|
DIN EN 985 |
Textile floor coverings - Castor chair test; English version of DIN EN 985:2001 |
|
DIN EN ISO 15496 |
Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control (ISO 15496:2004) |
|
DIN EN 14362-1 Berichtigung 1 |
Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible without extraction; Corrigendum 1 to DIN EN 14362-1:2003-12 |
|
DIN EN 522 |
Adhesives for leather and footwear materials - Bond strength - Minimum requirements and adhesive classification |
|
DIN 55540-1 |
Testing of packaging; determining the filling ratio of standard capacity prepacks; prepacks whose contents are indicated by weight |
|
DIN 55540-1 Beiblatt 1 |
Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products |
|
DIN 6063-1 |
Screw threads used mainly for plastic containers - Part 1: Dimensions of buttress threads |
|
DIN 6063-2 |
Screw threads used mainly for plastic containers - Part 2: Dimensions of trapezoidal threads |
|
DIN 7274-1 |
Packaging; Steel canisters with nominal volumes of 5, 10 and 20 l; Dimensions |
|
DIN 7274-2 |
Packaging; Steel canisters with nominal volumes of 5, 10 and 20 l; Safety requirements and testing |
|
DIN EN 12280-1 |
Accelerated ageing tests applicable to rubber- or plastics-coated fabric - Part 1: Heat ageing |
|
DIN EN 14362-1 |
Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible without extraction |
|
DIN EN 14362-2 |
Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres |
|
DIN EN 14362-2 Berichtigung 1 |
Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres; German version EN 14362-2:2003, Corrigendum 1 to DIN EN 14362-2:2003-12 |
|
DIN EN 14375 Berichtigung 1 |
Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing; Corrigenda to DIN EN 14375:2004-02 |
|
DIN EN ISO 12945-1 |
Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method (ISO 12945-1:2000); English version of DIN EN ISO 12945-1 |
|
DIN EN ISO 12945-2 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method (ISO 12945-2:2000); English version of DIN EN ISO 12945-2 |
|
DIN ISO 668 |
Series 1 freight containers; classification, dimensions and ratings |
|
DIN 1102 |
Installation of DIN 1101 wood wool slabs and sandwich composite panels |
|
DIN 2023-1 |
Ends for seamed, cylindrical metal containers - Dimensions and material |
|
DIN 2023-2 |
Ends for seamed, cylindrical metal containers - Gauges |
|
DIN 2023-3 |
Ends for seamed, cylindrical metal containers - Seaming chucks |
|
DIN 281 |
Adhesives for parquet flooring - Requirements, testing and application |
|
DIN 30783-1 |
Mudular order in der transportation chain; Horizontal dimensional coordination; Concepts, principles |
|
DIN 4074-2 |
Building Timber for Wood Building Components; Quality Conditions for Building Logs (Softwood) |
|
DIN 45635-1653 |
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for double end shaping machines |
|
DIN 45635-1654 |
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for multistage edge lipping and banding machines |
|
DIN 45635-1655 |
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for final trimming machines and edge lipping and banding machines |
|
DIN 45635-1656 |
Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for two-side and multi-side planing and milling machine |
|
DIN 5134-1 |
Saw Blades for Woodworking; Technical Conditions of Delivery for Bandsaw Blades |
|
DIN 5134-4 |
Saw Blades for Woodworking; Technical Conditions of Delivery for Circular Saw Blades of Tool Steel |
|
DIN 52189-1 |
Testing of wood; Impact bending test; Determination of impact bending strength |
|
DIN 52367 |
Determining the shear strength of particleboard parallel to the plane |
|
DIN 5291 |
Roller Buckles |
|
DIN 5310 |
Industrial Sewing Machines; Safety Requirements |
|
DIN 53122-1 |
Determination of the water vapour transmission rate of plastic film, rubber sheeting, paper, board and other sheet materials by gravimetry |
|
DIN 53362 |
Determining the flexural rigidity of plastic film and woven textile fabrics with or without plastic coating by the cantilever method |
|
DIN 53530 |
Testing of organic materials; Separation test on fabric plies bonded together |
