and sea atmosphere - Part 3: Galvanic corrosion in sea water |
|
DIN 81249-4 |
Corrosion of metals in sea water and sea atmosphere - Part 4: Corrosion in sea atmosphere |
|
DIN 8187-2 |
European type roller chains - Simple roller chains with attachment plates - Connecting dimensions |
|
DIN 8187-3 |
European type roller chains - Simple roller chains with extended pins - Connecting dimensions |
|
DIN 8188-2 |
American type roller chains - Simple roller chains with attachment plates - Connecting dimensions |
|
DIN 8196-1 |
Toothing of chain wheels for roller chains as specified in DIN 8187 and DIN 8188; profile dimensions |
|
DIN 85005 Beiblatt 1 |
Ships and marine technology - Graphical symbols for technical documentation - Index |
|
DIN EN 12053 |
Safety of industrial trucks - Test methods for measuring noise emissions |
|
DIN EN 12643 |
Rubber-tyred earth-moving machinery - Steering requirements (ISO 5010:1992, modified) |
|
DIN EN 1398 |
Dock levellers |
|
DIN EN 14492-1 |
Cranes - Power driven winches and hoists - Part 1: Power driven winches |
|
DIN EN 618 |
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
|
DIN EN 62320-1 |
(DRAFT) Maritime navigation and radiocommunication equipment and systems - Automatic Identification Systems - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of test and required test results (IEC 80/427/CDV:2005); German version prEN 62320-1:2005, text in English |
|
DIN EN ISO 7096 |
Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000); English version of DIN EN ISO 7096 |
|
DIN ISO 1585 |
Road vehicles - Engine test code - Net power (ISO 1585:1992) |
|
DIN ISO 2974 |
Diesel engines - High-pressure fuel injection pipe end-connections with 60° female cone (ISO 2974:2000) |
|
DIN ISO 9815 |
Passenger car/trailer combinations - Lateral stability test (ISO 9815:1992) |
|
DIN 15207-1 |
Continuous mechanical handling equipment - Idlers for belt conveyors handling loose bulk mterials - Main dimensions |
|
DIN 15261-1 |
Continuous mechanical handling equipment for loose bulk materials; screw conveyors; mating dimensions |
|
DIN 15261-2 |
Continuous mechanical handling equipment for loose bulk materials; screw conveyors; helical screw blade |
|
DIN 15262 |
Continuous mechanical handling equipment; Screw conveyors for loose bulk materials; Design principles |
|
DIN 1571 |
Central Dimples for Spring Leaves |
|
DIN 24080 |
Earth-moving Machinery; Hydraulic Excavators Cable-operated, Excavators; Terms |
|
DIN 24087 |
Earth Moving Machinery; Determination of Stability of Hydraulic Excavators Safety Requirements |
|
DIN 24189 |
Testing of air cleaners for internal combustion engines and compressors; test methods |
|
DIN 25002-3 |
Railway applications - Designation systematic for rail vehicles - Part 3: Classification of documents |
|
DIN 25003 |
Railway applications - Classification of rail vehicles - Survey, terminology, definitions |
|
DIN 32891 |
Tested non-calibrated round steel link chains - Grade 2 |
|
DIN 37080 |
Adjusting Equipment for Brake Blocks; Survey and Arrangement |
|
DIN 37081 |
Adjusting equipment for brake bolcks; Brackets, Spring plates |
|
DIN 37082 |
Adjusting Equipment for Brake Blocks; Compression Springs, Spring Bolt |
|
DIN 45635-57 |
Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; outboard motors |
|
DIN 52289 |
Determination of chemical resistance of safety glazing materials for road vehicles |
|
DIN 536-1 |
Crane rails; hot rolled flat bottom crane rails (type A); dimensions, section parameters and steel grades |
|
DIN 536-2 |
Crane Rails, Type F (Flat); Dimensions, Static Values, Steel Grades |
|
DIN 5542 |
Ends of Laminated Springs for Rail Vehicles |
|
DIN 5684-1 |
Calibrated and tested round steel link chains for lifting purposes; grade 5 |
|
DIN 5684-2 |
Calibrated and tested round steel link chains for lifting purposes; grade 6 |
|
DIN 5688-3 |
Chain slings - Part 3: Links, grade 8; Text in German and English |
|
DIN 5902 |
Fishplates for grooveless flat bottom rails dimensions - Steel types |
|
DIN 5904 |