|
DIN 53543 |
Testing of Semi-Rigid Polyurethane (PUR) Integral Cellular Materials; Materials for Soles and Parts of Shoes |
|
DIN 53805 |
Testing of textiles; determination of the length of staple fibres; terminology and general principles |
|
DIN 53835-13 |
Testing of textiles; determination of the elastic behaviour of textile fabrics by a single application of tensile load between constant extension limits |
|
DIN 53835-2 |
Testing of textiles; determination of the elastic behaviour of single and plied elastomeric yarns by repeated application of tensile load between constant extension limits |
|
DIN 53835-3 |
Testing of textiles; determination of the elastic behaviour of single and plied yarns by a single application of tensile load between constant extension limits |
|
DIN 53835-4 |
Testing of textiles; determination of the elastic behaviour of single and plied yarns by a single application of tensile load between constant force limits |
|
DIN 53840-1 |
Testing of textiles; determination of parameters for the crimp of textured filament yarns; filament yarns with a linear density of up to 500 dtex |
|
DIN 53840-2 |
Testing of textiles; determination of parameters for the crimp of textured filament yarns; filament yarns with a linear density exceeding 500 dtex |
|
DIN 53885 |
Determination of textile and textile product compressibility |
|
DIN 53890 |
Testing of Textiles; Determination of the Crease Recovery Angle of Area-measured Textiles; Method Using an Air-dry Specimen with Horizontal Fold and Erected Free Limb |
|
DIN 53943-1 |
Testing of textiles; cotton fibre maturity; concepts |
|
DIN 53943-3 |
Testing of textiles; cotton fibre maturity; determination of the percent maturity; microscopic method using a polarisation microscope |
|
DIN 54332 |
Testing of Textiles; Determination of the Burning Behaviour of Textile Floor Coverings |
|
DIN 55428-1 |
Solid fibreboard - Requirements and testing |
|
DIN 55428-2 |
Wet strength solid fibreboard - Requirements and testing |
|
DIN 55471-1 |
Cellular polystyrene for packaging; requirements and testing |
|
DIN 55471-2 |
Cellular polystyrene for packaging; design of moulded packaging |
|
DIN 55482-1 |
Cellular polyurethane for use in packaging; requirements and testing |
|
DIN 55545-1 |
Packaging - Packaging with insulating properties - Part 1: Initial evaluation testing |
|
DIN 61853-1 |
Textile glass; textile glass mats for plastics reinforcement; technical delivery conditions |
|
DIN 61853-2 |
Textile glass; textile glass mats for plastics reinforcement; classification and application |
|
DIN 61854-1 |
Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; technical delivery conditions |
|
DIN 61854-2 |
Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; types |
|
DIN 66061-1 |
Household Sewing Machines; Requirements on the Operating Characteristics |
|
DIN 6634 |
Means of Packaging; Rolled I-steel for Drums; Dimensions |
|
DIN 68140 |
Wood Finger-jointing |
|
DIN 68140-1 |
Finger joints in wood - Finger-jointed structural timber (softwood) |
|
DIN 68762 |
Chipboard for special purposes in building construction; concepts, requirements, testing |
|
DIN 8809 |
Circular Saw Blades of Tool Steel for Woodworking |
|
DIN EN 1049-2 |
Determination of number of threads per unit length of textile woven fabrics; construction methods of analysis (ISO 7211-2:1984, modified) |
|
DIN EN 1058 |
Wood-based panel products - Determination of characteristic values of mechanical properties and density |
|
DIN EN 12079-1 |
Offshore containers and associated lifting sets - Part 1: Offshore container - Design, manufacture and marking; English version EN 12079-1:2006 |
|
DIN EN 12079-2 |
Offshore containers and associated lifting sets - Part 2: Lifting sets - Design, manufacture and marking; English version EN 12079-2:2006 |
|
DIN EN 12079-3 |
Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing; English version EN 12079-3:2006 |
|
DIN EN 12127 |
Textile fabrics - Determination of mass per unit area using small samples |
|
DIN EN 12225 |
Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test; German version EN 12225:2000 |
|
DIN EN 12249 |
Sawn timber used in pallets - Permitted deviations and guidelines for dimensions |
|
DIN EN 12280-2 |
Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: Effect of light or weathering |
|
DIN EN 12280-3 |
Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing |
|
DIN EN 12375 |
Packaging - Flexible aluminium tubes - Wall thickness determination method |
|
DIN EN 12640 |
Securing of cargo on road vehicles - Lashing points on commerical vehicles for goods transportation - Minimum requirements and testing; English version of DIN EN 12640 |
|
DIN EN 13010 |
Packaging - Unit packaging - Dimensions and requirements for pegboard display |
|
DIN EN 13432 |
Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging; English version of DIN EN 13432 |
|
DIN EN 13592 Berichtigung 1 |
Plastics sacks for household waste collection - Types, requirements and test methods; Corrigenda to DIN EN 13592:2003-07 |
|
DIN EN 13738 |
Geotextiles and geotextile-related products - Determination of pullout resistance in soil |
|
DIN EN 14081-2 |
Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing |
|
DIN EN 14128 |
Durability of wood and wood-based products - Performances criteria for curative wood preservatives as determined by biological tests |
|
DIN EN 1624 |
Burning behaviour of industrial and technical textiles - Procedure to determine the flame spread of vertically oriented specimens |
|
DIN EN 1773 |
Textiles - Fabrics - Determination of width and length; German version EN 1773:1996 |
|
DIN EN 1963 |
Textile floor coverings - Test using the Lisson Tretrad machine |
|
DIN EN 20105-N01 |
Tests for colour fastness of textiles - Colour fastness to bleaching: Hypchlorite (ISO 105-N01:1993) |
|
DIN EN 20811 |
Determination of resistance of textile fabrics to water penetration; hydrostatic pressure test (ISO 811:1981); german version EN 20811:1992 |
|
DIN EN 22313 |
Textiles; determination of the recovery form creasing of a horizontally folded specimen by measuring the angle of recovery (ISO 2313:1972); german version EN 22313:1992 |
|
DIN EN 24920 |
Textiles; determination of resistance to surface wetting (spray test) (ISO 4920:1981); german version EN 24920:1992 |
|
DIN EN 25077 |
Textiles; determination of dimensional change in washing and drying (ISO 5077:1984) |
|
DIN EN 325 |
Wood-based panels; determination of dimensions of test pieces; German version EN 325:1993 |
|
DIN EN 931 |
Footwear manufacturing machines - Lasting machines - Safety requirements |
|
DIN EN ISO 105-A01 |
Tests for colour fastness of textiles - General principles of testing (ISO 105-A01:1994) |
|
DIN EN ISO 105-C06 |
Tests for colour fastness of textiles - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:1994) |
|
DIN EN ISO 105-E01 |
Tests for colour fastness of textiles - Colour fastness to water (ISO 105-E01:1994) |
|
DIN EN ISO 105-E02 |
Tests for colour fastness of textiles - Colour fastness to sea water (ISO 105-E02:1994) |
|
DIN EN ISO 105-E03 |
Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:1994); German version EN ISO 105-E03:1996 |
|
DIN EN ISO 105-E04 |
Tests for colour fastness of textiles - Colour fastness to perspiration(ISO 105-E04:1994) |
|
DIN EN ISO 105-E07 |
Tests for colour fastness of textiles - Part E07: Colour fastness to spotting: Water (ISO 105-E07:1989) |
|
DIN EN ISO 105-N02 |
Tests for colour fastness of textiles - Colour fastness to bleaching: Peroxide (ISO 105-N02:1993) |
|
DIN EN ISO 105-P01 |
Tests for colour fastness of textiles - Colour fastness to dry heat (excluding pressing) (ISO 105-P01:1993) |
|
DIN EN ISO 105-X05 |
Tests for colour fastness of textiles - Part X05: Colour fastness to organic solvents (ISO 105-X05:1994) |
|
DIN EN ISO 105-X12 |
Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:2001) |
|
DIN EN ISO 105-X16 |
Textiles - Tests for colour fastness - Part X16: Colour fastness to rubbing; Small areas (ISO 105-X16:2001) |
|
DIN EN ISO 105-Z01 |
Tests for colour fastness of textiles - Colour fastness to metals in the dyebath: Chromium salts (ISO 105-Z01:1993) |
|
DIN EN ISO 13437 |
Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory use (ISO 13437:1998) |
|
DIN EN ISO 13934-2 |
Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:1999) |
|
DIN EN ISO 13935-1 |
Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:1999) |
|
DIN EN ISO 13935-2 |
Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:1999) |
|
DIN EN ISO 13936-2 |
Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method (ISO 13936-2:2004) |
|
DIN EN ISO 13937-1 |
Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) (ISO 13937-1:2000); English version of DIN EN ISO 13937-1 |
|
DIN EN ISO 13937-2 |
Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) (ISO 13937-2:2000); English version of DIN EN ISO 13937-2 |
|
DIN EN ISO 13937-3 |
Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) (ISO 13937-3:2000); English version of DIN EN ISO 13937-3 |
|
DIN EN ISO 13937-4 |
Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) (ISO 13937-4:2000); English version of DIN EN ISO 13937-4 |
|
DIN EN ISO 13938-1 |
Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999) |
|
DIN EN ISO 14184-1 |
Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde (water extraction method) (ISO 14184-1:1998) |
|
DIN EN ISO 14184-2 |
Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) (ISO 14184-2:1998) |
|
DIN EN ISO 14419 |
Textiles - Oil repellency - Hydrocarbon resistance test (ISO 14419:1998) |
|
DIN EN ISO 15487 |
Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying (ISO 15487:1999); English version of DIN EN ISO 15487 |
|
DIN EN ISO 17070 |
Leather - Chemical tests - Determination of pentachlorophenol content (ISO 17070:2006) |
|
DIN EN ISO 2060 |
Yarn from packages - Determination of linear density (mass per unit length) by the skein method (ISO 2060:1994) |
|
DIN EN ISO 2061 |
Determination of twist in yarns by the direct counting method (ISO 2061:1995) |
|
DIN EN ISO 2062 |
Textile yarns from packages - Determination of single-end breaking force and elongation at break (ISO 2062:1993) |
|
DIN EN ISO 3071 |
Textiles - Determination of pH of aqueous extract (ISO 3071:2005) |
|
DIN EN ISO 3759 |
Preparation, marking and measuring of textile fabric specimens and garments in tests for determination of dimensional change (ISO 3759:1994) |
|
DIN EN ISO 4044 |
Leather - Preparation of chemical test samples (ISO 4044:1977) |
|
DIN EN ISO 4098 |
Leather - Chemical tests - Determination of water-soluble matter, water soluble inorganic matter and water-soluble organic matter (ISO 4098:2006) |
|
DIN EN ISO 5084 |
Determination of thickness of textiles and textile products (ISO 5084:1996) |
|
DIN EN ISO 6330 |
Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2000); English version of DIN EN ISO 6330 |
|
DIN EN ISO 780 |
Packaging - Pictorial marking for handling of goods (ISO 780:1997) |
|
DIN EN ISO 9237 |
Determination of permeability of fabrics to air (ISO 9237:1995) |
|
DIN ISO 15228 |
Textile machinery and accessories - Profile reeds for air jet weaving machines - Dimensions (ISO 15228:2005) |
|
DIN ISO 2076 |
Textiles - Man-made fibres - Generic names (ISO 2076:1999) |
|
DIN ISO 8640-1 |
Textile machinery and accessories - Flat warp knitting machines - Part 1: Vocabulary of basic structure and knitting elements (ISO 8640-1:2004; text in German, English, French) |
|
DIN EN 1001-1 |
Durability of wood and wood-based products - Terminology - Part 1: List of equivalent terms; Trilingual version EN 1001-1:2005 |
|
DIN EN 1001-2 |
Durability of wood and wood-based products - Terminology - Part 2: Vocabulary; Trilingual version EN 1001-2:2005 |
|
DIN EN 1035 |
Tannery machines - Moving platen machinery - Safety requirements |
|
DIN EN 1072 |
Plywood - Description of bending properties of structural plywood |
|
DIN EN 1086 |
Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed |
|
DIN EN 1087-1 |
Particleboard - Determination of moisture resistance - Boil test |
|
DIN EN 1103 |
Textiles - Fabrics for apparel - Detailed procedure to determine the burning behaviour |
|
DIN EN 1128 |
Cemend-bonded particleboard - Determination of hard body impact resistance |
|