Steel sleepers - Dimensions, static values, steel types |
|
DIN 695 |
Grade 2 chain slings with hook or ring type terminal fittings |
|
DIN 70014-1 |
Vehicles for Transportation of Swop Bodies; Connecting Dimensions |
|
DIN 75001 |
Classes of Application for Measuring Devices in Motor Vehicles |
|
DIN 762-1 |
Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 5d |
|
DIN 762-2 |
Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 5d |
|
DIN 763 |
Tested, non-calibrated, long-link round steel chains |
|
DIN 764-1 |
Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 3,5d |
|
DIN 766 |
Calibrated and tested grade 3 round steel link chains |
|
DIN 79012 |
Screw Threads for Bicycles and Mopeds; Theoretical Values, Limiting Screw Thread Dimensions |
|
DIN 80002-1 |
Ships and marine technology - General arrangement plans for ships - Part 1: Requirements, layout |
|
DIN 80002-1 Beiblatt 1 |
Ships and marine technology - General arrangement plans for ships - Example bulkcarrier |
|
DIN 80002-1 Beiblatt 2 |
Ships and marine technology - General arrangement plans for ships - Example containership |
|
DIN 80002-1 Beiblatt 3 |
Ships and marine technology - General arrangement plans for ships - Example multipurpose ship |
|
DIN 80002-1 Beiblatt 4 |
Ships and marine technology - General arrangement plans for ships - Example Ro/Ro ship |
|
DIN 80002-1 Beiblatt 5 |
Ships and marine technology - General arrangement plans for ships - Example passenger vessel (ferries accordingly) |
|
DIN 80002-1 Beiblatt 6 |
Ships and marine technology - General arrangement plans for ships - Ships of the Federal German Navy, example frigate |
|
DIN 80002-1 Beiblatt 7 |
Ships and marine technology - General arrangement plans for ships - Example submersibles |
|
DIN 80002-1 Beiblatt 8 |
Ships and marine technology - General arrangement plans for ships - Example inland vessels |
|
DIN 80004 |
Shipbuilding related terms and definitions and abbreviations in German and English |
|
DIN 81209-1 |
Geometry and stability of ships - Symbols, terms, definitions - Part 1: General, monohull surface ships |
|
DIN 81209-2 |
Geometry and stability of ships - Symbols, terms, definitions - Part 2: Submarines |
|
DIN 81209-3 |
Geometry and stability of ships - Symbols, terms, definitions - Part 3: Multihull surface ships |
|
DIN 81209-6 |
Geometry and stability of ships - Symbols, terms, definitions - Part 6: Sailing ships |
|
DIN 8164 |
Bush chains |
|
DIN 8165-1 |
Solid bearing pin type FV conveyor chains; single-strand and double-strand chains (not to be used for new designs) |
|
DIN 8165-2 |
Solid bearing pin type FV conveyor chains; attachment plates (not to be used for new designs) |
|
DIN 8165-3 |
Solid bearing pin type FVT conveyor chains with deep plates (not to be used for new designs) |
|
DIN 8166 |
Rollers for solid breaking pin types FV and FVT conveyor chains (not to be used for new designs) |
|
DIN 8167-1 |
ISO-type M conveyor chains with solid pins; single strand chains and double strand chains |
|
DIN 8167-2 |
ISO-type M conveyor chains with solid pins; attachments; material and connecting dimensions |
|
DIN 8167-3 |
ISO-type MT conveyor chains with solid pins and deep plates |
|
DIN 8168-1 |
ISO-type MC conveyor chains with hollow pins; single strand chains |
|
DIN 8168-2 |
ISO-type MC conveyor chains with hollow pins; attachments; material and connecting dimensions |
|
DIN 8168-3 |
ISO-type MCT conveyor chains with hollow pins and deep plates |
|
DIN 8181 |
Double-pitch roller chains |
|
DIN 8182 |
Cranked-link roller chains (rotary chains) |
|
DIN 81834 |
Components for anchoring equipment - Terms and definitions |
|
DIN 81850 |
(DRAFT) Anchor chain cables grade K4 - End links |
|
DIN 81855 |
(DRAFT) Anchor chain cables grade K4 - Chain outboard shots |
|
DIN 8196-2 |
Toothing of chain wheels for use with extended-pitch precision roller chains as specified in DIN 8181; profile dimensions |
|
DIN 82003-1 |
Cargo Lifting Gear; Accessories and Fittings; Summary |
|
DIN 82003-2 |
Cargo Lifting Gear; Accessories and Fittings; Technical Conditions of Delivery |