DIN EN 1161 |
Feather and down - Method of test for determining the moisture content |
|
DIN EN 1162 |
Feather and down - Method of test for determining the oxygen index number |
|
DIN EN 1163 |
Feather and down - Method of test for determining the oil and fat content |
|
DIN EN 1164 |
Feather and down - Test methods - Determination of the turbidity of an aqueous extract |
|
DIN EN 1165 |
Feather and down - Method of test for determining water-soluble chlorides |
|
DIN EN 1167 |
Feather and down - Method of test for measuring the sizes of quilts filled with feather and/or down |
|
DIN EN 1194 |
Timber structures - Glued laminated timber - Strength classes and determination of characteristic values |
|
DIN EN 120 |
Wood-based panels; determination of formaldehyde content; extraction method called perforator method; german version EN 120:1992 |
|
DIN EN 12044 |
Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
|
DIN EN 12103 |
Resilient floor coverings - Agglomerated cork underlays - Specification |
|
DIN EN 12104 |
Resilient floor coverings - Cork floor tiles - Specification; English version of DIN EN 12104 |
|
DIN EN 12130 |
Feather and down - Test methods - Determination of the filling power (massic volume) |
|
DIN EN 12131 |
Feather and down - Test methods - Determination of the quantitative composition of feather and down (manual method) |
|
DIN EN 12132-1 |
Feather and down - Methods of testing the down-proof properties of fabrics - Part 1: Rubbing test |
|
DIN EN 12132-2 |
Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test (includes Amendment A1:2003) |
|
DIN EN 1218-1 |
Safety of wood working machines - Tenoning machines - Part 1: Single-end tenoning machines with sliding table |
|
DIN EN 1218-2 |
Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains |
|
DIN EN 1218-3 |
Safety of woodworking machines - Tenoning machines - Part 3: Hand-fed tenoning machines with sliding table for cutting structural timbers; English version of DIN EN 1218-3 |
|
DIN EN 1218-4 |
Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) |
|
DIN EN 1218-4/A1 |
Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) |
|
DIN EN 1218-5 |
Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or fed by chain |
|
DIN EN 12203 |
Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
|
DIN EN 12203 Berichtigung 1 |
Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; Corrigendum 1 to English verion of DIN EN 12203:2004-07 |
|
DIN EN 12222 |
Standard atmospheres for conditioning and testing of footwear and components for footwear |
|
DIN EN 12224 |
Geotextiles and geotextile-related products - Determination of the resistance to weathering; English version of DIN EN 12224 |
|
DIN EN 12225 |
Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test; English version of DIN EN 12225 |
|
DIN EN 12226 |
Geotextiles and geotextile-related products - General tests for evaluation following durability testing; English version of DIN EN 12226 |
|
DIN EN 12240 |
Touch and close fasteners - Determination of the overall and effective widths of tapes and the effective width of a closure |
|
DIN EN 12241 |
Touch and close fasteners - Method for closure prior to washing and drying or dry cleaning |
|
DIN EN 12242 |
Touch and close fasteners - Determination of peel strength |
|
DIN EN 12243 |
Touch and close fasteners - Determination of dimensional change in washing and drying and dry cleaning |
|
DIN EN 12246 |
Quality classification of timber used in pallets and packaging |
|
DIN EN 12248 |
Sawn timber used in industrial packaging - Permitted deviations and preferential sizes |
|
DIN EN 1230-1 |
Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour; English version of DIN EN 1230-1 |
|
DIN EN 1230-2 |
Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint); English version of DIN EN 1230-2 |
|
DIN EN 12332-1 |
Rubber- or plastics-coated fabrics - Determination of bursting strength - Part 1: Steel ball method |
|
DIN EN 12332-2 |
Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method |
|
DIN EN 12369-1 |
Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboard and fibreboard; English version of DIN EN 12369-1 |
|
DIN EN 12369-2 |
Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
|
DIN EN 12377 |
Packaging - Flexible tubes - Test method for the tightness of closures |
|
DIN EN 12387 |
Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements |
|
DIN EN 12406 |
Swap bodies - Thermal swap bodies of Class C - Dimensions and general requirements |
|
DIN EN 12410 |
Swap bodies - Thermal swap bodies of Class A - Dimensions and general requirements |
|
DIN EN 12422 |
Sisal twines |
|
DIN EN 12423 |
Polypropylene twines |
|
DIN EN 12447 |
Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water; English version of DIN EN 12447 |
|
DIN EN 12465 |
Wood poles for overhead lines - Durability requirements |
|
DIN EN 12479 |
Wood poles for overhead lines - Sizes - Methods of measurements and limit deviations |
|
DIN EN 12490 |
Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood |
|
DIN EN 12509 |
Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content |
|
DIN EN 12510 |
Wood poles for overhead lines - Strength grading criteria; English version of DIN EN 12510:2001 + AC:2002 |
|
DIN EN 12511 |
Wood poles for overhead lines - Determination of characteristic values |
|
DIN EN 12545 |
Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements; English version of DIN EN 12545 |
|
DIN EN 12562 |
Textiles - Para-aramid multifilament yarns - Test methods |
|
DIN EN 12590 |
Textiles - Industrial sewing threads made wholly or partly from synthetic fibres |
|
DIN EN 1261 |
Fibre ropes for general service - Hemp ropes |
|
DIN EN 12641-2 |
Swap bodies and commercial vehicles - Tarpaulins - Part 2: Minimum requirements for curtainsiders |
|
DIN EN 12653 |
Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements; English version of DIN EN 12653 |
|
DIN EN 12653/A1 |
Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements |
|
DIN EN 12654-1 |
Textile glass - Yarns - Part 1: Designation |
|
DIN EN 12654-2 |
Textile glass - Yarns - Part 2: Methods of test and general specifications |
|
DIN EN 12674-1 |
Roll containers - Part 1: Terminology |
|
DIN EN 12674-2 |
Roll containers - Part 2: General design and safety principles; English version of DIN EN 12674-2 |
|
DIN EN 12674-3 |
Roll containers - Part 3: Test methods |
|
DIN EN 12674-4 |
Roll containers - Part 4: Performance requirements |
|
DIN EN 1269 |
Textile floor coverings - Assessment of impregnations in needled floorcoverings by means of a soiling test; German version EN 1269:1997 |
|
DIN EN 12707 |
Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l; English version of DIN EN 12707 |
|
DIN EN 12708 |
Plug/bung closure systems for plastics containers with a nominal capacity of 20 l to 225 l; English version of DIN EN 12708 |
|
DIN EN 12709 |
Plastics drums - Non-removable head (tight head) circular cross section drums with a nominal capacity of 20 l to 120 l; English version of DIN EN 12709 |
|
DIN EN 12710 |
Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l |
|
DIN EN 12711 |
Steel drums - Non-removable head (tight head) drums with a miniumum total capacity of 230 l; English version of DIN EN 12711 |
|
DIN EN 12712 |
Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilization of pallet sizes 800 mm x 1200 mm, 1000 mm x 1200 mm and 1140 mm x 1140 mm; English version of DIN EN 12712 |
|
DIN EN 12713 |
Screw cap closure systems for plastics containers with a nominal capacity of 20 l to 60 l; English version of DIN EN 12713 |
|
DIN EN 12714 |
Plastics drums - Removable head (open head) drums with a nominal capacity of 25 l to 220 l; English version of DIN EN 12714 |
|
DIN EN 12726 |
Packaging - Cork mouth finish with a bore diatmeter of 18,5 mm for corks and tamper evident capsules; English version of DIN EN 12726 |
|
DIN EN 12744 |
Footwear - Test methods for insoles - Delamination resistance |
|
DIN EN 12745 |
Footwear - Test methods for insoles - Heel pin holding strength |
|
DIN EN 12746 |
Footwear - Test methods for insoles and insocks - Water absorption and desorption (includes Amendment A1:2005) |
|
DIN EN 12747 |