|
DIN 82006 |
Oval Eyes with Screwed Shank for Swivels and Turnbuckles |
|
DIN 82008 |
Double Lugs with Screwed Shank for Swivels and Turnbuckles |
|
DIN 82010 |
Round Eyes with Screwed Shank for Swivels and Turnbuckles |
|
DIN 82016 |
Cargo Shackles |
|
DIN 85005-1 |
Ships and marine technology - Graphical symbols for technical documentation - Part 1: General instructions |
|
DIN 85005-10 |
Ships and marine technology - Graphical symbols for technical documentation - Part 10: Sensors and operating indicators |
|
DIN 85005-11 |
Ships and marine technology - Graphical symbols for technical documentation - Part 11: Turbines |
|
DIN 85005-12 |
Ships and marine technology - Graphical symbols for technical documentation - Part 12: Compressors |
|
DIN 85005-14 |
Ships and marine technology - Graphical symbols for technical documentation - Part 14: Pumps, filters, separators, dryers |
|
DIN 85005-15 |
Ships and marine technology - Graphical symbols for technical documentation - Part 15: Drains |
|
DIN 85005-16 |
Ships and marine technology - Graphical symbols for technical documentation - Part 16: Ventilation plants |
|
DIN 85005-17 |
Ships and marine technology - Graphical symbols for technical documentation - Part 17: Doors, hatches, openings, windows, stairs, elevators |
|
DIN 85005-18 |
Ships and marine technology - Graphical symbols for technical documentation - Part 18: Sanitary installations |
|
DIN 85005-2 |
Ships and marine technology - Graphical symbols for technical documentation - Part 2: Piping and hose assemblies, pipe and hose-joints, penetrations |
|
DIN 85005-23 |
Ships and marine technology - Graphical symbols for technical documentation - Part 23: Isolations |
|
DIN 85005-24 |
Ships and marine technology - Graphical symbols for technical documentation - Part 24: Components for measures against vibration and sound |
|
DIN 85005-27 |
Ships and marine technology - Graphical symbols for technical documentation - Part 27: Mechanical remote controls |
|
DIN 85005-3 |
Ships and marine technology - Graphical symbols for technical documentation - Part 3: Shut-off, control and regulating parts |
|
DIN 85005-30 |
Ships and marine technology - Graphical symbols for technical documentation - Part 30: Electrical energy production, energy distribution |
|
DIN 85005-31 |
Ships and marine technology - Graphical symbols for technical documentation - Part 31: Electrical installation |
|
DIN 85005-32 |
Ships and marine technology - Graphical symbols for technical documentation - Part 32: Call systems and alarm systems |
|
DIN 85005-33 |
Ships and marine technology - Graphical symbols for technical documentation - Part 33: Economic equipment |
|
DIN 85005-34 |
Ships and marine technology - Graphical symbols for technical documentation - Part 34: Control indicators for ships propulsion plants |
|
DIN 85005-35 |
Ships and marine technology - Graphical symbols for technical documentation - Part 35: Navigational equipment |
|
DIN 85005-36 |
Ships and marine technology - Graphical symbols for technical documentation - Part 36: Radio equipment, teleprinter and communication systems |
|
DIN 85005-37 |
Ships and marine technology - Graphical symbols for technical documentation - Part 37: Lighting fittings |
|
DIN 85005-38 |
Ships and marine technology - Graphical symbols for technical documentation - Part 38: Devices of electrical installations in special systems |
|
DIN 85005-4 |
Ships and marine technology - Graphical symbols for technical documentation - Part 4: Sounding pipes, air-pipes and filling pipes |
|
DIN 85005-5 |
Ships and marine technology - Graphical symbols for technical documentation - Part 5: Steam generator, heat exchanger, container |
|
DIN 85005-6 |
Ships and marine technology - Graphical symbols for technical documentation - Part 6: Freshwater distilling unit |
|
DIN 85005-7 |
Ships and marine technology - Graphical symbols for technical documentation - Part 7: Pressure tanks |
|
DIN 85005-8 |
Ships and marine technology - Graphical symbols for technical documentation - Part 8: Power transmission plant and steering gear components |
|
DIN 85005-9 |
Ships and marine technology - Graphical symbols for technical documentation - Part 9: Suction- and discharge sockets |
|
DIN 86015 |
Application and installation of unplasticized polyvinyl chloride (PVC-U) pipework with cemented joints on ships |
|
DIN 86080 |
Ships and marine technology - System Co-ordination plans in shipbuilding |
|
DIN 86082 |
(DRAFT) Ships and marine technology - Isometric projection of pipes in shipbuilding technology |
|
DIN EN 12079-2 |
Offshore containers and associated lifting sets - Part 2: Lifting sets - Design, manufacture and marking; English version EN 12079-2:2006 |
|
DIN EN 12079-3 |
Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing; English version EN 12079-3:2006 |
|
DIN EN 12195-1 |
Load restraint assemblies on road vehicles - Safety - Part 1: Calculation of lashing forces |
|
DIN EN 12195-2 |
Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres; English version of DIN EN 12195-2 |
|
DIN EN 12640 |
Securing of cargo on road vehicles - Lashing points on commerical vehicles for goods transportation - Minimum requirements and testing; English version of DIN EN 12640 |
|
DIN EN 12645 |
Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing |
|
DIN EN 12805 |
Automotive LPG components - Containers |
|
DIN EN 1306 |
Inland navigation vessels - Connections for the discharge of waste water |
|
DIN EN 13129-1 |
Railway applications - Air conditioning for main line rolling stock - Part 1: Comfort parameters |
|
DIN EN 13129-2 |
Railway applications - Air conditioning for main line rolling stock - Part 2: Type tests |
|
DIN EN 13155 |
Cranes - Non-fixed load lifting attachments |
|
DIN EN 13230-1 |
Railway applications - Track; Concrete sleepers and bearers - Part 1: General requirements |
|
DIN EN 13230-2 |
Railway applications - Track; Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers |
|
DIN EN 13230-3 |
Railway applications - Track; Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
|
DIN EN 13230-4 |
Railway applications - Track; Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings |
|
DIN EN 13230-5 |
Railway applications - Track; Concrete sleepers and bearers - Part 5: Special elements |
|
DIN EN 13411-2 |
Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings |
|
DIN EN 13414-2 |
Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer |
|
DIN EN 13510 |
Earth moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:1994, including Amendment 1:1997, modified); English version ofDIN EN 13510 |
|
DIN EN 13597 |
Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
|
DIN EN 13889 |
Forged steel shackles for general lifting purposes - Dee shackles and bow shackles; Grade 6 - Safety |
|
DIN EN 14067-3 |
Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels |
|
DIN EN 14329 |
Inland navigation vessels - Installation of berths and loading areas |
|
DIN EN 14492-2 |
Cranes - Power driven winches and hoists - Part 2: Power driven hoists |
|
DIN EN 1493 |
Vehicle lifts |
|
DIN EN 1494 |
Mobile or movable jacks and associated lifting equipment; English version of DIN EN 1494 |
|
DIN EN 15380-2 |
Railway applications - Designation system for railway vehicles - Part 2: Product groups |
|
DIN EN 1755 |
Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust; English version of DIN EN 1755 |
|
DIN EN 474-4 |
Safety of earth-moving machinery - Requirements for backhoe loaders |
|
DIN EN 61097-1/A1 |
(DRAFT) Global maritime distress and safety system (GMDSS) - Part 1: Radar transponder - Marine search and rescue (SART) - Operational and performance requirements, methods of testing and required test results (IEC 80/454/CDV:2006); German version EN 61097-1:1993/prA1:2006 |
|
DIN EN 61162-1 |
(DRAFT) Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners (IEC 80/429/CDV:2005); German version prEN 61162-1:2005, text in English |
|
DIN EN 61993-2 |