Footwear - Test methods for insoles - Abrasion resistance |
|
DIN EN 12748 |
Footwear - Test methods for outsoles, insoles, lining and insocks - Water soluble content |
|
DIN EN 12749 |
Footwear - Ageing conditioning |
|
DIN EN 12750 |
Safety of woodworking machines - Four-sided moulding machines; English version of DIN EN 12750 |
|
DIN EN 12751 |
Textiles - Sampling of fibres, yarns and fabrics for testing |
|
DIN EN 12759 |
Rubber- or plastic-coated fabrics - Determination of resistance to liquids; English version of DIN EN 12759 |
|
DIN EN 12770 |
Footwear - Test methods for outsoles - Abrasion resistance; English version of DIN EN 12770 |
|
DIN EN 12771 |
Footwear - Test methods for outsoles - Tear strength; English version of DIN EN 12771 |
|
DIN EN 12772 |
Footwear - Test methods for outsoles - Dimensional stability |
|
DIN EN 12773 |
Footwear - Test methods for outsoles - Needle tear strength |
|
DIN EN 12774 |
Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance; English version of DIN EN 12774 |
|
DIN EN 12775 |
Solid wood paneels - Classification and terminology; English version of DIN EN 12775 |
|
DIN EN 12779 |
Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements |
|
DIN EN 12781 |
Wallcoverings - Specification for cork panels;English version of DIN EN 12781 |
|
DIN EN 12782 |
Footwear - Test methods for insoles - Resistance to stitch tear; English version of DIN EN 12782 |
|
DIN EN 12784 |
Footwear - Test methods for whole shoe - Thermal insulation; English version of DIN EN 12784 |
|
DIN EN 12785 |
Footwear - Test methods for whole shoe - Heel attachment; English version of DIN EN 12785 |
|
DIN EN 12800 |
Footwear - Test methods for insoles - Dimensional stability; English version of DIN EN 12800 |
|
DIN EN 12801 |
Footwear - Test methods for insoles, lining and insocks - Perspiration resistance (includes Amendment A1:2001); English version of DIN EN 12801:2000 + A1:2001 |
|
DIN EN 12803 |
Footwear - Test methods for outsoles - Tensile strength and elongation; English version of DIN EN 12803 |
|
DIN EN 12826 |
Footwear - Test methods for lining and insocks - Static friction; English version of DIN EN 12826 |
|
DIN EN 12871 |
Wood-based panels - Performance specifications and requirements for loadbearing boards for use in floors, walls and roofs; English version of DIN EN 12871 |
|
DIN EN 12928 |
Inserted flange type closure systems for steel drums with a total capacity of 17 l to 230 l; English version of DIN EN 12928 |
|
DIN EN 12934 |
Feather and down - Composition labelling of processed feathers and down for use as sole filling material |
|
DIN EN 12935 |
Feather and down - Hygiene and cleanliness requirements; English version of DIN EN 12935 |
|
DIN EN 12940 |
Footwear manufacturing wastes - Waste classification and management |
|
DIN EN 12958 |
Footwear - Test methods for shanks - Fatigue resistance (includes Amendment A1:2004) |
|
DIN EN 12971-1 |
Reinforcements - Specification for textile glass chopped strands - Part 1: Designation |
|
DIN EN 12971-2 |
Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements |
|
DIN EN 12971-3 |
Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements |
|
DIN EN 13002-2 |
Carbon fibre yarns - Part 2: Test methods and general specifications |
|
DIN EN 13003-1 |
Para-aramid fibre filament yarns - Part 1: Designation |
|
DIN EN 13003-2 |
Para-aramid fibre filament yarns - Part 2: Methods of test and general specifications |
|
DIN EN 13003-3 |
Para-aramid fibre filament yarns - Part 3: Technical specifications |
|
DIN EN 13007 |
Steel drums - Non-removable head (tight head) drums with a nominal capacity of 20 l to 60 l; English version of DIN EN 13007 |
|
DIN EN 13008 |
Steel drums - Removable head (open head) drums with a nominal capacity of 15 l to 62 l; English version of DIN EN 13008 |
|
DIN EN 13011 |
Transportation Services - Goods transport chains - System for declaration of performance conditions; English version of DIN EN 13011 |
|
DIN EN 13017-1 |
Solid wood panels - Classification by surface appearance - Part 1: Softwood; English version of DIN EN 13017-1 |
|
DIN EN 13017-2 |