(DRAFT) Maritime navigation and radiocommunication Equipment and systems - Automatic identification systems (AIS) - Part 2: Class A shipborne equipment of the universal automatic identification system (AIS) - Operational and performance requirements, methods of test and required test results (IEC 80/436/CDV:2006); German version prEN 61993-2:2006, text in English |
|
DIN EN 62287-1 |
Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques (IEC 62287-1:2006); German version EN 62287-1:2006, text in English |
|
DIN EN 741 |
Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials; English version of DIN EN 741 |
|
DIN EN ISO 2867 |
Earth-moving machinery - Access systems (ISO 2867:1994) |
|
DIN EN ISO 2867 |
Earth-moving machinery - Access systems (ISO 2867:2006) |
|
DIN EN ISO 3164 |
Earth-moving machinery - Laboratory evaluation of protective structures - Specification for deflection-limiting volume (ISO 3164:1995) |
|
DIN EN ISO 3411 |
Earth-moving machinery - Human physical dimensions of operators and minimum operator space envelope (ISO 3411:1995) |
|
DIN EN ISO 3449 |
Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005) |
|
DIN EN ISO 3450 |
Braking systems of rubber-tyred earth-moving machinery - Systems and performance requirements and test procedures (ISO 3450:1996) |
|
DIN EN ISO 3457 |
Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003) |
|
DIN EN ISO 4165 |
Road vehicles - Electrical connections - Double-pole connection (ISO 4165:2001) |
|
DIN EN ISO 4566 |
Small craft with inboard engine - Propeller shaft ends and bosses with 1:10 taper (ISO 4566:1992) |
|
DIN EN ISO 6165 |
Earth-moving machinery - Basic types - Identification and terms and definitions (ISO 6165:2006) |
|
DIN EN ISO 8092-1 |
Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections - Dimensions and specific requirements (ISO 8092-1:1996) |
|
DIN ISO 362 |
Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method (ISO 362:1998) |
|
DIN V 81833 |
Components for anchoring equipment - Survey |
|
DIN V 81851 |
Anchor chain cables grade K4 - Kenter type joining shackles |
|
DIN 81833 |
(DRAFT) Components for anchoring equipment - Survey |
|
DIN 81841 |
(DRAFT) Anchor chain cables grade K4 - Requirements and tests |
|
DIN 81846-1 |
(DRAFT) Anchor chain cables grade K4 - Assembly, applied forces and breaking forces - Part 1: Anchor chain cables Type A with chain outboard shots |
|
DIN 81846-2 |
(DRAFT) Anchor chain cables grade K4 - Assembly, applied forces and breaking forces - Part 2: Anchor chain cables Type B without chain outboard shots |
|
DIN 81847 |
(DRAFT) Anchor chain cables grade K4 - Shots of chain cable |
|
DIN 81848 |
(DRAFT) Anchor chain cables grade K4 - Common links |
|
DIN 81849 |
(DRAFT) Anchor chain cables grade K4 - Enlarged links |
|
DIN 81851 |
(DRAFT) Anchor chain cables grade K4 - Kenter type joining shackles |
|
DIN 81852 |
(DRAFT) Anchor chain cables grade K4 - End shackles |
|
DIN 81853 |
(DRAFT) Anchor chain cables grade K4 - Swivel shackles |
|
DIN 81854 |
(DRAFT) Anchor chain cables grade K4 - Three link adapter pieces |
|
DIN 81856 |
(DRAFT) Anchor chain cables grade K4 - Slip stoppers |
|
DIN 81858 |
(DRAFT) Stud link anchor chain cables, Grade K4 - Connectors for chain outboard shots; text in German and English |
|
DIN 85004-9 |
(DRAFT) Pipelines of copper-nickel-alloys - Part 9: General principles for the radiographic examination |
|
DIN CEN/TS 13149-6 |
Public transport - Road vehicle scheduling and control systems - Part 6: CAN message content; English version CEN/TS 13149-6:2005 |
|
DIN EN 1123-3 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in shipbuilding |
|
DIN EN 1124-4 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships |
|
DIN EN 12077-2 |
Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices; English version of DIN EN 12077-2 |
|
DIN EN 12080 |
Railway applications - Axleboxes - Rolling bearings |
|
DIN EN 12081 |
Railway applications - Axleboxes - Lubricating greases |
|
DIN EN 12082 |
Railway applications - Axleboxes - Performance testing |
|
DIN EN 12195-3 |
Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains; English version of DIN EN 12195-3 |
|
DIN EN 12195-4 |
Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
|
DIN EN 12252 |
LPG equipment and accessories - Equipping of LPG road tankers |
|
DIN EN 12339 |
Inland navigation vessels - Rope tubs |
|
DIN EN 12397 |
Safety requirements for cableway installations designed to carry persons - Operation |
|
DIN EN 12408 |
Safety requirements for cableway installations designed to carry persons - Quality control |
|
DIN EN 12473 |
General principles of cathodic protection in sea water; English version of DIN EN 12473 |
|
DIN EN 12495 |
Cathodic protection for fixed steel offshore structures; English version of DIN EN 12495 |
|
DIN EN 12527 |
Castors and wheels - Test methods and apparatus |
|
DIN EN 12530 |
Castors and wheels - Castors and wheels for manually propelled institutional applications |
|
DIN EN 12532 |
Castors and wheels - Castors and wheels for applications up to 1,1 m/s (4 km/h) |
|
DIN EN 12533 |
Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h) |
|
DIN EN 1255 |
Inland navigation vessels - Swing derricks |
|
DIN EN 12561-1 |
Railway applications - Tank wagons - Part: 1: Marking of tank wagons for the carriage of dangerous goods |
|
DIN EN 12561-2 |
Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
|
DIN EN 12561-3 |
Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
|
DIN EN 12561-4 |
Railway applications - Tank wagons - Part 4: Top devices for top emptying and filling of liquid products |
|
DIN EN 12561-5 |
Railway applications - Tank wagons - Part 5: Top devices for bottom emptying and top filling of liquid products |
|
DIN EN 12561-6 |
Railway applications - Tank wagons - Part 6: Manholes |
|
DIN EN 12561-7 |
Railway applications - Tank wagons - Part 7: Platforms and ladders |
|
DIN EN 12561-8 |
Railway Applications - Tank wagons - Part 8: Heating connections |
|
DIN EN 12642 |
Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements |
|
DIN EN 12642 |
Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements; English version of DIN EN 12642 |
|
DIN EN 12644-1 |
Cranes - Information for use and testing - Part 1: Instructions; English version of DIN EN 12644-1 |
|
DIN EN 12644-2 |
Cranes - Information for use and testing - Part 2: Marking; English version of DIN EN 12644-2 |
|
DIN EN 12736 |
Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level |
|
DIN EN 12806 |
Automotive liquefied petroleum gas components - Other than containers |
|
DIN EN 12827 |
Inland navigation vessels - Connections for the transfer of diesel oil |
|
DIN EN 12881-1 |
Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
|
DIN EN 12881-2 |
Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test |
|
DIN EN 12882 |
Conveyor belts for general purpose use - Electrical and flammability safety requirements; English version of DIN EN 12882 |
|
DIN EN 12895 |
Industrial trucks - Electromagnetic compatibility; English version of DIN EN 12895 |
|
DIN EN 12927-1 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 1: Selection criteria for ropes and their end fixings |
|
DIN EN 12927-2 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 2: Safety factors |
|
DIN EN 12927-3 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes |
|
DIN EN 12927-4 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 4: End fixings |
|
DIN EN 12927-5 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 5: Storage, transportation, installation and tensioning |
|
DIN EN 12927-6 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
|
DIN EN 12927-7 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 7: Inspection, repair and maintenance |
|
DIN EN 12927-8 |
Safety requirements for cableway installations designed to carry persons - Ropes - Part 8: Magnetic rope testing (MRT) |
|
DIN EN 12929-1 |
Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations |
|
DIN EN 12929-2 |
Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
|
DIN EN 12999 |
Cranes - Loader cranes |
|
DIN EN 12999/A1 |
Cranes - Loader cranes |
|
DIN EN 13000 |
Cranes - Mobile cranes |