Solid wood panels - Classification by surface appearance - Part 2: Hardwood; English version of DIN EN 13017-2 |
|
DIN EN 13025-1 |
Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml |
|
DIN EN 13025-2 |
Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml |
|
DIN EN 13025-3 |
Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml |
|
DIN EN 13026 |
Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general-use metal containers up to 30000 ml; English version of DIN EN 13026 |
|
DIN EN 13027 |
Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity; English version of DIN EN 13027 |
|
DIN EN 13028 |
Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes; English version of DIN EN 13028 |
|
DIN EN 13029 |
Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures; English version of DIN EN 13029 |
|
DIN EN 13044 |
Swap bodies - Coding, identification and marking; English version of DIN EN 13044:2000 |
|
DIN EN 13045 |
Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances; English version of DIN EN 13045 |
|
DIN EN 13046 |
Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances; English version of DIN EN 13046 |
|
DIN EN 13047 |
Packaging - Flexible conical metallic tubes - Dimensions and tolerances; English version of DIN EN 13047 |
|
DIN EN 13048 |
Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method; English version of DIN EN 13048 |
|
DIN EN 13054 |
Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package; English version of DIN EN 13054 |
|
DIN EN 1307 |
Textile floor coverings - Classification of pile carpets |
|
DIN EN 13073 |
Footwear - Test methods for whole shoe - Water resistance; English version of DIN EN 13073 |
|
DIN EN 13085 |
Wallcoverings - Specifications for cork rolls; English version of DIN EN 13085 |
|
DIN EN 13088 |
Manufactured articles filled with feather and down - Method for the determination of a filled product's total mass and of the mass of the filling; English version of DIN EN 13088 |
|
DIN EN 1309-1 |
Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber |
|
DIN EN 1309-2 |
Round and sawn timber - Method of measurement of dimensions - Part 2: Round timber - Requirements for measurement and volume calculation rules |
|
DIN EN 1310 |
Round and sawn timber - Method of measurement of features |
|
DIN EN 1311 |
Round and sawn timber - Method of measurement of biological degradation |
|
DIN EN 13112 |
Tannery machines - Splitting and bandknife shearing machines - Safety requirements |
|
DIN EN 13113 |
Tannery machines - Roller coating machines - Safety requirements |
|
DIN EN 13114 |
Tannery machines - Rotating process vessels - Safety requirements |
|
DIN EN 13117-1 |
Transport packaging - Reusable, rigid plastics distribution boxes - Part 1: General purpose application; English version of DIN EN 13117-1 |
|
DIN EN 13117-2 |
Transport packaging - Reusable, rigid plastics distribution boxes - Part 2: General specifications for testing; English version of DIN EN 13117-2 |
|
DIN EN 1312 |
Round and sawn timber - Determination of the batch volume of sawn timber |
|
DIN EN 1313-1 |
Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber (includes Amendment A1:1999) |
|
DIN EN 1313-2 |
Round and sawn timber - Permitted deviations and preferred sizes - Part 2: Hardwood sawn timber |
|
DIN EN 13145 |
Railway applications - Track - Wood sleepers and bearers; English version of DIN EN 13145 |
|
DIN EN 1315-1 |
Dimensional classification of timber - Part 1: Hardwood round timber |
|
DIN EN 1315-2 |
Dimensional classification of timber - Part 2: Softwood round timber |
|
DIN EN 1316-1 |
Hardwood round timber - Qualitative classification - Part 1: Oak and beech |
|
DIN EN 1316-2 |
Hardwood round timber - Qualitative classification - Part 2: Poplar |
|
DIN EN 1316-3 |
Hardwood round timber - Qualitative classification - Part 3: Ash and maples |
|
DIN EN 1318 |
Textile floor coverings - Determination of the apparent effective thickness of the backing |
|
DIN EN 13183-1 |
Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method |
|
DIN EN 13183-2 |
Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method |